| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2008 Semihalf |
| * |
| * (C) Copyright 2000-2005 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| ******************************************************************** |
| * NOTE: This header file defines an interface to U-Boot. Including |
| * this (unmodified) header file in another file is considered normal |
| * use of U-Boot, and does *not* fall under the heading of "derived |
| * work". |
| ******************************************************************** |
| */ |
| |
| #ifndef __IMAGE_H__ |
| #define __IMAGE_H__ |
| |
| #include "compiler.h" |
| #include <asm/byteorder.h> |
| #include <stdbool.h> |
| |
| /* Define this to avoid #ifdefs later on */ |
| struct lmb; |
| struct fdt_region; |
| |
| #ifdef USE_HOSTCC |
| #include <sys/types.h> |
| |
| /* new uImage format support enabled on host */ |
| #define IMAGE_ENABLE_FIT 1 |
| #define IMAGE_ENABLE_OF_LIBFDT 1 |
| #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ |
| #define CONFIG_FIT_ENABLE_RSASSA_PSS_SUPPORT 1 |
| #define CONFIG_FIT_ENABLE_SHA256_SUPPORT |
| #define CONFIG_SHA1 |
| #define CONFIG_SHA256 |
| |
| #define IMAGE_ENABLE_IGNORE 0 |
| #define IMAGE_INDENT_STRING "" |
| |
| #else |
| |
| #include <lmb.h> |
| #include <asm/u-boot.h> |
| #include <command.h> |
| |
| /* Take notice of the 'ignore' property for hashes */ |
| #define IMAGE_ENABLE_IGNORE 1 |
| #define IMAGE_INDENT_STRING " " |
| |
| #define IMAGE_ENABLE_FIT CONFIG_IS_ENABLED(FIT) |
| #define IMAGE_ENABLE_OF_LIBFDT CONFIG_IS_ENABLED(OF_LIBFDT) |
| |
| #endif /* USE_HOSTCC */ |
| |
| #if IMAGE_ENABLE_FIT |
| #include <hash.h> |
| #include <linux/libfdt.h> |
| #include <fdt_support.h> |
| # ifdef CONFIG_SPL_BUILD |
| # ifdef CONFIG_SPL_CRC32_SUPPORT |
| # define IMAGE_ENABLE_CRC32 1 |
| # endif |
| # ifdef CONFIG_SPL_MD5_SUPPORT |
| # define IMAGE_ENABLE_MD5 1 |
| # endif |
| # ifdef CONFIG_SPL_SHA1_SUPPORT |
| # define IMAGE_ENABLE_SHA1 1 |
| # endif |
| # else |
| # define CONFIG_CRC32 /* FIT images need CRC32 support */ |
| # define IMAGE_ENABLE_CRC32 1 |
| # define IMAGE_ENABLE_MD5 1 |
| # define IMAGE_ENABLE_SHA1 1 |
| # endif |
| |
| #ifndef IMAGE_ENABLE_CRC32 |
| #define IMAGE_ENABLE_CRC32 0 |
| #endif |
| |
| #ifndef IMAGE_ENABLE_MD5 |
| #define IMAGE_ENABLE_MD5 0 |
| #endif |
| |
| #ifndef IMAGE_ENABLE_SHA1 |
| #define IMAGE_ENABLE_SHA1 0 |
| #endif |
| |
| #if defined(CONFIG_FIT_ENABLE_SHA256_SUPPORT) || \ |
| defined(CONFIG_SPL_SHA256_SUPPORT) |
| #define IMAGE_ENABLE_SHA256 1 |
| #else |
| #define IMAGE_ENABLE_SHA256 0 |
| #endif |
| |
| #endif /* IMAGE_ENABLE_FIT */ |
| |
| #ifdef CONFIG_SYS_BOOT_GET_CMDLINE |
| # define IMAGE_BOOT_GET_CMDLINE 1 |
| #else |
| # define IMAGE_BOOT_GET_CMDLINE 0 |
| #endif |
| |
| #ifdef CONFIG_OF_BOARD_SETUP |
| # define IMAGE_OF_BOARD_SETUP 1 |
| #else |
| # define IMAGE_OF_BOARD_SETUP 0 |
| #endif |
| |
| #ifdef CONFIG_OF_SYSTEM_SETUP |
| # define IMAGE_OF_SYSTEM_SETUP 1 |
| #else |
| # define IMAGE_OF_SYSTEM_SETUP 0 |
| #endif |
| |
| enum ih_category { |
| IH_ARCH, |
| IH_COMP, |
| IH_OS, |
| IH_TYPE, |
| |
| IH_COUNT, |
| }; |
| |
| /* |
| * Operating System Codes |
| * |
| * The following are exposed to uImage header. |
| * New IDs *MUST* be appended at the end of the list and *NEVER* |
| * inserted for backward compatibility. |
| */ |
| enum { |
| IH_OS_INVALID = 0, /* Invalid OS */ |
| IH_OS_OPENBSD, /* OpenBSD */ |
| IH_OS_NETBSD, /* NetBSD */ |
| IH_OS_FREEBSD, /* FreeBSD */ |
| IH_OS_4_4BSD, /* 4.4BSD */ |
| IH_OS_LINUX, /* Linux */ |
| IH_OS_SVR4, /* SVR4 */ |
| IH_OS_ESIX, /* Esix */ |
| IH_OS_SOLARIS, /* Solaris */ |
| IH_OS_IRIX, /* Irix */ |
| IH_OS_SCO, /* SCO */ |
| IH_OS_DELL, /* Dell */ |
| IH_OS_NCR, /* NCR */ |
| IH_OS_LYNXOS, /* LynxOS */ |
| IH_OS_VXWORKS, /* VxWorks */ |
| IH_OS_PSOS, /* pSOS */ |
| IH_OS_QNX, /* QNX */ |
| IH_OS_U_BOOT, /* Firmware */ |
| IH_OS_RTEMS, /* RTEMS */ |
| IH_OS_ARTOS, /* ARTOS */ |
| IH_OS_UNITY, /* Unity OS */ |
| IH_OS_INTEGRITY, /* INTEGRITY */ |
| IH_OS_OSE, /* OSE */ |
| IH_OS_PLAN9, /* Plan 9 */ |
| IH_OS_OPENRTOS, /* OpenRTOS */ |
| IH_OS_ARM_TRUSTED_FIRMWARE, /* ARM Trusted Firmware */ |
| IH_OS_TEE, /* Trusted Execution Environment */ |
| |
| IH_OS_COUNT, |
| }; |
| |
| /* |
| * CPU Architecture Codes (supported by Linux) |
| * |
| * The following are exposed to uImage header. |
| * New IDs *MUST* be appended at the end of the list and *NEVER* |
| * inserted for backward compatibility. |
| */ |
| enum { |
| IH_ARCH_INVALID = 0, /* Invalid CPU */ |
| IH_ARCH_ALPHA, /* Alpha */ |
| IH_ARCH_ARM, /* ARM */ |
| IH_ARCH_I386, /* Intel x86 */ |
| IH_ARCH_IA64, /* IA64 */ |
| IH_ARCH_MIPS, /* MIPS */ |
| IH_ARCH_MIPS64, /* MIPS 64 Bit */ |
| IH_ARCH_PPC, /* PowerPC */ |
| IH_ARCH_S390, /* IBM S390 */ |
| IH_ARCH_SH, /* SuperH */ |
| IH_ARCH_SPARC, /* Sparc */ |
| IH_ARCH_SPARC64, /* Sparc 64 Bit */ |
| IH_ARCH_M68K, /* M68K */ |
| IH_ARCH_NIOS, /* Nios-32 */ |
| IH_ARCH_MICROBLAZE, /* MicroBlaze */ |
| IH_ARCH_NIOS2, /* Nios-II */ |
| IH_ARCH_BLACKFIN, /* Blackfin */ |
| IH_ARCH_AVR32, /* AVR32 */ |
| IH_ARCH_ST200, /* STMicroelectronics ST200 */ |
| IH_ARCH_SANDBOX, /* Sandbox architecture (test only) */ |
| IH_ARCH_NDS32, /* ANDES Technology - NDS32 */ |
| IH_ARCH_OPENRISC, /* OpenRISC 1000 */ |
| IH_ARCH_ARM64, /* ARM64 */ |
| IH_ARCH_ARC, /* Synopsys DesignWare ARC */ |
| IH_ARCH_X86_64, /* AMD x86_64, Intel and Via */ |
| IH_ARCH_XTENSA, /* Xtensa */ |
| IH_ARCH_RISCV, /* RISC-V */ |
| |
| IH_ARCH_COUNT, |
| }; |
| |
| /* |
| * Image Types |
| * |
| * "Standalone Programs" are directly runnable in the environment |
| * provided by U-Boot; it is expected that (if they behave |
| * well) you can continue to work in U-Boot after return from |
| * the Standalone Program. |
| * "OS Kernel Images" are usually images of some Embedded OS which |
| * will take over control completely. Usually these programs |
| * will install their own set of exception handlers, device |
| * drivers, set up the MMU, etc. - this means, that you cannot |
| * expect to re-enter U-Boot except by resetting the CPU. |
| * "RAMDisk Images" are more or less just data blocks, and their |
| * parameters (address, size) are passed to an OS kernel that is |
