2017-12-22 12:01:50 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Release 0.2

2017-12-22 12:01:31 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Fix spelling: interace => interface; explicitely => explicitly

2017-12-22 11:54:01 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Add a new option -n which cause that igmpproxy would not run as a daemon

2017-12-22 11:14:25 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Escape leading dot in man page

2017-12-22 11:10:27 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Use _GNU_SOURCE instead of _BSD_SOURCE which is deprecated

2017-12-21 20:33:32 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Disable -Wno-error=unused-but-set-variable on Travis

2017-12-21 20:33:21 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Declare loop variable outside block

2017-12-21 20:16:28 +0100  Pali Rohár <pali.rohar@gmail.com>

	* On Travis use -Wno-error=unused-but-set-variable and let autoconf to enable C99

2017-12-21 19:41:10 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Enable -Werror on Travis

2017-12-21 19:40:07 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Try to fix problems with strict aliasing

2017-12-21 16:30:51 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Fix compile warning: this 'if' clause does not guard...

2017-12-21 16:20:56 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Define _POSIX_C_SOURCE and _BSD_SOURCE to allow compilation with --std=c99

2017-12-21 16:20:13 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Include config.h before any other files to make its effect

2017-12-21 16:16:47 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Fix compile warning: unused variable

2017-12-21 16:15:35 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Fix compile warning: comparison between signed and unsigned integer expressions

2017-12-21 15:26:08 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Generate ChangeLog file to be more compatible with GNU format

2017-12-21 15:23:47 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Add missing file autogen.sh into EXTRA_DIST

2017-12-21 15:23:27 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Add missing file os-qnxnto.h into igmpproxy_SOURCES

2017-10-30 17:33:43 +0100  Pali Rohár <pali.rohar@gmail.com>

	* On Travis test with more compilers (gcc, clang, tcc) and for both 32bit and 64bit platforms

2017-05-05 10:20:11 +0200  Victor Toni <victor.toni@gmail.com>

	* Renamed 'upStreamVif' to 'upStreamIfIdx' for clarity.

	  Signed-off-by: Victor Toni <victor.toni@gmail.com>

2017-05-05 10:01:38 +0200  Victor Toni <victor.toni@gmail.com>

	* Replaced tabs with 4 whitespaces and removed trailing whitespaces.

	  Signed-off-by: Victor Toni <victor.toni@gmail.com>

2017-05-05 08:56:03 +0200  Victor Toni <victor.toni@gmail.com>

	* Added used upstream VIF to logging.

	  Signed-off-by: Victor Toni <victor.toni@gmail.com>

2017-04-04 19:57:39 +0000  Vladimir Panteleev <git@thecybershadow.net>

	* igmp: Fix incorrect index calculation of upstream VIF

	  igmpproxy uses a number of different kinds of indices to identify
	  interfaces:

	  - The system interface index, as used by IfDescVc / getIfByIx. These
	    identify and enumerate all interfaces on the system.
	  - The Virtual Interface Index (VIF). These identify only those
	    interfaces which take part in multicast routing.
	  - The upstream interface index, as used in upStreamVif, which
	    identifies/enumerates only those interfaces that are configured as
	    multicast upstream interfaces in igmpproxy's configuration.

	  activateRoute's expected a VIF index for its upstrVif parameter,
	  however it was being passed upStreamVif[i]-1 (i.e. the system
	  interface index of the upstream interface, minus one, where i is the
	  current upstream interface index being iterated).

	  It is unclear what the logic was behind the upStreamVif[i]-1
	  expression, as it existed ever since the upstrVif parameter was
	  introduced in b55e0125c79fc9dbc95c6d6ab1121570f0c6f80f. igmpproxy
	  working as expected highly depended on the system configuration and
	  enumeration order of network interfaces.

