/*
 * arch/arm64/boot/dts/amlogic/mesongxl.dtsi
 *
 * Copyright (C) 2017 Amlogic, Inc. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 */

#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/amlogic,gxl-reset.h>
#include <dt-bindings/clock/amlogic,gxl-clkc.h>
#include <dt-bindings/iio/adc/amlogic-saradc.h>
#include <dt-bindings/gpio/gxl.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/input/meson_rc.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/pwm/meson.h>
#include "mesongxbb-gpu-mali450.dtsi"
/ {
	cpus:cpus {
		#address-cells = <2>;
		#size-cells = <0>;

		cpu-map {
			cluster0:cluster0 {
				core0 {
					cpu = <&CPU0>;
				};
				core1 {
					cpu = <&CPU1>;
				};
				core2 {
					cpu = <&CPU2>;
				};
				core3 {
					cpu = <&CPU3>;
				};
			};
		};
		CPU0:cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a53","arm,armv8";
			reg = <0x0 0x0>;
			enable-method = "psci";
			clocks = <&scpi_dvfs 0>;
			clock-names = "cpu-cluster.0";
			cpu-idle-states = <&SYSTEM_SLEEP_0>;
		};

		CPU1:cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a53","arm,armv8";
			reg = <0x0 0x1>;
			enable-method = "psci";
			clocks = <&scpi_dvfs 0>;
			clock-names = "cpu-cluster.0";
			cpu-idle-states = <&SYSTEM_SLEEP_0>;
		};
		CPU2:cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a53","arm,armv8";
			reg = <0x0 0x2>;
			enable-method = "psci";
			clocks = <&scpi_dvfs 0>;
			clock-names = "cpu-cluster.0";
			cpu-idle-states = <&SYSTEM_SLEEP_0>;
		};

		CPU3:cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a53","arm,armv8";
			reg = <0x0 0x3>;
			enable-method = "psci";
			clocks = <&scpi_dvfs 0>;
			clock-names = "cpu-cluster.0";
			cpu-idle-states = <&SYSTEM_SLEEP_0>;
		};


		idle-states {
			entry-method = "arm,psci";
			SYSTEM_SLEEP_0: system-sleep-0 {
				compatible = "arm,idle-state";
				arm,psci-suspend-param = <0x0020000>;
				local-timer-stop;
				entry-latency-us = <0x3fffffff>;
				exit-latency-us = <0x40000000>;
				min-residency-us = <0xffffffff>;
			};
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 13 0xff08>,
				<GIC_PPI 14 0xff08>,
				<GIC_PPI 11 0xff08>,
				<GIC_PPI 10 0xff08>;
	};
	timer_bc {
		compatible = "arm, meson-bc-timer";
		reg=   <0x0 0xc1109990 0x0 0x4 0x0 0xc1109994 0x0 0x4>;
		timer_name = "Meson TimerF";
		clockevent-rating=<300>;
		clockevent-shift=<20>;
		clockevent-features=<0x23>;
		interrupts = <0 60 1>;
		bit_enable=<16>;
		bit_mode=<12>;
		bit_resolution=<0>;
	};

	arm_pmu {
		compatible = "arm,armv8-pmuv3";
		/* clusterb-enabled; */
		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
		reg = <0x0 0xc8834680 0x0 0x4>;
		cpumasks = <0xf>;
		/* default 10ms */
		relax-timer-ns = <10000000>;
		/* default 10000us */
		max-wait-cnt = <10000>;
	};

	gic: interrupt-controller@2c001000 {
		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
		#interrupt-cells = <3>;
		#address-cells = <0>;
		interrupt-controller;
		reg = <0x0 0xc4301000 0 0x1000>,
		      <0x0 0xc4302000 0 0x0100>;
		interrupts = <GIC_PPI 9 0xf04>;
	};

	psci {
		compatible = "arm,psci-0.2";
		method = "smc";
	};

	meson_suspend:pm{
		compatible = "amlogic, pm";
		device_name = "aml_pm";
		reg = <0x0 0xc81000a8 0x0 0x4>,
			<0x0 0xc810023c 0x0 0x4>;
	};

	secmon {
		compatible = "amlogic, secmon";
		memory-region = <&secmon_reserved>;
		in_base_func = <0x82000020>;
		out_base_func = <0x82000021>;
		reserve_mem_size = <0x00300000>;
	};

	vcodec_dec {
		compatible = "amlogic, vcodec-dec";
		dev_name = "aml-vcodec-dec";
		status = "okay";
	};

	securitykey {
		compatible = "aml, securitykey";
		storage_query = <0x82000060>;
		storage_read = <0x82000061>;
		storage_write = <0x82000062>;
		storage_tell = <0x82000063>;
		storage_verify = <0x82000064>;
		storage_status = <0x82000065>;
		storage_list = <0x82000067>;
		storage_remove = <0x82000068>;
		storage_in_func = <0x82000023>;
		storage_out_func = <0x82000024>;
		storage_block_func = <0x82000025>;
		storage_size_func = <0x82000027>;
		storage_set_enctype = <0x8200006A>;
		storage_get_enctype = <0x8200006B>;
		storage_version = <0x8200006C>;
	};

	cpu_iomap{
		compatible = "amlogic, iomap";
		#address-cells=<2>;
		#size-cells=<2>;
		ranges;
		io_cbus_base{
			reg = <0x0 0xc1100000 0x0 0x100000>;
		};
		io_apb_base{
			reg = <0x0 0xd0050000 0x0 0x50000>;
		};
		io_aobus_base{
			reg = <0x0 0xc8100000 0x0 0x100000>;
		};
		io_vapb_base{
			reg = <0x0 0xd0100000 0x0 0x100000>;
		};
		io_hiu_base{
			reg = <0x0 0xc883c000 0x0 0x2000>;
		};
	};

