| #!/bin/sh |
| |
| # Copyright © 2016 Collabora Ltd. |
| # |
| # Permission is hereby granted, free of charge, to any person |
| # obtaining a copy of this software and associated documentation files |
| # (the "Software"), to deal in the Software without restriction, |
| # including without limitation the rights to use, copy, modify, merge, |
| # publish, distribute, sublicense, and/or sell copies of the Software, |
| # and to permit persons to whom the Software is furnished to do so, |
| # subject to the following conditions: |
| # |
| # The above copyright notice and this permission notice shall be |
| # included in all copies or substantial portions of the Software. |
| # |
| # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| # EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| # MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| # NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| # BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| # ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| # CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| # SOFTWARE. |
| |
| set -e |
| set -x |
| |
| export DBUS_DEBUG_OUTPUT=1 |
| echo "# dbus-daemon binary: ${DBUS_TEST_DAEMON:=dbus-daemon}" |
| echo "# dbus-launch binary: ${DBUS_TEST_DBUS_LAUNCH:=dbus-launch}" |
| echo "# dbus-monitor binary: ${DBUS_TEST_DBUS_LAUNCH:=dbus-monitor}" |
| echo "# dbus-send binary: ${DBUS_TEST_DBUS_SEND:=dbus-send}" |
| echo "# dbus-uuidgen binary: ${DBUS_TEST_DBUS_UUIDGEN:=dbus-uuidgen}" |
| |
| if test -n "$DBUS_TEST_DATA"; then |
| echo "# test data: $DBUS_TEST_DATA" |
| bus_config="--config-file=$DBUS_TEST_DATA/valid-config-files/session.conf" |
| launch_config="$bus_config" |
| elif test -n "$DBUS_TEST_DATADIR"; then |
| echo "# datadir: $DBUS_TEST_DATADIR" |
| bus_config="--config-file=$DBUS_TEST_DATADIR/dbus-1/session.conf" |
| launch_config="$bus_config" |
| else |
| echo "# using standard session bus configuration" |
| bus_config="--session" |
| # dbus-launch doesn't accept --session so add a harmless command-line |
| # argument |
| launch_config="--sh-syntax" |
| fi |
| |
| if ! "${DBUS_TEST_DBUS_UUIDGEN}" --get >/dev/null; then |
| if test -n "$DBUS_TEST_UNINSTALLED"; then |
| echo "1..0 # SKIP - Unable to test dbus-launch without a machine ID" |
| exit 0 |
| else |
| echo "Bail out! dbus not correctly installed: no machine ID" |
| exit 1 |
| fi |
| fi |
| |
| if ! workdir="$(mktemp -d)"; then |
| echo "1..0 # SKIP - mktemp -d doesn't work" |
| exit 0 |
| fi |
| |
| if ! xvfb-run --auto-servernum true; then |
| echo "1..0 # SKIP - xvfb-run doesn't work" |
| exit 0 |
| fi |
| |
| test_num=0 |
| x_session_pid= |
| unset DISPLAY |
| unset XAUTHORITY |
| |
| start_xvfb () { |
| rm -f "$workdir/display" |
| rm -f "$workdir/ready" |
| rm -f "$workdir/x-session-pid" |
