qca-nss-ecm/frontends/cmn/ecm_ipv6.c

/*
 **************************************************************************
 * Copyright (c) 2014-2021 The Linux Foundation. All rights reserved.
 * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
 * Permission to use, copy, modify, and/or distribute this software for
 * any purpose with or without fee is hereby granted, provided that the
 * above copyright notice and this permission notice appear in all copies.
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
 * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 **************************************************************************
 */

#include <linux/version.h>
#include <linux/types.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/module.h>
#include <linux/skbuff.h>
#include <linux/icmp.h>
#include <linux/debugfs.h>
#include <linux/kthread.h>
#include <linux/pkt_sched.h>
#include <linux/string.h>
#include <net/ip_tunnels.h>
#include <net/ip6_route.h>
#include <net/ip6_fib.h>
#include <net/addrconf.h>
#include <net/ipv6.h>
#include <net/tcp.h>
#include <asm/unaligned.h>
#include <asm/uaccess.h>	/* for put_user */
#include <net/ipv6.h>
#include <net/xfrm.h>
#include <linux/inet.h>
#include <linux/in6.h>
#include <linux/udp.h>
#include <linux/tcp.h>
#include <linux/ppp_defs.h>
#include <linux/mroute6.h>
#include <linux/vmalloc.h>

#include <net/ip6_tunnel.h>
#include <linux/inetdevice.h>
#include <linux/if_arp.h>
#include <linux/netfilter_ipv6.h>
#include <linux/netfilter_bridge.h>
#include <linux/if_bridge.h>
#include <net/arp.h>
#ifdef ECM_INTERFACE_VXLAN_ENABLE
#include <net/vxlan.h>
#endif
#include <net/netfilter/nf_conntrack.h>
#include <net/netfilter/nf_conntrack_acct.h>
#include <net/netfilter/nf_conntrack_helper.h>
#include <net/netfilter/nf_conntrack_l4proto.h>
#include <linux/netfilter/nf_conntrack_zones_common.h>
#include <net/netfilter/nf_conntrack_core.h>
#include <net/netfilter/nf_conntrack_timeout.h>
#include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
#include <net/netfilter/ipv6/nf_defrag_ipv6.h>
#ifdef ECM_INTERFACE_VLAN_ENABLE
#include <linux/../../net/8021q/vlan.h>
#include <linux/if_vlan.h>
#endif

/*
 * Debug output levels
 * 0 = OFF
 * 1 = ASSERTS / ERRORS
 * 2 = 1 + WARN
 * 3 = 2 + INFO
 * 4 = 3 + TRACE
 */
#define DEBUG_LEVEL ECM_NSS_IPV6_DEBUG_LEVEL

#ifdef ECM_MULTICAST_ENABLE
#include <mc_ecm.h>
#endif

#include "ecm_types.h"
#include "ecm_db_types.h"
#include "ecm_state.h"
#include "ecm_tracker.h"
#include "ecm_classifier.h"
#include "ecm_front_end_types.h"
#include "ecm_tracker_datagram.h"
#include "ecm_tracker_udp.h"
#include "ecm_tracker_tcp.h"
#include "ecm_db.h"
#ifdef ECM_CLASSIFIER_NL_ENABLE
#include "ecm_classifier_nl.h"
#endif
#include "ecm_interface.h"
#include "ecm_front_end_common.h"
#include "ecm_front_end_ipv6.h"
#ifdef ECM_INTERFACE_OVS_BRIDGE_ENABLE
#include <ovsmgr.h>
#endif
#include "ecm_ported_ipv6.h"
#include "ecm_non_ported_ipv6.h"
#include "ecm_multicast_ipv6.h"

/*
 * Locking of the classifier - concurrency control for file global parameters.
 * NOTE: It is safe to take this lock WHILE HOLDING a feci->lock.  The reverse is NOT SAFE.
 */
DEFINE_SPINLOCK(ecm_ipv6_lock);			/* Protect against SMP access between netfilter, events and private threaded function. */

/*
 * Management thread control
 */
bool ecm_ipv6_terminate_pending = false;		/* True when the user has signalled we should quit */

/*
 * ecm_ipv6_node_establish_and_ref()
 *	Returns a reference to a node, possibly creating one if necessary.
 *
 * The given_node_addr will be used if provided.
 *
 * Returns NULL on failure.
 */
struct ecm_db_node_instance *ecm_ipv6_node_establish_and_ref(struct ecm_front_end_connection_instance *feci,
							struct net_device *dev, ip_addr_t addr,
							struct ecm_db_iface_instance *interface_list[], int32_t interface_list_first,
							uint8_t *given_node_addr, struct sk_buff *skb)
{
	struct ecm_db_node_instance *ni;
	struct ecm_db_node_instance *nni;
	struct ecm_db_iface_instance *ii;
	int i;
	bool done;
	uint8_t node_addr[ETH_ALEN];

#if defined(ECM_INTERFACE_L2TPV2_ENABLE) || defined(ECM_INTERFACE_PPTP_ENABLE)
	ip_addr_t remote_ip, local_ip;
#endif

#if defined(ECM_INTERFACE_VXLAN_ENABLE) || defined(ECM_INTERFACE_L2TPV2_ENABLE) || defined(ECM_INTERFACE_PPTP_ENABLE)
	struct net_device *local_dev;
#endif

#ifdef ECM_INTERFACE_MAP_T_ENABLE
	struct inet6_dev *ip6_inetdev;
#endif

#ifdef ECM_INTERFACE_OVPN_ENABLE
	struct net_device *out_dev;
#endif

#if defined(ECM_INTERFACE_GRE_TUN_ENABLE) || defined(ECM_XFRM_ENABLE)
	struct net_device *in;
#endif

#ifdef ECM_INTERFACE_GRE_TUN_ENABLE
	struct ip_tunnel *gre4_tunnel;
	struct ip6_tnl *gre6_tunnel;
	ip_addr_t local_gre_tun_ip;
#endif

#if defined(ECM_INTERFACE_L2TPV2_ENABLE) || defined(ECM_INTERFACE_MAP_T_ENABLE)
#ifdef ECM_INTERFACE_PPPOE_ENABLE
	struct ppp_channel *ppp_chan[1];
	struct pppoe_opt addressing;
	int px_proto;
#endif
#endif

	DEBUG_INFO("%px: Establish node for " ECM_IP_ADDR_OCTAL_FMT "\n", feci, ECM_IP_ADDR_TO_OCTAL(addr));

	/*
	 * The node is the datalink address, typically a MAC address.
	 * However the node address to use is not always obvious and depends on the interfaces involved.
	 * For example if the interface is PPPoE then we use the MAC of the PPPoE server as we cannot use normal ARP resolution.
	 * Not all hosts have a node address, where there is none, a suitable alternative should be located and is typically based on 'addr'
	 * or some other datalink session information.
	 * It should be, at a minimum, something that ties the host with the interface.
	 *
	 * Iterate from 'inner' to 'outer' interfaces - discover what the node is.
	 */
	memset(node_addr, 0, ETH_ALEN);
	done = false;
	if (given_node_addr) {
		memcpy(node_addr, given_node_addr, ETH_ALEN);
		done = true;
		DEBUG_TRACE("%px: Using given node address: %pM\n", feci, node_addr);
	}
	for (i = ECM_DB_IFACE_HEIRARCHY_MAX - 1; (!done) && (i >= interface_list_first); i--) {
		ecm_db_iface_type_t type;
#ifdef ECM_INTERFACE_PPPOE_ENABLE
		struct ecm_db_interface_info_pppoe pppoe_info;
#endif
#ifdef ECM_INTERFACE_L2TPV2_ENABLE
		struct ecm_db_interface_info_pppol2tpv2 pppol2tpv2_info;
#endif
#ifdef ECM_INTERFACE_PPTP_ENABLE
		struct ecm_db_interface_info_pptp pptp_info;
#endif
		type = ecm_db_iface_type_get(interface_list[i]);
		DEBUG_INFO("%px: Lookup node address, interface @ %d is type: %d\n", feci, i, type);

		switch (type) {

		case ECM_DB_IFACE_TYPE_PPPOE:
#ifdef ECM_INTERFACE_PPPOE_ENABLE
			/*
			 * Node address is the address of the remote PPPoE server
			 */
			ecm_db_iface_pppoe_session_info_get(interface_list[i], &pppoe_info);
			memcpy(node_addr, pppoe_info.remote_mac, ETH_ALEN);
			done = true;
			break;
#else
			DEBUG_TRACE("%px: PPPoE interface unsupported\n", feci);
			return NULL;
#endif

		case ECM_DB_IFACE_TYPE_SIT:
		case ECM_DB_IFACE_TYPE_TUNIPIP6:
			done = true;
			break;

		case ECM_DB_IFACE_TYPE_PPPOL2TPV2:
#ifdef ECM_INTERFACE_L2TPV2_ENABLE
			ecm_db_iface_pppol2tpv2_session_info_get(interface_list[i], &pppol2tpv2_info);
			ECM_HIN4_ADDR_TO_IP_ADDR(local_ip, pppol2tpv2_info.ip.saddr);
			ECM_HIN4_ADDR_TO_IP_ADDR(remote_ip, pppol2tpv2_info.ip.daddr);

