/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

/*
 * Base64 decoding (ascii to binary).
 */

#include "nssb64.h"
#include "nspr.h"
#include "secitem.h"
#include "secerr.h"

/*
 * XXX We want this basic support to go into NSPR (the PL part).
 * Until that can happen, the PL interface is going to be kept entirely
 * internal here -- all static functions and opaque data structures.
 * When someone can get it moved over into NSPR, that should be done:
 *    - giving everything names that are accepted by the NSPR module owners
 *  (though I tried to choose ones that would work without modification)
 *    - exporting the functions (remove static declarations and add
 *  to nssutil.def as necessary)
 *    - put prototypes into appropriate header file (probably replacing
 *  the entire current lib/libc/include/plbase64.h in NSPR)
 *  along with a typedef for the context structure (which should be
 *  kept opaque -- definition in the source file only, but typedef
 *  ala "typedef struct PLBase64FooStr PLBase64Foo;" in header file)
 *    - modify anything else as necessary to conform to NSPR required style
 *  (I looked but found no formatting guide to follow)
 *
 * You will want to move over everything from here down to the comment
 * which says "XXX End of base64 decoding code to be moved into NSPR",
 * into a new file in NSPR.
 */

/*
 **************************************************************
 * XXX Beginning of base64 decoding code to be moved into NSPR.
 */

/*
 * This typedef would belong in the NSPR header file (i.e. plbase64.h).
 */
typedef struct PLBase64DecoderStr PLBase64Decoder;

/*
 * The following implementation of base64 decoding was based on code
 * found in libmime (specifically, in mimeenc.c).  It has been adapted to
 * use PR types and naming as well as to provide other necessary semantics
 * (like buffer-in/buffer-out in addition to "streaming" without undue
 * performance hit of extra copying if you made the buffer versions
 * use the output_fn).  It also incorporates some aspects of the current
 * NSPR base64 decoding code.  As such, you may find similarities to
 * both of those implementations.  I tried to use names that reflected
 * the original code when possible.  For this reason you may find some
 * inconsistencies -- libmime used lots of "in" and "out" whereas the
 * NSPR version uses "src" and "dest"; sometimes I changed one to the other
 * and sometimes I left them when I thought the subroutines were at least
 * self-consistent.
 */

PR_BEGIN_EXTERN_C

/*
 * Opaque object used by the decoder to store state.
 */
struct PLBase64DecoderStr {
    /* Current token (or portion, if token_size < 4) being decoded. */
    unsigned char token[4];
    int token_size;

    /*
     * Where to write the decoded data (used when streaming, not when
     * doing all in-memory (buffer) operations).
     *
     * Note that this definition is chosen to be compatible with PR_Write.
     */
    PRInt32 (*output_fn)(void *output_arg, const unsigned char *buf,
                         PRInt32 size);
    void *output_arg;

    /*
     * Where the decoded output goes -- either temporarily (in the streaming
     * case, staged here before it goes to the output function) or what will
     * be the entire buffered result for users of the buffer version.
     */
    unsigned char *output_buffer;
    PRUint32 output_buflen; /* the total length of allocated buffer */
    PRUint32 output_length; /* the length that is currently populated */
};

PR_END_EXTERN_C

/* A constant time range check for unsigned chars.
 * Returns 255 if a <= x <= b and 0 otherwise.
 */
static inline unsigned char
ct_u8_in_range(unsigned char x, unsigned char a, unsigned char b)
{
    /*  Let x, a, b be ints in {0, 1, ... 255}.
     *  The value (a - x - 1) is in {-256, ..., 254}, so the low
     *  8 bits of
     *      (a - x - 1) >> 8
     *  are all 1 if a <= x and all 0 if a > x.
     *
     *  Likewise the low 8 bits of
     *      ((a - x - 1) >> 8) & ((x - c - 1) >> 8)
     *  are all 1 if a <= x <= c and all 0 otherwise.
     *
     *  The same is true if we perform the shift after the AND
     *      ((a - x - 1) & (x - b - 1)) >> 8.
     */
    return (unsigned char)(((a - x - 1) & (x - b - 1)) >> 8);
}

/* Convert a base64 code [A-Za-z0-9+/] to its value in {1, 2, ..., 64}.
 * The use of 1-64 instead of 0-63 is so that the special value of zero can
 * denote an invalid mapping; that was much easier than trying to fill in the
 * other values with some value other than zero, and to check for it.
 * Just remember to SUBTRACT ONE when using the value retrieved.
 */
static unsigned char
pl_base64_codetovaluep1(unsigned char code)
{
    unsigned char mask;
    unsigned char res = 0;

