blob: 60605ab293ef5585d1b3048ca5d3da30df6f5961 [file] [log] [blame]
/* -*- mode: C; c-file-style: "gnu"; indent-tabs-mode: nil; -*- */
/* dbus-protocol.h D-Bus protocol constants
*
* Copyright (C) 2002, 2003 CodeFactory AB
* Copyright (C) 2004, 2005 Red Hat, Inc.
*
* Licensed under the Academic Free License version 2.1
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifndef DBUS_PROTOCOL_H
#define DBUS_PROTOCOL_H
/* Don't include anything in here from anywhere else. It's
* intended for use by any random library.
*/
#ifdef __cplusplus
extern "C" {
#if 0
} /* avoids confusing emacs indentation */
#endif
#endif
/* Normally docs are in .c files, but there isn't a .c file for this. */
/**
* @defgroup DBusProtocol Protocol constants
* @ingroup DBus
*
* @brief Defines constants which are part of the D-Bus protocol
*
* This header is intended for use by any library, not only libdbus.
*
* @{
*/
/* Message byte order */
#define DBUS_LITTLE_ENDIAN ('l') /**< Code marking LSB-first byte order in the wire protocol. */
#define DBUS_BIG_ENDIAN ('B') /**< Code marking MSB-first byte order in the wire protocol. */
/** Protocol version. */
#define DBUS_MAJOR_PROTOCOL_VERSION 1
/** Type code that is never equal to a legitimate type code */
#define DBUS_TYPE_INVALID ((int) '\0')
/** #DBUS_TYPE_INVALID as a string literal instead of a int literal */
#define DBUS_TYPE_INVALID_AS_STRING "\0"
/* Primitive types */
/** Type code marking an 8-bit unsigned integer */
#define DBUS_TYPE_BYTE ((int) 'y')
/** #DBUS_TYPE_BYTE as a string literal instead of a int literal */
#define DBUS_TYPE_BYTE_AS_STRING "y"
/** Type code marking a boolean */
#define DBUS_TYPE_BOOLEAN ((int) 'b')
/** #DBUS_TYPE_BOOLEAN as a string literal instead of a int literal */
#define DBUS_TYPE_BOOLEAN_AS_STRING "b"
/** Type code marking a 16-bit signed integer */
#define DBUS_TYPE_INT16 ((int) 'n')
/** #DBUS_TYPE_INT16 as a string literal instead of a int literal */
#define DBUS_TYPE_INT16_AS_STRING "n"
/** Type code marking a 16-bit unsigned integer */
#define DBUS_TYPE_UINT16 ((int) 'q')
/** #DBUS_TYPE_UINT16 as a string literal instead of a int literal */
#define DBUS_TYPE_UINT16_AS_STRING "q"
/** Type code marking a 32-bit signed integer */
#define DBUS_TYPE_INT32 ((int) 'i')
/** #DBUS_TYPE_INT32 as a string literal instead of a int literal */
#define DBUS_TYPE_INT32_AS_STRING "i"
/** Type code marking a 32-bit unsigned integer */
#define DBUS_TYPE_UINT32 ((int) 'u')
/** #DBUS_TYPE_UINT32 as a string literal instead of a int literal */
#define DBUS_TYPE_UINT32_AS_STRING "u"
/** Type code marking a 64-bit signed integer */
#define DBUS_TYPE_INT64 ((int) 'x')
/** #DBUS_TYPE_INT64 as a string literal instead of a int literal */
#define DBUS_TYPE_INT64_AS_STRING "x"
/** Type code marking a 64-bit unsigned integer */
#define DBUS_TYPE_UINT64 ((int) 't')
/** #DBUS_TYPE_UINT64 as a string literal instead of a int literal */
#define DBUS_TYPE_UINT64_AS_STRING "t"
/** Type code marking an 8-byte double in IEEE 754 format */
#define DBUS_TYPE_DOUBLE ((int) 'd')
/** #DBUS_TYPE_DOUBLE as a string literal instead of a int literal */
#define DBUS_TYPE_DOUBLE_AS_STRING "d"
/** Type code marking a UTF-8 encoded, nul-terminated Unicode string */
#define DBUS_TYPE_STRING ((int) 's')
/** #DBUS_TYPE_STRING as a string literal instead of a int literal */
#define DBUS_TYPE_STRING_AS_STRING "s"
/** Type code marking a D-Bus object path */
