/*
 * Copyright 2011 Freescale Semiconductor, Inc.
 * Copyright 2011 Linaro Ltd.
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/include/ "skeleton.dtsi"

/ {
	aliases {
		serial0 = &uart1;
		serial1 = &uart2;
		serial2 = &uart3;
		gpio0 = &gpio1;
		gpio1 = &gpio2;
		gpio2 = &gpio3;
		gpio3 = &gpio4;
	};

	tzic: tz-interrupt-controller@e0000000 {
		compatible = "fsl,imx51-tzic", "fsl,tzic";
		interrupt-controller;
		#interrupt-cells = <1>;
		reg = <0xe0000000 0x4000>;
	};

	clocks {
		#address-cells = <1>;
		#size-cells = <0>;

		ckil {
			compatible = "fsl,imx-ckil", "fixed-clock";
			clock-frequency = <32768>;
		};

		ckih1 {
			compatible = "fsl,imx-ckih1", "fixed-clock";
			clock-frequency = <22579200>;
		};

		ckih2 {
			compatible = "fsl,imx-ckih2", "fixed-clock";
			clock-frequency = <0>;
		};

		osc {
			compatible = "fsl,imx-osc", "fixed-clock";
			clock-frequency = <24000000>;
		};
	};

	soc {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		interrupt-parent = <&tzic>;
		ranges;

		ipu: ipu@40000000 {
			#crtc-cells = <1>;
			compatible = "fsl,imx51-ipu";
			reg = <0x40000000 0x20000000>;
			interrupts = <11 10>;
		};

		aips@70000000 { /* AIPS1 */
			compatible = "fsl,aips-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x70000000 0x10000000>;
			ranges;

			spba@70000000 {
				compatible = "fsl,spba-bus", "simple-bus";
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0x70000000 0x40000>;
				ranges;

				esdhc1: esdhc@70004000 {
					compatible = "fsl,imx51-esdhc";
					reg = <0x70004000 0x4000>;
					interrupts = <1>;
					clocks = <&clks 44>, <&clks 0>, <&clks 71>;
					clock-names = "ipg", "ahb", "per";
					status = "disabled";
				};

				esdhc2: esdhc@70008000 {
					compatible = "fsl,imx51-esdhc";
					reg = <0x70008000 0x4000>;
					interrupts = <2>;
					clocks = <&clks 45>, <&clks 0>, <&clks 72>;
					clock-names = "ipg", "ahb", "per";
					bus-width = <4>;
					status = "disabled";
				};

				uart3: serial@7000c000 {
					compatible = "fsl,imx51-uart", "fsl,imx21-uart";
					reg = <0x7000c000 0x4000>;
					interrupts = <33>;
					clocks = <&clks 32>, <&clks 33>;
					clock-names = "ipg", "per";
					status = "disabled";
				};

				ecspi1: ecspi@70010000 {
					#address-cells = <1>;
					#size-cells = <0>;
					compatible = "fsl,imx51-ecspi";
					reg = <0x70010000 0x4000>;
					interrupts = <36>;
					clocks = <&clks 51>, <&clks 52>;
					clock-names = "ipg", "per";
					status = "disabled";
				};

				ssi2: ssi@70014000 {
					compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
					reg = <0x70014000 0x4000>;
					interrupts = <30>;
					clocks = <&clks 49>;
					fsl,fifo-depth = <15>;
					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
					status = "disabled";
				};

				esdhc3: esdhc@70020000 {
					compatible = "fsl,imx51-esdhc";
					reg = <0x70020000 0x4000>;
					interrupts = <3>;
					clocks = <&clks 46>, <&clks 0>, <&clks 73>;
					clock-names = "ipg", "ahb", "per";
					bus-width = <4>;
					status = "disabled";
				};

				esdhc4: esdhc@70024000 {
					compatible = "fsl,imx51-esdhc";
					reg = <0x70024000 0x4000>;
					interrupts = <4>;
					clocks = <&clks 47>, <&clks 0>, <&clks 74>;
					clock-names = "ipg", "ahb", "per";
					bus-width = <4>;
					status = "disabled";
				};
			};

			usbotg: usb@73f80000 {
				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
				reg = <0x73f80000 0x0200>;
				interrupts = <18>;
				status = "disabled";
			};

			usbh1: usb@73f80200 {
				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
				reg = <0x73f80200 0x0200>;
				interrupts = <14>;
				status = "disabled";
			};

			usbh2: usb@73f80400 {
				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
				reg = <0x73f80400 0x0200>;
				interrupts = <16>;
				status = "disabled";
			};

			usbh3: usb@73f80600 {
				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
				reg = <0x73f80600 0x0200>;
				interrupts = <17>;
				status = "disabled";
			};

