/*
 * Misc useful os-independent macros and functions.
 *
 * Copyright (C) 1999-2016, Broadcom Corporation
 * 
 *      Unless you and Broadcom execute a separate written software license
 * agreement governing use of this software, this software is licensed to you
 * under the terms of the GNU General Public License version 2 (the "GPL"),
 * available at http://www.broadcom.com/licenses/GPLv2.php, with the
 * following added to such license:
 * 
 *      As a special exception, the copyright holders of this software give you
 * permission to link this software with independent modules, and to copy and
 * distribute the resulting executable under terms of your choice, provided that
 * you also meet, for each linked independent module, the terms and conditions of
 * the license of that module.  An independent module is a module which is not
 * derived from this software.  The special exception does not apply to any
 * modifications of the software.
 * 
 *      Notwithstanding the above, under no circumstances may you combine this
 * software in any way with any other Broadcom software provided under a license
 * other than the GPL, without Broadcom's express prior written consent.
 *
 *
 * <<Broadcom-WL-IPTag/Open:>>
 *
 * $Id: bcmutils.h 563776 2015-06-15 15:51:15Z $
 */

#ifndef	_bcmutils_h_
#define	_bcmutils_h_


#ifdef __cplusplus
extern "C" {
#endif


#define bcm_strncpy_s(dst, noOfElements, src, count)    strncpy((dst), (src), (count))
#define bcm_strncat_s(dst, noOfElements, src, count)    strncat((dst), (src), (count))
#define bcm_snprintf_s snprintf
#define bcm_sprintf_s snprintf

/*
 * #define bcm_strcpy_s(dst, count, src)            strncpy((dst), (src), (count))
 * Use bcm_strcpy_s instead as it is a safer option
 * bcm_strcat_s: Use bcm_strncat_s as a safer option
 *
 */

/* ctype replacement */
#define _BCM_U	0x01	/* upper */
#define _BCM_L	0x02	/* lower */
#define _BCM_D	0x04	/* digit */
#define _BCM_C	0x08	/* cntrl */
#define _BCM_P	0x10	/* punct */
#define _BCM_S	0x20	/* white space (space/lf/tab) */
#define _BCM_X	0x40	/* hex digit */
#define _BCM_SP	0x80	/* hard space (0x20) */

extern const unsigned char bcm_ctype[];
#define bcm_ismask(x)	(bcm_ctype[(int)(unsigned char)(x)])

#define bcm_isalnum(c)	((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0)
#define bcm_isalpha(c)	((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0)
#define bcm_iscntrl(c)	((bcm_ismask(c)&(_BCM_C)) != 0)
#define bcm_isdigit(c)	((bcm_ismask(c)&(_BCM_D)) != 0)
#define bcm_isgraph(c)	((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0)
#define bcm_islower(c)	((bcm_ismask(c)&(_BCM_L)) != 0)
#define bcm_isprint(c)	((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0)
#define bcm_ispunct(c)	((bcm_ismask(c)&(_BCM_P)) != 0)
#define bcm_isspace(c)	((bcm_ismask(c)&(_BCM_S)) != 0)
#define bcm_isupper(c)	((bcm_ismask(c)&(_BCM_U)) != 0)
#define bcm_isxdigit(c)	((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0)
#define bcm_tolower(c)	(bcm_isupper((c)) ? ((c) + 'a' - 'A') : (c))
#define bcm_toupper(c)	(bcm_islower((c)) ? ((c) + 'A' - 'a') : (c))

#define CIRCULAR_ARRAY_FULL(rd_idx, wr_idx, max) ((wr_idx + 1)%max == rd_idx)

#define KB(bytes)	(((bytes) + 1023) / 1024)

/* Buffer structure for collecting string-formatted data
* using bcm_bprintf() API.
* Use bcm_binit() to initialize before use
*/

struct bcmstrbuf {
	char *buf;	/* pointer to current position in origbuf */
	unsigned int size;	/* current (residual) size in bytes */
	char *origbuf;	/* unmodified pointer to orignal buffer */
	unsigned int origsize;	/* unmodified orignal buffer size in bytes */
};

#define BCMSTRBUF_LEN(b)	(b->size)
#define BCMSTRBUF_BUF(b)	(b->buf)

/* ** driver-only section ** */
#ifdef BCMDRIVER
#include <osl.h>
#include <hnd_pktq.h>
#include <hnd_pktpool.h>

#define GPIO_PIN_NOTDEFINED 	0x20	/* Pin not defined */

/*
 * Spin at most 'us' microseconds while 'exp' is true.
 * Caller should explicitly test 'exp' when this completes
 * and take appropriate error action if 'exp' is still true.
 */
#ifndef SPINWAIT_POLL_PERIOD
#define SPINWAIT_POLL_PERIOD	10
#endif

#define SPINWAIT(exp, us) { \
	uint countdown = (us) + (SPINWAIT_POLL_PERIOD - 1); \
	while ((exp) && (countdown >= SPINWAIT_POLL_PERIOD)) { \
		OSL_DELAY(SPINWAIT_POLL_PERIOD); \
		countdown -= SPINWAIT_POLL_PERIOD; \
	} \
}

/* forward definition of ether_addr structure used by some function prototypes */

struct ether_addr;

extern int ether_isbcast(const void *ea);
extern int ether_isnulladdr(const void *ea);

#define BCM_MAC_RXCPL_IDX_BITS			12
#define BCM_MAX_RXCPL_IDX_INVALID		0
#define BCM_MAC_RXCPL_IFIDX_BITS		3
#define BCM_MAC_RXCPL_DOT11_BITS		1
#define BCM_MAX_RXCPL_IFIDX			((1 << BCM_MAC_RXCPL_IFIDX_BITS) - 1)
#define BCM_MAC_RXCPL_FLAG_BITS			4
#define BCM_RXCPL_FLAGS_IN_TRANSIT		0x1
#define BCM_RXCPL_FLAGS_FIRST_IN_FLUSHLIST	0x2
#define BCM_RXCPL_FLAGS_RXCPLVALID		0x4
#define BCM_RXCPL_FLAGS_RSVD			0x8

#define BCM_RXCPL_SET_IN_TRANSIT(a)	((a)->rxcpl_id.flags |= BCM_RXCPL_FLAGS_IN_TRANSIT)
#define BCM_RXCPL_CLR_IN_TRANSIT(a)	((a)->rxcpl_id.flags &= ~BCM_RXCPL_FLAGS_IN_TRANSIT)
#define BCM_RXCPL_IN_TRANSIT(a)		((a)->rxcpl_id.flags & BCM_RXCPL_FLAGS_IN_TRANSIT)

#define BCM_RXCPL_SET_FRST_IN_FLUSH(a)	((a)->rxcpl_id.flags |= BCM_RXCPL_FLAGS_FIRST_IN_FLUSHLIST)
#define BCM_RXCPL_CLR_FRST_IN_FLUSH(a)	((a)->rxcpl_id.flags &= ~BCM_RXCPL_FLAGS_FIRST_IN_FLUSHLIST)
#define BCM_RXCPL_FRST_IN_FLUSH(a)	((a)->rxcpl_id.flags & BCM_RXCPL_FLAGS_FIRST_IN_FLUSHLIST)