| * being started. |
| * "Multi-File Images" contain several images, typically an OS |
| * (Linux) kernel image and one or more data images like |
| * RAMDisks. This construct is useful for instance when you want |
| * to boot over the network using BOOTP etc., where the boot |
| * server provides just a single image file, but you want to get |
| * for instance an OS kernel and a RAMDisk image. |
| * |
| * "Multi-File Images" start with a list of image sizes, each |
| * image size (in bytes) specified by an "uint32_t" in network |
| * byte order. This list is terminated by an "(uint32_t)0". |
| * Immediately after the terminating 0 follow the images, one by |
| * one, all aligned on "uint32_t" boundaries (size rounded up to |
| * a multiple of 4 bytes - except for the last file). |
| * |
| * "Firmware Images" are binary images containing firmware (like |
| * U-Boot or FPGA images) which usually will be programmed to |
| * flash memory. |
| * |
| * "Script files" are command sequences that will be executed by |
| * U-Boot's command interpreter; this feature is especially |
| * useful when you configure U-Boot to use a real shell (hush) |
| * as command interpreter (=> Shell Scripts). |
| * |
| * The following are exposed to uImage header. |
| * New IDs *MUST* be appended at the end of the list and *NEVER* |
| * inserted for backward compatibility. |
| */ |
| |
| enum { |
| IH_TYPE_INVALID = 0, /* Invalid Image */ |
| IH_TYPE_STANDALONE, /* Standalone Program */ |
| IH_TYPE_KERNEL, /* OS Kernel Image */ |
| IH_TYPE_RAMDISK, /* RAMDisk Image */ |
| IH_TYPE_MULTI, /* Multi-File Image */ |
| IH_TYPE_FIRMWARE, /* Firmware Image */ |
| IH_TYPE_SCRIPT, /* Script file */ |
| IH_TYPE_FILESYSTEM, /* Filesystem Image (any type) */ |
| IH_TYPE_FLATDT, /* Binary Flat Device Tree Blob */ |
| IH_TYPE_KWBIMAGE, /* Kirkwood Boot Image */ |
| IH_TYPE_IMXIMAGE, /* Freescale IMXBoot Image */ |
| IH_TYPE_UBLIMAGE, /* Davinci UBL Image */ |
| IH_TYPE_OMAPIMAGE, /* TI OMAP Config Header Image */ |
| IH_TYPE_AISIMAGE, /* TI Davinci AIS Image */ |
| /* OS Kernel Image, can run from any load address */ |
| IH_TYPE_KERNEL_NOLOAD, |
| IH_TYPE_PBLIMAGE, /* Freescale PBL Boot Image */ |
| IH_TYPE_MXSIMAGE, /* Freescale MXSBoot Image */ |
| IH_TYPE_GPIMAGE, /* TI Keystone GPHeader Image */ |
| IH_TYPE_ATMELIMAGE, /* ATMEL ROM bootable Image */ |
| IH_TYPE_SOCFPGAIMAGE, /* Altera SOCFPGA CV/AV Preloader */ |
| IH_TYPE_X86_SETUP, /* x86 setup.bin Image */ |
| IH_TYPE_LPC32XXIMAGE, /* x86 setup.bin Image */ |
| IH_TYPE_LOADABLE, /* A list of typeless images */ |
| IH_TYPE_RKIMAGE, /* Rockchip Boot Image */ |
| IH_TYPE_RKSD, /* Rockchip SD card */ |
| IH_TYPE_RKSPI, /* Rockchip SPI image */ |
| IH_TYPE_ZYNQIMAGE, /* Xilinx Zynq Boot Image */ |
| IH_TYPE_ZYNQMPIMAGE, /* Xilinx ZynqMP Boot Image */ |
| IH_TYPE_ZYNQMPBIF, /* Xilinx ZynqMP Boot Image (bif) */ |
| IH_TYPE_FPGA, /* FPGA Image */ |
| IH_TYPE_VYBRIDIMAGE, /* VYBRID .vyb Image */ |
| IH_TYPE_TEE, /* Trusted Execution Environment OS Image */ |
| IH_TYPE_FIRMWARE_IVT, /* Firmware Image with HABv4 IVT */ |
| IH_TYPE_PMMC, /* TI Power Management Micro-Controller Firmware */ |
| IH_TYPE_STM32IMAGE, /* STMicroelectronics STM32 Image */ |
| IH_TYPE_SOCFPGAIMAGE_V1, /* Altera SOCFPGA A10 Preloader */ |
| IH_TYPE_MTKIMAGE, /* MediaTek BootROM loadable Image */ |
| IH_TYPE_IMX8MIMAGE, /* Freescale IMX8MBoot Image */ |
| IH_TYPE_IMX8IMAGE, /* Freescale IMX8Boot Image */ |
| |
| IH_TYPE_COUNT, /* Number of image types */ |
| }; |
| |
| /* |
| * Compression Types |
| * |
| * The following are exposed to uImage header. |
| * New IDs *MUST* be appended at the end of the list and *NEVER* |
| * inserted for backward compatibility. |
| */ |
| enum { |
| IH_COMP_NONE = 0, /* No Compression Used */ |
| IH_COMP_GZIP, /* gzip Compression Used */ |
| IH_COMP_BZIP2, /* bzip2 Compression Used */ |
| IH_COMP_LZMA, /* lzma Compression Used */ |
| IH_COMP_LZO, /* lzo Compression Used */ |
| IH_COMP_LZ4, /* lz4 Compression Used */ |
| |
| IH_COMP_COUNT, |
| }; |
| |
| #define IH_MAGIC 0x27051956 /* Image Magic Number */ |
| #define IH_NMLEN 32 /* Image Name Length */ |
| |
| /* Reused from common.h */ |
| #define ROUND(a, b) (((a) + (b) - 1) & ~((b) - 1)) |
| |
| /* |
| * Legacy format image header, |
| * all data in network byte order (aka natural aka bigendian). |
| */ |
| typedef struct image_header { |
| __be32 ih_magic; /* Image Header Magic Number */ |
| __be32 ih_hcrc; /* Image Header CRC Checksum */ |
| __be32 ih_time; /* Image Creation Timestamp */ |
| __be32 ih_size; /* Image Data Size */ |
| __be32 ih_load; /* Data Load Address */ |
| __be32 ih_ep; /* Entry Point Address */ |
| __be32 ih_dcrc; /* Image Data CRC Checksum */ |
| uint8_t ih_os; /* Operating System */ |
| uint8_t ih_arch; /* CPU architecture */ |
| uint8_t ih_type; /* Image Type */ |
| uint8_t ih_comp; /* Compression Type */ |
| uint8_t ih_name[IH_NMLEN]; /* Image Name */ |
| } image_header_t; |
| |
| typedef struct image_info { |
| ulong start, end; /* start/end of blob */ |
| ulong image_start, image_len; /* start of image within blob, len of image */ |
| ulong load; /* load addr for the image */ |
| uint8_t comp, type, os; /* compression, type of image, os type */ |
| uint8_t arch; /* CPU architecture */ |
| } image_info_t; |
| |
| /* |
| * Legacy and FIT format headers used by do_bootm() and do_bootm_<os>() |
| * routines. |
| */ |
| typedef struct bootm_headers { |
| /* |
| * Legacy os image header, if it is a multi component image |
| * then boot_get_ramdisk() and get_fdt() will attempt to get |
| * data from second and third component accordingly. |
| */ |
| image_header_t *legacy_hdr_os; /* image header pointer */ |
| image_header_t legacy_hdr_os_copy; /* header copy */ |
| ulong legacy_hdr_valid; |
| |
| #if IMAGE_ENABLE_FIT |
| const char *fit_uname_cfg; /* configuration node unit name */ |
| |
| void *fit_hdr_os; /* os FIT image header */ |
| const char *fit_uname_os; /* os subimage node unit name */ |
| int fit_noffset_os; /* os subimage node offset */ |
| |
| void *fit_hdr_rd; /* init ramdisk FIT image header */ |
| const char *fit_uname_rd; /* init ramdisk subimage node unit name */ |
| int fit_noffset_rd; /* init ramdisk subimage node offset */ |