			DEBUG_TRACE("%px: local=" ECM_IP_ADDR_OCTAL_FMT " remote=" ECM_IP_ADDR_OCTAL_FMT " addr=" ECM_IP_ADDR_OCTAL_FMT "\n", feci,
			       ECM_IP_ADDR_TO_OCTAL(local_ip), ECM_IP_ADDR_TO_OCTAL(remote_ip), ECM_IP_ADDR_TO_OCTAL(addr));

			local_dev = ecm_interface_dev_find_by_local_addr(local_ip);

			if (!local_dev) {
				DEBUG_WARN("%px: Failed to find local netdevice of l2tp tunnel for " ECM_IP_ADDR_OCTAL_FMT "\n", feci, ECM_IP_ADDR_TO_OCTAL(local_ip));
				return NULL;
			}

			DEBUG_TRACE("%px: local_dev found is %s\n", feci, local_dev->name);

			if (local_dev->type == ARPHRD_PPP) {
#ifndef ECM_INTERFACE_PPPOE_ENABLE
				DEBUG_TRACE("%px: l2tpv2 over pppoe unsupported\n", feci);
				dev_put(local_dev);
				return NULL;
#else
				if (ppp_hold_channels(local_dev, ppp_chan, 1) != 1) {
					DEBUG_WARN("%px: l2tpv2 over netdevice %s unsupported; could not hold ppp channels\n", feci, local_dev->name);
					dev_put(local_dev);
					return NULL;
				}

				px_proto = ppp_channel_get_protocol(ppp_chan[0]);
				if (px_proto != PX_PROTO_OE) {
					DEBUG_WARN("%px: l2tpv2 over PPP protocol %d unsupported\n", feci, px_proto);
					ppp_release_channels(ppp_chan, 1);
					dev_put(local_dev);
					return NULL;
				}

				if (pppoe_channel_addressing_get(ppp_chan[0], &addressing)) {
					DEBUG_WARN("%px: failed to get PPPoE addressing info\n", feci);
					ppp_release_channels(ppp_chan, 1);
					dev_put(local_dev);
					return NULL;
				}

				DEBUG_TRACE("%px: Obtained mac address for %s remote address " ECM_IP_ADDR_OCTAL_FMT "\n", feci, addressing.dev->name, ECM_IP_ADDR_TO_OCTAL(addr));
				memcpy(node_addr, addressing.dev->dev_addr, ETH_ALEN);
				dev_put(addressing.dev);
				ppp_release_channels(ppp_chan, 1);
				dev_put(local_dev);
				done = true;
				break;
#endif
			}

			if (unlikely(!ecm_interface_mac_addr_get_no_route(local_dev, remote_ip, node_addr))) {
				DEBUG_WARN("%px: Failed to obtain mac for host " ECM_IP_ADDR_OCTAL_FMT "\n", feci, ECM_IP_ADDR_TO_OCTAL(addr));
				dev_put(local_dev);
				return NULL;
			}

			dev_put(local_dev);
			done = true;
			break;
#else
			DEBUG_TRACE("%px: PPPoL2TPV2 interface unsupported\n", feci);
			return NULL;
#endif
		case ECM_DB_IFACE_TYPE_PPTP:
#ifdef ECM_INTERFACE_PPTP_ENABLE
			ecm_db_iface_pptp_session_info_get(interface_list[i], &pptp_info);
			ECM_HIN4_ADDR_TO_IP_ADDR(local_ip, pptp_info.src_ip);
			ECM_HIN4_ADDR_TO_IP_ADDR(remote_ip, pptp_info.dst_ip);
			DEBUG_TRACE("%px: local=" ECM_IP_ADDR_DOT_FMT " remote=" ECM_IP_ADDR_DOT_FMT " addr=" ECM_IP_ADDR_DOT_FMT "\n", feci,
			       ECM_IP_ADDR_TO_DOT(local_ip), ECM_IP_ADDR_TO_DOT(remote_ip), ECM_IP_ADDR_TO_DOT(addr));

			local_dev = ecm_interface_dev_find_by_local_addr(local_ip);

			if (!local_dev) {
				DEBUG_WARN("%px: Failed to find local netdevice of pptp tunnel for " ECM_IP_ADDR_DOT_FMT "\n", feci, ECM_IP_ADDR_TO_DOT(local_ip));
				return NULL;
			}

			DEBUG_TRACE("%px: local_dev found is %s\n", feci, local_dev->name);

			if (ECM_IP_ADDR_MATCH(local_ip, addr)) {
				if (unlikely(!ecm_interface_mac_addr_get_no_route(local_dev, local_ip, node_addr))) {
					DEBUG_WARN("%px: failed to obtain node address for " ECM_IP_ADDR_DOT_FMT "\n", feci, ECM_IP_ADDR_TO_DOT(local_ip));
					dev_put(local_dev);
					return NULL;
				}

			} else {
				if (unlikely(!ecm_interface_mac_addr_get_no_route(local_dev, remote_ip, node_addr))) {
					ip_addr_t gw_addr = ECM_IP_ADDR_NULL;

					if (!ecm_interface_find_gateway(remote_ip, gw_addr)) {
						DEBUG_WARN("%px: failed to obtain Gateway address for host " ECM_IP_ADDR_DOT_FMT "\n", feci, ECM_IP_ADDR_TO_DOT(remote_ip));
						dev_put(local_dev);
						return NULL;
					}

					if (ECM_IP_ADDR_MATCH(gw_addr, remote_ip)) {
						DEBUG_TRACE("%px: host ip address match with gw address " ECM_IP_ADDR_DOT_FMT "\n", feci, ECM_IP_ADDR_TO_DOT(remote_ip));
						dev_put(local_dev);
						return NULL;
					}

					if (!ecm_interface_mac_addr_get_no_route(local_dev, gw_addr, node_addr)) {
						DEBUG_WARN("%px: failed to obtain node address for host " ECM_IP_ADDR_DOT_FMT "\n", feci, ECM_IP_ADDR_TO_DOT(gw_addr));
						dev_put(local_dev);
						return NULL;
					}
				}
			}

			dev_put(local_dev);
			done = true;
			break;
#else
			DEBUG_TRACE("%px: PPTP interface unsupported\n", feci);
			return NULL;
#endif
		case ECM_DB_IFACE_TYPE_MAP_T:
#ifdef ECM_INTERFACE_MAP_T_ENABLE
			ip6_inetdev = ip6_dst_idev(skb_dst(skb));
			if (!ip6_inetdev) {
				DEBUG_WARN("%px: Failed to obtain mac address for MAP-T address " ECM_IP_ADDR_OCTAL_FMT "\n", feci, ECM_IP_ADDR_TO_OCTAL(addr));
				return NULL;
			}

			if (ip6_inetdev->dev->type != ARPHRD_PPP) {
				DEBUG_TRACE("%px: obtained mac address for %s MAP-T address " ECM_IP_ADDR_OCTAL_FMT "\n", feci, ip6_inetdev->dev->name, ECM_IP_ADDR_TO_OCTAL(addr));
				memcpy(node_addr, ip6_inetdev->dev->dev_addr, ETH_ALEN);
				done = true;
				break;
			}

#ifndef ECM_INTERFACE_PPPOE_ENABLE
			DEBUG_TRACE("%px: MAP-T over netdevice %s unsupported\n", feci, ip6_inetdev->dev->name);
			return NULL;
#else
			if (ppp_hold_channels(ip6_inetdev->dev, ppp_chan, 1) != 1) {
				DEBUG_WARN("%px: MAP-T over netdevice %s unsupported; could not hold ppp channels\n", feci, ip6_inetdev->dev->name);
				return NULL;
			}

			px_proto = ppp_channel_get_protocol(ppp_chan[0]);
			if (px_proto != PX_PROTO_OE) {
				DEBUG_WARN("%px: MAP-T over PPP protocol %d unsupported\n", feci, px_proto);
				ppp_release_channels(ppp_chan, 1);
				return NULL;
			}

			if (pppoe_channel_addressing_get(ppp_chan[0], &addressing)) {
				DEBUG_WARN("%px: failed to get PPPoE addressing info\n", feci);
				ppp_release_channels(ppp_chan, 1);
				return NULL;
			}

			DEBUG_TRACE("%px: Obtained mac address for %s MAP-T address " ECM_IP_ADDR_OCTAL_FMT "\n", feci, addressing.dev->name, ECM_IP_ADDR_TO_OCTAL(addr));
			memcpy(node_addr, addressing.dev->dev_addr, ETH_ALEN);
			dev_put(addressing.dev);
			ppp_release_channels(ppp_chan, 1);
			done = true;
			break;
#endif

