| #!/bin/sh |
| # Copyright (C) 2007-2011 Red Hat, Inc. All rights reserved. |
| # |
| # This copyrighted material is made available to anyone wishing to use, |
| # modify, copy, or redistribute it subject to the terms and conditions |
| # of the GNU General Public License v.2. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software Foundation, |
| # Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA |
| |
| # Test vgsplit command options for validity |
| |
| SKIP_WITH_LVMLOCKD=1 |
| SKIP_WITH_LVMPOLLD=1 |
| |
| . lib/inittest |
| |
| aux prepare_devs 5 |
| |
| if test -n "$LVM_TEST_LVM1" ; then |
| mdatypes='1 2' |
| else |
| mdatypes='2' |
| fi |
| |
| for mdatype in $mdatypes |
| do |
| |
| pvcreate -M$mdatype $(cat DEVICES) |
| |
| # ensure name order does not matter |
| # NOTE: if we're using lvm1, we must use -M on vgsplit |
| vgcreate -M$mdatype $vg1 $(cat DEVICES) |
| vgsplit -M$mdatype $vg1 $vg2 "$dev1" |
| vgremove $vg1 $vg2 |
| |
| vgcreate -M$mdatype $vg2 $(cat DEVICES) |
| vgsplit -M$mdatype $vg2 $vg1 "$dev1" |
| vgremove $vg1 $vg2 |
| |
| # vgsplit accepts new vg as destination of split |
| # lvm1 -- bz244792 |
| vgcreate -M$mdatype $vg1 $(cat DEVICES) |
| vgsplit $vg1 $vg2 "$dev1" 1>err |
| grep "New volume group \"$vg2\" successfully split from \"$vg1\"" err |
| vgremove $vg1 $vg2 |
| |
| # vgsplit accepts existing vg as destination of split |
| vgcreate -M$mdatype $vg1 "$dev1" "$dev2" |
| vgcreate -M$mdatype $vg2 "$dev3" "$dev4" |
| vgsplit $vg1 $vg2 "$dev1" 1>err |
| grep "Existing volume group \"$vg2\" successfully split from \"$vg1\"" err |
| vgremove $vg1 $vg2 |
| |
| # vgsplit accepts --maxphysicalvolumes 128 on new VG |
| vgcreate -M$mdatype $vg1 "$dev1" "$dev2" |
| vgsplit --maxphysicalvolumes 128 $vg1 $vg2 "$dev1" |
| check vg_field $vg2 max_pv 128 |
| vgremove $vg1 $vg2 |
| |
| # vgsplit accepts --maxlogicalvolumes 128 on new VG |
| vgcreate -M$mdatype $vg1 "$dev1" "$dev2" |
| vgsplit --maxlogicalvolumes 128 $vg1 $vg2 "$dev1" |
| check vg_field $vg2 max_lv 128 |
| vgremove $vg1 $vg2 |
| |
| # vgsplit rejects split because max_pv of destination would be exceeded |
| vgcreate -M$mdatype --maxphysicalvolumes 2 $vg1 "$dev1" "$dev2" |
| vgcreate -M$mdatype --maxphysicalvolumes 2 $vg2 "$dev3" "$dev4" |
| not vgsplit $vg1 $vg2 "$dev1" 2>err; |
| grep "Maximum number of physical volumes (2) exceeded" err |
| vgremove $vg1 $vg2 |
| |
| # vgsplit rejects split because maxphysicalvolumes given with existing vg |
| vgcreate -M$mdatype --maxphysicalvolumes 2 $vg1 "$dev1" "$dev2" |
| vgcreate -M$mdatype --maxphysicalvolumes 2 $vg2 "$dev3" "$dev4" |
| not vgsplit --maxphysicalvolumes 2 $vg1 $vg2 "$dev1" 2>err; |
| grep "Volume group \"$vg2\" exists, but new VG option specified" err |
| vgremove $vg1 $vg2 |
| |
| # vgsplit rejects split because maxlogicalvolumes given with existing vg |
| vgcreate -M$mdatype --maxlogicalvolumes 2 $vg1 "$dev1" "$dev2" |
| vgcreate -M$mdatype --maxlogicalvolumes 2 $vg2 "$dev3" "$dev4" |
| not vgsplit --maxlogicalvolumes 2 $vg1 $vg2 "$dev1" 2>err |
| grep "Volume group \"$vg2\" exists, but new VG option specified" err |
| vgremove $vg1 $vg2 |
| |
| # vgsplit rejects split because alloc given with existing vg |
| vgcreate -M$mdatype --alloc cling $vg1 "$dev1" "$dev2" |
| vgcreate -M$mdatype --alloc cling $vg2 "$dev3" "$dev4" |
| not vgsplit --alloc cling $vg1 $vg2 "$dev1" 2>err; |
