| /* $Id: zlib.h,v 1.1 1999/03/23 03:21:58 paulus Exp $ */ | |
| /* | |
| * This file is derived from zlib.h and zconf.h from the zlib-0.95 | |
| * distribution by Jean-loup Gailly and Mark Adler, with some additions | |
| * by Paul Mackerras to aid in implementing Deflate compression and | |
| * decompression for PPP packets. | |
| */ | |
| /* zlib.h -- interface of the 'zlib' general purpose compression library | |
| version 0.95, Aug 16th, 1995. | |
| Copyright (C) 1995 Jean-loup Gailly and Mark Adler | |
| This software is provided 'as-is', without any express or implied | |
| warranty. In no event will the authors be held liable for any damages | |
| arising from the use of this software. | |
| Permission is granted to anyone to use this software for any purpose, | |
| including commercial applications, and to alter it and redistribute it | |
| freely, subject to the following restrictions: | |
| 1. The origin of this software must not be misrepresented; you must not | |
| claim that you wrote the original software. If you use this software | |
| in a product, an acknowledgment in the product documentation would be | |
| appreciated but is not required. | |
| 2. Altered source versions must be plainly marked as such, and must not be | |
| misrepresented as being the original software. | |
| 3. This notice may not be removed or altered from any source distribution. | |
| Jean-loup Gailly Mark Adler | |
| gzip@prep.ai.mit.edu madler@alumni.caltech.edu | |
| */ | |
| #ifndef _ZLIB_H | |
| #define _ZLIB_H | |
| /* #include "zconf.h" */ /* included directly here */ | |
| /* zconf.h -- configuration of the zlib compression library | |
| * Copyright (C) 1995 Jean-loup Gailly. | |
| * For conditions of distribution and use, see copyright notice in zlib.h | |
| */ | |
| /* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */ | |
| /* | |
| The library does not install any signal handler. It is recommended to | |
| add at least a handler for SIGSEGV when decompressing; the library checks | |
| the consistency of the input data whenever possible but may go nuts | |
| for some forms of corrupted input. | |
| */ | |
| /* | |
| * Compile with -DMAXSEG_64K if the alloc function cannot allocate more | |
| * than 64k bytes at a time (needed on systems with 16-bit int). | |
| * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints | |
| * at addresses which are not a multiple of their size. | |
| * Under DOS, -DFAR=far or -DFAR=__far may be needed. | |
| */ | |
| #ifndef STDC | |
| # if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus) | |
| # define STDC | |
| # endif | |
| #endif | |
| #ifdef __MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */ | |
| # include <unix.h> | |
| #endif | |
| /* Maximum value for memLevel in deflateInit2 */ | |
| #ifndef MAX_MEM_LEVEL | |
| # ifdef MAXSEG_64K | |
| # define MAX_MEM_LEVEL 8 | |
| # else | |
| # define MAX_MEM_LEVEL 9 | |
| # endif | |
| #endif | |
| #ifndef FAR | |
| # define FAR | |
| #endif | |
| /* Maximum value for windowBits in deflateInit2 and inflateInit2 */ | |
| #ifndef MAX_WBITS | |
| # define MAX_WBITS 15 /* 32K LZ77 window */ | |
| #endif | |
| /* The memory requirements for deflate are (in bytes): | |
| 1 << (windowBits+2) + 1 << (memLevel+9) | |
| that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) | |
| plus a few kilobytes for small objects. For example, if you want to reduce | |
| the default memory requirements from 256K to 128K, compile with | |
| make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" | |
| Of course this will generally degrade compression (there's no free lunch). | |
| The memory requirements for inflate are (in bytes) 1 << windowBits | |
| that is, 32K for windowBits=15 (default value) plus a few kilobytes | |
| for small objects. | |
| */ | |
| /* Type declarations */ | |
| #ifndef OF /* function prototypes */ | |
| # ifdef STDC | |
| # define OF(args) args | |
| # else | |
| # define OF(args) () | |
| # endif | |
| #endif | |
| typedef unsigned char Byte; /* 8 bits */ | |
| typedef unsigned int uInt; /* 16 bits or more */ | |
| typedef unsigned long uLong; /* 32 bits or more */ | |
| typedef Byte FAR Bytef; | |
| typedef char FAR charf; | |
| typedef int FAR intf; | |
| typedef uInt FAR uIntf; | |
| typedef uLong FAR uLongf; | |
| #ifdef STDC | |
| typedef void FAR *voidpf; | |
| typedef void *voidp; | |
| #else | |
| typedef Byte FAR *voidpf; | |
| typedef Byte *voidp; | |
| #endif | |
| /* end of original zconf.h */ | |
| #define ZLIB_VERSION "0.95P" | |
| /* | |
| The 'zlib' compression library provides in-memory compression and | |
| decompression functions, including integrity checks of the uncompressed | |
| data. This version of the library supports only one compression method | |