2017-03-25 16:57:07 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Fix typo recieves => receives

2017-03-25 16:57:03 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Fix typo availible => available

2017-03-25 16:56:58 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Fix typo interupt => interrupt

2017-03-25 16:56:51 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Fix typo recieved => received

2017-03-25 16:56:43 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Fix manpage, escape leading dot

2017-03-25 16:52:31 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Add configuration for Travis CI

2017-03-25 16:52:01 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Rename bootstrap to autogen.sh

2017-03-25 16:48:51 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Update homepage

2017-03-25 13:16:46 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Apply 3-clause BSD license on the mrouted source code

	  mrouted was originally licensed under the proprietary Stanford license.
	  Later, in March 2003 OpenBSD team managed to convince Stanford to release
	  mrouted under a free BSD-3-clause license. See details at:
	  http://www.openbsd.org/cgi-bin/cvsweb/src/usr.sbin/mrouted/LICENSE
	  http://troglobit.com/mrouted.html

	  igmpproxy is licensed under the proprietary Stanford and GPL-2+ license,
	  but all authors and contributors of igmpproxy agreed that their changes and
	  contributions can be licensed under GPL-2+ license.

	  So now igmpproxy software can be redistributed under BSD-3-clause and
	  GPL-2+. And so is finally GPL-2+ compatible.

	  Below are agreement sent by all igmpproxy contributors:

	  ===========================================================================

	  From: Pali Rohár <pali.rohar@gmail.com>
	  Subject: igmpproxy: Request for GPLv2+ license for your contribution
	  Date: Fri, 2 Dec 2016 18:39:07 +0100
	  Message-Id: <201612021839.08107@pali>
	  Do you agree that your igmpproxy contributions can be licensed under
	  GPLv2+ license?

	  From: Conrad Kostecki <ck@conrad-kostecki.de>
	  Date: Fri, 02 Dec 2016 17:40:35 +0000
	  Message-Id: <em47684c24-25ab-4fd0-b4aa-e830e378ebec@valkyrie>
	  yes, I agree!

	  From: Alexey Charkov <alchark@gmail.com>
	  Date: Fri, 2 Dec 2016 21:17:19 +0300
	  Message-ID: <CABjd4YzNj8MOJhZG7O4-6K9_-t4anypu1YRTkQ8gQSEtTMBJgw@mail.gmail.com>
	  Agreed.

	  From: Johnny Egeland <johnnyege@gmail.com>
	  Date: Fri, 2 Dec 2016 19:43:07 +0100
	  Message-ID: <CAD4Kcc26CV5uSurVeoot1v4+3K12sQRwqzg7-0Dxij5kqUJ0PA@mail.gmail.com>
	  Yes, I definitely do ;-)

	  From: Martin Djernaes <martin@djernaes.dk>
	  Date: Mon, 5 Dec 2016 11:06:57 +0100
	  Message-ID: <CAHNoM5KpwPCt8wt53=uqmKJgo7pt4XPUcFJ7eAUMs_H5LTw9xA@mail.gmail.com>
	  Yes that is fine.

	  From: Damjan Cvetko <damjan.cvetko@gmail.com>
	  Date: Tue, 6 Dec 2016 12:52:50 +0100
	  Message-ID: <CAKHrGec4RA6gn8mH09MirKXwdNSQH4WkZX89ajukziNXrbqQ_g@mail.gmail.com>
	  Yes, I agree with the change of licencing of my contributions to igmpproxy
	  project.

	  From: Christian Ruppert <idl0r@qasl.de>
	  Date: Tue, 06 Dec 2016 13:24:47 +0100
	  Message-ID: <62abfbeb145413490632bcc307b8ef0d@qasl.de>
	  I agree relicensing it/my contribution(s) under GPLv2+!

	  From: Konstantin Baranov <const@mimas.ru>
	  Date: Tue, 6 Dec 2016 09:02:06 -0800
	  Message-ID: <CAM5obhDChMwKKhvEZMSWhz-ON2ZsaOgFf29mXkw2DS4wakFJrA@mail.gmail.com>
	  Yes, I do agree.

	  ===========================================================================

	  From: Pali Rohár <pali.rohar@gmail.com>
	  Subject: igmpproxy: Request for GPLv2+ license for your patches
	  Date: Sat, 10 Dec 2016 18:42:54 +0100
	  Message-Id: <201612101737.59917@pali>
	  Do you agree that your igmpproxy patches can be licensed under GPLv2+
	  license?