#define BCM_RXCPL_SET_VALID_INFO(a)	((a)->rxcpl_id.flags |= BCM_RXCPL_FLAGS_RXCPLVALID)
#define BCM_RXCPL_CLR_VALID_INFO(a)	((a)->rxcpl_id.flags &= ~BCM_RXCPL_FLAGS_RXCPLVALID)
#define BCM_RXCPL_VALID_INFO(a) (((a)->rxcpl_id.flags & BCM_RXCPL_FLAGS_RXCPLVALID) ? TRUE : FALSE)

#define UP_TABLE_MAX	((IPV4_TOS_DSCP_MASK >> IPV4_TOS_DSCP_SHIFT) + 1)	/* 64 max */

struct reorder_rxcpl_id_list {
	uint16 head;
	uint16 tail;
	uint32 cnt;
};

typedef struct rxcpl_id {
	uint32		idx : BCM_MAC_RXCPL_IDX_BITS;
	uint32		next_idx : BCM_MAC_RXCPL_IDX_BITS;
	uint32		ifidx : BCM_MAC_RXCPL_IFIDX_BITS;
	uint32		dot11 : BCM_MAC_RXCPL_DOT11_BITS;
	uint32		flags : BCM_MAC_RXCPL_FLAG_BITS;
} rxcpl_idx_id_t;

typedef struct rxcpl_data_len {
	uint32		metadata_len_w : 6;
	uint32		dataoffset: 10;
	uint32		datalen : 16;
} rxcpl_data_len_t;

typedef struct rxcpl_info {
	rxcpl_idx_id_t		rxcpl_id;
	uint32		host_pktref;
	union {
		rxcpl_data_len_t	rxcpl_len;
		struct rxcpl_info	*free_next;
	};
} rxcpl_info_t;

/* rx completion list */
typedef struct bcm_rxcplid_list {
	uint32			max;
	uint32			avail;
	rxcpl_info_t		*rxcpl_ptr;
	rxcpl_info_t		*free_list;
} bcm_rxcplid_list_t;

extern bool bcm_alloc_rxcplid_list(osl_t *osh, uint32 max);
extern rxcpl_info_t * bcm_alloc_rxcplinfo(void);
extern void bcm_free_rxcplinfo(rxcpl_info_t *ptr);
extern void bcm_chain_rxcplid(uint16 first,  uint16 next);
extern rxcpl_info_t *bcm_id2rxcplinfo(uint16 id);
extern uint16 bcm_rxcplinfo2id(rxcpl_info_t *ptr);
extern rxcpl_info_t *bcm_rxcpllist_end(rxcpl_info_t *ptr, uint32 *count);

/* externs */
/* packet */
extern uint pktcopy(osl_t *osh, void *p, uint offset, int len, uchar *buf);
extern uint pktfrombuf(osl_t *osh, void *p, uint offset, int len, uchar *buf);
extern uint pkttotlen(osl_t *osh, void *p);
extern void *pktlast(osl_t *osh, void *p);
extern uint pktsegcnt(osl_t *osh, void *p);
extern uint pktsegcnt_war(osl_t *osh, void *p);
extern uint8 *pktdataoffset(osl_t *osh, void *p,  uint offset);
extern void *pktoffset(osl_t *osh, void *p,  uint offset);
/* Add to adjust 802.1x priority */
extern void pktset8021xprio(void *pkt, int prio);

/* Get priority from a packet and pass it back in scb (or equiv) */
#define	PKTPRIO_VDSCP	0x100		/* DSCP prio found after VLAN tag */
#define	PKTPRIO_VLAN	0x200		/* VLAN prio found */
#define	PKTPRIO_UPD	0x400		/* DSCP used to update VLAN prio */
#define	PKTPRIO_DSCP	0x800		/* DSCP prio found */

/* DSCP type definitions (RFC4594) */
/* AF1x: High-Throughput Data (RFC2597) */
#define DSCP_AF11	0x0A
#define DSCP_AF12	0x0C
#define DSCP_AF13	0x0E
/* AF2x: Low-Latency Data (RFC2597) */
#define DSCP_AF21	0x12
#define DSCP_AF22	0x14
#define DSCP_AF23	0x16
/* AF3x: Multimedia Streaming (RFC2597) */
#define DSCP_AF31	0x1A
#define DSCP_AF32	0x1C
#define DSCP_AF33	0x1E
/* EF: Telephony (RFC3246) */
#define DSCP_EF		0x2E

extern uint pktsetprio(void *pkt, bool update_vtag);
extern uint pktsetprio_qms(void *pkt, uint8* up_table, bool update_vtag);
extern bool pktgetdscp(uint8 *pktdata, uint pktlen, uint8 *dscp);

/* string */
extern int bcm_atoi(const char *s);
extern ulong bcm_strtoul(const char *cp, char **endp, uint base);
extern char *bcmstrstr(const char *haystack, const char *needle);
extern char *bcmstrnstr(const char *s, uint s_len, const char *substr, uint substr_len);
extern char *bcmstrcat(char *dest, const char *src);
extern char *bcmstrncat(char *dest, const char *src, uint size);
extern ulong wchar2ascii(char *abuf, ushort *wbuf, ushort wbuflen, ulong abuflen);
char* bcmstrtok(char **string, const char *delimiters, char *tokdelim);
int bcmstricmp(const char *s1, const char *s2);
int bcmstrnicmp(const char* s1, const char* s2, int cnt);


/* ethernet address */
extern char *bcm_ether_ntoa(const struct ether_addr *ea, char *buf);
extern int bcm_ether_atoe(const char *p, struct ether_addr *ea);

/* ip address */
struct ipv4_addr;
extern char *bcm_ip_ntoa(struct ipv4_addr *ia, char *buf);
extern char *bcm_ipv6_ntoa(void *ipv6, char *buf);
extern int bcm_atoipv4(const char *p, struct ipv4_addr *ip);

/* delay */
extern void bcm_mdelay(uint ms);
/* variable access */
#define NVRAM_RECLAIM_CHECK(name)

extern char *getvar(char *vars, const char *name);
extern int getintvar(char *vars, const char *name);
extern int getintvararray(char *vars, const char *name, int index);
extern int getintvararraysize(char *vars, const char *name);
extern uint getgpiopin(char *vars, char *pin_name, uint def_pin);
#define bcm_perf_enable()
#define bcmstats(fmt)
#define	bcmlog(fmt, a1, a2)
#define	bcmdumplog(buf, size)	*buf = '\0'
#define	bcmdumplogent(buf, idx)	-1

#define TSF_TICKS_PER_MS	1000
#define TS_ENTER		0xdeadbeef	/* Timestamp profiling enter */
#define TS_EXIT			0xbeefcafe	/* Timestamp profiling exit */

#define bcmtslog(tstamp, fmt, a1, a2)
#define bcmprinttslogs()
#define bcmprinttstamp(us)
#define bcmdumptslog(b)

extern char *bcm_nvram_vars(uint *length);
extern int bcm_nvram_cache(void *sih);

/* Support for sharing code across in-driver iovar implementations.
 * The intent is that a driver use this structure to map iovar names
 * to its (private) iovar identifiers, and the lookup function to
 * find the entry.  Macros are provided to map ids and get/set actions
 * into a single number space for a switch statement.
 */

/* iovar structure */
typedef struct bcm_iovar {
	const char *name;	/* name for lookup and display */
	uint16 varid;		/* id for switch */
	uint16 flags;		/* driver-specific flag bits */
	uint16 type;		/* base type of argument */
	uint16 minlen;		/* min length for buffer vars */
} bcm_iovar_t;