#define DBUS_TYPE_OBJECT_PATH ((int) 'o')
/** #DBUS_TYPE_OBJECT_PATH as a string literal instead of a int literal */
#define DBUS_TYPE_OBJECT_PATH_AS_STRING "o"
/** Type code marking a D-Bus type signature */
#define DBUS_TYPE_SIGNATURE ((int) 'g')
/** #DBUS_TYPE_SIGNATURE as a string literal instead of a int literal */
#define DBUS_TYPE_SIGNATURE_AS_STRING "g"
/** Type code marking a unix file descriptor */
#define DBUS_TYPE_UNIX_FD ((int) 'h')
/** #DBUS_TYPE_UNIX_FD as a string literal instead of a int literal */
#define DBUS_TYPE_UNIX_FD_AS_STRING "h"
/* Compound types */
/** Type code marking a D-Bus array type */
#define DBUS_TYPE_ARRAY ((int) 'a')
/** #DBUS_TYPE_ARRAY as a string literal instead of a int literal */
#define DBUS_TYPE_ARRAY_AS_STRING "a"
/** Type code marking a D-Bus variant type */
#define DBUS_TYPE_VARIANT ((int) 'v')
/** #DBUS_TYPE_VARIANT as a string literal instead of a int literal */
#define DBUS_TYPE_VARIANT_AS_STRING "v"
/** STRUCT and DICT_ENTRY are sort of special since their codes can't
* appear in a type string, instead
* DBUS_STRUCT_BEGIN_CHAR/DBUS_DICT_ENTRY_BEGIN_CHAR have to appear
*/
/** Type code used to represent a struct; however, this type code does not appear
* in type signatures, instead #DBUS_STRUCT_BEGIN_CHAR and #DBUS_STRUCT_END_CHAR will
* appear in a signature.
*/
#define DBUS_TYPE_STRUCT ((int) 'r')
/** #DBUS_TYPE_STRUCT as a string literal instead of a int literal */
#define DBUS_TYPE_STRUCT_AS_STRING "r"
/** Type code used to represent a dict entry; however, this type code does not appear
* in type signatures, instead #DBUS_DICT_ENTRY_BEGIN_CHAR and #DBUS_DICT_ENTRY_END_CHAR will
* appear in a signature.
*/
#define DBUS_TYPE_DICT_ENTRY ((int) 'e')
/** #DBUS_TYPE_DICT_ENTRY as a string literal instead of a int literal */
#define DBUS_TYPE_DICT_ENTRY_AS_STRING "e"
/** Does not include #DBUS_TYPE_INVALID, #DBUS_STRUCT_BEGIN_CHAR, #DBUS_STRUCT_END_CHAR,
* #DBUS_DICT_ENTRY_BEGIN_CHAR, or #DBUS_DICT_ENTRY_END_CHAR - i.e. it is the number of
* valid types, not the number of distinct characters that may appear in a type signature.
*/
#define DBUS_NUMBER_OF_TYPES (16)
/* characters other than typecodes that appear in type signatures */
/** Code marking the start of a struct type in a type signature */
#define DBUS_STRUCT_BEGIN_CHAR ((int) '(')
/** #DBUS_STRUCT_BEGIN_CHAR as a string literal instead of a int literal */
#define DBUS_STRUCT_BEGIN_CHAR_AS_STRING "("
/** Code marking the end of a struct type in a type signature */
#define DBUS_STRUCT_END_CHAR ((int) ')')
/** #DBUS_STRUCT_END_CHAR a string literal instead of a int literal */
#define DBUS_STRUCT_END_CHAR_AS_STRING ")"
/** Code marking the start of a dict entry type in a type signature */
#define DBUS_DICT_ENTRY_BEGIN_CHAR ((int) '{')
/** #DBUS_DICT_ENTRY_BEGIN_CHAR as a string literal instead of a int literal */
#define DBUS_DICT_ENTRY_BEGIN_CHAR_AS_STRING "{"
/** Code marking the end of a dict entry type in a type signature */
#define DBUS_DICT_ENTRY_END_CHAR ((int) '}')
/** #DBUS_DICT_ENTRY_END_CHAR as a string literal instead of a int literal */
#define DBUS_DICT_ENTRY_END_CHAR_AS_STRING "}"
/** Max length in bytes of a bus name, interface, or member (not object
* path, paths are unlimited). This is limited because lots of stuff
* is O(n) in this number, plus it would be obnoxious to type in a
* paragraph-long method name so most likely something like that would
* be an exploit.
