| # Makefile.in generated by automake 1.15 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994-2014 Free Software Foundation, Inc. |
| |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # GLIB - Library of useful C routines |
| |
| |
| |
| |
| VPATH = @srcdir@ |
| am__is_gnu_make = { \ |
| if test -z '$(MAKELEVEL)'; then \ |
| false; \ |
| elif test -n '$(MAKE_HOST)'; then \ |
| true; \ |
| elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ |
| true; \ |
| else \ |
| false; \ |
| fi; \ |
| } |
| am__make_running_with_option = \ |
| case $${target_option-} in \ |
| ?) ;; \ |
| *) echo "am__make_running_with_option: internal error: invalid" \ |
| "target option '$${target_option-}' specified" >&2; \ |
| exit 1;; \ |
| esac; \ |
| has_opt=no; \ |
| sane_makeflags=$$MAKEFLAGS; \ |
| if $(am__is_gnu_make); then \ |
| sane_makeflags=$$MFLAGS; \ |
| else \ |
| case $$MAKEFLAGS in \ |
| *\\[\ \ ]*) \ |
| bs=\\; \ |
| sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ |
| | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ |
| esac; \ |
| fi; \ |
| skip_next=no; \ |
| strip_trailopt () \ |
| { \ |
| flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ |
| }; \ |
| for flg in $$sane_makeflags; do \ |
| test $$skip_next = yes && { skip_next=no; continue; }; \ |
| case $$flg in \ |
| *=*|--*) continue;; \ |
| -*I) strip_trailopt 'I'; skip_next=yes;; \ |
| -*I?*) strip_trailopt 'I';; \ |
| -*O) strip_trailopt 'O'; skip_next=yes;; \ |
| -*O?*) strip_trailopt 'O';; \ |
| -*l) strip_trailopt 'l'; skip_next=yes;; \ |
| -*l?*) strip_trailopt 'l';; \ |
| -[dEDm]) skip_next=yes;; \ |
| -[JT]) skip_next=yes;; \ |
| esac; \ |
| case $$flg in \ |
| *$$target_option*) has_opt=yes; break;; \ |
| esac; \ |
| done; \ |
| test $$has_opt = yes |
| am__make_dryrun = (target_option=n; $(am__make_running_with_option)) |
| am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| installed_test_PROGRAMS = $(am__EXEEXT_1) |
| noinst_PROGRAMS = $(am__EXEEXT_3) |
| check_PROGRAMS = $(am__EXEEXT_2) |
| TESTS = $(am__EXEEXT_1) $(am__append_15) |
| @OS_WIN32_TRUE@am__append_1 = $(test_programs) $(test_scripts) $(uninstalled_test_programs) $(uninstalled_test_scripts) \ |
| @OS_WIN32_TRUE@ $(dist_test_scripts) $(dist_uninstalled_test_scripts) |
| |
| @ENABLE_ALWAYS_BUILD_TESTS_TRUE@am__append_2 = $(all_test_ltlibs) |
| @ENABLE_ALWAYS_BUILD_TESTS_TRUE@am__append_3 = $(all_test_programs) |
| @ENABLE_ALWAYS_BUILD_TESTS_TRUE@am__append_4 = $(all_test_scripts) |
| @ENABLE_ALWAYS_BUILD_TESTS_TRUE@am__append_5 = $(all_test_data) |
| @ENABLE_ALWAYS_BUILD_TESTS_FALSE@am__append_6 = $(all_test_ltlibs) |
| @ENABLE_ALWAYS_BUILD_TESTS_FALSE@am__append_7 = $(all_test_programs) |
| @ENABLE_ALWAYS_BUILD_TESTS_FALSE@am__append_8 = $(all_test_scripts) |
| @ENABLE_ALWAYS_BUILD_TESTS_FALSE@am__append_9 = $(all_test_data) |
| @ENABLE_INSTALLED_TESTS_TRUE@am__append_10 = $(test_programs) $(installed_test_programs) \ |
| @ENABLE_INSTALLED_TESTS_TRUE@ $(test_extra_programs) $(installed_test_extra_programs) |
| |
| @ENABLE_INSTALLED_TESTS_TRUE@am__append_11 = $(test_scripts) \ |
| @ENABLE_INSTALLED_TESTS_TRUE@ $(installed_test_scripts) \ |
| @ENABLE_INSTALLED_TESTS_TRUE@ $(test_extra_scripts) \ |
| @ENABLE_INSTALLED_TESTS_TRUE@ $(test_installed_extra_scripts) \ |
| @ENABLE_INSTALLED_TESTS_TRUE@ $(dist_test_scripts) \ |
| @ENABLE_INSTALLED_TESTS_TRUE@ $(dist_test_extra_scripts) \ |
| @ENABLE_INSTALLED_TESTS_TRUE@ $(dist_installed_test_scripts) \ |
| @ENABLE_INSTALLED_TESTS_TRUE@ $(dist_installed_test_extra_scripts) |
| @ENABLE_INSTALLED_TESTS_TRUE@am__append_12 = $(test_data) \ |
| @ENABLE_INSTALLED_TESTS_TRUE@ $(installed_test_data) \ |
| @ENABLE_INSTALLED_TESTS_TRUE@ $(dist_test_data) \ |
| @ENABLE_INSTALLED_TESTS_TRUE@ $(dist_installed_test_data) |
| @ENABLE_INSTALLED_TESTS_TRUE@am__append_13 = $(test_ltlibraries) $(installed_test_ltlibraries) |
| @ENABLE_INSTALLED_TESTS_TRUE@am__append_14 = $(installed_test_meta_DATA) |
| @OS_LINUX_TRUE@am__append_15 = check-abis.sh |
| @OS_UNIX_TRUE@am__append_16 = gio-unix-2.0.pc |
| @OS_WIN32_TRUE@am__append_17 = gio-windows-2.0.pc |
| subdir = . |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/m4macros/attributes.m4 \ |
| $(top_srcdir)/m4macros/glibtests.m4 \ |
| $(top_srcdir)/m4macros/gtk-doc.m4 \ |
| $(top_srcdir)/m4macros/libtool.m4 \ |
| $(top_srcdir)/m4macros/ltoptions.m4 \ |
| $(top_srcdir)/m4macros/ltsugar.m4 \ |
| $(top_srcdir)/m4macros/ltversion.m4 \ |
| $(top_srcdir)/m4macros/lt~obsolete.m4 \ |
| $(top_srcdir)/acinclude.m4 $(top_srcdir)/acglib.m4 \ |
| $(top_srcdir)/glib/libcharset/codeset.m4 \ |
| $(top_srcdir)/glib/libcharset/glibc21.m4 \ |
| $(top_srcdir)/m4macros/glib-gettext.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ |
| $(am__configure_deps) $(am__DIST_COMMON) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno config.status.lineno |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = config.h |
| CONFIG_CLEAN_FILES = glib-2.0.pc gmodule-2.0.pc gmodule-export-2.0.pc \ |
| gmodule-no-export-2.0.pc gthread-2.0.pc gobject-2.0.pc \ |
| gio-2.0.pc gio-unix-2.0.pc gio-windows-2.0.pc glib-zip \ |
| glib-gettextize INSTALL README config.h.win32 |
| CONFIG_CLEAN_VPATH_FILES = |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| am__uninstall_files_from_dir = { \ |
| test -z "$$files" \ |
| || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
| || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
| $(am__cd) "$$dir" && rm -f $$files; }; \ |
| } |
| am__installdirs = "$(DESTDIR)$(installed_testdir)" \ |
| "$(DESTDIR)$(installed_testdir)" "$(DESTDIR)$(bindir)" \ |
| "$(DESTDIR)$(installed_testdir)" \ |
| "$(DESTDIR)$(installed_test_metadir)" \ |
| "$(DESTDIR)$(installed_testdir)" "$(DESTDIR)$(pkgconfigdir)" |
| LTLIBRARIES = $(installed_test_LTLIBRARIES) $(noinst_LTLIBRARIES) |
| am__EXEEXT_1 = |
| @ENABLE_ALWAYS_BUILD_TESTS_FALSE@am__EXEEXT_2 = $(am__EXEEXT_1) |
| @ENABLE_ALWAYS_BUILD_TESTS_TRUE@am__EXEEXT_3 = $(am__EXEEXT_1) |
| PROGRAMS = $(installed_test_PROGRAMS) $(noinst_PROGRAMS) |
| SCRIPTS = $(bin_SCRIPTS) $(installed_test_SCRIPTS) $(noinst_SCRIPTS) |
| AM_V_P = $(am__v_P_@AM_V@) |
| am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) |
| am__v_P_0 = false |
| am__v_P_1 = : |
| AM_V_GEN = $(am__v_GEN_@AM_V@) |
| am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) |
| am__v_GEN_0 = @echo " GEN " $@; |
| am__v_GEN_1 = |
| AM_V_at = $(am__v_at_@AM_V@) |
| am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) |
| am__v_at_0 = @ |
| am__v_at_1 = |
| SOURCES = |
| DIST_SOURCES = |
| RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ |
| ctags-recursive dvi-recursive html-recursive info-recursive \ |
| install-data-recursive install-dvi-recursive \ |
| install-exec-recursive install-html-recursive \ |
| install-info-recursive install-pdf-recursive \ |
| install-ps-recursive install-recursive installcheck-recursive \ |
| installdirs-recursive pdf-recursive ps-recursive \ |
| tags-recursive uninstall-recursive |
| am__can_run_installinfo = \ |
| case $$AM_UPDATE_INFO_DIR in \ |
| n|no|NO) false;; \ |
| *) (install-info --version) >/dev/null 2>&1;; \ |
| esac |
| DATA = $(installed_test_meta_DATA) $(nobase_installed_test_DATA) \ |
| $(noinst_DATA) $(pkgconfig_DATA) |
| RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| distclean-recursive maintainer-clean-recursive |
| am__recursive_targets = \ |
| $(RECURSIVE_TARGETS) \ |
| $(RECURSIVE_CLEAN_TARGETS) \ |
| $(am__extra_recursive_targets) |
| AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ |
| cscope check recheck distdir dist dist-all distcheck |
| am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ |
| $(LISP)config.h.in |
| # Read a list of newline-separated strings from the standard input, |