	cpu_info{
		compatible = "amlogic, cpuinfo";
		cpuinfo_cmd = <0x82000044>;
		status = "okay";
	};

	watchdog {
		compatible = "amlogic, meson-wdt";
		status = "okay";
		default_timeout=<10>;
		reset_watchdog_method=<1>; /* 0:sysfs,1:kernel */
		reset_watchdog_time=<2>;
		shutdown_timeout=<10>;
		firmware_timeout=<6>;
		suspend_timeout=<6>;
		reg = <0x0 0xc11098d0 0x0 0x10>;
		clock-names = "xtal";
		clocks = <&xtal>;
	};

	ram-dump {
		compatible = "amlogic, ram_dump";
		status = "okay";
		reg = <0x0 0xC88345E0 0x0 4>;
		reg-names = "PREG_STICKY_REG8";
	};

	jtag {
		compatible = "amlogic, jtag";
		status = "okay";
		select = "disable"; /* disable/apao/apee */
		/* both sets of jtags for the GXL platform */
		/* are in the ee domain, this is named apao */
		/* just to match the jtag driver */
		pinctrl-names="jtag_apao_pins", "jtag_apee_pins";
		pinctrl-0=<&jtag_a_pins>;
		pinctrl-1=<&jtag_b_pins>;
	};

	mailbox: mhu@c883c400 {
		compatible = "amlogic, meson_mhu";
		reg = <0x0 0xc883c400 0x0 0x4c>,   /* MHU registers */
		      <0x0 0xc8013000 0x0 0x800>;   /* Payload area */
		interrupts = <0 209 1>,   /* low priority interrupt */
			     <0 210 1>;   /* high priority interrupt */
		#mbox-cells = <1>;
		mbox-names = "cpu_to_scp_low", "cpu_to_scp_high";
		mboxes = <&mailbox 0 &mailbox 1>;
	};

	scpi_clocks {
		compatible = "arm, scpi-clks";

		scpi_dvfs: scpi_clocks@0 {
			compatible = "arm, scpi-clk-indexed";
			#clock-cells = <1>;
			clock-indices = <0>;
			clock-output-names = "vcpu";
		};

	};

	xtal: xtal-clk {
		compatible = "fixed-clock";
		clock-frequency = <24000000>;
		clock-output-names = "xtal";
		#clock-cells = <0>;
	};

	vpu {
		compatible = "amlogic, vpu-gxl";
		dev_name = "vpu";
		status = "okay";
		clocks = <&clkc CLKID_VAPB_MUX>,
			<&clkc CLKID_VPU_INTR>,
			<&clkc CLKID_GP0_PLL>,
			<&clkc CLKID_VPU_P0_COMP>,
			<&clkc CLKID_VPU_P1_COMP>,
			<&clkc CLKID_VPU_MUX>;
		clock-names = "vapb_clk",
			"vpu_intr_gate",
			"gp_pll",
			"vpu_clk0",
			"vpu_clk1",
			"vpu_clk";
		clk_level = <7>;
		/* 0: 100.0M    1: 166.7M    2: 200.0M    3: 250.0M */
		/* 4: 333.3M    5: 400.0M    6: 500.0M    7: 666.7M */
	};

	spicc:@c1108d80{
		compatible = "amlogic, spicc";
		status = "disabled";
		reg = <0x0 0xc1108d80 0x0 0x28>;
		clocks = <&clkc CLKID_SPICC>;
		clock-names = "spicc_clk";
		interrupts = <0 81 1>;
		device_id = <0>;
	};

	uart_AO: serial@c81004c0 {
		compatible = "amlogic, meson-uart";
		reg = <0x0 0xc81004c0 0x0 0x18>;
		interrupts = <0 193 1>;
		status = "okay";
		clocks = <&xtal>;
		clock-names = "clk_uart";
		xtal_tick_en = <1>;
		fifosize = < 64 >;
		pinctrl-names = "default";
		/*pinctrl-0 = <&ao_uart_pins>;*/
		support-sysrq = <0>;	/* 0 not support , 1 support */
	};

	uart_A: serial@c11084c0 {
		compatible = "amlogic, meson-uart";
		reg = <0x0 0xc11084c0 0x0 0x18>;
		interrupts = <0 26 1>;
		status = "okay";
		clocks = <&clkc CLKID_UART0>;
		clock-names = "clk_uart";
		fifosize = < 128 >;
		pinctrl-names = "default";
		pinctrl-0 = <&a_uart_pins>;
	};

	uart_B: serial@c11084dc {
		compatible = "amlogic, meson-uart";
		reg = <0x0 0xc11084dc 0x0 0x18>;
		interrupts = <0 75 1>;
		status = "disabled";
		clocks = <&clkc CLKID_UART1>;
		clock-names = "clk_uart";
		fifosize = < 64 >;
		pinctrl-names = "default";
		pinctrl-0 = <&b_uart_pins>;
	};

	uart_C: serial@c1108700 {
		compatible = "amlogic, meson-uart";
		reg = <0x0 0xc1108700 0x0 0x18>;
		interrupts = <0 93 1>;
		status = "disabled";
		clocks = <&clkc CLKID_UART2>;
		clock-names = "clk_uart";
		fifosize = < 64 >;
		pinctrl-names = "default";
		pinctrl-0 = <&c_uart_pins>;
	};

	uart_AO_B: serial@c81004e0 {
		compatible = "amlogic, meson-uart";
		reg = <0x0 0xc81004e0 0x0 0x18>;
		interrupts = <0 197 1>;
		status = "disable";
		clocks = <&xtal>;
		clock-names = "clk_uart";
		fifosize = < 64 >;
		pinctrl-names = "default";
		pinctrl-0 = <&ao_b_uart_pins>;
	};

