/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

/*
 * Interface to the OCSP implementation.
 */

#ifndef _OCSP_H_
#define _OCSP_H_

#include "plarena.h"
#include "seccomon.h"
#include "secoidt.h"
#include "keythi.h"
#include "certt.h"
#include "ocspt.h"

/************************************************************************/
SEC_BEGIN_PROTOS

/*
 * This function registers the HttpClient with whose functions the
 * HttpClientFcn structure has been populated as the default Http
 * client.
 *
 * The function table must be a global object.
 * The caller must ensure that NSS will be able to call
 * the registered functions for the lifetime of the process.
 */
extern SECStatus
SEC_RegisterDefaultHttpClient(const SEC_HttpClientFcn *fcnTable);

/*
 * This function obtains the HttpClient which has been registered
 * by an earlier call to SEC_RegisterDefaultHttpClient.
 */
extern const SEC_HttpClientFcn *
SEC_GetRegisteredHttpClient(void);

/*
 * Sets parameters that control NSS' internal OCSP cache.
 * maxCacheEntries, special varlues are:
 *   -1 disable cache
 *   0 unlimited cache entries
 * minimumSecondsToNextFetchAttempt:
 *   whenever an OCSP request was attempted or completed over the network,
 *   wait at least this number of seconds before trying to fetch again.
 * maximumSecondsToNextFetchAttempt:
 *   this is the maximum age of a cached response we allow, until we try
 *   to fetch an updated response, even if the OCSP responder expects
 *   that newer information update will not be available yet.
 */
extern SECStatus
CERT_OCSPCacheSettings(PRInt32 maxCacheEntries,
                       PRUint32 minimumSecondsToNextFetchAttempt,
                       PRUint32 maximumSecondsToNextFetchAttempt);

/*
 * Set the desired behaviour on OCSP failures.
 * See definition of ocspFailureMode for allowed choices.
 */
extern SECStatus
CERT_SetOCSPFailureMode(SEC_OcspFailureMode ocspFailureMode);

/*
 * Configure the maximum time NSS will wait for an OCSP response.
 */
extern SECStatus
CERT_SetOCSPTimeout(PRUint32 seconds);

/*
 * Removes all items currently stored in the OCSP cache.
 */
extern SECStatus
CERT_ClearOCSPCache(void);

/*
 * FUNCTION: CERT_EnableOCSPChecking
 *   Turns on OCSP checking for the given certificate database.
 * INPUTS:
 *   CERTCertDBHandle *handle
 *     Certificate database for which OCSP checking will be enabled.
 * RETURN:
 *   Returns SECFailure if an error occurred (likely only problem
 *   allocating memory); SECSuccess otherwise.
 */
extern SECStatus
CERT_EnableOCSPChecking(CERTCertDBHandle *handle);

/*
 * FUNCTION: CERT_DisableOCSPChecking
 *   Turns off OCSP checking for the given certificate database.
 *   This routine disables OCSP checking.  Though it will return
 *   SECFailure if OCSP checking is not enabled, it is "safe" to
 *   call it that way and just ignore the return value, if it is
 *   easier to just call it than to "remember" whether it is enabled.
 * INPUTS:
 *   CERTCertDBHandle *handle
 *     Certificate database for which OCSP checking will be disabled.
 * RETURN:
 *   Returns SECFailure if an error occurred (usually means that OCSP
 *   checking was not enabled or status contexts were not initialized --
 *   error set will be SEC_ERROR_OCSP_NOT_ENABLED); SECSuccess otherwise.
 */
extern SECStatus
CERT_DisableOCSPChecking(CERTCertDBHandle *handle);

