/*
 * login(1)
 *
 * This program is derived from 4.3 BSD software and is subject to the
 * copyright notice below.
 *
 * Copyright (C) 2011 Karel Zak <kzak@redhat.com>
 * Rewritten to PAM-only version.
 *
 * Michael Glad (glad@daimi.dk)
 * Computer Science Department, Aarhus University, Denmark
 * 1990-07-04
 *
 * Copyright (c) 1980, 1987, 1988 The Regents of the University of California.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms are permitted
 * provided that the above copyright notice and this paragraph are
 * duplicated in all such forms and that any documentation,
 * advertising materials, and other materials related to such
 * distribution and use acknowledge that the software was developed
 * by the University of California, Berkeley.  The name of the
 * University may not be used to endorse or promote products derived
 * from this software without specific prior written permission.
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
 * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 */
#include <sys/param.h>
#include <stdio.h>
#include <ctype.h>
#include <unistd.h>
#include <getopt.h>
#include <memory.h>
#include <time.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <sys/resource.h>
#include <sys/file.h>
#include <termios.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/wait.h>
#include <signal.h>
#include <errno.h>
#include <grp.h>
#include <pwd.h>
#include <utmpx.h>
#ifdef HAVE_LASTLOG_H
# include <lastlog.h>
#endif
#include <stdlib.h>
#include <sys/syslog.h>
#ifdef HAVE_LINUX_MAJOR_H
# include <linux/major.h>
#endif
#include <netdb.h>
#include <security/pam_appl.h>
#ifdef HAVE_SECURITY_PAM_MISC_H
# include <security/pam_misc.h>
#elif defined(HAVE_SECURITY_OPENPAM_H)
# include <security/openpam.h>
#endif
#include <sys/sendfile.h>

#ifdef HAVE_LIBAUDIT
# include <libaudit.h>
#endif

#include "c.h"
#include "setproctitle.h"
#include "pathnames.h"
#include "strutils.h"
#include "nls.h"
#include "env.h"
#include "xalloc.h"
#include "all-io.h"
#include "fileutils.h"
#include "ttyutils.h"
#include "pwdutils.h"

#include "logindefs.h"

#define is_pam_failure(_rc)	((_rc) != PAM_SUCCESS)

#define LOGIN_MAX_TRIES        3
#define LOGIN_EXIT_TIMEOUT     5
#define LOGIN_TIMEOUT          60

#ifdef USE_TTY_GROUP
# define TTY_MODE 0620
#else
# define TTY_MODE 0600
#endif

#define	TTYGRPNAME	"tty"	/* name of group to own ttys */
#define VCS_PATH_MAX	64

/*
 * Login control struct
 */
struct login_context {
	const char	*tty_path;	/* ttyname() return value */
	const char	*tty_name;	/* tty_path without /dev prefix */
	const char	*tty_number;	/* end of the tty_path */
	mode_t		tty_mode;	/* chmod() mode */

	char		*username;	/* from command line or PAM */

	struct passwd	*pwd;		/* user info */
	char		*pwdbuf;	/* pwd strings */

	pam_handle_t	*pamh;		/* PAM handler */
	struct pam_conv	conv;		/* PAM conversation */

#ifdef LOGIN_CHOWN_VCS
	char		vcsn[VCS_PATH_MAX];	/* virtual console name */
	char		vcsan[VCS_PATH_MAX];
#endif

	char		*thishost;		/* this machine */
	char		*thisdomain;		/* this machine's domain */
	char		*hostname;		/* remote machine */
	char		hostaddress[16];	/* remote address */

	pid_t		pid;
	int		quiet;		/* 1 if hush file exists */

	unsigned int	remote:1,	/* login -h */
			nohost:1,	/* login -H */
			noauth:1,	/* login -f */
			keep_env:1;	/* login -p */
};

/*
 * This bounds the time given to login.  Not a define, so it can
 * be patched on machines where it's too small.
 */
static unsigned int timeout = LOGIN_TIMEOUT;
static int child_pid = 0;
static volatile int got_sig = 0;
static char timeout_msg[128];

#ifdef LOGIN_CHOWN_VCS
/* true if the filedescriptor fd is a console tty, very Linux specific */
static int is_consoletty(int fd)
{
	struct stat stb;

	if ((fstat(fd, &stb) >= 0)
	    && (major(stb.st_rdev) == TTY_MAJOR)
	    && (minor(stb.st_rdev) < 64)) {
		return 1;
	}
	return 0;
}
#endif


/*
 * Robert Ambrose writes:
 * A couple of my users have a problem with login processes hanging around
 * soaking up pts's.  What they seem to hung up on is trying to write out the
 * message 'Login timed out after %d seconds' when the connection has already
 * been dropped.
 * What I did was add a second timeout while trying to write the message, so
 * the process just exits if the second timeout expires.
 */
static void __attribute__ ((__noreturn__))
timedout2(int sig __attribute__ ((__unused__)))
{
	struct termios ti;

	/* reset echo */
	tcgetattr(0, &ti);
	ti.c_lflag |= ECHO;
	tcsetattr(0, TCSANOW, &ti);
	_exit(EXIT_SUCCESS);	/* %% */
}

static void timedout(int sig __attribute__ ((__unused__)))
{
	signal(SIGALRM, timedout2);
	alarm(10);
	ignore_result( write(STDERR_FILENO, timeout_msg, strlen(timeout_msg)) );
	signal(SIGALRM, SIG_IGN);
	alarm(0);
	timedout2(0);
}

/*
 * This handler allows to inform a shell about signals to login. If you have
 * (root) permissions, you can kill all login children by one signal to the
 * login process.
 *
 * Also, a parent who is session leader is able (before setsid() in the child)
 * to inform the child when the controlling tty goes away (e.g. modem hangup).
 */
static void sig_handler(int signal)
{
	if (child_pid)
		kill(-child_pid, signal);
	else
		got_sig = 1;
	if (signal == SIGTERM)
		kill(-child_pid, SIGHUP);	/* because the shell often ignores SIGTERM */
}