	pinctrl_aobus: pinctrl@14 {
		compatible = "amlogic,meson-gxl-aobus-pinctrl";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		gpio_ao: bank@14 {
			reg = <0x0 0xc8100014 0x0 0x8>,
			      <0x0 0xc810002c 0x0 0x4>,
			      <0x0 0xc8100024 0x0 0x8>;
			reg-names = "mux", "pull", "gpio";
			gpio-controller;
			#gpio-cells = <2>;
		};
	};

	pinctrl_periphs: pinctrl@4b0 {
		compatible = "amlogic,meson-gxl-periphs-pinctrl";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		gpio: bank@4b0 {
			reg = <0x0 0xc88344b0 0x0 0x28>,
			      <0x0 0xc88344e8 0x0 0x14>,
			      <0x0 0xc8834520 0x0 0x14>,
			      <0x0 0xc8834430 0x0 0x40>;
			reg-names = "mux", "pull",
				"pull-enable", "gpio";
			gpio-controller;
			#gpio-cells = <2>;
		};
	};

	soc {
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		cbus: cbus@c1100000 {
			compatible = "simple-bus";
			reg = <0x0 0xc1100000 0x0 0x100000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;

			gpio_intc: interrupt-controller@9880 {
				compatible = "amlogic,meson-gpio-intc",
						"amlogic,meson-gxl-gpio-intc";
				reg = <0x0 0x9880 0x0 0x10>;
				interrupt-controller;
				#interrupt-cells = <2>;
				amlogic,channel-interrupts =
					<64 65 66 67 68 69 70 71>;
				status = "okay";
			};

			meson_clk_msr{
				compatible = "amlogic, gxl_measure";
				reg = <0x0 0x875c 0x0 0x4
					0x0 0x8764 0x0 0x4>;
			};

			/*i2c-A*/
			i2c0: i2c@8500 {
				compatible = "amlogic,meson-gx-i2c";
				status = "disabled";
				reg = <0x0 0x8500 0x0 0x20>;
				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
					<GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
				#address-cells = <1>;
				#size-cells = <0>;
				clocks = <&clkc CLKID_I2C>;
				clock-names = "clk_i2c";
			};

			/*i2c-B*/
			i2c1: i2c@87c0 {
				compatible = "amlogic,meson-gx-i2c";
				status = "disabled";
				reg = <0x0 0x87c0 0x0 0x20>;
				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>,
					<GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
				#address-cells = <1>;
				#size-cells = <0>;
				clocks = <&clkc CLKID_I2C>;
				clock-names = "clk_i2c";
			};

			/*i2c-C*/
			i2c2: i2c@87e0 {
				compatible = "amlogic,meson-gx-i2c";
				status = "disabled";
				reg = <0x0 0x87e0 0x0 0x20>;
				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>,
					<GIC_SPI 49 IRQ_TYPE_EDGE_RISING>;
				#address-cells = <1>;
				#size-cells = <0>;
				clocks = <&clkc CLKID_I2C>;
				clock-names = "clk_i2c";
			};

			/*i2c-D*/
			i2c3: i2c@8d20 {
				compatible = "amlogic,meson-gx-i2c";
				status = "disabled";
				reg = <0x0 0x8d20 0x0 0x20>;
				interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
					<GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
				#address-cells = <1>;
				#size-cells = <0>;
				clocks = <&clkc CLKID_I2C>;
				clock-names = "clk_i2c";
			};
		};

		aobus: aobus@c8100000 {
			compatible = "simple-bus";
			reg = <0x0 0xc8100000 0x0 0x100000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;

			cpu_version{
				reg=<0x0 0x0220 0x0 0x4>;
			};

			i2c_AO: i2c@0500 {
				compatible = "amlogic,meson-gx-i2c";
				status = "disabled";
				reg = <0x0 0x0500 0x0 0x20>;
				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
				#address-cells = <1>;
				#size-cells = <0>;
				clocks = <&clkc CLKID_I2C>;
				clock-names = "clk_i2c";
			};

			irblaster: meson-irblaster@c0 {
				compatible = "amlogic, aml_irblaster";
				reg = <0x0 0xc0 0x0 0xc>,
					<0x0 0x40 0x0 0x4>;
				#irblaster-cells = <2>;
				status = "disabled";
			};
		};

		periphs: periphs@c8834000 {
			compatible = "simple-bus";
			reg = <0x0 0xc8834000 0x0 0x2000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
		};

		hiubus: hiubus@c883c000 {
			compatible = "simple-bus";
			reg = <0x0 0xc883c000 0x0 0x2000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;

			clkc: clock-controller@0 {
				compatible = "amlogic,gxl-clkc";
				#clock-cells = <1>;
				reg = <0x0 0x0 0x0 0x3db>;
			};
		};

		apb: apb@d0000000 {
			compatible = "simple-bus";
			reg = <0x0 0xd0000000 0x0 0x200000>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
		};
	}; /* end of soc */

	cpu_ver_name {
		compatible = "amlogic, cpu-major-id-gxl";
	};

	vdac {
		compatible = "amlogic, vdac-gxl";
		status = "okay";
	};

	defendkey: defendkey {
		compatible = "amlogic, defendkey";
		reg = <0x0 0xc8834500 0x0 0x4>; /*RNG_USR_DATA*/
		mem_size = <0x0 0x100000>;
		status = "okay";
	};
}; /* end of root */

