/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_KERNEL_H
#define _LINUX_KERNEL_H

#include <linux/stdarg.h>
#include <linux/align.h>
#include <linux/limits.h>
#include <linux/linkage.h>
#include <linux/stddef.h>
#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/bitops.h>
#include <linux/kstrtox.h>
#include <linux/log2.h>
#include <linux/math.h>
#include <linux/minmax.h>
#include <linux/typecheck.h>
#include <linux/panic.h>
#include <linux/printk.h>
#include <linux/build_bug.h>
#include <linux/static_call_types.h>
#include <asm/byteorder.h>

#include <uapi/linux/kernel.h>

#define STACK_MAGIC	0xdeadbeef

/**
 * REPEAT_BYTE - repeat the value @x multiple times as an unsigned long value
 * @x: value to repeat
 *
 * NOTE: @x is not checked for > 0xff; larger values produce odd results.
 */
#define REPEAT_BYTE(x)	((~0ul / 0xff) * (x))

/* generic data direction definitions */
#define READ			0
#define WRITE			1

/**
 * ARRAY_SIZE - get the number of elements in array @arr
 * @arr: array to be sized
 */
#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr))

#define PTR_IF(cond, ptr)	((cond) ? (ptr) : NULL)

#define u64_to_user_ptr(x) (		\
{					\
	typecheck(u64, (x));		\
	(void __user *)(uintptr_t)(x);	\
}					\
)

#define typeof_member(T, m)	typeof(((T*)0)->m)

#define _RET_IP_		(unsigned long)__builtin_return_address(0)
#define _THIS_IP_  ({ __label__ __here; __here: (unsigned long)&&__here; })

/**
 * upper_32_bits - return bits 32-63 of a number
 * @n: the number we're accessing
 *
 * A basic shift-right of a 64- or 32-bit quantity.  Use this to suppress
 * the "right shift count >= width of type" warning when that quantity is
 * 32-bits.
 */
#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))

/**
 * lower_32_bits - return bits 0-31 of a number
 * @n: the number we're accessing
 */
#define lower_32_bits(n) ((u32)((n) & 0xffffffff))

/**
 * upper_16_bits - return bits 16-31 of a number
 * @n: the number we're accessing
 */
#define upper_16_bits(n) ((u16)((n) >> 16))

/**
 * lower_16_bits - return bits 0-15 of a number
 * @n: the number we're accessing
 */
#define lower_16_bits(n) ((u16)((n) & 0xffff))

struct completion;
struct user;

#ifdef CONFIG_PREEMPT_VOLUNTARY

extern int __cond_resched(void);
# define might_resched() __cond_resched()

#elif defined(CONFIG_PREEMPT_DYNAMIC)

extern int __cond_resched(void);

DECLARE_STATIC_CALL(might_resched, __cond_resched);

static __always_inline void might_resched(void)
{
	static_call_mod(might_resched)();
}

#else

# define might_resched() do { } while (0)

#endif /* CONFIG_PREEMPT_* */

#ifdef CONFIG_DEBUG_ATOMIC_SLEEP
extern void ___might_sleep(const char *file, int line, int preempt_offset);
extern void __might_sleep(const char *file, int line, int preempt_offset);
extern void __cant_sleep(const char *file, int line, int preempt_offset);
extern void __cant_migrate(const char *file, int line);

/**
 * might_sleep - annotation for functions that can sleep
 *
 * this macro will print a stack trace if it is executed in an atomic
 * context (spinlock, irq-handler, ...). Additional sections where blocking is
 * not allowed can be annotated with non_block_start() and non_block_end()
 * pairs.
 *
 * This is a useful debugging help to be able to catch problems early and not
 * be bitten later when the calling function happens to sleep when it is not
 * supposed to.
 */
# define might_sleep() \
	do { __might_sleep(__FILE__, __LINE__, 0); might_resched(); } while (0)
/**
 * cant_sleep - annotation for functions that cannot sleep
 *
 * this macro will print a stack trace if it is executed with preemption enabled
 */
# define cant_sleep() \
	do { __cant_sleep(__FILE__, __LINE__, 0); } while (0)
# define sched_annotate_sleep()	(current->task_state_change = 0)

