| #!/bin/sh |
| # Copyright (C) 2014 Red Hat, Inc. All rights reserved. |
| # |
| # This copyrighted material is made available to anyone wishing to use, |
| # modify, copy, or redistribute it subject to the terms and conditions |
| # of the GNU General Public License v.2. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software Foundation, |
| # Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA |
| |
| test_description='Exercise toollib process_each_pv with vgreduce' |
| |
| SKIP_WITH_LVMLOCKD=1 |
| SKIP_WITH_LVMPOLLD=1 |
| |
| . lib/inittest |
| |
| aux prepare_devs 14 |
| |
| # |
| # set up |
| # |
| # FIXME: some of the setup may not be used by the tests |
| # since this was split out from process-each-pv, where |
| # some of the setup was used by other tests that only |
| # remain in process-each-pv. |
| # |
| # use use dev10 instead of dev1 because simple grep for |
| # dev1 matchines dev10,dev11,etc |
| # |
| |
| vgcreate $vg1 "$dev10" |
| vgcreate $vg2 "$dev2" "$dev3" "$dev4" "$dev5" |
| vgcreate $vg3 "$dev6" "$dev7" "$dev8" "$dev9" |
| |
| pvchange --addtag V2D3 "$dev3" |
| pvchange --addtag V2D4 "$dev4" |
| pvchange --addtag V2D45 "$dev4" |
| pvchange --addtag V2D5 "$dev5" |
| pvchange --addtag V2D45 "$dev5" |
| |
| pvchange --addtag V3 "$dev6" "$dev7" "$dev8" "$dev9" |
| pvchange --addtag V3D9 "$dev9" |
| |
| # orphan |
| pvcreate "$dev11" |
| |
| # dev (a non-pv device) |
| pvcreate "$dev12" |
| pvremove "$dev12" |
| |
| # dev13 is intentionally untouched so we can |
| # test that it is handled appropriately as a non-pv |
| |
| # orphan |
| pvcreate "$dev14" |
| |
| |
| # fail without dev |
| not vgreduce $vg2 |
| |
| |
| # fail with dev and -a |
| not vgreduce $vg2 "$dev2" -a |
| check pv_field "$dev2" vg_name $vg2 |
| check pv_field "$dev3" vg_name $vg2 |
| check pv_field "$dev4" vg_name $vg2 |
| check pv_field "$dev5" vg_name $vg2 |
| check pv_field "$dev6" vg_name $vg3 |
| check pv_field "$dev7" vg_name $vg3 |
| check pv_field "$dev8" vg_name $vg3 |
| check pv_field "$dev9" vg_name $vg3 |
| |
| |
| # remove one pv |
| vgreduce $vg2 "$dev2" |
| not check pv_field "$dev2" vg_name $vg2 |
| check pv_field "$dev3" vg_name $vg2 |
| check pv_field "$dev4" vg_name $vg2 |
| check pv_field "$dev5" vg_name $vg2 |
| check pv_field "$dev6" vg_name $vg3 |
| check pv_field "$dev7" vg_name $vg3 |
| check pv_field "$dev8" vg_name $vg3 |
| check pv_field "$dev9" vg_name $vg3 |
| # reset |
| vgextend $vg2 "$dev2" |
| |
| |
| # remove two pvs |
| vgreduce $vg2 "$dev2" "$dev3" |
| not check pv_field "$dev2" vg_name $vg2 |
| not check pv_field "$dev3" vg_name $vg2 |
| check pv_field "$dev4" vg_name $vg2 |
| check pv_field "$dev5" vg_name $vg2 |
| check pv_field "$dev6" vg_name $vg3 |
| check pv_field "$dev7" vg_name $vg3 |
| check pv_field "$dev8" vg_name $vg3 |
| check pv_field "$dev9" vg_name $vg3 |
| # reset |
| vgextend $vg2 "$dev2" "$dev3" |
| pvchange --addtag V2D3 "$dev3" |
| |
| |
| # remove one pv with tag |
| vgreduce $vg2 @V2D3 |
| check pv_field "$dev2" vg_name $vg2 |
| not check pv_field "$dev3" vg_name $vg2 |
| check pv_field "$dev4" vg_name $vg2 |
| check pv_field "$dev5" vg_name $vg2 |
| check pv_field "$dev6" vg_name $vg3 |
| check pv_field "$dev7" vg_name $vg3 |