&pinctrl_aobus {
	remote_pins:remote_pin {
		mux {
			groups = "remote_input";
			function = "remote";
		};
	};

	sd_to_ao_uart_clr_pins:sd_to_ao_uart_clr_pins {
		mux {
			groups = "GPIOAO_0",
					"GPIOAO_1";
			function = "gpio_aobus";
		};
	};

	sd_to_ao_uart_pins:sd_to_ao_uart_pins {
		mux {
			groups = "uart_tx_ao_a_0",
					"uart_rx_ao_a_0";
			function = "uart_ao";
			bias-pull-up;
			input-enable;
		};
	};

	ao_uart_pins:ao_uart {
		mux {
			groups = "uart_tx_ao_a_0",
				"uart_rx_ao_a_0";
			function = "uart_ao";
		};
	};

	ao_b_uart_pins:ao_b_uart {
		mux {
			groups = "uart_tx_ao_b_0",
					"uart_rx_ao_b_0";
			function = "uart_ao_b";
		};
	};
	ao_i2c_master:ao_i2c{
		mux {
			groups = "i2c_sda_ao",
				"i2c_sck_ao";
			function = "i2c_ao";
		};
	};

	hdmitx_aocec: hdmitx_aocec {
		mux {
			groups = "ao_cec";
			function = "ao_cec";
		};
	};

	hdmitx_eecec: hdmitx_eecec {
		mux {
			groups = "ee_cec";
			function = "ee_cec";
		};
	};

	irblaster_pins:irblaster_pin {
		mux {
			groups = "ir_out_ao7";
			function = "ir_out";
		};
	};

	irblaster_pins1:irblaster_pin1 {
		mux {
			groups = "ir_out_ao9";
			function = "ir_out";
		};
	};
}; /* end of pinctrl_aobus*/

&pinctrl_periphs {
	external_eth_pins:external_eth_pins {
		mux {
			groups = "eth_mdio",
				"eth_mdc",
				"eth_clk_rx_clk",
				"eth_rx_dv",
				"eth_rxd0",
				"eth_rxd1",
				"eth_rxd2",
				"eth_rxd3",
				"eth_rgmii_tx_clk",
				"eth_tx_en",
				"eth_txd0",
				"eth_txd1",
				"eth_txd2",
				"eth_txd3";
			function = "eth";
		};
	};

	jtag_a_pins:jtag_a_pin {
		mux {
			groups = "GPIOH_6",
				"GPIOH_7",
				"GPIOH_8",
				"GPIOH_9";
			function = "gpio_periphs";
		};
	};

	jtag_b_pins:jtag_b_pin {
		mux {
			groups = "CARD_0",
				"CARD_1",
				"CARD_2",
				"CARD_3";
			function = "gpio_periphs";
		};
	};

	a_uart_pins:a_uart {
		mux {
			groups = "uart_tx_a",
				"uart_rx_a",
				"uart_cts_a",
				"uart_rts_a";
			function = "uart_a";
		};
	};

	b_uart_pins:b_uart {
		mux {
			groups = "uart_tx_b",
				"uart_rx_b",
				"uart_cts_b",
				"uart_rts_b";
			function = "uart_b";
		};
	};

	c_uart_pins:c_uart {
		mux {
			groups = "uart_tx_c",
				"uart_rx_c",
				"uart_cts_c",
				"uart_rts_c";
			function = "uart_c";
		};
	};

	wifi_32k_pins:wifi_32k_pins {
		mux {
			groups ="pwm_e";
			function = "pwm_e";
		};
	};

/*
* sd_clk_cmd_pins:sd_clk_cmd_pins{
* };
* sd_all_pins:sd_all_pins {
*  };
* sd_1bit_uart_pins:sd_1bit_uart_pins{
*  };
*  sd_clk_cmd_uart_pins:sd_clk_cmd_uart_pins {
* };
* sd_to_ao_jtag_pins:sd_to_ao_jtag_pins{
* };
*/
	ao_to_sd_uart_clr_pins:ao_to_sd_uart_clr_pins {
		mux {
			groups = "sdcard_d2",
					"sdcard_d3";
			function = "sdcard";
			input-enable;
			bias-pull-up;
		};
	};

	sd_1bit_pins:sd_1bit_pins {
		mux {
			groups = "sdcard_d0",
					"sdcard_cmd",
					"sdcard_clk";
			function = "sdcard";
			input-enable;
			bias-pull-up;
		};
	};

	ao_to_sd_uart_pins:ao_to_sd_uart_pins {
		mux {
			groups = "uart_tx_ao_a_card4",
					"uart_rx_ao_a_card5";
			function = "uart_ao_a_card";
			bias-pull-up;
			input-enable;
		};
	};

	emmc_clk_cmd_pins:emmc_clk_cmd_pins {
		mux {
			groups = "emmc_cmd",
				"emmc_clk";
			function = "emmc";
			input-enable;
			bias-pull-up;
		};
	};


	emmc_conf_pull_up:emmc_conf_pull_up {
		mux {
			groups = "emmc_nand_d07",
				"emmc_clk",
				"emmc_cmd";
			function = "emmc";
			input-enable;
			bias-pull-up;
		};
	};

	emmc_conf_pull_done:emmc_conf_pull_done {
		mux {
			groups = "emmc_ds";
			function = "emmc";
			input-enable;
			bias-pull-down;
		};
	};

	sd_clk_cmd_pins:sd_clk_cmd_pins{
		mux {
			groups = "sdcard_cmd",
				"sdcard_clk";
			function = "sdcard";
			input-enable;
			bias-pull-up;
		};
	};

	sd_all_pins:sd_all_pins{
		mux {
			groups = "sdcard_d0",
				"sdcard_d1",
				"sdcard_d2",
				"sdcard_d3",
				"sdcard_cmd",
				"sdcard_clk";
			function = "sdcard";
			input-enable;
			bias-pull-up;
		};
	};