/**
 * cant_migrate - annotation for functions that cannot migrate
 *
 * Will print a stack trace if executed in code which is migratable
 */
# define cant_migrate()							\
	do {								\
		if (IS_ENABLED(CONFIG_SMP))				\
			__cant_migrate(__FILE__, __LINE__);		\
	} while (0)

/**
 * non_block_start - annotate the start of section where sleeping is prohibited
 *
 * This is on behalf of the oom reaper, specifically when it is calling the mmu
 * notifiers. The problem is that if the notifier were to block on, for example,
 * mutex_lock() and if the process which holds that mutex were to perform a
 * sleeping memory allocation, the oom reaper is now blocked on completion of
 * that memory allocation. Other blocking calls like wait_event() pose similar
 * issues.
 */
# define non_block_start() (current->non_block_count++)
/**
 * non_block_end - annotate the end of section where sleeping is prohibited
 *
 * Closes a section opened by non_block_start().
 */
# define non_block_end() WARN_ON(current->non_block_count-- == 0)
#else
  static inline void ___might_sleep(const char *file, int line,
				   int preempt_offset) { }
  static inline void __might_sleep(const char *file, int line,
				   int preempt_offset) { }
# define might_sleep() do { might_resched(); } while (0)
# define cant_sleep() do { } while (0)
# define cant_migrate()		do { } while (0)
# define sched_annotate_sleep() do { } while (0)
# define non_block_start() do { } while (0)
# define non_block_end() do { } while (0)
#endif

#define might_sleep_if(cond) do { if (cond) might_sleep(); } while (0)

#if defined(CONFIG_MMU) && \
	(defined(CONFIG_PROVE_LOCKING) || defined(CONFIG_DEBUG_ATOMIC_SLEEP))
#define might_fault() __might_fault(__FILE__, __LINE__)
void __might_fault(const char *file, int line);
#else
static inline void might_fault(void) { }
#endif

void do_exit(long error_code) __noreturn;
void complete_and_exit(struct completion *, long) __noreturn;

extern int num_to_str(char *buf, int size,
		      unsigned long long num, unsigned int width);

/* lib/printf utilities */

extern __printf(2, 3) int sprintf(char *buf, const char * fmt, ...);
extern __printf(2, 0) int vsprintf(char *buf, const char *, va_list);
extern __printf(3, 4)
int snprintf(char *buf, size_t size, const char *fmt, ...);
extern __printf(3, 0)
int vsnprintf(char *buf, size_t size, const char *fmt, va_list args);
extern __printf(3, 4)
int scnprintf(char *buf, size_t size, const char *fmt, ...);
extern __printf(3, 0)
int vscnprintf(char *buf, size_t size, const char *fmt, va_list args);
extern __printf(2, 3) __malloc
char *kasprintf(gfp_t gfp, const char *fmt, ...);
extern __printf(2, 0) __malloc
char *kvasprintf(gfp_t gfp, const char *fmt, va_list args);
extern __printf(2, 0)
const char *kvasprintf_const(gfp_t gfp, const char *fmt, va_list args);

extern __scanf(2, 3)
int sscanf(const char *, const char *, ...);
extern __scanf(2, 0)
int vsscanf(const char *, const char *, va_list);

extern int no_hash_pointers_enable(char *str);

extern int get_option(char **str, int *pint);
extern char *get_options(const char *str, int nints, int *ints);
extern unsigned long long memparse(const char *ptr, char **retptr);
extern bool parse_option_str(const char *str, const char *option);
extern char *next_arg(char *args, char **param, char **val);

extern int core_kernel_text(unsigned long addr);
extern int init_kernel_text(unsigned long addr);
extern int core_kernel_data(unsigned long addr);
extern int __kernel_text_address(unsigned long addr);
extern int kernel_text_address(unsigned long addr);
extern int func_ptr_is_kernel_text(void *ptr);

extern void bust_spinlocks(int yes);

extern int root_mountflags;

extern bool early_boot_irqs_disabled;