| |
| void *fit_hdr_fdt; /* FDT blob FIT image header */ |
| const char *fit_uname_fdt; /* FDT blob subimage node unit name */ |
| int fit_noffset_fdt;/* FDT blob subimage node offset */ |
| |
| void *fit_hdr_setup; /* x86 setup FIT image header */ |
| const char *fit_uname_setup; /* x86 setup subimage node name */ |
| int fit_noffset_setup;/* x86 setup subimage node offset */ |
| #endif |
| |
| #ifndef USE_HOSTCC |
| image_info_t os; /* os image info */ |
| ulong ep; /* entry point of OS */ |
| |
| ulong rd_start, rd_end;/* ramdisk start/end */ |
| |
| char *ft_addr; /* flat dev tree address */ |
| ulong ft_len; /* length of flat device tree */ |
| |
| ulong initrd_start; |
| ulong initrd_end; |
| ulong cmdline_start; |
| ulong cmdline_end; |
| bd_t *kbd; |
| #endif |
| |
| int verify; /* env_get("verify")[0] != 'n' */ |
| |
| #define BOOTM_STATE_START (0x00000001) |
| #define BOOTM_STATE_FINDOS (0x00000002) |
| #define BOOTM_STATE_FINDOTHER (0x00000004) |
| #define BOOTM_STATE_LOADOS (0x00000008) |
| #define BOOTM_STATE_RAMDISK (0x00000010) |
| #define BOOTM_STATE_FDT (0x00000020) |
| #define BOOTM_STATE_OS_CMDLINE (0x00000040) |
| #define BOOTM_STATE_OS_BD_T (0x00000080) |
| #define BOOTM_STATE_OS_PREP (0x00000100) |
| #define BOOTM_STATE_OS_FAKE_GO (0x00000200) /* 'Almost' run the OS */ |
| #define BOOTM_STATE_OS_GO (0x00000400) |
| int state; |
| |
| #ifdef CONFIG_LMB |
| struct lmb lmb; /* for memory mgmt */ |
| #endif |
| } bootm_headers_t; |
| |
| extern bootm_headers_t images; |
| |
| /* |
| * Some systems (for example LWMON) have very short watchdog periods; |
| * we must make sure to split long operations like memmove() or |
| * checksum calculations into reasonable chunks. |
| */ |
| #ifndef CHUNKSZ |
| #define CHUNKSZ (64 * 1024) |
| #endif |
| |
| #ifndef CHUNKSZ_CRC32 |
| #define CHUNKSZ_CRC32 (64 * 1024) |
| #endif |
| |
| #ifndef CHUNKSZ_MD5 |
| #define CHUNKSZ_MD5 (64 * 1024) |
| #endif |
| |
| #ifndef CHUNKSZ_SHA1 |
| #define CHUNKSZ_SHA1 (64 * 1024) |
| #endif |
| |
| #define uimage_to_cpu(x) be32_to_cpu(x) |
| #define cpu_to_uimage(x) cpu_to_be32(x) |
| |
| /* |
| * Translation table for entries of a specific type; used by |
| * get_table_entry_id() and get_table_entry_name(). |
| */ |
| typedef struct table_entry { |
| int id; |
| char *sname; /* short (input) name to find table entry */ |
| char *lname; /* long (output) name to print for messages */ |
| } table_entry_t; |
| |
| /* |
| * get_table_entry_id() scans the translation table trying to find an |
| * entry that matches the given short name. If a matching entry is |
| * found, it's id is returned to the caller. |
| */ |
| int get_table_entry_id(const table_entry_t *table, |
| const char *table_name, const char *name); |
| /* |
| * get_table_entry_name() scans the translation table trying to find |
| * an entry that matches the given id. If a matching entry is found, |
| * its long name is returned to the caller. |
| */ |
| char *get_table_entry_name(const table_entry_t *table, char *msg, int id); |
| |
| const char *genimg_get_os_name(uint8_t os); |
| |
| /** |
| * genimg_get_os_short_name() - get the short name for an OS |
| * |
| * @param os OS (IH_OS_...) |
| * @return OS short name, or "unknown" if unknown |
| */ |
| const char *genimg_get_os_short_name(uint8_t comp); |
| |
| const char *genimg_get_arch_name(uint8_t arch); |
| |
| /** |
| * genimg_get_arch_short_name() - get the short name for an architecture |
| * |
| * @param arch Architecture type (IH_ARCH_...) |
| * @return architecture short name, or "unknown" if unknown |
| */ |
| const char *genimg_get_arch_short_name(uint8_t arch); |
| |
| const char *genimg_get_type_name(uint8_t type); |
| |
| /** |
| * genimg_get_type_short_name() - get the short name for an image type |
| * |
| * @param type Image type (IH_TYPE_...) |
| * @return image short name, or "unknown" if unknown |
| */ |
| const char *genimg_get_type_short_name(uint8_t type); |
| |
| const char *genimg_get_comp_name(uint8_t comp); |
| |
| /** |
| * genimg_get_comp_short_name() - get the short name for a compression method |
| * |
| * @param comp compression method (IH_COMP_...) |
| * @return compression method short name, or "unknown" if unknown |
| */ |
| const char *genimg_get_comp_short_name(uint8_t comp); |
| |
| /** |
| * genimg_get_cat_name() - Get the name of an item in a category |
| * |
| * @category: Category of item |
| * @id: Item ID |
| * @return name of item, or "Unknown ..." if unknown |
| */ |
| const char *genimg_get_cat_name(enum ih_category category, uint id); |
| |
| /** |
| * genimg_get_cat_short_name() - Get the short name of an item in a category |
| * |
| * @category: Category of item |
| * @id: Item ID |
| * @return short name of item, or "Unknown ..." if unknown |
| */ |
| const char *genimg_get_cat_short_name(enum ih_category category, uint id); |
| |
| /** |
| * genimg_get_cat_count() - Get the number of items in a category |
| * |
| * @category: Category to check |
| * @return the number of items in the category (IH_xxx_COUNT) |
| */ |
| int genimg_get_cat_count(enum ih_category category); |
| |
| /** |
| * genimg_get_cat_desc() - Get the description of a category |
| * |
| * @return the description of a category, e.g. "architecture". This |
| * effectively converts the enum to a string. |
| */ |
| const char *genimg_get_cat_desc(enum ih_category category); |
| |
| int genimg_get_os_id(const char *name); |
| int genimg_get_arch_id(const char *name); |
| int genimg_get_type_id(const char *name); |
| int genimg_get_comp_id(const char *name); |
| void genimg_print_size(uint32_t size); |
| |
| #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || \ |
| defined(USE_HOSTCC) |
| #define IMAGE_ENABLE_TIMESTAMP 1 |
| #else |
| #define IMAGE_ENABLE_TIMESTAMP 0 |
| #endif |
| void genimg_print_time(time_t timestamp); |
| |
| /* What to do with a image load address ('load = <> 'in the FIT) */ |
| enum fit_load_op { |
| FIT_LOAD_IGNORED, /* Ignore load address */ |
| FIT_LOAD_OPTIONAL, /* Can be provided, but optional */ |
| FIT_LOAD_OPTIONAL_NON_ZERO, /* Optional, a value of 0 is ignored */ |
| FIT_LOAD_REQUIRED, /* Must be provided */ |
| }; |
| |