	sdio_clk_cmd_pins:sdio_clk_cmd_pins {
		mux {
			groups = "sdio_clk",
				"sdio_cmd";
			function = "sdio";
			input-enable;
			bias-pull-up;
		};
	};

	sdio_all_pins:sdio_all_pins {
		mux {
			groups = "sdio_d0",
				"sdio_d1",
				"sdio_d2",
				"sdio_d3",
				"sdio_clk",
				"sdio_cmd";
			function = "sdio";
			input-enable;
			bias-pull-up;
		};
	};

	sd_iso7816_pins:sd_iso7816_pins {
		mux {
			groups = "iso7816_clk_dv",
				"iso7816_data_dv";
			function = "iso7816";
			input-enable;
			bias-pull-down;
		};
	};

	nand_pulldown: nand_pulldown {
		mux {
			groups = "emmc_nand_d07",
				"emmc_ds";
			function = "emmc";
			bias-pull-down;
		};
	};

	nand_pullup: nand_pullup {
		mux {
			groups = "emmc_clk",
				"emmc_cmd";
			function = "emmc";
			bias-pull-up;
		};
	};

	all_nand_pins: all_nand_pins {
		mux {
			groups = "emmc_nand_d07",
				"nand_ce0",
				"nand_ce1",
				"nand_rb0",
				"nand_ale",
				"nand_cle",
				"nand_wen_clk",
				"nand_ren_wr",
				"nand_dqs";
			function = "nand";
			input-enable;
		};
	};

	nand_cs_pins: nand_cs {
		mux {
			groups = "nand_ce0",
				"nand_ce1";
			function = "nand";
		};
	};

	hdmitx_hpd: hdmitx_hpd {
		mux {
			groups = "hdmi_hpd";
			function = "hdmi_hpd";
		};
	};

	hdmitx_ddc: hdmitx_ddc {
		mux {
			groups = "hdmi_sda",
				"hdmi_scl";
			function = "hdmi_ddc";
		};
	};

	a_i2c_master:a_i2c {
		mux {
			groups = "i2c_sda_a",
				"i2c_scl_a";
			function = "i2c_a";
		};
	};

	b_i2c_master:b_i2c {
		mux {
			groups = "i2c_sda_b",
				"i2c_scl_b";
			function = "i2c_b";
		};
	};

	/* c_i2c_master:	  dv28 dv29 */
	/* c_i2c_master_pin1: dv18 dv19 */
	c_i2c_master:c_i2c {
		mux {
			groups = "i2c_sda_c_dv28",
				"i2c_scl_c_dv29";
			function = "i2c_c";
		};
	};
	c_i2c_master_pin1:c_i2c_pin1{
		mux {
			groups = "i2c_sda_c_dv18",
				"i2c_scl_c_dv19";
			function = "i2c_c";
		};
	};

	d_i2c_master:d_i2c {
		mux {
		groups = "i2c_sda_d",
			"i2c_scl_d";
		function = "i2c_d";
		};
	};

	spicc_pulldown_z11z12z13: spicc_pulldown_z11z12z13 {
		mux {
			groups = "spi_sclk_0",
				"spi_miso_0",
				"spi_mosi_0";
			function = "spi";
		};
	};

	spicc_pullup_z11z12z13: spicc_pullup_z11z12z13 {
		mux {
			groups = "spi_sclk_0",
				"spi_miso_0",
				"spi_mosi_0";
			function = "spi";
		};
	};

	spicc_pulldown_x8x9x11: spicc_pulldown_x8x9x11 {
		mux {
			groups = "spi_sclk_1",
				"spi_miso_1",
				"spi_mosi_1";
			function = "spi";
			bias-pull-down;
		};
	};

	spicc_pullup_x8x9x11: spicc_pullup_x8x9x11 {
		mux {
			groups = "spi_sclk_1",
				"spi_miso_1",
				"spi_mosi_1";
			function = "spi";
			bias-pull-up;
		};
	};

	audio_i2s_pins:audio_i2s {
		mux {
			groups = "i2s_am_clk",
				"i2s_ao_clk_out",
				"i2s_lr_clk_out",
				"i2sout_ch01";
			function = "i2s";
		};
	};

	audio_spdif_pins:audio_spdif {
		mux {
			groups = "spdif_out";
			function = "spdif_out";
		};
	};

	audio_spdif_in_pins:audio_spdif_in {
		mux {
			groups = "spdif_in_z14";
			function = "spdif_in";
		};
	};

	audio_spdif_in_1_pins:audio_spdif_in_1 {
		mux {
			groups = "spdif_in_h4";
			function = "spdif_in";
		};
	};

	audio_pcm_pins:audio_pcm {
		mux {
			groups = "pcm_out_a",
				"pcm_in_a",
				"pcm_fs_a",
				"pcm_clk_a";
			function = "pcm_a";
		};
	};
	aml_dmic_pins:audio_dmic {
		mux {
			groups = "dmic_in_dv24",
					"dmic_clk_dv25";
			function = "dmic";
		};
	};
	dvb_p_ts0_pins: dvb_p_ts0_pins {
			tsin_a {
				groups = "tsin_sop_a_dv9",
				"tsin_d_valid_a_dv10",
				"tsin_d0_a_dv0",
				"tsin_d1_7_a_dv1_7",
				"tsin_clk_a_dv8";
				function = "tsin_a";
			};
		};
	dvb_s_ts0_pins: dvb_s_ts0_pins {
			tsin_a {
				groups = "tsin_sop_a_dv9",
					"tsin_d_valid_a_dv10",
					"tsin_clk_a_dv8",
					"tsin_d0_a_dv0";
				function = "tsin_a";
			};
		};