/* varid definitions are per-driver, may use these get/set bits */

/* IOVar action bits for id mapping */
#define IOV_GET 0 /* Get an iovar */
#define IOV_SET 1 /* Set an iovar */

/* Varid to actionid mapping */
#define IOV_GVAL(id)		((id) * 2)
#define IOV_SVAL(id)		((id) * 2 + IOV_SET)
#define IOV_ISSET(actionid)	((actionid & IOV_SET) == IOV_SET)
#define IOV_ID(actionid)	(actionid >> 1)

/* flags are per-driver based on driver attributes */

extern const bcm_iovar_t *bcm_iovar_lookup(const bcm_iovar_t *table, const char *name);
extern int bcm_iovar_lencheck(const bcm_iovar_t *table, void *arg, int len, bool set);
#if defined(WLTINYDUMP) || defined(WLMSG_INFORM) || defined(WLMSG_ASSOC) || \
	defined(WLMSG_PRPKT) || defined(WLMSG_WSEC)
extern int bcm_format_ssid(char* buf, const uchar ssid[], uint ssid_len);
#endif 
#endif	/* BCMDRIVER */

/* Base type definitions */
#define IOVT_VOID	0	/* no value (implictly set only) */
#define IOVT_BOOL	1	/* any value ok (zero/nonzero) */
#define IOVT_INT8	2	/* integer values are range-checked */
#define IOVT_UINT8	3	/* unsigned int 8 bits */
#define IOVT_INT16	4	/* int 16 bits */
#define IOVT_UINT16	5	/* unsigned int 16 bits */
#define IOVT_INT32	6	/* int 32 bits */
#define IOVT_UINT32	7	/* unsigned int 32 bits */
#define IOVT_BUFFER	8	/* buffer is size-checked as per minlen */
#define BCM_IOVT_VALID(type) (((unsigned int)(type)) <= IOVT_BUFFER)

/* Initializer for IOV type strings */
#define BCM_IOV_TYPE_INIT { \
	"void", \
	"bool", \
	"int8", \
	"uint8", \
	"int16", \
	"uint16", \
	"int32", \
	"uint32", \
	"buffer", \
	"" }

#define BCM_IOVT_IS_INT(type) (\
	(type == IOVT_BOOL) || \
	(type == IOVT_INT8) || \
	(type == IOVT_UINT8) || \
	(type == IOVT_INT16) || \
	(type == IOVT_UINT16) || \
	(type == IOVT_INT32) || \
	(type == IOVT_UINT32))

/* ** driver/apps-shared section ** */

#define BCME_STRLEN 		64	/* Max string length for BCM errors */
#define VALID_BCMERROR(e)  ((e <= 0) && (e >= BCME_LAST))


/*
 * error codes could be added but the defined ones shouldn't be changed/deleted
 * these error codes are exposed to the user code
 * when ever a new error code is added to this list
 * please update errorstring table with the related error string and
 * update osl files with os specific errorcode map
*/

#define BCME_OK				0	/* Success */
#define BCME_ERROR			-1	/* Error generic */
#define BCME_BADARG			-2	/* Bad Argument */
#define BCME_BADOPTION			-3	/* Bad option */
#define BCME_NOTUP			-4	/* Not up */
#define BCME_NOTDOWN			-5	/* Not down */
#define BCME_NOTAP			-6	/* Not AP */
#define BCME_NOTSTA			-7	/* Not STA  */
#define BCME_BADKEYIDX			-8	/* BAD Key Index */
#define BCME_RADIOOFF 			-9	/* Radio Off */
#define BCME_NOTBANDLOCKED		-10	/* Not  band locked */
#define BCME_NOCLK			-11	/* No Clock */
#define BCME_BADRATESET			-12	/* BAD Rate valueset */
#define BCME_BADBAND			-13	/* BAD Band */
#define BCME_BUFTOOSHORT		-14	/* Buffer too short */
#define BCME_BUFTOOLONG			-15	/* Buffer too long */
#define BCME_BUSY			-16	/* Busy */
#define BCME_NOTASSOCIATED		-17	/* Not Associated */
#define BCME_BADSSIDLEN			-18	/* Bad SSID len */
#define BCME_OUTOFRANGECHAN		-19	/* Out of Range Channel */
#define BCME_BADCHAN			-20	/* Bad Channel */
#define BCME_BADADDR			-21	/* Bad Address */
#define BCME_NORESOURCE			-22	/* Not Enough Resources */
#define BCME_UNSUPPORTED		-23	/* Unsupported */
#define BCME_BADLEN			-24	/* Bad length */
#define BCME_NOTREADY			-25	/* Not Ready */
#define BCME_EPERM			-26	/* Not Permitted */
#define BCME_NOMEM			-27	/* No Memory */
#define BCME_ASSOCIATED			-28	/* Associated */
#define BCME_RANGE			-29	/* Not In Range */
#define BCME_NOTFOUND			-30	/* Not Found */
#define BCME_WME_NOT_ENABLED		-31	/* WME Not Enabled */
#define BCME_TSPEC_NOTFOUND		-32	/* TSPEC Not Found */
#define BCME_ACM_NOTSUPPORTED		-33	/* ACM Not Supported */
#define BCME_NOT_WME_ASSOCIATION	-34	/* Not WME Association */
#define BCME_SDIO_ERROR			-35	/* SDIO Bus Error */
#define BCME_DONGLE_DOWN		-36	/* Dongle Not Accessible */
#define BCME_VERSION			-37 	/* Incorrect version */
#define BCME_TXFAIL			-38 	/* TX failure */
#define BCME_RXFAIL			-39	/* RX failure */
#define BCME_NODEVICE			-40 	/* Device not present */
#define BCME_NMODE_DISABLED		-41 	/* NMODE disabled */
#define BCME_NONRESIDENT		-42 /* access to nonresident overlay */
#define BCME_SCANREJECT			-43 	/* reject scan request */
#define BCME_USAGE_ERROR                -44     /* WLCMD usage error */
#define BCME_IOCTL_ERROR                -45     /* WLCMD ioctl error */
#define BCME_SERIAL_PORT_ERR            -46     /* RWL serial port error */
#define BCME_DISABLED			-47     /* Disabled in this build */
#define BCME_DECERR				-48		/* Decrypt error */
#define BCME_ENCERR				-49		/* Encrypt error */
#define BCME_MICERR				-50		/* Integrity/MIC error */
#define BCME_REPLAY				-51		/* Replay */
#define BCME_IE_NOTFOUND		-52		/* IE not found */
#define BCME_DATA_NOTFOUND		-53		/* Complete data not found in buffer */
#define BCME_LAST			BCME_DATA_NOTFOUND