/*
 * Values used for system_state. Ordering of the states must not be changed
 * as code checks for <, <=, >, >= STATE.
 */
extern enum system_states {
	SYSTEM_BOOTING,
	SYSTEM_SCHEDULING,
	SYSTEM_RUNNING,
	SYSTEM_HALT,
	SYSTEM_POWER_OFF,
	SYSTEM_RESTART,
	SYSTEM_SUSPEND,
} system_state;

extern const char hex_asc[];
#define hex_asc_lo(x)	hex_asc[((x) & 0x0f)]
#define hex_asc_hi(x)	hex_asc[((x) & 0xf0) >> 4]

static inline char *hex_byte_pack(char *buf, u8 byte)
{
	*buf++ = hex_asc_hi(byte);
	*buf++ = hex_asc_lo(byte);
	return buf;
}

extern const char hex_asc_upper[];
#define hex_asc_upper_lo(x)	hex_asc_upper[((x) & 0x0f)]
#define hex_asc_upper_hi(x)	hex_asc_upper[((x) & 0xf0) >> 4]

static inline char *hex_byte_pack_upper(char *buf, u8 byte)
{
	*buf++ = hex_asc_upper_hi(byte);
	*buf++ = hex_asc_upper_lo(byte);
	return buf;
}

#ifdef __GENKSYMS__
extern int hex_to_bin(char ch);
#else
extern int hex_to_bin(unsigned char ch);
#endif
extern int __must_check hex2bin(u8 *dst, const char *src, size_t count);
extern char *bin2hex(char *dst, const void *src, size_t count);

bool mac_pton(const char *s, u8 *mac);

/*
 * General tracing related utility functions - trace_printk(),
 * tracing_on/tracing_off and tracing_start()/tracing_stop
 *
 * Use tracing_on/tracing_off when you want to quickly turn on or off
 * tracing. It simply enables or disables the recording of the trace events.
 * This also corresponds to the user space /sys/kernel/debug/tracing/tracing_on
 * file, which gives a means for the kernel and userspace to interact.
 * Place a tracing_off() in the kernel where you want tracing to end.
 * From user space, examine the trace, and then echo 1 > tracing_on
 * to continue tracing.
 *
 * tracing_stop/tracing_start has slightly more overhead. It is used
 * by things like suspend to ram where disabling the recording of the
 * trace is not enough, but tracing must actually stop because things
 * like calling smp_processor_id() may crash the system.
 *
 * Most likely, you want to use tracing_on/tracing_off.
 */

enum ftrace_dump_mode {
	DUMP_NONE,
	DUMP_ALL,
	DUMP_ORIG,
};

#ifdef CONFIG_TRACING
void tracing_on(void);
void tracing_off(void);
int tracing_is_on(void);
void tracing_snapshot(void);
void tracing_snapshot_alloc(void);

extern void tracing_start(void);
extern void tracing_stop(void);

static inline __printf(1, 2)
void ____trace_printk_check_format(const char *fmt, ...)
{
}
#define __trace_printk_check_format(fmt, args...)			\
do {									\
	if (0)								\
		____trace_printk_check_format(fmt, ##args);		\
} while (0)

