#!/bin/bash
#
# Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
#
# This file is part of the lvm2-cluster package.
#
# This copyrighted material is made available to anyone wishing to use,
# modify, copy, or redistribute it subject to the terms and conditions
# of the GNU General Public License v.2.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

#
# Edit an lvm.conf file to adjust various properties
#

function usage
{
    echo "usage: $0 <command>"
    echo ""
    echo "Commands:"
    echo "Enable clvm:  --enable-cluster [--lockinglibdir <dir>] [--lockinglib <lib>]"
    echo "Disable clvm: --disable-cluster"
    echo "Set locking library: --lockinglibdir <dir> [--lockinglib <lib>]"
    echo ""
    echo "Global options:"
    echo "Config file location: --file <configfile>"
    echo ""
}


function parse_args
{
    while [ -n "$1" ]; do
        case $1 in
            --enable-cluster)
                LOCKING_TYPE=2
                shift
                ;;
            --disable-cluster)
                LOCKING_TYPE=1
                shift
                ;;
            --lockinglibdir)
                if [ -n "$2" ]; then
                    LOCKINGLIBDIR=$2
                    shift 2
                else
                    usage
                    exit 1
                fi
                ;;
            --lockinglib)
                if [ -n "$2" ]; then
                    LOCKINGLIB=$2
                    shift 2
                else
                    usage
                    exit 1
                fi
                ;;
            --file)
                if [ -n "$2" ]; then
                    CONFIGFILE=$2
                    shift 2
                else
                    usage
                    exit 1
                fi
                ;;
            *)
                usage
                exit 1
        esac
    done
}

function validate_args
{
    [ -z "$CONFIGFILE" ] && CONFIGFILE="/etc/lvm/lvm.conf"

    if [ ! -f "$CONFIGFILE" ]
            then
            echo "$CONFIGFILE does not exist"
            exit 10
    fi

    if [ -z "$LOCKING_TYPE" ] && [ -z "$LOCKINGLIBDIR" ]; then
        usage
        exit 1
    fi

    if [ -n "$LOCKINGLIBDIR" ]; then

        [ -z "$LOCKINGLIB" ] && LOCKINGLIB="liblvm2clusterlock.so"
            
        if [ "${LOCKINGLIBDIR:0:1}" != "/" ]
            then
            echo "Prefix must be an absolute path name (starting with a /)"
            exit 12
        fi
    
        if [ ! -f "$LOCKINGLIBDIR/$LOCKINGLIB" ]
            then
            echo "$LOCKINGLIBDIR/$LOCKINGLIB does not exist, did you do a \"make install\" ?"
            exit 11
        fi
        
    fi

    if [ "$LOCKING_TYPE" = "1" ] && [ -n "$LOCKINGLIBDIR" -o -n "$LOCKINGLIB" ]; then
	echo "Superfluous locking lib parameter, ignoring"
    fi
}

umask 0077

parse_args "$@"

validate_args


SCRIPTFILE=/etc/lvm/.lvmconf-script.tmp
TMPFILE=/etc/lvm/.lvmconf-tmp.tmp


# Flags so we know which parts of the file we can replace and which need
# adding. These are return codes from grep, so zero means it IS present!
have_type=1
have_dir=1
have_library=1
have_global=1

grep -q '^[[:blank:]]*locking_type[[:blank:]]*=' $CONFIGFILE
have_type=$?

grep -q '^[[:blank:]]*library_dir[[:blank:]]*=' $CONFIGFILE
have_dir=$?

grep -q '^[[:blank:]]*locking_library[[:blank:]]*=' $CONFIGFILE
have_library=$?

