/*
 * (C) Copyright 2000-2009
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 *  Definitions for Command Processor
 */
#ifndef __COMMAND_H
#define __COMMAND_H

#include <linker_lists.h>

#ifndef NULL
#define NULL	0
#endif

/* Default to a width of 8 characters for help message command width */
#ifndef CONFIG_SYS_HELP_CMD_WIDTH
#define CONFIG_SYS_HELP_CMD_WIDTH	8
#endif

#ifndef	__ASSEMBLY__
/*
 * Monitor Command Table
 */

struct cmd_tbl_s {
	char		*name;		/* Command Name			*/
	int		maxargs;	/* maximum number of arguments	*/
	int		repeatable;	/* autorepeat allowed?		*/
					/* Implementation function	*/
	int		(*cmd)(struct cmd_tbl_s *, int, int, char * const []);
	char		*usage;		/* Usage message	(short)	*/
#ifdef	CONFIG_SYS_LONGHELP
	char		*help;		/* Help  message	(long)	*/
#endif
#ifdef CONFIG_AUTO_COMPLETE
	/* do auto completion on the arguments */
	int		(*complete)(int argc, char * const argv[], char last_char, int maxv, char *cmdv[]);
#endif
};

typedef struct cmd_tbl_s	cmd_tbl_t;


#if defined(CONFIG_CMD_RUN)
extern int do_run(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
#endif

/* common/command.c */
int _do_help (cmd_tbl_t *cmd_start, int cmd_items, cmd_tbl_t * cmdtp, int
	      flag, int argc, char * const argv[]);
cmd_tbl_t *find_cmd(const char *cmd);
cmd_tbl_t *find_cmd_tbl (const char *cmd, cmd_tbl_t *table, int table_len);

extern int cmd_usage(const cmd_tbl_t *cmdtp);

#ifdef CONFIG_AUTO_COMPLETE
extern int var_complete(int argc, char * const argv[], char last_char, int maxv, char *cmdv[]);
extern int cmd_auto_complete(const char *const prompt, char *buf, int *np, int *colp);
#endif

/**
 * cmd_process_error() - report and process a possible error
 *
 * @cmdtp: Command which caused the error
 * @err: Error code (0 if none, -ve for error, like -EIO)
 * @return 0 if there is not error, 1 (CMD_RET_FAILURE) if an error is found
 */
int cmd_process_error(cmd_tbl_t *cmdtp, int err);

/*
 * Monitor Command
 *
 * All commands use a common argument format:
 *
 * void function (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
 */

#if defined(CONFIG_CMD_MEMORY)		\
	|| defined(CONFIG_CMD_I2C)	\
	|| defined(CONFIG_CMD_ITEST)	\
	|| defined(CONFIG_CMD_PCI)	\
	|| defined(CONFIG_CMD_PORTIO)
#define CMD_DATA_SIZE
extern int cmd_get_data_size(char* arg, int default_size);
#endif

#ifdef CONFIG_CMD_BOOTD
extern int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
#endif
#ifdef CONFIG_CMD_BOOTM
extern int do_bootm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
extern int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd);
#else
static inline int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd)
{
	return 0;
}
#endif

extern int do_bootz(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);

extern int do_booti(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);

extern int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc,
			   char *const argv[]);

extern int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);

#if defined(CONFIG_SMP_CMD_SUPPORT)
extern int do_runmulticore(cmd_tbl_t *cmdtp,
			   int flag, int argc, char *const argv[]);
#endif

/*
 * Error codes that commands return to cmd_process(). We use the standard 0
 * and 1 for success and failure, but add one more case - failure with a
 * request to call cmd_usage(). But the cmd_process() function handles
 * CMD_RET_USAGE itself and after calling cmd_usage() it will return 1.
 * This is just a convenience for commands to avoid them having to call
 * cmd_usage() all over the place.
 */
enum command_ret_t {
	CMD_RET_SUCCESS,	/* 0 = Success */
	CMD_RET_FAILURE,	/* 1 = Failure */
	CMD_RET_CRASH_DUMP,	/* 2 = Crash dump */
	CMD_RET_USAGE = -1,	/* Failure, please report 'usage' error */
};

/**
 * Process a command with arguments. We look up the command and execute it
 * if valid. Otherwise we print a usage message.
 *
 * @param flag		Some flags normally 0 (see CMD_FLAG_.. above)
 * @param argc		Number of arguments (arg 0 must be the command text)
 * @param argv		Arguments
 * @param repeatable	This function sets this to 0 if the command is not
 *			repeatable. If the command is repeatable, the value
 *			is left unchanged.
 * @param ticks		If ticks is not null, this function set it to the
 *			number of ticks the command took to complete.
 * @return 0 if the command succeeded, 1 if it failed
 */
int cmd_process(int flag, int argc, char * const argv[],
			       int *repeatable, unsigned long *ticks);

void fixup_cmdtable(cmd_tbl_t *cmdtp, int size);
#endif	/* __ASSEMBLY__ */

/*
 * Command Flags:
 */
#define CMD_FLAG_REPEAT		0x0001	/* repeat last command		*/
#define CMD_FLAG_BOOTD		0x0002	/* command is from bootd	*/
#define CMD_FLAG_ENV		0x0004	/* command is from the environment */
#define CMD_FLAG_SEC_CORE	0x0008  /* command is from secondary core */

#ifdef CONFIG_AUTO_COMPLETE
# define _CMD_COMPLETE(x) x,
#else
# define _CMD_COMPLETE(x)
#endif
#ifdef CONFIG_SYS_LONGHELP
# define _CMD_HELP(x) x,
#else
# define _CMD_HELP(x)
#endif

#define U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd,		\
				_usage, _help, _comp)			\
		{ #_name, _maxargs, _rep, _cmd, _usage,			\
			_CMD_HELP(_help) _CMD_COMPLETE(_comp) }

#define U_BOOT_CMD_MKENT(_name, _maxargs, _rep, _cmd, _usage, _help)	\
	U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd,		\
					_usage, _help, NULL)

#define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, _comp) \
	ll_entry_declare(cmd_tbl_t, _name, cmd) =			\
		U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd,	\
						_usage, _help, _comp);

#define U_BOOT_CMD(_name, _maxargs, _rep, _cmd, _usage, _help)		\
	U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, NULL)

#endif	/* __COMMAND_H */