	  From: Antti Seppälä <a.seppala@gmail.com>
	  Date: Sat, 10 Dec 2016 18:45:15 +0200
	  Message-ID: <CAKv9HNbWq86b64MrDnaCscDsjxvZX_kJ0j7LLabzFngfKFh9Nw@mail.gmail.com>
	  I agree that my igmpproxy patches can be licensed under GPLv2+.

	  From: Jonas Gorski <jonas.gorski@gmail.com>
	  Date: Sat, 10 Dec 2016 18:24:35 +0100
	  Message-ID: <CAOiHx=k8r=rhodMCPdjNzh1opLWmDWxAFJKhNPxWbLRG0KC5+Q@mail.gmail.com>
	  Yes, fine by me.

	  From: Ambroz Bizjak <ambrop7@gmail.com>
	  Date: Sat, 10 Dec 2016 18:51:00 +0100
	  Message-ID: <CAOA3yKLqLE58UvgK2+Y6LJsTRpKotFKaZNSSMQAOX-43_VA+yw@mail.gmail.com>
	  I agree that any of my igmpproxy patches are licensed under GPLv2+.

	  From: Tim Ruehsen <rockdaboot@gmail.com>
	  Date: Sat, 10 Dec 2016 19:05:29 +0100
	  Message-ID: <CAEYqemEByfOn6kgEU6vwySX6Bu+5K7A29g2N80-oovxgZSpFBA@mail.gmail.com>
	  feel free to relicense my patches to GPLv2+.

	  From: Felix Fietkau <nbd@nbd.name>
	  Date: Sat, 10 Dec 2016 21:08:20 +0100
	  Message-ID: <73bd287a-3566-8a9b-ca4d-e9eadcc82eb7@nbd.name>
	  Yes, I agree.

	  From: Gustavo Zacarias <gustavo@zacarias.com.ar>
	  Date: Sat, 10 Dec 2016 17:21:30 -0300
	  Message-ID: <6b1796a9-c710-ef03-0a1a-649b94ac522a@zacarias.com.ar>
	  It's fine for my contribution.

	  From: Maxim Shvyndya <mshvyndya@gmail.com>
	  Date: Sat, 10 Dec 2016 22:33:47 +0200
	  Message-ID: <CAMKJLpZE3SRuTJ_iHH9PTmGtU_2yptTVi=rkf=Xx_FLF+WuN6g@mail.gmail.com>
	  I agree that my igmpproxy patches can be licensed under GPLv2+ license.

	  From: Stefan Becker <chemobejk@gmail.com>
	  Date: Sun, 11 Dec 2016 15:44:11 +0200
	  Message-ID: <CAOJ2eMfJ67TH6memszB3kZ18vS1=X7rWj8ZuEFq3owcU_WmxEA@mail.gmail.com>
	  I have no problem to upgrade that to GPLv2.

	  From: Pali Rohár <pali.rohar@gmail.com>
	  To: Stefan Becker <chemobejk@gmail.com>
	  Date: Sun, 11 Dec 2016 14:54:31 +0100
	  Message-Id: <201612111454.31472@pali>
	  Thank you! But I would like to have not only GPLv2, but GPLv2+ (either
	  version 2 of the GNU General Public License, or any later version) as
	  whole igmpproxy project.

	  From: Stefan Becker <chemobejk@gmail.com>
	  Date: Sun, 11 Dec 2016 16:01:18 +0200
	  Message-ID: <CAOJ2eMf9=F-Uno6_R_TEhYG8U2cJJnpaWTCSuev-0e_uyivJTQ@mail.gmail.com>
	  I'm fine with GPLv2+, GPLv3 or whatever...

	  From: Natanael Copa <ncopa@alpinelinux.org>
	  Date: Sun, 11 Dec 2016 11:53:35 -0300
	  Message-ID: <20161211115335.500c31ea@ncopa-macbook.copa.dup.pw>
	  I agree that my patch can be licensed under GPLv2+ or new mrouted BSD license.