#else
			DEBUG_TRACE("%px: MAP-T interface unsupported\n", feci);
			return NULL;
#endif

		case ECM_DB_IFACE_TYPE_GRE_TUN:
#ifdef ECM_INTERFACE_GRE_TUN_ENABLE
			in = dev_get_by_index(&init_net, skb->skb_iif);
			if (!in) {
				DEBUG_WARN("%px: failed to obtain node address for host " ECM_IP_ADDR_DOT_FMT "\n", feci, ECM_IP_ADDR_TO_DOT(addr));
				return NULL;
			}

			switch(in->type) {
			case ARPHRD_IPGRE:
				gre4_tunnel = netdev_priv(in);
				if (!gre4_tunnel) {
					dev_put(in);
					DEBUG_WARN("%px: failed to obtain node address for host. GREv4 tunnel not initialized\n", feci);
					return NULL;
				}
				ECM_NIN4_ADDR_TO_IP_ADDR(local_gre_tun_ip, gre4_tunnel->parms.iph.saddr);
				dev_put(in);
				in = ecm_interface_dev_find_by_local_addr(local_gre_tun_ip);
				if (!in) {
					DEBUG_WARN("%px: failed to obtain node address for host " ECM_IP_ADDR_DOT_FMT "\n", feci, ECM_IP_ADDR_TO_DOT(local_gre_tun_ip));
					return NULL;
				}
				break;

			case ARPHRD_IP6GRE:
				gre6_tunnel = netdev_priv(in);
				if (!gre6_tunnel) {
					dev_put(in);
					DEBUG_WARN("%px: failed to obtain node address for host. GREv4 tunnel not initialized\n", feci);
					return NULL;
				}
				ECM_NIN6_ADDR_TO_IP_ADDR(local_gre_tun_ip, gre6_tunnel->parms.laddr);
				dev_put(in);
				in = ecm_interface_dev_find_by_local_addr(local_gre_tun_ip);
				if (!in) {
					DEBUG_WARN("%px: failed to obtain node address for host " ECM_IP_ADDR_OCTAL_FMT "\n", feci, ECM_IP_ADDR_TO_OCTAL(local_gre_tun_ip));
					return NULL;
				}
				break;

			default:
				DEBUG_TRACE("%px: establish node with physical netdev: %s\n", feci, in->name);
			}
			memcpy(node_addr, in->dev_addr, ETH_ALEN);
			dev_put(in);
			done = true;
			break;
#else
			DEBUG_TRACE("%px: GRE interface unsupported\n", feci);
			return NULL;
#endif

		case ECM_DB_IFACE_TYPE_VLAN:
#ifdef ECM_INTERFACE_VLAN_ENABLE
			/*
			 * VLAN handled same along with bridge etc.
			 */
#else
			DEBUG_TRACE("%px: VLAN interface unsupported\n", feci);
			return NULL;
#endif
		case ECM_DB_IFACE_TYPE_IPSEC_TUNNEL:
#ifdef ECM_XFRM_ENABLE
			if (dst_xfrm(skb_dst(skb))) {
				ether_addr_copy(node_addr, dev->dev_addr);
				done = true;
				break;
			}

			if (secpath_exists(skb)) {
				in = dev_get_by_index(&init_net, skb->skb_iif);
				if (!in) {
					DEBUG_WARN("%px: failed to obtain node address for host " ECM_IP_ADDR_OCTAL_FMT "\n", feci, ECM_IP_ADDR_TO_OCTAL(addr));
					return NULL;
				}

				ether_addr_copy(node_addr, in->dev_addr);
				dev_put(in);
				done = true;
				break;
			}
#if __has_attribute(__fallthrough__)
			__attribute__((__fallthrough__));
#endif
#endif
		case ECM_DB_IFACE_TYPE_ETHERNET:
		case ECM_DB_IFACE_TYPE_LAG:
		case ECM_DB_IFACE_TYPE_BRIDGE:
#ifdef ECM_INTERFACE_OVS_BRIDGE_ENABLE
		case ECM_DB_IFACE_TYPE_OVS_BRIDGE:
#endif
			if (!ecm_interface_mac_addr_get_no_route(dev, addr, node_addr)) {
				ip_addr_t gw_addr = ECM_IP_ADDR_NULL;

				/*
				 * Try one more time with gateway ip address if it exists.
				 */
				if (!ecm_interface_find_gateway(addr, gw_addr)) {
					DEBUG_WARN("%px: Node establish failed, there is no gateway address for 2nd mac lookup try\n", feci);
					return NULL;
				}

				/*
				 * The found gateway address can be all zeros,
				 * so in this case use the host address.
				 */
				if (ECM_IP_ADDR_IS_NULL(gw_addr)) {
					DEBUG_TRACE("%px: GW address is found as zeros, so use host IP\n", feci);
					ECM_IP_ADDR_COPY(gw_addr, addr);
				} else {
					DEBUG_TRACE("%px: Have a gw address " ECM_IP_ADDR_OCTAL_FMT "\n", feci, ECM_IP_ADDR_TO_OCTAL(gw_addr));
				}

				if (ecm_interface_mac_addr_get_no_route(dev, gw_addr, node_addr)) {
					DEBUG_TRACE("%px: Found the mac address for gateway\n", feci);
					goto done;
				}

				if (ecm_front_end_is_bridge_port(dev)) {
					struct net_device *master;
					master = ecm_interface_get_and_hold_dev_master(dev);
					DEBUG_ASSERT(master, "%px: Expected a master\n", feci);
					ecm_interface_send_neighbour_solicitation(master, gw_addr);
					dev_put(master);
				} else {
					ecm_interface_send_neighbour_solicitation(dev, gw_addr);
				}

				DEBUG_WARN("%px: Failed to obtain mac for host " ECM_IP_ADDR_OCTAL_FMT " gw: " ECM_IP_ADDR_OCTAL_FMT "\n", feci,
					    ECM_IP_ADDR_TO_OCTAL(addr), ECM_IP_ADDR_TO_OCTAL(gw_addr));
				return NULL;
			}
done:
			if (is_multicast_ether_addr(node_addr)) {
				DEBUG_TRACE("%px: multicast node address for host " ECM_IP_ADDR_OCTAL_FMT ", node_addr: %pM\n", feci, ECM_IP_ADDR_TO_OCTAL(addr), node_addr);
				return NULL;
			}

			done = true;
			break;
		case ECM_DB_IFACE_TYPE_RAWIP:
#ifdef ECM_INTERFACE_RAWIP_ENABLE
			done = true;
			break;
#else
			DEBUG_TRACE("%px: RAWIP interface unsupported\n", feci);
			return NULL;
#endif
		case ECM_DB_IFACE_TYPE_OVPN:
#ifdef ECM_INTERFACE_OVPN_ENABLE
			out_dev = skb_dst(skb)->dev;

			/*
			 * There is no MAC address for TUN/TAP device.
			 * Return if skb->dst is TUN/TAP device.
			 */
			if (!out_dev || out_dev->priv_flags_ext & IFF_EXT_TUN_TAP) {
				DEBUG_WARN("%px: failed to update node_addr dev = %s, out_dev = %s, node address for host " ECM_IP_ADDR_OCTAL_FMT "\n", feci,
						dev->name, out_dev->name, ECM_IP_ADDR_TO_OCTAL(addr));
				return NULL;
			}
			memcpy(node_addr, out_dev->dev_addr, ETH_ALEN);

			DEBUG_TRACE("%px: dev = %s, out_dev = %s, node address for host " ECM_IP_ADDR_OCTAL_FMT ", node_addr: %pM\n", feci,
				dev->name, out_dev->name, ECM_IP_ADDR_TO_OCTAL(addr), node_addr);
			done = true;
			break;
#else
			DEBUG_TRACE("%px: OVPN interface unsupported\n", feci);
			return NULL;
#endif
		case ECM_DB_IFACE_TYPE_VXLAN:
#ifdef ECM_INTERFACE_VXLAN_ENABLE
			local_dev = ecm_interface_dev_find_by_local_addr(addr);
			if (!local_dev) {
				DEBUG_WARN("%px: Failed to find local netdevice of VxLAN tunnel for " ECM_IP_ADDR_OCTAL_FMT "\n",
						feci, ECM_IP_ADDR_TO_OCTAL(addr));
				return NULL;
			}

			if (!ecm_interface_mac_addr_get_no_route(local_dev, addr, node_addr)) {
				DEBUG_WARN("%px: Couldn't find mac address for local dev\n", feci);
				dev_put(local_dev);
				return NULL;
			}
			DEBUG_TRACE("%px: Found the mac address for local dev\n", feci);
			dev_put(local_dev);
			done = true;
			break;
#else
			DEBUG_TRACE("%px: VXLAN interface unsupported\n", feci);
			return NULL;
#endif
		default:
			/*
			 * Don't know how to handle these.
			 * Just copy some part of the address for now, but keep iterating the interface list
			 * in the hope something recognisable will be seen!
			 * GGG TODO We really need to roll out support for all interface types we can deal with ASAP :-(
			 */
			memcpy(node_addr, (uint8_t *)addr, ETH_ALEN);
		}
	}
	if (!done) {
		DEBUG_WARN("%px: Failed to establish node for " ECM_IP_ADDR_OCTAL_FMT "\n", feci, ECM_IP_ADDR_TO_OCTAL(addr));
		return NULL;
	}

	/*
	 * Establish iface
	 */
	ii = ecm_interface_establish_and_ref(feci, dev, skb);
	if (!ii) {
		DEBUG_WARN("%px: Failed to establish iface\n", feci);
		return NULL;
	}

	/*
	 * Locate the node
	 */
	ni = ecm_db_node_find_and_ref(node_addr, ii);
	if (ni) {
		DEBUG_TRACE("%px: node established %px\n", feci, ni);
		ecm_db_iface_deref(ii);
		return ni;
	}

	/*
	 * No node - create one
	 */
	nni = ecm_db_node_alloc();
	if (!nni) {
		DEBUG_WARN("%px: Failed to establish node\n", feci);
		ecm_db_iface_deref(ii);
		return NULL;
	}

	/*
	 * Add node into the database, atomically to avoid races creating the same thing
	 */
	spin_lock_bh(&ecm_ipv6_lock);
	ni = ecm_db_node_find_and_ref(node_addr, ii);
	if (ni) {
		spin_unlock_bh(&ecm_ipv6_lock);
		ecm_db_node_deref(nni);
		ecm_db_iface_deref(ii);
		return ni;
	}

	ecm_db_node_add(nni, ii, node_addr, NULL, nni);
	spin_unlock_bh(&ecm_ipv6_lock);