| (deflation) but other algorithms may be added later and will have the same | |
| stream interface. | |
| For compression the application must provide the output buffer and | |
| may optionally provide the input buffer for optimization. For decompression, | |
| the application must provide the input buffer and may optionally provide | |
| the output buffer for optimization. | |
| Compression can be done in a single step if the buffers are large | |
| enough (for example if an input file is mmap'ed), or can be done by | |
| repeated calls of the compression function. In the latter case, the | |
| application must provide more input and/or consume the output | |
| (providing more output space) before each call. | |
| */ | |
| typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); | |
| typedef void (*free_func) OF((voidpf opaque, voidpf address, uInt nbytes)); | |
| struct internal_state; | |
| typedef struct z_stream_s { | |
| Bytef *next_in; /* next input byte */ | |
| uInt avail_in; /* number of bytes available at next_in */ | |
| uLong total_in; /* total nb of input bytes read so far */ | |
| Bytef *next_out; /* next output byte should be put there */ | |
| uInt avail_out; /* remaining free space at next_out */ | |
| uLong total_out; /* total nb of bytes output so far */ | |
| char *msg; /* last error message, NULL if no error */ | |
| struct internal_state FAR *state; /* not visible by applications */ | |
| alloc_func zalloc; /* used to allocate the internal state */ | |
| free_func zfree; /* used to free the internal state */ | |
| voidp opaque; /* private data object passed to zalloc and zfree */ | |
| Byte data_type; /* best guess about the data type: ascii or binary */ | |
| } z_stream; | |
| /* | |
| The application must update next_in and avail_in when avail_in has | |
| dropped to zero. It must update next_out and avail_out when avail_out | |
| has dropped to zero. The application must initialize zalloc, zfree and | |
| opaque before calling the init function. All other fields are set by the | |
| compression library and must not be updated by the application. | |
| The opaque value provided by the application will be passed as the first | |
| parameter for calls of zalloc and zfree. This can be useful for custom | |
| memory management. The compression library attaches no meaning to the | |
| opaque value. | |
| zalloc must return Z_NULL if there is not enough memory for the object. | |
| On 16-bit systems, the functions zalloc and zfree must be able to allocate | |
| exactly 65536 bytes, but will not be required to allocate more than this | |
| if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, | |
| pointers returned by zalloc for objects of exactly 65536 bytes *must* | |
| have their offset normalized to zero. The default allocation function | |
| provided by this library ensures this (see zutil.c). To reduce memory | |
| requirements and avoid any allocation of 64K objects, at the expense of | |
| compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). | |
| The fields total_in and total_out can be used for statistics or | |
| progress reports. After compression, total_in holds the total size of | |
| the uncompressed data and may be saved for use in the decompressor | |
| (particularly if the decompressor wants to decompress everything in | |
| a single step). | |
| */ | |
| /* constants */ | |
| #define Z_NO_FLUSH 0 | |
| #define Z_PARTIAL_FLUSH 1 | |
| #define Z_FULL_FLUSH 2 | |
| #define Z_SYNC_FLUSH 3 /* experimental: partial_flush + byte align */ | |
| #define Z_FINISH 4 | |
| #define Z_PACKET_FLUSH 5 | |
| /* See deflate() below for the usage of these constants */ | |
| #define Z_OK 0 | |
| #define Z_STREAM_END 1 | |
| #define Z_ERRNO (-1) | |
| #define Z_STREAM_ERROR (-2) | |
| #define Z_DATA_ERROR (-3) | |
| #define Z_MEM_ERROR (-4) | |
| #define Z_BUF_ERROR (-5) | |
| /* error codes for the compression/decompression functions */ | |
| #define Z_BEST_SPEED 1 | |
| #define Z_BEST_COMPRESSION 9 | |
| #define Z_DEFAULT_COMPRESSION (-1) | |
| /* compression levels */ | |
| #define Z_FILTERED 1 | |
| #define Z_HUFFMAN_ONLY 2 | |
| #define Z_DEFAULT_STRATEGY 0 | |
| #define Z_BINARY 0 | |
| #define Z_ASCII 1 | |
| #define Z_UNKNOWN 2 | |
| /* Used to set the data_type field */ | |
| #define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ | |
| extern char *zlib_version; | |
| /* The application can compare zlib_version and ZLIB_VERSION for consistency. | |
| If the first character differs, the library code actually used is | |
| not compatible with the zlib.h header file used by the application. | |
| */ | |
| /* basic functions */ | |
| extern int deflateInit OF((z_stream *strm, int level)); | |
| /* | |
| Initializes the internal stream state for compression. The fields | |