| grep "Volume group \"$vg2\" exists, but new VG option specified" err |
| vgremove $vg1 $vg2 |
| |
| # vgsplit rejects split because clustered given with existing vg |
| vgcreate -M$mdatype --clustered n $vg1 "$dev1" "$dev2" |
| vgcreate -M$mdatype --clustered n $vg2 "$dev3" "$dev4" |
| not vgsplit --clustered n $vg1 $vg2 "$dev1" 2>err |
| grep "Volume group \"$vg2\" exists, but new VG option specified" err |
| vgremove $vg1 $vg2 |
| |
| # vgsplit rejects vg with active lv |
| pvcreate -M$mdatype -ff "$dev3" "$dev4" |
| vgcreate -M$mdatype $vg1 "$dev1" "$dev2" |
| vgcreate -M$mdatype $vg2 "$dev3" "$dev4" |
| lvcreate -l 4 -n $lv1 $vg1 |
| not vgsplit $vg1 $vg2 "$dev1" 2>err; |
| grep "Logical volumes in \"$vg1\" must be inactive\$" err |
| vgremove -f $vg1 $vg2 |
| |
| # vgsplit rejects split because max_lv is exceeded |
| vgcreate -M$mdatype --maxlogicalvolumes 2 $vg1 "$dev1" "$dev2" |
| vgcreate -M$mdatype --maxlogicalvolumes 2 $vg2 "$dev3" "$dev4" |
| lvcreate -l 4 -n $lv1 $vg1 |
| lvcreate -l 4 -n $lv2 $vg1 |
| lvcreate -l 4 -n $lv3 $vg2 |
| vgchange -an $vg1 $vg2 |
| not vgsplit $vg1 $vg2 "$dev1" 2>err; |
| grep "Maximum number of logical volumes (2) exceeded" err |
| vgremove -f $vg1 $vg2 |
| |
| # vgsplit verify default - max_lv attribute from new VG is same as source VG" \ |
| vgcreate -M$mdatype $vg1 "$dev1" "$dev2" |
| lvcreate -l 4 -n $lv1 $vg1 |
| vgchange -an $vg1 |
| vgsplit $vg1 $vg2 "$dev1" |
| check compare_vg_field $vg1 $vg2 max_lv |
| vgremove -f $vg1 $vg2 |
| |
| # vgsplit verify default - max_pv attribute from new VG is same as source VG" \ |
| vgcreate -M$mdatype $vg1 "$dev1" "$dev2" |
| lvcreate -l 4 -n $lv1 $vg1 |
| vgchange -an $vg1 |
| vgsplit $vg1 $vg2 "$dev1" |
| check compare_vg_field $vg1 $vg2 max_pv |
| vgremove -f $vg1 $vg2 |
| |
| # vgsplit verify default - vg_fmt attribute from new VG is same as source VG" \ |
| vgcreate -M$mdatype $vg1 "$dev1" "$dev2" |
| lvcreate -l 4 -n $lv1 $vg1 |
| vgchange -an $vg1 |
| vgsplit $vg1 $vg2 "$dev1" |
| check compare_vg_field $vg1 $vg2 vg_fmt |
| vgremove -f $vg2 $vg1 |
| |
| # vgsplit rejects split because PV not in VG |
| vgcreate -M$mdatype $vg1 "$dev1" "$dev2" |
| vgcreate -M$mdatype $vg2 "$dev3" "$dev4" |
| lvcreate -l 4 -n $lv1 $vg1 |
| lvcreate -l 4 -n $lv2 $vg1 |
| vgchange -an $vg1 |
| not vgsplit $vg1 $vg2 "$dev3" 2>err; |
| vgremove -f $vg2 $vg1 |
| |
| # Restart clvm because using the same |
| # devs as lvm1 and then lvm2 causes problems. |
| if test -e LOCAL_CLVMD ; then |
| kill $(< LOCAL_CLVMD) |
| for i in $(seq 1 100) ; do |
| test $i -eq 100 && die "Shutdown of clvmd is too slow." |
| pgrep clvmd || break |
| sleep .1 |
| done # wait for the pid removal |
| aux prepare_clvmd |
| fi |
| |
| done |
| |
| if test -z "$LVM_TEST_LVM1" ; then |
| # ONLY LVM2 metadata |
| # setup PVs" ' |
| pvcreate --metadatacopies 0 "$dev5" |
| |
| # vgsplit rejects to give away pv with the last mda copy |
| vgcreate $vg1 "$dev5" "$dev2" |
| lvcreate -l 10 -n $lv1 $vg1 |
| lvchange -an $vg1/$lv1 |
| check pvlv_counts $vg1 2 1 0 |
| not vgsplit $vg1 $vg2 "$dev5"; |
| check pvlv_counts $vg1 2 1 0 |
| vgremove -f $vg1 |
| |
| # vgsplit rejects split because metadata types differ |
| pvcreate -ff -M1 "$dev3" "$dev4" |
| pvcreate -ff "$dev1" "$dev2" |
| vgcreate -M1 $vg1 "$dev3" "$dev4" |
| vgcreate $vg2 "$dev1" "$dev2" |
| not vgsplit $vg1 $vg2 "$dev3" 2>err; |
| grep "Metadata types differ" err |
| vgremove -f $vg1 $vg2 |
| fi |