/*
 * Let us delay all exit() calls when the user is not authenticated
 * or the session not fully initialized (loginpam_session()).
 */
static void __attribute__ ((__noreturn__)) sleepexit(int eval)
{
	sleep((unsigned int)getlogindefs_num("FAIL_DELAY", LOGIN_EXIT_TIMEOUT));
	exit(eval);
}

static const char *get_thishost(struct login_context *cxt, const char **domain)
{
	if (!cxt->thishost) {
		cxt->thishost = xgethostname();
		if (!cxt->thishost) {
			if (domain)
				*domain = NULL;
			return NULL;
		}
		cxt->thisdomain = strchr(cxt->thishost, '.');
		if (cxt->thisdomain)
			*cxt->thisdomain++ = '\0';
	}

	if (domain)
		*domain = cxt->thisdomain;
	return cxt->thishost;
}

/*
 * Output the /etc/motd file.
 *
 * It determines the name of a login announcement file and outputs it to the
 * user's terminal at login time.  The MOTD_FILE configuration option is a
 * colon-delimited list of filenames.  An empty MOTD_FILE option disables
 * message-of-the-day printing completely.
 */
static void motd(void)
{
	char *motdlist, *motdfile;
	const char *mb;

	mb = getlogindefs_str("MOTD_FILE", _PATH_MOTDFILE);
	if (!mb || !*mb)
		return;

	motdlist = xstrdup(mb);

	for (motdfile = strtok(motdlist, ":"); motdfile;
	     motdfile = strtok(NULL, ":")) {

		struct stat st;
		int fd;

		fd = open(motdfile, O_RDONLY, 0);
		if (fd < 0)
			continue;
		if (!fstat(fd, &st) && st.st_size)
			sendfile(fileno(stdout), fd, NULL, st.st_size);
		close(fd);
	}

	free(motdlist);
}

/*
 * Nice and simple code provided by Linus Torvalds 16-Feb-93.
 * Non-blocking stuff by Maciej W. Rozycki, macro@ds2.pg.gda.pl, 1999.
 *
 * He writes: "Login performs open() on a tty in a blocking mode.
 * In some cases it may make login wait in open() for carrier infinitely,
 * for example if the line is a simplistic case of a three-wire serial
 * connection. I believe login should open the line in non-blocking mode,
 * leaving the decision to make a connection to getty (where it actually
 * belongs)."
 */
static void open_tty(const char *tty)
{
	int i, fd, flags;

	fd = open(tty, O_RDWR | O_NONBLOCK);
	if (fd == -1) {
		syslog(LOG_ERR, _("FATAL: can't reopen tty: %m"));
		sleepexit(EXIT_FAILURE);
	}

	if (!isatty(fd)) {
		close(fd);
		syslog(LOG_ERR, _("FATAL: %s is not a terminal"), tty);
		sleepexit(EXIT_FAILURE);
	}

	flags = fcntl(fd, F_GETFL);
	flags &= ~O_NONBLOCK;
	fcntl(fd, F_SETFL, flags);

	for (i = 0; i < fd; i++)
		close(i);
	for (i = 0; i < 3; i++)
		if (fd != i)
			dup2(fd, i);
	if (fd >= 3)
		close(fd);
}

#define chown_err(_what, _uid, _gid) \
		syslog(LOG_ERR, _("chown (%s, %lu, %lu) failed: %m"), \
			(_what), (unsigned long) (_uid), (unsigned long) (_gid))

#define chmod_err(_what, _mode) \
		syslog(LOG_ERR, _("chmod (%s, %u) failed: %m"), (_what), (_mode))

static void chown_tty(struct login_context *cxt)
{
	const char *grname;
	uid_t uid = cxt->pwd->pw_uid;
	gid_t gid = cxt->pwd->pw_gid;

	grname = getlogindefs_str("TTYGROUP", TTYGRPNAME);
	if (grname && *grname) {
		struct group *gr = getgrnam(grname);
		if (gr)	/* group by name */
			gid = gr->gr_gid;
		else	/* group by ID */
			gid = (gid_t) getlogindefs_num("TTYGROUP", gid);
	}
	if (fchown(0, uid, gid))				/* tty */
		chown_err(cxt->tty_name, uid, gid);
	if (fchmod(0, cxt->tty_mode))
		chmod_err(cxt->tty_name, cxt->tty_mode);

#ifdef LOGIN_CHOWN_VCS
	if (is_consoletty(0)) {
		if (chown(cxt->vcsn, uid, gid))			/* vcs */
			chown_err(cxt->vcsn, uid, gid);
		if (chmod(cxt->vcsn, cxt->tty_mode))
			chmod_err(cxt->vcsn, cxt->tty_mode);

		if (chown(cxt->vcsan, uid, gid))		/* vcsa */
			chown_err(cxt->vcsan, uid, gid);
		if (chmod(cxt->vcsan, cxt->tty_mode))
			chmod_err(cxt->vcsan, cxt->tty_mode);
	}
#endif
}

/*
 * Reads the current terminal path and initializes cxt->tty_* variables.
 */
static void init_tty(struct login_context *cxt)
{
	struct stat st;
	struct termios tt, ttt;

	cxt->tty_mode = (mode_t) getlogindefs_num("TTYPERM", TTY_MODE);

	get_terminal_name(&cxt->tty_path, &cxt->tty_name, &cxt->tty_number);