    /* The range 'A' to 'Z' is mapped to 1 to 26 */
    mask = ct_u8_in_range(code, 'A', 'Z');
    res |= mask & (code - 'A' + 1);

    /* The range 'a' to 'z' is mapped to 27 to 52 */
    mask = ct_u8_in_range(code, 'a', 'z');
    res |= mask & (code - 'a' + 27);

    /* The range '0' to '9' is mapped to 53 to 62 */
    mask = ct_u8_in_range(code, '0', '9');
    res |= mask & (code - '0' + 53);

    /* The code '+' is mapped to 63 */
    mask = ct_u8_in_range(code, '+', '+');
    res |= mask & 63;

    /* The code '/' is mapped to 64 */
    mask = ct_u8_in_range(code, '/', '/');
    res |= mask & 64;

    /* All other characters, including '=' are mapped to 0. */
    return res;
}

#define B64_PAD '='

/*
 * Reads 4; writes 3 (known, or expected, to have no trailing padding).
 * Returns bytes written; -1 on error (unexpected character).
 */
static int
pl_base64_decode_4to3(const unsigned char *in, unsigned char *out)
{
    int j;
    PRUint32 num = 0;
    unsigned char bits;

    for (j = 0; j < 4; j++) {
        bits = pl_base64_codetovaluep1(in[j]);
        if (bits == 0)
            return -1;
        num = (num << 6) | (bits - 1);
    }

    out[0] = (unsigned char)(num >> 16);
    out[1] = (unsigned char)((num >> 8) & 0xFF);
    out[2] = (unsigned char)(num & 0xFF);

    return 3;
}

/*
 * Reads 3; writes 2 (caller already confirmed EOF or trailing padding).
 * Returns bytes written; -1 on error (unexpected character).
 */
static int
pl_base64_decode_3to2(const unsigned char *in, unsigned char *out)
{
    PRUint32 num = 0;
    unsigned char bits1, bits2, bits3;

    bits1 = pl_base64_codetovaluep1(in[0]);
    bits2 = pl_base64_codetovaluep1(in[1]);
    bits3 = pl_base64_codetovaluep1(in[2]);

    if ((bits1 == 0) || (bits2 == 0) || (bits3 == 0))
        return -1;

    num = ((PRUint32)(bits1 - 1)) << 10;
    num |= ((PRUint32)(bits2 - 1)) << 4;
    num |= ((PRUint32)(bits3 - 1)) >> 2;

    out[0] = (unsigned char)(num >> 8);
    out[1] = (unsigned char)(num & 0xFF);

    return 2;
}

/*
 * Reads 2; writes 1 (caller already confirmed EOF or trailing padding).
 * Returns bytes written; -1 on error (unexpected character).
 */
static int
pl_base64_decode_2to1(const unsigned char *in, unsigned char *out)
{
    PRUint32 num = 0;
    unsigned char bits1, bits2;

    bits1 = pl_base64_codetovaluep1(in[0]);
    bits2 = pl_base64_codetovaluep1(in[1]);

    if ((bits1 == 0) || (bits2 == 0))
        return -1;

    num = ((PRUint32)(bits1 - 1)) << 2;
    num |= ((PRUint32)(bits2 - 1)) >> 4;

    out[0] = (unsigned char)num;

    return 1;
}

/*
 * Reads 4; writes 0-3.  Returns bytes written or -1 on error.
 * (Writes less than 3 only at (presumed) EOF.)
 */
static int
pl_base64_decode_token(const unsigned char *in, unsigned char *out)
{
    if (in[3] != B64_PAD)
        return pl_base64_decode_4to3(in, out);

    if (in[2] == B64_PAD)
        return pl_base64_decode_2to1(in, out);

    return pl_base64_decode_3to2(in, out);
}

static PRStatus
pl_base64_decode_buffer(PLBase64Decoder *data, const unsigned char *in,
                        PRUint32 length)
{
    unsigned char *out = data->output_buffer;
    unsigned char *token = data->token;
    int i, n = 0;

    i = data->token_size;
    data->token_size = 0;

    while (length > 0) {
        while (i < 4 && length > 0) {
            /*
             * XXX Note that the following simply ignores any unexpected
             * characters.  This is exactly what the original code in
             * libmime did, and I am leaving it.  We certainly want to skip
             * over whitespace (we must); this does much more than that.
             * I am not confident changing it, and I don't want to slow
             * the processing down doing more complicated checking, but
             * someone else might have different ideas in the future.
             */
            if (pl_base64_codetovaluep1(*in) > 0 || *in == B64_PAD)
                token[i++] = *in;
            in++;
            length--;
        }

        if (i < 4) {
            /* Didn't get enough for a complete token. */
            data->token_size = i;
            break;
        }
        i = 0;