	/*
	 * Don't need iface instance now
	 */
	ecm_db_iface_deref(ii);

	DEBUG_TRACE("%px: node %px established\n", feci, nni);
	return nni;
}

/*
 * ecm_ipv6_host_establish_and_ref()
 *	Returns a reference to a host, possibly creating one if necessary.
 *
 * Returns NULL on failure.
 */
struct ecm_db_host_instance *ecm_ipv6_host_establish_and_ref(ip_addr_t addr)
{
	struct ecm_db_host_instance *hi;
	struct ecm_db_host_instance *nhi;

	DEBUG_INFO("Establish host for " ECM_IP_ADDR_OCTAL_FMT "\n", ECM_IP_ADDR_TO_OCTAL(addr));

	/*
	 * Locate the host
	 */
	hi = ecm_db_host_find_and_ref(addr);
	if (hi) {
		DEBUG_TRACE("%px: host established\n", hi);
		return hi;
	}

	/*
	 * No host - create one
	 */
	nhi = ecm_db_host_alloc();
	if (!nhi) {
		DEBUG_WARN("Failed to establish host\n");
		return NULL;
	}

	/*
	 * Add host into the database, atomically to avoid races creating the same thing
	 */
	spin_lock_bh(&ecm_ipv6_lock);
	hi = ecm_db_host_find_and_ref(addr);
	if (hi) {
		spin_unlock_bh(&ecm_ipv6_lock);
		ecm_db_host_deref(nhi);
		return hi;
	}

	ecm_db_host_add(nhi, addr, true, NULL, nhi);

	spin_unlock_bh(&ecm_ipv6_lock);

	DEBUG_TRACE("%px: host established\n", nhi);
	return nhi;
}

/*
 * ecm_ipv6_mapping_establish_and_ref()
 *	Returns a reference to a mapping, possibly creating one if necessary.
 *
 * Returns NULL on failure.
 */
struct ecm_db_mapping_instance *ecm_ipv6_mapping_establish_and_ref(ip_addr_t addr, int port)
{
	struct ecm_db_mapping_instance *mi;
	struct ecm_db_mapping_instance *nmi;
	struct ecm_db_host_instance *hi;

	DEBUG_INFO("Establish mapping for " ECM_IP_ADDR_OCTAL_FMT ":%u\n", ECM_IP_ADDR_TO_OCTAL(addr), port);

	/*
	 * Locate the mapping
	 */
	mi = ecm_db_mapping_find_and_ref(addr, port);
	if (mi) {
		DEBUG_TRACE("%px: mapping established\n", mi);
		return mi;
	}

	/*
	 * No mapping - establish host existence
	 */
	hi = ecm_ipv6_host_establish_and_ref(addr);
	if (!hi) {
		DEBUG_WARN("Failed to establish host\n");
		return NULL;
	}

	/*
	 * Create mapping instance
	 */
	nmi = ecm_db_mapping_alloc();
	if (!nmi) {
		ecm_db_host_deref(hi);
		DEBUG_WARN("Failed to establish mapping\n");
		return NULL;
	}

	/*
	 * Add mapping into the database, atomically to avoid races creating the same thing
	 */
	spin_lock_bh(&ecm_ipv6_lock);
	mi = ecm_db_mapping_find_and_ref(addr, port);
	if (mi) {
		spin_unlock_bh(&ecm_ipv6_lock);
		ecm_db_mapping_deref(nmi);
		ecm_db_host_deref(hi);
		return mi;
	}

	ecm_db_mapping_add(nmi, hi, port, NULL, nmi);

	spin_unlock_bh(&ecm_ipv6_lock);

	/*
	 * Don't need the host instance now - the mapping maintains a reference to it now.
	 */
	ecm_db_host_deref(hi);

	/*
	 * Return the mapping instance
	 */
	DEBUG_INFO("%px: mapping established\n", nmi);
	return nmi;
}

/*
 * ecm_ipv6_connection_regenerate()
 *	Re-generate a connection.
 *
 * Re-generating a connection involves re-evaluating the interface lists in case interface heirarchies have changed.
 * It also involves the possible triggering of classifier re-evaluation but only if all currently assigned
 * classifiers permit this operation.
 */
void ecm_ipv6_connection_regenerate(struct ecm_db_connection_instance *ci, ecm_tracker_sender_type_t sender,
							struct net_device *out_dev, struct net_device *in_dev, __be16 *layer4hdr,
							struct sk_buff *skb)
{
	int i;
	bool reclassify_allowed;
	int32_t to_list_first;
	struct ecm_db_iface_instance *to_list[ECM_DB_IFACE_HEIRARCHY_MAX];
	int32_t from_list_first;
	struct ecm_db_iface_instance *from_list[ECM_DB_IFACE_HEIRARCHY_MAX];
	ip_addr_t ip_src_addr;
	ip_addr_t ip_dest_addr;
	int protocol;
	bool is_routed;
	uint8_t src_node_addr[ETH_ALEN];
	uint8_t dest_node_addr[ETH_ALEN];
	int assignment_count;
	struct ecm_classifier_instance *assignments[ECM_CLASSIFIER_TYPES];
	struct ecm_front_end_connection_instance *feci;
	struct ecm_front_end_interface_construct_instance efeici;
	ecm_db_direction_t ecm_dir;
	struct ecm_front_end_ovs_params *from_ovs_params = NULL;
	struct ecm_front_end_ovs_params *to_ovs_params = NULL;

	DEBUG_INFO("%px: re-gen needed\n", ci);

	/*
	 * We may need to swap the devices around depending on who the sender of the packet that triggered the re-gen is
	 */
	if (sender == ECM_TRACKER_SENDER_TYPE_DEST) {
		struct net_device *tmp_dev;

		/*
		 * This is a packet sent by the destination of the connection, i.e. it is a packet issued by the 'from' side of the connection.
		 */
		DEBUG_TRACE("%px: Re-gen swap devs\n", ci);
		tmp_dev = out_dev;
		out_dev = in_dev;
		in_dev = tmp_dev;
	}

	/*
	 * Update the interface lists - these may have changed, e.g. LAG path change etc.
	 * NOTE: We never have to change the usual mapping->host->node_iface arrangements for each side of the connection (to/from sides)
	 * This is because if these interfaces change then the connection is dead anyway.
	 * But a LAG slave might change the heirarchy the connection is using but the LAG master is still sane.
	 * If any of the new interface heirarchies cannot be created then simply set empty-lists as this will deny
	 * acceleration and ensure that a bad rule cannot be created.
	 * IMPORTANT: The 'sender' defines who has sent the packet that triggered this re-generation
	 */
	protocol = ecm_db_connection_protocol_get(ci);

	is_routed = ecm_db_connection_is_routed_get(ci);
	ecm_dir = ecm_db_connection_direction_get(ci);

	ecm_db_connection_address_get(ci, ECM_DB_OBJ_DIR_FROM, ip_src_addr);

	ecm_db_connection_address_get(ci, ECM_DB_OBJ_DIR_TO, ip_dest_addr);

	ecm_db_connection_node_address_get(ci, ECM_DB_OBJ_DIR_FROM, src_node_addr);

	ecm_db_connection_node_address_get(ci, ECM_DB_OBJ_DIR_TO, dest_node_addr);

	feci = ecm_db_connection_front_end_get_and_ref(ci);

	if (!ecm_front_end_ipv6_interface_construct_set_and_hold(skb, sender, ecm_dir, is_routed,
							in_dev, out_dev,
							ip_src_addr, ip_dest_addr,
							&efeici)) {

		DEBUG_WARN("ECM front end ipv6 interface construct set failed for regeneration\n");
		goto ecm_ipv6_retry_regen;
	}

	if ((protocol == IPPROTO_TCP) || (protocol == IPPROTO_UDP)) {
		int src_port, dest_port;
		struct ecm_front_end_ovs_params ovs_params[ECM_DB_OBJ_DIR_MAX];

		src_port = ecm_db_connection_port_get(feci->ci, ECM_DB_OBJ_DIR_FROM);
		dest_port = ecm_db_connection_port_get(feci->ci, ECM_DB_OBJ_DIR_TO);

		/*
		 * For IPv6 there is no NAT address or port numbers,
		 * so we use the same IP address and port numbers from the
		 * from and to host for those fields.
		 */
		ecm_front_end_fill_ovs_params(ovs_params,
				      ip_src_addr, ip_src_addr,
				      ip_dest_addr, ip_dest_addr,
				      src_port, src_port,
				      dest_port, dest_port, ecm_dir);

		from_ovs_params = &ovs_params[ECM_DB_OBJ_DIR_FROM];
		to_ovs_params = &ovs_params[ECM_DB_OBJ_DIR_TO];
	}

	DEBUG_TRACE("%px: Update the 'from' interface heirarchy list\n", ci);
	from_list_first = ecm_interface_heirarchy_construct(feci, from_list, efeici.from_dev, efeici.from_other_dev, ip_dest_addr, efeici.from_mac_lookup_ip_addr, ip_src_addr, 6, protocol, in_dev, is_routed, in_dev, src_node_addr, dest_node_addr, layer4hdr, skb, from_ovs_params);
	if (from_list_first == ECM_DB_IFACE_HEIRARCHY_MAX) {
		ecm_front_end_ipv6_interface_construct_netdev_put(&efeici);
		goto ecm_ipv6_retry_regen;
	}

	ecm_db_connection_interfaces_reset(ci, from_list, from_list_first, ECM_DB_OBJ_DIR_FROM);
	ecm_db_connection_interfaces_deref(from_list, from_list_first);