| # and print each of them once, without duplicates. Input order is |
| # *not* preserved. |
| am__uniquify_input = $(AWK) '\ |
| BEGIN { nonempty = 0; } \ |
| { items[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in items) print i; }; } \ |
| ' |
| # Make sure the list of sources is unique. This is necessary because, |
| # e.g., the same source file might be shared among _SOURCES variables |
| # for different programs/libraries. |
| am__define_uniq_tagged_files = \ |
| list='$(am__tagged_files)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | $(am__uniquify_input)` |
| ETAGS = etags |
| CTAGS = ctags |
| CSCOPE = cscope |
| am__tty_colors_dummy = \ |
| mgn= red= grn= lgn= blu= brg= std=; \ |
| am__color_tests=no |
| am__tty_colors = { \ |
| $(am__tty_colors_dummy); \ |
| if test "X$(AM_COLOR_TESTS)" = Xno; then \ |
| am__color_tests=no; \ |
| elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ |
| am__color_tests=yes; \ |
| elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ |
| am__color_tests=yes; \ |
| fi; \ |
| if test $$am__color_tests = yes; then \ |
| red='[0;31m'; \ |
| grn='[0;32m'; \ |
| lgn='[1;32m'; \ |
| blu='[1;34m'; \ |
| mgn='[0;35m'; \ |
| brg='[1m'; \ |
| std='[m'; \ |
| fi; \ |
| } |
| am__recheck_rx = ^[ ]*:recheck:[ ]* |
| am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* |
| am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* |
| # A command that, given a newline-separated list of test names on the |
| # standard input, print the name of the tests that are to be re-run |
| # upon "make recheck". |
| am__list_recheck_tests = $(AWK) '{ \ |
| recheck = 1; \ |
| while ((rc = (getline line < ($$0 ".trs"))) != 0) \ |
| { \ |
| if (rc < 0) \ |
| { \ |
| if ((getline line2 < ($$0 ".log")) < 0) \ |
| recheck = 0; \ |
| break; \ |
| } \ |
| else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ |
| { \ |
| recheck = 0; \ |
| break; \ |
| } \ |
| else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ |
| { \ |
| break; \ |
| } \ |
| }; \ |
| if (recheck) \ |
| print $$0; \ |
| close ($$0 ".trs"); \ |
| close ($$0 ".log"); \ |
| }' |
| # A command that, given a newline-separated list of test names on the |
| # standard input, create the global log from their .trs and .log files. |
| am__create_global_log = $(AWK) ' \ |
| function fatal(msg) \ |
| { \ |
| print "fatal: making $@: " msg | "cat >&2"; \ |
| exit 1; \ |
| } \ |
| function rst_section(header) \ |
| { \ |
| print header; \ |
| len = length(header); \ |
| for (i = 1; i <= len; i = i + 1) \ |
| printf "="; \ |
| printf "\n\n"; \ |
| } \ |
| { \ |
| copy_in_global_log = 1; \ |
| global_test_result = "RUN"; \ |
| while ((rc = (getline line < ($$0 ".trs"))) != 0) \ |
| { \ |
| if (rc < 0) \ |
| fatal("failed to read from " $$0 ".trs"); \ |
| if (line ~ /$(am__global_test_result_rx)/) \ |
| { \ |
| sub("$(am__global_test_result_rx)", "", line); \ |
| sub("[ ]*$$", "", line); \ |
| global_test_result = line; \ |
| } \ |
| else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ |
| copy_in_global_log = 0; \ |
| }; \ |
| if (copy_in_global_log) \ |
| { \ |
| rst_section(global_test_result ": " $$0); \ |
| while ((rc = (getline line < ($$0 ".log"))) != 0) \ |
| { \ |
| if (rc < 0) \ |
| fatal("failed to read from " $$0 ".log"); \ |
| print line; \ |
| }; \ |
| printf "\n"; \ |
| }; \ |
| close ($$0 ".trs"); \ |
| close ($$0 ".log"); \ |
| }' |
| # Restructured Text title. |
| am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } |
| # Solaris 10 'make', and several other traditional 'make' implementations, |
| # pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it |
| # by disabling -e (using the XSI extension "set +e") if it's set. |
| am__sh_e_setup = case $$- in *e*) set +e;; esac |
| # Default flags passed to test drivers. |
| am__common_driver_flags = \ |
| --color-tests "$$am__color_tests" \ |
| --enable-hard-errors "$$am__enable_hard_errors" \ |
| --expect-failure "$$am__expect_failure" |
| # To be inserted before the command running the test. Creates the |
| # directory for the log if needed. Stores in $dir the directory |
| # containing $f, in $tst the test, in $log the log. Executes the |
| # developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and |
| # passes TESTS_ENVIRONMENT. Set up options for the wrapper that |
| # will run the test scripts (or their associated LOG_COMPILER, if |
| # thy have one). |
| am__check_pre = \ |
| $(am__sh_e_setup); \ |
| $(am__vpath_adj_setup) $(am__vpath_adj) \ |
| $(am__tty_colors); \ |
| srcdir=$(srcdir); export srcdir; \ |
| case "$@" in \ |
| */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ |
| *) am__odir=.;; \ |
| esac; \ |
| test "x$$am__odir" = x"." || test -d "$$am__odir" \ |
| || $(MKDIR_P) "$$am__odir" || exit $$?; \ |
| if test -f "./$$f"; then dir=./; \ |
| elif test -f "$$f"; then dir=; \ |
| else dir="$(srcdir)/"; fi; \ |
| tst=$$dir$$f; log='$@'; \ |
| if test -n '$(DISABLE_HARD_ERRORS)'; then \ |
| am__enable_hard_errors=no; \ |
| else \ |
| am__enable_hard_errors=yes; \ |
| fi; \ |
| case " $(XFAIL_TESTS) " in \ |
| *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ |
| am__expect_failure=yes;; \ |
| *) \ |
| am__expect_failure=no;; \ |
| esac; \ |
| $(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) |
| # A shell command to get the names of the tests scripts with any registered |
| # extension removed (i.e., equivalently, the names of the test logs, with |
| # the '.log' extension removed). The result is saved in the shell variable |
| # '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, |
| # we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", |
| # since that might cause problem with VPATH rewrites for suffix-less tests. |
| # See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. |
| am__set_TESTS_bases = \ |
| bases='$(TEST_LOGS)'; \ |
| bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ |
| bases=`echo $$bases` |
| RECHECK_LOGS = $(TEST_LOGS) |
| TEST_SUITE_LOG = test-suite.log |
| TEST_EXTENSIONS = @EXEEXT@ .test |
| LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver |
| LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS) |
| am__set_b = \ |
| case '$@' in \ |
| */*) \ |
| case '$*' in \ |
| */*) b='$*';; \ |
| *) b=`echo '$@' | sed 's/\.log$$//'`; \ |
| esac;; \ |
| *) \ |
| b='$*';; \ |
| esac |
| am__test_logs1 = $(TESTS:=.log) |
| am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) |
| TEST_LOGS = $(am__test_logs2:.test.log=.log) |
| TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver |
| TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ |
| $(TEST_LOG_FLAGS) |
| am__DIST_COMMON = $(srcdir)/INSTALL.in $(srcdir)/Makefile.in \ |
| $(srcdir)/README.in $(srcdir)/config.h.in \ |
| $(srcdir)/config.h.win32.in $(srcdir)/gio-2.0.pc.in \ |
| $(srcdir)/gio-unix-2.0.pc.in $(srcdir)/gio-windows-2.0.pc.in \ |
| $(srcdir)/glib-2.0.pc.in $(srcdir)/glib-gettextize.in \ |
| $(srcdir)/glib-zip.in $(srcdir)/gmodule-2.0.pc.in \ |
| $(srcdir)/gmodule-export-2.0.pc.in \ |
| $(srcdir)/gmodule-no-export-2.0.pc.in \ |
| $(srcdir)/gobject-2.0.pc.in $(srcdir)/gthread-2.0.pc.in \ |
| $(top_srcdir)/glib.mk AUTHORS COPYING ChangeLog INSTALL NEWS \ |
| README compile config.guess config.sub install-sh ltmain.sh \ |
| missing test-driver |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| distdir = $(PACKAGE)-$(VERSION) |
| top_distdir = $(distdir) |
| am__remove_distdir = \ |
| if test -d "$(distdir)"; then \ |
| find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| && rm -rf "$(distdir)" \ |
| || { sleep 5 && rm -rf "$(distdir)"; }; \ |
| else :; fi |
| am__post_remove_distdir = $(am__remove_distdir) |
| am__relativize = \ |
| dir0=`pwd`; \ |