*/
#define DBUS_MAXIMUM_NAME_LENGTH 255
/** This one is 255 so it fits in a byte */
#define DBUS_MAXIMUM_SIGNATURE_LENGTH 255
/** Max length of a match rule string; to keep people from hosing the
* daemon with some huge rule
*/
#define DBUS_MAXIMUM_MATCH_RULE_LENGTH 1024
/** Max arg number you can match on in a match rule, e.g.
* arg0='hello' is OK, arg3489720987='hello' is not
*/
#define DBUS_MAXIMUM_MATCH_RULE_ARG_NUMBER 63
/** Max length of a marshaled array in bytes (64M, 2^26) We use signed
* int for lengths so must be INT_MAX or less. We need something a
* bit smaller than INT_MAX because the array is inside a message with
* header info, etc. so an INT_MAX array wouldn't allow the message
* overhead. The 64M number is an attempt at a larger number than
* we'd reasonably ever use, but small enough that your bus would chew
* through it fairly quickly without locking up forever. If you have
* data that's likely to be larger than this, you should probably be
* sending it in multiple incremental messages anyhow.
*/
#define DBUS_MAXIMUM_ARRAY_LENGTH (67108864)
/** Number of bits you need in an unsigned to store the max array size */
#define DBUS_MAXIMUM_ARRAY_LENGTH_BITS 26
/** The maximum total message size including header and body; similar
* rationale to max array size.
*/
#define DBUS_MAXIMUM_MESSAGE_LENGTH (DBUS_MAXIMUM_ARRAY_LENGTH * 2)
/** Number of bits you need in an unsigned to store the max message size */
#define DBUS_MAXIMUM_MESSAGE_LENGTH_BITS 27
/** The maximum total number of unix fds in a message. Similar
* rationale as DBUS_MAXIMUM_MESSAGE_LENGTH. However we divide by four
* given that one fd is an int and hence at least 32 bits.
*/
#define DBUS_MAXIMUM_MESSAGE_UNIX_FDS (DBUS_MAXIMUM_MESSAGE_LENGTH/4)
/** Number of bits you need in an unsigned to store the max message unix fds */
#define DBUS_MAXIMUM_MESSAGE_UNIX_FDS_BITS (DBUS_MAXIMUM_MESSAGE_LENGTH_BITS-2)
/** Depth of recursion in the type tree. This is automatically limited
* to DBUS_MAXIMUM_SIGNATURE_LENGTH since you could only have an array
* of array of array of ... that fit in the max signature. But that's
* probably a bit too large.
*/
#define DBUS_MAXIMUM_TYPE_RECURSION_DEPTH 32
/* Types of message */
/** This value is never a valid message type, see dbus_message_get_type() */
#define DBUS_MESSAGE_TYPE_INVALID 0
/** Message type of a method call message, see dbus_message_get_type() */
#define DBUS_MESSAGE_TYPE_METHOD_CALL 1
/** Message type of a method return message, see dbus_message_get_type() */
#define DBUS_MESSAGE_TYPE_METHOD_RETURN 2
/** Message type of an error reply message, see dbus_message_get_type() */
#define DBUS_MESSAGE_TYPE_ERROR 3
/** Message type of a signal message, see dbus_message_get_type() */
#define DBUS_MESSAGE_TYPE_SIGNAL 4
#define DBUS_NUM_MESSAGE_TYPES 5
/* Header flags */
/** If set, this flag means that the sender of a message does not care about getting
* a reply, so the recipient need not send one. See dbus_message_set_no_reply().
*/
#define DBUS_HEADER_FLAG_NO_REPLY_EXPECTED 0x1
/**
* If set, this flag means that even if the message bus knows how to start an owner for
* the destination bus name (see dbus_message_set_destination()), it should not
* do so. If this flag is not set, the bus may launch a program to process the
* message.
*/
#define DBUS_HEADER_FLAG_NO_AUTO_START 0x2
/* Header fields */
/** Not equal to any valid header field code */
#define DBUS_HEADER_FIELD_INVALID 0
/** Header field code for the path - the path is the object emitting a signal or the object receiving a method call.
* See dbus_message_set_path().
*/
#define DBUS_HEADER_FIELD_PATH 1
/** Header field code for the interface containing a member (method or signal).
* See dbus_message_set_interface().