			gpio1: gpio@73f84000 {
				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
				reg = <0x73f84000 0x4000>;
				interrupts = <50 51>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio2: gpio@73f88000 {
				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
				reg = <0x73f88000 0x4000>;
				interrupts = <52 53>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio3: gpio@73f8c000 {
				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
				reg = <0x73f8c000 0x4000>;
				interrupts = <54 55>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio4: gpio@73f90000 {
				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
				reg = <0x73f90000 0x4000>;
				interrupts = <56 57>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			wdog1: wdog@73f98000 {
				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
				reg = <0x73f98000 0x4000>;
				interrupts = <58>;
				clocks = <&clks 0>;
			};

			wdog2: wdog@73f9c000 {
				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
				reg = <0x73f9c000 0x4000>;
				interrupts = <59>;
				clocks = <&clks 0>;
				status = "disabled";
			};

			iomuxc: iomuxc@73fa8000 {
				compatible = "fsl,imx51-iomuxc";
				reg = <0x73fa8000 0x4000>;

				audmux {
					pinctrl_audmux_1: audmuxgrp-1 {
						fsl,pins = <
							384 0x80000000	/* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */
							386 0x80000000	/* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */
							389 0x80000000	/* MX51_PAD_AUD3_BB_CK__AUD3_TXC */
							391 0x80000000	/* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */
						>;
					};
				};

				fec {
					pinctrl_fec_1: fecgrp-1 {
						fsl,pins = <
							128 0x80000000	/* MX51_PAD_EIM_EB2__FEC_MDIO */
							134 0x80000000	/* MX51_PAD_EIM_EB3__FEC_RDATA1 */
							146 0x80000000	/* MX51_PAD_EIM_CS2__FEC_RDATA2 */
							152 0x80000000	/* MX51_PAD_EIM_CS3__FEC_RDATA3 */
							158 0x80000000	/* MX51_PAD_EIM_CS4__FEC_RX_ER */
							165 0x80000000	/* MX51_PAD_EIM_CS5__FEC_CRS */
							206 0x80000000	/* MX51_PAD_NANDF_RB2__FEC_COL */
							213 0x80000000	/* MX51_PAD_NANDF_RB3__FEC_RX_CLK */
							293 0x80000000	/* MX51_PAD_NANDF_D9__FEC_RDATA0 */
							298 0x80000000	/* MX51_PAD_NANDF_D8__FEC_TDATA0 */
							225 0x80000000	/* MX51_PAD_NANDF_CS2__FEC_TX_ER */
							231 0x80000000	/* MX51_PAD_NANDF_CS3__FEC_MDC */
							237 0x80000000	/* MX51_PAD_NANDF_CS4__FEC_TDATA1 */
							243 0x80000000	/* MX51_PAD_NANDF_CS5__FEC_TDATA2 */
							250 0x80000000	/* MX51_PAD_NANDF_CS6__FEC_TDATA3 */
							255 0x80000000	/* MX51_PAD_NANDF_CS7__FEC_TX_EN */
							260 0x80000000	/* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */
						>;
					};
				};

				ecspi1 {
					pinctrl_ecspi1_1: ecspi1grp-1 {
						fsl,pins = <
							398 0x185	/* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */
							394 0x185	/* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */
							409 0x185	/* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */
						>;
					};
				};

				esdhc1 {
					pinctrl_esdhc1_1: esdhc1grp-1 {
						fsl,pins = <
							666 0x400020d5	/* MX51_PAD_SD1_CMD__SD1_CMD */
							669 0x20d5	/* MX51_PAD_SD1_CLK__SD1_CLK */
							672 0x20d5	/* MX51_PAD_SD1_DATA0__SD1_DATA0 */
							678 0x20d5	/* MX51_PAD_SD1_DATA1__SD1_DATA1 */
							684 0x20d5	/* MX51_PAD_SD1_DATA2__SD1_DATA2 */
							691 0x20d5	/* MX51_PAD_SD1_DATA3__SD1_DATA3 */
						>;
					};
				};

				esdhc2 {
					pinctrl_esdhc2_1: esdhc2grp-1 {
						fsl,pins = <
							704 0x400020d5	/* MX51_PAD_SD2_CMD__SD2_CMD */
							707 0x20d5	/* MX51_PAD_SD2_CLK__SD2_CLK */
							710 0x20d5	/* MX51_PAD_SD2_DATA0__SD2_DATA0 */
							712 0x20d5	/* MX51_PAD_SD2_DATA1__SD2_DATA1 */
							715 0x20d5	/* MX51_PAD_SD2_DATA2__SD2_DATA2 */
							719 0x20d5	/* MX51_PAD_SD2_DATA3__SD2_DATA3 */
						>;
					};
				};

				i2c2 {
					pinctrl_i2c2_1: i2c2grp-1 {
						fsl,pins = <
							449 0x400001ed	/* MX51_PAD_KEY_COL4__I2C2_SCL */
							454 0x400001ed	/* MX51_PAD_KEY_COL5__I2C2_SDA */
						>;
					};
				};