| sed_first='s,^\([^/]*\)/.*$$,\1,'; \ |
| sed_rest='s,^[^/]*/*,,'; \ |
| sed_last='s,^.*/\([^/]*\)$$,\1,'; \ |
| sed_butlast='s,/*[^/]*$$,,'; \ |
| while test -n "$$dir1"; do \ |
| first=`echo "$$dir1" | sed -e "$$sed_first"`; \ |
| if test "$$first" != "."; then \ |
| if test "$$first" = ".."; then \ |
| dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ |
| dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ |
| else \ |
| first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ |
| if test "$$first2" = "$$first"; then \ |
| dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ |
| else \ |
| dir2="../$$dir2"; \ |
| fi; \ |
| dir0="$$dir0"/"$$first"; \ |
| fi; \ |
| fi; \ |
| dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ |
| done; \ |
| reldir="$$dir2" |
| GZIP_ENV = --best |
| DIST_ARCHIVES = $(distdir).tar.xz |
| DIST_TARGETS = dist-xz |
| distuninstallcheck_listfiles = find . -type f -print |
| am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ |
| | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' |
| distcleancheck_listfiles = find . -type f -print |
| ABS_TAPSET_DIR = @ABS_TAPSET_DIR@ |
| ACLOCAL = @ACLOCAL@ |
| ALLOCA = @ALLOCA@ |
| AMTAR = @AMTAR@ |
| AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ |
| AR = @AR@ |
| AS = @AS@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| CARBON_LIBS = @CARBON_LIBS@ |
| CATALOGS = @CATALOGS@ |
| CATOBJEXT = @CATOBJEXT@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| COCOA_LIBS = @COCOA_LIBS@ |
| CONFIG_STATUS_DEPENDENCIES = @CONFIG_STATUS_DEPENDENCIES@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXDEPMODE = @CXXDEPMODE@ |
| CXXFLAGS = @CXXFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DATADIRNAME = @DATADIRNAME@ |
| DBUS1_CFLAGS = @DBUS1_CFLAGS@ |
| DBUS1_LIBS = @DBUS1_LIBS@ |
| DBUS_DAEMON = @DBUS_DAEMON@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DLLTOOL = @DLLTOOL@ |
| DSYMUTIL = @DSYMUTIL@ |
| DTRACE = @DTRACE@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| FAM_LIBS = @FAM_LIBS@ |
| FGREP = @FGREP@ |
| GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ |
| GIO = @GIO@ |
| GIO_MODULE_DIR = @GIO_MODULE_DIR@ |
| GLIBC21 = @GLIBC21@ |
| GLIB_BINARY_AGE = @GLIB_BINARY_AGE@ |
| GLIB_DEBUG_FLAGS = @GLIB_DEBUG_FLAGS@ |
| GLIB_EXTRA_CFLAGS = @GLIB_EXTRA_CFLAGS@ |
| GLIB_HIDDEN_VISIBILITY_CFLAGS = @GLIB_HIDDEN_VISIBILITY_CFLAGS@ |
| GLIB_INTERFACE_AGE = @GLIB_INTERFACE_AGE@ |
| GLIB_LINK_FLAGS = @GLIB_LINK_FLAGS@ |
| GLIB_MAJOR_VERSION = @GLIB_MAJOR_VERSION@ |
| GLIB_MICRO_VERSION = @GLIB_MICRO_VERSION@ |
| GLIB_MINOR_VERSION = @GLIB_MINOR_VERSION@ |
| GLIB_RUNTIME_LIBDIR = @GLIB_RUNTIME_LIBDIR@ |
| GLIB_VERSION = @GLIB_VERSION@ |
| GLIB_WARN_CFLAGS = @GLIB_WARN_CFLAGS@ |
| GLIB_WIN32_STATIC_COMPILATION_DEFINE = @GLIB_WIN32_STATIC_COMPILATION_DEFINE@ |
| GMOFILES = @GMOFILES@ |
| GMSGFMT = @GMSGFMT@ |
| GREP = @GREP@ |
| GSPAWN = @GSPAWN@ |
| GTHREAD_COMPILE_IMPL_DEFINES = @GTHREAD_COMPILE_IMPL_DEFINES@ |
| GTKDOC_CHECK = @GTKDOC_CHECK@ |
| GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ |
| GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ |
| GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ |
| GTKDOC_MKPDF = @GTKDOC_MKPDF@ |
| GTKDOC_REBASE = @GTKDOC_REBASE@ |
| G_LIBS_EXTRA = @G_LIBS_EXTRA@ |
| G_MODULE_BROKEN_RTLD_GLOBAL = @G_MODULE_BROKEN_RTLD_GLOBAL@ |
| G_MODULE_HAVE_DLERROR = @G_MODULE_HAVE_DLERROR@ |
| G_MODULE_IMPL = @G_MODULE_IMPL@ |
| G_MODULE_LDFLAGS = @G_MODULE_LDFLAGS@ |
| G_MODULE_LIBS = @G_MODULE_LIBS@ |
| G_MODULE_LIBS_EXTRA = @G_MODULE_LIBS_EXTRA@ |
| G_MODULE_NEED_USCORE = @G_MODULE_NEED_USCORE@ |
| G_MODULE_PLUGIN_LIBS = @G_MODULE_PLUGIN_LIBS@ |
| G_MODULE_SUPPORTED = @G_MODULE_SUPPORTED@ |
| G_THREAD_CFLAGS = @G_THREAD_CFLAGS@ |
| G_THREAD_LIBS = @G_THREAD_LIBS@ |
| G_THREAD_LIBS_EXTRA = @G_THREAD_LIBS_EXTRA@ |
| G_THREAD_LIBS_FOR_GTHREAD = @G_THREAD_LIBS_FOR_GTHREAD@ |
| HTML_DIR = @HTML_DIR@ |
| ICONV_LIBS = @ICONV_LIBS@ |
| INDENT = @INDENT@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| INSTOBJEXT = @INSTOBJEXT@ |
| INTLLIBS = @INTLLIBS@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBELF_CFLAGS = @LIBELF_CFLAGS@ |
| LIBELF_LIBS = @LIBELF_LIBS@ |
| LIBFFI_CFLAGS = @LIBFFI_CFLAGS@ |
| LIBFFI_LIBS = @LIBFFI_LIBS@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBSYSTEMD_CFLAGS = @LIBSYSTEMD_CFLAGS@ |
| LIBSYSTEMD_LIBS = @LIBSYSTEMD_LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIB_EXE_MACHINE_FLAG = @LIB_EXE_MACHINE_FLAG@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| LTP = @LTP@ |
| LTP_GENHTML = @LTP_GENHTML@ |
| LT_AGE = @LT_AGE@ |
| LT_CURRENT = @LT_CURRENT@ |
| LT_CURRENT_MINUS_AGE = @LT_CURRENT_MINUS_AGE@ |
| LT_RELEASE = @LT_RELEASE@ |
| LT_REVISION = @LT_REVISION@ |
| LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MANIFEST_TOOL = @MANIFEST_TOOL@ |
| MKDIR_P = @MKDIR_P@ |
| MKINSTALLDIRS = @MKINSTALLDIRS@ |
| MSGFMT = @MSGFMT@ |
| MSGFMT_OPTS = @MSGFMT_OPTS@ |
| NAMESER_COMPAT_INCLUDE = @NAMESER_COMPAT_INCLUDE@ |
| NETWORK_LIBS = @NETWORK_LIBS@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PCRE_CFLAGS = @PCRE_CFLAGS@ |
| PCRE_LIBS = @PCRE_LIBS@ |
| PCRE_REQUIRES = @PCRE_REQUIRES@ |
| PCRE_WARN_CFLAGS = @PCRE_WARN_CFLAGS@ |
| PERL = @PERL@ |
| PERL_PATH = @PERL_PATH@ |
| PKG_CONFIG = @PKG_CONFIG@ |
| PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ |
| PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ |
| PLATFORMDEP = @PLATFORMDEP@ |
| POFILES = @POFILES@ |
| POSUB = @POSUB@ |
| PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ |
| PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ |
| PYTHON = @PYTHON@ |
| PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ |
| PYTHON_PLATFORM = @PYTHON_PLATFORM@ |
| PYTHON_PREFIX = @PYTHON_PREFIX@ |
| PYTHON_VERSION = @PYTHON_VERSION@ |
| RANLIB = @RANLIB@ |
| REBUILD = @REBUILD@ |
| SED = @SED@ |
| SELINUX_LIBS = @SELINUX_LIBS@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| SHTOOL = @SHTOOL@ |
| STRIP = @STRIP@ |
| USE_NLS = @USE_NLS@ |
| VERSION = @VERSION@ |
| WINDRES = @WINDRES@ |
| WSPIAPI_INCLUDE = @WSPIAPI_INCLUDE@ |
| XATTR_LIBS = @XATTR_LIBS@ |
| XGETTEXT = @XGETTEXT@ |
| XMLCATALOG = @XMLCATALOG@ |
| XML_CATALOG_FILE = @XML_CATALOG_FILE@ |
| XSLTPROC = @XSLTPROC@ |
| ZLIB_CFLAGS = @ZLIB_CFLAGS@ |
| ZLIB_LIBS = @ZLIB_LIBS@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| config_h_INCLUDES = @config_h_INCLUDES@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| gio_INCLUDES = @gio_INCLUDES@ |
| glib_INCLUDES = @glib_INCLUDES@ |
| gmodule_INCLUDES = @gmodule_INCLUDES@ |
| gobject_INCLUDES = @gobject_INCLUDES@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| installed_test_metadir = @installed_test_metadir@ |
| installed_testdir = @installed_testdir@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| ms_librarian = @ms_librarian@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| pkgpyexecdir = @pkgpyexecdir@ |
| pkgpythondir = @pkgpythondir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| pyexecdir = @pyexecdir@ |
| pythondir = @pythondir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target_alias = @target_alias@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| |
| #GTESTER = gtester # for non-GLIB packages |
| #GTESTER_REPORT = gtester-report # for non-GLIB packages |
| GTESTER = $(top_builddir)/glib/gtester # for the GLIB package |
| GTESTER_REPORT = $(top_builddir)/glib/gtester-report # for the GLIB package |
| NULL = |
| |
| # initialize variables for unconditional += appending |
| BUILT_SOURCES = |
| |
| # These may be in the builddir too |
| BUILT_EXTRA_DIST = README INSTALL ChangeLog config.h.win32 $(NULL) |
| CLEANFILES = *.log *.trs $(am__append_14) |
| DISTCLEANFILES = config.lt |