*/
#define DBUS_HEADER_FIELD_INTERFACE 2
/** Header field code for a member (method or signal). See dbus_message_set_member(). */
#define DBUS_HEADER_FIELD_MEMBER 3
/** Header field code for an error name (found in #DBUS_MESSAGE_TYPE_ERROR messages).
* See dbus_message_set_error_name().
*/
#define DBUS_HEADER_FIELD_ERROR_NAME 4
/** Header field code for a reply serial, used to match a #DBUS_MESSAGE_TYPE_METHOD_RETURN message with the
* message that it's a reply to. See dbus_message_set_reply_serial().
*/
#define DBUS_HEADER_FIELD_REPLY_SERIAL 5
/**
* Header field code for the destination bus name of a message. See dbus_message_set_destination().
*/
#define DBUS_HEADER_FIELD_DESTINATION 6
/**
* Header field code for the sender of a message; usually initialized by the message bus.
* See dbus_message_set_sender().
*/
#define DBUS_HEADER_FIELD_SENDER 7
/**
* Header field code for the type signature of a message.
*/
#define DBUS_HEADER_FIELD_SIGNATURE 8
/**
* Header field code for the number of unix file descriptors associated
* with this message.
*/
#define DBUS_HEADER_FIELD_UNIX_FDS 9
/**
* Value of the highest-numbered header field code, can be used to determine
* the size of an array indexed by header field code. Remember though
* that unknown codes must be ignored, so check for that before
* indexing the array.
*/
#define DBUS_HEADER_FIELD_LAST DBUS_HEADER_FIELD_UNIX_FDS
/** Header format is defined as a signature:
* byte byte order
* byte message type ID
* byte flags
* byte protocol version
* uint32 body length
* uint32 serial
* array of struct (byte,variant) (field name, value)
*
* The length of the header can be computed as the
* fixed size of the initial data, plus the length of
* the array at the end, plus padding to an 8-boundary.
*/
#define DBUS_HEADER_SIGNATURE \
DBUS_TYPE_BYTE_AS_STRING \
DBUS_TYPE_BYTE_AS_STRING \
DBUS_TYPE_BYTE_AS_STRING \
DBUS_TYPE_BYTE_AS_STRING \
DBUS_TYPE_UINT32_AS_STRING \
DBUS_TYPE_UINT32_AS_STRING \
DBUS_TYPE_ARRAY_AS_STRING \
DBUS_STRUCT_BEGIN_CHAR_AS_STRING \
DBUS_TYPE_BYTE_AS_STRING \
DBUS_TYPE_VARIANT_AS_STRING \
DBUS_STRUCT_END_CHAR_AS_STRING
/**
* The smallest header size that can occur. (It won't be valid due to
* missing required header fields.) This is 4 bytes, two uint32, an
* array length. This isn't any kind of resource limit, just the
* necessary/logical outcome of the header signature.
*/
#define DBUS_MINIMUM_HEADER_SIZE 16
/* Errors */
/* WARNING these get autoconverted to an enum in dbus-glib.h. Thus,
* if you change the order it breaks the ABI. Keep them in order.
* Also, don't change the formatting since that will break the sed
* script.
*/
/** A generic error; "something went wrong" - see the error message for more. */
#define DBUS_ERROR_FAILED "org.freedesktop.DBus.Error.Failed"
/** There was not enough memory to complete an operation. */
#define DBUS_ERROR_NO_MEMORY "org.freedesktop.DBus.Error.NoMemory"
/** The bus doesn't know how to launch a service to supply the bus name you wanted. */
#define DBUS_ERROR_SERVICE_UNKNOWN "org.freedesktop.DBus.Error.ServiceUnknown"
/** The bus name you referenced doesn't exist (i.e. no application owns it). */
#define DBUS_ERROR_NAME_HAS_NO_OWNER "org.freedesktop.DBus.Error.NameHasNoOwner"
/** No reply to a message expecting one, usually means a timeout occurred. */
#define DBUS_ERROR_NO_REPLY "org.freedesktop.DBus.Error.NoReply"
/** Something went wrong reading or writing to a socket, for example. */
#define DBUS_ERROR_IO_ERROR "org.freedesktop.DBus.Error.IOError"
/** A D-Bus bus address was malformed. */
#define DBUS_ERROR_BAD_ADDRESS "org.freedesktop.DBus.Error.BadAddress"
/** Requested operation isn't supported (like ENOSYS on UNIX). */
#define DBUS_ERROR_NOT_SUPPORTED "org.freedesktop.DBus.Error.NotSupported"
/** Some limited resource is exhausted. */
#define DBUS_ERROR_LIMITS_EXCEEDED "org.freedesktop.DBus.Error.LimitsExceeded"
/** Security restrictions don't allow doing what you're trying to do. */
#define DBUS_ERROR_ACCESS_DENIED "org.freedesktop.DBus.Error.AccessDenied"
/** Authentication didn't work. */
#define DBUS_ERROR_AUTH_FAILED "org.freedesktop.DBus.Error.AuthFailed"
/** Unable to connect to server (probably caused by ECONNREFUSED on a socket). */
#define DBUS_ERROR_NO_SERVER "org.freedesktop.DBus.Error.NoServer"
/** Certain timeout errors, possibly ETIMEDOUT on a socket.
