// SPDX-License-Identifier: GPL-2.0
/*
 * The driver-specific portions of the driver model
 *
 * Copyright (c) 2001-2003 Patrick Mochel <mochel@osdl.org>
 * Copyright (c) 2004-2009 Greg Kroah-Hartman <gregkh@suse.de>
 * Copyright (c) 2008-2009 Novell Inc.
 * Copyright (c) 2012-2019 Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 * Copyright (c) 2012-2019 Linux Foundation
 *
 * See Documentation/driver-api/driver-model/ for more information.
 */

#ifndef _DEVICE_DRIVER_H_
#define _DEVICE_DRIVER_H_

#include <linux/kobject.h>
#include <linux/klist.h>
#include <linux/pm.h>
#include <linux/device/bus.h>
#include <linux/module.h>

/**
 * enum probe_type - device driver probe type to try
 *	Device drivers may opt in for special handling of their
 *	respective probe routines. This tells the core what to
 *	expect and prefer.
 *
 * @PROBE_DEFAULT_STRATEGY: Used by drivers that work equally well
 *	whether probed synchronously or asynchronously.
 * @PROBE_PREFER_ASYNCHRONOUS: Drivers for "slow" devices which
 *	probing order is not essential for booting the system may
 *	opt into executing their probes asynchronously.
 * @PROBE_FORCE_SYNCHRONOUS: Use this to annotate drivers that need
 *	their probe routines to run synchronously with driver and
 *	device registration (with the exception of -EPROBE_DEFER
 *	handling - re-probing always ends up being done asynchronously).
 *
 * Note that the end goal is to switch the kernel to use asynchronous
 * probing by default, so annotating drivers with
 * %PROBE_PREFER_ASYNCHRONOUS is a temporary measure that allows us
 * to speed up boot process while we are validating the rest of the
 * drivers.
 */
enum probe_type {
	PROBE_DEFAULT_STRATEGY,
	PROBE_PREFER_ASYNCHRONOUS,
	PROBE_FORCE_SYNCHRONOUS,
};

/**
 * struct device_driver - The basic device driver structure
 * @name:	Name of the device driver.
 * @bus:	The bus which the device of this driver belongs to.
 * @owner:	The module owner.
 * @mod_name:	Used for built-in modules.
 * @suppress_bind_attrs: Disables bind/unbind via sysfs.
 * @probe_type:	Type of the probe (synchronous or asynchronous) to use.
 * @of_match_table: The open firmware table.
 * @acpi_match_table: The ACPI match table.
 * @probe:	Called to query the existence of a specific device,
 *		whether this driver can work with it, and bind the driver
 *		to a specific device.
 * @sync_state:	Called to sync device state to software state after all the
 *		state tracking consumers linked to this device (present at
 *		the time of late_initcall) have successfully bound to a
 *		driver. If the device has no consumers, this function will
 *		be called at late_initcall_sync level. If the device has
 *		consumers that are never bound to a driver, this function
 *		will never get called until they do.
 * @remove:	Called when the device is removed from the system to
 *		unbind a device from this driver.
 * @shutdown:	Called at shut-down time to quiesce the device.
 * @suspend:	Called to put the device to sleep mode. Usually to a
 *		low power state.
 * @resume:	Called to bring a device from sleep mode.
 * @groups:	Default attributes that get created by the driver core
 *		automatically.
 * @dev_groups:	Additional attributes attached to device instance once
 *		it is bound to the driver.
 * @pm:		Power management operations of the device which matched
 *		this driver.
 * @coredump:	Called when sysfs entry is written to. The device driver
 *		is expected to call the dev_coredump API resulting in a
 *		uevent.
 * @p:		Driver core's private data, no one other than the driver
 *		core can touch this.
 *
 * The device driver-model tracks all of the drivers known to the system.
 * The main reason for this tracking is to enable the driver core to match
 * up drivers with new devices. Once drivers are known objects within the
 * system, however, a number of other things become possible. Device drivers
 * can export information and configuration variables that are independent
 * of any specific device.
 */
struct device_driver {
	const char		*name;
	const struct bus_type	*bus;

	struct module		*owner;
	const char		*mod_name;	/* used for built-in modules */

	bool suppress_bind_attrs;	/* disables bind/unbind via sysfs */
	enum probe_type probe_type;

	const struct of_device_id	*of_match_table;
	const struct acpi_device_id	*acpi_match_table;

	int (*probe) (struct device *dev);
	void (*sync_state)(struct device *dev);
	int (*remove) (struct device *dev);
	void (*shutdown) (struct device *dev);
	int (*suspend) (struct device *dev, pm_message_t state);
	int (*resume) (struct device *dev);
	const struct attribute_group **groups;
	const struct attribute_group **dev_groups;

	const struct dev_pm_ops *pm;
	void (*coredump) (struct device *dev);

	struct driver_private *p;

	ANDROID_KABI_RESERVE(1);
	ANDROID_KABI_RESERVE(2);
	ANDROID_KABI_RESERVE(3);
	ANDROID_KABI_RESERVE(4);
};


int __must_check driver_register(struct device_driver *drv);
void driver_unregister(struct device_driver *drv);

struct device_driver *driver_find(const char *name, const struct bus_type *bus);
bool __init driver_probe_done(void);
void wait_for_device_probe(void);
void flush_deferred_probe_now(void);
void __init wait_for_init_devices_probe(void);

