| #!/bin/sh |
| |
| # Copyright (C) 2013 Red Hat, Inc. All rights reserved. |
| # |
| # This copyrighted material is made available to anyone wishing to use, |
| # modify, copy, or redistribute it subject to the terms and conditions |
| # of the GNU General Public License v.2. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software Foundation, |
| # Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA |
| |
| # Test conversion to thin external origin |
| |
| SKIP_WITH_LVMLOCKD=1 |
| SKIP_WITH_LVMPOLLD=1 |
| |
| export LVM_TEST_THIN_REPAIR_CMD=${LVM_TEST_THIN_REPAIR_CMD-/bin/false} |
| |
| . lib/inittest |
| |
| which mkfs.ext2 || skip |
| which fsck || skip |
| |
| # |
| # Main |
| # |
| aux have_thin 1 5 0 || skip |
| |
| aux prepare_pvs 2 64 |
| |
| vgcreate $vg --metadatasize 128K -s 64K $(cat DEVICES) |
| |
| if test 0 -eq 1 ; then |
| # FIXME: needs patch to allow inactive old-snap creation |
| lvcreate -l10 -T $vg/pool |
| lvcreate -an -pr --zero n -l10 --name $lv1 $vg |
| lvcreate -s $vg/$lv1 --name $lv2 --thinpool $vg/pool |
| vgchange -an $vg |
| # oldstyle read-only inactive snapshot |
| lvcreate -an -s $vg/$lv2 -l10 -p r --name $lv3 |
| |
| lvcreate -s $vg/$lv3 --name $lv4 --thinpool $vg/pool |
| lvremove -ff $vg/$lv3 |
| |
| lvremove -ff $vg |
| fi |
| |
| #lvcreate -L20M --name orig $vg |
| #lvconvert -T --thinpool $vg/pool $vg/orig |
| #lvcreate -s -aey -L10M $vg/orig |
| #lvremove -f $vg |
| #exit 0 |
| |
| lvcreate -l10 -T $vg/pool |
| # Can't convert pool to external origin |
| lvcreate -l10 -T $vg/pool1 -c 192k |
| not lvconvert -T --thinpool $vg/pool1 $vg/pool --originname origin |
| # Create pool1 chunk_size unaligned LV and check failing conversion |
| lvcreate -l2 -n $lv1 $vg |
| # Newer thin-pool target (>= 1.13) supports unaligned external origin |
| aux lvmconf 'global/thin_disabled_features = [ "external_origin_extend" ]' |
| not lvconvert -T --thinpool $vg/pool1 $vg/$lv1 |
| |
| lvremove -f $vg/pool1 $vg/$lv1 |
| |
| # create plain LV (will be used for external origin) |
| lvcreate -L8M -n $lv1 $vg |
| |
| # Can't convert same LV to the thin pool and thin volume |
| not lvconvert --thinpool $vg/$lv1 -T $vg/$lv1 |
| check lv_field $vg/$lv1 segtype linear |
| |
| mkfs.ext2 "$DM_DEV_DIR/$vg/$lv1" |
| mkdir mnt |
| mount "$DM_DEV_DIR/$vg/$lv1" mnt |
| |
| dd if=/dev/zero of=mnt/test1 bs=1M count=1 |
| |
| # convert plain LV into thin external snapshot volume |
| # during conversion dd above could be still flushed |
| |
| lvconvert -T --originname extorg --thinpool $vg/pool $vg/$lv1 |
| |
| check active $vg $lv1 |
| # FIXME handling attr is ... |
| get lv_field $vg/extorg attr | grep "^ori" |
| check inactive $vg extorg |
| |
| touch mnt/test |
| umount mnt |
| |
| # check fs is without errors |
| fsck -n "$DM_DEV_DIR/$vg/$lv1" |
| |
| lvchange -aey $vg/extorg |
| lvchange -an $vg/$lv1 |
| |
| check active $vg extorg |
| check inactive $vg $lv1 |
| |
| # fsck in read-only mode |
| fsck -n "$DM_DEV_DIR/$vg/extorg" |
| |
| not lvresize -l+8 $vg/extorg |
| not lvresize -l-4 $vg/extorg |
| not lvchange -p rw $vg/extorg |
| |
| #lvresize -L+8M $vg/$lv1 |
| #lvresize -L-4M $vg/$lv1 |
| #lvchange -p r $vg/$lv1 |
| #lvchange -p rw $vg/$lv1 |
| |
| lvchange -aey $vg |
| |
| lvs -a -o+origin_size,seg_size $vg |
| |
| # Chain external origins |
| lvconvert --type thin --originname extorg1 --thinpool $vg/pool $vg/extorg |
| check inactive $vg extorg1 |
| |
| lvconvert --originname extorg2 --thinpool $vg/pool -T $vg/extorg1 |
| check inactive $vg extorg1 |
| check inactive $vg extorg2 |
| |
| lvchange -an $vg/extorg |
| lvchange -ay $vg/extorg1 |
| |
| lvcreate -l4 -s $vg/$lv1 -n $lv2 |
| lvcreate -l8 -s $vg/extorg -n $lv3 |
| lvcreate -l12 -s $vg/extorg1 -n $lv4 |
| lvcreate -l16 -s $vg/extorg2 -n $lv5 |
| #vgchange -aey $vg |
| #lvremove -f $vg/extorg2 |
| #exit 0 |
| # Converting old-snapshot into external origin is not supported |
| not lvconvert -T --thinpool $vg/pool --originname lv5origin $vg/$lv4 |
| |
| lvs -a -o +segtype $vg |
| |
| check lv_field $vg/$lv1 segtype thin |
| check lv_field $vg/$lv2 segtype linear |
| check lv_field $vg/$lv3 segtype linear |
| check lv_field $vg/$lv4 segtype linear |
| check lv_field $vg/$lv5 segtype linear |
| check lv_field $vg/extorg segtype thin |
| check lv_field $vg/extorg1 segtype thin |
| check lv_field $vg/extorg2 segtype linear |
| |
| vgchange -ay $vg |
| |
| lvs -a -o+origin_size,seg_size $vg |
| |
| lvchange -an $vg/extorg2 |
| check inactive $vg extorg2 |
| |
| # Remove all volumes dependent on external origin |
| lvs -a -o+origin_size,seg_size,segtype $vg |
| lvremove -f $vg/extorg2 |
| # Only pool is left |
| check vg_field $vg lv_count 1 |
| lvremove -ff $vg |
| |
| # Test conversion to the pool and thin external at the same time (rhbz #1003461) |
| lvcreate -l50 -n pool $vg |
| lvcreate -l100 -n thin $vg |
| lvconvert --yes --thin --thinpool $vg/pool $vg/thin --originname thin-origin |
| check lv_field $vg/thin segtype thin |
| check lv_field $vg/thin-origin segtype linear |
| lvremove -ff $vg |
| |
| # Test conversion with non-zeroing thin-pool, should not WARN about zeroing |
| lvcreate -l50 -n pool $vg |
| lvcreate -l100 -n thin $vg |
| lvconvert --yes --thin --thinpool $vg/pool $vg/thin --zero n --originname thin-origin 2>&1 | tee out |
| not grep "not zeroed" out |
| check lv_field $vg/pool zero "" |
| |
| vgremove -ff $vg |