/*
 * FUNCTION: CERT_SetOCSPDefaultResponder
 *   Specify the location and cert of the default responder.
 *   If OCSP checking is already enabled *and* use of a default responder
 *   is also already enabled, all OCSP checking from now on will go directly
 *   to the specified responder.  If OCSP checking is not enabled, or if
 *   it is but use of a default responder is not enabled, the information
 *   will be recorded and take effect whenever both are enabled.
 * INPUTS:
 *   CERTCertDBHandle *handle
 *     Cert database on which OCSP checking should use the default responder.
 *   const char *url
 *     The location of the default responder (e.g. "http://foo.com:80/ocsp")
 *     Note that the location will not be tested until the first attempt
 *     to send a request there.
 *   const char *name
 *     The nickname of the cert to trust (expected) to sign the OCSP responses.
 *     If the corresponding cert cannot be found, SECFailure is returned.
 * RETURN:
 *   Returns SECFailure if an error occurred; SECSuccess otherwise.
 *   The most likely error is that the cert for "name" could not be found
 *   (probably SEC_ERROR_UNKNOWN_CERT).  Other errors are low-level (no memory,
 *   bad database, etc.).
 */
extern SECStatus
CERT_SetOCSPDefaultResponder(CERTCertDBHandle *handle,
                             const char *url, const char *name);

/*
 * FUNCTION: CERT_EnableOCSPDefaultResponder
 *   Turns on use of a default responder when OCSP checking.
 *   If OCSP checking is already enabled, this will make subsequent checks
 *   go directly to the default responder.  (The location of the responder
 *   and the nickname of the responder cert must already be specified.)
 *   If OCSP checking is not enabled, this will be recorded and take effect
 *   whenever it is enabled.
 * INPUTS:
 *   CERTCertDBHandle *handle
 *     Cert database on which OCSP checking should use the default responder.
 * RETURN:
 *   Returns SECFailure if an error occurred; SECSuccess otherwise.
 *   No errors are especially likely unless the caller did not previously
 *   perform a successful call to SetOCSPDefaultResponder (in which case
 *   the error set will be SEC_ERROR_OCSP_NO_DEFAULT_RESPONDER).
 */
extern SECStatus
CERT_EnableOCSPDefaultResponder(CERTCertDBHandle *handle);

/*
 * FUNCTION: CERT_DisableOCSPDefaultResponder
 *   Turns off use of a default responder when OCSP checking.
 *   (Does nothing if use of a default responder is not enabled.)
 * INPUTS:
 *   CERTCertDBHandle *handle
 *     Cert database on which OCSP checking should stop using a default
 *     responder.
 * RETURN:
 *   Returns SECFailure if an error occurred; SECSuccess otherwise.
 *   Errors very unlikely (like random memory corruption...).
 */
extern SECStatus
CERT_DisableOCSPDefaultResponder(CERTCertDBHandle *handle);

/* If forcePost is set, OCSP requests will only be sent using the HTTP POST
 * method. When forcePost is not set, OCSP requests will be sent using the
 * HTTP GET method, with a fallback to POST when we fail to receive a response
 * and/or when we receive an uncacheable response like "Unknown."
 *
 * The default is to use GET and fallback to POST.
 */
extern SECStatus CERT_ForcePostMethodForOCSP(PRBool forcePost);

/*
 * -------------------------------------------------------
 * The Functions above are those expected to be used by a client
 * providing OCSP status checking along with every cert verification.
 * The functions below are for OCSP testing, debugging, or clients
 * or servers performing more specialized OCSP tasks.
 * -------------------------------------------------------
 */