				ipu_disp1 {
					pinctrl_ipu_disp1_1: ipudisp1grp-1 {
						fsl,pins = <
							528 0x5 /* MX51_PAD_DISP1_DAT0__DISP1_DAT0 */
							529 0x5 /* MX51_PAD_DISP1_DAT1__DISP1_DAT1 */
							530 0x5 /* MX51_PAD_DISP1_DAT2__DISP1_DAT2 */
							531 0x5 /* MX51_PAD_DISP1_DAT3__DISP1_DAT3 */
							532 0x5 /* MX51_PAD_DISP1_DAT4__DISP1_DAT4 */
							533 0x5 /* MX51_PAD_DISP1_DAT5__DISP1_DAT5 */
							535 0x5 /* MX51_PAD_DISP1_DAT6__DISP1_DAT6 */
							537 0x5 /* MX51_PAD_DISP1_DAT7__DISP1_DAT7 */
							539 0x5 /* MX51_PAD_DISP1_DAT8__DISP1_DAT8 */
							541 0x5 /* MX51_PAD_DISP1_DAT9__DISP1_DAT9 */
							543 0x5 /* MX51_PAD_DISP1_DAT10__DISP1_DAT10 */
							545 0x5 /* MX51_PAD_DISP1_DAT11__DISP1_DAT11 */
							547 0x5 /* MX51_PAD_DISP1_DAT12__DISP1_DAT12 */
							549 0x5 /* MX51_PAD_DISP1_DAT13__DISP1_DAT13 */
							551 0x5 /* MX51_PAD_DISP1_DAT14__DISP1_DAT14 */
							553 0x5 /* MX51_PAD_DISP1_DAT15__DISP1_DAT15 */
							555 0x5 /* MX51_PAD_DISP1_DAT16__DISP1_DAT16 */
							557 0x5 /* MX51_PAD_DISP1_DAT17__DISP1_DAT17 */
							559 0x5 /* MX51_PAD_DISP1_DAT18__DISP1_DAT18 */
							563 0x5 /* MX51_PAD_DISP1_DAT19__DISP1_DAT19 */
							567 0x5 /* MX51_PAD_DISP1_DAT20__DISP1_DAT20 */
							571 0x5 /* MX51_PAD_DISP1_DAT21__DISP1_DAT21 */
							575 0x5 /* MX51_PAD_DISP1_DAT22__DISP1_DAT22 */
							579 0x5 /* MX51_PAD_DISP1_DAT23__DISP1_DAT23 */
							584 0x5 /* MX51_PAD_DI1_PIN2__DI1_PIN2 (hsync) */
							583 0x5 /* MX51_PAD_DI1_PIN3__DI1_PIN3 (vsync) */
						>;
					};
				};

				ipu_disp2 {
					pinctrl_ipu_disp2_1: ipudisp2grp-1 {
						fsl,pins = <
							603 0x5 /* MX51_PAD_DISP2_DAT0__DISP2_DAT0 */
							608 0x5 /* MX51_PAD_DISP2_DAT1__DISP2_DAT1 */
							613 0x5 /* MX51_PAD_DISP2_DAT2__DISP2_DAT2 */
							614 0x5 /* MX51_PAD_DISP2_DAT3__DISP2_DAT3 */
							615 0x5 /* MX51_PAD_DISP2_DAT4__DISP2_DAT4 */
							616 0x5 /* MX51_PAD_DISP2_DAT5__DISP2_DAT5 */
							617 0x5 /* MX51_PAD_DISP2_DAT6__DISP2_DAT6 */
							622 0x5 /* MX51_PAD_DISP2_DAT7__DISP2_DAT7 */
							627 0x5 /* MX51_PAD_DISP2_DAT8__DISP2_DAT8 */
							633 0x5 /* MX51_PAD_DISP2_DAT9__DISP2_DAT9 */
							637 0x5 /* MX51_PAD_DISP2_DAT10__DISP2_DAT10 */
							643 0x5 /* MX51_PAD_DISP2_DAT11__DISP2_DAT11 */
							648 0x5 /* MX51_PAD_DISP2_DAT12__DISP2_DAT12 */
							652 0x5 /* MX51_PAD_DISP2_DAT13__DISP2_DAT13 */
							656 0x5 /* MX51_PAD_DISP2_DAT14__DISP2_DAT14 */
							661 0x5 /* MX51_PAD_DISP2_DAT15__DISP2_DAT15 */
							593 0x5 /* MX51_PAD_DI2_PIN2__DI2_PIN2 (hsync) */
							595 0x5 /* MX51_PAD_DI2_PIN3__DI2_PIN3 (vsync) */
							597 0x5 /* MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK */
							599 0x5 /* MX51_PAD_DI_GP4__DI2_PIN15 */
						>;
					};
				};

