| /* | |
| * System-dependent procedures for pppd under Solaris 2. | |
| * | |
| * Parts re-written by Adi Masputra <adi.masputra@sun.com>, based on | |
| * the original sys-svr4.c | |
| * | |
| * Copyright (c) 2000 by Sun Microsystems, Inc. | |
| * All rights reserved. | |
| * | |
| * Permission to use, copy, modify, and distribute this software and its | |
| * documentation is hereby granted, provided that the above copyright | |
| * notice appears in all copies. | |
| * | |
| * SUN MAKES NO REPRESENTATION OR WARRANTIES ABOUT THE SUITABILITY OF | |
| * THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED | |
| * TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A | |
| * PARTICULAR PURPOSE, OR NON-INFRINGEMENT. SUN SHALL NOT BE LIABLE FOR | |
| * ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR | |
| * DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES | |
| * | |
| * Copyright (c) 1995-2002 Paul Mackerras. All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * | |
| * 2. The name(s) of the authors of this software must not be used to | |
| * endorse or promote products derived from this software without | |
| * prior written permission. | |
| * | |
| * 3. Redistributions of any form whatsoever must retain the following | |
| * acknowledgment: | |
| * "This product includes software developed by Paul Mackerras | |
| * <paulus@samba.org>". | |
| * | |
| * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO | |
| * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY | |
| * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY | |
| * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN | |
| * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING | |
| * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
| * | |
| * Derived from main.c and pppd.h, which are: | |
| * | |
| * Copyright (c) 1984-2000 Carnegie Mellon University. All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in | |
| * the documentation and/or other materials provided with the | |
| * distribution. | |
| * | |
| * 3. The name "Carnegie Mellon University" must not be used to | |
| * endorse or promote products derived from this software without | |
| * prior written permission. For permission or any legal | |
| * details, please contact | |
| * Office of Technology Transfer | |
| * Carnegie Mellon University | |
| * 5000 Forbes Avenue | |
| * Pittsburgh, PA 15213-3890 | |
| * (412) 268-4387, fax: (412) 268-7395 | |
| * tech-transfer@andrew.cmu.edu | |
| * | |
| * 4. Redistributions of any form whatsoever must retain the following | |
| * acknowledgment: | |
| * "This product includes software developed by Computing Services | |
| * at Carnegie Mellon University (http://www.cmu.edu/computing/)." | |
| * | |
| * CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO | |
| * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY | |
| * AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE | |
| * FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN | |
| * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING | |
| * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
| */ | |
| #include <limits.h> | |
| #include <stdio.h> | |
| #include <stddef.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <ctype.h> | |
| #include <errno.h> | |
| #include <fcntl.h> | |
| #include <unistd.h> | |
| #include <termios.h> | |
| #ifndef CRTSCTS | |
| #include <sys/termiox.h> | |
| #endif | |
| #include <signal.h> | |
| #include <utmpx.h> | |
| #include <stropts.h> | |
| #include <sys/types.h> | |
| #include <sys/ioccom.h> | |
| #include <sys/stream.h> | |
| #include <sys/stropts.h> | |
| #include <sys/socket.h> | |
| #include <sys/sockio.h> | |
| #include <sys/sysmacros.h> | |
| #include <sys/systeminfo.h> | |
| #include <sys/dlpi.h> | |
| #include <sys/stat.h> | |
| #include <sys/mkdev.h> | |
| #include <sys/time.h> | |
| #include <net/if.h> | |
| #include <net/if_arp.h> | |
| #include <net/route.h> | |
| #include <net/ppp_defs.h> | |
| #include <net/pppio.h> | |
| #include <netinet/in.h> | |
| #ifdef SOL2 | |
| #include <sys/tihdr.h> | |
| #include <sys/tiuser.h> | |
| #include <inet/common.h> | |
| #include <inet/mib2.h> | |
| #include <sys/ethernet.h> | |
| #endif | |
| #include "pppd.h" | |
| #include "fsm.h" | |
| #include "lcp.h" | |
| #include "ipcp.h" | |
| #include "ccp.h" | |
| #if !defined(PPP_DRV_NAME) | |
| #define PPP_DRV_NAME "ppp" | |
| #endif /* !defined(PPP_DRV_NAME) */ | |
| #if !defined(PPP_DEV_NAME) | |
| #define PPP_DEV_NAME "/dev/" PPP_DRV_NAME | |
| #endif /* !defined(PPP_DEV_NAME) */ | |
| #if !defined(AHDLC_MOD_NAME) | |
| #define AHDLC_MOD_NAME "ppp_ahdl" | |
| #endif /* !defined(AHDLC_MOD_NAME) */ | |
| #if !defined(COMP_MOD_NAME) | |
| #define COMP_MOD_NAME "ppp_comp" | |
| #endif /* !defined(COMP_MOD_NAME) */ | |
| #if !defined(IP_DEV_NAME) | |
| #define IP_DEV_NAME "/dev/ip" | |
| #endif /* !defined(IP_DEV_NAME) */ | |
| #if !defined(IP_MOD_NAME) | |
| #define IP_MOD_NAME "ip" | |
| #endif /* !defined(IP_MOD_NAME) */ | |
| #if !defined(UDP_DEV_NAME) && defined(SOL2) | |
| #define UDP_DEV_NAME "/dev/udp" | |
| #endif /* !defined(UDP_DEV_NAME) && defined(SOL2) */ | |
| #if !defined(UDP6_DEV_NAME) && defined(SOL2) | |
| #define UDP6_DEV_NAME "/dev/udp6" | |
| #endif /* !defined(UDP6_DEV_NAME) && defined(SOL2) */ | |
| #if defined(SOL2) | |
| /* | |
| * "/dev/udp" is used as a multiplexor to PLINK the interface stream | |
| * under. It is used in place of "/dev/ip" since STREAMS will not let | |
| * a driver be PLINK'ed under itself, and "/dev/ip" is typically the | |
| * driver at the bottom of the tunneling interfaces stream. | |
| */ | |
| static char *mux_dev_name = UDP_DEV_NAME; | |
| #else | |
| static char *mux_dev_name = IP_DEV_NAME; | |
| #endif | |
| static int pppfd; | |
| static int fdmuxid = -1; | |
| static int ipfd; | |
| static int ipmuxid = -1; | |
| #if defined(INET6) && defined(SOL2) | |
| static int ip6fd; /* IP file descriptor */ | |
| static int ip6muxid = -1; /* Multiplexer file descriptor */ | |
| static int if6_is_up = 0; /* IPv6 interface has been marked up */ | |
| #define IN6_SOCKADDR_FROM_EUI64(s, eui64) do { \ | |
| (s)->sin6_family = AF_INET6; \ | |
| (s)->sin6_addr.s6_addr32[0] = htonl(0xfe800000); \ | |
| eui64_copy(eui64, (s)->sin6_addr.s6_addr32[2]); \ | |
| } while(0) | |
| #define _IN6_LLX_FROM_EUI64(l, s, eui64, as) do { \ | |
| s->sin6_addr.s6_addr32[0] = htonl(as); \ | |
| eui64_copy(eui64, s->sin6_addr.s6_addr32[2]); \ | |
| s->sin6_family = AF_INET6; \ | |
| l.lifr_addr.ss_family = AF_INET6; \ | |
| l.lifr_addrlen = 64; \ | |
| l.lifr_addr = laddr; \ | |
| } while (0) | |
| #define _IN6A_LLX_FROM_EUI64(s, eui64, as) do { \ | |
| s->s6_addr32[0] = htonl(as); \ | |
| eui64_copy(eui64, s->s6_addr32[2]); \ | |
| } while (0) | |
| #define IN6_LLADDR_FROM_EUI64(l, s, eui64) \ | |
| _IN6_LLX_FROM_EUI64(l, s, eui64, 0xfe800000) | |
| #define IN6_LLTOKEN_FROM_EUI64(l, s, eui64) \ | |
| _IN6_LLX_FROM_EUI64(l, s, eui64, 0) | |
| #define IN6A_LLADDR_FROM_EUI64(s, eui64) \ | |
| _IN6A_LLX_FROM_EUI64(s, eui64, 0xfe800000) | |
| #endif /* defined(INET6) && defined(SOL2) */ | |
| #if !defined(INET6) || !defined(SOL2) | |
| #define MAXIFS 256 /* Max # of interfaces */ | |
| #endif /* defined(INET6) && defined(SOL2) */ | |
| static int restore_term; | |
| static struct termios inittermios; | |
| #ifndef CRTSCTS | |
| static struct termiox inittermiox; | |
| static int termiox_ok; | |
| #endif | |
| static struct winsize wsinfo; /* Initial window size info */ | |
| static pid_t tty_sid; /* original session ID for terminal */ | |
| extern u_char inpacket_buf[]; /* borrowed from main.c */ | |
| #define MAX_POLLFDS 32 | |
| static struct pollfd pollfds[MAX_POLLFDS]; | |
| static int n_pollfds; | |
| static int link_mtu, link_mru; | |
| #define NMODULES 32 | |
| static int tty_nmodules; | |
| static char tty_modules[NMODULES][FMNAMESZ+1]; | |
| static int tty_npushed; | |
| static int if_is_up; /* Interface has been marked up */ | |
| static u_int32_t remote_addr; /* IP address of peer */ | |
| static u_int32_t default_route_gateway; /* Gateway for default route added */ | |
| static eui64_t default_route_gateway6; /* Gateway for default IPv6 route added */ | |
| static u_int32_t proxy_arp_addr; /* Addr for proxy arp entry added */ | |
| /* Prototypes for procedures local to this file. */ | |
| static int translate_speed(int); | |
| static int baud_rate_of(int); | |
| static int get_ether_addr(u_int32_t, struct sockaddr *); | |
| static int get_hw_addr(char *, u_int32_t, struct sockaddr *); | |
| static int get_hw_addr_dlpi(char *, struct sockaddr *); | |
| static int dlpi_attach(int, int); | |
| static int dlpi_info_req(int); | |
| static int dlpi_get_reply(int, union DL_primitives *, int, size_t); | |
| static int strioctl(int, int, void *, int, int); | |
| #ifdef SOL2 | |
| /* | |
| * sifppa - Sets interface ppa | |
| * | |
| * without setting the ppa, ip module will return EINVAL upon setting the | |
| * interface UP (SIOCSxIFFLAGS). This is because ip module in 2.8 expects | |
| * two DLPI_INFO_REQ to be sent down to the driver (below ip) before | |
| * IFF_UP can be set. Plumbing the device causes one DLPI_INFO_REQ to | |
| * be sent down, and the second DLPI_INFO_REQ is sent upon receiving | |