	DEBUG_TRACE("%px: Update the 'to' interface heirarchy list\n", ci);
	to_list_first = ecm_interface_heirarchy_construct(feci, to_list, efeici.to_dev, efeici.to_other_dev, ip_src_addr, efeici.to_mac_lookup_ip_addr, ip_dest_addr, 6, protocol, out_dev, is_routed, in_dev, dest_node_addr, src_node_addr, layer4hdr, skb, to_ovs_params);
	if (to_list_first == ECM_DB_IFACE_HEIRARCHY_MAX) {
		ecm_front_end_ipv6_interface_construct_netdev_put(&efeici);
		goto ecm_ipv6_retry_regen;
	}

	ecm_front_end_ipv6_interface_construct_netdev_put(&efeici);

	feci->deref(feci);
	ecm_db_connection_interfaces_reset(ci, to_list, to_list_first, ECM_DB_OBJ_DIR_TO);
	ecm_db_connection_interfaces_deref(to_list, to_list_first);

	/*
	 * Get list of assigned classifiers to reclassify.
	 * Remember: This also includes our default classifier too.
	 */
	assignment_count = ecm_db_connection_classifier_assignments_get_and_ref(ci, assignments);

	/*
	 * All of the assigned classifiers must permit reclassification.
	 */
	reclassify_allowed = true;
	for (i = 0; i < assignment_count; ++i) {
		DEBUG_TRACE("%px: Calling to reclassify: %px, type: %d\n", ci, assignments[i], assignments[i]->type_get(assignments[i]));
		if (!assignments[i]->reclassify_allowed(assignments[i])) {
			DEBUG_TRACE("%px: reclassify denied: %px, by type: %d\n", ci, assignments[i], assignments[i]->type_get(assignments[i]));
			reclassify_allowed = false;
			break;
		}
	}

	if (!reclassify_allowed) {
		/*
		 * Regeneration came to a successful conclusion even though reclassification was denied
		 */
		DEBUG_WARN("%px: re-classify denied\n", ci);
		goto ecm_ipv6_regen_done;
	}

	/*
	 * Reclassify
	 */
	DEBUG_INFO("%px: reclassify\n", ci);
	if (!ecm_classifier_reclassify(ci, assignment_count, assignments)) {
		/*
		 * We could not set up the classifiers to reclassify, it is safer to fail out and try again next time
		 */
		DEBUG_WARN("%px: Regeneration: reclassify failed\n", ci);
		goto ecm_ipv6_regen_done;
	}
	DEBUG_INFO("%px: reclassify success\n", ci);

ecm_ipv6_regen_done:

	/*
	 * Release the assignments
	 */
	ecm_db_connection_assignments_release(assignment_count, assignments);

	/*
	 * Re-generation of state is successful.
	 */
	ecm_db_connection_regeneration_completed(ci);

	return;

ecm_ipv6_retry_regen:
	feci->deref(feci);
	ecm_db_connection_regeneration_failed(ci);
	return;
}

/*
 * ecm_ipv6_ip_process()
 *	Process IP datagram skb
 */
unsigned int ecm_ipv6_ip_process(struct net_device *out_dev, struct net_device *in_dev,
							uint8_t *src_node_addr, uint8_t *dest_node_addr,
							bool can_accel, bool is_routed, bool is_l2_encap,
							struct sk_buff *skb, uint16_t l2_encap_proto)
{
	struct ecm_tracker_ip_header ip_hdr;
	struct nf_conn *ct;
	enum ip_conntrack_info ctinfo;
	struct nf_conntrack_tuple orig_tuple;
	struct nf_conntrack_tuple reply_tuple;
	ecm_tracker_sender_type_t sender;
	ecm_db_direction_t ecm_dir = ECM_DB_DIRECTION_EGRESS_NAT;
	ip_addr_t ip_src_addr;
	ip_addr_t ip_dest_addr;
	uint8_t protonum;

	/*
	 * Obtain the IP header from the skb
	 */
	if (!ecm_tracker_ip_check_header_and_read(&ip_hdr, skb)) {
		DEBUG_WARN("Invalid ip header in skb %px\n", skb);
		return NF_ACCEPT;
	}

	/*
	 * Process only IPv6 packets
	 */
	if (ip_hdr.is_v4) {
		DEBUG_TRACE("Not an IPv6 packet, skb %px\n", skb);
		return NF_ACCEPT;
	}

	if (ip_hdr.fragmented) {
		DEBUG_TRACE("skb %px is fragmented\n", skb);
		return NF_ACCEPT;
	}

	/*
	 * Extract information, if we have conntrack then use that info as far as we can.
	 */
	ct = nf_ct_get(skb, &ctinfo);
	if (unlikely(!ct)) {
		DEBUG_TRACE("%px: no ct\n", skb);
		ECM_IP_ADDR_TO_NIN6_ADDR(orig_tuple.src.u3.in6, ip_hdr.src_addr);
		ECM_IP_ADDR_TO_NIN6_ADDR(orig_tuple.dst.u3.in6, ip_hdr.dest_addr);
		orig_tuple.dst.protonum = ip_hdr.protocol;
		ECM_IP_ADDR_TO_NIN6_ADDR(reply_tuple.src.u3.in6, ip_hdr.dest_addr);
		ECM_IP_ADDR_TO_NIN6_ADDR(reply_tuple.dst.u3.in6, ip_hdr.src_addr);
		sender = ECM_TRACKER_SENDER_TYPE_SRC;
	} else {
		/*
		 * Do not process the packet, if the conntrack is in dying state.
		 */
		if (unlikely(test_bit(IPS_DYING_BIT, &ct->status))) {
			DEBUG_WARN("%px: ct: %px is in dying state\n", skb, ct);
			return NF_ACCEPT;
		}

		/*
		 * Fake untracked conntrack objects were removed on 4.12 kernel version
		 * and onwards.
		 * So, for the newer kernels, instead of comparing the ct with the percpu
		 * fake conntrack, we can check the ct status.
		 */
#if (LINUX_VERSION_CODE < KERNEL_VERSION(4, 12, 0))
		if (unlikely(ct == nf_ct_untracked_get())) {
#else
		if (unlikely(ctinfo == IP_CT_UNTRACKED)) {
#endif
#ifdef ECM_INTERFACE_VXLAN_ENABLE
			/*
			 * If the conntrack connection is set as untracked,
			 * ECM will accept and process only VxLAN outer flows,
			 * otherwise such flows will not be processed by ECM.
			 *
			 * E.g. In the following network arramgement,
			 * Eth1 ---> Bridge ---> VxLAN0(Bridge Port) ---> Eth0(WAN)
			 * The packets from VxLAN0 to Eth0 will be routed.
			 *
			 * netif_is_vxlan API is used to identify the VxLAN device &
			 * is_routed flag is used to identify the outer flow.
			 */
			if (is_routed && netif_is_vxlan(in_dev)) {
				DEBUG_TRACE("%px: Untracked CT for VxLAN\n", skb);
				ECM_IP_ADDR_TO_NIN6_ADDR(orig_tuple.src.u3.in6, ip_hdr.src_addr);
				ECM_IP_ADDR_TO_NIN6_ADDR(orig_tuple.dst.u3.in6, ip_hdr.dest_addr);
				orig_tuple.dst.protonum = ip_hdr.protocol;
				ECM_IP_ADDR_TO_NIN6_ADDR(reply_tuple.src.u3.in6, ip_hdr.dest_addr);
				ECM_IP_ADDR_TO_NIN6_ADDR(reply_tuple.dst.u3.in6, ip_hdr.src_addr);
				sender = ECM_TRACKER_SENDER_TYPE_SRC;
				ct = NULL;
				goto vxlan_done;
			}
#endif
			DEBUG_TRACE("%px: ct: untracked\n", skb);
			return NF_ACCEPT;
		}

		/*
		 * If the conntrack connection is using a helper (i.e. Application Layer Gateway)
		 * then acceleration is denied (connection needs assistance from HLOS to function)
		 */
		if (nfct_help(ct)) {
			DEBUG_TRACE("%px: Connection has helper\n", ct);
			can_accel = false;
		}

		/*
		 * Extract conntrack connection information
		 */
		DEBUG_TRACE("%px: ct: %px, ctinfo: %x\n", skb, ct, ctinfo);
		orig_tuple = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
		reply_tuple = ct->tuplehash[IP_CT_DIR_REPLY].tuple;
		if (IP_CT_DIR_ORIGINAL == CTINFO2DIR(ctinfo)) {
			sender = ECM_TRACKER_SENDER_TYPE_SRC;
		} else {
			sender = ECM_TRACKER_SENDER_TYPE_DEST;
		}

		/*
		 * Is this a related connection?
		 */
		if ((ctinfo == IP_CT_RELATED) || (ctinfo == IP_CT_RELATED_REPLY)) {
			/*
			 * ct is related to the packet at hand.
			 * We can use the IP src/dest information and the direction information.
			 * We cannot use the protocol information from the ct (typically the packet at hand is ICMP error that is related to the ct we have here).
			 */
			orig_tuple.dst.protonum = ip_hdr.protocol;
			DEBUG_TRACE("%px: related ct, actual protocol: %u\n", skb, orig_tuple.dst.protonum);
		}
#ifdef ECM_INTERFACE_VXLAN_ENABLE
vxlan_done:
		;
#endif
	}