| MAINTAINERCLEANFILES = |
| EXTRA_DIST = $(all_dist_test_scripts) $(all_dist_test_data) \ |
| ChangeLog.pre-2-20 ChangeLog.pre-2-18 ChangeLog.pre-2-16 \ |
| ChangeLog.pre-2-14 ChangeLog.pre-2-12 ChangeLog.pre-2-10 \ |
| ChangeLog.pre-2-8 ChangeLog.pre-2-6 ChangeLog.pre-2-4 \ |
| ChangeLog.pre-2-2 ChangeLog.pre-2-0 ChangeLog.pre-1-2 \ |
| glib-zip.in NEWS.pre-1-3 acglib.m4 sanity_check README.commits \ |
| README.in README.rationale INSTALL.in README.win32 HACKING \ |
| autogen.sh glib.mk glib-tap.mk tap-driver.sh tap-test \ |
| makefile.msc msvc_recommended_pragmas.h config.h.win32.in \ |
| po/po2tbl.sed.in glib-2.0.pc.in gobject-2.0.pc.in \ |
| gmodule-2.0.pc.in gmodule-export-2.0.pc.in \ |
| gmodule-no-export-2.0.pc.in gthread-2.0.pc.in gio-2.0.pc.in \ |
| gio-unix-2.0.pc.in gio-windows-2.0.pc.in check-abis.sh \ |
| gtk-doc.make $(NULL) |
| |
| # We support a fairly large range of possible variables. It is expected that all types of files in a test suite |
| # will belong in exactly one of the following variables. |
| # |
| # First, we support the usual automake suffixes, but in lowercase, with the customary meaning: |
| # |
| # test_programs, test_scripts, test_data, test_ltlibraries |
| # |
| # The above are used to list files that are involved in both uninstalled and installed testing. The |
| # test_programs and test_scripts are taken to be actual testcases and will be run as part of the test suite. |
| # Note that _data is always used with the nobase_ automake variable name to ensure that installed test data is |
| # installed in the same way as it appears in the package layout. |
| # |
| # In order to mark a particular file as being only for one type of testing, use 'installed' or 'uninstalled', |
| # like so: |
| # |
| # installed_test_programs, uninstalled_test_programs |
| # installed_test_scripts, uninstalled_test_scripts |
| # installed_test_data, uninstalled_test_data |
| # installed_test_ltlibraries, uninstalled_test_ltlibraries |
| # |
| # Additionally, we support 'extra' infixes for programs and scripts. This is used for support programs/scripts |
| # that should not themselves be run as testcases (but exist to be used from other testcases): |
| # |
| # test_extra_programs, installed_test_extra_programs, uninstalled_test_extra_programs |
| # test_extra_scripts, installed_test_extra_scripts, uninstalled_test_extra_scripts |
| # |
| # Additionally, for _scripts and _data, we support the customary dist_ prefix so that the named script or data |
| # file automatically end up in the tarball. |
| # |
| # dist_test_scripts, dist_test_data, dist_test_extra_scripts |
| # dist_installed_test_scripts, dist_installed_test_data, dist_installed_test_extra_scripts |
| # dist_uninstalled_test_scripts, dist_uninstalled_test_data, dist_uninstalled_test_extra_scripts |
| # |
| # Note that no file is automatically disted unless it appears in one of the dist_ variables. This follows the |
| # standard automake convention of not disting programs scripts or data by default. |
| # |
| # test_programs, test_scripts, uninstalled_test_programs and uninstalled_test_scripts (as well as their disted |
| # variants) will be run as part of the in-tree 'make check'. These are all assumed to be runnable under |
| # gtester. That's a bit strange for scripts, but it's possible. |
| |
| # we use test -z "$(TEST_PROGS)" above, so make sure we have no extra whitespace... |
| TEST_PROGS = $(strip $(test_programs) $(test_scripts) \ |
| $(uninstalled_test_programs) $(uninstalled_test_scripts) \ |
| $(dist_test_scripts) $(dist_uninstalled_test_scripts)) |
| installed_test_LTLIBRARIES = $(am__append_13) |
| installed_test_SCRIPTS = $(am__append_11) |
| nobase_installed_test_DATA = $(am__append_12) |
| noinst_LTLIBRARIES = $(am__append_2) |
| noinst_SCRIPTS = $(am__append_4) |
| noinst_DATA = $(am__append_5) |
| check_LTLIBRARIES = $(am__append_6) |
| check_SCRIPTS = $(am__append_8) |
| check_DATA = $(am__append_9) |
| |
| # Note: build even the installed-only targets during 'make check' to ensure that they still work. |
| # We need to do a bit of trickery here and manage disting via EXTRA_DIST instead of using dist_ prefixes to |
| # prevent automake from mistreating gmake functions like $(wildcard ...) and $(addprefix ...) as if they were |
| # filenames, including removing duplicate instances of the opening part before the space, eg. '$(addprefix'. |
| all_test_programs = $(test_programs) $(uninstalled_test_programs) $(installed_test_programs) \ |
| $(test_extra_programs) $(uninstalled_test_extra_programs) $(installed_test_extra_programs) |
| |
| all_test_scripts = $(test_scripts) $(uninstalled_test_scripts) \ |
| $(installed_test_scripts) $(test_extra_scripts) \ |
| $(uninstalled_test_extra_scripts) \ |
| $(installed_test_extra_scripts) $(all_dist_test_scripts) |
| all_dist_test_scripts = $(dist_test_scripts) $(dist_uninstalled_test_scripts) $(dist_installed_test_scripts) \ |
| $(dist_test_extra_scripts) $(dist_uninstalled_test_extra_scripts) $(dist_installed_test_extra_scripts) |
| |
| all_test_data = $(test_data) $(uninstalled_test_data) \ |
| $(installed_test_data) $(all_dist_test_data) |
| all_dist_test_data = $(dist_test_data) $(dist_uninstalled_test_data) $(dist_installed_test_data) |
| all_test_ltlibs = $(test_ltlibraries) $(uninstalled_test_ltlibraries) $(installed_test_ltlibraries) |
| @ENABLE_INSTALLED_TESTS_TRUE@installed_testcases = $(test_programs) $(installed_test_programs) \ |
| @ENABLE_INSTALLED_TESTS_TRUE@ $(test_scripts) $(installed_test_scripts) \ |
| @ENABLE_INSTALLED_TESTS_TRUE@ $(dist_test_scripts) $(dist_installed_test_scripts) |
| |
| @ENABLE_INSTALLED_TESTS_TRUE@installed_test_meta_DATA = $(installed_testcases:=.test) |
| ACLOCAL_AMFLAGS = -I m4macros ${ACLOCAL_FLAGS} |
| SUBDIRS = . m4macros glib gmodule gthread gobject gio po docs tests |
| DIST_SUBDIRS = $(SUBDIRS) build |
| bin_SCRIPTS = glib-gettextize |
| AM_CPPFLAGS = \ |
| -DG_LOG_DOMAIN=g_log_domain_glib \ |
| @GLIB_DEBUG_FLAGS@ \ |
| -DG_DISABLE_DEPRECATED \ |
| -DGLIB_COMPILATION |
| |
| CONFIGURE_DEPENDENCIES = acglib.m4 |
| pkgconfigdir = $(libdir)/pkgconfig |
| pkgconfig_DATA = glib-2.0.pc gobject-2.0.pc gmodule-2.0.pc \ |
| gmodule-export-2.0.pc gmodule-no-export-2.0.pc gthread-2.0.pc \ |
| gio-2.0.pc $(am__append_16) $(am__append_17) |
| |
| # build documentation when doing distcheck |
| DISTCHECK_CONFIGURE_FLAGS = --enable-debug --enable-gtk-doc --enable-man --disable-maintainer-mode |
| all: $(BUILT_SOURCES) config.h |
| $(MAKE) $(AM_MAKEFLAGS) all-recursive |
| |
| .SUFFIXES: |
| .SUFFIXES: .log .test .test$(EXEEXT) .trs |
| am--refresh: Makefile |
| @: |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/glib.mk $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ |
| $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --gnu Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
| esac; |
| $(top_srcdir)/glib.mk $(am__empty): |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| $(am__cd) $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| $(am__aclocal_m4_deps): |
| |
| config.h: stamp-h1 |
| @test -f $@ || rm -f stamp-h1 |
| @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 |
| |
| stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status |
| @rm -f stamp-h1 |
| cd $(top_builddir) && $(SHELL) ./config.status config.h |
| $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) |
| rm -f stamp-h1 |
| touch $@ |
| |
| distclean-hdr: |
| -rm -f config.h stamp-h1 |