| * IF_UNITSEL (old) or SIOCSLIFNAME (new) ioctls. Such setting of the ppa | |
| * is required because the ppp DLPI provider advertises itself as | |
| * a DLPI style 2 type, which requires a point of attachment to be | |
| * specified. The only way the user can specify a point of attachment | |
| * is via SIOCSLIFNAME or IF_UNITSEL. | |
| * | |
| * Such changes in the behavior of ip module was made to meet new or | |
| * evolving standards requirements. | |
| * | |
| */ | |
| static int | |
| sifppa(fd, ppa) | |
| int fd; | |
| int ppa; | |
| { | |
| return (int)ioctl(fd, IF_UNITSEL, (char *)&ppa); | |
| } | |
| #endif /* SOL2 */ | |
| #if defined(SOL2) && defined(INET6) | |
| /* | |
| * get_first_ether_hwaddr - get the hardware address for the first | |
| * ethernet-style interface on this system. | |
| * | |
| * NOTE: This is the lifreq version (Solaris 8 and above) | |
| */ | |
| int | |
| get_first_ether_hwaddr(u_char *addr) | |
| { | |
| struct lifnum lifn; | |
| struct lifconf lifc; | |
| struct lifreq *plifreq; | |
| struct lifreq lifr; | |
| int fd, num_ifs, i, found; | |
| uint_t fl, req_size; | |
| char *req; | |
| fd = socket(AF_INET, SOCK_DGRAM, 0); | |
| if (fd < 0) { | |
| return -1; | |
| } | |
| /* | |
| * Find out how many interfaces are running | |
| */ | |
| lifn.lifn_family = AF_UNSPEC; | |
| lifn.lifn_flags = LIFC_NOXMIT; | |
| if (ioctl(fd, SIOCGLIFNUM, &lifn) < 0) { | |
| close(fd); | |
| error("could not determine number of interfaces: %m"); | |
| return -1; | |
| } | |
| num_ifs = lifn.lifn_count; | |
| req_size = num_ifs * sizeof(struct lifreq); | |
| req = malloc(req_size); | |
| if (req == NULL) { | |
| close(fd); | |
| error("out of memory"); | |
| return -1; | |
| } | |
| /* | |
| * Get interface configuration info for all interfaces | |
| */ | |
| lifc.lifc_family = AF_UNSPEC; | |
| lifc.lifc_flags = LIFC_NOXMIT; | |
| lifc.lifc_len = req_size; | |
| lifc.lifc_buf = req; | |
| if (ioctl(fd, SIOCGLIFCONF, &lifc) < 0) { | |
| close(fd); | |
| free(req); | |
| error("SIOCGLIFCONF: %m"); | |
| return -1; | |
| } | |
| /* | |
| * And traverse each interface to look specifically for the first | |
| * occurence of an Ethernet interface which has been marked up | |
| */ | |
| plifreq = lifc.lifc_req; | |
| found = 0; | |
| for (i = lifc.lifc_len / sizeof(struct lifreq); i > 0; i--, plifreq++) { | |
| if (strchr(plifreq->lifr_name, ':') != NULL) | |
| continue; | |
| memset(&lifr, 0, sizeof(lifr)); | |
| strncpy(lifr.lifr_name, plifreq->lifr_name, sizeof(lifr.lifr_name)); | |
| if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) { | |
| error("SIOCGLIFFLAGS: %m"); | |
| break; | |
| } | |
| fl = lifr.lifr_flags; | |
| if ((fl & (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP)) | |
| != (IFF_UP | IFF_BROADCAST)) | |
| continue; | |
| if (get_if_hwaddr(addr, lifr.lifr_name) < 0) | |
| continue; | |
| found = 1; | |
| break; | |
| } | |
| free(req); | |
| close(fd); | |
| if (found) | |
| return 0; | |
| else | |
| return -1; | |
| } | |
| #else | |
| /* | |
| * get_first_ether_hwaddr - get the hardware address for the first | |
| * ethernet-style interface on this system. | |
| * | |
| * NOTE: This is the ifreq version (before Solaris 8). | |
| */ | |
| int | |
| get_first_ether_hwaddr(u_char *addr) | |
| { | |
| struct ifconf ifc; | |
| struct ifreq *pifreq; | |
| struct ifreq ifr; | |
| int fd, num_ifs, i, found; | |
| uint_t fl, req_size; | |
| char *req; | |
| fd = socket(AF_INET, SOCK_DGRAM, 0); | |
| if (fd < 0) { | |
| return -1; | |
| } | |
| /* | |
| * Find out how many interfaces are running | |
| */ | |
| if (ioctl(fd, SIOCGIFNUM, (char *)&num_ifs) < 0) { | |
| num_ifs = MAXIFS; | |
| } | |
| req_size = num_ifs * sizeof(struct ifreq); | |
| req = malloc(req_size); | |
| if (req == NULL) { | |
| close(fd); | |
| error("out of memory"); | |
| return -1; | |
| } | |
| /* | |
| * Get interface configuration info for all interfaces | |
| */ | |
| ifc.ifc_len = req_size; | |
| ifc.ifc_buf = req; | |
| if (ioctl(fd, SIOCGIFCONF, &ifc) < 0) { | |
| close(fd); | |
| free(req); | |
| error("SIOCGIFCONF: %m"); | |
| return -1; | |
| } | |
| /* | |
| * And traverse each interface to look specifically for the first | |
| * occurence of an Ethernet interface which has been marked up | |
| */ | |
| pifreq = ifc.ifc_req; | |
| found = 0; | |
| for (i = ifc.ifc_len / sizeof(struct ifreq); i > 0; i--, pifreq++) { | |
| if (strchr(pifreq->ifr_name, ':') != NULL) | |
| continue; | |
| memset(&ifr, 0, sizeof(ifr)); | |
| strncpy(ifr.ifr_name, pifreq->ifr_name, sizeof(ifr.ifr_name)); | |
| if (ioctl(fd, SIOCGIFFLAGS, &ifr) < 0) { | |
| error("SIOCGIFFLAGS: %m"); | |
| break; | |
| } | |
| fl = ifr.ifr_flags; | |
| if ((fl & (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP)) | |
| != (IFF_UP | IFF_BROADCAST)) | |
| continue; | |
| if (get_if_hwaddr(addr, ifr.ifr_name) < 0) | |
| continue; | |
| found = 1; | |
| break; | |
| } | |
| free(req); | |
| close(fd); | |
| if (found) | |
| return 0; | |
| else | |
| return -1; | |
| } | |
| #endif /* defined(SOL2) && defined(INET6) */ | |
| #if defined(SOL2) | |
| /* | |
| * get_if_hwaddr - get the hardware address for the specified | |
| * network interface device. | |
| */ | |
| int | |
| get_if_hwaddr(u_char *addr, char *if_name) | |
| { | |
| struct sockaddr s_eth_addr; | |
| struct ether_addr *eth_addr = (struct ether_addr *)&s_eth_addr.sa_data; | |
| if (if_name == NULL) | |
| return -1; | |
| /* | |
| * Send DL_INFO_REQ to the driver to solicit its MAC address | |
| */ | |
| if (!get_hw_addr_dlpi(if_name, &s_eth_addr)) { | |
| error("could not obtain hardware address for %s", if_name); | |
| return -1; | |
| } | |
| memcpy(addr, eth_addr->ether_addr_octet, 6); | |
| return 1; | |
| } | |
| #endif /* SOL2 */ | |
| #if defined(SOL2) && defined(INET6) | |
| /* | |
| * slifname - Sets interface ppa and flags | |
| * | |
| * in addition to the comments stated in sifppa(), IFF_IPV6 bit must | |
| * be set in order to declare this as an IPv6 interface | |
| */ | |
| static int | |
| slifname(int fd, int ppa) | |
| { | |
| struct lifreq lifr; | |
| int ret; | |
| memset(&lifr, 0, sizeof(lifr)); | |
| ret = ioctl(fd, SIOCGLIFFLAGS, &lifr); | |
| if (ret < 0) | |
| goto slifname_done; | |
| lifr.lifr_flags |= IFF_IPV6; | |
| lifr.lifr_flags &= ~(IFF_BROADCAST | IFF_IPV4); | |
| lifr.lifr_ppa = ppa; | |
| strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name)); | |
| ret = ioctl(fd, SIOCSLIFNAME, &lifr); | |
| slifname_done: | |
| return ret; | |
| } | |
| #endif /* defined(SOL2) && defined(INET6) */ | |
| /* | |
| * sys_init - System-dependent initialization. | |
| */ | |
| void | |
| sys_init(void) | |
| { | |
| int ifd, x; | |
| struct ifreq ifr; | |
| #if defined(INET6) && defined(SOL2) | |
| int i6fd; | |
| struct lifreq lifr; | |
| #endif /* defined(INET6) && defined(SOL2) */ | |
| #if !defined(SOL2) | |
| struct { | |
| union DL_primitives prim; | |
| char space[64]; | |
| } reply; | |
| #endif /* !defined(SOL2) */ | |
| ipfd = open(mux_dev_name, O_RDWR, 0); | |
| if (ipfd < 0) | |
| fatal("Couldn't open IP device: %m"); | |
| #if defined(INET6) && defined(SOL2) | |
| ip6fd = open(UDP6_DEV_NAME, O_RDWR, 0); | |
| if (ip6fd < 0) | |
| fatal("Couldn't open IP device (2): %m"); | |
| #endif /* defined(INET6) && defined(SOL2) */ | |
| if (default_device && !notty) | |
| tty_sid = getsid((pid_t)0); | |
| pppfd = open(PPP_DEV_NAME, O_RDWR | O_NONBLOCK, 0); | |
| if (pppfd < 0) | |
| fatal("Can't open %s: %m", PPP_DEV_NAME); | |
| if (kdebugflag & 1) { | |
| x = PPPDBG_LOG + PPPDBG_DRIVER; | |
| strioctl(pppfd, PPPIO_DEBUG, &x, sizeof(int), 0); | |
| } | |
| /* Assign a new PPA and get its unit number. */ | |
| if (strioctl(pppfd, PPPIO_NEWPPA, &ifunit, 0, sizeof(int)) < 0) | |
| fatal("Can't create new PPP interface: %m"); | |
| #if defined(SOL2) | |
| /* | |
| * Since sys_init() is called prior to ifname being set in main(), | |
| * we need to get the ifname now, otherwise slifname(), and others, | |
| * will fail, or maybe, I should move them to a later point ? | |
| * <adi.masputra@sun.com> | |
| */ | |
| sprintf(ifname, PPP_DRV_NAME "%d", ifunit); | |
| #endif /* defined(SOL2) */ | |
| /* | |
| * Open the ppp device again and link it under the ip multiplexor. | |
| * IP will assign a unit number which hopefully is the same as ifunit. | |
| * I don't know any way to be certain they will be the same. :-( | |
| */ | |
| ifd = open(PPP_DEV_NAME, O_RDWR, 0); | |
| if (ifd < 0) | |
| fatal("Can't open %s (2): %m", PPP_DEV_NAME); | |
| if (kdebugflag & 1) { | |
| x = PPPDBG_LOG + PPPDBG_DRIVER; | |
| strioctl(ifd, PPPIO_DEBUG, &x, sizeof(int), 0); | |
| } | |
| #if defined(INET6) && defined(SOL2) | |
| i6fd = open(PPP_DEV_NAME, O_RDWR, 0); | |
| if (i6fd < 0) { | |
| close(ifd); | |
| fatal("Can't open %s (3): %m", PPP_DEV_NAME); | |
| } | |
| if (kdebugflag & 1) { | |
| x = PPPDBG_LOG + PPPDBG_DRIVER; | |
| strioctl(i6fd, PPPIO_DEBUG, &x, sizeof(int), 0); | |
| } | |
| #endif /* defined(INET6) && defined(SOL2) */ | |
| #if defined(SOL2) | |
| if (ioctl(ifd, I_PUSH, IP_MOD_NAME) < 0) { | |
| close(ifd); | |
| #if defined(INET6) | |
| close(i6fd); | |
| #endif /* defined(INET6) */ | |
| fatal("Can't push IP module: %m"); | |
| } | |
| /* | |