/*
 * FUNCTION: CERT_CreateOCSPRequest
 *   Creates a CERTOCSPRequest, requesting the status of the certs in
 *   the given list.
 * INPUTS:
 *   CERTCertList *certList
 *     A list of certs for which status will be requested.
 *     Note that all of these certificates should have the same issuer,
 *     or it's expected the response will be signed by a trusted responder.
 *     If the certs need to be broken up into multiple requests, that
 *     must be handled by the caller (and thus by having multiple calls
 *     to this routine), who knows about where the request(s) are being
 *     sent and whether there are any trusted responders in place.
 *   PRTime time
 *     Indicates the time for which the certificate status is to be
 *     determined -- this may be used in the search for the cert's issuer
 *     but has no effect on the request itself.
 *   PRBool addServiceLocator
 *     If true, the Service Locator extension should be added to the
 *     single request(s) for each cert.
 *   CERTCertificate *signerCert
 *     If non-NULL, means sign the request using this cert.  Otherwise,
 *     do not sign.
 *     XXX note that request signing is not yet supported; see comment in code
 * RETURN:
 *   A pointer to a CERTOCSPRequest structure containing an OCSP request
 *   for the cert list.  On error, null is returned, with an error set
 *   indicating the reason.  This is likely SEC_ERROR_UNKNOWN_ISSUER.
 *   (The issuer is needed to create a request for the certificate.)
 *   Other errors are low-level problems (no memory, bad database, etc.).
 */
extern CERTOCSPRequest *
CERT_CreateOCSPRequest(CERTCertList *certList, PRTime time,
                       PRBool addServiceLocator,
                       CERTCertificate *signerCert);

/*
 * FUNCTION: CERT_AddOCSPAcceptableResponses
 *   Add the AcceptableResponses extension to an OCSP Request.
 * INPUTS:
 *   CERTOCSPRequest *request
 *     The request to which the extension should be added.
 *   SECOidTag responseType0, ...
 *     A list (of one or more) of SECOidTag -- each of the response types
 *     to be added.  The last OID *must* be SEC_OID_PKIX_OCSP_BASIC_RESPONSE.
 *     (This marks the end of the list, and it must be specified because a
 *     client conforming to the OCSP standard is required to handle the basic
 *     response type.)  The OIDs are not checked in any way.
 * RETURN:
 *   SECSuccess if the extension is added; SECFailure if anything goes wrong.
 *   All errors are internal or low-level problems (e.g. no memory).
 */
extern SECStatus
CERT_AddOCSPAcceptableResponses(CERTOCSPRequest *request,
                                SECOidTag responseType0, ...);

/*
 * FUNCTION: CERT_EncodeOCSPRequest
 *   DER encodes an OCSP Request, possibly adding a signature as well.
 *   XXX Signing is not yet supported, however; see comments in code.
 * INPUTS:
 *   PLArenaPool *arena
 *     The return value is allocated from here.
 *     If a NULL is passed in, allocation is done from the heap instead.
 *   CERTOCSPRequest *request
 *     The request to be encoded.
 *   void *pwArg
 *     Pointer to argument for password prompting, if needed.  (Definitely
 *     not needed if not signing.)
 * RETURN:
 *   Returns a NULL on error and a pointer to the SECItem with the
 *   encoded value otherwise.  Any error is likely to be low-level
 *   (e.g. no memory).
 */
extern SECItem *
CERT_EncodeOCSPRequest(PLArenaPool *arena, CERTOCSPRequest *request,
                       void *pwArg);

/*
 * FUNCTION: CERT_DecodeOCSPRequest
 *   Decode a DER encoded OCSP Request.
 * INPUTS:
 *   SECItem *src
 *     Pointer to a SECItem holding DER encoded OCSP Request.
 * RETURN:
 *   Returns a pointer to a CERTOCSPRequest containing the decoded request.
 *   On error, returns NULL.  Most likely error is trouble decoding
 *   (SEC_ERROR_OCSP_MALFORMED_REQUEST), or low-level problem (no memory).
 */
extern CERTOCSPRequest *
CERT_DecodeOCSPRequest(const SECItem *src);

/*
 * FUNCTION: CERT_DestroyOCSPRequest
 *   Frees an OCSP Request structure.
 * INPUTS:
 *   CERTOCSPRequest *request
 *     Pointer to CERTOCSPRequest to be freed.
 * RETURN:
 *   No return value; no errors.
 */
extern void
CERT_DestroyOCSPRequest(CERTOCSPRequest *request);

