blob: edc3f1eb6699238b776a1affc9f647103dfdc4ca [file] [log] [blame]
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
aliases {
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
gpio5 = &gpio6;
gpio6 = &gpio7;
};
tzic: tz-interrupt-controller@0fffc000 {
compatible = "fsl,imx53-tzic", "fsl,tzic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x0fffc000 0x4000>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
clock-frequency = <22579200>;
};
ckih2 {
compatible = "fsl,imx-ckih2", "fixed-clock";
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
clock-frequency = <24000000>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&tzic>;
ranges;
ipu: ipu@18000000 {
#crtc-cells = <1>;
compatible = "fsl,imx53-ipu";
reg = <0x18000000 0x080000000>;
interrupts = <11 10>;
};
aips@50000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x50000000 0x10000000>;
ranges;
spba@50000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x50000000 0x40000>;
ranges;
esdhc1: esdhc@50004000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50004000 0x4000>;
interrupts = <1>;
clocks = <&clks 44>, <&clks 0>, <&clks 71>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
esdhc2: esdhc@50008000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50008000 0x4000>;
interrupts = <2>;
clocks = <&clks 45>, <&clks 0>, <&clks 72>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
uart3: serial@5000c000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <33>;
clocks = <&clks 32>, <&clks 33>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi1: ecspi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x50010000 0x4000>;
interrupts = <36>;
clocks = <&clks 51>, <&clks 52>;
clock-names = "ipg", "per";
status = "disabled";
};
ssi2: ssi@50014000 {
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <30>;
clocks = <&clks 49>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
esdhc3: esdhc@50020000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
interrupts = <3>;
clocks = <&clks 46>, <&clks 0>, <&clks 73>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
esdhc4: esdhc@50024000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50024000 0x4000>;
interrupts = <4>;
clocks = <&clks 47>, <&clks 0>, <&clks 74>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
};
usbotg: usb@53f80000 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80000 0x0200>;
interrupts = <18>;
status = "disabled";
};
usbh1: usb@53f80200 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80200 0x0200>;
interrupts = <14>;
status = "disabled";
};
usbh2: usb@53f80400 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80400 0x0200>;
interrupts = <16>;
status = "disabled";
};
usbh3: usb@53f80600 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80600 0x0200>;
interrupts = <17>;
status = "disabled";
};
gpio1: gpio@53f84000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53f84000 0x4000>;
interrupts = <50 51>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@53f88000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53f88000 0x4000>;
interrupts = <52 53>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@53f8c000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53f8c000 0x4000>;
interrupts = <54 55>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@53f90000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53f90000 0x4000>;
interrupts = <56 57>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
wdog1: wdog@53f98000 {
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f98000 0x4000>;
interrupts = <58>;
clocks = <&clks 0>;
};
wdog2: wdog@53f9c000 {
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f9c000 0x4000>;
interrupts = <59>;
clocks = <&clks 0>;
status = "disabled";
};
iomuxc: iomuxc@53fa8000 {
compatible = "fsl,imx53-iomuxc";
reg = <0x53fa8000 0x4000>;
audmux {
pinctrl_audmux_1: audmuxgrp-1 {
fsl,pins = <
10 0x80000000 /* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */
17 0x80000000 /* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */
23 0x80000000 /* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */
30 0x80000000 /* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */
>;
};
};
fec {
pinctrl_fec_1: fecgrp-1 {
fsl,pins = <
820 0x80000000 /* MX53_PAD_FEC_MDC__FEC_MDC */