	  From: Victor Toni <victor.toni@gmail.com>
	  Date: Tue, 14 Mar 2017 13:28:59 +0100
	  Message-ID: <CAG0OSgcrJRU=E7VJ7vODCamDj8-4F38yUTRPdbz=t0QpFmqKhA@mail.gmail.com>
	  I agree that all my contributions to igmpproxy can be licensed under GPLv2+.

	  From: Erik Tews <erik@datenzone.de>
	  Date: Tue, 14 Mar 2017 13:46:48 +0000
	  Message-ID: <1489499208.3441.0.camel@datenzone.de>
	  Yes, I'M OK with that.

	  From: Michael Marschalkowski <grinch@itg-em.de>
	  Date: Tue, 14 Mar 2017 14:54:04 +0100
	  Message-ID: <135c7813-7222-ddf8-4d87-8a3ecc931fd0@itg-em.de>
	  you can include my patches under GPLv2+ license.

	  From: Mike C. Fletcher <mcfletch@vrplumber.com>
	  Date: Tue, 14 Mar 2017 10:31:37 -0400
	  Message-ID: <6782d9d1-77bd-d95d-de25-e0ec62fa9567@vrplumber.com>
	  However, to formally clear the hurdle, I hereby declare that any
	  contributions I have made are licensed under the 2-clause BSD license,
	  and that as such you can merge them into your work and re-license under
	  GPL-v2+.

	  From: Leonid Lisovskiy <lly.dev@gmail.com>
	  Date: Tue, 14 Mar 2017 17:42:37 +0300
	  Message-ID: <CAF5PLbs+qOMH9POQUgoUm2RpYUKu-+ZUGEBhwhBxx2HD7iTBsA@mail.gmail.com>
	  Yes, I am agree that my igmpproxy patches can be licensed under GPLv2+ license.

	  From: Evgeny Yurchenko <ey@tm-k.com>
	  Date: Tue, 14 Mar 2017 16:02:22 -0400
	  Message-ID: <20170314200222.8515670.78274.2935@tm-k.com>
	  Yes, I agree.

	  From: Watch Me <aimwang@gmail.com>
	  Date: Wed, 15 Mar 2017 11:11:14 +0800
	  Message-ID: <CAMThHmbO78Gtne4yQ=Xy3pO=9ie_NyvR5cjDraBnV9HeWnqgHQ@mail.gmail.com>
	  I agree.

	  From: Vladislav Grishenko <themiron.ru@gmail.com>
	  Date: Sat, 25 Mar 2017 17:08:11 +0500
	  Message-ID: <000301d2a560$79bc6940$6d353bc0$@gmail.com>
	  Sure, I conditionally permit GPLv2+ license my patches if they has my authorship in git history.

	  ===========================================================================

2017-03-25 11:41:21 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Clarify smcroute 0.92 license correctly

	  Original smcroute 0.92 can be redistributed and/or modified under the terms
	  of the GNU General Public License as published by the Free Software
	  Foundation; either version 2 of the License, or (at your option) any later
	  version.

	  Source: http://www.cschill.de/smcroute/

2016-04-27 21:12:57 +0200  Victor Toni <victor.toni@gmail.com>

	* Replace call to setpgrp with setpgid

	  Linux and FreeBSD use a different signature for setpgrp.
	  Both support setpgid which replaces the now obsolete setpgrp and has the same signature on both systems.
2016-04-06 20:20:57 +0200  Victor Toni <victor.toni@gmail.com>

	* Minor change in wording of logging message.

2016-04-02 01:03:21 +0200  Victor Toni <victor.toni@gmail.com>

	* Adding support for fbsd 9/10 due to changes in struct ip.

	  Original patch submitted by: yuri@rivera.ru

2015-01-18 01:42:43 +0100  Antti Seppälä <a.seppala@gmail.com>

	* add patch to silence unnecessary logging of downstream igmp traffic

	  This patch adds a simple check to silence logging of messages about
	  unrecognized igmp packets which originate from devices in local network.