| int boot_get_setup(bootm_headers_t *images, uint8_t arch, ulong *setup_start, |
| ulong *setup_len); |
| |
| #ifndef USE_HOSTCC |
| /* Image format types, returned by _get_format() routine */ |
| #define IMAGE_FORMAT_INVALID 0x00 |
| #if defined(CONFIG_IMAGE_FORMAT_LEGACY) |
| #define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */ |
| #endif |
| #define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */ |
| #define IMAGE_FORMAT_ANDROID 0x03 /* Android boot image */ |
| |
| ulong genimg_get_kernel_addr_fit(char * const img_addr, |
| const char **fit_uname_config, |
| const char **fit_uname_kernel); |
| ulong genimg_get_kernel_addr(char * const img_addr); |
| int genimg_get_format(const void *img_addr); |
| int genimg_has_config(bootm_headers_t *images); |
| |
| int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images, |
| uint8_t arch, const ulong *ld_start, ulong * const ld_len); |
| int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, |
| uint8_t arch, ulong *rd_start, ulong *rd_end); |
| |
| /** |
| * boot_get_loadable - routine to load a list of binaries to memory |
| * @argc: Ignored Argument |
| * @argv: Ignored Argument |
| * @images: pointer to the bootm images structure |
| * @arch: expected architecture for the image |
| * @ld_start: Ignored Argument |
| * @ld_len: Ignored Argument |
| * |
| * boot_get_loadable() will take the given FIT configuration, and look |
| * for a field named "loadables". Loadables, is a list of elements in |
| * the FIT given as strings. exe: |
| * loadables = "linux_kernel", "fdt-2"; |
| * this function will attempt to parse each string, and load the |
| * corresponding element from the FIT into memory. Once placed, |
| * no aditional actions are taken. |
| * |
| * @return: |
| * 0, if only valid images or no images are found |
| * error code, if an error occurs during fit_image_load |
| */ |
| int boot_get_loadable(int argc, char * const argv[], bootm_headers_t *images, |
| uint8_t arch, const ulong *ld_start, ulong * const ld_len); |
| #endif /* !USE_HOSTCC */ |
| |
| int boot_get_setup_fit(bootm_headers_t *images, uint8_t arch, |
| ulong *setup_start, ulong *setup_len); |
| |
| /** |
| * boot_get_fdt_fit() - load a DTB from a FIT file (applying overlays) |
| * |
| * This deals with all aspects of loading an DTB from a FIT. |
| * The correct base image based on configuration will be selected, and |
| * then any overlays specified will be applied (as present in fit_uname_configp). |
| * |
| * @param images Boot images structure |
| * @param addr Address of FIT in memory |
| * @param fit_unamep On entry this is the requested image name |
| * (e.g. "kernel") or NULL to use the default. On exit |
| * points to the selected image name |
| * @param fit_uname_configp On entry this is the requested configuration |
| * name (e.g. "conf-1") or NULL to use the default. On |
| * exit points to the selected configuration name. |
| * @param arch Expected architecture (IH_ARCH_...) |
| * @param datap Returns address of loaded image |
| * @param lenp Returns length of loaded image |
| * |
| * @return node offset of base image, or -ve error code on error |
| */ |
| int boot_get_fdt_fit(bootm_headers_t *images, ulong addr, |
| const char **fit_unamep, const char **fit_uname_configp, |
| int arch, ulong *datap, ulong *lenp); |
| |
| /** |
| * fit_image_load() - load an image from a FIT |
| * |
| * This deals with all aspects of loading an image from a FIT, including |
| * selecting the right image based on configuration, verifying it, printing |
| * out progress messages, checking the type/arch/os and optionally copying it |
| * to the right load address. |
| * |
| * The property to look up is defined by image_type. |
| * |
| * @param images Boot images structure |
| * @param addr Address of FIT in memory |
| * @param fit_unamep On entry this is the requested image name |
| * (e.g. "kernel") or NULL to use the default. On exit |
| * points to the selected image name |
| * @param fit_uname_configp On entry this is the requested configuration |
| * name (e.g. "conf-1") or NULL to use the default. On |
| * exit points to the selected configuration name. |
| * @param arch Expected architecture (IH_ARCH_...) |
| * @param image_type Required image type (IH_TYPE_...). If this is |
| * IH_TYPE_KERNEL then we allow IH_TYPE_KERNEL_NOLOAD |
| * also. |
| * @param bootstage_id ID of starting bootstage to use for progress updates. |
| * This will be added to the BOOTSTAGE_SUB values when |
| * calling bootstage_mark() |
| * @param load_op Decribes what to do with the load address |
| * @param datap Returns address of loaded image |
| * @param lenp Returns length of loaded image |
| * @return node offset of image, or -ve error code on error |
| */ |
| int fit_image_load(bootm_headers_t *images, ulong addr, |
| const char **fit_unamep, const char **fit_uname_configp, |
| int arch, int image_type, int bootstage_id, |
| enum fit_load_op load_op, ulong *datap, ulong *lenp); |
| |
| #ifndef USE_HOSTCC |
| /** |
| * fit_get_node_from_config() - Look up an image a FIT by type |
| * |
| * This looks in the selected conf- node (images->fit_uname_cfg) for a |
| * particular image type (e.g. "kernel") and then finds the image that is |
| * referred to. |
| * |
| * For example, for something like: |
| * |
| * images { |
| * kernel { |
| * ... |
| * }; |
| * }; |
| * configurations { |
| * conf-1 { |
| * kernel = "kernel"; |
| * }; |
| * }; |
| * |
| * the function will return the node offset of the kernel@1 node, assuming |
| * that conf-1 is the chosen configuration. |
| * |
| * @param images Boot images structure |
| * @param prop_name Property name to look up (FIT_..._PROP) |
| * @param addr Address of FIT in memory |
| */ |
| int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name, |
| ulong addr); |
| |
| int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch, |
| bootm_headers_t *images, |
| char **of_flat_tree, ulong *of_size); |
| void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob); |
| int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size); |
| |
| int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len, |
| ulong *initrd_start, ulong *initrd_end); |