| zalloc, zfree and opaque must be initialized before by the caller. | |
| If zalloc and zfree are set to Z_NULL, deflateInit updates them to | |
| use default allocation functions. | |
| The compression level must be Z_DEFAULT_COMPRESSION, or between 1 and 9: | |
| 1 gives best speed, 9 gives best compression. Z_DEFAULT_COMPRESSION requests | |
| a default compromise between speed and compression (currently equivalent | |
| to level 6). | |
| deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not | |
| enough memory, Z_STREAM_ERROR if level is not a valid compression level. | |
| msg is set to null if there is no error message. deflateInit does not | |
| perform any compression: this will be done by deflate(). | |
| */ | |
| extern int deflate OF((z_stream *strm, int flush)); | |
| /* | |
| Performs one or both of the following actions: | |
| - Compress more input starting at next_in and update next_in and avail_in | |
| accordingly. If not all input can be processed (because there is not | |
| enough room in the output buffer), next_in and avail_in are updated and | |
| processing will resume at this point for the next call of deflate(). | |
| - Provide more output starting at next_out and update next_out and avail_out | |
| accordingly. This action is forced if the parameter flush is non zero. | |
| Forcing flush frequently degrades the compression ratio, so this parameter | |
| should be set only when necessary (in interactive applications). | |
| Some output may be provided even if flush is not set. | |
| Before the call of deflate(), the application should ensure that at least | |
| one of the actions is possible, by providing more input and/or consuming | |
| more output, and updating avail_in or avail_out accordingly; avail_out | |
| should never be zero before the call. The application can consume the | |
| compressed output when it wants, for example when the output buffer is full | |
| (avail_out == 0), or after each call of deflate(). | |
| If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression | |
| block is terminated and flushed to the output buffer so that the | |
| decompressor can get all input data available so far. For method 9, a future | |
| variant on method 8, the current block will be flushed but not terminated. | |
| If flush is set to Z_FULL_FLUSH, the compression block is terminated, a | |
| special marker is output and the compression dictionary is discarded; this | |
| is useful to allow the decompressor to synchronize if one compressed block | |
| has been damaged (see inflateSync below). Flushing degrades compression and | |
| so should be used only when necessary. Using Z_FULL_FLUSH too often can | |
| seriously degrade the compression. If deflate returns with avail_out == 0, | |
| this function must be called again with the same value of the flush | |
| parameter and more output space (updated avail_out), until the flush is | |
| complete (deflate returns with non-zero avail_out). | |
| If the parameter flush is set to Z_PACKET_FLUSH, the compression | |
| block is terminated, and a zero-length stored block is output, | |
| omitting the length bytes (the effect of this is that the 3-bit type | |
| code 000 for a stored block is output, and the output is then | |
| byte-aligned). This is designed for use at the end of a PPP packet. | |
| In addition, if the current compression block contains all the data | |
| since the last Z_PACKET_FLUSH, it is never output as a stored block. | |
| If the current compression block output as a static or dynamic block | |
| would not be at least `minCompression' bytes smaller than the | |
| original data, then nothing is output for that block. (The type | |
| code for the zero-length stored block is still output, resulting in | |
| a single zero byte being output for the whole packet.) | |
| `MinCompression' is a parameter to deflateInit2, or 0 if deflateInit | |
| is used. | |
| If the parameter flush is set to Z_FINISH, all pending input is processed, | |
| all pending output is flushed and deflate returns with Z_STREAM_END if there | |
| was enough output space; if deflate returns with Z_OK, this function must be | |
| called again with Z_FINISH and more output space (updated avail_out) but no | |
| more input data, until it returns with Z_STREAM_END or an error. After | |
| deflate has returned Z_STREAM_END, the only possible operations on the | |
| stream are deflateReset or deflateEnd. | |
| Z_FINISH can be used immediately after deflateInit if all the compression | |
| is to be done in a single step. In this case, avail_out must be at least | |
| 0.1% larger than avail_in plus 12 bytes. If deflate does not return | |
| Z_STREAM_END, then it must be called again as described above. | |