	  Without this patch igmpproxy floods openwrt syslog with messages such as:

	    user.warn igmpproxy[19818]: The source address 192.168.1.175 for group
	    239.255.250.250, is not in any valid net for upstream VIF.

	  Signed-off-by: Antti Seppälä <a.seppala@gmail.com>

2014-08-03 12:45:31 +0200  Felix Fietkau <nbd@openwrt.org>

	* add missing include

	  Signed-off-by: Felix Fietkau <nbd@openwrt.org>

2012-03-29 17:01:11 +0200  Jonas Gorski <jonas.gorski@gmail.com>

	* use monotic clock instead of time of day

	  The time of day might chance e.g. by daylight savings time during the
	  runtime, which causes timers to fire repeatedly for a long time.

	  Contributed by T-Labs, Deutsche Telekom Innovation Laboratories

	  Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

2012-03-04 10:46:28 +0100  Ambroz Bizjak <ambrop7@users.sourceforge.net>

	* Support multiple multicast sources

	  If a multicast packet comes in on the upstream interface to a group
	  address, but from a different IP source than previously seen, igmpproxy
	  will forget about the old source, and the corresponding multicast route
	  will time out shortly - even if the multicast stream from the original
	  source is never interrupted.

	  I haven't investigated what in particular the suspicious packet is; it did
	  however originate from the multicast router.

	  The submitted patch resolves the issue by adding support for multiple
	  source IPs for any given group. Instead of keeping a single source address,
	  MAX_ORIGINS addresses are kept. If we run out of source address slots, the
	  least recently used one will be reused.

2012-07-28 11:36:55 +0200  Vladislav Grishenko <themiron@mail.ru>

	* add igmpv3 clients support

2009-09-15 18:08:34 +0200  Leonid Lisovskiy <lly.dev@gmail.com>

	* implement daemonization

2009-01-02 14:48:41 +0100  Vladislav Grishenko <themiron@mail.ru>

	* ignore upnp

2009-03-31 19:41:41 +0200  Leonid Lisovskiy <lly.dev@gmail.com>

	* fix timer queue

2009-01-02 14:48:41 +0100  Vladislav Grishenko <themiron@mail.ru>

	* allow zero altnet

2009-09-23 17:53:23 +0200  Leonid Lisovskiy <lly.dev@gmail.com>

	* Fix memleak

2009-09-15 18:08:34 +0200  Leonid Lisovskiy <lly.dev@gmail.com>

	* fix compilation warnings

2014-03-03 12:11:26 +0000  Natanael Copa <ncopa@alpinelinux.org>

	* Use standard unsigned integer types

	  Use the stanard unsigned integer types instead of the non-standard
	  u_char, u_short and u_int.

	  This fixes build with musl libc.

2015-09-28 10:37:04 -0400  Mike C. Fletcher <mcfletch@vrplumber.com>

	* Fix case where we want to specify 0.0.0.0/0 but config disallows

	  Config parser disallows cases where we use 0.0.0.0/whatever because
	  it checks for address != 0, but sometime we actually want to say
	  "everything that isn't from an internal address" and so specify that
	  0.0.0.0 address. This makes the check take the network mask into
	  consideration when checking for the incoming address.

2014-03-12 21:50:00 +0000  Gustavo Zacarias <gustavo@zacarias.com.ar>

	* configure.ac: uclinux is also linux

	  Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>

2013-10-31 21:05:00 +0000  Aim Wang <aimwang@users.sourceforge.net>

	* downstream link change detect on the fly

	  This patch can work on a PPP server. When PPP client link up, the new link
	  will set as downstrem interface automatically.

	  New feature:
	  1. Multiple upstream interface
2. Set default Vif State in config file
	  3. Swith auto scan function on/off in config file.

	  When config file have set "defaultdown" means VIFs default status is
	  downstream, oterwise will be disable.

	  When config file have set "rescanvif" the igmpproxy will scan the interface
	  state and auto add new Vif, it is very helpful in ppp links.

