| #!/bin/sh |
| # Copyright (C) 2012-2016 Red Hat, Inc. All rights reserved. |
| # |
| # This copyrighted material is made available to anyone wishing to use, |
| # modify, copy, or redistribute it subject to the terms and conditions |
| # of the GNU General Public License v.2. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software Foundation, |
| # Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA |
| |
| SKIP_WITH_LVMLOCKD=1 |
| SKIP_WITH_LVMPOLLD=1 |
| |
| . lib/inittest |
| |
| lv_devices() { |
| test $3 -eq $(get lv_devices $1/$2 | wc -w) |
| } |
| |
| ######################################################## |
| # MAIN |
| ######################################################## |
| aux have_raid 1 3 0 || skip |
| |
| aux prepare_pvs 6 20 # 6 devices for RAID10 (2-mirror,3-stripe) test |
| vgcreate -s 512k $vg $(cat DEVICES) |
| |
| # |
| # Create RAID10: |
| # |
| |
| # Should not allow more than 2-way mirror |
| not lvcreate --type raid10 -m 2 -i 2 -l 2 -n $lv1 $vg |
| |
| # 2-way mirror, 2-stripes |
| lvcreate --type raid10 -m 1 -i 2 -l 2 -n $lv1 $vg |
| aux wait_for_sync $vg $lv1 |
| lvremove -ff $vg/$lv1 |
| |
| # 2-way mirror, 2-stripes - Set min/max recovery rate |
| lvcreate --type raid10 -m 1 -i 2 -l 2 \ |
| --minrecoveryrate 50 --maxrecoveryrate 1M \ |
| -n $lv1 $vg |
| check lv_field $vg/$lv1 raid_min_recovery_rate 50 |
| check lv_field $vg/$lv1 raid_max_recovery_rate 1024 |
| aux wait_for_sync $vg $lv1 |
| |
| # 2-way mirror, 3-stripes |
| lvcreate --type raid10 -m 1 -i 3 -l 3 -n $lv2 $vg |
| aux wait_for_sync $vg $lv2 |
| |
| lvremove -ff $vg |
| |
| # Test 100%FREE option |
| # 38 extents / device |
| # 1 image = 37 extents (1 for meta) |
| # 3 images = 111 extents = 55.50m |
| lvcreate --type raid10 -i 3 -l 100%FREE -an -Zn -n raid10 $vg |
| check lv_field $vg/raid10 size "55.50m" |
| lvremove -ff $vg |
| |
| # Create RAID (implicit stripe count based on PV count) |
| ####################################################### |
| |
| # Not enough drives |
| not lvcreate --type raid10 -l2 $vg "$dev1" "$dev2" "$dev3" |
| |
| # Implicit count comes from #PVs given (always 2-way mirror) |
| # Defaults -i2, which works with 4 PVs listed |
| lvcreate --type raid10 -l2 -an -Zn -n raid10 $vg "$dev1" "$dev2" "$dev3" "$dev4" |
| lv_devices $vg raid10 4 |
| |
| # Defaults -i2 even though more PVs listed |
| lvcreate --type raid10 -l2 -an -Zn -n raid10_6 $vg "$dev1" "$dev2" "$dev3" "$dev4" "$dev5" "$dev6" |
| lv_devices $vg raid10_6 4 |
| |
| lvremove -ff $vg |
| |
| # |
| # FIXME: Add tests that specify particular PVs to use for creation |
| # |
| |
| |
| ######################################################## |
| # Try again with backward compatible old logic applied # |
| ######################################################## |
| aux lvmconf 'allocation/raid_stripe_all_devices = 1' |
| |
| # Implicit count comes from #PVs given (always 2-way mirror) |
| lvcreate --type raid10 -l2 -an -Zn -n raid10 $vg "$dev1" "$dev2" "$dev3" "$dev4" |
| lv_devices $vg raid10 4 |
| |
| # Implicit count comes from total #PVs in VG (always 2 for mirror though) |
| lvcreate --type raid10 -l2 -an -Zn -n raid10_vg $vg |
| lv_devices $vg raid10_vg 6 |
| |
| vgremove -ff $vg |