        PR_ASSERT((PRUint32)(out - data->output_buffer + 3) <= data->output_buflen);

        /*
         * Assume we are not at the end; the following function only works
         * for an internal token (no trailing padding characters) but is
         * faster that way.  If it hits an invalid character (padding) it
         * will return an error; we break out of the loop and try again
         * calling the routine that will handle a final token.
         * Note that we intentionally do it this way rather than explicitly
         * add a check for padding here (because that would just slow down
         * the normal case) nor do we rely on checking whether we have more
         * input to process (because that would also slow it down but also
         * because we want to allow trailing garbage, especially white space
         * and cannot tell that without read-ahead, also a slow proposition).
         * Whew.  Understand?
         */
        n = pl_base64_decode_4to3(token, out);
        if (n < 0)
            break;

        /* Advance "out" by the number of bytes just written to it. */
        out += n;
        n = 0;
    }

    /*
     * See big comment above, before call to pl_base64_decode_4to3.
     * Here we check if we error'd out of loop, and allow for the case
     * that we are processing the last interesting token.  If the routine
     * which should handle padding characters also fails, then we just
     * have bad input and give up.
     */
    if (n < 0) {
        n = pl_base64_decode_token(token, out);
        if (n < 0)
            return PR_FAILURE;

        out += n;
    }

    /*
     * As explained above, we can get here with more input remaining, but
     * it should be all characters we do not care about (i.e. would be
     * ignored when transferring from "in" to "token" in loop above,
     * except here we choose to ignore extraneous pad characters, too).
     * Swallow it, performing that check.  If we find more characters that
     * we would expect to decode, something is wrong.
     */
    while (length > 0) {
        if (pl_base64_codetovaluep1(*in) > 0)
            return PR_FAILURE;
        in++;
        length--;
    }

    /* Record the length of decoded data we have left in output_buffer. */
    data->output_length = (PRUint32)(out - data->output_buffer);
    return PR_SUCCESS;
}

/*
 * Flush any remaining buffered characters.  Given well-formed input,
 * this will have nothing to do.  If the input was missing the padding
 * characters at the end, though, there could be 1-3 characters left
 * behind -- we will tolerate that by adding the padding for them.
 */
static PRStatus
pl_base64_decode_flush(PLBase64Decoder *data)
{
    int count;

    /*
     * If no remaining characters, or all are padding (also not well-formed
     * input, but again, be tolerant), then nothing more to do.  (And, that
     * is considered successful.)
     */
    if (data->token_size == 0 || data->token[0] == B64_PAD)
        return PR_SUCCESS;

    /*
     * Assume we have all the interesting input except for some expected
     * padding characters.  Add them and decode the resulting token.
     */
    while (data->token_size < 4)
        data->token[data->token_size++] = B64_PAD;

    data->token_size = 0; /* so a subsequent flush call is a no-op */

    count = pl_base64_decode_token(data->token,
                                   data->output_buffer + data->output_length);
    if (count < 0)
        return PR_FAILURE;

    /*
     * If there is an output function, call it with this last bit of data.
     * Otherwise we are doing all buffered output, and the decoded bytes
     * are now there, we just need to reflect that in the length.
     */
    if (data->output_fn != NULL) {
        PRInt32 output_result;

        PR_ASSERT(data->output_length == 0);
        output_result = data->output_fn(data->output_arg,
                                        data->output_buffer,
                                        (PRInt32)count);
        if (output_result < 0)
            return PR_FAILURE;
    } else {
        data->output_length += count;
    }

    return PR_SUCCESS;
}

/*
 * The maximum space needed to hold the output of the decoder given
 * input data of length "size".
 */
static PRUint32
PL_Base64MaxDecodedLength(PRUint32 size)
{
    return size * 0.75;
}

/*
 * A distinct internal creation function for the buffer version to use.
 * (It does not want to specify an output_fn, and we want the normal
 * Create function to require that.)  If more common initialization
 * of the decoding context needs to be done, it should be done *here*.
 */
static PLBase64Decoder *
pl_base64_create_decoder(void)
{
    return PR_NEWZAP(PLBase64Decoder);
}