				uart1 {
					pinctrl_uart1_1: uart1grp-1 {
						fsl,pins = <
							413 0x1c5	/* MX51_PAD_UART1_RXD__UART1_RXD */
							416 0x1c5	/* MX51_PAD_UART1_TXD__UART1_TXD */
							418 0x1c5	/* MX51_PAD_UART1_RTS__UART1_RTS */
							420 0x1c5	/* MX51_PAD_UART1_CTS__UART1_CTS */
						>;
					};
				};

				uart2 {
					pinctrl_uart2_1: uart2grp-1 {
						fsl,pins = <
							423 0x1c5	/* MX51_PAD_UART2_RXD__UART2_RXD */
							426 0x1c5	/* MX51_PAD_UART2_TXD__UART2_TXD */
						>;
					};
				};

				uart3 {
					pinctrl_uart3_1: uart3grp-1 {
						fsl,pins = <
							54 0x1c5	/* MX51_PAD_EIM_D25__UART3_RXD */
							59 0x1c5	/* MX51_PAD_EIM_D26__UART3_TXD */
							65 0x1c5	/* MX51_PAD_EIM_D27__UART3_RTS */
							49 0x1c5	/* MX51_PAD_EIM_D24__UART3_CTS */
						>;
					};
				};
			};

			pwm1: pwm@73fb4000 {
				#pwm-cells = <2>;
				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
				reg = <0x73fb4000 0x4000>;
				clocks = <&clks 37>, <&clks 38>;
				clock-names = "ipg", "per";
				interrupts = <61>;
			};

			pwm2: pwm@73fb8000 {
				#pwm-cells = <2>;
				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
				reg = <0x73fb8000 0x4000>;
				clocks = <&clks 39>, <&clks 40>;
				clock-names = "ipg", "per";
				interrupts = <94>;
			};

			uart1: serial@73fbc000 {
				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
				reg = <0x73fbc000 0x4000>;
				interrupts = <31>;
				clocks = <&clks 28>, <&clks 29>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			uart2: serial@73fc0000 {
				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
				reg = <0x73fc0000 0x4000>;
				interrupts = <32>;
				clocks = <&clks 30>, <&clks 31>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			clks: ccm@73fd4000{
				compatible = "fsl,imx51-ccm";
				reg = <0x73fd4000 0x4000>;
				interrupts = <0 71 0x04 0 72 0x04>;
				#clock-cells = <1>;
			};
		};

		aips@80000000 {	/* AIPS2 */
			compatible = "fsl,aips-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x80000000 0x10000000>;
			ranges;

			ecspi2: ecspi@83fac000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx51-ecspi";
				reg = <0x83fac000 0x4000>;
				interrupts = <37>;
				clocks = <&clks 53>, <&clks 54>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			sdma: sdma@83fb0000 {
				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
				reg = <0x83fb0000 0x4000>;
				interrupts = <6>;
				clocks = <&clks 56>, <&clks 56>;
				clock-names = "ipg", "ahb";
				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
			};

			cspi: cspi@83fc0000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
				reg = <0x83fc0000 0x4000>;
				interrupts = <38>;
				clocks = <&clks 55>, <&clks 0>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			i2c2: i2c@83fc4000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
				reg = <0x83fc4000 0x4000>;
				interrupts = <63>;
				clocks = <&clks 35>;
				status = "disabled";
			};

			i2c1: i2c@83fc8000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
				reg = <0x83fc8000 0x4000>;
				interrupts = <62>;
				clocks = <&clks 34>;
				status = "disabled";
			};

			ssi1: ssi@83fcc000 {
				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
				reg = <0x83fcc000 0x4000>;
				interrupts = <29>;
				clocks = <&clks 48>;
				fsl,fifo-depth = <15>;
				fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
				status = "disabled";
			};

			audmux: audmux@83fd0000 {
				compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
				reg = <0x83fd0000 0x4000>;
				status = "disabled";
			};

			nfc: nand@83fdb000 {
				compatible = "fsl,imx51-nand";
				reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
				interrupts = <8>;
				clocks = <&clks 60>;
				status = "disabled";
			};

			ssi3: ssi@83fe8000 {
				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
				reg = <0x83fe8000 0x4000>;
				interrupts = <96>;
				clocks = <&clks 50>;
				fsl,fifo-depth = <15>;
				fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
				status = "disabled";
			};

			fec: ethernet@83fec000 {
				compatible = "fsl,imx51-fec", "fsl,imx27-fec";
				reg = <0x83fec000 0x4000>;
				interrupts = <87>;
				clocks = <&clks 42>, <&clks 42>, <&clks 42>;
				clock-names = "ipg", "ahb", "ptp";
				status = "disabled";
			};
		};
	};
};