| deflate() may update data_type if it can make a good guess about | |
| the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered | |
| binary. This field is only for information purposes and does not affect | |
| the compression algorithm in any manner. | |
| deflate() returns Z_OK if some progress has been made (more input | |
| processed or more output produced), Z_STREAM_END if all input has been | |
| consumed and all output has been produced (only when flush is set to | |
| Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example | |
| if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible. | |
| */ | |
| extern int deflateEnd OF((z_stream *strm)); | |
| /* | |
| All dynamically allocated data structures for this stream are freed. | |
| This function discards any unprocessed input and does not flush any | |
| pending output. | |
| deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the | |
| stream state was inconsistent. In the error case, msg may be set | |
| but then points to a static string (which must not be deallocated). | |
| */ | |
| extern int inflateInit OF((z_stream *strm)); | |
| /* | |
| Initializes the internal stream state for decompression. The fields | |
| zalloc and zfree must be initialized before by the caller. If zalloc and | |
| zfree are set to Z_NULL, inflateInit updates them to use default allocation | |
| functions. | |
| inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not | |
| enough memory. msg is set to null if there is no error message. | |
| inflateInit does not perform any decompression: this will be done by | |
| inflate(). | |
| */ | |
| extern int inflate OF((z_stream *strm, int flush)); | |
| /* | |
| Performs one or both of the following actions: | |
| - Decompress more input starting at next_in and update next_in and avail_in | |
| accordingly. If not all input can be processed (because there is not | |
| enough room in the output buffer), next_in is updated and processing | |
| will resume at this point for the next call of inflate(). | |
| - Provide more output starting at next_out and update next_out and avail_out | |
| accordingly. inflate() always provides as much output as possible | |
| (until there is no more input data or no more space in the output buffer). | |
| Before the call of inflate(), the application should ensure that at least | |
| one of the actions is possible, by providing more input and/or consuming | |
| more output, and updating the next_* and avail_* values accordingly. | |
| The application can consume the uncompressed output when it wants, for | |
| example when the output buffer is full (avail_out == 0), or after each | |
| call of inflate(). | |
| If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH, | |
| inflate flushes as much output as possible to the output buffer. The | |
| flushing behavior of inflate is not specified for values of the flush | |
| parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the | |
| current implementation actually flushes as much output as possible | |
| anyway. For Z_PACKET_FLUSH, inflate checks that once all the input data | |
| has been consumed, it is expecting to see the length field of a stored | |
| block; if not, it returns Z_DATA_ERROR. | |
| inflate() should normally be called until it returns Z_STREAM_END or an | |
| error. However if all decompression is to be performed in a single step | |
| (a single call of inflate), the parameter flush should be set to | |
| Z_FINISH. In this case all pending input is processed and all pending | |
| output is flushed; avail_out must be large enough to hold all the | |
| uncompressed data. (The size of the uncompressed data may have been saved | |
| by the compressor for this purpose.) The next operation on this stream must | |
| be inflateEnd to deallocate the decompression state. The use of Z_FINISH | |
| is never required, but can be used to inform inflate that a faster routine | |
| may be used for the single inflate() call. | |
| inflate() returns Z_OK if some progress has been made (more input | |
| processed or more output produced), Z_STREAM_END if the end of the | |
| compressed data has been reached and all uncompressed output has been | |
| produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if | |
| the stream structure was inconsistent (for example if next_in or next_out | |
| was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no | |
| progress is possible or if there was not enough room in the output buffer | |
| when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then | |
| call inflateSync to look for a good compression block. */ | |
| extern int inflateEnd OF((z_stream *strm)); | |
| /* | |
| All dynamically allocated data structures for this stream are freed. | |
| This function discards any unprocessed input and does not flush any | |