/*
 * FUNCTION: CERT_DecodeOCSPResponse
 *   Decode a DER encoded OCSP Response.
 * INPUTS:
 *   SECItem *src
 *     Pointer to a SECItem holding DER encoded OCSP Response.
 * RETURN:
 *   Returns a pointer to a CERTOCSPResponse (the decoded OCSP Response);
 *   the caller is responsible for destroying it.  Or NULL if error (either
 *   response could not be decoded (SEC_ERROR_OCSP_MALFORMED_RESPONSE),
 *   it was of an unexpected type (SEC_ERROR_OCSP_UNKNOWN_RESPONSE_TYPE),
 *   or a low-level or internal error occurred).
 */
extern CERTOCSPResponse *
CERT_DecodeOCSPResponse(const SECItem *src);

/*
 * FUNCTION: CERT_DestroyOCSPResponse
 *   Frees an OCSP Response structure.
 * INPUTS:
 *   CERTOCSPResponse *request
 *     Pointer to CERTOCSPResponse to be freed.
 * RETURN:
 *   No return value; no errors.
 */
extern void
CERT_DestroyOCSPResponse(CERTOCSPResponse *response);

/*
 * FUNCTION: CERT_GetEncodedOCSPResponse
 *   Creates and sends a request to an OCSP responder, then reads and
 *   returns the (encoded) response.
 * INPUTS:
 *   PLArenaPool *arena
 *     Pointer to arena from which return value will be allocated.
 *     If NULL, result will be allocated from the heap (and thus should
 *     be freed via SECITEM_FreeItem).
 *   CERTCertList *certList
 *     A list of certs for which status will be requested.
 *     Note that all of these certificates should have the same issuer,
 *     or it's expected the response will be signed by a trusted responder.
 *     If the certs need to be broken up into multiple requests, that
 *     must be handled by the caller (and thus by having multiple calls
 *     to this routine), who knows about where the request(s) are being
 *     sent and whether there are any trusted responders in place.
 *   const char *location
 *     The location of the OCSP responder (a URL).
 *   PRTime time
 *     Indicates the time for which the certificate status is to be
 *     determined -- this may be used in the search for the cert's issuer
 *     but has no other bearing on the operation.
 *   PRBool addServiceLocator
 *     If true, the Service Locator extension should be added to the
 *     single request(s) for each cert.
 *   CERTCertificate *signerCert
 *     If non-NULL, means sign the request using this cert.  Otherwise,
 *     do not sign.
 *   void *pwArg
 *     Pointer to argument for password prompting, if needed.  (Definitely
 *     not needed if not signing.)
 * OUTPUTS:
 *   CERTOCSPRequest **pRequest
 *     Pointer in which to store the OCSP request created for the given
 *     list of certificates.  It is only filled in if the entire operation
 *     is successful and the pointer is not null -- and in that case the
 *     caller is then reponsible for destroying it.
 * RETURN:
 *   Returns a pointer to the SECItem holding the response.
 *   On error, returns null with error set describing the reason:
 *	SEC_ERROR_UNKNOWN_ISSUER
 *	SEC_ERROR_CERT_BAD_ACCESS_LOCATION
 *	SEC_ERROR_OCSP_BAD_HTTP_RESPONSE
 *   Other errors are low-level problems (no memory, bad database, etc.).
 */
extern SECItem *
CERT_GetEncodedOCSPResponse(PLArenaPool *arena, CERTCertList *certList,
                            const char *location, PRTime time,
                            PRBool addServiceLocator,
                            CERTCertificate *signerCert, void *pwArg,
                            CERTOCSPRequest **pRequest);