	/*
	 * Check if we can accelerate the GRE protocol.
	 */
	if (ip_hdr.protocol == IPPROTO_GRE) {
		if (!ecm_front_end_gre_proto_is_accel_allowed(in_dev, out_dev, skb, &orig_tuple, 6)) {
			DEBUG_WARN("%px: GRE protocol is not allowed\n", skb);
			return NF_ACCEPT;
		}
	}

	/*
	 * Check for a multicast Destination address here.
	 */
	ECM_NIN6_ADDR_TO_IP_ADDR(ip_dest_addr, orig_tuple.dst.u3.in6);
	if (ecm_ip_addr_is_multicast(ip_dest_addr)) {
		DEBUG_TRACE("skb %px multicast daddr " ECM_IP_ADDR_OCTAL_FMT "\n", skb, ECM_IP_ADDR_TO_OCTAL(ip_dest_addr));
#ifdef ECM_MULTICAST_ENABLE
		if (unlikely(ecm_front_end_ipv6_mc_stopped)) {
			DEBUG_TRACE("%px: Multicast disabled by ecm_front_end_ipv6_mc_stopped = %d\n", skb, ecm_front_end_ipv6_mc_stopped);
			return NF_ACCEPT;
		}

		if (unlikely(!ecm_front_end_is_feature_supported(ECM_FE_FEATURE_MULTICAST))) {
			DEBUG_TRACE("%px: Multicast ipv6 acceleration is not supported on selected frontend\n", skb);
			return NF_ACCEPT;
		}

		return ecm_multicast_ipv6_connection_process(out_dev, in_dev, src_node_addr, dest_node_addr,
				can_accel, is_routed, skb, &ip_hdr, ct, sender,
				&orig_tuple, &reply_tuple);
#else
		return NF_ACCEPT;
#endif
	}

	/*
	 * Work out if this packet involves routing or not.
	 */
	if (is_routed) {
		/*
		 * Non-NAT only supported for IPv6
		 */
		ecm_dir = ECM_DB_DIRECTION_NON_NAT;
	} else {
		/*
		 * Bridged
		 */
		ecm_dir = ECM_DB_DIRECTION_BRIDGED;
	}

	if (sender == ECM_TRACKER_SENDER_TYPE_SRC) {
		if (ecm_dir == ECM_DB_DIRECTION_NON_NAT) {
			ECM_NIN6_ADDR_TO_IP_ADDR(ip_src_addr, orig_tuple.src.u3.in6);
			ECM_NIN6_ADDR_TO_IP_ADDR(ip_dest_addr, orig_tuple.dst.u3.in6);

			src_node_addr = NULL;
		} else if (ecm_dir == ECM_DB_DIRECTION_BRIDGED) {
			ECM_NIN6_ADDR_TO_IP_ADDR(ip_src_addr, orig_tuple.src.u3.in6);
			ECM_NIN6_ADDR_TO_IP_ADDR(ip_dest_addr, orig_tuple.dst.u3.in6);
		} else {
			DEBUG_ASSERT(false, "Unhandled ecm_dir: %d\n", ecm_dir);
		}
	} else {
		if (ecm_dir == ECM_DB_DIRECTION_NON_NAT) {
			ECM_NIN6_ADDR_TO_IP_ADDR(ip_dest_addr, orig_tuple.src.u3.in6);
			ECM_NIN6_ADDR_TO_IP_ADDR(ip_src_addr, orig_tuple.dst.u3.in6);

			src_node_addr = NULL;
		} else if (ecm_dir == ECM_DB_DIRECTION_BRIDGED) {
			ECM_NIN6_ADDR_TO_IP_ADDR(ip_dest_addr, orig_tuple.src.u3.in6);
			ECM_NIN6_ADDR_TO_IP_ADDR(ip_src_addr, orig_tuple.dst.u3.in6);
		} else {
			DEBUG_ASSERT(false, "Unhandled ecm_dir: %d\n", ecm_dir);
		}
	}

	/*
	 * If PPPoE bridged flows are to be handled with 3-tuple rule, set protocol to IPPROTO_RAW.
	 */
	protonum = orig_tuple.dst.protonum;
#ifdef ECM_FRONT_END_NSS_ENABLE
	if (unlikely(!is_routed && (l2_encap_proto == ETH_P_PPP_SES))) {
		/*
		 * Check if PPPoE bridge acceleration is 3-tuple based.
		 */
		if (nss_pppoe_get_br_accel_mode() == NSS_PPPOE_BR_ACCEL_MODE_EN_3T) {
			DEBUG_TRACE("3-tuple acceleration is enabled for PPPoE bridged flows\n");
			protonum = IPPROTO_RAW;
		}
	}
#endif
	DEBUG_TRACE("IP Packet src: " ECM_IP_ADDR_OCTAL_FMT "dst: " ECM_IP_ADDR_OCTAL_FMT " protocol: %u, sender: %d ecm_dir: %d\n",
			ECM_IP_ADDR_TO_OCTAL(ip_src_addr),
			ECM_IP_ADDR_TO_OCTAL(ip_dest_addr),
			protonum, sender, ecm_dir);
	/*
	 * Non-unicast source or destination packets are ignored
	 * NOTE: Only need to check the non-nat src/dest addresses here.
	 */
	if (unlikely(ecm_ip_addr_is_non_unicast(ip_dest_addr))) {
		DEBUG_TRACE("skb %px non-unicast daddr " ECM_IP_ADDR_OCTAL_FMT "\n", skb, ECM_IP_ADDR_TO_OCTAL(ip_dest_addr));
		return NF_ACCEPT;
	}
	if (unlikely(ecm_ip_addr_is_non_unicast(ip_src_addr))) {
		DEBUG_TRACE("skb %px non-unicast saddr " ECM_IP_ADDR_OCTAL_FMT "\n", skb, ECM_IP_ADDR_TO_OCTAL(ip_src_addr));
		return NF_ACCEPT;
	}

	/*
	 * Process IP specific protocol
	 * TCP and UDP are the most likliest protocols.
	 */
	if (likely(protonum == IPPROTO_TCP) || likely(protonum == IPPROTO_UDP)) {
		return ecm_ported_ipv6_process(out_dev, in_dev,
				src_node_addr,
				dest_node_addr,
				can_accel, is_routed, is_l2_encap, skb,
				&ip_hdr,
				ct, sender, ecm_dir,
				&orig_tuple, &reply_tuple,
				ip_src_addr, ip_dest_addr, l2_encap_proto);
	}
#ifdef ECM_NON_PORTED_SUPPORT_ENABLE
	if (unlikely(!ecm_front_end_is_feature_supported(ECM_FE_FEATURE_NON_PORTED))) {
		DEBUG_TRACE("%px: Non-ported ipv6 acceleration is not supported on the selected frontend\n", skb);
		return NF_ACCEPT;
	}

	return ecm_non_ported_ipv6_process(out_dev, in_dev,
			src_node_addr,
			dest_node_addr,
			can_accel, is_routed, is_l2_encap, skb,
			&ip_hdr,
			ct, sender, ecm_dir,
			&orig_tuple, &reply_tuple,
			ip_src_addr, ip_dest_addr, l2_encap_proto);
#else
	return NF_ACCEPT;
#endif
}

/*
 * ecm_ipv6_post_routing_hook()
 *	Called for IP packets that are going out to interfaces after IP routing stage.
 */
static unsigned int ecm_ipv6_post_routing_hook(void *priv,
				struct sk_buff *skb,
				const struct nf_hook_state *nhs)
{
	struct net_device *out = nhs->out;
	struct net_device *in;
	bool can_accel = true;
	unsigned int result;

	DEBUG_TRACE("%px: Routing: %s\n", out, out->name);

	/*
	 * If operations have stopped then do not process packets
	 */
	spin_lock_bh(&ecm_ipv6_lock);
	if (unlikely(ecm_front_end_ipv6_stopped)) {
		spin_unlock_bh(&ecm_ipv6_lock);
		DEBUG_TRACE("Front end stopped\n");
		return NF_ACCEPT;
	}
	spin_unlock_bh(&ecm_ipv6_lock);

	/*
	 * Don't process broadcast or multicast
	 */
	if (skb->pkt_type == PACKET_BROADCAST) {
		DEBUG_TRACE("Broadcast, ignoring: %px\n", skb);
		return NF_ACCEPT;
	}

#ifndef ECM_INTERFACE_PPTP_ENABLE
	/*
	 * skip pptp because we don't accelerate them
	 */
	if (ecm_interface_is_pptp(skb, out)) {
		return NF_ACCEPT;
	}
#endif

#ifndef ECM_INTERFACE_L2TPV2_ENABLE
	/*
	 * skip l2tpv2 because we don't accelerate them
	 */
	if (ecm_interface_is_l2tp_packet_by_version(skb, out, 2)) {
		return NF_ACCEPT;
	}
#endif

	/*
	 * skip l2tpv3 because we don't accelerate them
	 */
	if (ecm_interface_is_l2tp_packet_by_version(skb, out, 3)) {
		return NF_ACCEPT;
	}

	/*
	 * Identify interface from where this packet came
	 */
	in = dev_get_by_index(&init_net, skb->skb_iif);
	if (unlikely(!in)) {
		/*
		 * Locally sourced packets are not processed in ECM.
		 */
		return NF_ACCEPT;
	}

#ifndef ECM_INTERFACE_OVS_BRIDGE_ENABLE
	/*
	 * skip OpenVSwitch flows because we don't accelerate them
	 */
	if (netif_is_ovs_master(out) || netif_is_ovs_master(in)) {
		dev_put(in);
		return NF_ACCEPT;
	}
#endif