	lcd_ttl_rgb_6bit_on_pins:lcd_ttl_rgb_6bit_on{
		mux {
			groups = "lcd_r2_7",
				"lcd_g2_7",
				"lcd_b2_7";
			function = "lcd_ttl";
		};
	};
	lcd_ttl_rgb_6bit_off_pins:lcd_ttl_rgb_6bit_off{
		mux {
			groups = "GPIODV_2","GPIODV_3","GPIODV_4",
				"GPIODV_5","GPIODV_6","GPIODV_7",
				"GPIODV_10","GPIODV_11","GPIODV_12",
				"GPIODV_13","GPIODV_14","GPIODV_15",
				"GPIODV_18","GPIODV_19","GPIODV_20",
				"GPIODV_21","GPIODV_22","GPIODV_23";
			function = "gpio_periphs";
			input-enable;
		};
	};

	lcd_ttl_rgb_8bit_on_pins:lcd_ttl_rgb_8bit_on{
		mux {
			groups = "lcd_r0_1", "lcd_r2_7",
				"lcd_g0_1", "lcd_g2_7",
				"lcd_b0_1", "lcd_b2_7";
			function = "lcd_ttl";
		};
	};
	lcd_ttl_rgb_8bit_off_pins:lcd_ttl_rgb_8bit_off{
		mux {
			groups = "GPIODV_0","GPIODV_1","GPIODV_2","GPIODV_3",
				"GPIODV_4","GPIODV_5","GPIODV_6","GPIODV_7",
				"GPIODV_8","GPIODV_9","GPIODV_10","GPIODV_11",
				"GPIODV_12","GPIODV_13","GPIODV_14","GPIODV_15",
				"GPIODV_16","GPIODV_17","GPIODV_18","GPIODV_19",
				"GPIODV_20","GPIODV_21","GPIODV_22","GPIODV_23";
			function = "gpio_periphs";
			input-enable;
		};
	};
		 /* DE + clk */
	lcd_ttl_de_on_pins:lcd_ttl_de_on_pin{
		mux {
			groups = "tcon_cph", /* clk */
				"tcon_oeh";  /* DE */
			function = "lcd_ttl";
		};
	};
		 /* hvsync + clk */
	lcd_ttl_hvsync_on_pins:lcd_ttl_hvsync_on_pin{
		mux {
			groups = "tcon_cph", /* clk */
				"tcon_stv1", /* vs */
				"tcon_sth1"; /* hs */
			function = "lcd_ttl";
		};
	};
		 /* DE + hvsync + clk */
	lcd_ttl_de_hvsync_on_pins:lcd_ttl_de_hvsync_on_pin{
		mux {
			groups = "tcon_cph", /* clk */
				"tcon_oeh",  /* DE */
				"tcon_stv1", /* vs */
				"tcon_sth1"; /* hs */
			function = "lcd_ttl";
		};
	};
	lcd_ttl_de_hvsync_off_pins:lcd_ttl_de_hvsync_off_pin{
		mux {
			groups = "GPIODV_26", /* clk */
				"GPIODV_27",  /* DE */
				"GPIODV_24", /* vs */
				"GPIODV_25"; /* hs */
			function = "gpio_periphs";
			input-enable;
		};
	};
}; /* end of pinctrl_periphs */

&periphs {
	rng {
		compatible = "amlogic,meson-rng";
		reg = <0x0 0x0 0x0 0x4>;
		quality = /bits/ 16 <1000>;
	};
};

&cbus{
	reset: reset-controller@4404 {
		compatible = "amlogic,reset";
		reg = <0x0 0x04404 0x0 0x20>;
		#reset-cells = <1>;
	};
};

/{
	aml_dma {
		compatible = "amlogic,aml_gxl_dma";
		reg = <0x0 0xc883e000 0x0 0x28>;
		interrupts = <0 188 1>;

		aml_aes {
			compatible = "amlogic,aes_dma";
			dev_name = "aml_aes_dma";
			status = "okay";
		};

		aml_tdes {
			compatible = "amlogic,des_dma,tdes_dma";
			dev_name = "aml_tdes_dma";
			status = "okay";
		};
	};

	audio_data:audio_data {
	   compatible = "amlogic, audio_data";
	   query_licence_cmd = <0x82000050>;
	   status = "disabled";
	};

	saradc: saradc {
		compatible = "amlogic,meson-gxl-saradc";
		status = "okay";
		#io-channel-cells = <1>;
		clocks = <&xtal>, <&clkc CLKID_SARADC>,
				<&clkc CLKID_SARADC_COMP>;
		clock-names = "xtal", "clk81_gate", "saradc_clk";
		interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
		reg = <0x0 0xc1108680 0x0 0x38>;
	};

	efuse: efuse{
		compatible = "amlogic, efuse";
		read_cmd = <0x82000030>;
		write_cmd = <0x82000031>;
		get_max_cmd = <0x82000033>;
		key = <&efusekey>;
		clocks = <&clkc CLKID_EFUSE>;
		clock-names = "efuse_clk";
		status = "disabled";
	};

	efusekey:efusekey{
		keynum = <4>;
		key0 = <&key_0>;
		key1 = <&key_1>;
		key2 = <&key_2>;
		key3 = <&key_3>;
		key_0:key_0{
			keyname = "mac";
			offset = <0>;
			size = <6>;
		};
		key_1:key_1{
			keyname = "mac_bt";
			offset = <6>;
			size = <6>;
		};
		key_2:key_2{
			keyname = "mac_wifi";
			offset = <12>;
			size = <6>;
		};
		key_3:key_3{
			keyname = "usid";
			offset = <18>;
			size = <16>;
		};
	};