	/*
	 * In case login is suid it was possible to use a hardlink as stdin
	 * and exploit races for a local root exploit. (Wojciech Purczynski).
	 *
	 * More precisely, the problem is  ttyn := ttyname(0); ...; chown(ttyn);
	 * here ttyname() might return "/tmp/x", a hardlink to a pseudotty.
	 * All of this is a problem only when login is suid, which it isn't.
	 */
	if (!cxt->tty_path || !*cxt->tty_path ||
	    lstat(cxt->tty_path, &st) != 0 || !S_ISCHR(st.st_mode) ||
	    (st.st_nlink > 1 && strncmp(cxt->tty_path, "/dev/", 5)) ||
	    access(cxt->tty_path, R_OK | W_OK) != 0) {

		syslog(LOG_ERR, _("FATAL: bad tty"));
		sleepexit(EXIT_FAILURE);
	}

#ifdef LOGIN_CHOWN_VCS
	if (cxt->tty_number) {
		/* find names of Virtual Console devices, for later mode change */
		snprintf(cxt->vcsn, sizeof(cxt->vcsn), "/dev/vcs%s", cxt->tty_number);
		snprintf(cxt->vcsan, sizeof(cxt->vcsan), "/dev/vcsa%s", cxt->tty_number);
	}
#endif

	tcgetattr(0, &tt);
	ttt = tt;
	ttt.c_cflag &= ~HUPCL;

	if ((fchown(0, 0, 0) || fchmod(0, cxt->tty_mode)) && errno != EROFS) {

		syslog(LOG_ERR, _("FATAL: %s: change permissions failed: %m"),
				cxt->tty_path);
		sleepexit(EXIT_FAILURE);
	}

	/* Kill processes left on this tty */
	tcsetattr(0, TCSANOW, &ttt);

	/*
	 * Let's close file descriptors before vhangup
	 * https://lkml.org/lkml/2012/6/5/145
	 */
	close(STDIN_FILENO);
	close(STDOUT_FILENO);
	close(STDERR_FILENO);

	signal(SIGHUP, SIG_IGN);	/* so vhangup() won't kill us */
	vhangup();
	signal(SIGHUP, SIG_DFL);

	/* open stdin,stdout,stderr to the tty */
	open_tty(cxt->tty_path);

	/* restore tty modes */
	tcsetattr(0, TCSAFLUSH, &tt);
}


/*
 * Logs failed login attempts in _PATH_BTMP, if it exists.
 * Must be called only with username the name of an actual user.
 * The most common login failure is to give password instead of username.
 */
static void log_btmp(struct login_context *cxt)
{
	struct utmpx ut;
	struct timeval tv;

	memset(&ut, 0, sizeof(ut));

	strncpy(ut.ut_user,
		cxt->username ? cxt->username : "(unknown)",
		sizeof(ut.ut_user));

	if (cxt->tty_number)
		strncpy(ut.ut_id, cxt->tty_number, sizeof(ut.ut_id));
	if (cxt->tty_name)
		xstrncpy(ut.ut_line, cxt->tty_name, sizeof(ut.ut_line));

	gettimeofday(&tv, NULL);
	ut.ut_tv.tv_sec = tv.tv_sec;
	ut.ut_tv.tv_usec = tv.tv_usec;

	ut.ut_type = LOGIN_PROCESS;	/* XXX doesn't matter */
	ut.ut_pid = cxt->pid;

	if (cxt->hostname) {
		xstrncpy(ut.ut_host, cxt->hostname, sizeof(ut.ut_host));
		if (*cxt->hostaddress)
			memcpy(&ut.ut_addr_v6, cxt->hostaddress,
			       sizeof(ut.ut_addr_v6));
	}

	updwtmpx(_PATH_BTMP, &ut);
}


#ifdef HAVE_LIBAUDIT
static void log_audit(struct login_context *cxt, int status)
{
	int audit_fd;
	struct passwd *pwd = cxt->pwd;

	audit_fd = audit_open();
	if (audit_fd == -1)
		return;
	if (!pwd && cxt->username)
		pwd = getpwnam(cxt->username);

	audit_log_acct_message(audit_fd,
			       AUDIT_USER_LOGIN,
			       NULL,
			       "login",
			       cxt->username ? cxt->username : "(unknown)",
			       pwd ? pwd->pw_uid : (unsigned int) -1,
			       cxt->hostname,
			       NULL,
			       cxt->tty_name,
			       status);

	close(audit_fd);
}
#else				/* !HAVE_LIBAUDIT */
# define log_audit(cxt, status)
#endif				/* HAVE_LIBAUDIT */

static void log_lastlog(struct login_context *cxt)
{
	struct sigaction sa, oldsa_xfsz;
	struct lastlog ll;
	time_t t;
	int fd;

	if (!cxt->pwd)
		return;

	/* lastlog is huge on systems with large UIDs, ignore SIGXFSZ */
	memset(&sa, 0, sizeof(sa));
	sa.sa_handler = SIG_IGN;
	sigaction(SIGXFSZ, &sa, &oldsa_xfsz);

	fd = open(_PATH_LASTLOG, O_RDWR, 0);
	if (fd < 0)
		goto done;

	if (lseek(fd, (off_t) cxt->pwd->pw_uid * sizeof(ll), SEEK_SET) == -1)
		goto done;

	/*
	 * Print last log message.
	 */
	if (!cxt->quiet) {
		if (read(fd, (char *)&ll, sizeof(ll)) == sizeof(ll) &&
							ll.ll_time != 0) {
			time_t ll_time = (time_t) ll.ll_time;

			printf(_("Last login: %.*s "), 24 - 5, ctime(&ll_time));
			if (*ll.ll_host != '\0')
				printf(_("from %.*s\n"),
				       (int)sizeof(ll.ll_host), ll.ll_host);
			else
				printf(_("on %.*s\n"),
				       (int)sizeof(ll.ll_line), ll.ll_line);
		}
		if (lseek(fd, (off_t) cxt->pwd->pw_uid * sizeof(ll), SEEK_SET) == -1)
			goto done;
	}

	memset((char *)&ll, 0, sizeof(ll));

	time(&t);
	ll.ll_time = t;		/* ll_time is always 32bit */

	if (cxt->tty_name)
		xstrncpy(ll.ll_line, cxt->tty_name, sizeof(ll.ll_line));
	if (cxt->hostname)
		xstrncpy(ll.ll_host, cxt->hostname, sizeof(ll.ll_host));

	if (write_all(fd, (char *)&ll, sizeof(ll)))
		warn(_("write lastlog failed"));
done:
	if (fd >= 0)
		close(fd);

	sigaction(SIGXFSZ, &oldsa_xfsz, NULL);		/* restore original setting */
}

/*
 * Update wtmp and utmp logs.
 */
static void log_utmp(struct login_context *cxt)
{
	struct utmpx ut;
	struct utmpx *utp;
	struct timeval tv;

	utmpxname(_PATH_UTMP);
	setutxent();

