# function list

config PXP_EMULATOR
	bool "Amlogic Pxp emulater flag"
	help
		Support PXP environment

config PXP_DDR
	bool "Amlogic Pxp ddr flag"
	help
		Support PXP ddr environment
		If this config is open, then DDR is running under PXP/PTM mode,
		Which is simulation by software. The behavivor is not same
		as real SOC. This config must be closed if running on real
		chips.

config PXP_STO
	bool "Amlogic Pxp storage flag"
	help
		Support PxP storage preload mode.
		When it's enabled, data were load to ram background.
		When it's disabled, data were load to the storage media
		module which makes the routine works much more like the
		silicon chip.

config PXP_SCS
	bool "Amlogic Pxp scs flag"
	help
		Support PXP scs environment
		If this option is open, then SCS check may be disabled for
		fast PXP bring up. This config should be closed if SCS feature
		is ready.

config AML_BL33_COMPRESS_ENABLE
	bool "Amlogic U-boot compress"
	help
		Support U-boot compress function

config AML_CRYPTO_AES
	bool "Amlogic Crypto AES for Secure Boot"
	help
		"Support AES for Amlogic Secure Boot"

config AML_SECURE_BOOT_V3
	bool "Amlogic SecureBoot V3"
	help
		"Support Amlogic SecureBoot V3 version"

config FIP_IMG_SUPPORT
	bool "Amlogic FIP IMG format file"
	help
		"Support Amlogic FIP IMG format"

config AML_SECURE_UBOOT
	bool "Amlogic SecureBoot function"
	help
		"Support Amlogic SecureBoot function"

config AML_CRYPTO_UBOOT
	bool "Encrypt Amlogic U-boot"
	help
		"Support U-boot encrypt function"

config UBOOT_RUN_IN_SRAM
	bool "Amlogic U-boot run in sram"
	default n
	help
		"Support Amlogic U-boot run in SRAM"

config AML_TSENSOR
	bool "Amlogic Temp Sensor"
	help
		"Support Amlogic Thermal Sensor"

config AML_TSENSOR_COOL
	bool "Amlogic HIGH TEMP COOL"
	depends on AML_TSENSOR
	help
		"Support Amlogic High Temperature Cool"

config AML_OSCRING
	bool "Amlogic OSCRING MSR"
	help
		"Support Amlogic chip oscring msr"

config SYS_VENDOR
	string "Vendor name"
	default "amlogic"
	help
	  This option contains information about board name.
	  Based on this option board/<CONFIG_SYS_VENDOR>/<CONFIG_SYS_BOARD> will
	  be used.

config NEED_BL32
	bool "Enable bl32"
	default n
	help
		"Support bl32 function"

config RAMDISK_MEM_ADDR
	hex
	default 0x0a000000
	help
		"select ramdisk load address"

config DTB_MEM_ADDR
	hex
	default 0x01000000
	help
		"select Device tree load address"

config MULTI_DTB
	bool "Amlogic Multi-DT function"
	default n
	help
		"Support Multi-DT function"

config DDR_FULL_FW
	bool "full ddr fw support for soc using advanced boot loader"
	default n
	help
		Support full ddr fw for soc using advanced boot loader as
		bl2, such as sc2/t7/s4/t3....

if MESON_GXBB

config TARGET_ODROID_C2
	bool "ODROID-C2"
	help
	  ODROID-C2 is a single board computer based on Meson GXBaby
	  with 2 GiB of RAM, Gigabit Ethernet, HDMI, 4 USB, micro-SD
	  slot, eMMC, IR receiver and a 40-pin GPIO header.

endif

if MESON_GXL

config SYS_SOC
	default "gxl"

config TARGET_P212
	bool "P212"
	help
	  P212 is a reference dessign board based on Meson GXL S905X SoC
	  with 2 GiB of RAM, Ethernet, HDMI, 2 USB, micro-SD slot,
	  eMMC, IR receiver, CVBS+Audio jack and a SDIO WiFi module.

config TARGET_LIBRETECH_CC
	bool "LIBRETECH-CC"
	help
	  LibreTech CC is a single board computer based on Meson GXL
	  with 2 GiB of RAM, Ethernet, HDMI, 4 USB, micro-SD slot,
	  eMMC, IR receiver and a 40-pin GPIO header.