	remote:rc@c8100580 {
		compatible = "amlogic, aml_remote";
		dev_name = "meson-remote";
		reg = <0x0 0xc8100580 0x00 0x44>, /*Multi-format IR controller*/
			<0x0 0xc8100480 0x00 0x20>; /*Legacy IR controller*/
		status = "okay";
		protocol = <REMOTE_TYPE_NEC>;
		interrupts = <0 196 1>;
		pinctrl-names = "default";
		pinctrl-0 = <&remote_pins>;
		map = <&custom_maps>;
		max_frame_time = <200>; /*set software decoder max frame time*/
	};

	custom_maps:custom_maps {
		mapnum = <3>;
		map0 = <&map_0>;
		map1 = <&map_1>;
		map2 = <&map_2>;
		map_0: map_0{
			mapname = "amlogic-remote-1";
			customcode = <0xfb04>;
			release_delay = <80>;
			size  = <50>;   /*keymap size*/
			keymap = <REMOTE_KEY(0x47, KEY_0)
				REMOTE_KEY(0x13, KEY_1)
				REMOTE_KEY(0x10, KEY_2)
				REMOTE_KEY(0x11, KEY_3)
				REMOTE_KEY(0x0F, KEY_4)
				REMOTE_KEY(0x0C, KEY_5)
				REMOTE_KEY(0x0D, KEY_6)
				REMOTE_KEY(0x0B, KEY_7)
				REMOTE_KEY(0x08, KEY_8)
				REMOTE_KEY(0x09, KEY_9)
				REMOTE_KEY(0x5C, KEY_RIGHTCTRL)
				REMOTE_KEY(0x51, KEY_F3)
				REMOTE_KEY(0x50, KEY_F4)
				REMOTE_KEY(0x40, KEY_F5)
				REMOTE_KEY(0x4d, KEY_F6)
				REMOTE_KEY(0x43, KEY_F7)
				REMOTE_KEY(0x17, KEY_F8)
				REMOTE_KEY(0x00, KEY_F9)
				REMOTE_KEY(0x01, KEY_F10)
				REMOTE_KEY(0x16, KEY_F11)
				REMOTE_KEY(0x49, KEY_BACKSPACE)
				REMOTE_KEY(0x06, KEY_PROPS)
				REMOTE_KEY(0x14, KEY_UNDO)
				REMOTE_KEY(0x44, KEY_UP)
				REMOTE_KEY(0x1D, KEY_DOWN)
				REMOTE_KEY(0x1C, KEY_LEFT)
				REMOTE_KEY(0x48, KEY_RIGHT)
				REMOTE_KEY(0x53, KEY_LEFTMETA)
				REMOTE_KEY(0x45, KEY_PAGEUP)
				REMOTE_KEY(0x19, KEY_PAGEDOWN)
				REMOTE_KEY(0x52, KEY_PAUSE)
				REMOTE_KEY(0x05, KEY_HANGEUL)
				REMOTE_KEY(0x59, KEY_HANJA)
				REMOTE_KEY(0x1b, KEY_SCALE)
				REMOTE_KEY(0x04, KEY_KPCOMMA)
				REMOTE_KEY(0x1A, KEY_POWER)
				REMOTE_KEY(0x0A, KEY_TAB)
				REMOTE_KEY(0x0e, KEY_MUTE)
				REMOTE_KEY(0x1F, KEY_HOME)
				REMOTE_KEY(0x1e, KEY_FRONT)
				REMOTE_KEY(0x07, KEY_COPY)
				REMOTE_KEY(0x12, KEY_OPEN)
				REMOTE_KEY(0x54, KEY_PASTE)
				REMOTE_KEY(0x02, KEY_FIND)
				REMOTE_KEY(0x4f, KEY_A)
				REMOTE_KEY(0x42, KEY_B)
				REMOTE_KEY(0x5d, KEY_C)
				REMOTE_KEY(0x4c, KEY_D)
				REMOTE_KEY(0x58, KEY_CUT)
				REMOTE_KEY(0x55, KEY_CALC)>;
		};
		map_1: map_1{
			mapname = "amlogic-remote-2";
			customcode = <0xfe01>;
			release_delay = <80>;
			size  = <53>;
			keymap = <REMOTE_KEY(0x01, KEY_1)
				REMOTE_KEY(0x02, KEY_2)
				REMOTE_KEY(0x03, KEY_3)
				REMOTE_KEY(0x04, KEY_4)
				REMOTE_KEY(0x05, KEY_5)
				REMOTE_KEY(0x06, KEY_6)
				REMOTE_KEY(0x07, KEY_7)
				REMOTE_KEY(0x08, KEY_8)
				REMOTE_KEY(0x09, KEY_9)
				REMOTE_KEY(0x0a, KEY_0)
				REMOTE_KEY(0x1F, KEY_FN_F1)
				REMOTE_KEY(0x15, KEY_MENU)
				REMOTE_KEY(0x16, KEY_TAB)
				REMOTE_KEY(0x0c, KEY_CHANNELUP)
				REMOTE_KEY(0x0d, KEY_CHANNELDOWN)
				REMOTE_KEY(0x0e, KEY_VOLUMEUP)
				REMOTE_KEY(0x0f, KEY_VOLUMEDOWN)
				REMOTE_KEY(0x11, KEY_HOME)
				REMOTE_KEY(0x1c, KEY_RIGHT)
				REMOTE_KEY(0x1b, KEY_LEFT)
				REMOTE_KEY(0x19, KEY_UP)
				REMOTE_KEY(0x1a, KEY_DOWN)
				REMOTE_KEY(0x1d, KEY_ENTER)
				REMOTE_KEY(0x17, KEY_MUTE)
				REMOTE_KEY(0x49, KEY_FINANCE)
				REMOTE_KEY(0x43, KEY_BACK)
				REMOTE_KEY(0x12, KEY_FN_F4)
				REMOTE_KEY(0x14, KEY_FN_F5)
				REMOTE_KEY(0x18, KEY_FN_F6)
				REMOTE_KEY(0x59, KEY_INFO)
				REMOTE_KEY(0x5a, KEY_STOPCD)
				REMOTE_KEY(0x10, KEY_POWER)
				REMOTE_KEY(0x42, KEY_PREVIOUSSONG)
				REMOTE_KEY(0x44, KEY_NEXTSONG)
				REMOTE_KEY(0x1e, KEY_REWIND)
				REMOTE_KEY(0x4b, KEY_FASTFORWARD)
				REMOTE_KEY(0x58, KEY_PLAYPAUSE)
				REMOTE_KEY(0x46, KEY_PROPS)
				REMOTE_KEY(0x40, KEY_UNDO)
				REMOTE_KEY(0x38, KEY_SCROLLLOCK)
				REMOTE_KEY(0x57, KEY_FN)
				REMOTE_KEY(0x5b, KEY_FN_ESC)
				REMOTE_KEY(0x54, KEY_RED)
				REMOTE_KEY(0x4c, KEY_GREEN)
				REMOTE_KEY(0x4e, KEY_YELLOW)
				REMOTE_KEY(0x55, KEY_BLUE)
				REMOTE_KEY(0x53, KEY_BLUETOOTH)
				REMOTE_KEY(0x52, KEY_WLAN)
				REMOTE_KEY(0x39, KEY_CAMERA)
				REMOTE_KEY(0x41, KEY_SOUND)
				REMOTE_KEY(0x0b, KEY_QUESTION)
				REMOTE_KEY(0x00, KEY_CHAT)
				REMOTE_KEY(0x13, KEY_SEARCH)>;
		};
		map_2: map_2{
			mapname = "amlogic-remote-3";
			customcode = <0xbd02>;
			release_delay = <80>;
			size  = <17>;
			keymap = <REMOTE_KEY(0xca,103)
				REMOTE_KEY(0xd2,108)
				REMOTE_KEY(0x99,105)
				REMOTE_KEY(0xc1,106)
				REMOTE_KEY(0xce,97)
				REMOTE_KEY(0x45,116)
				REMOTE_KEY(0xc5,133)
				REMOTE_KEY(0x80,113)
				REMOTE_KEY(0xd0,15)
				REMOTE_KEY(0xd6,125)
				REMOTE_KEY(0x95,102)
				REMOTE_KEY(0xdd,104)
				REMOTE_KEY(0x8c,109)
				REMOTE_KEY(0x89,131)
				REMOTE_KEY(0x9c,130)
				REMOTE_KEY(0x9a,120)
				REMOTE_KEY(0xcd,121)>;
		};
	};
	aml_reboot{
		compatible = "aml, reboot";
		sys_reset = <0x84000009>;
		sys_poweroff = <0x84000008>;
	};