	/* Find pid in utmp.
	 *
	 * login sometimes overwrites the runlevel entry in /var/run/utmp,
	 * confusing sysvinit. I added a test for the entry type, and the
	 * problem was gone. (In a runlevel entry, st_pid is not really a pid
	 * but some number calculated from the previous and current runlevel.)
	 * -- Michael Riepe <michael@stud.uni-hannover.de>
	 */
	while ((utp = getutxent()))
		if (utp->ut_pid == cxt->pid
		    && utp->ut_type >= INIT_PROCESS
		    && utp->ut_type <= DEAD_PROCESS)
			break;

	/* If we can't find a pre-existing entry by pid, try by line.
	 * BSD network daemons may rely on this. */
	if (utp == NULL && cxt->tty_name) {
		setutxent();
		ut.ut_type = LOGIN_PROCESS;
		strncpy(ut.ut_line, cxt->tty_name, sizeof(ut.ut_line));
		utp = getutxline(&ut);
	}

	/* If we can't find a pre-existing entry by pid and line, try it by id.
	 * Very stupid telnetd daemons don't set up utmp at all. (kzak) */
	if (utp == NULL && cxt->tty_number) {
	     setutxent();
	     ut.ut_type = DEAD_PROCESS;
	     strncpy(ut.ut_id, cxt->tty_number, sizeof(ut.ut_id));
	     utp = getutxid(&ut);
	}

	if (utp)
		memcpy(&ut, utp, sizeof(ut));
	else
		/* some gettys/telnetds don't initialize utmp... */
		memset(&ut, 0, sizeof(ut));

	if (cxt->tty_number && ut.ut_id[0] == 0)
		strncpy(ut.ut_id, cxt->tty_number, sizeof(ut.ut_id));
	if (cxt->username)
		strncpy(ut.ut_user, cxt->username, sizeof(ut.ut_user));
	if (cxt->tty_name)
		xstrncpy(ut.ut_line, cxt->tty_name, sizeof(ut.ut_line));

	gettimeofday(&tv, NULL);
	ut.ut_tv.tv_sec = tv.tv_sec;
	ut.ut_tv.tv_usec = tv.tv_usec;
	ut.ut_type = USER_PROCESS;
	ut.ut_pid = cxt->pid;
	if (cxt->hostname) {
		xstrncpy(ut.ut_host, cxt->hostname, sizeof(ut.ut_host));
		if (*cxt->hostaddress)
			memcpy(&ut.ut_addr_v6, cxt->hostaddress,
			       sizeof(ut.ut_addr_v6));
	}

	pututxline(&ut);
	endutxent();

	updwtmpx(_PATH_WTMP, &ut);
}

static void log_syslog(struct login_context *cxt)
{
	struct passwd *pwd = cxt->pwd;

	if (!cxt->tty_name)
		return;

	if (!strncmp(cxt->tty_name, "ttyS", 4))
		syslog(LOG_INFO, _("DIALUP AT %s BY %s"),
		       cxt->tty_name, pwd->pw_name);

	if (!pwd->pw_uid) {
		if (cxt->hostname)
			syslog(LOG_NOTICE, _("ROOT LOGIN ON %s FROM %s"),
			       cxt->tty_name, cxt->hostname);
		else
			syslog(LOG_NOTICE, _("ROOT LOGIN ON %s"), cxt->tty_name);
	} else {
		if (cxt->hostname)
			syslog(LOG_INFO, _("LOGIN ON %s BY %s FROM %s"),
			       cxt->tty_name, pwd->pw_name, cxt->hostname);
		else
			syslog(LOG_INFO, _("LOGIN ON %s BY %s"), cxt->tty_name,
			       pwd->pw_name);
	}
}

/* encapsulate stupid "void **" pam_get_item() API */
static int loginpam_get_username(pam_handle_t *pamh, char **name)
{
	const void *item = (void *)*name;
	int rc;
	rc = pam_get_item(pamh, PAM_USER, &item);
	*name = (char *)item;
	return rc;
}

static void loginpam_err(pam_handle_t *pamh, int retcode)
{
	const char *msg = pam_strerror(pamh, retcode);

	if (msg) {
		fprintf(stderr, "\n%s\n", msg);
		syslog(LOG_ERR, "%s", msg);
	}
	pam_end(pamh, retcode);
	sleepexit(EXIT_FAILURE);
}

/*
 * Composes "<host> login: " string; or returns "login: " if -H is given or
 * LOGIN_PLAIN_PROMPT=yes configured.
 */
static const char *loginpam_get_prompt(struct login_context *cxt)
{
	const char *host;
	char *prompt, *dflt_prompt = _("login: ");
	size_t sz;

	if (cxt->nohost)
		return dflt_prompt;	/* -H on command line */

	if (getlogindefs_bool("LOGIN_PLAIN_PROMPT", 0) == 1)
		return dflt_prompt;

	if (!(host = get_thishost(cxt, NULL)))
		return dflt_prompt;

	sz = strlen(host) + 1 + strlen(dflt_prompt) + 1;
	prompt = xmalloc(sz);
	snprintf(prompt, sz, "%s %s", host, dflt_prompt);

	return prompt;
}

static pam_handle_t *init_loginpam(struct login_context *cxt)
{
	pam_handle_t *pamh = NULL;
	int rc;