| int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end); |
| #ifdef CONFIG_SYS_BOOT_GET_KBD |
| int boot_get_kbd(struct lmb *lmb, bd_t **kbd); |
| #endif /* CONFIG_SYS_BOOT_GET_KBD */ |
| #endif /* !USE_HOSTCC */ |
| |
| /*******************************************************************/ |
| /* Legacy format specific code (prefixed with image_) */ |
| /*******************************************************************/ |
| static inline uint32_t image_get_header_size(void) |
| { |
| return (sizeof(image_header_t)); |
| } |
| |
| #define image_get_hdr_l(f) \ |
| static inline uint32_t image_get_##f(const image_header_t *hdr) \ |
| { \ |
| return uimage_to_cpu(hdr->ih_##f); \ |
| } |
| image_get_hdr_l(magic) /* image_get_magic */ |
| image_get_hdr_l(hcrc) /* image_get_hcrc */ |
| image_get_hdr_l(time) /* image_get_time */ |
| image_get_hdr_l(size) /* image_get_size */ |
| image_get_hdr_l(load) /* image_get_load */ |
| image_get_hdr_l(ep) /* image_get_ep */ |
| image_get_hdr_l(dcrc) /* image_get_dcrc */ |
| |
| #define image_get_hdr_b(f) \ |
| static inline uint8_t image_get_##f(const image_header_t *hdr) \ |
| { \ |
| return hdr->ih_##f; \ |
| } |
| image_get_hdr_b(os) /* image_get_os */ |
| image_get_hdr_b(arch) /* image_get_arch */ |
| image_get_hdr_b(type) /* image_get_type */ |
| image_get_hdr_b(comp) /* image_get_comp */ |
| |
| static inline char *image_get_name(const image_header_t *hdr) |
| { |
| return (char *)hdr->ih_name; |
| } |
| |
| static inline uint32_t image_get_data_size(const image_header_t *hdr) |
| { |
| return image_get_size(hdr); |
| } |
| |
| /** |
| * image_get_data - get image payload start address |
| * @hdr: image header |
| * |
| * image_get_data() returns address of the image payload. For single |
| * component images it is image data start. For multi component |
| * images it points to the null terminated table of sub-images sizes. |
| * |
| * returns: |
| * image payload data start address |
| */ |
| static inline ulong image_get_data(const image_header_t *hdr) |
| { |
| return ((ulong)hdr + image_get_header_size()); |
| } |
| |
| static inline uint32_t image_get_image_size(const image_header_t *hdr) |
| { |
| return (image_get_size(hdr) + image_get_header_size()); |
| } |
| static inline ulong image_get_image_end(const image_header_t *hdr) |
| { |
| return ((ulong)hdr + image_get_image_size(hdr)); |
| } |
| |
| #define image_set_hdr_l(f) \ |
| static inline void image_set_##f(image_header_t *hdr, uint32_t val) \ |
| { \ |
| hdr->ih_##f = cpu_to_uimage(val); \ |
| } |
| image_set_hdr_l(magic) /* image_set_magic */ |
| image_set_hdr_l(hcrc) /* image_set_hcrc */ |
| image_set_hdr_l(time) /* image_set_time */ |
| image_set_hdr_l(size) /* image_set_size */ |
| image_set_hdr_l(load) /* image_set_load */ |
| image_set_hdr_l(ep) /* image_set_ep */ |
| image_set_hdr_l(dcrc) /* image_set_dcrc */ |
| |
| #define image_set_hdr_b(f) \ |
| static inline void image_set_##f(image_header_t *hdr, uint8_t val) \ |
| { \ |
| hdr->ih_##f = val; \ |
| } |
| image_set_hdr_b(os) /* image_set_os */ |
| image_set_hdr_b(arch) /* image_set_arch */ |
| image_set_hdr_b(type) /* image_set_type */ |
| image_set_hdr_b(comp) /* image_set_comp */ |
| |
| static inline void image_set_name(image_header_t *hdr, const char *name) |
| { |
| strncpy(image_get_name(hdr), name, IH_NMLEN); |
| } |
| |
| int image_check_hcrc(const image_header_t *hdr); |
| int image_check_dcrc(const image_header_t *hdr); |
| #ifndef USE_HOSTCC |
| ulong env_get_bootm_low(void); |
| phys_size_t env_get_bootm_size(void); |
| phys_size_t env_get_bootm_mapsize(void); |
| #endif |
| void memmove_wd(void *to, void *from, size_t len, ulong chunksz); |
| |
| static inline int image_check_magic(const image_header_t *hdr) |
| { |
| return (image_get_magic(hdr) == IH_MAGIC); |
| } |
| static inline int image_check_type(const image_header_t *hdr, uint8_t type) |
| { |
| return (image_get_type(hdr) == type); |
| } |
| static inline int image_check_arch(const image_header_t *hdr, uint8_t arch) |
| { |
| return (image_get_arch(hdr) == arch) || |
| (image_get_arch(hdr) == IH_ARCH_ARM && arch == IH_ARCH_ARM64); |
| } |
| static inline int image_check_os(const image_header_t *hdr, uint8_t os) |
| { |
| return (image_get_os(hdr) == os); |
| } |
| |
| ulong image_multi_count(const image_header_t *hdr); |
| void image_multi_getimg(const image_header_t *hdr, ulong idx, |
| ulong *data, ulong *len); |
| |
| void image_print_contents(const void *hdr); |
| |
| #ifndef USE_HOSTCC |
| static inline int image_check_target_arch(const image_header_t *hdr) |
| { |
| #ifndef IH_ARCH_DEFAULT |
| # error "please define IH_ARCH_DEFAULT in your arch asm/u-boot.h" |
| #endif |
| return image_check_arch(hdr, IH_ARCH_DEFAULT); |
| } |
| #endif /* USE_HOSTCC */ |
| |
| /** |
| * Set up properties in the FDT |
| * |
| * This sets up properties in the FDT that is to be passed to linux. |
| * |
| * @images: Images information |
| * @blob: FDT to update |
| * @of_size: Size of the FDT |
| * @lmb: Points to logical memory block structure |
| * @return 0 if ok, <0 on failure |
| */ |
| int image_setup_libfdt(bootm_headers_t *images, void *blob, |
| int of_size, struct lmb *lmb); |
| |
| /** |
| * Set up the FDT to use for booting a kernel |
| * |
| * This performs ramdisk setup, sets up the FDT if required, and adds |
| * paramters to the FDT if libfdt is available. |
| * |
| * @param images Images information |
| * @return 0 if ok, <0 on failure |
| */ |
| int image_setup_linux(bootm_headers_t *images); |
| |
| /** |
| * bootz_setup() - Extract stat and size of a Linux xImage |
| * |
| * @image: Address of image |
| * @start: Returns start address of image |
| * @end : Returns end address of image |
| * @return 0 if OK, 1 if the image was not recognised |
| */ |
| int bootz_setup(ulong image, ulong *start, ulong *end); |
| |
| /** |
| * Return the correct start address and size of a Linux aarch64 Image. |
| * |
| * @image: Address of image |
| * @start: Returns start address of image |
| * @size : Returns size image |
| * @force_reloc: Ignore image->ep field, always place image to RAM start |
| * @return 0 if OK, 1 if the image was not recognised |
| */ |
| int booti_setup(ulong image, ulong *relocated_addr, ulong *size, |
