| This is a set of shell scripts for testing Ethernet bridging. |
| |
| mkbr makes a simple bridge and clones the ip address. |
| rmbr removes bridge |
| |
| The functional test needs two ethernets (eth0, eth1, |
| and the dummy network device. It may screw up your route |
| table. Also, it leaves eth0 in an bad state if test fails. |
| |
| The stresstest needs two ethernets (eth0 and eth1). |
| For highest stress, traffic should be sent over the bridge |
| while the test is ongoing. The goal is to exercise, races |
| that occur when traffic is flowing while management operations occur. |
| |