	/*
	 * username is initialized to NULL and if specified on the command line
	 * it is set.  Therefore, we are safe not setting it to anything.
	 */
	rc = pam_start(cxt->remote ? "remote" : "login",
		       cxt->username, &cxt->conv, &pamh);
	if (rc != PAM_SUCCESS) {
		warnx(_("PAM failure, aborting: %s"), pam_strerror(pamh, rc));
		syslog(LOG_ERR, _("Couldn't initialize PAM: %s"),
		       pam_strerror(pamh, rc));
		sleepexit(EXIT_FAILURE);
	}

	/* hostname & tty are either set to NULL or their correct values,
	 * depending on how much we know. */
	rc = pam_set_item(pamh, PAM_RHOST, cxt->hostname);
	if (is_pam_failure(rc))
		loginpam_err(pamh, rc);

	rc = pam_set_item(pamh, PAM_TTY, cxt->tty_name);
	if (is_pam_failure(rc))
		loginpam_err(pamh, rc);

	/*
	 * Andrew.Taylor@cal.montage.ca: Provide a user prompt to PAM so that
	 * the "login: " prompt gets localized. Unfortunately, PAM doesn't have
	 * an interface to specify the "Password: " string (yet).
	 */
	rc = pam_set_item(pamh, PAM_USER_PROMPT, loginpam_get_prompt(cxt));
	if (is_pam_failure(rc))
		loginpam_err(pamh, rc);

	/* We don't need the original username. We have to follow PAM. */
	free(cxt->username);
	cxt->username = NULL;
	cxt->pamh = pamh;

	return pamh;
}

static void loginpam_auth(struct login_context *cxt)
{
	int rc, show_unknown;
	unsigned int retries, failcount = 0;
	const char *hostname = cxt->hostname ? cxt->hostname :
			       cxt->tty_name ? cxt->tty_name : "<unknown>";
	pam_handle_t *pamh = cxt->pamh;

	/* if we didn't get a user on the command line, set it to NULL */
	loginpam_get_username(pamh, &cxt->username);

	show_unknown = getlogindefs_bool("LOG_UNKFAIL_ENAB", 0);
	retries = getlogindefs_num("LOGIN_RETRIES", LOGIN_MAX_TRIES);

	/*
	 * There may be better ways to deal with some of these conditions, but
	 * at least this way I don't think we'll be giving away information...
	 *
	 * Perhaps someday we can trust that all PAM modules will pay attention
	 * to failure count and get rid of LOGIN_MAX_TRIES?
	 */
	rc = pam_authenticate(pamh, 0);

	while ((++failcount < retries) &&
	       ((rc == PAM_AUTH_ERR) ||
		(rc == PAM_USER_UNKNOWN) ||
		(rc == PAM_CRED_INSUFFICIENT) ||
		(rc == PAM_AUTHINFO_UNAVAIL))) {

		if (rc == PAM_USER_UNKNOWN && !show_unknown)
			/*
			 * Logging unknown usernames may be a security issue if
			 * a user enters her password instead of her login name.
			 */
			cxt->username = NULL;
		else
			loginpam_get_username(pamh, &cxt->username);

		syslog(LOG_NOTICE,
		       _("FAILED LOGIN %u FROM %s FOR %s, %s"),
		       failcount, hostname,
		       cxt->username ? cxt->username : "(unknown)",
		       pam_strerror(pamh, rc));

		log_btmp(cxt);
		log_audit(cxt, 0);

		fprintf(stderr, _("Login incorrect\n\n"));

		pam_set_item(pamh, PAM_USER, NULL);
		rc = pam_authenticate(pamh, 0);
	}

	if (is_pam_failure(rc)) {

		if (rc == PAM_USER_UNKNOWN && !show_unknown)
			cxt->username = NULL;
		else
			loginpam_get_username(pamh, &cxt->username);

		if (rc == PAM_MAXTRIES)
			syslog(LOG_NOTICE,
			       _("TOO MANY LOGIN TRIES (%u) FROM %s FOR %s, %s"),
			       failcount, hostname,
			       cxt->username ? cxt->username : "(unknown)",
			       pam_strerror(pamh, rc));
		else
			syslog(LOG_NOTICE,
			       _("FAILED LOGIN SESSION FROM %s FOR %s, %s"),
			       hostname,
			       cxt->username ? cxt->username : "(unknown)",
			       pam_strerror(pamh, rc));

		log_btmp(cxt);
		log_audit(cxt, 0);

		fprintf(stderr, _("\nLogin incorrect\n"));
		pam_end(pamh, rc);
		sleepexit(EXIT_SUCCESS);
	}
}

static void loginpam_acct(struct login_context *cxt)
{
	int rc;
	pam_handle_t *pamh = cxt->pamh;

	rc = pam_acct_mgmt(pamh, 0);

	if (rc == PAM_NEW_AUTHTOK_REQD)
		rc = pam_chauthtok(pamh, PAM_CHANGE_EXPIRED_AUTHTOK);

	if (is_pam_failure(rc))
		loginpam_err(pamh, rc);

	/*
	 * Grab the user information out of the password file for future use.
	 * First get the username that we are actually using, though.
	 */
	rc = loginpam_get_username(pamh, &cxt->username);
	if (is_pam_failure(rc))
		loginpam_err(pamh, rc);

	if (!cxt->username || !*cxt->username) {
		warnx(_("\nSession setup problem, abort."));
		syslog(LOG_ERR, _("NULL user name in %s:%d. Abort."),
		       __FUNCTION__, __LINE__);
		pam_end(pamh, PAM_SYSTEM_ERR);
		sleepexit(EXIT_FAILURE);
	}
}