| * Assign ppa according to the unit number returned by ppp device | |
| * after plumbing is completed above. | |
| */ | |
| if (sifppa(ifd, ifunit) < 0) { | |
| close (ifd); | |
| #if defined(INET6) | |
| close(i6fd); | |
| #endif /* defined(INET6) */ | |
| fatal("Can't set ppa for unit %d: %m", ifunit); | |
| } | |
| #if defined(INET6) | |
| /* | |
| * An IPv6 interface is created anyway, even when the user does not | |
| * explicitly enable it. Note that the interface will be marked | |
| * IPv6 during slifname(). | |
| */ | |
| if (ioctl(i6fd, I_PUSH, IP_MOD_NAME) < 0) { | |
| close(ifd); | |
| close(i6fd); | |
| fatal("Can't push IP module (2): %m"); | |
| } | |
| /* | |
| * Assign ppa according to the unit number returned by ppp device | |
| * after plumbing is completed above. In addition, mark the interface | |
| * as an IPv6 interface. | |
| */ | |
| if (slifname(i6fd, ifunit) < 0) { | |
| close(ifd); | |
| close(i6fd); | |
| fatal("Can't set ifname for unit %d: %m", ifunit); | |
| } | |
| #endif /* defined(INET6) */ | |
| ipmuxid = ioctl(ipfd, I_PLINK, ifd); | |
| close(ifd); | |
| if (ipmuxid < 0) { | |
| #if defined(INET6) | |
| close(i6fd); | |
| #endif /* defined(INET6) */ | |
| fatal("Can't I_PLINK PPP device to IP: %m"); | |
| } | |
| memset(&ifr, 0, sizeof(ifr)); | |
| sprintf(ifr.ifr_name, "%s", ifname); | |
| ifr.ifr_ip_muxid = ipmuxid; | |
| /* | |
| * In Sol 8 and later, STREAMS dynamic module plumbing feature exists. | |
| * This is so that an arbitrary module can be inserted, or deleted, | |
| * between ip module and the device driver without tearing down the | |
| * existing stream. Such feature requires the mux ids, which is set | |
| * by SIOCSIFMUXID (or SIOCLSIFMUXID). | |
| */ | |
| if (ioctl(ipfd, SIOCSIFMUXID, &ifr) < 0) { | |
| ioctl(ipfd, I_PUNLINK, ipmuxid); | |
| #if defined(INET6) | |
| close(i6fd); | |
| #endif /* defined(INET6) */ | |
| fatal("SIOCSIFMUXID: %m"); | |
| } | |
| #else /* else if !defined(SOL2) */ | |
| if (dlpi_attach(ifd, ifunit) < 0 || | |
| dlpi_get_reply(ifd, &reply.prim, DL_OK_ACK, sizeof(reply)) < 0) { | |
| close(ifd); | |
| fatal("Can't attach to ppp%d: %m", ifunit); | |
| } | |
| ipmuxid = ioctl(ipfd, I_LINK, ifd); | |
| close(ifd); | |
| if (ipmuxid < 0) | |
| fatal("Can't link PPP device to IP: %m"); | |
| #endif /* defined(SOL2) */ | |
| #if defined(INET6) && defined(SOL2) | |
| ip6muxid = ioctl(ip6fd, I_PLINK, i6fd); | |
| close(i6fd); | |
| if (ip6muxid < 0) { | |
| ioctl(ipfd, I_PUNLINK, ipmuxid); | |
| fatal("Can't I_PLINK PPP device to IP (2): %m"); | |
| } | |
| memset(&lifr, 0, sizeof(lifr)); | |
| sprintf(lifr.lifr_name, "%s", ifname); | |
| lifr.lifr_ip_muxid = ip6muxid; | |
| /* | |
| * Let IP know of the mux id [see comment for SIOCSIFMUXID above] | |
| */ | |
| if (ioctl(ip6fd, SIOCSLIFMUXID, &lifr) < 0) { | |
| ioctl(ipfd, I_PUNLINK, ipmuxid); | |
| ioctl(ip6fd, I_PUNLINK, ip6muxid); | |
| fatal("Can't link PPP device to IP (2): %m"); | |
| } | |
| #endif /* defined(INET6) && defined(SOL2) */ | |
| #if !defined(SOL2) | |
| /* Set the interface name for the link. */ | |
| slprintf(ifr.ifr_name, sizeof(ifr.ifr_name), PPP_DRV_NAME "%d", ifunit); | |
| ifr.ifr_metric = ipmuxid; | |
| if (strioctl(ipfd, SIOCSIFNAME, (char *)&ifr, sizeof ifr, 0) < 0) | |
| fatal("Can't set interface name %s: %m", ifr.ifr_name); | |
| #endif /* !defined(SOL2) */ | |
| n_pollfds = 0; | |
| } | |
| /* | |
| * sys_cleanup - restore any system state we modified before exiting: | |
| * mark the interface down, delete default route and/or proxy arp entry. | |
| * This should call die() because it's called from die(). | |
| */ | |
| void | |
| sys_cleanup(void) | |
| { | |
| #if defined(SOL2) | |
| struct ifreq ifr; | |
| #if defined(INET6) | |
| struct lifreq lifr; | |
| #endif /* defined(INET6) */ | |
| #endif /* defined(SOL2) */ | |
| #if defined(SOL2) && defined(INET6) | |
| if (if6_is_up) | |
| sif6down(0); | |
| #endif /* defined(SOL2) && defined(INET6) */ | |
| if (if_is_up) | |
| sifdown(0); | |
| if (default_route_gateway) | |
| cifdefaultroute(0, default_route_gateway, default_route_gateway); | |
| if (default_route_gateway6.e32[0] != 0 || default_route_gateway6.e32[1] != 0) | |
| cif6defaultroute(0, default_route_gateway6, default_route_gateway6); | |
| if (proxy_arp_addr) | |
| cifproxyarp(0, proxy_arp_addr); | |
| #if defined(SOL2) | |
| /* | |
| * Make sure we ask ip what the muxid, because 'ifconfig modlist' will | |
| * unlink and re-link the modules, causing the muxid to change. | |
| */ | |
| memset(&ifr, 0, sizeof(ifr)); | |
| sprintf(ifr.ifr_name, "%s", ifname); | |
| if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) { | |
| error("SIOCGIFFLAGS: %m"); | |
| return; | |
| } | |
| if (ioctl(ipfd, SIOCGIFMUXID, &ifr) < 0) { | |
| error("SIOCGIFMUXID: %m"); | |
| return; | |
| } | |
| ipmuxid = ifr.ifr_ip_muxid; | |
| if (ioctl(ipfd, I_PUNLINK, ipmuxid) < 0) { | |
| error("Can't I_PUNLINK PPP from IP: %m"); | |
| return; | |
| } | |
| #if defined(INET6) | |
| /* | |
| * Make sure we ask ip what the muxid, because 'ifconfig modlist' will | |
| * unlink and re-link the modules, causing the muxid to change. | |
| */ | |
| memset(&lifr, 0, sizeof(lifr)); | |
| sprintf(lifr.lifr_name, "%s", ifname); | |
| if (ioctl(ip6fd, SIOCGLIFFLAGS, &lifr) < 0) { | |
| error("SIOCGLIFFLAGS: %m"); | |
| return; | |
| } | |
| if (ioctl(ip6fd, SIOCGLIFMUXID, &lifr) < 0) { | |
| error("SIOCGLIFMUXID: %m"); | |
| return; | |
| } | |
| ip6muxid = lifr.lifr_ip_muxid; | |
| if (ioctl(ip6fd, I_PUNLINK, ip6muxid) < 0) { | |
| error("Can't I_PUNLINK PPP from IP (2): %m"); | |
| } | |
| #endif /* defined(INET6) */ | |
| #endif /* defined(SOL2) */ | |
| } | |
| /* | |
| * sys_close - Clean up in a child process before execing. | |
| */ | |
| void | |
| sys_close(void) | |
| { | |
| close(ipfd); | |
| #if defined(INET6) && defined(SOL2) | |
| close(ip6fd); | |
| #endif /* defined(INET6) && defined(SOL2) */ | |
| if (pppfd >= 0) | |
| close(pppfd); | |
| } | |
| /* | |
| * sys_check_options - check the options that the user specified | |
| */ | |
| int | |
| sys_check_options(void) | |
| { | |
| return 1; | |
| } | |
| #if 0 | |
| /* | |
| * daemon - Detach us from controlling terminal session. | |
| */ | |
| int | |
| daemon(int nochdir, int noclose) | |
| { | |
| int pid; | |
| if ((pid = fork()) < 0) | |
| return -1; | |
| if (pid != 0) | |
| exit(0); /* parent dies */ | |
| setsid(); | |
| if (!nochdir) | |
| chdir("/"); | |
| if (!noclose) { | |
| fclose(stdin); /* don't need stdin, stdout, stderr */ | |
| fclose(stdout); | |
| fclose(stderr); | |
| } | |
| return 0; | |
| } | |
| #endif | |
| /* | |
| * ppp_available - check whether the system has any ppp interfaces | |
| */ | |
| int | |
| ppp_available(void) | |
| { | |
| struct stat buf; | |
| return stat(PPP_DEV_NAME, &buf) >= 0; | |
| } | |
| /* | |
| * any_compressions - see if compression is enabled or not | |
| * | |
| * In the STREAMS implementation of kernel-portion pppd, | |
| * the comp STREAMS module performs the ACFC, PFC, as well | |
| * CCP and VJ compressions. However, if the user has explicitly | |
| * declare to not enable them from the command line, there is | |
| * no point of having the comp module be pushed on the stream. | |
| */ | |
| static int | |
| any_compressions(void) | |
| { | |
| if ((!lcp_wantoptions[0].neg_accompression) && | |
| (!lcp_wantoptions[0].neg_pcompression) && | |
| (!ccp_protent.enabled_flag) && | |
| (!ipcp_wantoptions[0].neg_vj)) { | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| /* | |
| * tty_establish_ppp - Turn the serial port into a ppp interface. | |
| */ | |
| int | |
| tty_establish_ppp(int fd) | |
| { | |
| int i; | |
| /* Pop any existing modules off the tty stream. */ | |
| for (i = 0;; ++i) | |
| if (ioctl(fd, I_LOOK, tty_modules[i]) < 0 | |
| || strcmp(tty_modules[i], "ptem") == 0 | |
| || ioctl(fd, I_POP, 0) < 0) | |
| break; | |
| tty_nmodules = i; | |
| /* Push the async hdlc module and the compressor module. */ | |
| tty_npushed = 0; | |
| if(!sync_serial) { | |
| if (ioctl(fd, I_PUSH, AHDLC_MOD_NAME) < 0) { | |
| error("Couldn't push PPP Async HDLC module: %m"); | |
| return -1; | |
| } | |
| ++tty_npushed; | |
| } | |
| if (kdebugflag & 4) { | |
| i = PPPDBG_LOG + PPPDBG_AHDLC; | |
| strioctl(pppfd, PPPIO_DEBUG, &i, sizeof(int), 0); | |
| } | |
| /* | |
| * There's no need to push comp module if we don't intend | |
| * to compress anything | |
| */ | |
| if (any_compressions()) { | |
| if (ioctl(fd, I_PUSH, COMP_MOD_NAME) < 0) | |
| error("Couldn't push PPP compression module: %m"); | |
| else | |
| ++tty_npushed; | |
| } | |
| if (kdebugflag & 2) { | |
| i = PPPDBG_LOG; | |
| if (any_compressions()) | |
| i += PPPDBG_COMP; | |
| strioctl(pppfd, PPPIO_DEBUG, &i, sizeof(int), 0); | |
| } | |
| /* Link the serial port under the PPP multiplexor. */ | |
| if ((fdmuxid = ioctl(pppfd, I_LINK, fd)) < 0) { | |
| error("Can't link tty to PPP mux: %m"); | |
| return -1; | |
| } | |
| return pppfd; | |
| } | |
| /* | |
| * tty_disestablish_ppp - Restore the serial port to normal operation. | |
| * It attempts to reconstruct the stream with the previously popped | |
| * modules. This shouldn't call die() because it's called from die(). | |
| */ | |
| void | |
| tty_disestablish_ppp(int fd) | |
| { | |
| int i; | |