# Those options are in section "global {" so we must have one if any are present.
if [ "$have_type" = "0" -o "$have_dir" = "0" -o "$have_library" = "0" ]
then

    # See if we can find it...
    grep -q '^[[:blank:]]*global[[:blank:]]*{' $CONFIGFILE
    have_global=$?
    
    if [ "$have_global" = "1" ] 
	then
	echo "global keys but no 'global {' found, can't edit file"
	exit 13
    fi
fi

if [ "$LOCKING_TYPE" = "2" ] && [ -z "$LOCKINGLIBDIR" ] && [ "$have_dir" = "1" ]; then
	echo "no library_dir specified in $CONFIGFILE"
	exit 16
fi

# So if we don't have "global {" we need to create one and 
# populate it

if [ "$have_global" = "1" ]
then
    if [ -z "$LOCKING_TYPE" ]; then
	LOCKING_TYPE=1
    fi
    if [ "$LOCKING_TYPE" = "2" ]; then
        cat $CONFIGFILE - <<EOF > $TMPFILE
global {
    # Enable locking for cluster LVM
    locking_type = $LOCKING_TYPE
    library_dir = "$LOCKINGLIBDIR"
    locking_library = "$LOCKINGLIB"
}
EOF
    fi # if we aren't setting cluster locking, we don't need to create a global section

    if [ $? != 0 ]
    then
	echo "failed to create temporary config file, $CONFIGFILE not updated"
	exit 14
    fi
else
    #
    # We have a "global {" section, so add or replace the
    # locking entries as appropriate
    #

    if [ -n "$LOCKING_TYPE" ]; then
	if [ "$have_type" = "0" ] 
	then
	    SEDCMD=" s/^[[:blank:]]*locking_type[[:blank:]]*=.*/\ \ \ \ locking_type = $LOCKING_TYPE/g"
	else
	    SEDCMD=" /global[[:blank:]]*{/a\ \ \ \ locking_type = $LOCKING_TYPE"
	fi
    fi
    
    if [ -n "$LOCKINGLIBDIR" ]; then
        if [ "$have_dir" = "0" ] 
            then
            SEDCMD="${SEDCMD}\ns'^[[:blank:]]*library_dir[[:blank:]]*=.*'\ \ \ \ library_dir = \"$LOCKINGLIBDIR\"'g"
        else
            SEDCMD="${SEDCMD}\n/global[[:blank:]]*{/a\ \ \ \ library_dir = \"$LOCKINGLIBDIR\""
        fi

        if [ "$have_library" = "0" ] 
            then
            SEDCMD="${SEDCMD}\ns/^[[:blank:]]*locking_library[[:blank:]]*=.*/\ \ \ \ locking_library = \"$LOCKINGLIB\"/g"
        else
            SEDCMD="${SEDCMD}\n/global[[:blank:]]*{/a\ \ \ \ locking_library = \"$LOCKINGLIB\""
        fi
    fi

    if [ "$LOCKING_TYPE" = "1" ]; then
        # if we're not using cluster locking, remove the library dir and locking library name
        if [ "$have_dir" = "0" ] 
            then
            SEDCMD="${SEDCMD}\n/^[[:blank:]]*library_dir[[:blank:]]*=.*/d"
        fi

        if [ "$have_library" = "0" ] 
            then
            SEDCMD="${SEDCMD}\n/^[[:blank:]]*locking_library[[:blank:]]*=.*/d"
        fi
    fi

    echo -e $SEDCMD > $SCRIPTFILE
    sed  <$CONFIGFILE >$TMPFILE -f $SCRIPTFILE
    if [ $? != 0 ]
    then
	echo "sed failed, $CONFIGFILE not updated"
	exit 15
    fi
fi

# Now we have a suitably editted config file in a temp place,
# backup the original and copy our new one into place.

cp $CONFIGFILE $CONFIGFILE.lvmconfold
if [ $? != 0 ]
    then
    echo "failed to backup old config file, $CONFIGFILE not updated"
    exit 2
fi

cp $TMPFILE $CONFIGFILE
if [ $? != 0 ]
    then
    echo "failed to copy new config file into place, check $CONFIGFILE is still OK"
    exit 3
fi

rm -f $SCRIPTFILE $TMPFILE