#define BCME_NOTENABLED BCME_DISABLED

/* These are collection of BCME Error strings */
#define BCMERRSTRINGTABLE {		\
	"OK",				\
	"Undefined error",		\
	"Bad Argument",			\
	"Bad Option",			\
	"Not up",			\
	"Not down",			\
	"Not AP",			\
	"Not STA",			\
	"Bad Key Index",		\
	"Radio Off",			\
	"Not band locked",		\
	"No clock",			\
	"Bad Rate valueset",		\
	"Bad Band",			\
	"Buffer too short",		\
	"Buffer too long",		\
	"Busy",				\
	"Not Associated",		\
	"Bad SSID len",			\
	"Out of Range Channel",		\
	"Bad Channel",			\
	"Bad Address",			\
	"Not Enough Resources",		\
	"Unsupported",			\
	"Bad length",			\
	"Not Ready",			\
	"Not Permitted",		\
	"No Memory",			\
	"Associated",			\
	"Not In Range",			\
	"Not Found",			\
	"WME Not Enabled",		\
	"TSPEC Not Found",		\
	"ACM Not Supported",		\
	"Not WME Association",		\
	"SDIO Bus Error",		\
	"Dongle Not Accessible",	\
	"Incorrect version",		\
	"TX Failure",			\
	"RX Failure",			\
	"Device Not Present",		\
	"NMODE Disabled",		\
	"Nonresident overlay access", \
	"Scan Rejected",		\
	"WLCMD usage error",		\
	"WLCMD ioctl error",		\
	"RWL serial port error", 	\
	"Disabled",			\
	"Decrypt error", \
	"Encrypt error", \
	"MIC error", \
	"Replay", \
	"IE not found", \
	"Data not found", \
}

#ifndef ABS
#define	ABS(a)			(((a) < 0) ? -(a) : (a))
#endif /* ABS */

#ifndef MIN
#define	MIN(a, b)		(((a) < (b)) ? (a) : (b))
#endif /* MIN */

#ifndef MAX
#define	MAX(a, b)		(((a) > (b)) ? (a) : (b))
#endif /* MAX */

/* limit to [min, max] */
#ifndef LIMIT_TO_RANGE
#define LIMIT_TO_RANGE(x, min, max) \
	((x) < (min) ? (min) : ((x) > (max) ? (max) : (x)))
#endif /* LIMIT_TO_RANGE */

/* limit to  max */
#ifndef LIMIT_TO_MAX
#define LIMIT_TO_MAX(x, max) \
	(((x) > (max) ? (max) : (x)))
#endif /* LIMIT_TO_MAX */

/* limit to min */
#ifndef LIMIT_TO_MIN
#define LIMIT_TO_MIN(x, min) \
	(((x) < (min) ? (min) : (x)))
#endif /* LIMIT_TO_MIN */

#define DELTA(curr, prev) ((curr) > (prev) ? ((curr) - (prev)) : \
	(0xffffffff - (prev) + (curr) + 1))
#define CEIL(x, y)		(((x) + ((y) - 1)) / (y))
#define ROUNDUP(x, y)		((((x) + ((y) - 1)) / (y)) * (y))
#define ROUNDDN(p, align)	((p) & ~((align) - 1))
#define	ISALIGNED(a, x)		(((uintptr)(a) & ((x) - 1)) == 0)
#define ALIGN_ADDR(addr, boundary) (void *)(((uintptr)(addr) + (boundary) - 1) \
	                                         & ~((boundary) - 1))
#define ALIGN_SIZE(size, boundary) (((size) + (boundary) - 1) \
	                                         & ~((boundary) - 1))
#define	ISPOWEROF2(x)		((((x) - 1) & (x)) == 0)
#define VALID_MASK(mask)	!((mask) & ((mask) + 1))

#ifndef OFFSETOF
#ifdef __ARMCC_VERSION
/*
 * The ARM RVCT compiler complains when using OFFSETOF where a constant
 * expression is expected, such as an initializer for a static object.
 * offsetof from the runtime library doesn't have that problem.
 */
#include <stddef.h>
#define	OFFSETOF(type, member)	offsetof(type, member)
#else
#  if ((__GNUC__ >= 4) && (__GNUC_MINOR__ >= 8))
/* GCC 4.8+ complains when using our OFFSETOF macro in array length declarations. */
#    define	OFFSETOF(type, member)	__builtin_offsetof(type, member)
#  else
#    define	OFFSETOF(type, member)	((uint)(uintptr)&((type *)0)->member)
#  endif /* GCC 4.8 or newer */
#endif /* __ARMCC_VERSION */
#endif /* OFFSETOF */

#ifndef ARRAYSIZE
#define ARRAYSIZE(a)		(sizeof(a) / sizeof(a[0]))
#endif

#ifndef ARRAYLAST /* returns pointer to last array element */
#define ARRAYLAST(a)		(&a[ARRAYSIZE(a)-1])
#endif

/* Reference a function; used to prevent a static function from being optimized out */
extern void *_bcmutils_dummy_fn;
#define REFERENCE_FUNCTION(f)	(_bcmutils_dummy_fn = (void *)(f))

/* bit map related macros */
#ifndef setbit
#ifndef NBBY		/* the BSD family defines NBBY */
#define	NBBY	8	/* 8 bits per byte */
#endif /* #ifndef NBBY */
#ifdef BCMUTILS_BIT_MACROS_USE_FUNCS
extern void setbit(void *array, uint bit);
extern void clrbit(void *array, uint bit);
extern bool isset(const void *array, uint bit);
extern bool isclr(const void *array, uint bit);
#else
#define	setbit(a, i)	(((uint8 *)a)[(i) / NBBY] |= 1 << ((i) % NBBY))
#define	clrbit(a, i)	(((uint8 *)a)[(i) / NBBY] &= ~(1 << ((i) % NBBY)))
#define	isset(a, i)	(((const uint8 *)a)[(i) / NBBY] & (1 << ((i) % NBBY)))
#define	isclr(a, i)	((((const uint8 *)a)[(i) / NBBY] & (1 << ((i) % NBBY))) == 0)
#endif
#endif /* setbit */
extern void set_bitrange(void *array, uint start, uint end, uint maxbit);

#define	isbitset(a, i)	(((a) & (1 << (i))) != 0)

#define	NBITS(type)	(sizeof(type) * 8)
#define NBITVAL(nbits)	(1 << (nbits))
#define MAXBITVAL(nbits)	((1 << (nbits)) - 1)
#define	NBITMASK(nbits)	MAXBITVAL(nbits)
#define MAXNBVAL(nbyte)	MAXBITVAL((nbyte) * 8)

extern void bcm_bitprint32(const uint32 u32);

/*
 * ----------------------------------------------------------------------------
 * Multiword map of 2bits, nibbles
 * setbit2 setbit4 (void *ptr, uint32 ix, uint32 val)
 * getbit2 getbit4 (void *ptr, uint32 ix)
 * ----------------------------------------------------------------------------
 */

#define DECLARE_MAP_API(NB, RSH, LSH, OFF, MSK)                     \
static INLINE void setbit##NB(void *ptr, uint32 ix, uint32 val)     \
{                                                                   \
	uint32 *addr = (uint32 *)ptr;                                   \
	uint32 *a = addr + (ix >> RSH); /* (ix / 2^RSH) */              \
	uint32 pos = (ix & OFF) << LSH; /* (ix % 2^RSH) * 2^LSH */      \
	uint32 mask = (MSK << pos);                                     \
	uint32 tmp = *a & ~mask;                                        \
	*a = tmp | (val << pos);                                        \
}                                                                   \
static INLINE uint32 getbit##NB(void *ptr, uint32 ix)               \
{                                                                   \
	uint32 *addr = (uint32 *)ptr;                                   \
	uint32 *a = addr + (ix >> RSH);                                 \
	uint32 pos = (ix & OFF) << LSH;                                 \
	return ((*a >> pos) & MSK);                                     \
}

DECLARE_MAP_API(2, 4, 1, 15U, 0x0003) /* setbit2() and getbit2() */
DECLARE_MAP_API(4, 3, 2, 7U, 0x000F) /* setbit4() and getbit4() */
DECLARE_MAP_API(8, 2, 3, 3U, 0x00FF) /* setbit8() and getbit8() */

