/*
 * clock_am43xx.c
 *
 * clocks for AM43XX based boards
 * Derived from AM33XX based boards
 *
 * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clock.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>

struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER;
struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP;
struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL;

const struct dpll_regs dpll_mpu_regs = {
	.cm_clkmode_dpll	= CM_WKUP + 0x560,
	.cm_idlest_dpll		= CM_WKUP + 0x564,
	.cm_clksel_dpll		= CM_WKUP + 0x56c,
	.cm_div_m2_dpll		= CM_WKUP + 0x570,
};

const struct dpll_regs dpll_core_regs = {
	.cm_clkmode_dpll	= CM_WKUP + 0x520,
	.cm_idlest_dpll		= CM_WKUP + 0x524,
	.cm_clksel_dpll		= CM_WKUP + 0x52C,
	.cm_div_m4_dpll		= CM_WKUP + 0x538,
	.cm_div_m5_dpll		= CM_WKUP + 0x53C,
	.cm_div_m6_dpll		= CM_WKUP + 0x540,
};

const struct dpll_regs dpll_per_regs = {
	.cm_clkmode_dpll	= CM_WKUP + 0x5E0,
	.cm_idlest_dpll		= CM_WKUP + 0x5E4,
	.cm_clksel_dpll		= CM_WKUP + 0x5EC,
	.cm_div_m2_dpll		= CM_WKUP + 0x5F0,
};

const struct dpll_regs dpll_ddr_regs = {
	.cm_clkmode_dpll	= CM_WKUP + 0x5A0,
	.cm_idlest_dpll		= CM_WKUP + 0x5A4,
	.cm_clksel_dpll		= CM_WKUP + 0x5AC,
	.cm_div_m2_dpll		= CM_WKUP + 0x5B0,
	.cm_div_m4_dpll		= CM_WKUP + 0x5B8,
};

void setup_clocks_for_console(void)
{
	u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED;

	/* Do not add any spl_debug prints in this function */
	clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
			CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
			CD_CLKCTRL_CLKTRCTRL_SHIFT);

	/* Enable UART0 */
	clrsetbits_le32(&cmwkup->wkup_uart0ctrl,
			MODULE_CLKCTRL_MODULEMODE_MASK,
			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
			MODULE_CLKCTRL_MODULEMODE_SHIFT);

	while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) ||
		(idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) {
		clkctrl = readl(&cmwkup->wkup_uart0ctrl);
		idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
			 MODULE_CLKCTRL_IDLEST_SHIFT;
	}
}

void enable_basic_clocks(void)
{
	u32 *const clk_domains[] = {
		&cmper->l3clkstctrl,
		&cmper->l3sclkstctrl,
		&cmper->l4lsclkstctrl,
		&cmwkup->wkclkstctrl,
		&cmper->emifclkstctrl,
		0
	};

	u32 *const clk_modules_explicit_en[] = {
		&cmper->l3clkctrl,
		&cmper->l4lsclkctrl,
		&cmper->l4fwclkctrl,
		&cmwkup->wkl4wkclkctrl,
		&cmper->l3instrclkctrl,
		&cmper->l4hsclkctrl,
		&cmwkup->wkgpio0clkctrl,
		&cmwkup->wkctrlclkctrl,
		&cmper->timer2clkctrl,
		&cmper->gpmcclkctrl,
		&cmper->elmclkctrl,
		&cmper->mmc0clkctrl,
		&cmper->mmc1clkctrl,
		&cmwkup->wkup_i2c0ctrl,
		&cmper->gpio1clkctrl,
		&cmper->gpio2clkctrl,
		&cmper->gpio3clkctrl,
		&cmper->gpio4clkctrl,
		&cmper->gpio5clkctrl,
		&cmper->i2c1clkctrl,
		&cmper->cpgmac0clkctrl,
		&cmper->emiffwclkctrl,
		&cmper->emifclkctrl,
		&cmper->otfaemifclkctrl,
		&cmper->qspiclkctrl,
		&cmper->spi0clkctrl,
		0
	};

	do_enable_clocks(clk_domains, clk_modules_explicit_en, 1);

	/* Select the Master osc clk as Timer2 clock source */
	writel(0x1, &cmdpll->clktimer2clk);

	/* For OPP100 the mac clock should be /5. */
	writel(0x4, &cmdpll->clkselmacclk);
}

#ifdef CONFIG_TI_EDMA3
void enable_edma3_clocks(void)
{
	u32 *const clk_domains_edma3[] = {
		0
	};

	u32 *const clk_modules_explicit_en_edma3[] = {
		&cmper->tpccclkctrl,
		&cmper->tptc0clkctrl,
		0
	};

	do_enable_clocks(clk_domains_edma3,
			 clk_modules_explicit_en_edma3,
			 1);
}

void disable_edma3_clocks(void)
{
	u32 *const clk_domains_edma3[] = {
		0
	};

	u32 *const clk_modules_disable_edma3[] = {
		&cmper->tpccclkctrl,
		&cmper->tptc0clkctrl,
		0
	};

	do_disable_clocks(clk_domains_edma3,
			  clk_modules_disable_edma3,
			  1);
}
#endif

#ifdef CONFIG_USB_DWC3
void enable_usb_clocks(int index)
{
	u32 *usbclkctrl = 0;
	u32 *usbphyocp2scpclkctrl = 0;

	if (index == 0) {
		usbclkctrl = &cmper->usb0clkctrl;
		usbphyocp2scpclkctrl = &cmper->usbphyocp2scp0clkctrl;
		setbits_le32(&cmper->usb0clkctrl,
			     USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960);
		setbits_le32(&cmwkup->usbphy0clkctrl,
			     USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K);
	} else if (index == 1) {
		usbclkctrl = &cmper->usb1clkctrl;
		usbphyocp2scpclkctrl = &cmper->usbphyocp2scp1clkctrl;
		setbits_le32(&cmper->usb1clkctrl,
			     USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960);
		setbits_le32(&cmwkup->usbphy1clkctrl,
			     USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K);
	}

	u32 *const clk_domains_usb[] = {
		0
	};

	u32 *const clk_modules_explicit_en_usb[] = {
		usbclkctrl,
		usbphyocp2scpclkctrl,
		0
	};

	do_enable_clocks(clk_domains_usb, clk_modules_explicit_en_usb, 1);
}

void disable_usb_clocks(int index)
{
	u32 *usbclkctrl = 0;
	u32 *usbphyocp2scpclkctrl = 0;

	if (index == 0) {
		usbclkctrl = &cmper->usb0clkctrl;
		usbphyocp2scpclkctrl = &cmper->usbphyocp2scp0clkctrl;
		clrbits_le32(&cmper->usb0clkctrl,
			     USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960);
		clrbits_le32(&cmwkup->usbphy0clkctrl,
			     USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K);
	} else if (index == 1) {
		usbclkctrl = &cmper->usb1clkctrl;
		usbphyocp2scpclkctrl = &cmper->usbphyocp2scp1clkctrl;
		clrbits_le32(&cmper->usb1clkctrl,
			     USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960);
		clrbits_le32(&cmwkup->usbphy1clkctrl,
			     USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K);
	}

	u32 *const clk_domains_usb[] = {
		0
	};

	u32 *const clk_modules_disable_usb[] = {
		usbclkctrl,
		usbphyocp2scpclkctrl,
		0
	};

	do_disable_clocks(clk_domains_usb, clk_modules_disable_usb, 1);
}
#endif