| if (fdmuxid >= 0) { | |
| if (ioctl(pppfd, I_UNLINK, fdmuxid) < 0) { | |
| if (!hungup) | |
| error("Can't unlink tty from PPP mux: %m"); | |
| } | |
| fdmuxid = -1; | |
| if (!hungup) { | |
| while (tty_npushed > 0 && ioctl(fd, I_POP, 0) >= 0) | |
| --tty_npushed; | |
| for (i = tty_nmodules - 1; i >= 0; --i) | |
| if (ioctl(fd, I_PUSH, tty_modules[i]) < 0) | |
| error("Couldn't restore tty module %s: %m", | |
| tty_modules[i]); | |
| } | |
| if (hungup && default_device && tty_sid > 0) { | |
| /* | |
| * If we have received a hangup, we need to send a SIGHUP | |
| * to the terminal's controlling process. The reason is | |
| * that the original stream head for the terminal hasn't | |
| * seen the M_HANGUP message (it went up through the ppp | |
| * driver to the stream head for our fd to /dev/ppp). | |
| */ | |
| kill(tty_sid, SIGHUP); | |
| } | |
| } | |
| } | |
| /* | |
| * Check whether the link seems not to be 8-bit clean. | |
| */ | |
| void | |
| clean_check(void) | |
| { | |
| int x; | |
| char *s; | |
| if (strioctl(pppfd, PPPIO_GCLEAN, &x, 0, sizeof(x)) < 0) | |
| return; | |
| s = NULL; | |
| switch (~x) { | |
| case RCV_B7_0: | |
| s = "bit 7 set to 1"; | |
| break; | |
| case RCV_B7_1: | |
| s = "bit 7 set to 0"; | |
| break; | |
| case RCV_EVNP: | |
| s = "odd parity"; | |
| break; | |
| case RCV_ODDP: | |
| s = "even parity"; | |
| break; | |
| } | |
| if (s != NULL) { | |
| warn("Serial link is not 8-bit clean:"); | |
| warn("All received characters had %s", s); | |
| } | |
| } | |
| /* | |
| * List of valid speeds. | |
| */ | |
| struct speed { | |
| int speed_int, speed_val; | |
| } speeds[] = { | |
| #ifdef B50 | |
| { 50, B50 }, | |
| #endif | |
| #ifdef B75 | |
| { 75, B75 }, | |
| #endif | |
| #ifdef B110 | |
| { 110, B110 }, | |
| #endif | |
| #ifdef B134 | |
| { 134, B134 }, | |
| #endif | |
| #ifdef B150 | |
| { 150, B150 }, | |
| #endif | |
| #ifdef B200 | |
| { 200, B200 }, | |
| #endif | |
| #ifdef B300 | |
| { 300, B300 }, | |
| #endif | |
| #ifdef B600 | |
| { 600, B600 }, | |
| #endif | |
| #ifdef B1200 | |
| { 1200, B1200 }, | |
| #endif | |
| #ifdef B1800 | |
| { 1800, B1800 }, | |
| #endif | |
| #ifdef B2000 | |
| { 2000, B2000 }, | |
| #endif | |
| #ifdef B2400 | |
| { 2400, B2400 }, | |
| #endif | |
| #ifdef B3600 | |
| { 3600, B3600 }, | |
| #endif | |
| #ifdef B4800 | |
| { 4800, B4800 }, | |
| #endif | |
| #ifdef B7200 | |
| { 7200, B7200 }, | |
| #endif | |
| #ifdef B9600 | |
| { 9600, B9600 }, | |
| #endif | |
| #ifdef B19200 | |
| { 19200, B19200 }, | |
| #endif | |
| #ifdef B38400 | |
| { 38400, B38400 }, | |
| #endif | |
| #ifdef EXTA | |
| { 19200, EXTA }, | |
| #endif | |
| #ifdef EXTB | |
| { 38400, EXTB }, | |
| #endif | |
| #ifdef B57600 | |
| { 57600, B57600 }, | |
| #endif | |
| #ifdef B76800 | |
| { 76800, B76800 }, | |
| #endif | |
| #ifdef B115200 | |
| { 115200, B115200 }, | |
| #endif | |
| #ifdef B153600 | |
| { 153600, B153600 }, | |
| #endif | |
| #ifdef B230400 | |
| { 230400, B230400 }, | |
| #endif | |
| #ifdef B307200 | |
| { 307200, B307200 }, | |
| #endif | |
| #ifdef B460800 | |
| { 460800, B460800 }, | |
| #endif | |
| { 0, 0 } | |
| }; | |
| /* | |
| * Translate from bits/second to a speed_t. | |
| */ | |
| static int | |
| translate_speed(int bps) | |
| { | |
| struct speed *speedp; | |
| if (bps == 0) | |
| return 0; | |
| for (speedp = speeds; speedp->speed_int; speedp++) | |
| if (bps == speedp->speed_int) | |
| return speedp->speed_val; | |
| warn("speed %d not supported", bps); | |
| return 0; | |
| } | |
| /* | |
| * Translate from a speed_t to bits/second. | |
| */ | |
| static int | |
| baud_rate_of(int speed) | |
| { | |
| struct speed *speedp; | |
| if (speed == 0) | |
| return 0; | |
| for (speedp = speeds; speedp->speed_int; speedp++) | |
| if (speed == speedp->speed_val) | |
| return speedp->speed_int; | |
| return 0; | |
| } | |
| /* | |
| * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity, | |
| * at the requested speed, etc. If `local' is true, set CLOCAL | |
| * regardless of whether the modem option was specified. | |
| */ | |
| void | |
| set_up_tty(int fd, int local) | |
| { | |
| int speed; | |
| struct termios tios; | |
| #if !defined (CRTSCTS) | |
| struct termiox tiox; | |
| #endif | |
| if (!sync_serial && tcgetattr(fd, &tios) < 0) | |
| fatal("tcgetattr: %m"); | |
| #ifndef CRTSCTS | |
| termiox_ok = 1; | |
| if (!sync_serial && ioctl (fd, TCGETX, &tiox) < 0) { | |
| termiox_ok = 0; | |
| if (errno != ENOTTY) | |
| error("TCGETX: %m"); | |
| } | |
| #endif | |
| if (!restore_term) { | |
| inittermios = tios; | |
| #ifndef CRTSCTS | |
| inittermiox = tiox; | |
| #endif | |
| if (!sync_serial) | |
| ioctl(fd, TIOCGWINSZ, &wsinfo); | |
| } | |
| tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CLOCAL); | |
| #ifdef CRTSCTS | |
| if (crtscts > 0) | |
| tios.c_cflag |= CRTSCTS; | |
| else if (crtscts < 0) | |
| tios.c_cflag &= ~CRTSCTS; | |
| #else | |
| if (crtscts != 0 && !termiox_ok) { | |
| error("Can't set RTS/CTS flow control"); | |
| } else if (crtscts > 0) { | |
| tiox.x_hflag |= RTSXOFF|CTSXON; | |
| } else if (crtscts < 0) { | |
| tiox.x_hflag &= ~(RTSXOFF|CTSXON); | |
| } | |
| #endif | |
| if (stop_bits >= 2) | |
| tios.c_cflag |= CSTOPB; | |
| tios.c_cflag |= CS8 | CREAD | HUPCL; | |
| if (local || !modem) | |
| tios.c_cflag |= CLOCAL; | |
| tios.c_iflag = IGNBRK | IGNPAR; | |
| tios.c_oflag = 0; | |
| tios.c_lflag = 0; | |
| tios.c_cc[VMIN] = 1; | |
| tios.c_cc[VTIME] = 0; | |
| if (crtscts == -2) { | |
| tios.c_iflag |= IXON | IXOFF; | |
| tios.c_cc[VSTOP] = 0x13; /* DC3 = XOFF = ^S */ | |
| tios.c_cc[VSTART] = 0x11; /* DC1 = XON = ^Q */ | |
| } | |
| speed = translate_speed(inspeed); | |
| if (speed) { | |
| cfsetospeed(&tios, speed); | |
| cfsetispeed(&tios, speed); | |
| } else { | |
| speed = cfgetospeed(&tios); | |
| /* | |
| * We can't proceed if the serial port speed is 0, | |
| * since that implies that the serial port is disabled. | |
| */ | |
| if ((speed == B0) && !sync_serial) | |
| fatal("Baud rate for %s is 0; need explicit baud rate", devnam); | |
| } | |
| if (!sync_serial && tcsetattr(fd, TCSAFLUSH, &tios) < 0) | |
| fatal("tcsetattr: %m"); | |
| #ifndef CRTSCTS | |
| if (!sync_serial && termiox_ok && ioctl (fd, TCSETXF, &tiox) < 0){ | |
| error("TCSETXF: %m"); | |
| } | |
| #endif | |
| baud_rate = inspeed = baud_rate_of(speed); | |
| if (!sync_serial) | |
| restore_term = 1; | |
| } | |
| /* | |
| * restore_tty - restore the terminal to the saved settings. | |
| */ | |
| void | |
| restore_tty(int fd) | |
| { | |
| if (restore_term) { | |
| if (!default_device) { | |
| /* | |
| * Turn off echoing, because otherwise we can get into | |
| * a loop with the tty and the modem echoing to each other. | |
| * We presume we are the sole user of this tty device, so | |
| * when we close it, it will revert to its defaults anyway. | |
| */ | |
| inittermios.c_lflag &= ~(ECHO | ECHONL); | |
| } | |
| if (!sync_serial && tcsetattr(fd, TCSAFLUSH, &inittermios) < 0) | |
| if (!hungup && errno != ENXIO) | |
| warn("tcsetattr: %m"); | |
| #ifndef CRTSCTS | |
| if (!sync_serial && ioctl (fd, TCSETXF, &inittermiox) < 0){ | |
| if (!hungup && errno != ENXIO) | |
| error("TCSETXF: %m"); | |
| } | |
| #endif | |
| if (!sync_serial) | |
| ioctl(fd, TIOCSWINSZ, &wsinfo); | |
| restore_term = 0; | |
| } | |
| } | |
| /* | |
| * setdtr - control the DTR line on the serial port. | |
| * This is called from die(), so it shouldn't call die(). | |
| */ | |
| void | |
| setdtr(int fd, int on) | |
| { | |
| int modembits = TIOCM_DTR; | |
| ioctl(fd, (on? TIOCMBIS: TIOCMBIC), &modembits); | |
| } | |
| /* | |
| * open_loopback - open the device we use for getting packets | |
| * in demand mode. Under Solaris 2, we use our existing fd | |
| * to the ppp driver. | |
| */ | |
| int | |
| open_ppp_loopback(void) | |
| { | |
| return pppfd; | |
| } | |
| /* | |
| * output - Output PPP packet. | |
| */ | |
| void | |
| output(int unit, u_char *p, int len) | |
| { | |
| struct strbuf data; | |
| int retries; | |
| struct pollfd pfd; | |
| dump_packet("sent", p, len); | |
| if (snoop_send_hook) snoop_send_hook(p, len); | |
| data.len = len; | |
| data.buf = (caddr_t) p; | |
| retries = 4; | |
| while (putmsg(pppfd, NULL, &data, 0) < 0) { | |
| if (--retries < 0 || (errno != EWOULDBLOCK && errno != EAGAIN)) { | |
| if (errno != ENXIO) | |
| error("Couldn't send packet: %m"); | |
| break; | |
| } | |
| pfd.fd = pppfd; | |
| pfd.events = POLLOUT; | |
| poll(&pfd, 1, 250); /* wait for up to 0.25 seconds */ | |
| } | |
| } | |
| /* | |
| * wait_input - wait until there is data available, | |
| * for the length of time specified by *timo (indefinite | |
| * if timo is NULL). | |
| */ | |
| void | |
| wait_input(struct timeval *timo) | |
| { | |
| int t; | |
| t = timo == NULL? -1: timo->tv_sec * 1000 + timo->tv_usec / 1000; | |
| if (poll(pollfds, n_pollfds, t) < 0 && errno != EINTR) | |
| fatal("poll: %m"); | |
| } | |
| /* | |
| * add_fd - add an fd to the set that wait_input waits for. | |
| */ | |
| void add_fd(int fd) | |
| { | |
| int n; | |
| for (n = 0; n < n_pollfds; ++n) | |
| if (pollfds[n].fd == fd) | |
| return; | |
| if (n_pollfds < MAX_POLLFDS) { | |
| pollfds[n_pollfds].fd = fd; | |
| pollfds[n_pollfds].events = POLLIN | POLLPRI | POLLHUP; | |