/**
 * trace_printk - printf formatting in the ftrace buffer
 * @fmt: the printf format for printing
 *
 * Note: __trace_printk is an internal function for trace_printk() and
 *       the @ip is passed in via the trace_printk() macro.
 *
 * This function allows a kernel developer to debug fast path sections
 * that printk is not appropriate for. By scattering in various
 * printk like tracing in the code, a developer can quickly see
 * where problems are occurring.
 *
 * This is intended as a debugging tool for the developer only.
 * Please refrain from leaving trace_printks scattered around in
 * your code. (Extra memory is used for special buffers that are
 * allocated when trace_printk() is used.)
 *
 * A little optimization trick is done here. If there's only one
 * argument, there's no need to scan the string for printf formats.
 * The trace_puts() will suffice. But how can we take advantage of
 * using trace_puts() when trace_printk() has only one argument?
 * By stringifying the args and checking the size we can tell
 * whether or not there are args. __stringify((__VA_ARGS__)) will
 * turn into "()\0" with a size of 3 when there are no args, anything
 * else will be bigger. All we need to do is define a string to this,
 * and then take its size and compare to 3. If it's bigger, use
 * do_trace_printk() otherwise, optimize it to trace_puts(). Then just
 * let gcc optimize the rest.
 */

#define trace_printk(fmt, ...)				\
do {							\
	char _______STR[] = __stringify((__VA_ARGS__));	\
	if (sizeof(_______STR) > 3)			\
		do_trace_printk(fmt, ##__VA_ARGS__);	\
	else						\
		trace_puts(fmt);			\
} while (0)

#define do_trace_printk(fmt, args...)					\
do {									\
	static const char *trace_printk_fmt __used			\
		__section("__trace_printk_fmt") =			\
		__builtin_constant_p(fmt) ? fmt : NULL;			\
									\
	__trace_printk_check_format(fmt, ##args);			\
									\
	if (__builtin_constant_p(fmt))					\
		__trace_bprintk(_THIS_IP_, trace_printk_fmt, ##args);	\
	else								\
		__trace_printk(_THIS_IP_, fmt, ##args);			\
} while (0)

extern __printf(2, 3)
int __trace_bprintk(unsigned long ip, const char *fmt, ...);

extern __printf(2, 3)
int __trace_printk(unsigned long ip, const char *fmt, ...);

/**
 * trace_puts - write a string into the ftrace buffer
 * @str: the string to record
 *
 * Note: __trace_bputs is an internal function for trace_puts and
 *       the @ip is passed in via the trace_puts macro.
 *
 * This is similar to trace_printk() but is made for those really fast
 * paths that a developer wants the least amount of "Heisenbug" effects,
 * where the processing of the print format is still too much.
 *
 * This function allows a kernel developer to debug fast path sections
 * that printk is not appropriate for. By scattering in various
 * printk like tracing in the code, a developer can quickly see
 * where problems are occurring.
 *
 * This is intended as a debugging tool for the developer only.
 * Please refrain from leaving trace_puts scattered around in
 * your code. (Extra memory is used for special buffers that are
 * allocated when trace_puts() is used.)
 *
 * Returns: 0 if nothing was written, positive # if string was.
 *  (1 when __trace_bputs is used, strlen(str) when __trace_puts is used)
 */

#define trace_puts(str) ({						\
	static const char *trace_printk_fmt __used			\
		__section("__trace_printk_fmt") =			\
		__builtin_constant_p(str) ? str : NULL;			\
									\
	if (__builtin_constant_p(str))					\
		__trace_bputs(_THIS_IP_, trace_printk_fmt);		\
	else								\
		__trace_puts(_THIS_IP_, str, strlen(str));		\
})
extern int __trace_bputs(unsigned long ip, const char *str);
extern int __trace_puts(unsigned long ip, const char *str, int size);

extern void trace_dump_stack(int skip);

/*
 * The double __builtin_constant_p is because gcc will give us an error
 * if we try to allocate the static variable to fmt if it is not a
 * constant. Even with the outer if statement.
 */
#define ftrace_vprintk(fmt, vargs)					\
do {									\
	if (__builtin_constant_p(fmt)) {				\
		static const char *trace_printk_fmt __used		\
		  __section("__trace_printk_fmt") =			\
			__builtin_constant_p(fmt) ? fmt : NULL;		\
									\
		__ftrace_vbprintk(_THIS_IP_, trace_printk_fmt, vargs);	\
	} else								\
		__ftrace_vprintk(_THIS_IP_, fmt, vargs);		\
} while (0)