| rm -f "$workdir/xauthority" |
| rm -f "$workdir/xvfb-done" |
| |
| # Run an X session in the background for up to 5 minutes. |
| ( |
| set +e |
| xvfb-run --auto-servernum \ |
| sh -c 'echo "$$" > "$1/x-session-pid"; echo "$XAUTHORITY" > "$1/xauthority"; echo "$DISPLAY" > "$1/display"; touch "$1/ready"; exec sleep 300' \ |
| sh "$workdir" |
| touch "$workdir/xvfb-done" |
| ) & |
| |
| tries=0 |
| while ! [ -e "$workdir/ready" ]; do |
| if [ $tries -ge 10 ]; then |
| echo "# Failed to start xvfb-run within $tries seconds" |
| exit 1 |
| fi |
| tries=$(($tries + 1)) |
| sleep 1 |
| done |
| |
| x_session_pid="$(cat "$workdir/x-session-pid")" |
| export DISPLAY="$(cat "$workdir/display")" |
| export XAUTHORITY="$(cat "$workdir/xauthority")" |
| kill -0 "$x_session_pid" |
| } |
| |
| test_disconnection () { |
| rm -f "$workdir/disconnected" |
| ( |
| set +e |
| ${DBUS_TEST_DBUS_MONITOR} > "$workdir/dbus-monitor.log" 2>&1 |
| touch "$workdir/disconnected" |
| ) & |
| |
| kill "$x_session_pid" |
| |
| tries=0 |
| while ! [ -e "$workdir/disconnected" ]; do |
| if [ $tries -ge 10 ]; then |
| echo "# dbus-monitor was not disconnected within $tries seconds" >&2 |
| exit 1 |
| fi |
| tries=$(($tries + 1)) |
| sleep 1 |
| done |
| |
| tries=0 |
| while ! [ -e "$workdir/xvfb-done" ]; do |
| if [ $tries -ge 10 ]; then |
| echo "# xvfb-run did not exit within $tries seconds" >&2 |
| exit 1 |
| fi |
| tries=$(($tries + 1)) |
| sleep 1 |
| done |
| } |
| |
| test_exit_with_x11 () { |
| arg="$1" |
| unset DBUS_SESSION_BUS_ADDRESS |
| unset DBUS_SESSION_BUS_PID |
| unset DBUS_SESSION_BUS_WINDOWID |
| |
| start_xvfb |
| eval "$($DBUS_TEST_DBUS_LAUNCH --sh-syntax "$arg" "$launch_config" </dev/null)" |
| |
| test -n "$DBUS_SESSION_BUS_ADDRESS" |
| env | grep '^DBUS_SESSION_BUS_ADDRESS=' |
| |
| test -n "$DBUS_SESSION_BUS_PID" |
| test "x$(env | grep '^DBUS_SESSION_BUS_PID=')" = "x" |
| kill -0 "$DBUS_SESSION_BUS_PID" |
| |
| test -n "$DBUS_SESSION_BUS_WINDOWID" |
| test "x$(env | grep '^DBUS_SESSION_BUS_WINDOWID=')" = "x" |
| |
| ${DBUS_TEST_DBUS_SEND} --session --dest=org.freedesktop.DBus \ |
| --type=method_call --print-reply / org.freedesktop.DBus.ListNames >&2 |
| |
| test_disconnection |
| |
| test_num=$(($test_num + 1)) |
| echo "ok ${test_num} - dbus-launch $arg" |
| } |
| |
| test_autolaunch () { |
| unset DBUS_SESSION_BUS_ADDRESS |
| unset DBUS_SESSION_BUS_PID |
| unset DBUS_SESSION_BUS_WINDOWID |
| unset XDG_RUNTIME_DIR |
| fake_uuid="ffffffffffffffffffffffffffffffff" |
| |
| start_xvfb |
| eval "$($DBUS_TEST_DBUS_LAUNCH --sh-syntax --autolaunch=${fake_uuid} "$launch_config" </dev/null)" |
| |
| test -n "$DBUS_SESSION_BUS_ADDRESS" |
| env | grep '^DBUS_SESSION_BUS_ADDRESS=' |
| |
| test -n "$DBUS_SESSION_BUS_PID" |
| test "x$(env | grep '^DBUS_SESSION_BUS_PID=')" = "x" |
| kill -0 "$DBUS_SESSION_BUS_PID" |
