/*
 * Copyright (c) 2018, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/dts-v1/;
#include "ipq40xx-soc.dtsi"
#include <dt-bindings/qcom/gpio-ipq40xx.h>
#include "nand_gpio.dtsi"
/ {
	model ="QCA, IPQ40xx-DK06";
	compatible = "qca,ipq40xx", "qca,ipq40xx-dk06";

	machid = <0x8010005>;
	ddr_size = <256>;
	config_name = "config@ap.dk06.1-c1";

	aliases {
		console = "/serial@78af000";
		xhci0 = "/xhci@8a00000";
		xhci1 = "/xhci@6000000";
	};

	serial@78af000 {
		serial_gpio {
			gpio1 {
				gpio = <16>;
				func = <1>;
				pull = <GPIO_PULL_DOWN>;
				oe = <GPIO_OE_ENABLE>;
			};

			gpio2 {
				gpio = <17>;
				func = <1>;
				oe = <GPIO_OE_ENABLE>;
			};
		};
	};

	nand@79B0000 {
		status = "ok";
		nand_gpio {
			gpio18 {
				gpio = <61>;
				func = <1>;
				pull = <GPIO_PULL_DOWN>;
				vm = <GPIO_VM_ENABLE>;
				pu_res = <GPIO_PULL_RES2>;
			};
		};
	};

	spi {
		status = "ok";
		spi_gpio {
			gpio1 {
				gpio = <12>;
				func = <1>;
				pull = <GPIO_PULL_UP>;
				vm = <GPIO_VM_ENABLE>;
				pu_res = <GPIO_PULL_RES2>;
			};

			gpio2 {
				gpio = <13>;
				func = <1>;
				pull = <GPIO_PULL_UP>;
				vm = <GPIO_VM_ENABLE>;
				pu_res = <GPIO_PULL_RES2>;
			};

			gpio3 {
				gpio = <14>;
				func = <1>;
				pull = <GPIO_PULL_UP>;
				vm = <GPIO_VM_ENABLE>;
				pu_res = <GPIO_PULL_RES2>;
			};

			gpio4 {
				gpio = <15>;
				func = <1>;
				pull = <GPIO_PULL_UP>;
				vm = <GPIO_VM_ENABLE>;
				pu_res = <GPIO_PULL_RES2>;
			};
		};
	};

	edma_cfg {
		unit = <0>;
		/* Based on the enum for PSGMII phy interface from include/phy.h */
		phy = <13>;
		phy_name = "IPQ MDIO0";
	};

	ess-switch@c000000{
		sw_gpio {
			gpio1 {
				gpio = <6>;
				func = <1>;
				pull = <GPIO_PULL_UP>;
				vm = <GPIO_VM_ENABLE>;
				pu_res = <GPIO_PULL_RES2>;
			};

			gpio2 {
				gpio = <7>;
				func = <1>;
				pull = <GPIO_PULL_UP>;
				vm = <GPIO_VM_ENABLE>;
				pu_res = <GPIO_PULL_RES2>;
			};

			gpio3 {
				gpio = <19>;
				pull = <GPIO_PULL_DOWN>;
				oe = <GPIO_OE_ENABLE>;
				vm = <GPIO_VM_ENABLE>;
				pu_res = <GPIO_PULL_RES2>;
			};

			gpio4 {
				gpio = <52>;
				pull = <GPIO_PULL_UP>;
				vm = <GPIO_VM_ENABLE>;
				pu_res = <GPIO_PULL_RES2>;
			};
		};
	};
};