2012-09-17 02:44:00 +0000  Aim Wang <aimwang@users.sourceforge.net>

	* ppp end point IP patch

	  When the link is PPP (flag = 0x10d1) should get the P-t-P address to use.
	  Or received report from P-t-P address will get warring message
	  [No interfaces found for source %s].

2012-05-30 08:53:00 +0000  Tim Ruehsen <rockdaboot@users.sourceforge.net>

	* fixed gcc warnings

	  the patch fixes several gcc (4.7.0) warnings like missing or old-style prototypes, const issues, unused parameters, etc

	  * igmpproxy.h: fix gcc warnings [-Wstrict-prototypes]
	  * igmpproxy.c: fix gcc warnings [-Wstrict-prototypes] [-Wold-style-definition]
	  * callout.c: fix gcc warnings [-Wold-style-definition]
	  * config.c: fix gcc warnings [-Wold-style-definition] [-Wstrict-prototypes] [-Wmissing-prototypes]
	  * confread.c: fix gcc warnings [-Wold-style-definition]
	  * ifvc.c: fix gcc warnings [-Wold-style-definition] [-Wmissing-prototypes]
	  * igmp.c: fix gcc warnings [-Wold-style-definition] [-Wmissing-prototypes]
	  igmpPacketKind() return type fixed to 'const char *'
	  * mroute-api.c: fix gcc warnings [-Wold-style-definition]
	  * request.c: fix gcc warnings [-Wold-style-definition] [-Wunused-parameter]
	  cast second arg to timer_setTimer() to timer_f
	  * rttable.c: fix gcc warnings [-Wold-style-definition] [-Wstrict-prototypes] [-Wmissing-prototypes]
	  logRouteTable() fixed argument to 'const char *'

2011-12-02 08:27:12 +0200  Maxim Shvyndya <mshvyndya@gmail.com>

	* QNX 6 support enabling

2015-03-11 20:40:22 +0100  Erik Tews <erik@datenzone.de>

	* Improved the handling of groups that are used on more than one interface.

	  This patch has two effects. First, the quickleave feature/behaviour is disabled for all groups that are used on more than one interface. The idea of quickleave is to leave a group fast and later figure out whether there is still somebody interested in that group. For groups used on more than one interface, it is already known that there is still somebody interested in that group.

	  Second, when a leave is received for a group that is used on more than one interface, igmpproxy sends queries on all interface to discover remeining listeners for that group. Previously these queries were only send on the interface the leave was received on, so that listeners on the other interfaces were not discovered and the group might be left on the upstream router incorrectly.

	  This patch can be improved by sending the queries only on the interface the leave was received on and adapting the algorithm in internAgeRoute(...) in rttable.c in a way that only one interface is actually processed and all other interfaces of the route are silently assumed to be still active.

2009-12-11 21:08:57 +0200  Stefan Becker <stefan.becker@nokia.com>

	* Restrict igmp reports forwarding to upstream interface

	  Utilize the new "whitelist" keyword also on the upstream interface definition.
	  If specified then only whitelisted multicast groups will be forwarded upstream.

	  This can be used to avoid publishing private multicast groups to the world,
	  e.g. SSDP from a UPnP server on the internal network.

2010-02-23 21:08:02 +0400  Constantin Baranov <const@mimas.ru>

	* Change default interface state to disabled (wrt #2945877)

2010-01-04 05:13:59 +0500  Evgeny Yurchenko <evg.yurch@rogers.com>

	* Send IGMP packets with IP Router Alert option [RFC 2113] included in IP header

2009-10-05 23:07:06 +0500  Constantin Baranov <const@mimas.ru>

	* Merge branch '0.1'

	  * 0.1:
	    Release 0.1
	    Fix building on FreeBSD 8.0 (wrt #2870461)
	    Fix netmask detection on interfaces with multiple addresses
	    Generate ChangeLog and AUTHORS by Git

2009-10-05 21:31:42 +0500  Constantin Baranov <const@mimas.ru>

	* Release 0.1

2009-10-01 00:09:38 +0500  Constantin Baranov <const@mimas.ru>

	* Fix building on FreeBSD 8.0 (wrt #2870461)

	  Several IGMP_* macroses was deprecated in r189347/v800069 and
	  removed in r193938/v800098. Redefine them if needed.