/*
 * FUNCTION: CERT_VerifyOCSPResponseSignature
 *   Check the signature on an OCSP Response.  Will also perform a
 *   verification of the signer's certificate.  Note, however, that a
 *   successful verification does not make any statement about the
 *   signer's *authority* to provide status for the certificate(s),
 *   that must be checked individually for each certificate.
 * INPUTS:
 *   CERTOCSPResponse *response
 *     Pointer to response structure with signature to be checked.
 *   CERTCertDBHandle *handle
 *     Pointer to CERTCertDBHandle for certificate DB to use for verification.
 *   void *pwArg
 *     Pointer to argument for password prompting, if needed.
 *   CERTCertificate *issuerCert
 *     Issuer of the certificate that generated the OCSP request.
 * OUTPUTS:
 *   CERTCertificate **pSignerCert
 *     Pointer in which to store signer's certificate; only filled-in if
 *     non-null.
 * RETURN:
 *   Returns SECSuccess when signature is valid, anything else means invalid.
 *   Possible errors set:
 *	SEC_ERROR_OCSP_MALFORMED_RESPONSE - unknown type of ResponderID
 *	SEC_ERROR_INVALID_TIME - bad format of "ProducedAt" time
 *	SEC_ERROR_UNKNOWN_SIGNER - signer's cert could not be found
 *	SEC_ERROR_BAD_SIGNATURE - the signature did not verify
 *   Other errors are any of the many possible failures in cert verification
 *   (e.g. SEC_ERROR_REVOKED_CERTIFICATE, SEC_ERROR_UNTRUSTED_ISSUER) when
 *   verifying the signer's cert, or low-level problems (no memory, etc.)
 */
extern SECStatus
CERT_VerifyOCSPResponseSignature(CERTOCSPResponse *response,
                                 CERTCertDBHandle *handle, void *pwArg,
                                 CERTCertificate **pSignerCert,
                                 CERTCertificate *issuerCert);

/*
 * FUNCTION: CERT_GetOCSPAuthorityInfoAccessLocation
 *   Get the value of the URI of the OCSP responder for the given cert.
 *   This is found in the (optional) Authority Information Access extension
 *   in the cert.
 * INPUTS:
 *   CERTCertificate *cert
 *     The certificate being examined.
 * RETURN:
 *   char *
 *     A copy of the URI for the OCSP method, if found.  If either the
 *     extension is not present or it does not contain an entry for OCSP,
 *     SEC_ERROR_EXTENSION_NOT_FOUND will be set and a NULL returned.
 *     Any other error will also result in a NULL being returned.
 *
 *     This result should be freed (via PORT_Free) when no longer in use.
 */
extern char *
CERT_GetOCSPAuthorityInfoAccessLocation(const CERTCertificate *cert);

/*
 * FUNCTION: CERT_RegisterAlternateOCSPAIAInfoCallBack
 *   This function serves two purposes.
 *   1) It registers the address of a callback function that will be
 *   called for certs that have no OCSP AIA extension, to see if the
 *   callback wishes to supply an alternative URL for such an OCSP inquiry.
 *   2) It outputs the previously registered function's address to the
 *   address supplied by the caller, unless that is NULL.
 *   The registered callback function returns NULL, or an allocated string
 *   that may be subsequently freed by calling PORT_Free().
 * RETURN:
 *   SECSuccess or SECFailure (if the library is not yet intialized)
 */
extern SECStatus
CERT_RegisterAlternateOCSPAIAInfoCallBack(
    CERT_StringFromCertFcn newCallback,
    CERT_StringFromCertFcn *oldCallback);

/*
 * FUNCTION: CERT_ParseURL
 *   Parse a URI into hostname, port, and path.  The scheme in the URI must
 *   be "http".
 * INPUTS:
 *   const char *url
 *     The URI to be parsed
 * OUTPUTS:
 *   char **pHostname
 *     Pointer to store the hostname obtained from the URI.
 *     This result should be freed (via PORT_Free) when no longer in use.
 *   PRUint16 *pPort
 *     Pointer to store the port number obtained from the URI.
 *   char **pPath
 *     Pointer to store the path obtained from the URI.
 *     This result should be freed (via PORT_Free) when no longer in use.
 * RETURN:
 *   Returns SECSuccess when parsing was successful. Returns SECFailure when
 *   problems were encountered.
 */
extern SECStatus
CERT_ParseURL(const char *url, char **pHostname, PRUint16 *pPort, char **pPath);