| pending output. | |
| inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state | |
| was inconsistent. In the error case, msg may be set but then points to a | |
| static string (which must not be deallocated). | |
| */ | |
| /* advanced functions */ | |
| /* | |
| The following functions are needed only in some special applications. | |
| */ | |
| extern int deflateInit2 OF((z_stream *strm, | |
| int level, | |
| int method, | |
| int windowBits, | |
| int memLevel, | |
| int strategy, | |
| int minCompression)); | |
| /* | |
| This is another version of deflateInit with more compression options. The | |
| fields next_in, zalloc and zfree must be initialized before by the caller. | |
| The method parameter is the compression method. It must be 8 in this | |
| version of the library. (Method 9 will allow a 64K history buffer and | |
| partial block flushes.) | |
| The windowBits parameter is the base two logarithm of the window size | |
| (the size of the history buffer). It should be in the range 8..15 for this | |
| version of the library (the value 16 will be allowed for method 9). Larger | |
| values of this parameter result in better compression at the expense of | |
| memory usage. The default value is 15 if deflateInit is used instead. | |
| The memLevel parameter specifies how much memory should be allocated | |
| for the internal compression state. memLevel=1 uses minimum memory but | |
| is slow and reduces compression ratio; memLevel=9 uses maximum memory | |
| for optimal speed. The default value is 8. See zconf.h for total memory | |
| usage as a function of windowBits and memLevel. | |
| The strategy parameter is used to tune the compression algorithm. Use | |
| the value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data | |
| produced by a filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman | |
| encoding only (no string match). Filtered data consists mostly of small | |
| values with a somewhat random distribution. In this case, the | |
| compression algorithm is tuned to compress them better. The strategy | |
| parameter only affects the compression ratio but not the correctness of | |
| the compressed output even if it is not set appropriately. | |
| The minCompression parameter specifies the minimum reduction in size | |
| required for a compressed block to be output when Z_PACKET_FLUSH is | |
| used (see the description of deflate above). | |
| If next_in is not null, the library will use this buffer to hold also | |
| some history information; the buffer must either hold the entire input | |
| data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in | |
| is null, the library will allocate its own history buffer (and leave next_in | |
| null). next_out need not be provided here but must be provided by the | |
| application for the next call of deflate(). | |
| If the history buffer is provided by the application, next_in must | |
| must never be changed by the application since the compressor maintains | |
| information inside this buffer from call to call; the application | |
| must provide more input only by increasing avail_in. next_in is always | |
| reset by the library in this case. | |
| deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was | |
| not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as | |
| an invalid method). msg is set to null if there is no error message. | |
| deflateInit2 does not perform any compression: this will be done by | |
| deflate(). | |
| */ | |
| extern int deflateCopy OF((z_stream *dest, | |
| z_stream *source)); | |
| /* | |
| Sets the destination stream as a complete copy of the source stream. If | |
| the source stream is using an application-supplied history buffer, a new | |
| buffer is allocated for the destination stream. The compressed output | |
| buffer is always application-supplied. It's the responsibility of the | |
| application to provide the correct values of next_out and avail_out for the | |
| next call of deflate. | |
| This function is useful when several compression strategies will be | |
| tried, for example when there are several ways of pre-processing the input | |
| data with a filter. The streams that will be discarded should then be freed | |
| by calling deflateEnd. Note that deflateCopy duplicates the internal | |
| compression state which can be quite large, so this strategy is slow and | |
| can consume lots of memory. | |
| deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not | |
| enough memory, Z_STREAM_ERROR if the source stream state was inconsistent | |
| (such as zalloc being NULL). msg is left unchanged in both source and | |
| destination. | |
| */ | |
| extern int deflateReset OF((z_stream *strm)); | |
| /* | |