779 0x80000000 /* MX53_PAD_FEC_MDIO__FEC_MDIO */
786 0x80000000 /* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */
791 0x80000000 /* MX53_PAD_FEC_RX_ER__FEC_RX_ER */
796 0x80000000 /* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */
799 0x80000000 /* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */
804 0x80000000 /* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */
808 0x80000000 /* MX53_PAD_FEC_TX_EN__FEC_TX_EN */
811 0x80000000 /* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */
816 0x80000000 /* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */
>;
};
};
ecspi1 {
pinctrl_ecspi1_1: ecspi1grp-1 {
fsl,pins = <
433 0x80000000 /* MX53_PAD_EIM_D16__ECSPI1_SCLK */
439 0x80000000 /* MX53_PAD_EIM_D17__ECSPI1_MISO */
445 0x80000000 /* MX53_PAD_EIM_D18__ECSPI1_MOSI */
>;
};
};
esdhc1 {
pinctrl_esdhc1_1: esdhc1grp-1 {
fsl,pins = <
995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */
1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */
>;
};
pinctrl_esdhc1_2: esdhc1grp-2 {
fsl,pins = <
995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
941 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */
948 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */
955 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */
962 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */
1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */
1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */
>;
};
};
esdhc2 {
pinctrl_esdhc2_1: esdhc2grp-1 {
fsl,pins = <
1038 0x1d5 /* MX53_PAD_SD2_CMD__ESDHC2_CMD */
1032 0x1d5 /* MX53_PAD_SD2_CLK__ESDHC2_CLK */
1062 0x1d5 /* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */
1056 0x1d5 /* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */
1050 0x1d5 /* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */
1044 0x1d5 /* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */
>;
};
};
esdhc3 {
pinctrl_esdhc3_1: esdhc3grp-1 {
fsl,pins = <
943 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */
950 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */
957 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */
964 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */
893 0x1d5 /* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */
900 0x1d5 /* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */
906 0x1d5 /* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */
912 0x1d5 /* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */
857 0x1d5 /* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */
863 0x1d5 /* MX53_PAD_PATA_IORDY__ESDHC3_CLK */
>;
};
};
can1 {
pinctrl_can1_1: can1grp-1 {
fsl,pins = <
847 0x80000000 /* MX53_PAD_PATA_INTRQ__CAN1_TXCAN */
853 0x80000000 /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */
>;
};
};
can2 {
pinctrl_can2_1: can2grp-1 {
fsl,pins = <
67 0x80000000 /* MX53_PAD_KEY_COL4__CAN2_TXCAN */
74 0x80000000 /* MX53_PAD_KEY_ROW4__CAN2_RXCAN */
>;
};
};
i2c1 {
pinctrl_i2c1_1: i2c1grp-1 {
fsl,pins = <
333 0xc0000000 /* MX53_PAD_CSI0_DAT8__I2C1_SDA */
341 0xc0000000 /* MX53_PAD_CSI0_DAT9__I2C1_SCL */
>;
};
};
i2c2 {
pinctrl_i2c2_1: i2c2grp-1 {
fsl,pins = <
61 0xc0000000 /* MX53_PAD_KEY_ROW3__I2C2_SDA */
53 0xc0000000 /* MX53_PAD_KEY_COL3__I2C2_SCL */
>;
};
};
i2c3 {
pinctrl_i2c3_1: i2c3grp-1 {
fsl,pins = <
1102 0xc0000000 /* MX53_PAD_GPIO_6__I2C3_SDA */
1130 0xc0000000 /* MX53_PAD_GPIO_5__I2C3_SCL */
>;
};
};
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
346 0x1c5 /* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */
354 0x1c5 /* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */
>;
};
pinctrl_uart1_2: uart1grp-2 {
fsl,pins = <
828 0x1c5 /* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */
832 0x1c5 /* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */
>;
};
};
uart2 {
pinctrl_uart2_1: uart2grp-1 {
fsl,pins = <
841 0x1c5 /* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */
836 0x1c5 /* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */
>;
};
};
uart3 {
pinctrl_uart3_1: uart3grp-1 {
fsl,pins = <
884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */
888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */
875 0x1c5 /* MX53_PAD_PATA_DA_1__UART3_CTS */
880 0x1c5 /* MX53_PAD_PATA_DA_2__UART3_RTS */
>;
};
};
uart4 {
pinctrl_uart4_1: uart4grp-1 {
fsl,pins = <