/*
 * Note that the position of the pam_setcred() call is discussable:
 *
 *  - the PAM docs recommend pam_setcred() before pam_open_session()
 *  - but the original RFC http://www.opengroup.org/rfc/mirror-rfc/rfc86.0.txt
 *    uses pam_setcred() after pam_open_session()
 *
 * The old login versions (before year 2011) followed the RFC. This is probably
 * not optimal, because there could be a dependence between some session modules
 * and the user's credentials.
 *
 * The best is probably to follow openssh and call pam_setcred() before and
 * after pam_open_session().                -- kzak@redhat.com (18-Nov-2011)
 *
 */
static void loginpam_session(struct login_context *cxt)
{
	int rc;
	pam_handle_t *pamh = cxt->pamh;

	rc = pam_setcred(pamh, PAM_ESTABLISH_CRED);
	if (is_pam_failure(rc))
		loginpam_err(pamh, rc);

	rc = pam_open_session(pamh, 0);
	if (is_pam_failure(rc)) {
		pam_setcred(cxt->pamh, PAM_DELETE_CRED);
		loginpam_err(pamh, rc);
	}

	rc = pam_setcred(pamh, PAM_REINITIALIZE_CRED);
	if (is_pam_failure(rc)) {
		pam_close_session(pamh, 0);
		loginpam_err(pamh, rc);
	}
}

/*
 * Detach the controlling terminal, fork, restore syslog stuff, and create
 * a new session.
 */
static void fork_session(struct login_context *cxt)
{
	struct sigaction sa, oldsa_hup, oldsa_term;

	signal(SIGALRM, SIG_DFL);
	signal(SIGQUIT, SIG_DFL);
	signal(SIGTSTP, SIG_IGN);

	memset(&sa, 0, sizeof(sa));
	sa.sa_handler = SIG_IGN;
	sigaction(SIGINT, &sa, NULL);

	sigaction(SIGHUP, &sa, &oldsa_hup);	/* ignore when TIOCNOTTY */

	/*
	 * Detach the controlling tty.
	 * We don't need the tty in a parent who only waits for a child.
	 * The child calls setsid() that detaches from the tty as well.
	 */
	ioctl(0, TIOCNOTTY, NULL);

	/*
	 * We have to beware of SIGTERM, because leaving a PAM session
	 * without pam_close_session() is a pretty bad thing.
	 */
	sa.sa_handler = sig_handler;
	sigaction(SIGHUP, &sa, NULL);
	sigaction(SIGTERM, &sa, &oldsa_term);

	closelog();

	/*
	 * We must fork before setuid(), because we need to call
	 * pam_close_session() as root.
	 */
	child_pid = fork();
	if (child_pid < 0) {
		warn(_("fork failed"));

		pam_setcred(cxt->pamh, PAM_DELETE_CRED);
		pam_end(cxt->pamh, pam_close_session(cxt->pamh, 0));
		sleepexit(EXIT_FAILURE);
	}

	if (child_pid) {
		/*
		 * parent - wait for child to finish, then clean up session
		 */
		close(0);
		close(1);
		close(2);
		free_getlogindefs_data();

		sa.sa_handler = SIG_IGN;
		sigaction(SIGQUIT, &sa, NULL);
		sigaction(SIGINT, &sa, NULL);

		/* wait as long as any child is there */
		while (wait(NULL) == -1 && errno == EINTR) ;
		openlog("login", LOG_ODELAY, LOG_AUTHPRIV);

		pam_setcred(cxt->pamh, PAM_DELETE_CRED);
		pam_end(cxt->pamh, pam_close_session(cxt->pamh, 0));
		exit(EXIT_SUCCESS);
	}

	/*
	 * child
	 */
	sigaction(SIGHUP, &oldsa_hup, NULL);		/* restore old state */
	sigaction(SIGTERM, &oldsa_term, NULL);
	if (got_sig)
		exit(EXIT_FAILURE);

	/*
	 * Problem: if the user's shell is a shell like ash that doesn't do
	 * setsid() or setpgrp(), then a ctrl-\, sending SIGQUIT to every
	 * process in the pgrp, will kill us.
	 */

	/* start new session */
	setsid();

	/* make sure we have a controlling tty */
	open_tty(cxt->tty_path);
	openlog("login", LOG_ODELAY, LOG_AUTHPRIV);	/* reopen */

	/*
	 * TIOCSCTTY: steal tty from other process group.
	 */
	if (ioctl(0, TIOCSCTTY, 1))
		syslog(LOG_ERR, _("TIOCSCTTY failed: %m"));
	signal(SIGINT, SIG_DFL);
}

/*
 * Initialize $TERM, $HOME, ...
 */
static void init_environ(struct login_context *cxt)
{
	struct passwd *pwd = cxt->pwd;
	char *termenv, **env;
	char tmp[PATH_MAX];
	int len, i;

	termenv = getenv("TERM");
	if (termenv)
		termenv = xstrdup(termenv);

	/* destroy environment unless user has requested preservation (-p) */
	if (!cxt->keep_env) {
		environ = xmalloc(sizeof(char *));
		memset(environ, 0, sizeof(char *));
	}

	xsetenv("HOME", pwd->pw_dir, 0);	/* legal to override */
	xsetenv("USER", pwd->pw_name, 1);
	xsetenv("SHELL", pwd->pw_shell, 1);
	xsetenv("TERM", termenv ? termenv : "dumb", 1);
	free(termenv);

	if (pwd->pw_uid) {
		if (logindefs_setenv("PATH", "ENV_PATH", _PATH_DEFPATH) != 0)
			err(EXIT_FAILURE, _("failed to set the %s environment variable"), "PATH");

	} else if (logindefs_setenv("PATH", "ENV_ROOTPATH", NULL) != 0 &&
		   logindefs_setenv("PATH", "ENV_SUPATH", _PATH_DEFPATH_ROOT) != 0) {
			err(EXIT_FAILURE, _("failed to set the %s environment variable"), "PATH");
	}

	/* mailx will give a funny error msg if you forget this one */
	len = snprintf(tmp, sizeof(tmp), "%s/%s", _PATH_MAILDIR, pwd->pw_name);
	if (len > 0 && (size_t) len < sizeof(tmp))
		xsetenv("MAIL", tmp, 0);