| glib-2.0.pc: $(top_builddir)/config.status $(srcdir)/glib-2.0.pc.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| gmodule-2.0.pc: $(top_builddir)/config.status $(srcdir)/gmodule-2.0.pc.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| gmodule-export-2.0.pc: $(top_builddir)/config.status $(srcdir)/gmodule-export-2.0.pc.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| gmodule-no-export-2.0.pc: $(top_builddir)/config.status $(srcdir)/gmodule-no-export-2.0.pc.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| gthread-2.0.pc: $(top_builddir)/config.status $(srcdir)/gthread-2.0.pc.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| gobject-2.0.pc: $(top_builddir)/config.status $(srcdir)/gobject-2.0.pc.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| gio-2.0.pc: $(top_builddir)/config.status $(srcdir)/gio-2.0.pc.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| gio-unix-2.0.pc: $(top_builddir)/config.status $(srcdir)/gio-unix-2.0.pc.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| gio-windows-2.0.pc: $(top_builddir)/config.status $(srcdir)/gio-windows-2.0.pc.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| glib-zip: $(top_builddir)/config.status $(srcdir)/glib-zip.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| glib-gettextize: $(top_builddir)/config.status $(srcdir)/glib-gettextize.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| INSTALL: $(top_builddir)/config.status $(srcdir)/INSTALL.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| README: $(top_builddir)/config.status $(srcdir)/README.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| config.h.win32: $(top_builddir)/config.status $(srcdir)/config.h.win32.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| |
| clean-checkLTLIBRARIES: |
| -test -z "$(check_LTLIBRARIES)" || rm -f $(check_LTLIBRARIES) |
| @list='$(check_LTLIBRARIES)'; \ |
| locs=`for p in $$list; do echo $$p; done | \ |
| sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ |
| sort -u`; \ |
| test -z "$$locs" || { \ |
| echo rm -f $${locs}; \ |
| rm -f $${locs}; \ |
| } |
| |
| install-installed_testLTLIBRARIES: $(installed_test_LTLIBRARIES) |
| @$(NORMAL_INSTALL) |
| @list='$(installed_test_LTLIBRARIES)'; test -n "$(installed_testdir)" || list=; \ |
| list2=; for p in $$list; do \ |
| if test -f $$p; then \ |
| list2="$$list2 $$p"; \ |
| else :; fi; \ |
| done; \ |
| test -z "$$list2" || { \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(installed_testdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(installed_testdir)" || exit 1; \ |
| echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(installed_testdir)'"; \ |
| $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(installed_testdir)"; \ |
| } |
| |
| uninstall-installed_testLTLIBRARIES: |
| @$(NORMAL_UNINSTALL) |
| @list='$(installed_test_LTLIBRARIES)'; test -n "$(installed_testdir)" || list=; \ |
| for p in $$list; do \ |
| $(am__strip_dir) \ |
| echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(installed_testdir)/$$f'"; \ |
| $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(installed_testdir)/$$f"; \ |
| done |
| |
| clean-installed_testLTLIBRARIES: |
| -test -z "$(installed_test_LTLIBRARIES)" || rm -f $(installed_test_LTLIBRARIES) |
| @list='$(installed_test_LTLIBRARIES)'; \ |
| locs=`for p in $$list; do echo $$p; done | \ |
| sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ |
| sort -u`; \ |
| test -z "$$locs" || { \ |
| echo rm -f $${locs}; \ |
| rm -f $${locs}; \ |
| } |
| |
| clean-noinstLTLIBRARIES: |
| -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) |
| @list='$(noinst_LTLIBRARIES)'; \ |
| locs=`for p in $$list; do echo $$p; done | \ |
| sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ |
| sort -u`; \ |
| test -z "$$locs" || { \ |
| echo rm -f $${locs}; \ |
| rm -f $${locs}; \ |
| } |
| |
| clean-checkPROGRAMS: |
| @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ |
| echo " rm -f" $$list; \ |
| rm -f $$list || exit $$?; \ |
| test -n "$(EXEEXT)" || exit 0; \ |
| list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ |
| echo " rm -f" $$list; \ |
| rm -f $$list |
| install-installed_testPROGRAMS: $(installed_test_PROGRAMS) |
| @$(NORMAL_INSTALL) |
| @list='$(installed_test_PROGRAMS)'; test -n "$(installed_testdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(installed_testdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(installed_testdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed 's/$(EXEEXT)$$//' | \ |
| while read p p1; do if test -f $$p \ |
| || test -f $$p1 \ |
| ; then echo "$$p"; echo "$$p"; else :; fi; \ |
| done | \ |
| sed -e 'p;s,.*/,,;n;h' \ |
| -e 's|.*|.|' \ |
| -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ |
| sed 'N;N;N;s,\n, ,g' | \ |
| $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ |
| { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ |
| if ($$2 == $$4) files[d] = files[d] " " $$1; \ |
| else { print "f", $$3 "/" $$4, $$1; } } \ |
| END { for (d in files) print "f", d, files[d] }' | \ |
| while read type dir files; do \ |
| if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ |
| test -z "$$files" || { \ |
| echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(installed_testdir)$$dir'"; \ |
| $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(installed_testdir)$$dir" || exit $$?; \ |
| } \ |
| ; done |
| |
| uninstall-installed_testPROGRAMS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(installed_test_PROGRAMS)'; test -n "$(installed_testdir)" || list=; \ |
| files=`for p in $$list; do echo "$$p"; done | \ |
| sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ |
| -e 's/$$/$(EXEEXT)/' \ |
| `; \ |
| test -n "$$list" || exit 0; \ |
| echo " ( cd '$(DESTDIR)$(installed_testdir)' && rm -f" $$files ")"; \ |
| cd "$(DESTDIR)$(installed_testdir)" && rm -f $$files |
| |
| clean-installed_testPROGRAMS: |
| @list='$(installed_test_PROGRAMS)'; test -n "$$list" || exit 0; \ |
| echo " rm -f" $$list; \ |
| rm -f $$list || exit $$?; \ |
| test -n "$(EXEEXT)" || exit 0; \ |
| list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ |
| echo " rm -f" $$list; \ |
| rm -f $$list |
| |
| clean-noinstPROGRAMS: |
| @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ |
| echo " rm -f" $$list; \ |
| rm -f $$list || exit $$?; \ |
| test -n "$(EXEEXT)" || exit 0; \ |
| list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ |
| echo " rm -f" $$list; \ |
| rm -f $$list |
| install-binSCRIPTS: $(bin_SCRIPTS) |
| @$(NORMAL_INSTALL) |
| @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ |
| done | \ |
| sed -e 'p;s,.*/,,;n' \ |
| -e 'h;s|.*|.|' \ |
| -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ |
| $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ |
| { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ |
| if ($$2 == $$4) { files[d] = files[d] " " $$1; \ |
| if (++n[d] == $(am__install_max)) { \ |
| print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ |
| else { print "f", d "/" $$4, $$1 } } \ |
| END { for (d in files) print "f", d, files[d] }' | \ |
| while read type dir files; do \ |
| if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ |
| test -z "$$files" || { \ |
| echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ |
| $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ |
| } \ |
| ; done |
| |
| uninstall-binSCRIPTS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ |
| files=`for p in $$list; do echo "$$p"; done | \ |
| sed -e 's,.*/,,;$(transform)'`; \ |
| dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir) |
| install-installed_testSCRIPTS: $(installed_test_SCRIPTS) |
| @$(NORMAL_INSTALL) |
| @list='$(installed_test_SCRIPTS)'; test -n "$(installed_testdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(installed_testdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(installed_testdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ |
| done | \ |
| sed -e 'p;s,.*/,,;n' \ |
| -e 'h;s|.*|.|' \ |