/* basic mux operation - can be optimized on several architectures */
#define MUX(pred, true, false) ((pred) ? (true) : (false))

/* modulo inc/dec - assumes x E [0, bound - 1] */
#define MODDEC(x, bound) MUX((x) == 0, (bound) - 1, (x) - 1)
#define MODINC(x, bound) MUX((x) == (bound) - 1, 0, (x) + 1)

/* modulo inc/dec, bound = 2^k */
#define MODDEC_POW2(x, bound) (((x) - 1) & ((bound) - 1))
#define MODINC_POW2(x, bound) (((x) + 1) & ((bound) - 1))

/* modulo add/sub - assumes x, y E [0, bound - 1] */
#define MODADD(x, y, bound) \
    MUX((x) + (y) >= (bound), (x) + (y) - (bound), (x) + (y))
#define MODSUB(x, y, bound) \
    MUX(((int)(x)) - ((int)(y)) < 0, (x) - (y) + (bound), (x) - (y))

/* module add/sub, bound = 2^k */
#define MODADD_POW2(x, y, bound) (((x) + (y)) & ((bound) - 1))
#define MODSUB_POW2(x, y, bound) (((x) - (y)) & ((bound) - 1))

/* crc defines */
#define CRC8_INIT_VALUE  0xff		/* Initial CRC8 checksum value */
#define CRC8_GOOD_VALUE  0x9f		/* Good final CRC8 checksum value */
#define CRC16_INIT_VALUE 0xffff		/* Initial CRC16 checksum value */
#define CRC16_GOOD_VALUE 0xf0b8		/* Good final CRC16 checksum value */
#define CRC32_INIT_VALUE 0xffffffff	/* Initial CRC32 checksum value */
#define CRC32_GOOD_VALUE 0xdebb20e3	/* Good final CRC32 checksum value */

/* use for direct output of MAC address in printf etc */
#define MACF				"%02x:%02x:%02x:%02x:%02x:%02x"
#define ETHERP_TO_MACF(ea)	((struct ether_addr *) (ea))->octet[0], \
							((struct ether_addr *) (ea))->octet[1], \
							((struct ether_addr *) (ea))->octet[2], \
							((struct ether_addr *) (ea))->octet[3], \
							((struct ether_addr *) (ea))->octet[4], \
							((struct ether_addr *) (ea))->octet[5]

#define ETHER_TO_MACF(ea) 	(ea).octet[0], \
							(ea).octet[1], \
							(ea).octet[2], \
							(ea).octet[3], \
							(ea).octet[4], \
							(ea).octet[5]
#if !defined(SIMPLE_MAC_PRINT)
#define MACDBG "%02x:%02x:%02x:%02x:%02x:%02x"
#define MAC2STRDBG(ea) (ea)[0], (ea)[1], (ea)[2], (ea)[3], (ea)[4], (ea)[5]
#else
#define MACDBG				"%02x:%02x:%02x"
#define MAC2STRDBG(ea) (ea)[0], (ea)[4], (ea)[5]
#endif /* SIMPLE_MAC_PRINT */

/* bcm_format_flags() bit description structure */
typedef struct bcm_bit_desc {
	uint32	bit;
	const char* name;
} bcm_bit_desc_t;

/* bcm_format_field */
typedef struct bcm_bit_desc_ex {
	uint32 mask;
	const bcm_bit_desc_t *bitfield;
} bcm_bit_desc_ex_t;

/* buffer length for ethernet address from bcm_ether_ntoa() */
#define ETHER_ADDR_STR_LEN	18	/* 18-bytes of Ethernet address buffer length */

static INLINE uint32 /* 32bit word aligned xor-32 */
bcm_compute_xor32(volatile uint32 *u32_val, int num_u32)
{
	int idx;
	uint32 xor32 = 0;
	for (idx = 0; idx < num_u32; idx++)
		xor32 ^= *(u32_val + idx);
	return xor32;
}

/* crypto utility function */
/* 128-bit xor: *dst = *src1 xor *src2. dst1, src1 and src2 may have any alignment */
static INLINE void
xor_128bit_block(const uint8 *src1, const uint8 *src2, uint8 *dst)
{
	if (
#ifdef __i386__
	    1 ||
#endif
	    (((uintptr)src1 | (uintptr)src2 | (uintptr)dst) & 3) == 0) {
		/* ARM CM3 rel time: 1229 (727 if alignment check could be omitted) */
		/* x86 supports unaligned.  This version runs 6x-9x faster on x86. */
		((uint32 *)dst)[0] = ((const uint32 *)src1)[0] ^ ((const uint32 *)src2)[0];
		((uint32 *)dst)[1] = ((const uint32 *)src1)[1] ^ ((const uint32 *)src2)[1];
		((uint32 *)dst)[2] = ((const uint32 *)src1)[2] ^ ((const uint32 *)src2)[2];
		((uint32 *)dst)[3] = ((const uint32 *)src1)[3] ^ ((const uint32 *)src2)[3];
	} else {
		/* ARM CM3 rel time: 4668 (4191 if alignment check could be omitted) */
		int k;
		for (k = 0; k < 16; k++)
			dst[k] = src1[k] ^ src2[k];
	}
}

/* externs */
/* crc */
extern uint8 hndcrc8(uint8 *p, uint nbytes, uint8 crc);
extern uint16 hndcrc16(uint8 *p, uint nbytes, uint16 crc);
extern uint32 hndcrc32(uint8 *p, uint nbytes, uint32 crc);

/* format/print */
#if defined(DHD_DEBUG) || defined(WLMSG_PRHDRS) || defined(WLMSG_PRPKT) || \
	defined(WLMSG_ASSOC)
/* print out the value a field has: fields may have 1-32 bits and may hold any value */
extern int bcm_format_field(const bcm_bit_desc_ex_t *bd, uint32 field, char* buf, int len);
/* print out which bits in flags are set */
extern int bcm_format_flags(const bcm_bit_desc_t *bd, uint32 flags, char* buf, int len);
#endif

extern int bcm_format_hex(char *str, const void *bytes, int len);

extern const char *bcm_crypto_algo_name(uint algo);
extern char *bcm_chipname(uint chipid, char *buf, uint len);
extern char *bcm_brev_str(uint32 brev, char *buf);
extern void printbig(char *buf);
extern void prhex(const char *msg, uchar *buf, uint len);

/* IE parsing */

/* packing is required if struct is passed across the bus */
#include <packed_section_start.h>
/* tag_ID/length/value_buffer tuple */
typedef struct bcm_tlv {
	uint8	id;
	uint8	len;
	uint8	data[1];
} bcm_tlv_t;

/* bcm tlv w/ 16 bit id/len */
typedef BWL_PRE_PACKED_STRUCT struct bcm_xtlv {
	uint16	id;
	uint16	len;
	uint8	data[1];
} BWL_POST_PACKED_STRUCT bcm_xtlv_t;
#include <packed_section_end.h>


/* descriptor of xtlv data src or dst  */
typedef struct {
	uint16	type;
	uint16	len;
	void	*ptr; /* ptr to memory location */
} xtlv_desc_t;

/* xtlv options */
#define BCM_XTLV_OPTION_NONE	0x0000
#define BCM_XTLV_OPTION_ALIGN32	0x0001

typedef uint16 bcm_xtlv_opts_t;
struct bcm_xtlvbuf {
	bcm_xtlv_opts_t opts;
	uint16 size;
	uint8 *head; /* point to head of buffer */
	uint8 *buf; /* current position of buffer */
	/* allocated buffer may follow, but not necessarily */
};
typedef struct bcm_xtlvbuf bcm_xtlvbuf_t;