/*
 * Function to start a base64 decoding context.
 * An "output_fn" is required; the "output_arg" parameter to that is optional.
 */
static PLBase64Decoder *
PL_CreateBase64Decoder(PRInt32 (*output_fn)(void *, const unsigned char *,
                                            PRInt32),
                       void *output_arg)
{
    PLBase64Decoder *data;

    if (output_fn == NULL) {
        PR_SetError(PR_INVALID_ARGUMENT_ERROR, 0);
        return NULL;
    }

    data = pl_base64_create_decoder();
    if (data != NULL) {
        data->output_fn = output_fn;
        data->output_arg = output_arg;
    }
    return data;
}

/*
 * Push data through the decoder, causing the output_fn (provided to Create)
 * to be called with the decoded data.
 */
static PRStatus
PL_UpdateBase64Decoder(PLBase64Decoder *data, const char *buffer,
                       PRUint32 size)
{
    PRUint32 need_length;
    PRStatus status;

    /* XXX Should we do argument checking only in debug build? */
    if (data == NULL || buffer == NULL || size == 0) {
        PR_SetError(PR_INVALID_ARGUMENT_ERROR, 0);
        return PR_FAILURE;
    }

    /*
     * How much space could this update need for decoding?
     */
    need_length = PL_Base64MaxDecodedLength(size + data->token_size);

    /*
     * Make sure we have at least that much.  If not, (re-)allocate.
     */
    if (need_length > data->output_buflen) {
        unsigned char *output_buffer = data->output_buffer;

        if (output_buffer != NULL)
            output_buffer = (unsigned char *)PR_Realloc(output_buffer,
                                                        need_length);
        else
            output_buffer = (unsigned char *)PR_Malloc(need_length);

        if (output_buffer == NULL)
            return PR_FAILURE;

        data->output_buffer = output_buffer;
        data->output_buflen = need_length;
    }

    /* There should not have been any leftover output data in the buffer. */
    PR_ASSERT(data->output_length == 0);
    data->output_length = 0;

    status = pl_base64_decode_buffer(data, (const unsigned char *)buffer,
                                     size);

    /* Now that we have some decoded data, write it. */
    if (status == PR_SUCCESS && data->output_length > 0) {
        PRInt32 output_result;

        PR_ASSERT(data->output_fn != NULL);
        output_result = data->output_fn(data->output_arg,
                                        data->output_buffer,
                                        (PRInt32)data->output_length);
        if (output_result < 0)
            status = PR_FAILURE;
    }

    data->output_length = 0;
    return status;
}

/*
 * When you're done decoding, call this to free the data.  If "abort_p"
 * is false, then calling this may cause the output_fn to be called
 * one last time (as the last buffered data is flushed out).
 */
static PRStatus
PL_DestroyBase64Decoder(PLBase64Decoder *data, PRBool abort_p)
{
    PRStatus status = PR_SUCCESS;

    /* XXX Should we do argument checking only in debug build? */
    if (data == NULL) {
        PR_SetError(PR_INVALID_ARGUMENT_ERROR, 0);
        return PR_FAILURE;
    }

    /* Flush out the last few buffered characters. */
    if (!abort_p)
        status = pl_base64_decode_flush(data);

    if (data->output_buffer != NULL)
        PR_Free(data->output_buffer);
    PR_Free(data);

    return status;
}

/*
 * Perform base64 decoding from an input buffer to an output buffer.
 * The output buffer can be provided (as "dest"); you can also pass in
 * a NULL and this function will allocate a buffer large enough for you,
 * and return it.  If you do provide the output buffer, you must also
 * provide the maximum length of that buffer (as "maxdestlen").
 * The actual decoded length of output will be returned to you in
 * "output_destlen".
 *
 * Return value is NULL on error, the output buffer (allocated or provided)
 * otherwise.
 */
static unsigned char *
PL_Base64DecodeBuffer(const char *src, PRUint32 srclen, unsigned char *dest,
                      PRUint32 maxdestlen, PRUint32 *output_destlen)
{
    PRUint32 need_length;
    unsigned char *output_buffer = NULL;
    PLBase64Decoder *data = NULL;
    PRStatus status;

    PR_ASSERT(srclen > 0);
    if (srclen == 0) {
        PR_SetError(PR_INVALID_ARGUMENT_ERROR, 0);
        return NULL;
    }