config TARGET_KHADAS_VIM
	bool "KHADAS-VIM"
	help
	  Khadas VIM is a single board computer based on Meson GXL
	  with 2 GiB of RAM, Ethernet, HDMI, 4 USB, micro-SD slot,
	  eMMC, IR receiver and a 40-pin GPIO header.

endif

# G12A series boards

if MESON_A1

config SYS_SOC
	default "a1"

choice
	prompt "A1 Board"

config A1_AD401_NOR_RTOS
	bool "A1_AD401_NOR_RTOS"
	select TARGET_A1_AD401
	select MTD_SPI_FLASH
	select SYSTEM_RTOS
	help
	  Select A1 AD401 NOR RTOS board config

config A1_AD401_NAND_RTOS
	bool "A1_AD401_NAND_RTOS"
	select TARGET_A1_AD401
	#select SPI_NAND
	select MTD_SPI_NAND
	select SYSTEM_RTOS
	help
	  Select A1 AD401 NOR RTOS board config

config A1_AD401_NAND_LINUX
	bool "A1_AD401_NAND_LINUX"
	select TARGET_A1_AD401
	#select SPI_NAND
	select MTD_SPI_NAND
	help
	  Select A1 AD401 NOR RTOS board config

config A1_AD402_NOR_RTOS
	bool "A1_AD402_NOR_RTOS"
	select TARGET_A1_AD402
	select MTD_SPI_FLASH
	select SYSTEM_RTOS
	help
	  Select A1 AD402 NOR RTOS board config

config A1_AD402_NAND_RTOS
	bool "A1_AD402_NAND_RTOS"
	select TARGET_A1_AD402
	#select SPI_NAND
	select MTD_SPI_NAND
	select SYSTEM_RTOS
	help
	  Select A1 AD402 NOR RTOS board config

config A1_AD402_NAND_LINUX
	bool "A1_AD402_NAND_LINUX"
	select TARGET_A1_AD402
	#select SPI_NAND
	select MTD_SPI_NAND
	help
	  Select A1 AD402 NOR RTOS board config

config A1_AD409_NOR_RTOS
	bool "A1_AD409_NOR_RTOS"
	select TARGET_A1_AD409
	select MTD_SPI_FLASH
	select SYSTEM_RTOS
	help
	  Select A1 AD409 NOR RTOS board config

config A1_AD409_NAND_RTOS
	bool "A1_AD409_NAND_RTOS"
	select TARGET_A1_AD409
	#select SPI_NAND
	select MTD_SPI_NAND
	select SYSTEM_RTOS
	help
	  Select A1 AD409 NOR RTOS board config

config A1_AD409_NAND_LINUX
	bool "A1_AD409_NAND_LINUX"
	select TARGET_A1_AD409
	#select SPI_NAND
	select MTD_SPI_NAND
	help
	  Select A1 AD409 NOR RTOS board config

endchoice

config TARGET_A1_AD401
	bool "A1 AD401 board"
	depends on A1_AD401_NOR_RTOS || A1_AD401_NAND_RTOS || A1_AD401_NAND_LINUX

config TARGET_A1_AD402
	bool "A1 AD402 board"
	depends on A1_AD402_NOR_RTOS || A1_AD402_NAND_RTOS || A1_AD402_NAND_LINUX

config TARGET_A1_AD409
	bool "A1 AD409 board"
	depends on A1_AD409_NOR_RTOS || A1_AD409_NAND_RTOS || A1_AD409_NAND_LINUX

config SYSTEM_RTOS
	bool "SYSTEM_RTOS_PARTITION"
	default n
	depends on A1_AD401_NOR_RTOS || A1_AD402_NOR_RTOS || A1_AD409_NOR_RTOS || A1_AD401_NAND_RTOS || A1_AD402_NAND_RTOS || A1_AD409_NAND_RTOS
	help
	  Select SYSTEM RTOS partition table

endif


if MESON_C1

config SYS_SOC
	default "c1"

choice
	prompt "C1 Board"

config C1_AE409
	bool "C1_AE409"
	select TARGET_C1_AE409
	help
	  Select C1 SKT(AE409) config

