/*
 * K2E EVM : Board initialization
 *
 * (C) Copyright 2014
 *     Texas Instruments Incorporated, <www.ti.com>
 *
 * SPDX-License-Identifier:     GPL-2.0+
 */

#include <common.h>
#include <asm/arch/ddr3.h>
#include <asm/arch/hardware.h>
#include <asm/ti-common/keystone_net.h>

DECLARE_GLOBAL_DATA_PTR;

unsigned int external_clk[ext_clk_count] = {
	[sys_clk]	= 100000000,
	[alt_core_clk]	= 100000000,
	[pa_clk]	= 100000000,
	[ddr3a_clk]	= 100000000,
};

static struct pll_init_data core_pll_config[NUM_SPDS] = {
	[SPD800]	= CORE_PLL_800,
	[SPD850]	= CORE_PLL_850,
	[SPD1000]	= CORE_PLL_1000,
	[SPD1250]	= CORE_PLL_1250,
	[SPD1350]	= CORE_PLL_1350,
	[SPD1400]	= CORE_PLL_1400,
	[SPD1500]	= CORE_PLL_1500,
};

/* DEV and ARM speed definitions as specified in DEVSPEED register */
int speeds[DEVSPEED_NUMSPDS] = {
	SPD850,
	SPD1000,
	SPD1250,
	SPD1350,
	SPD1400,
	SPD1500,
	SPD1400,
	SPD1350,
	SPD1250,
	SPD1000,
	SPD850,
	SPD800,
};

s16 divn_val[16] = {
	0, 0, 1, 4, 23, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
};

static struct pll_init_data pa_pll_config =
	PASS_PLL_1000;

struct pll_init_data *get_pll_init_data(int pll)
{
	int speed;
	struct pll_init_data *data;

	switch (pll) {
	case MAIN_PLL:
		speed = get_max_dev_speed();
		data = &core_pll_config[speed];
		break;
	case PASS_PLL:
		data = &pa_pll_config;
		break;
	default:
		data = NULL;
	}

	return data;
}

#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET
struct eth_priv_t eth_priv_cfg[] = {
	{
		.int_name        = "K2E_EMAC0",
		.rx_flow         = 0,
		.phy_addr        = 0,
		.slave_port      = 1,
		.sgmii_link_type = SGMII_LINK_MAC_PHY,
		.phy_if          = PHY_INTERFACE_MODE_SGMII,
	},
	{
		.int_name        = "K2E_EMAC1",
		.rx_flow         = 8,
		.phy_addr        = 1,
		.slave_port      = 2,
		.sgmii_link_type = SGMII_LINK_MAC_PHY,
		.phy_if          = PHY_INTERFACE_MODE_SGMII,
	},
	{
		.int_name        = "K2E_EMAC2",
		.rx_flow         = 16,
		.phy_addr        = 2,
		.slave_port      = 3,
		.sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
		.phy_if          = PHY_INTERFACE_MODE_SGMII,
	},
	{
		.int_name        = "K2E_EMAC3",
		.rx_flow         = 24,
		.phy_addr        = 3,
		.slave_port      = 4,
		.sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
		.phy_if          = PHY_INTERFACE_MODE_SGMII,
	},
	{
		.int_name        = "K2E_EMAC4",
		.rx_flow         = 32,
		.phy_addr        = 4,
		.slave_port      = 5,
		.sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
		.phy_if          = PHY_INTERFACE_MODE_SGMII,
	},
	{
		.int_name        = "K2E_EMAC5",
		.rx_flow         = 40,
		.phy_addr        = 5,
		.slave_port      = 6,
		.sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
		.phy_if          = PHY_INTERFACE_MODE_SGMII,
	},
	{
		.int_name        = "K2E_EMAC6",
		.rx_flow         = 48,
		.phy_addr        = 6,
		.slave_port      = 7,
		.sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
		.phy_if          = PHY_INTERFACE_MODE_SGMII,
	},
	{
		.int_name        = "K2E_EMAC7",
		.rx_flow         = 56,
		.phy_addr        = 7,
		.slave_port      = 8,
		.sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
		.phy_if          = PHY_INTERFACE_MODE_SGMII,
	},
};

int get_num_eth_ports(void)
{
	return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t);
}
#endif

#if defined(CONFIG_BOARD_EARLY_INIT_F)
int board_early_init_f(void)
{
	init_plls();

	return 0;
}
#endif

#ifdef CONFIG_SPL_BUILD
void spl_init_keystone_plls(void)
{
	init_plls();
}
#endif