/*
 * FUNCTION: CERT_CheckOCSPStatus
 *   Checks the status of a certificate via OCSP.  Will only check status for
 *   a certificate that has an AIA (Authority Information Access) extension
 *   for OCSP *or* when a "default responder" is specified and enabled.
 *   (If no AIA extension for OCSP and no default responder in place, the
 *   cert is considered to have a good status and SECSuccess is returned.)
 * INPUTS:
 *   CERTCertDBHandle *handle
 *     certificate DB of the cert that is being checked
 *   CERTCertificate *cert
 *     the certificate being checked
 *   XXX in the long term also need a boolean parameter that specifies
 *	whether to check the cert chain, as well; for now we check only
 *	the leaf (the specified certificate)
 *   PRTime time
 *     time for which status is to be determined
 *   void *pwArg
 *     argument for password prompting, if needed
 * RETURN:
 *   Returns SECSuccess if an approved OCSP responder "knows" the cert
 *   *and* returns a non-revoked status for it; SECFailure otherwise,
 *   with an error set describing the reason:
 *
 *	SEC_ERROR_OCSP_BAD_HTTP_RESPONSE
 *	SEC_ERROR_OCSP_FUTURE_RESPONSE
 *	SEC_ERROR_OCSP_MALFORMED_REQUEST
 *	SEC_ERROR_OCSP_MALFORMED_RESPONSE
 *	SEC_ERROR_OCSP_OLD_RESPONSE
 *	SEC_ERROR_OCSP_REQUEST_NEEDS_SIG
 *	SEC_ERROR_OCSP_SERVER_ERROR
 *	SEC_ERROR_OCSP_TRY_SERVER_LATER
 *	SEC_ERROR_OCSP_UNAUTHORIZED_REQUEST
 *	SEC_ERROR_OCSP_UNAUTHORIZED_RESPONSE
 *	SEC_ERROR_OCSP_UNKNOWN_CERT
 *	SEC_ERROR_OCSP_UNKNOWN_RESPONSE_STATUS
 *	SEC_ERROR_OCSP_UNKNOWN_RESPONSE_TYPE
 *
 *	SEC_ERROR_BAD_SIGNATURE
 *	SEC_ERROR_CERT_BAD_ACCESS_LOCATION
 *	SEC_ERROR_INVALID_TIME
 *	SEC_ERROR_REVOKED_CERTIFICATE
 *	SEC_ERROR_UNKNOWN_ISSUER
 *	SEC_ERROR_UNKNOWN_SIGNER
 *
 *   Other errors are any of the many possible failures in cert verification
 *   (e.g. SEC_ERROR_REVOKED_CERTIFICATE, SEC_ERROR_UNTRUSTED_ISSUER) when
 *   verifying the signer's cert, or low-level problems (error allocating
 *   memory, error performing ASN.1 decoding, etc.).
 */
extern SECStatus
CERT_CheckOCSPStatus(CERTCertDBHandle *handle, CERTCertificate *cert,
                     PRTime time, void *pwArg);