	rtc{
		compatible = "amlogic, aml_vrtc";
		alarm_reg_addr = <0xc81000a8>;
		timer_e_addr = <0xc1109988>;
		init_date = "2017/01/01";
		status = "okay";
	};

    pwm_ab: pwm@c1108550 {
		compatible = "amlogic,gx-ee-pwm";
		reg = <0x0 0xc1108550 0x0 0x1c>;
		#pwm-cells = <3>;
		clocks = <&xtal>,<&xtal>,<&xtal>,<&xtal>;
		clock-names = "clkin0","clkin1","clkin2","clkin3";
		status = "disabled";
	};
    pwm_cd: pwm@c1108640 {
		compatible = "amlogic,gx-ee-pwm";
		reg = <0x0 0xc1108640 0x0 0x1c>;
		#pwm-cells = <3>;
		clocks = <&xtal>,<&xtal>,<&xtal>,<&xtal>;
		clock-names = "clkin0","clkin1","clkin2","clkin3";
		status = "disabled";
	};
    pwm_ef: pwm@c11086c0 {
		compatible = "amlogic,gx-ee-pwm";
		reg = <0x0 0xc11086c0 0x0 0x1c>;
		#pwm-cells = <3>;
		clocks = <&xtal>,<&xtal>,<&xtal>,<&xtal>;
		clock-names = "clkin0","clkin1","clkin2","clkin3";
		status = "disabled";
	};
    pwm_aoab: pwm@c8100550 {
		compatible = "amlogic,gx-ao-pwm";
		reg = <0x0 0xc8100550 0x0 0x1c>;
		#pwm-cells = <3>;
		clocks = <&xtal>,<&xtal>,<&xtal>,<&xtal>;
		clock-names = "clkin0","clkin1","clkin2","clkin3";
		status = "disabled";
	};
	ddr_bandwidth {
		compatible = "amlogic, ddr-bandwidth";
		status = "okay";
		reg = <0x0 0xc8838000 0x0 0x100
		       0x0 0xc8837000 0x0 0x100>;
		interrupts = <0 52 1>;
		interrupt-names = "ddr_bandwidth";
	};
	dmc_monitor {
		compatible = "amlogic, dmc_monitor";
		status = "okay";
		reg_base = <0xda838400>;
		interrupts = <0 51 1>;
	};
};

&gpu{
	/*gpu max freq is 750M*/
	tbl = <&clk125_cfg &clk285_cfg &clk400_cfg
		   &clk500_cfg &clk666_cfg &clk750_cfg &clk750_cfg>;
};