11 0x1c5 /* MX53_PAD_KEY_COL0__UART4_TXD_MUX */
18 0x1c5 /* MX53_PAD_KEY_ROW0__UART4_RXD_MUX */
>;
};
};
uart5 {
pinctrl_uart5_1: uart5grp-1 {
fsl,pins = <
24 0x1c5 /* MX53_PAD_KEY_COL1__UART5_TXD_MUX */
31 0x1c5 /* MX53_PAD_KEY_ROW1__UART5_RXD_MUX */
>;
};
};
};
pwm1: pwm@53fb4000 {
#pwm-cells = <2>;
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb4000 0x4000>;
clocks = <&clks 37>, <&clks 38>;
clock-names = "ipg", "per";
interrupts = <61>;
};
pwm2: pwm@53fb8000 {
#pwm-cells = <2>;
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb8000 0x4000>;
clocks = <&clks 39>, <&clks 40>;
clock-names = "ipg", "per";
interrupts = <94>;
};
uart1: serial@53fbc000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
clocks = <&clks 28>, <&clks 29>;
clock-names = "ipg", "per";
status = "disabled";
};
uart2: serial@53fc0000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
clocks = <&clks 30>, <&clks 31>;
clock-names = "ipg", "per";
status = "disabled";
};
can1: can@53fc8000 {
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fc8000 0x4000>;
interrupts = <82>;
clocks = <&clks 158>, <&clks 157>;
clock-names = "ipg", "per";
status = "disabled";
};
can2: can@53fcc000 {
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fcc000 0x4000>;
interrupts = <83>;
clocks = <&clks 87>, <&clks 86>;
clock-names = "ipg", "per";
status = "disabled";
};
clks: ccm@53fd4000{
compatible = "fsl,imx53-ccm";
reg = <0x53fd4000 0x4000>;
interrupts = <0 71 0x04 0 72 0x04>;
#clock-cells = <1>;
};
gpio5: gpio@53fdc000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53fdc000 0x4000>;
interrupts = <103 104>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio6: gpio@53fe0000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53fe0000 0x4000>;
interrupts = <105 106>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio7: gpio@53fe4000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53fe4000 0x4000>;
interrupts = <107 108>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
i2c3: i2c@53fec000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x53fec000 0x4000>;
interrupts = <64>;
clocks = <&clks 88>;
status = "disabled";
};
uart4: serial@53ff0000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
clocks = <&clks 65>, <&clks 66>;
clock-names = "ipg", "per";
status = "disabled";
};
};
aips@60000000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x60000000 0x10000000>;
ranges;
uart5: serial@63f90000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
interrupts = <86>;
clocks = <&clks 67>, <&clks 68>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi2: ecspi@63fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x63fac000 0x4000>;
interrupts = <37>;
clocks = <&clks 53>, <&clks 54>;
clock-names = "ipg", "per";
status = "disabled";
};
sdma: sdma@63fb0000 {
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
clocks = <&clks 56>, <&clks 56>;
clock-names = "ipg", "ahb";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
};
cspi: cspi@63fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
clocks = <&clks 55>, <&clks 0>;
clock-names = "ipg", "per";
status = "disabled";
};
i2c2: i2c@63fc4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc4000 0x4000>;
interrupts = <63>;
clocks = <&clks 35>;
status = "disabled";
};
i2c1: i2c@63fc8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc8000 0x4000>;
interrupts = <62>;
clocks = <&clks 34>;
status = "disabled";
};
ssi1: ssi@63fcc000 {
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
clocks = <&clks 48>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
audmux: audmux@63fd0000 {
compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
reg = <0x63fd0000 0x4000>;
status = "disabled";
};
nfc: nand@63fdb000 {
compatible = "fsl,imx53-nand";
reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
interrupts = <8>;
clocks = <&clks 60>;
status = "disabled";
};
ssi3: ssi@63fe8000 {
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fe8000 0x4000>;
interrupts = <96>;
clocks = <&clks 50>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
fec: ethernet@63fec000 {
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
reg = <0x63fec000 0x4000>;
interrupts = <87>;
clocks = <&clks 42>, <&clks 42>, <&clks 42>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
};
};
};