| bool force_reloc); |
| |
| /*******************************************************************/ |
| /* New uImage format specific code (prefixed with fit_) */ |
| /*******************************************************************/ |
| |
| #define FIT_IMAGES_PATH "/images" |
| #define FIT_CONFS_PATH "/configurations" |
| |
| /* hash/signature node */ |
| #define FIT_HASH_NODENAME "hash" |
| #define FIT_ALGO_PROP "algo" |
| #define FIT_VALUE_PROP "value" |
| #define FIT_IGNORE_PROP "uboot-ignore" |
| #define FIT_SIG_NODENAME "signature" |
| |
| /* image node */ |
| #define FIT_DATA_PROP "data" |
| #define FIT_DATA_POSITION_PROP "data-position" |
| #define FIT_DATA_OFFSET_PROP "data-offset" |
| #define FIT_DATA_SIZE_PROP "data-size" |
| #define FIT_TIMESTAMP_PROP "timestamp" |
| #define FIT_DESC_PROP "description" |
| #define FIT_ARCH_PROP "arch" |
| #define FIT_TYPE_PROP "type" |
| #define FIT_OS_PROP "os" |
| #define FIT_COMP_PROP "compression" |
| #define FIT_ENTRY_PROP "entry" |
| #define FIT_LOAD_PROP "load" |
| |
| /* configuration node */ |
| #define FIT_KERNEL_PROP "kernel" |
| #define FIT_RAMDISK_PROP "ramdisk" |
| #define FIT_FDT_PROP "fdt" |
| #define FIT_LOADABLE_PROP "loadables" |
| #define FIT_DEFAULT_PROP "default" |
| #define FIT_SETUP_PROP "setup" |
| #define FIT_FPGA_PROP "fpga" |
| #define FIT_FIRMWARE_PROP "firmware" |
| #define FIT_STANDALONE_PROP "standalone" |
| |
| #define FIT_MAX_HASH_LEN HASH_MAX_DIGEST_SIZE |
| |
| #if IMAGE_ENABLE_FIT |
| /* cmdline argument format parsing */ |
| int fit_parse_conf(const char *spec, ulong addr_curr, |
| ulong *addr, const char **conf_name); |
| int fit_parse_subimage(const char *spec, ulong addr_curr, |
| ulong *addr, const char **image_name); |
| |
| int fit_get_subimage_count(const void *fit, int images_noffset); |
| void fit_print_contents(const void *fit); |
| void fit_image_print(const void *fit, int noffset, const char *p); |
| |
| /** |
| * fit_get_end - get FIT image size |
| * @fit: pointer to the FIT format image header |
| * |
| * returns: |
| * size of the FIT image (blob) in memory |
| */ |
| static inline ulong fit_get_size(const void *fit) |
| { |
| return fdt_totalsize(fit); |
| } |
| |
| /** |
| * fit_get_end - get FIT image end |
| * @fit: pointer to the FIT format image header |
| * |
| * returns: |
| * end address of the FIT image (blob) in memory |
| */ |
| ulong fit_get_end(const void *fit); |
| |
| /** |
| * fit_get_name - get FIT node name |
| * @fit: pointer to the FIT format image header |
| * |
| * returns: |
| * NULL, on error |
| * pointer to node name, on success |
| */ |
| static inline const char *fit_get_name(const void *fit_hdr, |
| int noffset, int *len) |
| { |
| return fdt_get_name(fit_hdr, noffset, len); |
| } |
| |
| int fit_get_desc(const void *fit, int noffset, char **desc); |
| int fit_get_timestamp(const void *fit, int noffset, time_t *timestamp); |
| |
| int fit_image_get_node(const void *fit, const char *image_uname); |
| int fit_image_get_os(const void *fit, int noffset, uint8_t *os); |
| int fit_image_get_arch(const void *fit, int noffset, uint8_t *arch); |
| int fit_image_get_type(const void *fit, int noffset, uint8_t *type); |
| int fit_image_get_comp(const void *fit, int noffset, uint8_t *comp); |
| int fit_image_get_load(const void *fit, int noffset, ulong *load); |
| int fit_image_get_entry(const void *fit, int noffset, ulong *entry); |
| int fit_image_get_data(const void *fit, int noffset, |
| const void **data, size_t *size); |
| int fit_image_get_data_offset(const void *fit, int noffset, int *data_offset); |
| int fit_image_get_data_position(const void *fit, int noffset, |
| int *data_position); |
| int fit_image_get_data_size(const void *fit, int noffset, int *data_size); |
| int fit_image_get_data_and_size(const void *fit, int noffset, |
| const void **data, size_t *size); |
| |
| int fit_image_hash_get_algo(const void *fit, int noffset, char **algo); |
| int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value, |
| int *value_len); |
| |
| int fit_set_timestamp(void *fit, int noffset, time_t timestamp); |
| |
| /** |
| * fit_add_verification_data() - add verification data to FIT image nodes |
| * |
| * @keydir: Directory containing keys |
| * @kwydest: FDT blob to write public key information to |
| * @fit: Pointer to the FIT format image header |
| * @comment: Comment to add to signature nodes |
| * @require_keys: Mark all keys as 'required' |
| * @engine_id: Engine to use for signing |
| * @cmdname: Command name used when reporting errors |
| * |
| * Adds hash values for all component images in the FIT blob. |
| * Hashes are calculated for all component images which have hash subnodes |
| * with algorithm property set to one of the supported hash algorithms. |
| * |
| * Also add signatures if signature nodes are present. |
| * |
| * returns |
| * 0, on success |
| * libfdt error code, on failure |
| */ |
| int fit_add_verification_data(const char *keydir, void *keydest, void *fit, |
| const char *comment, int require_keys, |
| const char *engine_id, const char *cmdname); |
| |
| int fit_image_verify_with_data(const void *fit, int image_noffset, |
| const void *data, size_t size); |
| int fit_image_verify(const void *fit, int noffset); |
| int fit_config_verify(const void *fit, int conf_noffset); |
| int fit_all_image_verify(const void *fit); |
| int fit_image_check_os(const void *fit, int noffset, uint8_t os); |
| int fit_image_check_arch(const void *fit, int noffset, uint8_t arch); |
| int fit_image_check_type(const void *fit, int noffset, uint8_t type); |
| int fit_image_check_comp(const void *fit, int noffset, uint8_t comp); |
| int fit_check_format(const void *fit); |
| |
| int fit_conf_find_compat(const void *fit, const void *fdt); |
| int fit_conf_get_node(const void *fit, const char *conf_uname); |
| |
| /** |
| * fit_conf_get_prop_node() - Get node refered to by a configuration |
| * @fit: FIT to check |
| * @noffset: Offset of conf@xxx node to check |
| * @prop_name: Property to read from the conf node |
| * |
| * The conf- nodes contain references to other nodes, using properties |
| * like 'kernel = "kernel"'. Given such a property name (e.g. "kernel"), |