	/* LOGNAME is not documented in login(1) but HP-UX 6.5 does it. We'll
	 * not allow modifying it.
	 */
	xsetenv("LOGNAME", pwd->pw_name, 1);

	env = pam_getenvlist(cxt->pamh);
	for (i = 0; env && env[i]; i++)
		putenv(env[i]);
}

/*
 * This is called for the -h option, initializes cxt->{hostname,hostaddress}.
 */
static void init_remote_info(struct login_context *cxt, char *remotehost)
{
	const char *domain;
	char *p;
	struct addrinfo hints, *info = NULL;

	cxt->remote = 1;

	get_thishost(cxt, &domain);

	if (domain && (p = strchr(remotehost, '.')) &&
	    strcasecmp(p + 1, domain) == 0)
		*p = '\0';

	cxt->hostname = xstrdup(remotehost);

	memset(&hints, 0, sizeof(hints));
	hints.ai_flags = AI_ADDRCONFIG;
	cxt->hostaddress[0] = 0;

	if (getaddrinfo(cxt->hostname, NULL, &hints, &info) == 0 && info) {
		if (info->ai_family == AF_INET) {
			struct sockaddr_in *sa =
				    (struct sockaddr_in *) info->ai_addr;

			memcpy(cxt->hostaddress, &(sa->sin_addr), sizeof(sa->sin_addr));

		} else if (info->ai_family == AF_INET6) {
			struct sockaddr_in6 *sa =
				     (struct sockaddr_in6 *) info->ai_addr;
#ifdef IN6_IS_ADDR_V4MAPPED
			if (IN6_IS_ADDR_V4MAPPED(&sa->sin6_addr)) {
				const uint8_t *bytes = sa->sin6_addr.s6_addr;
				struct in_addr addr = { *(const in_addr_t *) (bytes + 12) };

				memcpy(cxt->hostaddress, &addr, sizeof(struct in_addr));
			} else
#endif
				memcpy(cxt->hostaddress, &(sa->sin6_addr), sizeof(sa->sin6_addr));
		}
		freeaddrinfo(info);
	}
}

static void __attribute__((__noreturn__)) usage(void)
{
	fputs(USAGE_HEADER, stdout);
	printf(_(" %s [-p] [-h <host>] [-H] [[-f] <username>]\n"), program_invocation_short_name);
	fputs(USAGE_SEPARATOR, stdout);
	fputs(_("Begin a session on the system.\n"), stdout);

	fputs(USAGE_OPTIONS, stdout);
	puts(_(" -p             do not destroy the environment"));
	puts(_(" -f             skip a second login authentication"));
	puts(_(" -h <host>      hostname to be used for utmp logging"));
	puts(_(" -H             suppress hostname in the login prompt"));
	printf("     --help     %s\n", USAGE_OPTSTR_HELP);
	printf(" -V, --version  %s\n", USAGE_OPTSTR_VERSION);
	printf(USAGE_MAN_TAIL("login(1)"));
	exit(EXIT_SUCCESS);
}

int main(int argc, char **argv)
{
	int c;
	int cnt;
	char *childArgv[10];
	char *buff;
	int childArgc = 0;
	int retcode;
	struct sigaction act;
	struct passwd *pwd;

	struct login_context cxt = {
		.tty_mode = TTY_MODE,		  /* tty chmod() */
		.pid = getpid(),		  /* PID */
#ifdef HAVE_SECURITY_PAM_MISC_H
		.conv = { misc_conv, NULL }	  /* Linux-PAM conversation function */
#elif defined(HAVE_SECURITY_OPENPAM_H)
		.conv = { openpam_ttyconv, NULL } /* OpenPAM conversation function */
#endif

	};

	/* the only two longopts to satisfy UL standards */
	enum { HELP_OPTION = CHAR_MAX + 1 };
	static const struct option longopts[] = {
		{"help", no_argument, NULL, HELP_OPTION},
		{"version", no_argument, NULL, 'V'},
		{NULL, 0, NULL, 0}
	};

	timeout = (unsigned int)getlogindefs_num("LOGIN_TIMEOUT", LOGIN_TIMEOUT);

	setlocale(LC_ALL, "");
	bindtextdomain(PACKAGE, LOCALEDIR);
	textdomain(PACKAGE);

	/* TRANSLATORS: The standard value for %u is 60. */
	snprintf(timeout_msg, sizeof(timeout_msg),
	    _("%s: timed out after %u seconds"),
	    program_invocation_short_name, timeout);

	signal(SIGALRM, timedout);
	(void) sigaction(SIGALRM, NULL, &act);
	act.sa_flags &= ~SA_RESTART;
	sigaction(SIGALRM, &act, NULL);
	alarm(timeout);
	signal(SIGQUIT, SIG_IGN);
	signal(SIGINT, SIG_IGN);

	setpriority(PRIO_PROCESS, 0, 0);
	initproctitle(argc, argv);

	/*
	 * -p is used by getty to tell login not to destroy the environment
	 * -f is used to skip a second login authentication
	 * -h is used by other servers to pass the name of the remote
	 *    host to login so that it may be placed in utmp and wtmp
	 */
	while ((c = getopt_long(argc, argv, "fHh:pV", longopts, NULL)) != -1)
		switch (c) {
		case 'f':
			cxt.noauth = 1;
			break;

		case 'H':
			cxt.nohost = 1;
			break;

		case 'h':
			if (getuid()) {
				fprintf(stderr,
					_("login: -h is for superuser only\n"));
				exit(EXIT_FAILURE);
			}
			init_remote_info(&cxt, optarg);
			break;

		case 'p':
			cxt.keep_env = 1;
			break;

		case 'V':
			printf(UTIL_LINUX_VERSION);
			return EXIT_SUCCESS;
		case HELP_OPTION:
			usage();
		default:
			errtryhelp(EXIT_FAILURE);
		}
	argc -= optind;
	argv += optind;

	if (*argv) {
		char *p = *argv;
		cxt.username = xstrdup(p);