#define BCM_TLV_MAX_DATA_SIZE (255)
#define BCM_XTLV_MAX_DATA_SIZE (65535)
#define BCM_TLV_HDR_SIZE (OFFSETOF(bcm_tlv_t, data))

#define BCM_XTLV_HDR_SIZE (OFFSETOF(bcm_xtlv_t, data))
/* LEN only stores the value's length without padding */
#define BCM_XTLV_LEN(elt) ltoh16_ua(&(elt->len))
#define BCM_XTLV_ID(elt) ltoh16_ua(&(elt->id))
/* entire size of the XTLV including header, data, and optional padding */
#define BCM_XTLV_SIZE(elt, opts) bcm_xtlv_size(elt, opts)
#define bcm_valid_xtlv(elt, buflen, opts) (elt && ((int)(buflen) >= (int)BCM_XTLV_SIZE(elt, opts)))

/* Check that bcm_tlv_t fits into the given buflen */
#define bcm_valid_tlv(elt, buflen) (\
	 ((int)(buflen) >= (int)BCM_TLV_HDR_SIZE) && \
	 ((int)(buflen) >= (int)(BCM_TLV_HDR_SIZE + (elt)->len)))


extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen);
extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key);
extern bcm_tlv_t *bcm_parse_tlvs_min_bodylen(void *buf, int buflen, uint key, int min_bodylen);

extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key);

extern bcm_tlv_t *bcm_find_vendor_ie(void *tlvs, int tlvs_len, const char *voui, uint8 *type,
	int type_len);

extern uint8 *bcm_write_tlv(int type, const void *data, int datalen, uint8 *dst);
extern uint8 *bcm_write_tlv_safe(int type, const void *data, int datalen, uint8 *dst,
	int dst_maxlen);

extern uint8 *bcm_copy_tlv(const void *src, uint8 *dst);
extern uint8 *bcm_copy_tlv_safe(const void *src, uint8 *dst, int dst_maxlen);

/* xtlv */

/* return the next xtlv element, and update buffer len (remaining). Buffer length
 * updated includes padding as specified by options
 */
extern bcm_xtlv_t *bcm_next_xtlv(bcm_xtlv_t *elt, int *buflen, bcm_xtlv_opts_t opts);

/* initialize an xtlv buffer. Use options specified for packing/unpacking using
 * the buffer. Caller is responsible for allocating both buffers.
 */
extern int bcm_xtlv_buf_init(bcm_xtlvbuf_t *tlv_buf, uint8 *buf, uint16 len,
	bcm_xtlv_opts_t opts);

extern uint16 bcm_xtlv_buf_len(struct bcm_xtlvbuf *tbuf);
extern uint16 bcm_xtlv_buf_rlen(struct bcm_xtlvbuf *tbuf);
extern uint8 *bcm_xtlv_buf(struct bcm_xtlvbuf *tbuf);
extern uint8 *bcm_xtlv_head(struct bcm_xtlvbuf *tbuf);
extern int bcm_xtlv_put_data(bcm_xtlvbuf_t *tbuf, uint16 type, const void *data, uint16 dlen);
extern int bcm_xtlv_put_8(bcm_xtlvbuf_t *tbuf, uint16 type, const int8 data);
extern int bcm_xtlv_put_16(bcm_xtlvbuf_t *tbuf, uint16 type, const int16 data);
extern int bcm_xtlv_put_32(bcm_xtlvbuf_t *tbuf, uint16 type, const int32 data);
extern int bcm_unpack_xtlv_entry(uint8 **buf, uint16 xpct_type, uint16 xpct_len,
	void *dst, bcm_xtlv_opts_t opts);
extern int bcm_pack_xtlv_entry(uint8 **buf, uint16 *buflen, uint16 type, uint16 len,
	void *src, bcm_xtlv_opts_t opts);
extern int bcm_xtlv_size(const bcm_xtlv_t *elt, bcm_xtlv_opts_t opts);

/* callback for unpacking xtlv from a buffer into context. */
typedef int (bcm_xtlv_unpack_cbfn_t)(void *ctx, uint8 *buf, uint16 type, uint16 len);

/* unpack a tlv buffer using buffer, options, and callback */
extern int bcm_unpack_xtlv_buf(void *ctx, uint8 *buf, uint16 buflen,
	bcm_xtlv_opts_t opts, bcm_xtlv_unpack_cbfn_t *cbfn);

/* unpack a set of tlvs from the buffer using provided xtlv desc */
extern int bcm_unpack_xtlv_buf_to_mem(void *buf, int *buflen, xtlv_desc_t *items,
	bcm_xtlv_opts_t opts);

/* pack a set of tlvs into buffer using provided xtlv desc */
extern int bcm_pack_xtlv_buf_from_mem(void **buf, uint16 *buflen, xtlv_desc_t *items,
	bcm_xtlv_opts_t opts);

/* return data pointer of a given ID from xtlv buffer
 * xtlv data length is given to *datalen_out, if the pointer is valid
 */
extern void *bcm_get_data_from_xtlv_buf(uint8 *tlv_buf, uint16 buflen, uint16 id,
	uint16 *datalen_out, bcm_xtlv_opts_t opts);

/* callback to return next tlv id and len to pack, if there is more tlvs to come and
 * options e.g. alignment
 */
typedef bool (*bcm_pack_xtlv_next_info_cbfn_t)(void *ctx, uint16 *tlv_id, uint16 *tlv_len);

/* callback to pack the tlv into length validated buffer */
typedef void (*bcm_pack_xtlv_pack_next_cbfn_t)(void *ctx,
	uint16 tlv_id, uint16 tlv_len, uint8* buf);

/* pack a set of tlvs into buffer using get_next to interate */
int bcm_pack_xtlv_buf(void *ctx, void *tlv_buf, uint16 buflen,
	bcm_xtlv_opts_t opts, bcm_pack_xtlv_next_info_cbfn_t get_next,
	bcm_pack_xtlv_pack_next_cbfn_t pack_next, int *outlen);

/* bcmerror */
extern const char *bcmerrorstr(int bcmerror);

/* multi-bool data type: set of bools, mbool is true if any is set */
typedef uint32 mbool;
#define mboolset(mb, bit)		((mb) |= (bit))		/* set one bool */
#define mboolclr(mb, bit)		((mb) &= ~(bit))	/* clear one bool */
#define mboolisset(mb, bit)		(((mb) & (bit)) != 0)	/* TRUE if one bool is set */
#define	mboolmaskset(mb, mask, val)	((mb) = (((mb) & ~(mask)) | (val)))

/* generic datastruct to help dump routines */
struct fielddesc {
	const char *nameandfmt;
	uint32 offset;
	uint32 len;
};

extern void bcm_binit(struct bcmstrbuf *b, char *buf, uint size);
extern void bcm_bprhex(struct bcmstrbuf *b, const char *msg, bool newline,
	const uint8 *buf, int len);

extern void bcm_inc_bytes(uchar *num, int num_bytes, uint8 amount);
extern int bcm_cmp_bytes(const uchar *arg1, const uchar *arg2, uint8 nbytes);
extern void bcm_print_bytes(const char *name, const uchar *cdata, int len);

typedef  uint32 (*bcmutl_rdreg_rtn)(void *arg0, uint arg1, uint32 offset);
extern uint bcmdumpfields(bcmutl_rdreg_rtn func_ptr, void *arg0, uint arg1, struct fielddesc *str,
                          char *buf, uint32 bufsize);
extern uint bcm_bitcount(uint8 *bitmap, uint bytelength);

extern int bcm_bprintf(struct bcmstrbuf *b, const char *fmt, ...);