| check pv_field "$dev8" vg_name $vg3 |
| check pv_field "$dev9" vg_name $vg3 |
| # reset |
| vgextend $vg2 "$dev3" |
| pvchange --addtag V2D3 "$dev3" |
| |
| |
| # remove two pvs, each with different tag |
| vgreduce $vg2 @V2D3 @V2D4 |
| check pv_field "$dev2" vg_name $vg2 |
| not check pv_field "$dev3" vg_name $vg2 |
| not check pv_field "$dev4" vg_name $vg2 |
| check pv_field "$dev5" vg_name $vg2 |
| check pv_field "$dev6" vg_name $vg3 |
| check pv_field "$dev7" vg_name $vg3 |
| check pv_field "$dev8" vg_name $vg3 |
| check pv_field "$dev9" vg_name $vg3 |
| # reset |
| vgextend $vg2 "$dev3" "$dev4" |
| pvchange --addtag V2D3 "$dev3" |
| pvchange --addtag V2D4 "$dev4" |
| pvchange --addtag V2D45 "$dev4" |
| |
| |
| # remove two pvs, both with same tag |
| vgreduce $vg2 @V2D45 |
| check pv_field "$dev2" vg_name $vg2 |
| check pv_field "$dev3" vg_name $vg2 |
| not check pv_field "$dev4" vg_name $vg2 |
| not check pv_field "$dev5" vg_name $vg2 |
| check pv_field "$dev6" vg_name $vg3 |
| check pv_field "$dev7" vg_name $vg3 |
| check pv_field "$dev8" vg_name $vg3 |
| check pv_field "$dev9" vg_name $vg3 |
| # reset |
| vgextend $vg2 "$dev4" "$dev5" |
| pvchange --addtag V2D4 "$dev4" |
| pvchange --addtag V2D45 "$dev4" |
| pvchange --addtag V2D5 "$dev5" |
| pvchange --addtag V2D45 "$dev5" |
| |
| |
| # remove two pvs, one by name, one by tag |
| vgreduce $vg2 "$dev2" @V2D3 |
| not check pv_field "$dev2" vg_name $vg2 |
| not check pv_field "$dev3" vg_name $vg2 |
| check pv_field "$dev4" vg_name $vg2 |
| check pv_field "$dev5" vg_name $vg2 |
| check pv_field "$dev6" vg_name $vg3 |
| check pv_field "$dev7" vg_name $vg3 |
| check pv_field "$dev8" vg_name $vg3 |
| check pv_field "$dev9" vg_name $vg3 |
| # reset |
| vgextend $vg2 "$dev2" "$dev3" |
| pvchange --addtag V2D3 "$dev3" |
| |
| |
| # remove one pv by tag, where another vg has a pv with same tag |
| pvchange --addtag V2D5V3D9 "$dev5" |
| pvchange --addtag V2D5V3D9 "$dev9" |
| vgreduce $vg2 @V2D5V3D9 |
| check pv_field "$dev2" vg_name $vg2 |
| check pv_field "$dev3" vg_name $vg2 |
| check pv_field "$dev4" vg_name $vg2 |
| not check pv_field "$dev5" vg_name $vg2 |
| check pv_field "$dev6" vg_name $vg3 |
| check pv_field "$dev7" vg_name $vg3 |
| check pv_field "$dev8" vg_name $vg3 |
| check pv_field "$dev9" vg_name $vg3 |
| # reset |
| vgextend $vg2 "$dev5" |
| pvchange --addtag V2D5 "$dev5" |
| pvchange --addtag V2D45 "$dev5" |
| |
| |
| # fail to remove last pv (don't know which will be last) |
| not vgreduce -a $vg2 |
| # reset |
| vgremove $vg2 |
| vgcreate $vg2 "$dev2" "$dev3" "$dev4" "$dev5" |
| pvchange --addtag V2D3 "$dev3" |
| pvchange --addtag V2D4 "$dev4" |
| pvchange --addtag V2D45 "$dev4" |
| pvchange --addtag V2D5 "$dev5" |
| pvchange --addtag V2D45 "$dev5" |
| |
| |
| # lvcreate on one pv to make it used |
| # remove all unused pvs |
| lvcreate -n $lv1 -l 2 $vg2 "$dev2" |
| not vgreduce -a $vg2 |
| check pv_field "$dev2" vg_name $vg2 |
| not check pv_field "$dev3" vg_name $vg2 |
| not check pv_field "$dev4" vg_name $vg2 |
| not check pv_field "$dev5" vg_name $vg2 |
| check pv_field "$dev6" vg_name $vg3 |
| check pv_field "$dev7" vg_name $vg3 |
| check pv_field "$dev8" vg_name $vg3 |
| check pv_field "$dev9" vg_name $vg3 |
| # reset |