| -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ |
| $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ |
| { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ |
| if ($$2 == $$4) { files[d] = files[d] " " $$1; \ |
| if (++n[d] == $(am__install_max)) { \ |
| print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ |
| else { print "f", d "/" $$4, $$1 } } \ |
| END { for (d in files) print "f", d, files[d] }' | \ |
| while read type dir files; do \ |
| if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ |
| test -z "$$files" || { \ |
| echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(installed_testdir)$$dir'"; \ |
| $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(installed_testdir)$$dir" || exit $$?; \ |
| } \ |
| ; done |
| |
| uninstall-installed_testSCRIPTS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(installed_test_SCRIPTS)'; test -n "$(installed_testdir)" || exit 0; \ |
| files=`for p in $$list; do echo "$$p"; done | \ |
| sed -e 's,.*/,,;$(transform)'`; \ |
| dir='$(DESTDIR)$(installed_testdir)'; $(am__uninstall_files_from_dir) |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool config.lt |
| install-installed_test_metaDATA: $(installed_test_meta_DATA) |
| @$(NORMAL_INSTALL) |
| @list='$(installed_test_meta_DATA)'; test -n "$(installed_test_metadir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(installed_test_metadir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(installed_test_metadir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(installed_test_metadir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(installed_test_metadir)" || exit $$?; \ |
| done |
| |
| uninstall-installed_test_metaDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(installed_test_meta_DATA)'; test -n "$(installed_test_metadir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(installed_test_metadir)'; $(am__uninstall_files_from_dir) |
| install-nobase_installed_testDATA: $(nobase_installed_test_DATA) |
| @$(NORMAL_INSTALL) |
| @list='$(nobase_installed_test_DATA)'; test -n "$(installed_testdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(installed_testdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(installed_testdir)" || exit 1; \ |
| fi; \ |
| $(am__nobase_list) | while read dir files; do \ |
| xfiles=; for file in $$files; do \ |
| if test -f "$$file"; then xfiles="$$xfiles $$file"; \ |
| else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \ |
| test -z "$$xfiles" || { \ |
| test "x$$dir" = x. || { \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(installed_testdir)/$$dir'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(installed_testdir)/$$dir"; }; \ |
| echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(installed_testdir)/$$dir'"; \ |
| $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(installed_testdir)/$$dir" || exit $$?; }; \ |
| done |
| |
| uninstall-nobase_installed_testDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(nobase_installed_test_DATA)'; test -n "$(installed_testdir)" || list=; \ |
| $(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \ |
| dir='$(DESTDIR)$(installed_testdir)'; $(am__uninstall_files_from_dir) |
| install-pkgconfigDATA: $(pkgconfig_DATA) |
| @$(NORMAL_INSTALL) |
| @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ |
| done |
| |
| uninstall-pkgconfigDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run 'make' without going through this Makefile. |
| # To change the values of 'make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in 'config.status', edit 'config.status' |
| # (which will cause the Makefiles to be regenerated when you run 'make'); |
| # (2) otherwise, pass the desired values on the 'make' command line. |
| $(am__recursive_targets): |
| @fail=; \ |
| if $(am__make_keepgoing); then \ |
| failcom='fail=yes'; \ |
| else \ |
| failcom='exit 1'; \ |
| fi; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| ID: $(am__tagged_files) |
| $(am__define_uniq_tagged_files); mkid -fID $$unique |
| tags: tags-recursive |
| TAGS: tags |
| |
| tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| set x; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| $(am__define_uniq_tagged_files); \ |
| shift; \ |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| if test $$# -gt 0; then \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| "$$@" $$unique; \ |
| else \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$unique; \ |
| fi; \ |
| fi |
| ctags: ctags-recursive |
| |
| CTAGS: ctags |
| ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| $(am__define_uniq_tagged_files); \ |
| test -z "$(CTAGS_ARGS)$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && $(am__cd) $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) "$$here" |
| cscope: cscope.files |
| test ! -s cscope.files \ |
| || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) |
| clean-cscope: |
| -rm -f cscope.files |
| cscope.files: clean-cscope cscopelist |
| cscopelist: cscopelist-recursive |
| |
| cscopelist-am: $(am__tagged_files) |
| list='$(am__tagged_files)'; \ |
| case "$(srcdir)" in \ |
| [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ |
| *) sdir=$(subdir)/$(srcdir) ;; \ |
| esac; \ |
| for i in $$list; do \ |
| if test -f "$$i"; then \ |
| echo "$(subdir)/$$i"; \ |
| else \ |
| echo "$$sdir/$$i"; \ |
| fi; \ |
| done >> $(top_builddir)/cscope.files |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| -rm -f cscope.out cscope.in.out cscope.po.out cscope.files |
| |
| # Recover from deleted '.trs' file; this should ensure that |
| # "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create |
| # both 'foo.log' and 'foo.trs'. Break the recipe in two subshells |
| # to avoid problems with "make -n". |
| .log.trs: |
| rm -f $< $@ |
| $(MAKE) $(AM_MAKEFLAGS) $< |
| |
| # Leading 'am--fnord' is there to ensure the list of targets does not |
| # expand to empty, as could happen e.g. with make check TESTS=''. |
| am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) |
| am--force-recheck: |
| @: |
| |
| $(TEST_SUITE_LOG): $(TEST_LOGS) |
| @$(am__set_TESTS_bases); \ |
| am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ |
| redo_bases=`for i in $$bases; do \ |
| am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ |
| done`; \ |
| if test -n "$$redo_bases"; then \ |
| redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ |
| redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ |
| if $(am__make_dryrun); then :; else \ |
| rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ |
| fi; \ |
| fi; \ |
| if test -n "$$am__remaking_logs"; then \ |
| echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ |
| "recursion detected" >&2; \ |
| elif test -n "$$redo_logs"; then \ |
| am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ |
| fi; \ |
| if $(am__make_dryrun); then :; else \ |
| st=0; \ |
| errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ |
| for i in $$redo_bases; do \ |
| test -f $$i.trs && test -r $$i.trs \ |
| || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ |
| test -f $$i.log && test -r $$i.log \ |
| || { echo "$$errmsg $$i.log" >&2; st=1; }; \ |
| done; \ |
| test $$st -eq 0 || exit 1; \ |
| fi |
| @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ |
| ws='[ ]'; \ |
| results=`for b in $$bases; do echo $$b.trs; done`; \ |
| test -n "$$results" || results=/dev/null; \ |
| all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ |
| pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ |
| fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ |
| skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ |
| xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ |
| xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ |
| error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ |
| if test `expr $$fail + $$xpass + $$error` -eq 0; then \ |
| success=true; \ |
| else \ |
| success=false; \ |
| fi; \ |
| br='==================='; br=$$br$$br$$br$$br; \ |
| result_count () \ |
| { \ |
| if test x"$$1" = x"--maybe-color"; then \ |
| maybe_colorize=yes; \ |
| elif test x"$$1" = x"--no-color"; then \ |
| maybe_colorize=no; \ |
| else \ |
| echo "$@: invalid 'result_count' usage" >&2; exit 4; \ |
| fi; \ |
| shift; \ |
| desc=$$1 count=$$2; \ |
| if test $$maybe_colorize = yes && test $$count -gt 0; then \ |
| color_start=$$3 color_end=$$std; \ |
| else \ |
| color_start= color_end=; \ |
| fi; \ |
| echo "$${color_start}# $$desc $$count$${color_end}"; \ |
| }; \ |
| create_testsuite_report () \ |
| { \ |
| result_count $$1 "TOTAL:" $$all "$$brg"; \ |
| result_count $$1 "PASS: " $$pass "$$grn"; \ |
| result_count $$1 "SKIP: " $$skip "$$blu"; \ |
| result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ |
| result_count $$1 "FAIL: " $$fail "$$red"; \ |
| result_count $$1 "XPASS:" $$xpass "$$red"; \ |
| result_count $$1 "ERROR:" $$error "$$mgn"; \ |
| }; \ |
| { \ |
| echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ |
| $(am__rst_title); \ |
| create_testsuite_report --no-color; \ |
| echo; \ |
| echo ".. contents:: :depth: 2"; \ |
| echo; \ |
| for b in $$bases; do echo $$b; done \ |
| | $(am__create_global_log); \ |
| } >$(TEST_SUITE_LOG).tmp || exit 1; \ |
| mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ |
| if $$success; then \ |
| col="$$grn"; \ |
| else \ |
| col="$$red"; \ |
| test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ |
| fi; \ |
| echo "$${col}$$br$${std}"; \ |
| echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ |
| echo "$${col}$$br$${std}"; \ |
| create_testsuite_report --maybe-color; \ |
| echo "$$col$$br$$std"; \ |
| if $$success; then :; else \ |
| echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ |
| if test -n "$(PACKAGE_BUGREPORT)"; then \ |
| echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ |
| fi; \ |
| echo "$$col$$br$$std"; \ |
| fi; \ |
| $$success || exit 1 |
| |
| check-TESTS: |
| @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list |
| @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list |
| @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) |
| @set +e; $(am__set_TESTS_bases); \ |
| log_list=`for i in $$bases; do echo $$i.log; done`; \ |
| trs_list=`for i in $$bases; do echo $$i.trs; done`; \ |
| log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ |
| $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ |
| exit $$?; |
| recheck: all $(check_LTLIBRARIES) $(check_PROGRAMS) $(check_SCRIPTS) $(check_DATA) |
| @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) |
| @set +e; $(am__set_TESTS_bases); \ |
| bases=`for i in $$bases; do echo $$i; done \ |
| | $(am__list_recheck_tests)` || exit 1; \ |
| log_list=`for i in $$bases; do echo $$i.log; done`; \ |
| log_list=`echo $$log_list`; \ |
| $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ |
| am__force_recheck=am--force-recheck \ |
| TEST_LOGS="$$log_list"; \ |
| exit $$? |
| check-abis.sh.log: check-abis.sh |
| @p='check-abis.sh'; \ |
| b='check-abis.sh'; \ |
| $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ |
| --log-file $$b.log --trs-file $$b.trs \ |
| $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ |
| "$$tst" $(AM_TESTS_FD_REDIRECT) |
| .test.log: |
| @p='$<'; \ |
| $(am__set_b); \ |
| $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ |
| --log-file $$b.log --trs-file $$b.trs \ |
| $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ |
| "$$tst" $(AM_TESTS_FD_REDIRECT) |
| @am__EXEEXT_TRUE@.test$(EXEEXT).log: |
| @am__EXEEXT_TRUE@ @p='$<'; \ |
| @am__EXEEXT_TRUE@ $(am__set_b); \ |
| @am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ |
| @am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ |
| @am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ |
| @am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) |
| |
| distdir: $(DISTFILES) |
| $(am__remove_distdir) |
| test -d "$(distdir)" || mkdir "$(distdir)" |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| $(am__make_dryrun) \ |
| || test -d "$(distdir)/$$subdir" \ |
| || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ |
| $(am__relativize); \ |
| new_distdir=$$reldir; \ |
| dir1=$$subdir; dir2="$(top_distdir)"; \ |
| $(am__relativize); \ |
| new_top_distdir=$$reldir; \ |
| echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ |
| echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ |
| ($(am__cd) $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$new_top_distdir" \ |
| distdir="$$new_distdir" \ |
| am__remove_distdir=: \ |
| am__skip_length_check=: \ |
| am__skip_mode_fix=: \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
| dist-hook |
| -test -n "$(am__skip_mode_fix)" \ |
| || find "$(distdir)" -type d ! -perm -755 \ |
| -exec chmod u+rwx,go+rx {} \; -o \ |
| ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ |
| || chmod -R a+r "$(distdir)" |
| dist-gzip: distdir |
| tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz |
| $(am__post_remove_distdir) |
| |
| dist-bzip2: distdir |
| tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 |
| $(am__post_remove_distdir) |
| |
| dist-lzip: distdir |
| tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz |
| $(am__post_remove_distdir) |
| dist-xz: distdir |
| tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz |
| $(am__post_remove_distdir) |
| |
| dist-tarZ: distdir |
| @echo WARNING: "Support for distribution archives compressed with" \ |
| "legacy program 'compress' is deprecated." >&2 |
| @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z |
| $(am__post_remove_distdir) |
| |
| dist-shar: distdir |
| @echo WARNING: "Support for shar distribution archives is" \ |
| "deprecated." >&2 |
| @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz |
| $(am__post_remove_distdir) |
| |
| dist-zip: distdir |
| -rm -f $(distdir).zip |
| zip -rq $(distdir).zip $(distdir) |
| $(am__post_remove_distdir) |
| |
| dist dist-all: |
| $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' |
| $(am__post_remove_distdir) |
| |
| # This target untars the dist file and tries a VPATH configuration. Then |
| # it guarantees that the distribution is self-contained by making another |
| # tarfile. |
| distcheck: dist |
| case '$(DIST_ARCHIVES)' in \ |
| *.tar.gz*) \ |
| eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ |
| *.tar.bz2*) \ |
| bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ |
| *.tar.lz*) \ |
| lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ |
| *.tar.xz*) \ |
| xz -dc $(distdir).tar.xz | $(am__untar) ;;\ |
| *.tar.Z*) \ |
| uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ |
| *.shar.gz*) \ |
| eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ |
| *.zip*) \ |
| unzip $(distdir).zip ;;\ |
| esac |
| chmod -R a-w $(distdir) |
| chmod u+w $(distdir) |
| mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst |
| chmod a-w $(distdir) |
| test -d $(distdir)/_build || exit 0; \ |
| dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
| && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| && am__cwd=`pwd` \ |
| && $(am__cd) $(distdir)/_build/sub \ |
| && ../../configure \ |
| $(AM_DISTCHECK_CONFIGURE_FLAGS) \ |
| $(DISTCHECK_CONFIGURE_FLAGS) \ |
| --srcdir=../.. --prefix="$$dc_install_base" \ |
| && $(MAKE) $(AM_MAKEFLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| && $(MAKE) $(AM_MAKEFLAGS) check \ |
| && $(MAKE) $(AM_MAKEFLAGS) install \ |
| && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
| distuninstallcheck \ |
| && chmod -R a-w "$$dc_install_base" \ |