| This function is equivalent to deflateEnd followed by deflateInit, | |
| but does not free and reallocate all the internal compression state. | |
| The stream will keep the same compression level and any other attributes | |
| that may have been set by deflateInit2. | |
| deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source | |
| stream state was inconsistent (such as zalloc or state being NULL). | |
| */ | |
| extern int inflateInit2 OF((z_stream *strm, | |
| int windowBits)); | |
| /* | |
| This is another version of inflateInit with more compression options. The | |
| fields next_out, zalloc and zfree must be initialized before by the caller. | |
| The windowBits parameter is the base two logarithm of the maximum window | |
| size (the size of the history buffer). It should be in the range 8..15 for | |
| this version of the library (the value 16 will be allowed soon). The | |
| default value is 15 if inflateInit is used instead. If a compressed stream | |
| with a larger window size is given as input, inflate() will return with | |
| the error code Z_DATA_ERROR instead of trying to allocate a larger window. | |
| If next_out is not null, the library will use this buffer for the history | |
| buffer; the buffer must either be large enough to hold the entire output | |
| data, or have at least 1<<windowBits bytes. If next_out is null, the | |
| library will allocate its own buffer (and leave next_out null). next_in | |
| need not be provided here but must be provided by the application for the | |
| next call of inflate(). | |
| If the history buffer is provided by the application, next_out must | |
| never be changed by the application since the decompressor maintains | |
| history information inside this buffer from call to call; the application | |
| can only reset next_out to the beginning of the history buffer when | |
| avail_out is zero and all output has been consumed. | |
| inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was | |
| not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as | |
| windowBits < 8). msg is set to null if there is no error message. | |
| inflateInit2 does not perform any decompression: this will be done by | |
| inflate(). | |
| */ | |
| extern int inflateSync OF((z_stream *strm)); | |
| /* | |
| Skips invalid compressed data until the special marker (see deflate() | |
| above) can be found, or until all available input is skipped. No output | |
| is provided. | |
| inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR | |
| if no more input was provided, Z_DATA_ERROR if no marker has been found, | |
| or Z_STREAM_ERROR if the stream structure was inconsistent. In the success | |
| case, the application may save the current current value of total_in which | |
| indicates where valid compressed data was found. In the error case, the | |
| application may repeatedly call inflateSync, providing more input each time, | |
| until success or end of the input data. | |
| */ | |
| extern int inflateReset OF((z_stream *strm)); | |
| /* | |
| This function is equivalent to inflateEnd followed by inflateInit, | |
| but does not free and reallocate all the internal decompression state. | |
| The stream will keep attributes that may have been set by inflateInit2. | |
| inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source | |
| stream state was inconsistent (such as zalloc or state being NULL). | |
| */ | |
| extern int inflateIncomp OF((z_stream *strm)); | |
| /* | |
| This function adds the data at next_in (avail_in bytes) to the output | |
| history without performing any output. There must be no pending output, | |
| and the decompressor must be expecting to see the start of a block. | |
| Calling this function is equivalent to decompressing a stored block | |
| containing the data at next_in (except that the data is not output). | |
| */ | |
| /* checksum functions */ | |
| /* | |
| This function is not related to compression but is exported | |
| anyway because it might be useful in applications using the | |
| compression library. | |
| */ | |
| extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len)); | |
| /* | |
| Update a running Adler-32 checksum with the bytes buf[0..len-1] and | |
| return the updated checksum. If buf is NULL, this function returns | |
| the required initial value for the checksum. | |
| An Adler-32 checksum is almost as reliable as a CRC32 but can be computed | |
| much faster. Usage example: | |
| uLong adler = adler32(0L, Z_NULL, 0); | |
| while (read_buffer(buffer, length) != EOF) { | |
| adler = adler32(adler, buffer, length); | |
| } | |
| if (adler != original_adler) error(); | |
| */ | |
| #ifndef _Z_UTIL_H | |
| struct internal_state {int dummy;}; /* hack for buggy compilers */ | |
| #endif | |
| #endif /* _ZLIB_H */ |