		/* Wipe the name - some people mistype their password here. */
		/* (Of course we are too late, but perhaps this helps a little...) */
		while (*p)
			*p++ = ' ';
	}

	for (cnt = get_fd_tabsize() - 1; cnt > 2; cnt--)
		close(cnt);

	setpgrp();	 /* set pgid to pid this means that setsid() will fail */
	init_tty(&cxt);

	openlog("login", LOG_ODELAY, LOG_AUTHPRIV);

	init_loginpam(&cxt);

	/* login -f, then the user has already been authenticated */
	cxt.noauth = cxt.noauth && getuid() == 0 ? 1 : 0;

	if (!cxt.noauth)
		loginpam_auth(&cxt);

	/*
	 * Authentication may be skipped (for example, during krlogin, rlogin,
	 * etc...), but it doesn't mean that we can skip other account checks.
	 * The account could be disabled or the password has expired (although
	 * the kerberos ticket is valid).      -- kzak@redhat.com (22-Feb-2006)
	 */
	loginpam_acct(&cxt);

	cxt.pwd = xgetpwnam(cxt.username, &cxt.pwdbuf);
	if (!cxt.pwd) {
		warnx(_("\nSession setup problem, abort."));
		syslog(LOG_ERR, _("Invalid user name \"%s\" in %s:%d. Abort."),
		       cxt.username, __FUNCTION__, __LINE__);
		pam_end(cxt.pamh, PAM_SYSTEM_ERR);
		sleepexit(EXIT_FAILURE);
	}

	pwd = cxt.pwd;
	cxt.username = pwd->pw_name;

	/*
	 * Initialize the supplementary group list. This should be done before
	 * pam_setcred, because PAM modules might add groups during that call.
	 *
	 * For root we don't call initgroups, instead we call setgroups with
	 * group 0. This avoids the need to step through the whole group file,
	 * which can cause problems if NIS, NIS+, LDAP or something similar
	 * is used and the machine has network problems.
	 */
	retcode = pwd->pw_uid ? initgroups(cxt.username, pwd->pw_gid) :	/* user */
			        setgroups(0, NULL);			/* root */
	if (retcode < 0) {
		syslog(LOG_ERR, _("groups initialization failed: %m"));
		warnx(_("\nSession setup problem, abort."));
		pam_end(cxt.pamh, PAM_SYSTEM_ERR);
		sleepexit(EXIT_FAILURE);
	}

	/*
	 * Open PAM session (after successful authentication and account check).
	 */
	loginpam_session(&cxt);

	/* committed to login -- turn off timeout */
	alarm((unsigned int)0);

	endpwent();

	cxt.quiet = get_hushlogin_status(pwd, 1);

	log_utmp(&cxt);
	log_audit(&cxt, 1);
	log_lastlog(&cxt);

	chown_tty(&cxt);

	if (setgid(pwd->pw_gid) < 0 && pwd->pw_gid) {
		syslog(LOG_ALERT, _("setgid() failed"));
		exit(EXIT_FAILURE);
	}

	if (pwd->pw_shell == NULL || *pwd->pw_shell == '\0')
		pwd->pw_shell = _PATH_BSHELL;

	init_environ(&cxt);		/* init $HOME, $TERM ... */

	setproctitle("login", cxt.username);

	log_syslog(&cxt);

	if (!cxt.quiet) {
		motd();

#ifdef LOGIN_STAT_MAIL
		/*
		 * This turns out to be a bad idea: when the mail spool
		 * is NFS mounted, and the NFS connection hangs, the
		 * login hangs, even root cannot login.
		 * Checking for mail should be done from the shell.
		 */
		{
			struct stat st;
			char *mail;

			mail = getenv("MAIL");
			if (mail && stat(mail, &st) == 0 && st.st_size != 0) {
				if (st.st_mtime > st.st_atime)
					printf(_("You have new mail.\n"));
				else
					printf(_("You have mail.\n"));
			}
		}
#endif
	}

	/*
	 * Detach the controlling terminal, fork, and create a new session
	 * and reinitialize syslog stuff.
	 */
	fork_session(&cxt);

	/* discard permissions last so we can't get killed and drop core */
	if (setuid(pwd->pw_uid) < 0 && pwd->pw_uid) {
		syslog(LOG_ALERT, _("setuid() failed"));
		exit(EXIT_FAILURE);
	}

	/* wait until here to change directory! */
	if (chdir(pwd->pw_dir) < 0) {
		warn(_("%s: change directory failed"), pwd->pw_dir);

		if (!getlogindefs_bool("DEFAULT_HOME", 1))
			exit(0);
		if (chdir("/"))
			exit(EXIT_FAILURE);
		pwd->pw_dir = "/";
		printf(_("Logging in with home = \"/\".\n"));
	}

	/* if the shell field has a space: treat it like a shell script */
	if (strchr(pwd->pw_shell, ' ')) {
		buff = xmalloc(strlen(pwd->pw_shell) + 6);

		strcpy(buff, "exec ");
		strcat(buff, pwd->pw_shell);
		childArgv[childArgc++] = "/bin/sh";
		childArgv[childArgc++] = "-sh";
		childArgv[childArgc++] = "-c";
		childArgv[childArgc++] = buff;
	} else {
		char tbuf[PATH_MAX + 2], *p;

		tbuf[0] = '-';
		xstrncpy(tbuf + 1, ((p = strrchr(pwd->pw_shell, '/')) ?
				    p + 1 : pwd->pw_shell), sizeof(tbuf) - 1);

		childArgv[childArgc++] = pwd->pw_shell;
		childArgv[childArgc++] = xstrdup(tbuf);
	}

	childArgv[childArgc++] = NULL;

	execvp(childArgv[0], childArgv + 1);

	if (!strcmp(childArgv[0], "/bin/sh"))
		warn(_("couldn't exec shell script"));
	else
		warn(_("no shell"));

	exit(EXIT_SUCCESS);
}