config C1_AE400
	bool "C1_AE400"
	select TARGET_C1_AE400
	help
	  Select C1 AE400 config

config C1_AE401
	bool "C1_AE401"
	select TARGET_C1_AE401
	help
	  Select C1 AE401 config

config C1_AE402
	bool "C1_AE402"
	select TARGET_C1_AE402
	help
	  Select C1 AE402 config

endchoice

config TARGET_C1_AE409
	bool "C1 AE409 board"
	depends on C1_AE409

config TARGET_C1_AE400
	bool "C1 AE400 board"
	depends on C1_AE400

config TARGET_C1_AE401
	bool "C1 AE401 board"
	depends on C1_AE401

config TARGET_C1_AE402
	bool "C1 AE402 board"
	depends on C1_AE402

endif

if MESON_S4

config SYS_SOC
	default "s4"

config DDRFW_TYPE
	string "S4 DDR FW Type"
	default "ddr4"

config CHIPSET_NAME
        string "S4 CHIPSET NAME"
        default "s905y4"

config CHIPSET_VARIANT
        string "S4 CHIPSET VARIANT"
        default ""

config AMLOGIC_KEY_TYPE
        string "S4 AMLOGIC KEY TYPE"
        default "dev-keys"

config BL30_SELECT
	string "S4 BL30 board config"
	default "sc2_ah219"

choice
	prompt "S4 Board"

config S4_SKT
	bool "S4_SKT"
	select TARGET_S4_SKT
	help
		Select S4 SKT(XXXX) config

config S4_AP222
	bool "S4_AP222"
	select TARGET_S4_AP222
	help
		Select S4 AP222(XXXX) config

config S4_AP229
	bool "S4_AP229"
	select TARGET_S4_AP229
	help
		Select S4 AP229(XXXX) config

config S4_AQ222
	bool "S4_AQ222"
	select TARGET_S4_AQ222
	help
		Select S4 AQ222(XXXX) config

config S4_AQ229
	bool "S4_AQ229"
	select TARGET_S4_AQ229
	help
		Select S4 AQ229(XXXX) config


config S4_T211
	bool "S4_T211"
	select TARGET_S4_T211
	help
		Select S4 T211(XXXX) config

config S4_AP201
	bool "S4_AP201"
	select TARGET_S4_AP201
	help
		Select S4 AP201(XXXX) config

endchoice

config TARGET_S4_SKT
	bool "S4 SKT board"
	depends on S4_SKT

config TARGET_S4_AP222
	bool "S4 AP222 board"
	depends on S4_AP222

config TARGET_S4_AP229
	bool "S4 AP229 board"
	depends on S4_AP229

config TARGET_S4_AQ222
	bool "S4 AQ222 board"
	depends on S4_AQ222

config TARGET_S4_AQ229
	bool "S4 AQ229 board"
	depends on S4_AQ229

config TARGET_S4_T211
	bool "S4 T211 board"
	depends on S4_T211

config TARGET_S4_AP201
	bool "S4 AP201 board"
	depends on S4_AP201

endif

if MESON_SC2

config SYS_SOC
	default "sc2"

config DDRFW_TYPE
	string "SC2 DDR FW Type"
	default "ddr4"

config CHIPSET_NAME
	string "SC2 CHIPSET NAME"
	default "S905X4"

config CHIPSET_VARIANT
	string "SC2 CHIPSET VARIANT"
	default ""

config AMLOGIC_KEY_TYPE
	string "SC2 AMLOGIC KEY TYPE"
	default "dev-keys"

config BL30_SELECT
	string "SC2 BL30 board config"
	default "sc2_ah219"

choice
	prompt "SC2 Board"

config SC2_SKT
	bool "SC2_SKT"
	select TARGET_SC2_SKT
	help
	  Select SC2 SKT(XXXX) config

config SC2_AH219
	bool "SC2_AH219"
	select TARGET_SC2_AH219
	help
	  Select SC2 AH219 config

config SC2_AH212
	bool "SC2_AH212"
	select TARGET_SC2_AH212
	help
	  Select SC2 AH212 config

config SC2_AH232
	bool "SC2_AH232"
	select TARGET_SC2_AH232
	help
	  Select SC2 AH232 config