| ++n_pollfds; | |
| } else | |
| error("Too many inputs!"); | |
| } | |
| /* | |
| * remove_fd - remove an fd from the set that wait_input waits for. | |
| */ | |
| void remove_fd(int fd) | |
| { | |
| int n; | |
| for (n = 0; n < n_pollfds; ++n) { | |
| if (pollfds[n].fd == fd) { | |
| while (++n < n_pollfds) | |
| pollfds[n-1] = pollfds[n]; | |
| --n_pollfds; | |
| break; | |
| } | |
| } | |
| } | |
| #if 0 | |
| /* | |
| * wait_loop_output - wait until there is data available on the | |
| * loopback, for the length of time specified by *timo (indefinite | |
| * if timo is NULL). | |
| */ | |
| void | |
| wait_loop_output(struct timeval *timo) | |
| { | |
| wait_input(timo); | |
| } | |
| /* | |
| * wait_time - wait for a given length of time or until a | |
| * signal is received. | |
| */ | |
| void | |
| wait_time(struct timeval *timo) | |
| { | |
| int n; | |
| n = select(0, NULL, NULL, NULL, timo); | |
| if (n < 0 && errno != EINTR) | |
| fatal("select: %m"); | |
| } | |
| #endif | |
| /* | |
| * read_packet - get a PPP packet from the serial device. | |
| */ | |
| int | |
| read_packet(u_char *buf) | |
| { | |
| struct strbuf ctrl, data; | |
| int flags, len; | |
| unsigned char ctrlbuf[sizeof(union DL_primitives) + 64]; | |
| for (;;) { | |
| data.maxlen = PPP_MRU + PPP_HDRLEN; | |
| data.buf = (caddr_t) buf; | |
| ctrl.maxlen = sizeof(ctrlbuf); | |
| ctrl.buf = (caddr_t) ctrlbuf; | |
| flags = 0; | |
| len = getmsg(pppfd, &ctrl, &data, &flags); | |
| if (len < 0) { | |
| if (errno == EAGAIN || errno == EINTR) | |
| return -1; | |
| fatal("Error reading packet: %m"); | |
| } | |
| if (ctrl.len <= 0) | |
| return data.len; | |
| /* | |
| * Got a M_PROTO or M_PCPROTO message. Interpret it | |
| * as a DLPI primitive?? | |
| */ | |
| if (debug) | |
| dbglog("got dlpi prim 0x%x, len=%d", | |
| ((union DL_primitives *)ctrlbuf)->dl_primitive, ctrl.len); | |
| } | |
| } | |
| /* | |
| * get_loop_output - get outgoing packets from the ppp device, | |
| * and detect when we want to bring the real link up. | |
| * Return value is 1 if we need to bring up the link, 0 otherwise. | |
| */ | |
| int | |
| get_loop_output(void) | |
| { | |
| int len; | |
| int rv = 0; | |
| while ((len = read_packet(inpacket_buf)) > 0) { | |
| if (loop_frame(inpacket_buf, len)) | |
| rv = 1; | |
| } | |
| return rv; | |
| } | |
| /* | |
| * netif_set_mtu - set the MTU on the PPP network interface. | |
| */ | |
| void | |
| netif_set_mtu(int unit, int mtu) | |
| { | |
| struct ifreq ifr; | |
| #if defined(INET6) && defined(SOL2) | |
| struct lifreq lifr; | |
| int fd; | |
| #endif /* defined(INET6) && defined(SOL2) */ | |
| memset(&ifr, 0, sizeof(ifr)); | |
| strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name)); | |
| ifr.ifr_metric = mtu; | |
| if (ioctl(ipfd, SIOCSIFMTU, &ifr) < 0) { | |
| error("Couldn't set IP MTU (%s): %m", ifr.ifr_name); | |
| } | |
| #if defined(INET6) && defined(SOL2) | |
| fd = socket(AF_INET6, SOCK_DGRAM, 0); | |
| if (fd < 0) | |
| error("Couldn't open IPv6 socket: %m"); | |
| memset(&lifr, 0, sizeof(lifr)); | |
| strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name)); | |
| lifr.lifr_mtu = mtu; | |
| if (ioctl(fd, SIOCSLIFMTU, &lifr) < 0) { | |
| close(fd); | |
| error("Couldn't set IPv6 MTU (%s): %m", ifr.ifr_name); | |
| } | |
| close(fd); | |
| #endif /* defined(INET6) && defined(SOL2) */ | |
| } | |
| /* | |
| * netif_get_mtu - get the MTU on the PPP network interface. | |
| */ | |
| int | |
| netif_get_mtu(int unit) | |
| { | |
| struct ifreq ifr; | |
| memset (&ifr, '\0', sizeof (ifr)); | |
| strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name)); | |
| if (ioctl(ipfd, SIOCGIFMTU, (caddr_t) &ifr) < 0) { | |
| error("ioctl(SIOCGIFMTU): %m (line %d)", __LINE__); | |
| return 0; | |
| } | |
| return ifr.ifr_metric; | |
| } | |
| /* | |
| * tty_send_config - configure the transmit characteristics of | |
| * the ppp interface. | |
| */ | |
| void | |
| tty_send_config(int mtu, u_int32_t asyncmap, int pcomp, int accomp) | |
| { | |
| int cf[2]; | |
| link_mtu = mtu; | |
| if (strioctl(pppfd, PPPIO_MTU, &mtu, sizeof(mtu), 0) < 0) { | |
| if (hungup && errno == ENXIO) { | |
| ++error_count; | |
| return; | |
| } | |
| error("Couldn't set MTU: %m"); | |
| } | |
| if (fdmuxid >= 0) { | |
| if (!sync_serial) { | |
| if (strioctl(pppfd, PPPIO_XACCM, &asyncmap, sizeof(asyncmap), 0) < 0) | |
| error("Couldn't set transmit ACCM: %m"); | |
| } | |
| cf[0] = (pcomp? COMP_PROT: 0) + (accomp? COMP_AC: 0); | |
| cf[1] = COMP_PROT | COMP_AC; | |
| if (any_compressions() && | |
| strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) | |
| error("Couldn't set prot/AC compression: %m"); | |
| } | |
| } | |
| /* | |
| * tty_set_xaccm - set the extended transmit ACCM for the interface. | |
| */ | |
| void | |
| tty_set_xaccm(ext_accm accm) | |
| { | |
| if (sync_serial) | |
| return; | |
| if (fdmuxid >= 0 | |
| && strioctl(pppfd, PPPIO_XACCM, accm, sizeof(ext_accm), 0) < 0) { | |
| if (!hungup || errno != ENXIO) | |
| warn("Couldn't set extended ACCM: %m"); | |
| } | |
| } | |
| /* | |
| * tty_recv_config - configure the receive-side characteristics of | |
| * the ppp interface. | |
| */ | |
| void | |
| tty_recv_config(int mru, u_int32_t asyncmap, int pcomp, int accomp) | |
| { | |
| int cf[2]; | |
| link_mru = mru; | |
| if (strioctl(pppfd, PPPIO_MRU, &mru, sizeof(mru), 0) < 0) { | |
| if (hungup && errno == ENXIO) { | |
| ++error_count; | |
| return; | |
| } | |
| error("Couldn't set MRU: %m"); | |
| } | |
| if (fdmuxid >= 0) { | |
| if (!sync_serial) { | |
| if (strioctl(pppfd, PPPIO_RACCM, &asyncmap, sizeof(asyncmap), 0) < 0) | |
| error("Couldn't set receive ACCM: %m"); | |
| } | |
| cf[0] = (pcomp? DECOMP_PROT: 0) + (accomp? DECOMP_AC: 0); | |
| cf[1] = DECOMP_PROT | DECOMP_AC; | |
| if (any_compressions() && | |
| strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) | |
| error("Couldn't set prot/AC decompression: %m"); | |
| } | |
| } | |
| /* | |
| * ccp_test - ask kernel whether a given compression method | |
| * is acceptable for use. | |
| */ | |
| int | |
| ccp_test(int unit, u_char *opt_ptr, int opt_len, int for_transmit) | |
| { | |
| if (strioctl(pppfd, (for_transmit? PPPIO_XCOMP: PPPIO_RCOMP), | |
| opt_ptr, opt_len, 0) >= 0) | |
| return 1; | |
| return (errno == ENOSR)? 0: -1; | |
| } | |
| /* | |
| * ccp_flags_set - inform kernel about the current state of CCP. | |
| */ | |
| void | |
| ccp_flags_set(int unit, int isopen, int isup) | |
| { | |
| int cf[2]; | |
| cf[0] = (isopen? CCP_ISOPEN: 0) + (isup? CCP_ISUP: 0); | |
| cf[1] = CCP_ISOPEN | CCP_ISUP | CCP_ERROR | CCP_FATALERROR; | |
| if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) { | |
| if (!hungup || errno != ENXIO) | |
| error("Couldn't set kernel CCP state: %m"); | |
| } | |
| } | |
| /* | |
| * get_idle_time - return how long the link has been idle. | |
| */ | |
| int | |
| get_idle_time(int u, struct ppp_idle *ip) | |
| { | |
| return strioctl(pppfd, PPPIO_GIDLE, ip, 0, sizeof(struct ppp_idle)) >= 0; | |
| } | |
| /* | |
| * get_ppp_stats - return statistics for the link. | |
| */ | |
| int | |
| get_ppp_stats(int u, struct pppd_stats *stats) | |
| { | |
| struct ppp_stats s; | |
| if (!sync_serial && | |
| strioctl(pppfd, PPPIO_GETSTAT, &s, 0, sizeof(s)) < 0) { | |
| error("Couldn't get link statistics: %m"); | |
| return 0; | |
| } | |
| stats->bytes_in = s.p.ppp_ibytes; | |
| stats->bytes_out = s.p.ppp_obytes; | |
| stats->pkts_in = s.p.ppp_ipackets; | |
| stats->pkts_out = s.p.ppp_opackets; | |
| return 1; | |
| } | |
| #if 0 | |
| /* | |
| * set_filters - transfer the pass and active filters to the kernel. | |
| */ | |
| int | |
| set_filters(struct bpf_program *pass, struct bpf_program *active) | |
| { | |
| int ret = 1; | |
| if (pass->bf_len > 0) { | |
| if (strioctl(pppfd, PPPIO_PASSFILT, pass, | |
| sizeof(struct bpf_program), 0) < 0) { | |
| error("Couldn't set pass-filter in kernel: %m"); | |
| ret = 0; | |
| } | |
| } | |
| if (active->bf_len > 0) { | |
| if (strioctl(pppfd, PPPIO_ACTIVEFILT, active, | |
| sizeof(struct bpf_program), 0) < 0) { | |
| error("Couldn't set active-filter in kernel: %m"); | |
| ret = 0; | |
| } | |
| } | |
| return ret; | |
| } | |
| #endif | |
| /* | |
| * ccp_fatal_error - returns 1 if decompression was disabled as a | |
| * result of an error detected after decompression of a packet, | |
| * 0 otherwise. This is necessary because of patent nonsense. | |
| */ | |
| int | |
| ccp_fatal_error(int unit) | |
| { | |
| int cf[2]; | |
| cf[0] = cf[1] = 0; | |
| if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) { | |
| if (errno != ENXIO && errno != EINVAL) | |
| error("Couldn't get compression flags: %m"); | |
| return 0; | |
| } | |
| return cf[0] & CCP_FATALERROR; | |
| } | |
| /* | |
| * sifvjcomp - config tcp header compression | |
| */ | |
| int | |
| sifvjcomp(int u, int vjcomp, int xcidcomp, int xmaxcid) | |
| { | |
| int cf[2]; | |
| char maxcid[2]; | |
| if (vjcomp) { | |
| maxcid[0] = xcidcomp; | |
| maxcid[1] = 15; /* XXX should be rmaxcid */ | |
| if (strioctl(pppfd, PPPIO_VJINIT, maxcid, sizeof(maxcid), 0) < 0) { | |
| error("Couldn't initialize VJ compression: %m"); | |
| } | |
| } | |
| cf[0] = (vjcomp? COMP_VJC + DECOMP_VJC: 0) /* XXX this is wrong */ | |
| + (xcidcomp? COMP_VJCCID + DECOMP_VJCCID: 0); | |