* Note that #DBUS_ERROR_NO_REPLY is used for message reply timeouts.
* @warning this is confusingly-named given that #DBUS_ERROR_TIMED_OUT also exists. We can't fix
* it for compatibility reasons so just be careful.
*/
#define DBUS_ERROR_TIMEOUT "org.freedesktop.DBus.Error.Timeout"
/** No network access (probably ENETUNREACH on a socket). */
#define DBUS_ERROR_NO_NETWORK "org.freedesktop.DBus.Error.NoNetwork"
/** Can't bind a socket since its address is in use (i.e. EADDRINUSE). */
#define DBUS_ERROR_ADDRESS_IN_USE "org.freedesktop.DBus.Error.AddressInUse"
/** The connection is disconnected and you're trying to use it. */
#define DBUS_ERROR_DISCONNECTED "org.freedesktop.DBus.Error.Disconnected"
/** Invalid arguments passed to a method call. */
#define DBUS_ERROR_INVALID_ARGS "org.freedesktop.DBus.Error.InvalidArgs"
/** Missing file. */
#define DBUS_ERROR_FILE_NOT_FOUND "org.freedesktop.DBus.Error.FileNotFound"
/** Existing file and the operation you're using does not silently overwrite. */
#define DBUS_ERROR_FILE_EXISTS "org.freedesktop.DBus.Error.FileExists"
/** Method name you invoked isn't known by the object you invoked it on. */
#define DBUS_ERROR_UNKNOWN_METHOD "org.freedesktop.DBus.Error.UnknownMethod"
/** Object you invoked a method on isn't known. */
#define DBUS_ERROR_UNKNOWN_OBJECT "org.freedesktop.DBus.Error.UnknownObject"
/** Interface you invoked a method on isn't known by the object. */
#define DBUS_ERROR_UNKNOWN_INTERFACE "org.freedesktop.DBus.Error.UnknownInterface"
/** Property you tried to access isn't known by the object. */
#define DBUS_ERROR_UNKNOWN_PROPERTY "org.freedesktop.DBus.Error.UnknownProperty"
/** Property you tried to set is read-only. */
#define DBUS_ERROR_PROPERTY_READ_ONLY "org.freedesktop.DBus.Error.PropertyReadOnly"
/** Certain timeout errors, e.g. while starting a service.
* @warning this is confusingly-named given that #DBUS_ERROR_TIMEOUT also exists. We can't fix
* it for compatibility reasons so just be careful.