/* sysfs interface for exporting driver attributes */

struct driver_attribute {
	struct attribute attr;
	ssize_t (*show)(struct device_driver *driver, char *buf);
	ssize_t (*store)(struct device_driver *driver, const char *buf,
			 size_t count);
};

#define DRIVER_ATTR_RW(_name) \
	struct driver_attribute driver_attr_##_name = __ATTR_RW(_name)
#define DRIVER_ATTR_RO(_name) \
	struct driver_attribute driver_attr_##_name = __ATTR_RO(_name)
#define DRIVER_ATTR_WO(_name) \
	struct driver_attribute driver_attr_##_name = __ATTR_WO(_name)

int __must_check driver_create_file(struct device_driver *driver,
				    const struct driver_attribute *attr);
void driver_remove_file(struct device_driver *driver,
			const struct driver_attribute *attr);

int driver_set_override(struct device *dev, const char **override,
			const char *s, size_t len);
int __must_check driver_for_each_device(struct device_driver *drv, struct device *start,
					void *data, int (*fn)(struct device *dev, void *));
struct device *driver_find_device(struct device_driver *drv,
				  struct device *start, const void *data,
				  int (*match)(struct device *dev, const void *data));

/**
 * driver_find_device_by_name - device iterator for locating a particular device
 * of a specific name.
 * @drv: the driver we're iterating
 * @name: name of the device to match
 */
static inline struct device *driver_find_device_by_name(struct device_driver *drv,
							const char *name)
{
	return driver_find_device(drv, NULL, name, device_match_name);
}

/**
 * driver_find_device_by_of_node- device iterator for locating a particular device
 * by of_node pointer.
 * @drv: the driver we're iterating
 * @np: of_node pointer to match.
 */
static inline struct device *
driver_find_device_by_of_node(struct device_driver *drv,
			      const struct device_node *np)
{
	return driver_find_device(drv, NULL, np, device_match_of_node);
}

/**
 * driver_find_device_by_fwnode- device iterator for locating a particular device
 * by fwnode pointer.
 * @drv: the driver we're iterating
 * @fwnode: fwnode pointer to match.
 */
static inline struct device *
driver_find_device_by_fwnode(struct device_driver *drv,
			     const struct fwnode_handle *fwnode)
{
	return driver_find_device(drv, NULL, fwnode, device_match_fwnode);
}

/**
 * driver_find_device_by_devt- device iterator for locating a particular device
 * by devt.
 * @drv: the driver we're iterating
 * @devt: devt pointer to match.
 */
static inline struct device *driver_find_device_by_devt(struct device_driver *drv,
							dev_t devt)
{
	return driver_find_device(drv, NULL, &devt, device_match_devt);
}

static inline struct device *driver_find_next_device(struct device_driver *drv,
						     struct device *start)
{
	return driver_find_device(drv, start, NULL, device_match_any);
}

#ifdef CONFIG_ACPI
/**
 * driver_find_device_by_acpi_dev : device iterator for locating a particular
 * device matching the ACPI_COMPANION device.
 * @drv: the driver we're iterating
 * @adev: ACPI_COMPANION device to match.
 */
static inline struct device *
driver_find_device_by_acpi_dev(struct device_driver *drv,
			       const struct acpi_device *adev)
{
	return driver_find_device(drv, NULL, adev, device_match_acpi_dev);
}
#else
static inline struct device *
driver_find_device_by_acpi_dev(struct device_driver *drv, const void *adev)
{
	return NULL;
}
#endif

void driver_deferred_probe_add(struct device *dev);
int driver_deferred_probe_check_state(struct device *dev);
void driver_init(void);

/**
 * module_driver() - Helper macro for drivers that don't do anything
 * special in module init/exit. This eliminates a lot of boilerplate.
 * Each module may only use this macro once, and calling it replaces
 * module_init() and module_exit().
 *
 * @__driver: driver name
 * @__register: register function for this driver type
 * @__unregister: unregister function for this driver type
 * @...: Additional arguments to be passed to __register and __unregister.
 *
 * Use this macro to construct bus specific macros for registering
 * drivers, and do not use it on its own.
 */
#define module_driver(__driver, __register, __unregister, ...) \
static int __init __driver##_init(void) \
{ \
	return __register(&(__driver) , ##__VA_ARGS__); \
} \
module_init(__driver##_init); \
static void __exit __driver##_exit(void) \
{ \
	__unregister(&(__driver) , ##__VA_ARGS__); \
} \
module_exit(__driver##_exit);

/**
 * builtin_driver() - Helper macro for drivers that don't do anything
 * special in init and have no exit. This eliminates some boilerplate.
 * Each driver may only use this macro once, and calling it replaces
 * device_initcall (or in some cases, the legacy __initcall).  This is
 * meant to be a direct parallel of module_driver() above but without
 * the __exit stuff that is not used for builtin cases.
 *
 * @__driver: driver name
 * @__register: register function for this driver type
 * @...: Additional arguments to be passed to __register
 *
 * Use this macro to construct bus specific macros for registering
 * drivers, and do not use it on its own.
 */
#define builtin_driver(__driver, __register, ...) \
static int __init __driver##_init(void) \
{ \
	return __register(&(__driver) , ##__VA_ARGS__); \
} \
device_initcall(__driver##_init);

#endif	/* _DEVICE_DRIVER_H_ */