| cf[1] = COMP_VJC + DECOMP_VJC + COMP_VJCCID + DECOMP_VJCCID; | |
| if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) { | |
| if (vjcomp) | |
| error("Couldn't enable VJ compression: %m"); | |
| } | |
| return 1; | |
| } | |
| /* | |
| * sifup - Config the interface up and enable IP packets to pass. | |
| */ | |
| int | |
| sifup(int u) | |
| { | |
| struct ifreq ifr; | |
| strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name)); | |
| if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) { | |
| error("Couldn't mark interface up (get): %m"); | |
| return 0; | |
| } | |
| ifr.ifr_flags |= IFF_UP; | |
| if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) { | |
| error("Couldn't mark interface up (set): %m"); | |
| return 0; | |
| } | |
| if_is_up = 1; | |
| return 1; | |
| } | |
| /* | |
| * sifdown - Config the interface down and disable IP. | |
| */ | |
| int | |
| sifdown(int u) | |
| { | |
| struct ifreq ifr; | |
| if (ipmuxid < 0) | |
| return 1; | |
| strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name)); | |
| if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) { | |
| error("Couldn't mark interface down (get): %m"); | |
| return 0; | |
| } | |
| ifr.ifr_flags &= ~IFF_UP; | |
| if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) { | |
| error("Couldn't mark interface down (set): %m"); | |
| return 0; | |
| } | |
| if_is_up = 0; | |
| return 1; | |
| } | |
| /* | |
| * sifnpmode - Set the mode for handling packets for a given NP. | |
| */ | |
| int | |
| sifnpmode(int u, int proto, enum NPmode mode) | |
| { | |
| int npi[2]; | |
| npi[0] = proto; | |
| npi[1] = (int) mode; | |
| if (strioctl(pppfd, PPPIO_NPMODE, &npi, 2 * sizeof(int), 0) < 0) { | |
| error("ioctl(set NP %d mode to %d): %m", proto, mode); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| #if defined(SOL2) && defined(INET6) | |
| /* | |
| * sif6up - Config the IPv6 interface up and enable IPv6 packets to pass. | |
| */ | |
| int | |
| sif6up(int u) | |
| { | |
| struct lifreq lifr; | |
| int fd; | |
| fd = socket(AF_INET6, SOCK_DGRAM, 0); | |
| if (fd < 0) { | |
| return 0; | |
| } | |
| memset(&lifr, 0, sizeof(lifr)); | |
| strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name)); | |
| if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) { | |
| close(fd); | |
| return 0; | |
| } | |
| lifr.lifr_flags |= IFF_UP; | |
| strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name)); | |
| if (ioctl(fd, SIOCSLIFFLAGS, &lifr) < 0) { | |
| close(fd); | |
| return 0; | |
| } | |
| if6_is_up = 1; | |
| close(fd); | |
| return 1; | |
| } | |
| /* | |
| * sifdown - Config the IPv6 interface down and disable IPv6. | |
| */ | |
| int | |
| sif6down(int u) | |
| { | |
| struct lifreq lifr; | |
| int fd; | |
| fd = socket(AF_INET6, SOCK_DGRAM, 0); | |
| if (fd < 0) | |
| return 0; | |
| memset(&lifr, 0, sizeof(lifr)); | |
| strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name)); | |
| if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) { | |
| close(fd); | |
| return 0; | |
| } | |
| lifr.lifr_flags &= ~IFF_UP; | |
| strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name)); | |
| if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) { | |
| close(fd); | |
| return 0; | |
| } | |
| if6_is_up = 0; | |
| close(fd); | |
| return 1; | |
| } | |
| /* | |
| * sif6addr - Config the interface with an IPv6 link-local address | |
| */ | |
| int | |
| sif6addr(int u, eui64_t o, eui64_t h) | |
| { | |
| struct lifreq lifr; | |
| struct sockaddr_storage laddr; | |
| struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)&laddr; | |
| int fd; | |
| fd = socket(AF_INET6, SOCK_DGRAM, 0); | |
| if (fd < 0) | |
| return 0; | |
| memset(&lifr, 0, sizeof(lifr)); | |
| strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name)); | |
| /* | |
| * Do this because /dev/ppp responds to DL_PHYS_ADDR_REQ with | |
| * zero values, hence the interface token came to be zero too, | |
| * and without this, in.ndpd will complain | |
| */ | |
| IN6_LLTOKEN_FROM_EUI64(lifr, sin6, o); | |
| if (ioctl(fd, SIOCSLIFTOKEN, &lifr) < 0) { | |
| close(fd); | |
| return 0; | |
| } | |
| /* | |
| * Set the interface address and destination address | |
| */ | |
| IN6_LLADDR_FROM_EUI64(lifr, sin6, o); | |
| if (ioctl(fd, SIOCSLIFADDR, &lifr) < 0) { | |
| close(fd); | |
| return 0; | |
| } | |
| memset(&lifr, 0, sizeof(lifr)); | |
| strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name)); | |
| IN6_LLADDR_FROM_EUI64(lifr, sin6, h); | |
| if (ioctl(fd, SIOCSLIFDSTADDR, &lifr) < 0) { | |
| close(fd); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| /* | |
| * cif6addr - Remove the IPv6 address from interface | |
| */ | |
| int | |
| cif6addr(int u, eui64_t o, eui64_t h) | |
| { | |
| return 1; | |
| } | |
| /* | |
| * sif6defaultroute - assign a default route through the address given. | |
| */ | |
| int | |
| sif6defaultroute(int u, eui64_t l, eui64_t g) | |
| { | |
| struct { | |
| struct rt_msghdr rtm; | |
| struct sockaddr_in6 dst; | |
| struct sockaddr_in6 gw; | |
| } rmsg; | |
| static int seq; | |
| int rtsock; | |
| #if defined(__USLC__) | |
| g = l; /* use the local address as gateway */ | |
| #endif | |
| memset(&rmsg, 0, sizeof(rmsg)); | |
| rmsg.rtm.rtm_msglen = sizeof (rmsg); | |
| rmsg.rtm.rtm_version = RTM_VERSION; | |
| rmsg.rtm.rtm_type = RTM_ADD; | |
| rmsg.rtm.rtm_flags = RTF_GATEWAY; | |
| rmsg.rtm.rtm_addrs = RTA_DST | RTA_GATEWAY; | |
| rmsg.rtm.rtm_pid = getpid(); | |
| rmsg.rtm.rtm_seq = seq++; | |
| rmsg.dst.sin6_family = AF_INET6; | |
| rmsg.gw.sin6_family = AF_INET6; | |
| IN6_SOCKADDR_FROM_EUI64(&rmsg.gw, g); | |
| rtsock = socket(PF_ROUTE, SOCK_RAW, 0); | |
| if (rtsock < 0) { | |
| error("Can't add default route: %m"); | |
| return 0; | |
| } | |
| if (write(rtsock, &rmsg, sizeof(rmsg)) < 0) | |
| error("Can't add default route: %m"); | |
| close(rtsock); | |
| default_route_gateway6 = g; | |
| return 1; | |
| } | |
| /* | |
| * cif6defaultroute - delete a default route through the address given. | |
| */ | |
| int | |
| cif6defaultroute(int u, eui64_t l, eui64_t g) | |
| { | |
| /* No need to do this on Solaris; the kernel deletes the | |
| route when the interface goes down. */ | |
| memset(&default_route_gateway6, 0, sizeof(default_route_gateway6)); | |
| return 1; | |
| } | |
| #endif /* defined(SOL2) && defined(INET6) */ | |
| #define INET_ADDR(x) (((struct sockaddr_in *) &(x))->sin_addr.s_addr) | |
| /* | |
| * sifaddr - Config the interface IP addresses and netmask. | |
| */ | |
| int | |
| sifaddr(int u, u_int32_t o, u_int32_t h, u_int32_t m) | |
| { | |
| struct ifreq ifr; | |
| int ret = 1; | |
| memset(&ifr, 0, sizeof(ifr)); | |
| strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name)); | |
| ifr.ifr_addr.sa_family = AF_INET; | |
| INET_ADDR(ifr.ifr_addr) = m; | |
| if (ioctl(ipfd, SIOCSIFNETMASK, &ifr) < 0) { | |
| error("Couldn't set IP netmask: %m"); | |
| ret = 0; | |
| } | |
| ifr.ifr_addr.sa_family = AF_INET; | |
| INET_ADDR(ifr.ifr_addr) = o; | |
| if (ioctl(ipfd, SIOCSIFADDR, &ifr) < 0) { | |
| error("Couldn't set local IP address: %m"); | |
| ret = 0; | |
| } | |
| /* | |
| * On some systems, we have to explicitly set the point-to-point | |
| * flag bit before we can set a destination address. | |
| */ | |
| if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) >= 0 | |
| && (ifr.ifr_flags & IFF_POINTOPOINT) == 0) { | |
| ifr.ifr_flags |= IFF_POINTOPOINT; | |
| if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) { | |
| error("Couldn't mark interface pt-to-pt: %m"); | |
| ret = 0; | |
| } | |
| } | |
| ifr.ifr_dstaddr.sa_family = AF_INET; | |
| INET_ADDR(ifr.ifr_dstaddr) = h; | |
| if (ioctl(ipfd, SIOCSIFDSTADDR, &ifr) < 0) { | |
| error("Couldn't set remote IP address: %m"); | |
| ret = 0; | |
| } | |
| remote_addr = h; | |
| return ret; | |
| } | |
| /* | |
| * cifaddr - Clear the interface IP addresses, and delete routes | |
| * through the interface if possible. | |
| */ | |
| int | |
| cifaddr(int u, u_int32_t o, u_int32_t h) | |
| { | |
| #if defined(__USLC__) /* was: #if 0 */ | |
| cifroute(unit, ouraddr, hisaddr); | |
| if (ipmuxid >= 0) { | |
| notice("Removing ppp interface unit"); | |
| if (ioctl(ipfd, I_UNLINK, ipmuxid) < 0) { | |
| error("Can't remove ppp interface unit: %m"); | |
| return 0; | |
| } | |
| ipmuxid = -1; | |
| } | |
| #endif | |
| remote_addr = 0; | |
| return 1; | |
| } | |
| /* | |
| * sifdefaultroute - assign a default route through the address given. | |
| */ | |
| int | |
| sifdefaultroute(int u, u_int32_t l, u_int32_t g, bool replace) | |
| { | |
| struct rtentry rt; | |
| if (replace) { | |
| error("Replacing the default route is not implemented on Solaris yet"); | |
| return 0; | |
| } | |
| #if defined(__USLC__) | |
| g = l; /* use the local address as gateway */ | |
| #endif | |
| memset(&rt, 0, sizeof(rt)); | |
| rt.rt_dst.sa_family = AF_INET; | |
| INET_ADDR(rt.rt_dst) = 0; | |
| rt.rt_gateway.sa_family = AF_INET; | |
| INET_ADDR(rt.rt_gateway) = g; | |
| rt.rt_flags = RTF_GATEWAY; | |
| if (ioctl(ipfd, SIOCADDRT, &rt) < 0) { | |
| error("Can't add default route: %m"); | |
| return 0; | |
| } | |
| default_route_gateway = g; | |
| return 1; | |
| } | |
| /* | |
| * cifdefaultroute - delete a default route through the address given. | |