| vgextend $vg2 "$dev3" "$dev4" "$dev5" |
| pvchange --addtag V2D3 "$dev3" |
| pvchange --addtag V2D4 "$dev4" |
| pvchange --addtag V2D45 "$dev4" |
| pvchange --addtag V2D5 "$dev5" |
| pvchange --addtag V2D45 "$dev5" |
| lvchange -an $vg2/$lv1 |
| lvremove $vg2/$lv1 |
| |
| |
| # |
| # tests including pvs without mdas |
| # |
| |
| # remove old config |
| vgremove $vg1 |
| vgremove $vg2 |
| vgremove $vg3 |
| pvremove "$dev11" |
| pvremove "$dev14" |
| |
| # new config with some pvs that have zero mdas |
| |
| # for vg1 |
| pvcreate "$dev10" |
| |
| # for vg2 |
| pvcreate "$dev2" --metadatacopies 0 |
| pvcreate "$dev3" |
| pvcreate "$dev4" |
| pvcreate "$dev5" |
| |
| # for vg3 |
| pvcreate "$dev6" --metadatacopies 0 |
| pvcreate "$dev7" --metadatacopies 0 |
| pvcreate "$dev8" --metadatacopies 0 |
| pvcreate "$dev9" |
| |
| # orphan with mda |
| pvcreate "$dev11" |
| # orphan without mda |
| pvcreate "$dev14" --metadatacopies 0 |
| |
| # non-pv devs |
| # dev12 |
| # dev13 |
| |
| vgcreate $vg1 "$dev10" |
| vgcreate $vg2 "$dev2" "$dev3" "$dev4" "$dev5" |
| vgcreate $vg3 "$dev6" "$dev7" "$dev8" "$dev9" |
| |
| pvchange --addtag V2D3 "$dev3" |
| pvchange --addtag V2D4 "$dev4" |
| pvchange --addtag V2D45 "$dev4" |
| pvchange --addtag V2D5 "$dev5" |
| pvchange --addtag V2D45 "$dev5" |
| |
| pvchange --addtag V3 "$dev6" "$dev7" "$dev8" "$dev9" |
| pvchange --addtag V3D8 "$dev8" |
| pvchange --addtag V3D9 "$dev9" |
| |
| |
| # |
| # vgreduce including pvs without mdas |
| # |
| |
| # remove pv without mda |
| vgreduce $vg2 "$dev2" |
| not check pv_field "$dev2" vg_name $vg2 |
| check pv_field "$dev3" vg_name $vg2 |
| check pv_field "$dev4" vg_name $vg2 |
| check pv_field "$dev5" vg_name $vg2 |
| check pv_field "$dev6" vg_name $vg3 |
| check pv_field "$dev7" vg_name $vg3 |
| check pv_field "$dev8" vg_name $vg3 |
| check pv_field "$dev9" vg_name $vg3 |
| # reset |
| vgextend $vg2 "$dev2" |
| |
| # remove pv with mda and pv without mda |
| vgreduce $vg2 "$dev2" "$dev3" |
| not check pv_field "$dev2" vg_name $vg2 |
| not check pv_field "$dev3" vg_name $vg2 |
| check pv_field "$dev4" vg_name $vg2 |
| check pv_field "$dev5" vg_name $vg2 |
| check pv_field "$dev6" vg_name $vg3 |
| check pv_field "$dev7" vg_name $vg3 |
| check pv_field "$dev8" vg_name $vg3 |
| check pv_field "$dev9" vg_name $vg3 |
| # reset |
| vgextend $vg2 "$dev2" |
| vgextend $vg2 "$dev3" |
| |
| # fail to remove only pv with mda |
| not vgreduce $vg3 "$dev9" |
| check pv_field "$dev6" vg_name $vg3 |
| check pv_field "$dev7" vg_name $vg3 |
| check pv_field "$dev8" vg_name $vg3 |
| check pv_field "$dev9" vg_name $vg3 |
| check pv_field "$dev2" vg_name $vg2 |
| check pv_field "$dev3" vg_name $vg2 |
| check pv_field "$dev4" vg_name $vg2 |
| check pv_field "$dev5" vg_name $vg2 |
| |
| # remove by tag a pv without mda |
| vgreduce $vg3 @V3D8 |
| check pv_field "$dev6" vg_name $vg3 |
| check pv_field "$dev7" vg_name $vg3 |
| not check pv_field "$dev8" vg_name $vg3 |
| check pv_field "$dev9" vg_name $vg3 |
| check pv_field "$dev2" vg_name $vg2 |
| check pv_field "$dev3" vg_name $vg2 |
| check pv_field "$dev4" vg_name $vg2 |
| check pv_field "$dev5" vg_name $vg2 |
| # reset |
| vgextend $vg3 "$dev8" |
| |
| vgremove $vg1 $vg2 $vg3 |