*/
#define DBUS_ERROR_TIMED_OUT "org.freedesktop.DBus.Error.TimedOut"
/** Tried to remove or modify a match rule that didn't exist. */
#define DBUS_ERROR_MATCH_RULE_NOT_FOUND "org.freedesktop.DBus.Error.MatchRuleNotFound"
/** The match rule isn't syntactically valid. */
#define DBUS_ERROR_MATCH_RULE_INVALID "org.freedesktop.DBus.Error.MatchRuleInvalid"
/** While starting a new process, the exec() call failed. */
#define DBUS_ERROR_SPAWN_EXEC_FAILED "org.freedesktop.DBus.Error.Spawn.ExecFailed"
/** While starting a new process, the fork() call failed. */
#define DBUS_ERROR_SPAWN_FORK_FAILED "org.freedesktop.DBus.Error.Spawn.ForkFailed"
/** While starting a new process, the child exited with a status code. */
#define DBUS_ERROR_SPAWN_CHILD_EXITED "org.freedesktop.DBus.Error.Spawn.ChildExited"
/** While starting a new process, the child exited on a signal. */
#define DBUS_ERROR_SPAWN_CHILD_SIGNALED "org.freedesktop.DBus.Error.Spawn.ChildSignaled"
/** While starting a new process, something went wrong. */
#define DBUS_ERROR_SPAWN_FAILED "org.freedesktop.DBus.Error.Spawn.Failed"
/** We failed to setup the environment correctly. */
#define DBUS_ERROR_SPAWN_SETUP_FAILED "org.freedesktop.DBus.Error.Spawn.FailedToSetup"
/** We failed to setup the config parser correctly. */
#define DBUS_ERROR_SPAWN_CONFIG_INVALID "org.freedesktop.DBus.Error.Spawn.ConfigInvalid"
/** Bus name was not valid. */
#define DBUS_ERROR_SPAWN_SERVICE_INVALID "org.freedesktop.DBus.Error.Spawn.ServiceNotValid"
/** Service file not found in system-services directory. */
#define DBUS_ERROR_SPAWN_SERVICE_NOT_FOUND "org.freedesktop.DBus.Error.Spawn.ServiceNotFound"
/** Permissions are incorrect on the setuid helper. */
#define DBUS_ERROR_SPAWN_PERMISSIONS_INVALID "org.freedesktop.DBus.Error.Spawn.PermissionsInvalid"
/** Service file invalid (Name, User or Exec missing). */
#define DBUS_ERROR_SPAWN_FILE_INVALID "org.freedesktop.DBus.Error.Spawn.FileInvalid"
/** Tried to get a UNIX process ID and it wasn't available. */
#define DBUS_ERROR_SPAWN_NO_MEMORY "org.freedesktop.DBus.Error.Spawn.NoMemory"
/** Tried to get a UNIX process ID and it wasn't available. */
#define DBUS_ERROR_UNIX_PROCESS_ID_UNKNOWN "org.freedesktop.DBus.Error.UnixProcessIdUnknown"
/** A type signature is not valid. */
#define DBUS_ERROR_INVALID_SIGNATURE "org.freedesktop.DBus.Error.InvalidSignature"
/** A file contains invalid syntax or is otherwise broken. */
#define DBUS_ERROR_INVALID_FILE_CONTENT "org.freedesktop.DBus.Error.InvalidFileContent"
/** Asked for SELinux security context and it wasn't available. */
#define DBUS_ERROR_SELINUX_SECURITY_CONTEXT_UNKNOWN "org.freedesktop.DBus.Error.SELinuxSecurityContextUnknown"
/** Asked for ADT audit data and it wasn't available. */
#define DBUS_ERROR_ADT_AUDIT_DATA_UNKNOWN "org.freedesktop.DBus.Error.AdtAuditDataUnknown"
/** There's already an object with the requested object path. */
#define DBUS_ERROR_OBJECT_PATH_IN_USE "org.freedesktop.DBus.Error.ObjectPathInUse"
/** The message meta data does not match the payload. e.g. expected
number of file descriptors were not sent over the socket this message was received on. */
#define DBUS_ERROR_INCONSISTENT_MESSAGE "org.freedesktop.DBus.Error.InconsistentMessage"
/* XML introspection format */
/** XML namespace of the introspection format version 1.0 */
#define DBUS_INTROSPECT_1_0_XML_NAMESPACE "http://www.freedesktop.org/standards/dbus"
/** XML public identifier of the introspection format version 1.0 */
#define DBUS_INTROSPECT_1_0_XML_PUBLIC_IDENTIFIER "-//freedesktop//DTD D-BUS Object Introspection 1.0//EN"
/** XML system identifier of the introspection format version 1.0 */
#define DBUS_INTROSPECT_1_0_XML_SYSTEM_IDENTIFIER "http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd"
/** XML document type declaration of the introspection format version 1.0 */
#define DBUS_INTROSPECT_1_0_XML_DOCTYPE_DECL_NODE "<!DOCTYPE node PUBLIC \"" DBUS_INTROSPECT_1_0_XML_PUBLIC_IDENTIFIER "\"\n\"" DBUS_INTROSPECT_1_0_XML_SYSTEM_IDENTIFIER "\">\n"
/** @} */
#ifdef __cplusplus
#if 0
{ /* avoids confusing emacs indentation */
#endif
}
#endif
#endif /* DBUS_PROTOCOL_H */