| */ | |
| int | |
| cifdefaultroute(int u, u_int32_t l, u_int32_t g) | |
| { | |
| struct rtentry rt; | |
| #if defined(__USLC__) | |
| g = l; /* use the local address as gateway */ | |
| #endif | |
| memset(&rt, 0, sizeof(rt)); | |
| rt.rt_dst.sa_family = AF_INET; | |
| INET_ADDR(rt.rt_dst) = 0; | |
| rt.rt_gateway.sa_family = AF_INET; | |
| INET_ADDR(rt.rt_gateway) = g; | |
| rt.rt_flags = RTF_GATEWAY; | |
| if (ioctl(ipfd, SIOCDELRT, &rt) < 0) { | |
| error("Can't delete default route: %m"); | |
| return 0; | |
| } | |
| default_route_gateway = 0; | |
| return 1; | |
| } | |
| /* | |
| * sifproxyarp - Make a proxy ARP entry for the peer. | |
| */ | |
| int | |
| sifproxyarp(int unit, u_int32_t hisaddr) | |
| { | |
| struct arpreq arpreq; | |
| memset(&arpreq, 0, sizeof(arpreq)); | |
| if (!get_ether_addr(hisaddr, &arpreq.arp_ha)) | |
| return 0; | |
| arpreq.arp_pa.sa_family = AF_INET; | |
| INET_ADDR(arpreq.arp_pa) = hisaddr; | |
| arpreq.arp_flags = ATF_PERM | ATF_PUBL; | |
| if (ioctl(ipfd, SIOCSARP, (caddr_t) &arpreq) < 0) { | |
| error("Couldn't set proxy ARP entry: %m"); | |
| return 0; | |
| } | |
| proxy_arp_addr = hisaddr; | |
| return 1; | |
| } | |
| /* | |
| * cifproxyarp - Delete the proxy ARP entry for the peer. | |
| */ | |
| int | |
| cifproxyarp(int unit, u_int32_t hisaddr) | |
| { | |
| struct arpreq arpreq; | |
| memset(&arpreq, 0, sizeof(arpreq)); | |
| arpreq.arp_pa.sa_family = AF_INET; | |
| INET_ADDR(arpreq.arp_pa) = hisaddr; | |
| if (ioctl(ipfd, SIOCDARP, (caddr_t)&arpreq) < 0) { | |
| error("Couldn't delete proxy ARP entry: %m"); | |
| return 0; | |
| } | |
| proxy_arp_addr = 0; | |
| return 1; | |
| } | |
| /* | |
| * get_ether_addr - get the hardware address of an interface on the | |
| * the same subnet as ipaddr. | |
| */ | |
| #define MAX_IFS 32 | |
| static int | |
| get_ether_addr(u_int32_t ipaddr, struct sockaddr *hwaddr) | |
| { | |
| struct ifreq *ifr, *ifend, ifreq; | |
| int nif; | |
| struct ifconf ifc; | |
| u_int32_t ina, mask; | |
| /* | |
| * Scan through the system's network interfaces. | |
| */ | |
| #ifdef SIOCGIFNUM | |
| if (ioctl(ipfd, SIOCGIFNUM, &nif) < 0) | |
| #endif | |
| nif = MAX_IFS; | |
| ifc.ifc_len = nif * sizeof(struct ifreq); | |
| ifc.ifc_buf = (caddr_t) malloc(ifc.ifc_len); | |
| if (ifc.ifc_buf == 0) | |
| return 0; | |
| if (ioctl(ipfd, SIOCGIFCONF, &ifc) < 0) { | |
| warn("Couldn't get system interface list: %m"); | |
| free(ifc.ifc_buf); | |
| return 0; | |
| } | |
| ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len); | |
| for (ifr = ifc.ifc_req; ifr < ifend; ++ifr) { | |
| if (ifr->ifr_addr.sa_family != AF_INET) | |
| continue; | |
| /* | |
| * Check that the interface is up, and not point-to-point or loopback. | |
| */ | |
| strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name)); | |
| if (ioctl(ipfd, SIOCGIFFLAGS, &ifreq) < 0) | |
| continue; | |
| if ((ifreq.ifr_flags & | |
| (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP)) | |
| != (IFF_UP|IFF_BROADCAST)) | |
| continue; | |
| /* | |
| * Get its netmask and check that it's on the right subnet. | |
| */ | |
| if (ioctl(ipfd, SIOCGIFNETMASK, &ifreq) < 0) | |
| continue; | |
| ina = INET_ADDR(ifr->ifr_addr); | |
| mask = INET_ADDR(ifreq.ifr_addr); | |
| if ((ipaddr & mask) == (ina & mask)) | |
| break; | |
| } | |
| if (ifr >= ifend) { | |
| warn("No suitable interface found for proxy ARP"); | |
| free(ifc.ifc_buf); | |
| return 0; | |
| } | |
| info("found interface %s for proxy ARP", ifr->ifr_name); | |
| if (!get_hw_addr(ifr->ifr_name, ina, hwaddr)) { | |
| error("Couldn't get hardware address for %s", ifr->ifr_name); | |
| free(ifc.ifc_buf); | |
| return 0; | |
| } | |
| free(ifc.ifc_buf); | |
| return 1; | |
| } | |
| /* | |
| * get_hw_addr_dlpi - obtain the hardware address using DLPI | |
| */ | |
| static int | |
| get_hw_addr_dlpi(char *name, struct sockaddr *hwaddr) | |
| { | |
| char *q; | |
| int unit, iffd, adrlen; | |
| unsigned char *adrp; | |
| char ifdev[24]; | |
| struct { | |
| union DL_primitives prim; | |
| char space[64]; | |
| } reply; | |
| /* | |
| * We have to open the device and ask it for its hardware address. | |
| * First split apart the device name and unit. | |
| */ | |
| slprintf(ifdev, sizeof(ifdev), "/dev/%s", name); | |
| for (q = ifdev + strlen(ifdev); --q >= ifdev; ) | |
| if (!isdigit(*q)) | |
| break; | |
| unit = atoi(q+1); | |
| q[1] = 0; | |
| /* | |
| * Open the device and do a DLPI attach and phys_addr_req. | |
| */ | |
| iffd = open(ifdev, O_RDWR); | |
| if (iffd < 0) { | |
| error("Can't open %s: %m", ifdev); | |
| return 0; | |
| } | |
| if (dlpi_attach(iffd, unit) < 0 | |
| || dlpi_get_reply(iffd, &reply.prim, DL_OK_ACK, sizeof(reply)) < 0 | |
| || dlpi_info_req(iffd) < 0 | |
| || dlpi_get_reply(iffd, &reply.prim, DL_INFO_ACK, sizeof(reply)) < 0) { | |
| close(iffd); | |
| return 0; | |
| } | |
| adrlen = reply.prim.info_ack.dl_addr_length; | |
| adrp = (unsigned char *)&reply + reply.prim.info_ack.dl_addr_offset; | |
| #if DL_CURRENT_VERSION >= 2 | |
| if (reply.prim.info_ack.dl_sap_length < 0) | |
| adrlen += reply.prim.info_ack.dl_sap_length; | |
| else | |
| adrp += reply.prim.info_ack.dl_sap_length; | |
| #endif | |
| hwaddr->sa_family = AF_UNSPEC; | |
| memcpy(hwaddr->sa_data, adrp, adrlen); | |
| return 1; | |
| } | |
| /* | |
| * get_hw_addr - obtain the hardware address for a named interface. | |
| */ | |
| static int | |
| get_hw_addr(char *name, u_int32_t ina, struct sockaddr *hwaddr) | |
| { | |
| /* New way - get the address by doing an arp request. */ | |
| int s; | |
| struct arpreq req; | |
| s = socket(AF_INET, SOCK_DGRAM, 0); | |
| if (s < 0) | |
| return 0; | |
| memset(&req, 0, sizeof(req)); | |
| req.arp_pa.sa_family = AF_INET; | |
| INET_ADDR(req.arp_pa) = ina; | |
| if (ioctl(s, SIOCGARP, &req) < 0) { | |
| error("Couldn't get ARP entry for %s: %m", ip_ntoa(ina)); | |
| return 0; | |
| } | |
| *hwaddr = req.arp_ha; | |
| hwaddr->sa_family = AF_UNSPEC; | |
| return 1; | |
| } | |
| static int | |
| dlpi_attach(int fd, int ppa) | |
| { | |
| dl_attach_req_t req; | |
| struct strbuf buf; | |
| req.dl_primitive = DL_ATTACH_REQ; | |
| req.dl_ppa = ppa; | |
| buf.len = sizeof(req); | |
| buf.buf = (void *) &req; | |
| return putmsg(fd, &buf, NULL, RS_HIPRI); | |
| } | |
| static int | |
| dlpi_info_req(int fd) | |
| { | |
| dl_info_req_t req; | |
| struct strbuf buf; | |
| req.dl_primitive = DL_INFO_REQ; | |
| buf.len = sizeof(req); | |
| buf.buf = (void *) &req; | |
| return putmsg(fd, &buf, NULL, RS_HIPRI); | |
| } | |
| static int | |
| dlpi_get_reply(int fd, union DL_primitives *reply, int expected_prim, size_t maxlen) | |
| { | |
| struct strbuf buf; | |
| int flags, n; | |
| struct pollfd pfd; | |
| /* | |
| * Use poll to wait for a message with a timeout. | |
| */ | |
| pfd.fd = fd; | |
| pfd.events = POLLIN | POLLPRI; | |
| do { | |
| n = poll(&pfd, 1, 1000); | |
| } while (n == -1 && errno == EINTR && !got_sigterm); | |
| if (n <= 0) | |
| return -1; | |
| /* | |
| * Get the reply. | |
| */ | |
| buf.maxlen = maxlen; | |
| buf.buf = (void *) reply; | |
| flags = 0; | |
| if (getmsg(fd, &buf, NULL, &flags) < 0) | |
| return -1; | |
| if (buf.len < sizeof(ulong)) { | |
| if (debug) | |
| dbglog("dlpi response short (len=%d)\n", buf.len); | |
| return -1; | |
| } | |
| if (reply->dl_primitive == expected_prim) | |
| return 0; | |
| if (debug) { | |
| if (reply->dl_primitive == DL_ERROR_ACK) { | |
| dbglog("dlpi error %d (unix errno %d) for prim %x\n", | |
| reply->error_ack.dl_errno, reply->error_ack.dl_unix_errno, | |
| reply->error_ack.dl_error_primitive); | |
| } else { | |
| dbglog("dlpi unexpected response prim %x\n", | |
| reply->dl_primitive); | |
| } | |
| } | |
| return -1; | |
| } | |
| /* | |
| * Return user specified netmask, modified by any mask we might determine | |
| * for address `addr' (in network byte order). | |
| * Here we scan through the system's list of interfaces, looking for | |
| * any non-point-to-point interfaces which might appear to be on the same | |
| * network as `addr'. If we find any, we OR in their netmask to the | |
| * user-specified netmask. | |
| */ | |
| u_int32_t | |
| GetMask(u_int32_t addr) | |
| { | |
| u_int32_t mask, nmask, ina; | |
| struct ifreq *ifr, *ifend, ifreq; | |
| int nif; | |
| struct ifconf ifc; | |
| addr = ntohl(addr); | |
| if (IN_CLASSA(addr)) /* determine network mask for address class */ | |
| nmask = IN_CLASSA_NET; | |
| else if (IN_CLASSB(addr)) | |
| nmask = IN_CLASSB_NET; | |
| else | |
| nmask = IN_CLASSC_NET; | |
| /* class D nets are disallowed by bad_ip_adrs */ | |
| mask = netmask | htonl(nmask); | |
| /* | |
| * Scan through the system's network interfaces. | |
| */ | |
| #ifdef SIOCGIFNUM | |
| if (ioctl(ipfd, SIOCGIFNUM, &nif) < 0) | |
| #endif | |
| nif = MAX_IFS; | |
| ifc.ifc_len = nif * sizeof(struct ifreq); | |
| ifc.ifc_buf = (caddr_t) malloc(ifc.ifc_len); | |
| if (ifc.ifc_buf == 0) | |
| return mask; | |
| if (ioctl(ipfd, SIOCGIFCONF, &ifc) < 0) { | |
| warn("Couldn't get system interface list: %m"); | |
| free(ifc.ifc_buf); | |
| return mask; | |
| } | |
| ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len); | |
| for (ifr = ifc.ifc_req; ifr < ifend; ++ifr) { | |
| /* | |
| * Check the interface's internet address. | |