config SC2_AH212_DDR3
	bool "SC2_AH212_DDR3"
	select TARGET_SC2_AH212_DDR3
	help
	  Select SC2 AH212 DDR3 config

config SC2_AH212_LPDDR3
	bool "SC2_AH212_LPDDR3"
	select TARGET_SC2_AH212_LPDDR3
	help
	  Select SC2 AH212 LPDDR3 config

config SC2_AH212_LPDDR4
	bool "SC2_AH212_LPDDR4"
	select TARGET_SC2_AH212_LPDDR4
	help
	  Select SC2 AH212 LPDDR4 config

endchoice

config TARGET_SC2_SKT
	bool "SC2 SKT board"
	depends on SC2_SKT

config TARGET_SC2_AH219
	bool "SC2 AH219 board"
	depends on SC2_AH219

config TARGET_SC2_AH212
	bool "SC2 AH212 board"
	depends on SC2_AH212

config TARGET_SC2_AH232
	bool "SC2 AH232 board"
	depends on SC2_AH232

config TARGET_SC2_AH212_DDR3
	bool "SC2 AH212 ddr3 board"
	depends on SC2_AH212_DDR3

config TARGET_SC2_AH212_LPDDR3
	bool "SC2 AH212 lpddr3 board"
	depends on SC2_AH212_LPDDR3

config TARGET_SC2_AH212_LPDDR4
	bool "SC2 AH212 lpddr4 board"
	depends on SC2_AH212_LPDDR4

endif

if MESON_T7

config SYS_SOC
	default "t7"

config DDRFW_TYPE
	string "T7 DDR FW Type"
	default "ddr4"

config CHIPSET_NAME
	string "T7 CHIPSET NAME"
	default "POP1"

config CHIPSET_VARIANT
	string "T7 CHIPSET VARIANT"
	default ""

config AMLOGIC_KEY_TYPE
	string "T7 AMLOGIC KEY TYPE"
	default "dev-keys"

config BL30_SELECT
	string "T7 BL30 board config"
	default "sc2_ah219"

choice
	prompt "T7 Board"

config T7_SKT
	bool "T7_SKT"
	select TARGET_T7_SKT
	help
	  Select T7 SKT(XXXX) config

config T7_AN408_LPDDR4X
	bool "T7_AN408_LPDDR4X"
	select TARGET_T7_AN408_LPDDR4X
	help
	  Select T7 AN408 LPDDR4X config

config T7_AN409_DDR4
	bool "T7_AN409_DDR4"
	select TARGET_T7_AN409_DDR4
	help
	  Select T7 AN409 DDR4 config

config T7_AN400_LPDDR4X
	bool "T7_AN400_LPDDR4X"
	select TARGET_T7_AN400_LPDDR4X
	help
	  Select T7 AN400 LPDDR4X config

config T7_T319
	bool "T7_T319"
	select TARGET_T7_T319
	help
	  Select T7 T319 config

config T7_AN40A1
	bool "T7_AN40A1"
	select TARGET_T7_AN40A1
	help
	  Select T7 AN40A1 config

config T7_AN400P_LPDDR4X
	bool "T7_AN400P_LPDDR4X"
	select TARGET_T7_AN400P_LPDDR4X
	help
	  Select T7 AN400P LPDDR4X config

endchoice

config TARGET_T7_SKT
	bool "T7 SKT board"
	depends on T7_SKT

config TARGET_T7_AN408_LPDDR4X
	bool "T7 AN408 lpddr4x board"
	depends on T7_AN408_LPDDR4X

config TARGET_T7_AN409_DDR4
	bool "T7 AN409 ddr4 board"
	depends on T7_AN409_DDR4

config TARGET_T7_AN400_LPDDR4X
	bool "T7 AN400 lpddr4x board"
	depends on T7_AN400_LPDDR4X

config TARGET_T7_T319
	bool "T7 T319 board"
	depends on T7_T319

config TARGET_T7_AN40A1
	bool "T7 AN40A1 board"
	depends on T7_AN40A1

config TARGET_T7_AN400P_LPDDR4X
	bool "T7 AN400P lpddr4x board"
	depends on T7_AN400P_LPDDR4X