	DEBUG_TRACE("Post routing process skb %px, out: %px, in: %px\n", skb, out, in);
	result = ecm_ipv6_ip_process((struct net_device *)out, in, NULL, NULL, can_accel, true, false, skb, 0);
	dev_put(in);
	return result;
}

/*
 * ecm_ipv6_pppoe_bridge_process()
 *	Called for PPPoE session packets that are going
 *	out to one of the bridge physical interfaces.
 */
static unsigned int ecm_ipv6_pppoe_bridge_process(struct net_device *out,
						     struct net_device *in,
						     struct ethhdr *skb_eth_hdr,
						     bool can_accel,
						     struct sk_buff *skb)
{
	struct ecm_tracker_ip_header ip_hdr;
	unsigned int result = NF_ACCEPT;
	struct pppoe_hdr *ph = pppoe_hdr(skb);
	uint16_t ppp_proto = *(uint16_t *)ph->tag;
	uint32_t encap_header_len = 0;

	ppp_proto = ntohs(ppp_proto);
	if (ppp_proto != PPP_IPV6) {
		return NF_ACCEPT;
	}

	encap_header_len = ecm_front_end_l2_encap_header_len(ntohs(skb->protocol));
	ecm_front_end_pull_l2_encap_header(skb, encap_header_len);
	skb->protocol = htons(ETH_P_IPV6);

	if (!ecm_tracker_ip_check_header_and_read(&ip_hdr, skb)) {
		DEBUG_WARN("Invalid ip header in skb %px\n", skb);
		goto skip_ipv6_process;
	}

	/*
	 * Return if destination IP address is multicast address.
	 */
	if (ecm_ip_addr_is_multicast(ip_hdr.dest_addr)) {
		DEBUG_WARN("Multicast acceleration is not support in PPPoE bridge %px\n", skb);
		goto skip_ipv6_process;
	}

	result = ecm_ipv6_ip_process(out, in, skb_eth_hdr->h_source,
					 skb_eth_hdr->h_dest, can_accel,
					 false, true, skb, ETH_P_PPP_SES);
skip_ipv6_process:
	ecm_front_end_push_l2_encap_header(skb, encap_header_len);
	skb->protocol = htons(ETH_P_PPP_SES);

	return result;
}

/*
 * ecm_ipv6_bridge_post_routing_hook()
 *	Called for packets that are going out to one of the bridge physical interfaces.
 *
 * These may have come from another bridged interface or from a non-bridged interface.
 * Conntrack information may be available or not if this skb is bridged.
 */
static unsigned int ecm_ipv6_bridge_post_routing_hook(void *priv,
					struct sk_buff *skb,
					const struct nf_hook_state *nhs)
{
	struct net_device *out = nhs->out;
	struct ethhdr *skb_eth_hdr;
	uint16_t eth_type;
	struct net_device *bridge;
	struct net_device *in;
	bool can_accel = true;
	unsigned int result = NF_ACCEPT;

	DEBUG_TRACE("%px: IPv6 CMN Bridge: %s\n", out, out->name);

	/*
	 * If operations have stopped then do not process packets
	 */
	spin_lock_bh(&ecm_ipv6_lock);
	if (unlikely(ecm_front_end_ipv6_stopped)) {
		spin_unlock_bh(&ecm_ipv6_lock);
		DEBUG_TRACE("Front end stopped\n");
		return NF_ACCEPT;
	}
	spin_unlock_bh(&ecm_ipv6_lock);

	/*
	 * Don't process broadcast or multicast
	 */
	if (skb->pkt_type == PACKET_BROADCAST) {
		DEBUG_TRACE("Broadcast, ignoring: %px\n", skb);
		return NF_ACCEPT;
	}

	/*
	 * skip l2tp/pptp because we don't accelerate them
	 */
	if (ecm_interface_is_l2tp_pptp(skb, out)) {
		return NF_ACCEPT;
	}

	/*
	 * Check packet is an IP Ethernet packet
	 */
	skb_eth_hdr = eth_hdr(skb);
	if (!skb_eth_hdr) {
		DEBUG_TRACE("%px: Not Eth\n", skb);
		return NF_ACCEPT;
	}
	eth_type = ntohs(skb_eth_hdr->h_proto);
	if (unlikely((eth_type != 0x86DD) && (eth_type != ETH_P_PPP_SES))) {
		DEBUG_TRACE("%px: Not IP/PPPoE session\n", skb);
		return NF_ACCEPT;
	}

	/*
	 * Identify interface from where this packet came.
	 * There are three scenarios to consider here:
	 * 1. Packet came from a local source.
	 *	Ignore - local is not handled.
	 * 2. Packet came from a routed path.
	 *	Ignore - it was handled in INET post routing.
	 * 3. Packet is bridged from another port.
	 *	Process.
	 *
	 * Begin by identifying case 1.
	 * NOTE: We are given 'out' (which we implicitly know is a bridge port) so out interface's master is the 'bridge'.
	 */
	bridge = ecm_interface_get_and_hold_dev_master((struct net_device *)out);
	DEBUG_ASSERT(bridge, "Expected bridge\n");
	in = dev_get_by_index(&init_net, skb->skb_iif);
	if (!in) {
		/*
		 * Case 1.
		 */
		DEBUG_TRACE("Local traffic: %px, ignoring traffic to bridge: %px (%s) \n", skb, bridge, bridge->name);
		dev_put(bridge);
		return NF_ACCEPT;
	}
	dev_put(in);

	/*
	 * Case 2:
	 *	For routed packets the skb will have the src mac matching the bridge mac.
	 * Case 3:
	 *	If the packet was not local (case 1) or routed (case 2) then
	 *	we process. There is an exception to case 2: when hairpin mode
	 *	is enabled, we process.
	 */

	/*
	 * Pass in NULL (for skb) and 0 for cookie since doing FDB lookup only
	 */
	in = br_port_dev_get(bridge, skb_eth_hdr->h_source, NULL, 0);
	if (!in) {
		DEBUG_TRACE("skb: %px, no in device for bridge: %px (%s)\n", skb, bridge, bridge->name);
		dev_put(bridge);
		return NF_ACCEPT;
	}

	/*
	 * This flag needs to be checked in slave port(eth0/ath0)
	 * and not on master interface(br-lan). Hairpin flag can be
	 * enabled/disabled for ports individually.
	 */
	if (in == out) {
		if (!br_is_hairpin_enabled(in)) {
			DEBUG_TRACE("skb: %px, bridge: %px (%s), ignoring"
					"the packet, hairpin not enabled"
					"on port %px (%s)\n", skb, bridge,
					bridge->name, out, out->name);
			goto skip_ipv6_bridge_flow;
		}
		DEBUG_TRACE("skb: %px, bridge: %px (%s), hairpin enabled on port"
				"%px (%s)\n", skb, bridge, bridge->name, out, out->name);
	}

	/*
	 * Case 2: Routed trafffic would be handled by the INET post routing.
	 */
	if (!ecm_mac_addr_equal(skb_eth_hdr->h_source, bridge->dev_addr)) {
		DEBUG_TRACE("skb: %px, Ignoring routed packet to bridge: %px (%s)\n", skb, bridge, bridge->name);
		goto skip_ipv6_bridge_flow;
	}

	if (!is_multicast_ether_addr(skb_eth_hdr->h_dest)) {
		/*
		 * Process the packet, if we have this mac address in the fdb table.
		 * TODO: For the kernel versions later than 3.6.x, the API needs vlan id.
		 * 	 For now, we are passing 0, but this needs to be handled later.
		 */
		if (!br_fdb_has_entry((struct net_device *)out, skb_eth_hdr->h_dest, 0)) {
			DEBUG_WARN("skb: %px, No fdb entry for this mac address %pM in the bridge: %px (%s)\n",
					skb, skb_eth_hdr->h_dest, bridge, bridge->name);
			goto skip_ipv6_bridge_flow;
		}
	}

	DEBUG_TRACE("Bridge process skb: %px, bridge: %px (%s), In: %px (%s), Out: %px (%s)\n",
			skb, bridge, bridge->name, in, in->name, out, out->name);

	if (unlikely(eth_type == ETH_P_PPP_SES)) {

#ifdef ECM_FRONT_END_NSS_ENABLE
		/*
		 * Check if PPPoE bridge acceleration is disabled.
		 */
		if (nss_pppoe_get_br_accel_mode() == NSS_PPPOE_BR_ACCEL_MODE_DIS) {
			DEBUG_TRACE("skb: %px, PPPoE bridge flow acceleration is disabled\n", skb);
			goto skip_ipv6_bridge_flow;
		}
#endif

		result = ecm_ipv6_pppoe_bridge_process((struct net_device *)out, in, skb_eth_hdr, can_accel, skb);
		goto skip_ipv6_bridge_flow;
	}
	result = ecm_ipv6_ip_process((struct net_device *)out, in,
							skb_eth_hdr->h_source, skb_eth_hdr->h_dest, can_accel, false, false, skb, 0);
skip_ipv6_bridge_flow:
	dev_put(in);
	dev_put(bridge);
	return result;
}

/*
 * struct nf_hook_ops ecm_ipv6_netfilter_routing_hooks[]
 *	Hooks into netfilter routing packet monitoring points.
 */
static struct nf_hook_ops ecm_ipv6_netfilter_routing_hooks[] __read_mostly = {
	/*
	 * Post routing hook is used to monitor packets going to interfaces that are NOT bridged in some way, e.g. packets to the WAN.
	 */
	{
		.hook           = ecm_ipv6_post_routing_hook,
		.pf             = PF_INET6,
		.hooknum        = NF_INET_POST_ROUTING,
		.priority       = NF_IP6_PRI_NAT_SRC + 1,
	},
};