| */ | |
| if (ifr->ifr_addr.sa_family != AF_INET) | |
| continue; | |
| ina = INET_ADDR(ifr->ifr_addr); | |
| if ((ntohl(ina) & nmask) != (addr & nmask)) | |
| continue; | |
| /* | |
| * Check that the interface is up, and not point-to-point or loopback. | |
| */ | |
| strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name)); | |
| if (ioctl(ipfd, SIOCGIFFLAGS, &ifreq) < 0) | |
| continue; | |
| if ((ifreq.ifr_flags & (IFF_UP|IFF_POINTOPOINT|IFF_LOOPBACK)) | |
| != IFF_UP) | |
| continue; | |
| /* | |
| * Get its netmask and OR it into our mask. | |
| */ | |
| if (ioctl(ipfd, SIOCGIFNETMASK, &ifreq) < 0) | |
| continue; | |
| mask |= INET_ADDR(ifreq.ifr_addr); | |
| } | |
| free(ifc.ifc_buf); | |
| return mask; | |
| } | |
| /* | |
| * logwtmp - write an accounting record to the /var/adm/wtmp file. | |
| */ | |
| void | |
| logwtmp(const char *line, const char *name, const char *host) | |
| { | |
| static struct utmpx utmpx; | |
| if (name[0] != 0) { | |
| /* logging in */ | |
| strncpy(utmpx.ut_user, name, sizeof(utmpx.ut_user)); | |
| strncpy(utmpx.ut_line, line, sizeof(utmpx.ut_line)); | |
| strncpy(utmpx.ut_host, host, sizeof(utmpx.ut_host)); | |
| if (*host != '\0') { | |
| utmpx.ut_syslen = strlen(host) + 1; | |
| if (utmpx.ut_syslen > sizeof(utmpx.ut_host)) | |
| utmpx.ut_syslen = sizeof(utmpx.ut_host); | |
| } | |
| utmpx.ut_pid = getpid(); | |
| utmpx.ut_type = USER_PROCESS; | |
| } else { | |
| utmpx.ut_type = DEAD_PROCESS; | |
| } | |
| gettimeofday(&utmpx.ut_tv, NULL); | |
| updwtmpx("/var/adm/wtmpx", &utmpx); | |
| } | |
| /* | |
| * get_host_seed - return the serial number of this machine. | |
| */ | |
| int | |
| get_host_seed(void) | |
| { | |
| char buf[32]; | |
| if (sysinfo(SI_HW_SERIAL, buf, sizeof(buf)) < 0) { | |
| error("sysinfo: %m"); | |
| return 0; | |
| } | |
| return (int) strtoul(buf, NULL, 16); | |
| } | |
| static int | |
| strioctl(int fd, int cmd, void *ptr, int ilen, int olen) | |
| { | |
| struct strioctl str; | |
| str.ic_cmd = cmd; | |
| str.ic_timout = 0; | |
| str.ic_len = ilen; | |
| str.ic_dp = ptr; | |
| if (ioctl(fd, I_STR, &str) == -1) | |
| return -1; | |
| if (str.ic_len != olen) | |
| dbglog("strioctl: expected %d bytes, got %d for cmd %x\n", | |
| olen, str.ic_len, cmd); | |
| return 0; | |
| } | |
| #if 0 | |
| /* | |
| * lock - create a lock file for the named lock device | |
| */ | |
| #define LOCK_PREFIX "/var/spool/locks/LK." | |
| static char lock_file[40]; /* name of lock file created */ | |
| int | |
| lock(char *dev) | |
| { | |
| int n, fd, pid; | |
| struct stat sbuf; | |
| char ascii_pid[12]; | |
| if (stat(dev, &sbuf) < 0) { | |
| error("Can't get device number for %s: %m", dev); | |
| return -1; | |
| } | |
| if ((sbuf.st_mode & S_IFMT) != S_IFCHR) { | |
| error("Can't lock %s: not a character device", dev); | |
| return -1; | |
| } | |
| slprintf(lock_file, sizeof(lock_file), "%s%03d.%03d.%03d", | |
| LOCK_PREFIX, major(sbuf.st_dev), | |
| major(sbuf.st_rdev), minor(sbuf.st_rdev)); | |
| while ((fd = open(lock_file, O_EXCL | O_CREAT | O_RDWR, 0644)) < 0) { | |
| if (errno == EEXIST | |
| && (fd = open(lock_file, O_RDONLY, 0)) >= 0) { | |
| /* Read the lock file to find out who has the device locked */ | |
| n = read(fd, ascii_pid, 11); | |
| if (n <= 0) { | |
| error("Can't read pid from lock file %s", lock_file); | |
| close(fd); | |
| } else { | |
| ascii_pid[n] = 0; | |
| pid = atoi(ascii_pid); | |
| if (pid > 0 && kill(pid, 0) == -1 && errno == ESRCH) { | |
| /* pid no longer exists - remove the lock file */ | |
| if (unlink(lock_file) == 0) { | |
| close(fd); | |
| notice("Removed stale lock on %s (pid %d)", | |
| dev, pid); | |
| continue; | |
| } else | |
| warn("Couldn't remove stale lock on %s", | |
| dev); | |
| } else | |
| notice("Device %s is locked by pid %d", | |
| dev, pid); | |
| } | |
| close(fd); | |
| } else | |
| error("Can't create lock file %s: %m", lock_file); | |
| lock_file[0] = 0; | |
| return -1; | |
| } | |
| slprintf(ascii_pid, sizeof(ascii_pid), "%10d\n", getpid()); | |
| write(fd, ascii_pid, 11); | |
| close(fd); | |
| return 1; | |
| } | |
| /* | |
| * unlock - remove our lockfile | |
| */ | |
| void | |
| unlock(void) | |
| { | |
| if (lock_file[0]) { | |
| unlink(lock_file); | |
| lock_file[0] = 0; | |
| } | |
| } | |
| #endif | |
| /* | |
| * cifroute - delete a route through the addresses given. | |
| */ | |
| int | |
| cifroute(int u, u_int32_t our, u_int32_t his) | |
| { | |
| struct rtentry rt; | |
| memset(&rt, 0, sizeof(rt)); | |
| rt.rt_dst.sa_family = AF_INET; | |
| INET_ADDR(rt.rt_dst) = his; | |
| rt.rt_gateway.sa_family = AF_INET; | |
| INET_ADDR(rt.rt_gateway) = our; | |
| rt.rt_flags = RTF_HOST; | |
| if (ioctl(ipfd, SIOCDELRT, &rt) < 0) { | |
| error("Can't delete route: %m"); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| /* | |
| * have_route_to - determine if the system has a route to the specified | |
| * IP address. Returns 0 if not, 1 if so, -1 if we can't tell. | |
| * `addr' is in network byte order. | |
| * For demand mode to work properly, we have to ignore routes | |
| * through our own interface. | |
| */ | |
| #ifndef T_CURRENT /* needed for Solaris 2.5 */ | |
| #define T_CURRENT MI_T_CURRENT | |
| #endif | |
| int | |
| have_route_to(u_int32_t addr) | |
| { | |
| #ifdef SOL2 | |
| int fd, r, flags, i; | |
| struct { | |
| struct T_optmgmt_req req; | |
| struct opthdr hdr; | |
| } req; | |
| union { | |
| struct T_optmgmt_ack ack; | |
| unsigned char space[64]; | |
| } ack; | |
| struct opthdr *rh; | |
| struct strbuf cbuf, dbuf; | |
| int nroutes; | |
| mib2_ipRouteEntry_t routes[8]; | |
| mib2_ipRouteEntry_t *rp; | |
| fd = open(mux_dev_name, O_RDWR); | |
| if (fd < 0) { | |
| warn("have_route_to: couldn't open %s: %m", mux_dev_name); | |
| return -1; | |
| } | |
| req.req.PRIM_type = T_OPTMGMT_REQ; | |
| req.req.OPT_offset = (char *) &req.hdr - (char *) &req; | |
| req.req.OPT_length = sizeof(req.hdr); | |
| req.req.MGMT_flags = T_CURRENT; | |
| req.hdr.level = MIB2_IP; | |
| req.hdr.name = 0; | |
| req.hdr.len = 0; | |
| cbuf.buf = (char *) &req; | |
| cbuf.len = sizeof(req); | |
| if (putmsg(fd, &cbuf, NULL, 0) == -1) { | |
| warn("have_route_to: putmsg: %m"); | |
| close(fd); | |
| return -1; | |
| } | |
| for (;;) { | |
| cbuf.buf = (char *) &ack; | |
| cbuf.maxlen = sizeof(ack); | |
| dbuf.buf = (char *) routes; | |
| dbuf.maxlen = sizeof(routes); | |
| flags = 0; | |
| r = getmsg(fd, &cbuf, &dbuf, &flags); | |
| if (r == -1) { | |
| warn("have_route_to: getmsg: %m"); | |
| close(fd); | |
| return -1; | |
| } | |
| if (cbuf.len < sizeof(struct T_optmgmt_ack) | |
| || ack.ack.PRIM_type != T_OPTMGMT_ACK | |
| || ack.ack.MGMT_flags != T_SUCCESS | |
| || ack.ack.OPT_length < sizeof(struct opthdr)) { | |
| dbglog("have_route_to: bad message len=%d prim=%d", | |
| cbuf.len, ack.ack.PRIM_type); | |
| close(fd); | |
| return -1; | |
| } | |
| rh = (struct opthdr *) ((char *)&ack + ack.ack.OPT_offset); | |
| if (rh->level == 0 && rh->name == 0) | |
| break; | |
| if (rh->level != MIB2_IP || rh->name != MIB2_IP_21) { | |
| while (r == MOREDATA) | |
| r = getmsg(fd, NULL, &dbuf, &flags); | |
| continue; | |
| } | |
| for (;;) { | |
| nroutes = dbuf.len / sizeof(mib2_ipRouteEntry_t); | |
| for (rp = routes, i = 0; i < nroutes; ++i, ++rp) { | |
| if (rp->ipRouteMask != ~0) { | |
| dbglog("have_route_to: dest=%x gw=%x mask=%x\n", | |
| rp->ipRouteDest, rp->ipRouteNextHop, | |
| rp->ipRouteMask); | |
| if (((addr ^ rp->ipRouteDest) & rp->ipRouteMask) == 0 | |
| && rp->ipRouteNextHop != remote_addr) | |
| return 1; | |
| } | |
| } | |
| if (r == 0) | |
| break; | |
| r = getmsg(fd, NULL, &dbuf, &flags); | |
| } | |
| } | |
| close(fd); | |
| return 0; | |
| #else | |
| return -1; | |
| #endif /* SOL2 */ | |
| } | |
| /* | |
| * get_pty - get a pty master/slave pair and chown the slave side to | |
| * the uid given. Assumes slave_name points to MAXPATHLEN bytes of space. | |
| */ | |
| int | |
| get_pty(int *master_fdp, int *slave_fdp, char *slave_name, int uid) | |
| { | |
| int mfd, sfd; | |
| char *pty_name; | |
| mfd = open("/dev/ptmx", O_RDWR); | |
| if (mfd < 0) { | |
| error("Couldn't open pty master: %m"); | |
| return 0; | |
| } | |
| pty_name = ptsname(mfd); | |
| if (pty_name == NULL) { | |
| error("Couldn't get name of pty slave"); | |
| close(mfd); | |
| return 0; | |
| } | |
| if (chown(pty_name, uid, -1) < 0) | |
| warn("Couldn't change owner of pty slave: %m"); | |
| if (chmod(pty_name, S_IRUSR | S_IWUSR) < 0) | |
| warn("Couldn't change permissions on pty slave: %m"); | |
| if (unlockpt(mfd) < 0) | |
| warn("Couldn't unlock pty slave: %m"); | |
| sfd = open(pty_name, O_RDWR); | |
| if (sfd < 0) { | |
| error("Couldn't open pty slave %s: %m", pty_name); | |
| close(mfd); | |
| return 0; | |
| } | |
| if (ioctl(sfd, I_PUSH, "ptem") < 0) | |
| warn("Couldn't push ptem module on pty slave: %m"); | |
| dbglog("Using %s", pty_name); | |
| strlcpy(slave_name, pty_name, MAXPATHLEN); | |
| *master_fdp = mfd; | |
| *slave_fdp = sfd; | |
| return 1; | |
| } | |
| /******************************************************************** | |
| * | |
| * get_time - Get current time, monotonic if possible. | |
| */ | |
| int | |
| get_time(struct timeval *tv) | |
| { | |
| return gettimeofday(tv, NULL); | |
| } |