/* power conversion */
extern uint16 bcm_qdbm_to_mw(uint8 qdbm);
extern uint8 bcm_mw_to_qdbm(uint16 mw);
extern uint bcm_mkiovar(const char *name, char *data, uint datalen, char *buf, uint len);

unsigned int process_nvram_vars(char *varbuf, unsigned int len);

/* trace any object allocation / free, with / without features (flags) set to the object */

#define BCM_OBJDBG_ADD           1
#define BCM_OBJDBG_REMOVE        2
#define BCM_OBJDBG_ADD_PKT       3

/* object feature: set or clear flags */
#define BCM_OBJECT_FEATURE_FLAG       1
#define BCM_OBJECT_FEATURE_PKT_STATE  2
/* object feature: flag bits */
#define BCM_OBJECT_FEATURE_0     (1 << 0)
#define BCM_OBJECT_FEATURE_1     (1 << 1)
#define BCM_OBJECT_FEATURE_2     (1 << 2)
/* object feature: clear flag bits field set with this flag */
#define BCM_OBJECT_FEATURE_CLEAR (1 << 31)
#ifdef BCM_OBJECT_TRACE
#define bcm_pkt_validate_chk(obj)	do { \
	void * pkttag; \
	bcm_object_trace_chk(obj, 0, 0, \
		__FUNCTION__, __LINE__); \
	if ((pkttag = PKTTAG(obj))) { \
		bcm_object_trace_chk(obj, 1, DHD_PKTTAG_SN(pkttag), \
			__FUNCTION__, __LINE__); \
	} \
} while (0)
extern void bcm_object_trace_opr(void *obj, uint32 opt, const char *caller, int line);
extern void bcm_object_trace_upd(void *obj, void *obj_new);
extern void bcm_object_trace_chk(void *obj, uint32 chksn, uint32 sn,
	const char *caller, int line);
extern void bcm_object_feature_set(void *obj, uint32 type, uint32 value);
extern int  bcm_object_feature_get(void *obj, uint32 type, uint32 value);
extern void bcm_object_trace_init(void);
extern void bcm_object_trace_deinit(void);
#else
#define bcm_pkt_validate_chk(obj)
#define bcm_object_trace_opr(a, b, c, d)
#define bcm_object_trace_upd(a, b)
#define bcm_object_trace_chk(a, b, c, d, e)
#define bcm_object_feature_set(a, b, c)
#define bcm_object_feature_get(a, b, c)
#define bcm_object_trace_init()
#define bcm_object_trace_deinit()
#endif /* BCM_OBJECT_TRACE */

/* calculate a * b + c */
extern void bcm_uint64_multiple_add(uint32* r_high, uint32* r_low, uint32 a, uint32 b, uint32 c);
/* calculate a / b */
extern void bcm_uint64_divide(uint32* r, uint32 a_high, uint32 a_low, uint32 b);


/* Public domain bit twiddling hacks/utilities: Sean Eron Anderson */

/* Table driven count set bits. */
static const uint8 /* Table only for use by bcm_cntsetbits */
_CSBTBL[256] =
{
#	define B2(n)    n,     n + 1,     n + 1,     n + 2
#	define B4(n) B2(n), B2(n + 1), B2(n + 1), B2(n + 2)
#	define B6(n) B4(n), B4(n + 1), B4(n + 1), B4(n + 2)
	B6(0), B6(0 + 1), B6(0 + 1), B6(0 + 2)
};

static INLINE uint32 /* Uses table _CSBTBL for fast counting of 1's in a u32 */
bcm_cntsetbits(const uint32 u32arg)
{
	/* function local scope declaration of const _CSBTBL[] */
	const uint8 * p = (const uint8 *)&u32arg;
	return (_CSBTBL[p[0]] + _CSBTBL[p[1]] + _CSBTBL[p[2]] + _CSBTBL[p[3]]);
}


static INLINE int /* C equivalent count of leading 0's in a u32 */
C_bcm_count_leading_zeros(uint32 u32arg)
{
	int shifts = 0;
	while (u32arg) {
		shifts++; u32arg >>= 1;
	}
	return (32U - shifts);
}

#ifdef BCMDRIVER
/*
 * Assembly instructions: Count Leading Zeros
 * "clz"	: MIPS, ARM
 * "cntlzw"	: PowerPC
 * "BSF"	: x86
 * "lzcnt"	: AMD, SPARC
 */

#if defined(__arm__)
#if defined(__ARM_ARCH_7M__) /* Cortex M3 */
#define __USE_ASM_CLZ__
#endif /* __ARM_ARCH_7M__ */
#if defined(__ARM_ARCH_7R__) /* Cortex R4 */
#define __USE_ASM_CLZ__
#endif /* __ARM_ARCH_7R__ */
#endif /* __arm__ */

static INLINE int
bcm_count_leading_zeros(uint32 u32arg)
{
#if defined(__USE_ASM_CLZ__)
	int zeros;
	__asm__ volatile("clz    %0, %1 \n" : "=r" (zeros) : "r"  (u32arg));
	return zeros;
#else	/* C equivalent */
	return C_bcm_count_leading_zeros(u32arg);
#endif  /* C equivalent */
}

/*
 * Macro to count leading zeroes
 *
 */
#if defined(__GNUC__)
#define CLZ(x) __builtin_clzl(x)
#elif defined(__arm__)
#define CLZ(x) __clz(x)
#else
#define CLZ(x) bcm_count_leading_zeros(x)
#endif /* __GNUC__ */

/* INTERFACE: Multiword bitmap based small id allocator. */
struct bcm_mwbmap;	/* forward declaration for use as an opaque mwbmap handle */

#define BCM_MWBMAP_INVALID_HDL	((struct bcm_mwbmap *)NULL)
#define BCM_MWBMAP_INVALID_IDX	((uint32)(~0U))

/* Incarnate a multiword bitmap based small index allocator */
extern struct bcm_mwbmap * bcm_mwbmap_init(osl_t * osh, uint32 items_max);

/* Free up the multiword bitmap index allocator */
extern void bcm_mwbmap_fini(osl_t * osh, struct bcm_mwbmap * mwbmap_hdl);

/* Allocate a unique small index using a multiword bitmap index allocator */
extern uint32 bcm_mwbmap_alloc(struct bcm_mwbmap * mwbmap_hdl);

/* Force an index at a specified position to be in use */
extern void bcm_mwbmap_force(struct bcm_mwbmap * mwbmap_hdl, uint32 bitix);

/* Free a previously allocated index back into the multiword bitmap allocator */
extern void bcm_mwbmap_free(struct bcm_mwbmap * mwbmap_hdl, uint32 bitix);

/* Fetch the toal number of free indices in the multiword bitmap allocator */
extern uint32 bcm_mwbmap_free_cnt(struct bcm_mwbmap * mwbmap_hdl);

/* Determine whether an index is inuse or free */
extern bool bcm_mwbmap_isfree(struct bcm_mwbmap * mwbmap_hdl, uint32 bitix);