2009-09-06 16:41:22 +0500  Martin Djernaes <djernaes@users.sourceforge.net>

	* Fix netmask detection on interfaces with multiple addresses

	  When having multiple IP addresses on an interface the netmask retrieved for
	  each IP address is not correct. The reason is that ioctrl for
	  SIOCGIFNETMASK will just provide the first netmask when no IP address is
	  provided in the call.

2009-09-04 01:38:27 +0500  Constantin Baranov <const@mimas.ru>

	* Generate ChangeLog and AUTHORS by Git

2009-08-16 19:58:26 +0500  Grinch <grinch79@users.sourceforge.net>

	* Restrict igmp reports for downstream interfaces (wrt #2833339)

	  atm all igmp membership reports are forwarded to the upstream interface.
	  Unfortunately some ISP Providers restrict some multicast groups (esp. those
	  that are defined as local link groups and that are not supposed to be
	  forwarded to the wan, i.e 224.0.0.0/24). Therefore there should be some
	  kind of black oder whitelisting.
	  As whitelisting can be accomplished quite easy I wrote a litte patch, which
	  is attached to this request.

2009-08-16 19:45:04 +0500  Constantin Baranov <const@mimas.ru>

	* Release 0.1 beta5

2009-08-16 19:28:30 +0500  Damjan Cvetko <zobo@users.sourceforge.net>

	* Improve getIfByAddress() function (wrt #2835052)

	  getIfByAddress does not find the best iterface in case of overlaping
	  networks. This patchs scans through all interfaces (and networks) and picks
	  the one with the longest subnet.

2009-08-16 18:37:58 +0500  Constantin Baranov <const@mimas.ru>

	* Fix nextConfigToken() function (wrt #2838154)

	  The nextConfigToken() returns NULL when EOF reached even if token
	  was read already. This results in loss of last token in file usually.
	  Let it return unterminated token if it is non-empty already.

2009-05-14 01:14:56 +0500  Constantin Baranov <const@mimas.ru>

	* Release 0.1 beta4

2009-05-14 01:10:35 +0500  Constantin Baranov <const@mimas.ru>

	* Update README etc.

2009-05-14 01:06:44 +0500  Constantin Baranov <const@mimas.ru>

	* State licenses in the COPYING

2009-05-10 05:01:21 +0500  Constantin Baranov <const@mimas.ru>

	* Remove pointless backslashes in configure.ac

2009-05-10 02:19:30 +0500  Constantin Baranov <const@mimas.ru>

	* Replace bzero() with memset()

2009-05-09 02:09:28 +0500  Constantin Baranov <const@mimas.ru>

	* Remove redundant #include

2009-05-09 02:00:03 +0500  Constantin Baranov <const@mimas.ru>

	* Add DragonFly BSD support

2009-05-09 01:57:07 +0500  Constantin Baranov <const@mimas.ru>

	* Add missed format argument in acceptLeaveMessage()

2009-05-06 01:29:04 +0500  Constantin Baranov <const@mimas.ru>

	* Avoid inclusion if linux/in.h (wrt #2787118)

	  The linux/in.h header conflicts with the netinet/in.h header in
	  certain Linux distributions. So let's ensure that linux/in.h will
	  never be included neither directly nor from linux/mroute.h.

2009-05-03 22:00:33 +0500  Constantin Baranov <const@mimas.ru>

	* Release 0.1 beta3

2009-05-03 21:53:56 +0500  Constantin Baranov <const@mimas.ru>

	* Show version in help message

	  Also remove unused Version constant.

2009-05-03 21:43:01 +0500  Constantin Baranov <const@mimas.ru>

	* Remove IF_DEBUG macros

	  IF_DEBUG macros hides my_log(LOG_DEBUG...) calls. Thus it is redundant.