/*
 * struct nf_hook_ops ecm_ipv6_netfilter_bridge_hooks[]
 *	Hooks into netfilter bridge packet monitoring points.
 */
static struct nf_hook_ops ecm_ipv6_netfilter_bridge_hooks[] __read_mostly = {
	/*
	 * The bridge post routing hook monitors packets going to interfaces that are part of a bridge arrangement.
	 * For example Wireles LAN (WLAN) and Wired LAN (LAN).
	 */
	{
		.hook		= ecm_ipv6_bridge_post_routing_hook,
		.pf		= PF_BRIDGE,
		.hooknum	= NF_BR_POST_ROUTING,
		.priority	= NF_BR_PRI_FILTER_OTHER,
	},
};

#ifdef ECM_INTERFACE_OVS_BRIDGE_ENABLE
/*
 * ecm_ipv6_ovs_dp_process()
 *      Process OVS IPv6 bridged packets.
 */
unsigned int ecm_ipv6_ovs_dp_process(struct sk_buff *skb, struct net_device *out)
{
	struct ethhdr *skb_eth_hdr;
	bool can_accel = true;
	struct net_device *in;

	/*
	 * If operations have stopped then do not process packets
	 */
	spin_lock_bh(&ecm_ipv6_lock);
	if (unlikely(ecm_front_end_ipv6_stopped)) {
		spin_unlock_bh(&ecm_ipv6_lock);
		DEBUG_TRACE("Front end stopped\n");
		return 1;
	}
	spin_unlock_bh(&ecm_ipv6_lock);

	/*
	 * Don't process broadcast.
	 */
	if (skb->pkt_type == PACKET_BROADCAST) {
		DEBUG_TRACE("Broadcast, ignoring: %px\n", skb);
		return 1;
	}

	/*
	 * Don't process multicast packets if Frontend does not support mcast acceleration
	 */
	if (skb->pkt_type == PACKET_MULTICAST) {
		if (!ecm_front_end_is_feature_supported(ECM_FE_FEATURE_MULTICAST)) {
			DEBUG_TRACE("Broadcast, ignoring: %px\n", skb);
			return 1;
		}
	}

	if (skb->protocol != ntohs(ETH_P_IPV6)) {
		DEBUG_WARN("%px: Wrong skb protocol: %d", skb, skb->protocol);
		return 1;
	}

	skb_eth_hdr = eth_hdr(skb);
	if (!skb_eth_hdr) {
		DEBUG_WARN("%px: Not Eth\n", skb);
		return 1;
	}

	in = dev_get_by_index(&init_net, skb->skb_iif);
	if (!in) {
		DEBUG_WARN("%px: No in device\n", skb);
		return 1;
	}

	DEBUG_TRACE("%px: in: %s out: %s skb->protocol: %x\n", skb, in->name, out->name, skb->protocol);

	if (netif_is_ovs_master(in)) {
		if (!ecm_mac_addr_equal(skb_eth_hdr->h_dest, in->dev_addr)) {
			DEBUG_TRACE("%px: in is bridge and mac address equals to packet dest, flow is routed, ignore \n", skb);
			dev_put(in);
			return 1;
		}
	}

	if (netif_is_ovs_master(out)) {
		if (!ecm_mac_addr_equal(skb_eth_hdr->h_source, out->dev_addr)) {
			DEBUG_TRACE("%px: out is bridge and mac address equals to packet source, flow is routed, ignore \n", skb);
			dev_put(in);
			return 1;
		}
	}

	ecm_ipv6_ip_process((struct net_device *)out, in,
			skb_eth_hdr->h_source, skb_eth_hdr->h_dest, can_accel, false, false, skb, ETH_P_IPV6);
	dev_put(in);

	return 0;
}

static struct ovsmgr_dp_hook_ops ecm_ipv6_dp_hooks = {
	.protocol = 6,
	.hook_num = OVSMGR_DP_HOOK_POST_FLOW_PROC,
	.hook = ecm_ipv6_ovs_dp_process,
};
#endif

/*
 * ecm_ipv6_init()
 */
int ecm_ipv6_init(struct dentry *dentry)
{
	int result;

	DEBUG_INFO("ECM CMN IPv6 init\n");

#ifdef ECM_FRONT_END_NSS_ENABLE
	result = ecm_nss_ipv6_init(dentry);
	if (result < 0) {
		DEBUG_ERROR("Can't initialize NSS ipv6\n");
		return result;
	}
#endif
	result = ecm_sfe_ipv6_init(dentry);
	if (result < 0) {
		DEBUG_ERROR("Can't initialize SFE ipv6\n");
		goto sfe_ipv6_failed;
	}

	/*
	 * Register netfilter routing hooks
	 */
#if (LINUX_VERSION_CODE < KERNEL_VERSION(4, 13, 0))
	result = nf_register_hooks(ecm_ipv6_netfilter_routing_hooks, ARRAY_SIZE(ecm_ipv6_netfilter_routing_hooks));
#else
	result = nf_register_net_hooks(&init_net, ecm_ipv6_netfilter_routing_hooks, ARRAY_SIZE(ecm_ipv6_netfilter_routing_hooks));
#endif
	if (result < 0) {
		DEBUG_ERROR("Can't register common netfilter routing hooks.\n");
		goto nf_register_failed_1;
	}

	/*
	 * Register netfilter bridge hooks, if the frontend type supports it. SFE only mode doesn't support it.
	 */
	if (ecm_front_end_is_feature_supported(ECM_FE_FEATURE_BRIDGE)) {
#if (LINUX_VERSION_CODE < KERNEL_VERSION(4, 13, 0))
		result = nf_register_hooks(ecm_ipv6_netfilter_bridge_hooks, ARRAY_SIZE(ecm_ipv6_netfilter_bridge_hooks));
#else
		result = nf_register_net_hooks(&init_net, ecm_ipv6_netfilter_bridge_hooks, ARRAY_SIZE(ecm_ipv6_netfilter_bridge_hooks));
#endif
		if (result < 0) {
			DEBUG_ERROR("Can't register common netfilter bridge hooks.\n");
			goto nf_register_failed_2;
		}
	}

	/*
	 * Register Ovs Bridge DP hooks for frontends that supports bridge acceleration
	 */
#ifdef ECM_INTERFACE_OVS_BRIDGE_ENABLE
	if (ecm_front_end_is_feature_supported(ECM_FE_FEATURE_OVS_BRIDGE)) {
		ovsmgr_dp_hook_register(&ecm_ipv6_dp_hooks);
	}
#endif
	return 0;

nf_register_failed_2:
#if (LINUX_VERSION_CODE < KERNEL_VERSION(4, 13, 0))
	nf_unregister_hooks(ecm_ipv6_netfilter_routing_hooks, ARRAY_SIZE(ecm_ipv6_netfilter_routing_hooks));
#else
	nf_unregister_net_hooks(&init_net, ecm_ipv6_netfilter_routing_hooks, ARRAY_SIZE(ecm_ipv6_netfilter_routing_hooks));
#endif
nf_register_failed_1:
	ecm_sfe_ipv6_exit();

sfe_ipv6_failed:
#ifdef ECM_FRONT_END_NSS_ENABLE
	ecm_nss_ipv6_exit();
#endif
	return result;
}

/*
 * ecm_ipv6_exit()
 */
void ecm_ipv6_exit(void)
{
	DEBUG_INFO("ECM CMN IPv6 Module exit\n");

	spin_lock_bh(&ecm_ipv6_lock);
	ecm_ipv6_terminate_pending = true;
	spin_unlock_bh(&ecm_ipv6_lock);

	/*
	 * Unregister netfilter bridge hooks, if the frontend type supports it. SFE only mode doesn't support it.
	 */
	if (ecm_front_end_is_feature_supported(ECM_FE_FEATURE_BRIDGE)) {
#if (LINUX_VERSION_CODE < KERNEL_VERSION(4, 13, 0))
		nf_unregister_hooks(ecm_ipv6_netfilter_bridge_hooks, ARRAY_SIZE(ecm_ipv6_netfilter_bridge_hooks));
#else
		nf_unregister_net_hooks(&init_net, ecm_ipv6_netfilter_bridge_hooks, ARRAY_SIZE(ecm_ipv6_netfilter_bridge_hooks));
#endif
	}

	/*
	 * Unregister the netfilter routing hooks.
	 */
#if (LINUX_VERSION_CODE < KERNEL_VERSION(4, 13, 0))
	nf_unregister_hooks(ecm_ipv6_netfilter_routing_hooks, ARRAY_SIZE(ecm_ipv6_netfilter_routing_hooks));
#else
	nf_unregister_net_hooks(&init_net, ecm_ipv6_netfilter_routing_hooks, ARRAY_SIZE(ecm_ipv6_netfilter_routing_hooks));
#endif
#ifdef ECM_INTERFACE_OVS_BRIDGE_ENABLE
	if (ecm_front_end_is_feature_supported(ECM_FE_FEATURE_OVS_BRIDGE)) {
		ovsmgr_dp_hook_unregister(&ecm_ipv6_dp_hooks);
	}
#endif
	ecm_sfe_ipv6_exit();
#ifdef ECM_FRONT_END_NSS_ENABLE
	ecm_nss_ipv6_exit();
#endif
}