| %import macros.inc |
| |
| ############################################################## |
| # Defaults (rawhide)... |
| |
| %global enable_profiling 0 |
| %global enable_testsuite 1 |
| %global enable_python 1 |
| # Off by default - <= does not work well with or: |
| %global enable_python3 0 |
| %global enable_dbusd 0 |
| %global enable_udev 1 |
| %global enable_systemd 1 |
| %global enable_cmirror 1 |
| %global enable_lvmlockd 1 |
| %global enable_lvmetad 1 |
| %global enable_lvmpolld 1 |
| #%global enable_lockd_dlm 0 |
| #%global enable_lockd_sanlock 0 |
| |
| %if %{enable_udev} |
| %service lvmetad 1 |
| %service lvmpolld 1 |
| %endif |
| |
| ######################################################## |
| # Normally clustering is maintained via resource agents |
| # |
| # enable service only if you know what you are doing |
| # |
| %if %{enable_cmirror} |
| #service clvmd 1 |
| #service cmirrord 1 |
| %endif |
| |
| %global buildreq_cluster corosync-devel >= 1.99.9-1, dlm-devel >= 3.99.1-1 |
| %global req_cluster corosync >= 1.99.9-1, dlm >= 3.99.2-1 |
| %with clvmd corosync |
| |
| # TODO %global req_dm_persistent device-mapper-persistent-data >= 0.1.4 |
| %with cache internal |
| %with thin internal |
| %with thin_check %{_sbindir}/thin_check |
| %with thin_repair %{_sbindir}/thin_repair |
| %with thin_dump %{_sbindir}/thin_dump |
| |
| %global buildreq_udev systemd-devel |
| %global req_udev udev >= 181-1 |
| |
| |
| %if %{fedora} >= 22 || %{rhel} >= 7 |
| %service lvmlockd 1 |
| %define sanlock_version 3.2.4-1 |
| %define enable_lockd_dlm 1 |
| %define enable_lockd_sanlock 1 |
| %if %{rhel} |
| %ifarch i686 x86_64 s390x |
| %global buildreq_lockd_dlm dlm-devel >= %{dlm_version} |
| %else |
| %define enable_lockd_dlm 0 |
| %endif |
| %ifarch x86_64 ppc64le ppc64 aarch64 |
| %global buildreq_lockd_sanlock sanlock-devel >= %{sanlock_version} |
| %else |
| %define enable_lockd_sanlock 0 |
| %endif |
| %endif |
| %endif |
| |
| ############################################################## |
| |
| %if %{rhel} == 5 |
| %global enable_python 0 |
| %endif |
| |
| %if %{rhel} >= 8 || %{fedora} >= 20 |
| %global enable_python3 1 |
| %endif |
| |
| %if %{enable_python} |
| %global buildreq_python2_devel python2-devel |
| %global buildreq_python_setuptools python-setuptools |
| %endif |
| %if %{enable_python3} |
| %global buildreq_python3_devel python3-devel |
| %global buildreq_python_setuptools python-setuptools |
| %endif |
| |
| ############################################################## |
| |
| %if %{rhel} >= 8 || %{fedora} >= 23 |
| %if %{enable_python3} |
| %global enable_dbusd 1 |
| %else |
| # dbusd requires python3 |
| false |
| %endif |
| %endif |
| |
| %if %{enable_dbusd} |
| %global buildreq_python3_dbus python3-dbus |
| %global buildreq_python3_pyudev python3-pyudev |
| %endif |
| |
| ############################################################## |
| |
| %if %{fedora} == 16 || %{rhel} == 6 |
| %global enable_systemd 0 |
| |
| %global buildreq_udev libudev-devel |
| %global buildreq_cluster openaislib-devel >= 1.1.1-1, clusterlib-devel >= 3.0.6-1, corosynclib-devel >= 1.2.0-1 |
| |
| %global req_udev udev >= 158-1 |
| %global req_cluster openais >= 1.1.1-1, cman >= 3.0.6-1, corosync >= 1.2.0-1 |
| |
| %global _udevbasedir /lib/udev |
| %global _udevdir %{_udevbasedir}/rules.d |
| %endif |
| |
| %if %{fedora} == 16 |
| %with cache none |
| %with thin none |
| %with thin_check |
| %with thin_repair |
| %with thin_dump |
| %endif |
| |
| ############################################################## |
| |
| %if %{fedora} == 17 |
| %global buildreq_udev systemd-devel |
| %global buildreq_cluster corosync-devel >= 1.99.9-1, dlm-devel >= 3.99.1-1 |
| |
| %global req_udev udev >= 181-1 |
| %global req_dm_persistent device-mapper-persistent-data >= 0.1.4 |
| %global req_cluster corosync >= 1.99.9-1, dlm >= 3.99.2-1 |
| %endif |
| |
| ############################################################## |
| # same as FC 16 above, only with older udev |
| |
| %if %{rhel} == 6 |
| %define req_udev udev >= 147-2 |
| %global req_dm_persistent device-mapper-persistent-data >= 0.1.4 |
| %endif |
| |
| ############################################################## |
| |
| # Do not reset Release to 1 unless both lvm2 and device-mapper |
| # versions are increased together. |
| |
| %define device_mapper_version 1.02.97 |
| |
| Summary: Userland logical volume management tools |
| Name: lvm2 |
| Version: 2.02.120 |
| Release: 1%{?dist} |
| License: GPLv2 |
| Group: System Environment/Base |
| URL: http://sources.redhat.com/lvm2 |
| Source0: ftp://sources.redhat.com/pub/lvm2/LVM2.%{version}.tgz |
| Source91: source.inc |
| Source92: build.inc |
| Source93: packages.inc |
| Source94: macros.inc |
| |
| BuildRequires: libselinux-devel >= 1.30.19-4, libsepol-devel |
| BuildRequires: ncurses-devel |
| BuildRequires: readline-devel |
| BuildRequires: module-init-tools |
| BuildRequires: pkgconfig |
| |
| # Expands to nothing unless at least 2 arguments are given |
| %define maybe() \ |
| %if %(test -n "%{?2}" && echo 1 || echo 0) \ |
| %* \ |
| %endif |
| %define ifwith() \ |
| %if %(if echo %{with_flags} | grep -q %1; then echo 1; else echo 0; fi) |
| |
| %maybe BuildRequires: %{?buildreq_udev} |
| %maybe BuildRequires: %{?buildreq_cluster} |
| %maybe BuildRequires: %{?buildreq_lockd_dlm} |
| %maybe BuildRequires: %{?buildreq_lockd_sanlock} |
| %maybe BuildRequires: %{?buildreq_python2_devel} |
| %maybe BuildRequires: %{?buildreq_python3_devel} |
| %maybe BuildRequires: %{?buildreq_python_setuptools} |
| |
| %description |
| LVM2 includes all of the support for handling read/write operations on |
| physical volumes (hard disks, RAID-Systems, magneto optical, etc., |
| multiple devices (MD), see mdadd(8) or even loop devices, see |
| losetup(8)), creating volume groups (kind of virtual disks) from one |
| or more physical volumes and creating one or more logical volumes |
| (kind of logical partitions) in volume groups. |