.\"
.\"  eeprom.8 - manpage for the i2c-tools/eeprom utility
.\"  Copyright (C) 2013  Jaromir Capik
.\"
.\"  This program is free software; you can redistribute it and/or modify
.\"  it under the terms of the GNU General Public License as published by
.\"  the Free Software Foundation; either version 2 of the License, or
.\"  (at your option) any later version.
.\"
.\"  This program is distributed in the hope that it will be useful,
.\"  but WITHOUT ANY WARRANTY; without even the implied warranty of
.\"  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
.\"  GNU General Public License for more details.
.\"
.\"  You should have received a copy of the GNU General Public License along
.\"  with this program; if not, write to the Free Software Foundation, Inc.,
.\"  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
.\"
.TH eepromer "8" "Jul 2013" "i2c-tools" "System Administration"
.SH NAME
eepromer \- reads and writes 24Cxx EEPROMs connected to I2C serial bus
.SH SYNOPSIS
.B eepromer
[-r|-w|-e|-p] -f <device> <i2c-addr>
.SH DESCRIPTION
The EEPROM must be a large EEPROM which uses a 2-byte address
field (24C32 or larger). It will NOT WORK on small EEPROMs
(24C01 - 24C16) such as those used on SDRAM DIMMs.
.SH NOTES
Don't forget to load your i2c chipset and the i2c-dev drivers.
.P
Tested only on 24C256.
.P
.SH PARAMETERS
.TP
.I Actions
.TP
.B \-r
Read
.TP
.B \-w
Write
.TP
.B \-e
Erase
.TP
.B \-p
Print header
.TP
.I Bus
.TP
.B \-f device
Device file representing the I2C bus (eg. /dev/i2c-0)
.TP
.B i2c-addr
I2C bus address of the EEPROM (eg. 0x3A)
.SH SEE ALSO
.BR eeprog (8),
.BR eeprom (8)
.SH AUTHOR
Daniel Smolik