| * return the offset of the node referred to (e.g. offset of node |
| * "/images/kernel". |
| */ |
| int fit_conf_get_prop_node(const void *fit, int noffset, |
| const char *prop_name); |
| |
| int fit_check_ramdisk(const void *fit, int os_noffset, |
| uint8_t arch, int verify); |
| |
| int calculate_hash(const void *data, int data_len, const char *algo, |
| uint8_t *value, int *value_len); |
| |
| /* |
| * At present we only support signing on the host, and verification on the |
| * device |
| */ |
| #if defined(CONFIG_FIT_SIGNATURE) |
| # ifdef USE_HOSTCC |
| # define IMAGE_ENABLE_SIGN 1 |
| # define IMAGE_ENABLE_VERIFY 1 |
| # include <openssl/evp.h> |
| #else |
| # define IMAGE_ENABLE_SIGN 0 |
| # define IMAGE_ENABLE_VERIFY 1 |
| # endif |
| #else |
| # define IMAGE_ENABLE_SIGN 0 |
| # define IMAGE_ENABLE_VERIFY 0 |
| #endif |
| |
| #ifdef USE_HOSTCC |
| void *image_get_host_blob(void); |
| void image_set_host_blob(void *host_blob); |
| # define gd_fdt_blob() image_get_host_blob() |
| #else |
| # define gd_fdt_blob() (gd->fdt_blob) |
| #endif |
| |
| #ifdef CONFIG_FIT_BEST_MATCH |
| #define IMAGE_ENABLE_BEST_MATCH 1 |
| #else |
| #define IMAGE_ENABLE_BEST_MATCH 0 |
| #endif |
| |
| /* Information passed to the signing routines */ |
| struct image_sign_info { |
| const char *keydir; /* Directory conaining keys */ |
| const char *keyname; /* Name of key to use */ |
| void *fit; /* Pointer to FIT blob */ |
| int node_offset; /* Offset of signature node */ |
| const char *name; /* Algorithm name */ |
| struct checksum_algo *checksum; /* Checksum algorithm information */ |
| struct padding_algo *padding; /* Padding algorithm information */ |
| struct crypto_algo *crypto; /* Crypto algorithm information */ |
| const void *fdt_blob; /* FDT containing public keys */ |
| int required_keynode; /* Node offset of key to use: -1=any */ |
| const char *require_keys; /* Value for 'required' property */ |
| const char *engine_id; /* Engine to use for signing */ |
| }; |
| #endif /* Allow struct image_region to always be defined for rsa.h */ |
| |
| /* A part of an image, used for hashing */ |
| struct image_region { |
| const void *data; |
| int size; |
| }; |
| |
| #if IMAGE_ENABLE_FIT |
| |
| #if IMAGE_ENABLE_VERIFY |
| # include <u-boot/rsa-checksum.h> |
| #endif |
| struct checksum_algo { |
| const char *name; |
| const int checksum_len; |
| const int der_len; |
| const uint8_t *der_prefix; |
| #if IMAGE_ENABLE_SIGN |
| const EVP_MD *(*calculate_sign)(void); |
| #endif |
| int (*calculate)(const char *name, |
| const struct image_region region[], |
| int region_count, uint8_t *checksum); |
| }; |
| |
| struct crypto_algo { |
| const char *name; /* Name of algorithm */ |
| const int key_len; |
| |
| /** |
| * sign() - calculate and return signature for given input data |
| * |
| * @info: Specifies key and FIT information |
| * @data: Pointer to the input data |
| * @data_len: Data length |
| * @sigp: Set to an allocated buffer holding the signature |
| * @sig_len: Set to length of the calculated hash |
| * |
| * This computes input data signature according to selected algorithm. |
| * Resulting signature value is placed in an allocated buffer, the |
| * pointer is returned as *sigp. The length of the calculated |
| * signature is returned via the sig_len pointer argument. The caller |
| * should free *sigp. |
| * |
| * @return: 0, on success, -ve on error |
| */ |
| int (*sign)(struct image_sign_info *info, |
| const struct image_region region[], |
| int region_count, uint8_t **sigp, uint *sig_len); |
| |
| /** |
| * add_verify_data() - Add verification information to FDT |
| * |
| * Add public key information to the FDT node, suitable for |
| * verification at run-time. The information added depends on the |
| * algorithm being used. |
| * |
| * @info: Specifies key and FIT information |
| * @keydest: Destination FDT blob for public key data |
| * @return: 0, on success, -ve on error |
| */ |
| int (*add_verify_data)(struct image_sign_info *info, void *keydest); |
| |
| /** |
| * verify() - Verify a signature against some data |
| * |
| * @info: Specifies key and FIT information |
| * @data: Pointer to the input data |
| * @data_len: Data length |
| * @sig: Signature |
| * @sig_len: Number of bytes in signature |
| * @return 0 if verified, -ve on error |
| */ |
| int (*verify)(struct image_sign_info *info, |
| const struct image_region region[], int region_count, |
| uint8_t *sig, uint sig_len); |
| }; |
| |
| struct padding_algo { |
| const char *name; |
| int (*verify)(struct image_sign_info *info, |
| uint8_t *pad, int pad_len, |
| const uint8_t *hash, int hash_len); |
| }; |
| |
| /** |
| * image_get_checksum_algo() - Look up a checksum algorithm |
| * |
| * @param full_name Name of algorithm in the form "checksum,crypto" |
| * @return pointer to algorithm information, or NULL if not found |
| */ |
| struct checksum_algo *image_get_checksum_algo(const char *full_name); |
| |
| /** |
| * image_get_crypto_algo() - Look up a cryptosystem algorithm |
| * |
| * @param full_name Name of algorithm in the form "checksum,crypto" |
| * @return pointer to algorithm information, or NULL if not found |
| */ |
| struct crypto_algo *image_get_crypto_algo(const char *full_name); |
| |
| /** |
| * image_get_padding_algo() - Look up a padding algorithm |
| * |
| * @param name Name of padding algorithm |
| * @return pointer to algorithm information, or NULL if not found |
| */ |
| struct padding_algo *image_get_padding_algo(const char *name); |
| |
| /** |
| * fit_image_verify_required_sigs() - Verify signatures marked as 'required' |
| * |
| * @fit: FIT to check |
| * @image_noffset: Offset of image node to check |
| * @data: Image data to check |
| * @size: Size of image data |
| * @sig_blob: FDT containing public keys |
| * @no_sigsp: Returns 1 if no signatures were required, and |
| * therefore nothing was checked. The caller may wish |
| * to fall back to other mechanisms, or refuse to |
| * boot. |
| * @return 0 if all verified ok, <0 on error |
| */ |
| int fit_image_verify_required_sigs(const void *fit, int image_noffset, |
| const char *data, size_t size, const void *sig_blob, |
| int *no_sigsp); |
| |
| /** |
