.TH DEVLINK\-DEV 8 "14 Mar 2016" "iproute2" "Linux"
.SH NAME
devlink-dev \- devlink device configuration
.SH SYNOPSIS
.sp
.ad l
.in +8
.ti -8
.B devlink
.RI "[ " OPTIONS " ]"
.B dev
.RI  " { " COMMAND " | "
.BR help " }"
.sp

.ti -8
.IR OPTIONS " := { "
\fB\-V\fR[\fIersion\fR] |
\fB\-n\fR[\fIno-nice-names\fR] }

.ti -8
.B devlink dev show
.RI "[ " DEV " ]"

.ti -8
.B devlink dev help

.ti -8
.BR "devlink dev eswitch set"
.IR DEV
.RI "[ "
.BR mode " { " legacy " | " switchdev " } "
.RI "]"
.RI "[ "
.BR inline-mode " { " none " | " link " | " network " | " transport " } "
.RI "]"
.RI "[ "
.BR encap " { " disable " | " enable " } "
.RI "]"

.ti -8
.BR "devlink dev eswitch show"
.IR DEV

.ti -8
.BR "devlink dev param set"
.IR DEV
.BR name
.IR PARAMETER
.BR value
.IR VALUE
.BR cmode " { " runtime " | " driverinit " | " permanent " } "

.ti -8
.BR "devlink dev param show"
.RI "[ "
.IR DEV
.BR name
.IR PARAMETER
.RI "]"

.ti -8
.BR "devlink dev reload"
.IR DEV

.ti -8
.BR "devlink dev info"
.RI "[ "
.IR DEV
.RI "]"

.ti -8
.BR "devlink dev flash"
.IR DEV
.BR file
.IR PATH
.RI "["
.BR target
.IR ID
.RI "]"

.SH "DESCRIPTION"
.SS devlink dev show - display devlink device attributes

.PP
.I "DEV"
- specifies the devlink device to show.
If this argument is omitted all devices are listed.

.in +4
Format is:
.in +2
BUS_NAME/BUS_ADDRESS

.SS devlink dev eswitch show - display devlink device eswitch attributes
.SS devlink dev eswitch set  - sets devlink device eswitch attributes

.TP
.BR mode " { " legacy " | " switchdev " } "
Set eswitch mode

.I legacy
- Legacy SRIOV

.I switchdev
- SRIOV switchdev offloads

.TP
.BR inline-mode " { " none " | " link " | " network " | " transport " } "
Some HWs need the VF driver to put part of the packet headers on the TX descriptor so the e-switch can do proper matching and steering.

.I none
- None

.I link
- L2 mode

.I network
- L3 mode

.I transport
- L4 mode

.TP
.BR encap " { " disable " | " enable " } "
Set eswitch encapsulation support

.I disable
- Disable encapsulation support

.I enable
- Enable encapsulation support

.SS devlink dev param set  - set new value to devlink device configuration parameter

.TP
.BI name " PARAMETER"
Specify parameter name to set.

.TP
.BI value " VALUE"
New value to set.

.TP
.BR cmode " { " runtime " | " driverinit " | " permanent " } "
Configuration mode in which the new value is set.

.I runtime
- Set new value while driver is running. This configuration mode doesn't require any reset to apply the new value.

.I driverinit
- Set new value which will be applied during driver initialization. This configuration mode requires restart driver by devlink reload command to apply the new value.

.I permanent
- New value is written to device's non-volatile memory. This configuration mode requires hard reset to apply the new value.

.SS devlink dev param show - display devlink device supported configuration parameters attributes

.BR name
.IR PARAMETER
Specify parameter name to show.
If this argument is omitted all parameters supported by devlink devices are listed.

.SS devlink dev reload - perform hot reload of the driver.

.PP
.I "DEV"
- Specifies the devlink device to reload.

.SS devlink dev info - display device information.
Display device information provided by the driver. This command can be used
to query versions of the hardware components or device components which
can't be updated (
.I fixed
) as well as device firmware which can be updated. For firmware components
.I running
displays the versions of firmware currently loaded into the device, while
.I stored
reports the versions in device's flash.
.I Running
and
.I stored
versions may differ after flash has been updated, but before reboot.

.PP
.I "DEV"
- specifies the devlink device to show.
If this argument is omitted all devices are listed.

.SS devlink dev flash - write device's non-volatile memory.

.PP
.I "DEV"
- specifies the devlink device to write to.

.BR file
.I PATH
- Path to the file which will be written into device's flash. The path needs
to be relative to one of the directories searched by the kernel firmware loaded,
such as /lib/firmware.

.BR component
.I NAME
- If device stores multiple firmware images in non-volatile memory, this
parameter may be used to indicate which firmware image should be written.
The value of
.I NAME
should match the component names from
.B "devlink dev info"
and may be driver-dependent.

.SH "EXAMPLES"
.PP
devlink dev show
.RS 4
Shows the state of all devlink devices on the system.
.RE
.PP
devlink dev show pci/0000:01:00.0
.RS 4
Shows the state of specified devlink device.
.RE
.PP
devlink dev eswitch show pci/0000:01:00.0
.RS 4
Shows the eswitch mode of specified devlink device.
.RE
.PP
devlink dev eswitch set pci/0000:01:00.0 mode switchdev
.RS 4
Sets the eswitch mode of specified devlink device to switchdev.
.RE
.PP
devlink dev param show pci/0000:01:00.0 name max_macs
.RS 4
Shows the parameter max_macs attributes.
.RE
.PP
devlink dev param set pci/0000:01:00.0 name internal_error_reset value true cmode runtime
.RS 4
Sets the parameter internal_error_reset of specified devlink device to true.
.RE
.PP
devlink dev reload pci/0000:01:00.0
.RS 4
Performs hot reload of specified devlink device.
.RE
.PP
devlink dev flash pci/0000:01:00.0 file firmware.bin
.RS 4
Flashes the specified devlink device with provided firmware file name. If the driver supports it, user gets updates about the flash status. For example:
.br
Preparing to flash
.br
Flashing 100%
.br
Flashing done

.SH SEE ALSO
.BR devlink (8),
.BR devlink-port (8),
.BR devlink-sb (8),
.BR devlink-monitor (8),
.br

.SH AUTHOR
Jiri Pirko <jiri@mellanox.com>