/*
 * FUNCTION: CERT_CacheOCSPResponseFromSideChannel
 *   First, this function checks the OCSP cache to see if a good response
 *   for the given certificate already exists. If it does, then the function
 *   returns successfully.
 *
 *   If not, then it validates that the given OCSP response is a valid,
 *   good response for the given certificate and inserts it into the
 *   cache.
 *
 *   This function is intended for use when OCSP responses are provided via a
 *   side-channel, i.e. TLS OCSP stapling (a.k.a. the status_request extension).
 *
 * INPUTS:
 *   CERTCertDBHandle *handle
 *     certificate DB of the cert that is being checked
 *   CERTCertificate *cert
 *     the certificate being checked
 *   PRTime time
 *     time for which status is to be determined
 *   SECItem *encodedResponse
 *     the DER encoded bytes of the OCSP response
 *   void *pwArg
 *     argument for password prompting, if needed
 * RETURN:
 *   SECSuccess if the cert was found in the cache, or if the OCSP response was
 *   found to be valid and inserted into the cache. SECFailure otherwise.
 */
extern SECStatus
CERT_CacheOCSPResponseFromSideChannel(CERTCertDBHandle *handle,
                                      CERTCertificate *cert,
                                      PRTime time,
                                      const SECItem *encodedResponse,
                                      void *pwArg);

/*
 * FUNCTION: CERT_GetOCSPStatusForCertID
 *  Returns the OCSP status contained in the passed in parameter response
 *  that corresponds to the certID passed in.
 * INPUTS:
 *  CERTCertDBHandle *handle
 *    certificate DB of the cert that is being checked
 *  CERTOCSPResponse *response
 *    the OCSP response we want to retrieve status from.
 *  CERTOCSPCertID *certID
 *    the ID we want to look for from the response.
 *  CERTCertificate *signerCert
 *    the certificate that was used to sign the OCSP response.
 *    must be obtained via a call to CERT_VerifyOCSPResponseSignature.
 *  PRTime time
 *    The time at which we're checking the status for.
 *  RETURN:
 *    Return values are the same as those for CERT_CheckOCSPStatus
 */
extern SECStatus
CERT_GetOCSPStatusForCertID(CERTCertDBHandle *handle,
                            CERTOCSPResponse *response,
                            CERTOCSPCertID *certID,
                            CERTCertificate *signerCert,
                            PRTime time);

/*
 * FUNCTION CERT_GetOCSPResponseStatus
 *   Returns the response status for the response passed.
 * INPUTS:
 *   CERTOCSPResponse *response
 *     The response to query for status
 *  RETURN:
 *    Returns SECSuccess if the response has a successful status value.
 *    Otherwise it returns SECFailure and sets one of the following error
 *    codes via PORT_SetError
 *        SEC_ERROR_OCSP_MALFORMED_REQUEST
 *        SEC_ERROR_OCSP_SERVER_ERROR
 *        SEC_ERROR_OCSP_TRY_SERVER_LATER
 *        SEC_ERROR_OCSP_REQUEST_NEEDS_SIG
 *        SEC_ERROR_OCSP_UNAUTHORIZED_REQUEST
 *        SEC_ERROR_OCSP_UNKNOWN_RESPONSE_STATUS
 */
extern SECStatus
CERT_GetOCSPResponseStatus(CERTOCSPResponse *response);

/*
 * FUNCTION CERT_CreateOCSPCertID
 *  Returns the OCSP certID for the certificate passed in.
 * INPUTS:
 *  CERTCertificate *cert
 *    The certificate for which to create the certID for.
 *  PRTime time
 *    The time at which the id is requested for.  This is used
 *    to determine the appropriate issuer for the cert since
 *    the issuing CA may be an older expired certificate.
 *  RETURN:
 *    A new copy of a CERTOCSPCertID*.  The memory for this certID
 *    should be freed by calling CERT_DestroyOCSPCertID when the
 *    certID is no longer necessary.
 */
extern CERTOCSPCertID *
CERT_CreateOCSPCertID(CERTCertificate *cert, PRTime time);