| * fit_image_check_sig() - Check a single image signature node |
| * |
| * @fit: FIT to check |
| * @noffset: Offset of signature node to check |
| * @data: Image data to check |
| * @size: Size of image data |
| * @required_keynode: Offset in the control FDT of the required key node, |
| * if any. If this is given, then the image wil not |
| * pass verification unless that key is used. If this is |
| * -1 then any signature will do. |
| * @err_msgp: In the event of an error, this will be pointed to a |
| * help error string to display to the user. |
| * @return 0 if all verified ok, <0 on error |
| */ |
| int fit_image_check_sig(const void *fit, int noffset, const void *data, |
| size_t size, int required_keynode, char **err_msgp); |
| |
| /** |
| * fit_region_make_list() - Make a list of regions to hash |
| * |
| * Given a list of FIT regions (offset, size) provided by libfdt, create |
| * a list of regions (void *, size) for use by the signature creationg |
| * and verification code. |
| * |
| * @fit: FIT image to process |
| * @fdt_regions: Regions as returned by libfdt |
| * @count: Number of regions returned by libfdt |
| * @region: Place to put list of regions (NULL to allocate it) |
| * @return pointer to list of regions, or NULL if out of memory |
| */ |
| struct image_region *fit_region_make_list(const void *fit, |
| struct fdt_region *fdt_regions, int count, |
| struct image_region *region); |
| |
| static inline int fit_image_check_target_arch(const void *fdt, int node) |
| { |
| #ifndef USE_HOSTCC |
| return fit_image_check_arch(fdt, node, IH_ARCH_DEFAULT); |
| #else |
| return 0; |
| #endif |
| } |
| |
| #ifdef CONFIG_FIT_VERBOSE |
| #define fit_unsupported(msg) printf("! %s:%d " \ |
| "FIT images not supported for '%s'\n", \ |
| __FILE__, __LINE__, (msg)) |
| |
| #define fit_unsupported_reset(msg) printf("! %s:%d " \ |
| "FIT images not supported for '%s' " \ |
| "- must reset board to recover!\n", \ |
| __FILE__, __LINE__, (msg)) |
| #else |
| #define fit_unsupported(msg) |
| #define fit_unsupported_reset(msg) |
| #endif /* CONFIG_FIT_VERBOSE */ |
| #endif /* CONFIG_FIT */ |
| |
| #if defined(CONFIG_ANDROID_BOOT_IMAGE) |
| #include <android_image.h> |
| int android_image_check_header(const boot_img_hdr_t *hdr); |
| int android_image_get_kernel(const boot_img_hdr_t *hdr,int verify,ulong *os_data, ulong *os_len); |
| int android_image_get_ramdisk(const boot_img_hdr_t *hdr,ulong *rd_data, ulong *rd_len); |
| ulong android_image_get_end(const boot_img_hdr_t *hdr); |
| ulong android_image_get_kload(const boot_img_hdr_t *hdr); |
| ulong android_image_get_comp(const boot_img_hdr_t *hdr); |
| int android_image_need_move(ulong *img_addr,const boot_img_hdr_t *hdr); |
| int android_image_get_second(const boot_img_hdr_t *hdr, |
| ulong *second_data, ulong *second_len); |
| void android_print_contents(const boot_img_hdr_t *hdr); |
| int is_android_r_image(void *img_addr); |
| |
| /*android R*/ |
| int android_image_get_ramdisk_v3(const boot_img_hdr_v3_t *hdr, ulong *rd_data, ulong *rd_len); |
| int vendor_boot_image_check_header(const vendor_boot_img_hdr_t * hdr); |
| |
| #endif /* CONFIG_ANDROID_BOOT_IMAGE */ |
| |
| /** |
| * board_fit_config_name_match() - Check for a matching board name |
| * |
| * This is used when SPL loads a FIT containing multiple device tree files |
| * and wants to work out which one to use. The description of each one is |
| * passed to this function. The description comes from the 'description' field |
| * in each (FDT) image node. |
| * |
| * @name: Device tree description |
| * @return 0 if this device tree should be used, non-zero to try the next |
| */ |
| int board_fit_config_name_match(const char *name); |
| |
| #if defined(CONFIG_SPL_FIT_IMAGE_POST_PROCESS) || \ |
| defined(CONFIG_FIT_IMAGE_POST_PROCESS) |
| /** |
| * board_fit_image_post_process() - Do any post-process on FIT binary data |
| * |
| * This is used to do any sort of image manipulation, verification, decryption |
| * etc. in a platform or board specific way. Obviously, anything done here would |
| * need to be comprehended in how the images were prepared before being injected |
| * into the FIT creation (i.e. the binary blobs would have been pre-processed |
| * before being added to the FIT image). |
| * |
| * @image: pointer to the image start pointer |
| * @size: pointer to the image size |
| * @return no return value (failure should be handled internally) |
| */ |
| void board_fit_image_post_process(void **p_image, size_t *p_size); |
| #endif /* CONFIG_SPL_FIT_IMAGE_POST_PROCESS */ |
| |
| #define FDT_ERROR ((ulong)(-1)) |
| |
| ulong fdt_getprop_u32(const void *fdt, int node, const char *prop); |
| |
| /** |
| * fit_find_config_node() - Find the node for the best DTB in a FIT image |
| * |
| * A FIT image contains one or more DTBs. This function parses the |
| * configurations described in the FIT images and returns the node of |
| * the first matching DTB. To check if a DTB matches a board, this function |
| * calls board_fit_config_name_match(). If no matching DTB is found, it returns |
| * the node described by the default configuration if it exists. |
| * |
| * @fdt: pointer to flat device tree |
| * @return the node if found, -ve otherwise |
| */ |
| int fit_find_config_node(const void *fdt); |
| |
| /** |
| * Mapping of image types to function handlers to be invoked on the associated |
| * loaded images |
| * |
| * @type: Type of image, I.E. IH_TYPE_* |
| * @handler: Function to call on loaded image |
| */ |
| struct fit_loadable_tbl { |
| int type; |
| /** |
| * handler() - Process a loaded image |
| * |
| * @data: Pointer to start of loaded image data |
| * @size: Size of loaded image data |
| */ |
| void (*handler)(ulong data, size_t size); |
| }; |
| |
| /* |
| * Define a FIT loadable image type handler |
| * |
| * _type is a valid uimage_type ID as defined in the "Image Type" enum above |
| * _handler is the handler function to call after this image type is loaded |
| */ |
| #define U_BOOT_FIT_LOADABLE_HANDLER(_type, _handler) \ |
| ll_entry_declare(struct fit_loadable_tbl, _function, fit_loadable) = { \ |
| .type = _type, \ |
| .handler = _handler, \ |
| } |
| |
| #endif /* __IMAGE_H__ */ |