    /*
     * How much space could we possibly need for decoding this input?
     */
    need_length = PL_Base64MaxDecodedLength(srclen);

    /*
     * Make sure we have at least that much, if output buffer provided.
     * If no output buffer provided, then we allocate that much.
     */
    if (dest != NULL) {
        PR_ASSERT(maxdestlen >= need_length);
        if (maxdestlen < need_length) {
            PR_SetError(PR_BUFFER_OVERFLOW_ERROR, 0);
            goto loser;
        }
        output_buffer = dest;
    } else {
        output_buffer = (unsigned char *)PR_Malloc(need_length);
        if (output_buffer == NULL)
            goto loser;
        maxdestlen = need_length;
    }

    data = pl_base64_create_decoder();
    if (data == NULL)
        goto loser;

    data->output_buflen = maxdestlen;
    data->output_buffer = output_buffer;

    status = pl_base64_decode_buffer(data, (const unsigned char *)src,
                                     srclen);

    /*
     * We do not wait for Destroy to flush, because Destroy will also
     * get rid of our decoder context, which we need to look at first!
     */
    if (status == PR_SUCCESS)
        status = pl_base64_decode_flush(data);

    /* Must clear this or Destroy will free it. */
    data->output_buffer = NULL;

    if (status == PR_SUCCESS) {
        *output_destlen = data->output_length;
        status = PL_DestroyBase64Decoder(data, PR_FALSE);
        data = NULL;
        if (status == PR_FAILURE)
            goto loser;
        return output_buffer;
    }

loser:
    if (dest == NULL && output_buffer != NULL)
        PR_Free(output_buffer);
    if (data != NULL)
        (void)PL_DestroyBase64Decoder(data, PR_TRUE);
    return NULL;
}

/*
 * XXX End of base64 decoding code to be moved into NSPR.
 ********************************************************
 */

/*
 * This is the beginning of the NSS cover functions.  These will
 * provide the interface we want to expose as NSS-ish.  For example,
 * they will operate on our Items, do any special handling or checking
 * we want to do, etc.
 */

PR_BEGIN_EXTERN_C

/*
 * A boring cover structure for now.  Perhaps someday it will include
 * some more interesting fields.
 */
struct NSSBase64DecoderStr {
    PLBase64Decoder *pl_data;
};

PR_END_EXTERN_C

/*
 * Function to start a base64 decoding context.
 */
NSSBase64Decoder *
NSSBase64Decoder_Create(PRInt32 (*output_fn)(void *, const unsigned char *,
                                             PRInt32),
                        void *output_arg)
{
    PLBase64Decoder *pl_data;
    NSSBase64Decoder *nss_data;

    nss_data = PORT_ZNew(NSSBase64Decoder);
    if (nss_data == NULL)
        return NULL;

    pl_data = PL_CreateBase64Decoder(output_fn, output_arg);
    if (pl_data == NULL) {
        PORT_Free(nss_data);
        return NULL;
    }

    nss_data->pl_data = pl_data;
    return nss_data;
}

/*
 * Push data through the decoder, causing the output_fn (provided to Create)
 * to be called with the decoded data.
 */
SECStatus
NSSBase64Decoder_Update(NSSBase64Decoder *data, const char *buffer,
                        PRUint32 size)
{
    PRStatus pr_status;

    /* XXX Should we do argument checking only in debug build? */
    if (data == NULL) {
        PORT_SetError(SEC_ERROR_INVALID_ARGS);
        return SECFailure;
    }

    pr_status = PL_UpdateBase64Decoder(data->pl_data, buffer, size);
    if (pr_status == PR_FAILURE)
        return SECFailure;

    return SECSuccess;
}

/*
 * When you're done decoding, call this to free the data.  If "abort_p"
 * is false, then calling this may cause the output_fn to be called
 * one last time (as the last buffered data is flushed out).
 */
SECStatus
NSSBase64Decoder_Destroy(NSSBase64Decoder *data, PRBool abort_p)
{
    PRStatus pr_status;

    /* XXX Should we do argument checking only in debug build? */
    if (data == NULL) {
        PORT_SetError(SEC_ERROR_INVALID_ARGS);
        return SECFailure;
    }

    pr_status = PL_DestroyBase64Decoder(data->pl_data, abort_p);