/* Debug dump a multiword bitmap allocator */
extern void bcm_mwbmap_show(struct bcm_mwbmap * mwbmap_hdl);

extern void bcm_mwbmap_audit(struct bcm_mwbmap * mwbmap_hdl);
/* End - Multiword bitmap based small Id allocator. */


/* INTERFACE: Simple unique 16bit Id Allocator using a stack implementation. */

#define ID16_INVALID                ((uint16)(~0))
#define ID16_UNDEFINED              (ID16_INVALID)

/*
 * Construct a 16bit id allocator, managing 16bit ids in the range:
 *    [start_val16 .. start_val16+total_ids)
 * Note: start_val16 is inclusive.
 * Returns an opaque handle to the 16bit id allocator.
 */
extern void * id16_map_init(osl_t *osh, uint16 total_ids, uint16 start_val16);
extern void * id16_map_fini(osl_t *osh, void * id16_map_hndl);
extern void id16_map_clear(void * id16_map_hndl, uint16 total_ids, uint16 start_val16);

/* Allocate a unique 16bit id */
extern uint16 id16_map_alloc(void * id16_map_hndl);

/* Free a 16bit id value into the id16 allocator */
extern void id16_map_free(void * id16_map_hndl, uint16 val16);

/* Get the number of failures encountered during id allocation. */
extern uint32 id16_map_failures(void * id16_map_hndl);

/* Audit the 16bit id allocator state. */
extern bool id16_map_audit(void * id16_map_hndl);
/* End - Simple 16bit Id Allocator. */
#endif /* BCMDRIVER */

extern void bcm_uint64_right_shift(uint32* r, uint32 a_high, uint32 a_low, uint32 b);

void bcm_add_64(uint32* r_hi, uint32* r_lo, uint32 offset);
void bcm_sub_64(uint32* r_hi, uint32* r_lo, uint32 offset);

/* calculate checksum for ip header, tcp / udp header / data */
uint16 bcm_ip_cksum(uint8 *buf, uint32 len, uint32 sum);

#ifndef _dll_t_
#define _dll_t_
/*
 * -----------------------------------------------------------------------------
 *                      Double Linked List Macros
 * -----------------------------------------------------------------------------
 *
 * All dll operations must be performed on a pre-initialized node.
 * Inserting an uninitialized node into a list effectively initialized it.
 *
 * When a node is deleted from a list, you may initialize it to avoid corruption
 * incurred by double deletion. You may skip initialization if the node is
 * immediately inserted into another list.
 *
 * By placing a dll_t element at the start of a struct, you may cast a dll_t *
 * to the struct or vice versa.
 *
 * Example of declaring an initializing someList and inserting nodeA, nodeB
 *
 *     typedef struct item {
 *         dll_t node;
 *         int someData;
 *     } Item_t;
 *     Item_t nodeA, nodeB, nodeC;
 *     nodeA.someData = 11111, nodeB.someData = 22222, nodeC.someData = 33333;
 *
 *     dll_t someList;
 *     dll_init(&someList);
 *
 *     dll_append(&someList, (dll_t *) &nodeA);
 *     dll_prepend(&someList, &nodeB.node);
 *     dll_insert((dll_t *)&nodeC, &nodeA.node);
 *
 *     dll_delete((dll_t *) &nodeB);
 *
 * Example of a for loop to walk someList of node_p
 *
 *   extern void mydisplay(Item_t * item_p);
 *
 *   dll_t * item_p, * next_p;
 *   for (item_p = dll_head_p(&someList); ! dll_end(&someList, item_p);
 *        item_p = next_p)
 *   {
 *       next_p = dll_next_p(item_p);
 *       ... use item_p at will, including removing it from list ...
 *       mydisplay((PItem_t)item_p);
 *   }
 *
 * -----------------------------------------------------------------------------
 */
typedef struct dll {
	struct dll * next_p;
	struct dll * prev_p;
} dll_t;

static INLINE void
dll_init(dll_t *node_p)
{
	node_p->next_p = node_p;
	node_p->prev_p = node_p;
}
/* dll macros returing a pointer to dll_t */

static INLINE dll_t *
dll_head_p(dll_t *list_p)
{
	return list_p->next_p;
}


static INLINE dll_t *
dll_tail_p(dll_t *list_p)
{
	return (list_p)->prev_p;
}


static INLINE dll_t *
dll_next_p(dll_t *node_p)
{
	return (node_p)->next_p;
}


static INLINE dll_t *
dll_prev_p(dll_t *node_p)
{
	return (node_p)->prev_p;
}


static INLINE bool
dll_empty(dll_t *list_p)
{
	return ((list_p)->next_p == (list_p));
}


static INLINE bool
dll_end(dll_t *list_p, dll_t * node_p)
{
	return (list_p == node_p);
}


/* inserts the node new_p "after" the node at_p */
static INLINE void
dll_insert(dll_t *new_p, dll_t * at_p)
{
	new_p->next_p = at_p->next_p;
	new_p->prev_p = at_p;
	at_p->next_p = new_p;
	(new_p->next_p)->prev_p = new_p;
}

static INLINE void
dll_append(dll_t *list_p, dll_t *node_p)
{
	dll_insert(node_p, dll_tail_p(list_p));
}

static INLINE void
dll_prepend(dll_t *list_p, dll_t *node_p)
{
	dll_insert(node_p, list_p);
}


/* deletes a node from any list that it "may" be in, if at all. */
static INLINE void
dll_delete(dll_t *node_p)
{
	node_p->prev_p->next_p = node_p->next_p;
	node_p->next_p->prev_p = node_p->prev_p;
}
#endif  /* ! defined(_dll_t_) */

/* Elements managed in a double linked list */

typedef struct dll_pool {
	dll_t       free_list;
	uint16      free_count;
	uint16      elems_max;
	uint16      elem_size;
	dll_t       elements[1];
} dll_pool_t;

dll_pool_t * dll_pool_init(void * osh, uint16 elems_max, uint16 elem_size);
void * dll_pool_alloc(dll_pool_t * dll_pool_p);
void dll_pool_free(dll_pool_t * dll_pool_p, void * elem_p);
void dll_pool_free_tail(dll_pool_t * dll_pool_p, void * elem_p);
typedef void (* dll_elem_dump)(void * elem_p);
void dll_pool_detach(void * osh, dll_pool_t * pool, uint16 elems_max, uint16 elem_size);

#ifdef __cplusplus
	}
#endif

/* #define DEBUG_COUNTER */
#ifdef DEBUG_COUNTER
#define CNTR_TBL_MAX 10
typedef struct _counter_tbl_t {
	char name[16];				/* name of this counter table */
	uint32 prev_log_print;		/* Internal use. Timestamp of the previous log print */
	uint log_print_interval;	/* Desired interval to print logs in ms */
	uint needed_cnt;			/* How many counters need to be used */
	uint32 cnt[CNTR_TBL_MAX];		/* Counting entries to increase at desired places */
	bool enabled;				/* Whether to enable printing log */
} counter_tbl_t;


void counter_printlog(counter_tbl_t *ctr_tbl);
#endif /* DEBUG_COUNTER */

/* Given a number 'n' returns 'm' that is next larger power of 2 after n */
static INLINE uint32 next_larger_power2(uint32 num)
{
	num--;
	num |= (num >> 1);
	num |= (num >> 2);
	num |= (num >> 4);
	num |= (num >> 8);
	num |= (num >> 16);
	return (num + 1);
}

#endif	/* _bcmutils_h_ */