endif

if MESON_C2

config SYS_SOC
	default "c2"

choice
	prompt "C2 Board"

config C2_SKT
	bool "C2_SKT"
	select TARGET_C2_SKT
	help
	  Select C2 SKT config mainly for pxp

config C2_AF409
	bool "C2_AF409"
	select TARGET_C2_AF409
	help
	  Select C2_AF409 (SKT) config

config C2_AF400
	bool "C2_AF400"
	select TARGET_C2_AF400
	help
	  Select C2_AF400 config

config C2_AF401
	bool "C2_AF401"
	select TARGET_C2_AF401
	help
	  Select C2_AF401 config

config C2_AF402
	bool "C2_AF402"
	select TARGET_C2_AF402
	help
	  Select C2_AF402 config

config C2_AF419
	bool "C2_AF419"
	select TARGET_C2_AF419
	help
	  Select C2_AF419 config

endchoice

config TARGET_C2_SKT
	bool "C2 SKT board"
	depends on C2_SKT

config TARGET_C2_AF409
	bool "C2 AF409 board"
	depends on C2_AF409


config TARGET_C2_AF400
	bool "C2 AF400 board"
	depends on C2_AF400

config TARGET_C2_AF401
	bool "C2 AF401 board"
	depends on C2_AF401

config TARGET_C2_AF402
	bool "C2 AF402 board"
	depends on C2_AF402

config TARGET_C2_AF419
	bool "C2 AF419 board"
	depends on C2_AF419

endif

if MESON_G12A

config SYS_SOC
	default "g12a"

config TARGET_G12A_U200_V1
	bool "G12A_U200_V1"

config TARGET_G12A_U211_V1
	bool "G12A_U211_V1"

config TARGET_SM1_AC200_V1
	bool "SM1_AC200_V1"

endif

if MESON_G12B

config SYS_SOC
	default "g12b"

config TARGET_G12B_W400_V1
	bool "G12B_W400_V1"

endif

# Amlogic boards

source "board/amlogic/a1_ad409/Kconfig"

source "board/amlogic/a1_ad401/Kconfig"

source "board/amlogic/a1_ad402/Kconfig"

source "board/amlogic/c1_ae400/Kconfig"

source "board/amlogic/c1_ae401/Kconfig"

source "board/amlogic/c1_ae402/Kconfig"

source "board/amlogic/c1_ae409/Kconfig"

source "board/amlogic/s4_skt/Kconfig"

source "board/amlogic/s4_ap222/Kconfig"

source "board/amlogic/s4_ap229/Kconfig"

source "board/amlogic/s4_aq222/Kconfig"

source "board/amlogic/s4_aq229/Kconfig"

source "board/amlogic/s4_t211/Kconfig"

source "board/amlogic/s4_ap201/Kconfig"

source "board/amlogic/sc2_skt/Kconfig"

source "board/amlogic/sc2_ah219/Kconfig"

source "board/amlogic/sc2_ah212/Kconfig"

source "board/amlogic/sc2_ah232/Kconfig"

source "board/amlogic/sc2_ah212_ddr3/Kconfig"

source "board/amlogic/sc2_ah212_lpddr3/Kconfig"

source "board/amlogic/sc2_ah212_lpddr4/Kconfig"

source "board/amlogic/c2_skt/Kconfig"

source "board/amlogic/c2_af409/Kconfig"

source "board/amlogic/c2_af400/Kconfig"

source "board/amlogic/c2_af401/Kconfig"

source "board/amlogic/c2_af402/Kconfig"

source "board/amlogic/c2_af419/Kconfig"

source "board/amlogic/g12a_u200_v1/Kconfig"

source "board/amlogic/g12b_w400_v1/Kconfig"

source "board/amlogic/sm1_ac200_v1/Kconfig"

source "board/amlogic/t7_skt/Kconfig"

source "board/amlogic/t7_an408_lpddr4x/Kconfig"

source "board/amlogic/t7_an409_ddr4/Kconfig"

source "board/amlogic/t7_an400_lpddr4x/Kconfig"

source "board/amlogic/t7_t319/Kconfig"

source "board/amlogic/t7_an40a1/Kconfig"

source "board/amlogic/t7_an400p_lpddr4x/Kconfig"