extern __printf(2, 0) int
__ftrace_vbprintk(unsigned long ip, const char *fmt, va_list ap);

extern __printf(2, 0) int
__ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap);

extern void ftrace_dump(enum ftrace_dump_mode oops_dump_mode);
#else
static inline void tracing_start(void) { }
static inline void tracing_stop(void) { }
static inline void trace_dump_stack(int skip) { }

static inline void tracing_on(void) { }
static inline void tracing_off(void) { }
static inline int tracing_is_on(void) { return 0; }
static inline void tracing_snapshot(void) { }
static inline void tracing_snapshot_alloc(void) { }

static inline __printf(1, 2)
int trace_printk(const char *fmt, ...)
{
	return 0;
}
static __printf(1, 0) inline int
ftrace_vprintk(const char *fmt, va_list ap)
{
	return 0;
}
static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { }
#endif /* CONFIG_TRACING */

/* This counts to 12. Any more, it will return 13th argument. */
#define __COUNT_ARGS(_0, _1, _2, _3, _4, _5, _6, _7, _8, _9, _10, _11, _12, _n, X...) _n
#define COUNT_ARGS(X...) __COUNT_ARGS(, ##X, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0)

#define __CONCAT(a, b) a ## b
#define CONCATENATE(a, b) __CONCAT(a, b)

/**
 * container_of - cast a member of a structure out to the containing structure
 * @ptr:	the pointer to the member.
 * @type:	the type of the container struct this is embedded in.
 * @member:	the name of the member within the struct.
 *
 */
#define container_of(ptr, type, member) ({				\
	void *__mptr = (void *)(ptr);					\
	BUILD_BUG_ON_MSG(!__same_type(*(ptr), ((type *)0)->member) &&	\
			 !__same_type(*(ptr), void),			\
			 "pointer type mismatch in container_of()");	\
	((type *)(__mptr - offsetof(type, member))); })

/**
 * container_of_safe - cast a member of a structure out to the containing structure
 * @ptr:	the pointer to the member.
 * @type:	the type of the container struct this is embedded in.
 * @member:	the name of the member within the struct.
 *
 * If IS_ERR_OR_NULL(ptr), ptr is returned unchanged.
 */
#define container_of_safe(ptr, type, member) ({				\
	void *__mptr = (void *)(ptr);					\
	BUILD_BUG_ON_MSG(!__same_type(*(ptr), ((type *)0)->member) &&	\
			 !__same_type(*(ptr), void),			\
			 "pointer type mismatch in container_of()");	\
	IS_ERR_OR_NULL(__mptr) ? ERR_CAST(__mptr) :			\
		((type *)(__mptr - offsetof(type, member))); })

/* Rebuild everything on CONFIG_FTRACE_MCOUNT_RECORD */
#ifdef CONFIG_FTRACE_MCOUNT_RECORD
# define REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD
#endif

/* Permissions on a sysfs file: you didn't miss the 0 prefix did you? */
#define VERIFY_OCTAL_PERMISSIONS(perms)						\
	(BUILD_BUG_ON_ZERO((perms) < 0) +					\
	 BUILD_BUG_ON_ZERO((perms) > 0777) +					\
	 /* USER_READABLE >= GROUP_READABLE >= OTHER_READABLE */		\
	 BUILD_BUG_ON_ZERO((((perms) >> 6) & 4) < (((perms) >> 3) & 4)) +	\
	 BUILD_BUG_ON_ZERO((((perms) >> 3) & 4) < ((perms) & 4)) +		\
	 /* USER_WRITABLE >= GROUP_WRITABLE */					\
	 BUILD_BUG_ON_ZERO((((perms) >> 6) & 2) < (((perms) >> 3) & 2)) +	\
	 /* OTHER_WRITABLE?  Generally considered a bad idea. */		\
	 BUILD_BUG_ON_ZERO((perms) & 2) +					\
	 (perms))
#endif