    PORT_Free(data);

    if (pr_status == PR_FAILURE)
        return SECFailure;

    return SECSuccess;
}

/*
 * Perform base64 decoding from an ascii string "inStr" to an Item.
 * The length of the input must be provided as "inLen".  The Item
 * may be provided (as "outItemOpt"); you can also pass in a NULL
 * and the Item will be allocated for you.
 *
 * In any case, the data within the Item will be allocated for you.
 * All allocation will happen out of the passed-in "arenaOpt", if non-NULL.
 * If "arenaOpt" is NULL, standard allocation (heap) will be used and
 * you will want to free the result via SECITEM_FreeItem.
 *
 * Return value is NULL on error, the Item (allocated or provided) otherwise.
 */
SECItem *
NSSBase64_DecodeBuffer(PLArenaPool *arenaOpt, SECItem *outItemOpt,
                       const char *inStr, unsigned int inLen)
{
    SECItem *out_item = NULL;
    PRUint32 max_out_len = 0;
    void *mark = NULL;
    unsigned char *dummy = NULL;

    if ((outItemOpt != NULL && outItemOpt->data != NULL) || inLen == 0) {
        PORT_SetError(SEC_ERROR_INVALID_ARGS);
        return NULL;
    }

    if (arenaOpt != NULL)
        mark = PORT_ArenaMark(arenaOpt);

    max_out_len = PL_Base64MaxDecodedLength(inLen);
    if (max_out_len == 0) {
        goto loser;
    }
    out_item = SECITEM_AllocItem(arenaOpt, outItemOpt, max_out_len);
    if (out_item == NULL) {
        goto loser;
    }

    dummy = PL_Base64DecodeBuffer(inStr, inLen, out_item->data,
                                  max_out_len, &out_item->len);
    if (dummy == NULL) {
        goto loser;
    }
    if (arenaOpt != NULL) {
        PORT_ArenaUnmark(arenaOpt, mark);
    }
    return out_item;

loser:
    if (arenaOpt != NULL) {
        PORT_ArenaRelease(arenaOpt, mark);
        if (outItemOpt != NULL) {
            outItemOpt->data = NULL;
            outItemOpt->len = 0;
        }
    } else if (dummy == NULL) {
        SECITEM_FreeItem(out_item, (PRBool)(outItemOpt == NULL));
    }
    return NULL;
}

/*
 * XXX Everything below is deprecated.  If you add new stuff, put it
 * *above*, not below.
 */

/*
 * XXX The following "ATOB" functions are provided for backward compatibility
 * with current code.  They should be considered strongly deprecated.
 * When we can convert all our code over to using the new NSSBase64Decoder_
 * functions defined above, we should get rid of these altogether.  (Remove
 * protoypes from base64.h as well -- actually, remove that file completely).
 * If someone thinks either of these functions provides such a very useful
 * interface (though, as shown, the same functionality can already be
 * obtained by calling NSSBase64_DecodeBuffer directly), fine -- but then
 * that API should be provided with a nice new NSSFoo name and using
 * appropriate types, etc.
 */

#include "base64.h"

/*
** Return an PORT_Alloc'd string which is the base64 decoded version
** of the input string; set *lenp to the length of the returned data.
*/
unsigned char *
ATOB_AsciiToData(const char *string, unsigned int *lenp)
{
    SECItem binary_item, *dummy;

    binary_item.data = NULL;
    binary_item.len = 0;

    dummy = NSSBase64_DecodeBuffer(NULL, &binary_item, string,
                                   (PRUint32)PORT_Strlen(string));
    if (dummy == NULL)
        return NULL;

    PORT_Assert(dummy == &binary_item);

    *lenp = dummy->len;
    return dummy->data;
}

/*
** Convert from ascii to binary encoding of an item.
*/
SECStatus
ATOB_ConvertAsciiToItem(SECItem *binary_item, const char *ascii)
{
    SECItem *dummy;

    if (binary_item == NULL) {
        PORT_SetError(SEC_ERROR_INVALID_ARGS);
        return SECFailure;
    }

    /*
     * XXX Would prefer to assert here if data is non-null (actually,
     * don't need to, just let NSSBase64_DecodeBuffer do it), so as to
     * to catch unintended memory leaks, but callers are not clean in
     * this respect so we need to explicitly clear here to avoid the
     * assert in NSSBase64_DecodeBuffer.
     */
    binary_item->data = NULL;
    binary_item->len = 0;

    dummy = NSSBase64_DecodeBuffer(NULL, binary_item, ascii,
                                   (PRUint32)PORT_Strlen(ascii));

    if (dummy == NULL)
        return SECFailure;

    return SECSuccess;
}