/*
 * FUNCTION: CERT_DestroyOCSPCertID
 *  Frees the memory associated with the certID passed in.
 * INPUTS:
 *  CERTOCSPCertID* certID
 *    The certID that the caller no longer needs and wants to
 *    free the associated memory.
 * RETURN:
 *  SECSuccess if freeing the memory was successful.  Returns
 *  SECFailure if the memory passed in was not allocated with
 *  a call to CERT_CreateOCSPCertID.
 */
extern SECStatus
CERT_DestroyOCSPCertID(CERTOCSPCertID *certID);

extern CERTOCSPSingleResponse *
CERT_CreateOCSPSingleResponseGood(PLArenaPool *arena,
                                  CERTOCSPCertID *id,
                                  PRTime thisUpdate,
                                  const PRTime *nextUpdate);

extern CERTOCSPSingleResponse *
CERT_CreateOCSPSingleResponseUnknown(PLArenaPool *arena,
                                     CERTOCSPCertID *id,
                                     PRTime thisUpdate,
                                     const PRTime *nextUpdate);

extern CERTOCSPSingleResponse *
CERT_CreateOCSPSingleResponseRevoked(
    PLArenaPool *arena,
    CERTOCSPCertID *id,
    PRTime thisUpdate,
    const PRTime *nextUpdate,
    PRTime revocationTime,
    const CERTCRLEntryReasonCode *revocationReason);

extern SECItem *
CERT_CreateEncodedOCSPSuccessResponse(
    PLArenaPool *arena,
    CERTCertificate *responderCert,
    CERTOCSPResponderIDType responderIDType,
    PRTime producedAt,
    CERTOCSPSingleResponse **responses,
    void *wincx);

/*
 * FUNCTION: CERT_CreateEncodedOCSPErrorResponse
 *  Creates an encoded OCSP response with an error response status.
 * INPUTS:
 *  PLArenaPool *arena
 *    The return value is allocated from here.
 *    If a NULL is passed in, allocation is done from the heap instead.
 *  int error
 *    An NSS error code indicating an error response status. The error
 *    code is mapped to an OCSP response status as follows:
 *        SEC_ERROR_OCSP_MALFORMED_REQUEST -> malformedRequest
 *        SEC_ERROR_OCSP_SERVER_ERROR -> internalError
 *        SEC_ERROR_OCSP_TRY_SERVER_LATER -> tryLater
 *        SEC_ERROR_OCSP_REQUEST_NEEDS_SIG -> sigRequired
 *        SEC_ERROR_OCSP_UNAUTHORIZED_REQUEST -> unauthorized
 *    where the OCSP response status is an enumerated type defined in
 *    RFC 2560:
 *    OCSPResponseStatus ::= ENUMERATED {
 *        successful           (0),     --Response has valid confirmations
 *        malformedRequest     (1),     --Illegal confirmation request
 *        internalError        (2),     --Internal error in issuer
 *        tryLater             (3),     --Try again later
 *                                      --(4) is not used
 *        sigRequired          (5),     --Must sign the request
 *        unauthorized         (6)      --Request unauthorized
 *    }
 * RETURN:
 *   Returns a pointer to the SECItem holding the response.
 *   On error, returns null with error set describing the reason:
 *	SEC_ERROR_INVALID_ARGS
 *   Other errors are low-level problems (no memory, bad database, etc.).
 */
extern SECItem *
CERT_CreateEncodedOCSPErrorResponse(PLArenaPool *arena, int error);

/* Sends an OCSP request using the HTTP POST method to the location addressed
 * by the URL in |location| parameter. The request body will be
 * |encodedRequest|, which must be a valid encoded OCSP request. On success,
 * the server's response is returned and the caller must free it using
 * SECITEM_FreeItem. On failure, NULL is returned. No parsing or validation of
 * the HTTP response is done.
 *
 * If a default HTTP client has been registered with
 * SEC_RegisterDefaultHttpClient then that client is used. Otherwise, an
 * internal HTTP client is used.
 */
SECItem *CERT_PostOCSPRequest(PLArenaPool *arena, const char *location,
                              const SECItem *encodedRequest);

/************************************************************************/
SEC_END_PROTOS

#endif /* _OCSP_H_ */