| |
| test -n "$DBUS_SESSION_BUS_WINDOWID" |
| test "x$(env | grep '^DBUS_SESSION_BUS_WINDOWID=')" = "x" |
| |
| # It is idempotent |
| old_address="$DBUS_SESSION_BUS_ADDRESS" |
| old_pid="$DBUS_SESSION_BUS_PID" |
| old_window="$DBUS_SESSION_BUS_WINDOWID" |
| eval "$($DBUS_TEST_DBUS_LAUNCH --sh-syntax --autolaunch=${fake_uuid} "$launch_config" </dev/null)" |
| test "$DBUS_SESSION_BUS_ADDRESS" = "$old_address" |
| test "$DBUS_SESSION_BUS_PID" = "$old_pid" |
| test "$DBUS_SESSION_BUS_WINDOWID" = "$old_window" |
| |
| ${DBUS_TEST_DBUS_SEND} --session --dest=org.freedesktop.DBus \ |
| --type=method_call --print-reply / org.freedesktop.DBus.ListNames >&2 |
| |
| test_disconnection |
| |
| test_num=$(($test_num + 1)) |
| echo "ok ${test_num} - dbus-launch --autolaunch" |
| } |
| |
| test_xdg_runtime_dir () { |
| unset DBUS_SESSION_BUS_ADDRESS |
| unset DBUS_SESSION_BUS_PID |
| unset DBUS_SESSION_BUS_WINDOWID |
| export XDG_RUNTIME_DIR="$workdir" |
| fake_uuid="ffffffffffffffffffffffffffffffff" |
| |
| if echo "$workdir" | grep '[^-0-9A-Za-z_/.]'; then |
| test_num=$(($test_num + 1)) |
| echo "ok ${test_num} # SKIP - $workdir would need escaping" |
| return |
| fi |
| |
| ${DBUS_TEST_DAEMON} "$bus_config" --address="unix:path=$XDG_RUNTIME_DIR/bus" --print-pid=9 --fork 9>"$workdir/bus-pid" |
| bus_pid="$(cat "$workdir/bus-pid")" |
| kill -0 "$bus_pid" |
| |
| start_xvfb |
| eval "$($DBUS_TEST_DBUS_LAUNCH --sh-syntax --autolaunch=${fake_uuid} "$launch_config" </dev/null)" |
| |
| env | grep '^DBUS_SESSION_BUS_ADDRESS=' |
| test "$DBUS_SESSION_BUS_ADDRESS" = "unix:path=$XDG_RUNTIME_DIR/bus" |
| |
| # When dbus-launch picks up the address from XDG_RUNTIME_DIR/bus, it |
| # doesn't know the pid |
| test -z "$DBUS_SESSION_BUS_PID" |
| |
| # It still knows which window it stashed the information in |
| test -n "$DBUS_SESSION_BUS_WINDOWID" |
| test "x$(env | grep '^DBUS_SESSION_BUS_WINDOWID=')" = "x" |
| |
| ${DBUS_TEST_DBUS_SEND} --session --dest=org.freedesktop.DBus \ |
| --type=method_call --print-reply / org.freedesktop.DBus.ListNames >&2 |
| |
| kill "$x_session_pid" |
| |
| tries=0 |
| while ! [ -e "$workdir/xvfb-done" ]; do |
| if [ $tries -ge 10 ]; then |
| echo "# xvfb-run did not exit within $tries seconds" >&2 |
| exit 1 |
| fi |
| tries=$(($tries + 1)) |
| sleep 1 |
| done |
| |
| # dbus-launch has gone but the dbus-daemon is still alive |
| ${DBUS_TEST_DBUS_SEND} --session --dest=org.freedesktop.DBus \ |
| --type=method_call --print-reply / org.freedesktop.DBus.ListNames >&2 |
| |
| kill "$bus_pid" |
| |
| test_num=$(($test_num + 1)) |
| echo "ok ${test_num} - dbus-launch --autolaunch with XDG_RUNTIME_DIR" |
| } |
| |
| echo "1..4" |
| test_exit_with_x11 --exit-with-session |
| test_exit_with_x11 --exit-with-x11 |
| test_autolaunch |
| test_xdg_runtime_dir |
| |
| # vim:set sw=4 sts=4 et: |