if ARCH_BERLIN

menu "Marvell Berlin SoCs Support"

choice
	prompt "Select Berlin SoC family for target system"

config ARCH_BERLIN2
	bool "BG2"
	select ARCH_REQUIRE_GPIOLIB
	select USB_ARCH_HAS_EHCI if USB_SUPPORT
	help
	  Support for Marvell Berlin Generation 2 SoCs, based on the
	  ARM CortexA9 CPU and the ARM PL310 L2 cache controller
endchoice

choice
	prompt "Choose SoCs"
	default BERLIN2CDP
	depends on ARCH_BERLIN2
	help
	  This option allows to select a SoC version.

config BERLIN2CD
	bool "BG2 CD"
	select ARM_ERRATA_754322
	select ARM_ERRATA_775420
	help
	  BG2 CD version

config BERLIN2Q
	bool "BG2 Q"
	select ARM_ERRATA_754322
	select ARM_ERRATA_764369 if SMP
	help
	  BG2 Q version

config BERLIN2CDP
	bool "BG2 CDp Common"
	help
	  BG2 CD+ version
endchoice


menu "BERLIN2 features"

config  BERLIN_ASIC
	bool "Support ASIC Version"
	default y
	help
	  Berlin has FPGA and ASIC version. Say Y to support ASIC version.
endmenu

comment "BERLIN modules"

config BERLIN_SHM
	tristate "Support Shared Memory(SHM)"
	default y
	help
	  This module implements the shared memory access.

config BERLIN_CC
	tristate "Support Common Communication(CC)"
	default y
	help
	  This module implements the interprocess communication scheme
	  for Marvell Berlin SoCs

config BERLIN_GPIO
	tristate "Support GPIO port operations from user space"
	default n
	help
	  Enable support for GPIO control from user space

config BERLIN_I2C
	tristate "Support I2C bus"
	default y
	help
	  Enable support fo I2C bus in Berlin SoC

config BERLIN_GPU
    tristate "SoC's 2d GPU support"
    default m
    help
      2D GPU support

config BERLIN_GPU3D
    tristate "SoC's 3d GPU support"
    default m
    help
      3D GPU support

config BERLIN_PE
    tristate "Support Presentation Engine"
    default m
    help
      Enable support for Presentation Engine

config BERLIN_AMP
    tristate "Support AMP"
    default m
    help
      Enable support for AMP

config BERLIN_TZDD
    tristate "Support TrustZone"
    select BERLIN_TZDD_CB
    default m
    help
      Enable support for ARM TrustZone

config BERLIN_TZDD_CB
    tristate "Support TrustZone Callback"
	depends on BERLIN_TZDD
    default m
    help
      Enable support for TrustZone event callback

config BERLIN_PXA3XX_NFC
	tristate "Support NAND Flash Controller (fork of pxa3xx_nand)"
	default n
	help
	  A fork of mainline pxa3xx_nand.c. This NFC has no dedicated interrupt, but SoC
	  contains a powerfull pbridge DMA engine whose interrupt can be enabled/disabled.
	  So the driver could work in 3 modes: nonDMA, polling-DMA, interrupt-DMA.

config BERLIN_NAND_RANDOMIZER
	bool "Support software NAND randomizer"
	default n
	depends on BERLIN_PXA3XX_NFC
	help
	  To improve data stability for some large-capacity MLC(multipil-level cell) chips,
	  data have to be randomized before storing into, or
	  derandomized after reading out, from the physical cells.
	  For chips that don't build in HW randomizer, SW randomizer is needed.
	  Say Y here if you have no idea

config BERLIN_NAND_READ_RETRY
	bool "Support NAND read retry when ecc fail in read operation"
	default y
	depends on BERLIN_PXA3XX_NFC
	help
	  To improve nand read ability of error correction. When ecc fail in read operation,
	  change the read cmd parameter of nand chip. Every kind of Nand chip's READ RETRY feature
	  diff from each other. If nand chip do not support READ RETRY, this feature will do nothing.
	  Now support only hynix nand chip read retry.

config BERLIN_SDIO_WLAN_8787
	tristate "SDIO Wlan (IEEE802.11 A|B|G|N) driver for wlan8787 module"
	default n
	depends on MMC_SDHCI_MV
	select WIRELESS_EXT
	select WEXT_PRIV
	select WEXT_SPY
	help
	  This is the wifi module for Berlin. Please try build it for module only.
config BERLIN_SDIO_WLAN_8797
	tristate "SDIO Wlan (IEEE802.11 A|B|G|N) driver for wlan8797 module"
	default n
	depends on MMC_SDHCI_MV
	select WIRELESS_EXT
	select WEXT_PRIV
	select WEXT_SPY
	help
	  This is the wifi module for Berlin. Please try build it for module only.

config BERLIN_SDIO_WLAN_8801
	tristate "SDIO Wlan (IEEE802.11 A|B|G|N) driver for wlan8801 module"
	default n
	depends on MMC_SDHCI_MV
	select WIRELESS_EXT
	select WEXT_PRIV
	select WEXT_SPY
	help
	  This is the wifi module for Berlin. Please try build it for module only.

config BERLIN_SDIO_WLAN_8887
	tristate "SDIO Wlan (IEEE802.11 A|B|G|N) driver for wlan8887 module"
	default n
	depends on MMC_SDHCI_MV
	select WIRELESS_EXT
	select WEXT_PRIV
	select WEXT_SPY
	help
	  This is the wifi module for Berlin. Please try build it for module only.

config BERLIN_SDIO_BT_8887
        tristate "SDIO Bluetooth/BLE support for Marvell's 8887 SoC"
        default m
	depends on CONFIG_BT
	depends on CONFIG_BT_RFCOMM
	depends on CONFIG_BT_RFCOMM_TTY
	depends on CONFIG_BT_BNEP
	depends on CONFIG_BT_BNEP_MC_FILTER
	depends on CONFIG_BT_BNEP_PROTO_FILTER
	depends on CONFIG_BT_HIDP
	depends on CONFIG_BT_MRVL
	depends on CONFIG_HID
	depends on CONFIG_HIDRAW
	depends on CONFIG_UHID
	depends on CONFIG_HID_GENERIC
        help
          This is defualt bluetooth module for Berlin based platform.

config BERLIN_SDIO_BT_8887_CHAR_DRV
        tristate "SDIO Bluetooth/BLE Bluedroid support for Marvell's 8887 SoC"
        default m
	depends on !CONFIG_BT
	depends on !CONFIG_BT_RFCOMM
	depends on !CONFIG_BT_RFCOMM_TTY
	depends on !CONFIG_BT_BNEP
	depends on !CONFIG_BT_BNEP_MC_FILTER
	depends on !CONFIG_BT_BNEP_PROTO_FILTER
	depends on !CONFIG_BT_HIDP
	depends on !CONFIG_BT_MRVL
        help
          This is defualt bluetooth module for Berlin based platform using Bluedroid stack.

config BERLIN_FASTLOGO
	tristate "Support fast logo"
	default n
	help
	  Enable support for fast logo

config BERLIN_PWM
	bool "Support PWM"
	default y
	help
	  Enable support for PWM
endmenu

endif