2009-05-03 21:29:16 +0500  Constantin Baranov <const@mimas.ru>

	* Break long lines in build scripts

2009-05-03 21:19:19 +0500  Constantin Baranov <const@mimas.ru>

	* Remove hardcoded version strings from man pages

2009-05-03 20:52:58 +0500  Constantin Baranov <const@mimas.ru>

	* Move mrouted-LICENSE out of doc directory

2009-05-03 20:32:31 +0500  Constantin Baranov <const@mimas.ru>

	* Use strdup() instead of malloc() and strcpy()

2009-05-03 20:30:44 +0500  Constantin Baranov <const@mimas.ru>

	* Eliminate message about IGMP_MEMBERSHIP_QUERY ignored

2009-05-03 20:25:30 +0500  Constantin Baranov <const@mimas.ru>

	* Add OpenBSD support

2009-05-03 04:16:53 +0500  Constantin Baranov <const@mimas.ru>

	* Add NetBSD support

2009-05-02 05:07:12 +0500  Constantin Baranov <const@mimas.ru>

	* Remove outdated bug report email address

2009-05-02 04:49:38 +0500  Constantin Baranov <const@mimas.ru>

	* Improve OS checking mechanism

	  Hide all OS-specific things in os-*.h headers and let autoconf select
	  proper header. Also add check for struct sockaddr_in.sin_len member.

2009-05-02 04:48:23 +0500  Constantin Baranov <const@mimas.ru>

	* Do not close std* streams in non-debug mode

2009-04-17 21:16:47 +0500  Constantin Baranov <const@mimas.ru>

	* Clean up configure.ac and add check for sockaddr.sa_len member

2009-04-17 20:04:32 +0500  Constantin Baranov <const@mimas.ru>

	* Install igmpproxy to sbin directory

2009-04-17 20:03:46 +0500  Constantin Baranov <const@mimas.ru>

	* Add missing igmpproxy.h to list of sources

2009-04-09 21:28:04 +0500  Christian Ruppert <idl0r@gentoo.org>

	* Add missing 'h' to the getopt() optstring

2009-04-04 00:38:37 +0500  Constantin Baranov <const@mimas.ru>

	* Rework logging

	  Allow to control verbosity with -v option.
	  Don't write to syslog in debug mode.
	  Don't fork in background. Let start-stop-deamon do this.

	  Also update man-pages and help messages.

2009-04-04 00:38:06 +0500  Constantin Baranov <const@mimas.ru>

	* Move igmpproxy.conf out of src directory

2009-03-09 22:03:46 +0400  Constantin Baranov <const@mimas.ru>

	* Initial FreeBSD support

	  Based on IGMPproxy port to FreeBSD made by
	  Pavel Korshunov and gygenot.

2009-03-08 20:37:17 +0400  Constantin Baranov <const@mimas.ru>

	* Move to C99 and clean up the code

	  Listen to compiler's warnings.
	  Use standard integer and boolean types.
	  Remove redundant version.h.

2009-03-08 17:53:24 +0400  Constantin Baranov <const@mimas.ru>

	* Rename defs.h to igmpproxy.h

2009-03-08 16:17:20 +0400  Constantin Baranov <const@mimas.ru>

	* Add bootstrap script

2009-02-27 22:28:03 +0400  Constantin Baranov <const@mimas.ru>

	* Remove stuff generated by autotools

2009-02-23 00:36:39 +0400  Constantin Baranov <const@mimas.ru>

	* Fix logging to syslog

	  Do not write textual representation of message severity
	  because syslog can do this itself. Also write only one
	  string at a time.

2009-02-23 00:22:20 +0400  Constantin Baranov <const@mimas.ru>

	* chmod -x on appropriate files

2009-02-23 00:18:48 +0400  Conrad Kostecki <ConiKost@gmx.de>

	* Remove banner

2009-02-23 00:13:03 +0400  Alexey Charkov <alchark@gmail.com>

	* Enable autotools

	  I've packaged igmpproxy with GNU autotools, which will allow for a better
	  experience on Gentoo (CFLAGS, directory structure etc). Also, compile-time
	  warnings are fixed. As the project is dead, this is not even a fork :)

2009-02-23 00:10:48 +0400  Johnny Egeland <johnnyege@users.sourceforge.net>

	* Initial import