| && ({ \ |
| (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| && rm -rf "$$dc_destdir" \ |
| && $(MAKE) $(AM_MAKEFLAGS) dist \ |
| && rm -rf $(DIST_ARCHIVES) \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ |
| && cd "$$am__cwd" \ |
| || exit 1 |
| $(am__post_remove_distdir) |
| @(echo "$(distdir) archives ready for distribution: "; \ |
| list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
| sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' |
| distuninstallcheck: |
| @test -n '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: trying to run $@ with an empty' \ |
| '$$(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| $(am__cd) '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left after uninstall:" ; \ |
| if test -n "$(DESTDIR)"; then \ |
| echo " (check DESTDIR support)"; \ |
| fi ; \ |
| $(distuninstallcheck_listfiles) ; \ |
| exit 1; } >&2 |
| distcleancheck: distclean |
| @if test '$(srcdir)' = . ; then \ |
| echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| exit 1 ; \ |
| fi |
| @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left in build directory after distclean:" ; \ |
| $(distcleancheck_listfiles) ; \ |
| exit 1; } >&2 |
| check-am: all-am |
| $(MAKE) $(AM_MAKEFLAGS) $(check_LTLIBRARIES) $(check_PROGRAMS) \ |
| $(check_SCRIPTS) $(check_DATA) |
| $(MAKE) $(AM_MAKEFLAGS) check-TESTS check-local |
| check: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) check-recursive |
| all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(DATA) \ |
| config.h |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(installed_testdir)" "$(DESTDIR)$(installed_testdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(installed_testdir)" "$(DESTDIR)$(installed_test_metadir)" "$(DESTDIR)$(installed_testdir)" "$(DESTDIR)$(pkgconfigdir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| if test -z '$(STRIP)'; then \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| install; \ |
| else \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| fi |
| mostlyclean-generic: |
| -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) |
| -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) |
| -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) |
| -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) |
| clean: clean-recursive |
| |
| clean-am: clean-checkLTLIBRARIES clean-checkPROGRAMS clean-generic \ |
| clean-installed_testLTLIBRARIES clean-installed_testPROGRAMS \ |
| clean-libtool clean-noinstLTLIBRARIES clean-noinstPROGRAMS \ |
| mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-hdr \ |
| distclean-libtool distclean-local distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| html-am: |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: install-installed_testLTLIBRARIES \ |
| install-installed_testPROGRAMS install-installed_testSCRIPTS \ |
| install-installed_test_metaDATA \ |
| install-nobase_installed_testDATA install-pkgconfigDATA |
| |
| install-dvi: install-dvi-recursive |
| |
| install-dvi-am: |
| |
| install-exec-am: install-binSCRIPTS |
| |
| install-html: install-html-recursive |
| |
| install-html-am: |
| |
| install-info: install-info-recursive |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-recursive |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-recursive |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-binSCRIPTS uninstall-installed_testLTLIBRARIES \ |
| uninstall-installed_testPROGRAMS \ |
| uninstall-installed_testSCRIPTS \ |
| uninstall-installed_test_metaDATA \ |
| uninstall-nobase_installed_testDATA uninstall-pkgconfigDATA |
| |
| .MAKE: $(am__recursive_targets) all check check-am install install-am \ |
| install-strip |
| |
| .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ |
| am--refresh check check-TESTS check-am check-local clean \ |
| clean-checkLTLIBRARIES clean-checkPROGRAMS clean-cscope \ |
| clean-generic clean-installed_testLTLIBRARIES \ |
| clean-installed_testPROGRAMS clean-libtool \ |
| clean-noinstLTLIBRARIES clean-noinstPROGRAMS cscope \ |
| cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ |
| dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \ |
| dist-zip distcheck distclean distclean-generic distclean-hdr \ |
| distclean-libtool distclean-local distclean-tags \ |
| distcleancheck distdir distuninstallcheck dvi dvi-am html \ |
| html-am info info-am install install-am install-binSCRIPTS \ |
| install-data install-data-am install-dvi install-dvi-am \ |
| install-exec install-exec-am install-html install-html-am \ |
| install-info install-info-am install-installed_testLTLIBRARIES \ |
| install-installed_testPROGRAMS install-installed_testSCRIPTS \ |
| install-installed_test_metaDATA install-man \ |
| install-nobase_installed_testDATA install-pdf install-pdf-am \ |
| install-pkgconfigDATA install-ps install-ps-am install-strip \ |
| installcheck installcheck-am installdirs installdirs-am \ |
| maintainer-clean maintainer-clean-generic mostlyclean \ |
| mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ |
| recheck tags tags-am uninstall uninstall-am \ |
| uninstall-binSCRIPTS uninstall-installed_testLTLIBRARIES \ |
| uninstall-installed_testPROGRAMS \ |
| uninstall-installed_testSCRIPTS \ |
| uninstall-installed_test_metaDATA \ |
| uninstall-nobase_installed_testDATA uninstall-pkgconfigDATA |
| |
| .PRECIOUS: Makefile |
| |
| |
| # test-nonrecursive: run tests only in cwd |
| @OS_UNIX_TRUE@test-nonrecursive: ${TEST_PROGS} |
| @OS_UNIX_TRUE@ @test -z "${TEST_PROGS}" || G_TEST_SRCDIR="$(abs_srcdir)" G_TEST_BUILDDIR="$(abs_builddir)" G_DEBUG=gc-friendly MALLOC_CHECK_=2 MALLOC_PERTURB_=$$(($${RANDOM:-256} % 256)) ${GTESTER} --verbose ${TEST_PROGS} |
| @OS_UNIX_FALSE@test-nonrecursive: |
| |
| .PHONY: test-nonrecursive |
| |
| .PHONY: lcov genlcov lcov-clean |
| # use recursive makes in order to ignore errors during check |
| lcov: |
| -$(MAKE) $(AM_MAKEFLAGS) -k check |
| $(MAKE) $(AM_MAKEFLAGS) genlcov |
| |
| # we have to massage the lcov.info file slightly to hide the effect of libtool |
| # placing the objects files in the .libs/ directory separate from the *.c |
| # we also have to delete tests/.libs/libmoduletestplugin_*.gcda |
| genlcov: |
| $(AM_V_GEN) rm -f $(top_builddir)/tests/.libs/libmoduletestplugin_*.gcda; \ |
| $(LTP) --quiet --directory $(top_builddir) --capture --output-file glib-lcov.info --test-name GLIB_PERF --no-checksum --compat-libtool --ignore-errors source; \ |
| $(LTP) --quiet --output-file glib-lcov.info --remove glib-lcov.info docs/reference/\* /tmp/\* gio/tests/gdbus-object-manager-example/\* ; \ |
| LANG=C $(LTP_GENHTML) --quiet --prefix $(top_builddir) --output-directory glib-lcov --title "GLib Code Coverage" --legend --frames --show-details glib-lcov.info --ignore-errors source |
| @echo "file://$(abs_top_builddir)/glib-lcov/index.html" |
| |
| lcov-clean: |
| if test -n "$(LTP)"; then \ |
| $(LTP) --quiet --directory $(top_builddir) -z; \ |
| fi |
| |
| # run tests in cwd as part of make check |
| check-local: test-nonrecursive |
| |
| @ENABLE_INSTALLED_TESTS_TRUE@%.test: %$(EXEEXT) Makefile |
| @ENABLE_INSTALLED_TESTS_TRUE@ $(AM_V_GEN) (echo '[Test]' > $@.tmp; \ |
| @ENABLE_INSTALLED_TESTS_TRUE@ echo 'Type=session' >> $@.tmp; \ |
| @ENABLE_INSTALLED_TESTS_TRUE@ echo 'Exec=$(installed_testdir)/$(notdir $<)' >> $@.tmp; \ |
| @ENABLE_INSTALLED_TESTS_TRUE@ mv $@.tmp $@) |
| |
| # http://people.gnome.org/~walters/docs/build-api.txt |
| .buildapi-allow-builddir: |
| |
| ChangeLog: |
| $(AM_V_GEN) if test -d "$(srcdir)/.git"; then \ |
| (GIT_DIR=$(top_srcdir)/.git ./missing --run git log GLIB_2_20_0^^.. --stat) | fmt --split-only > $@.tmp \ |
| && mv -f $@.tmp $@ \ |
| || ($(RM) $@.tmp; \ |
| echo Failed to generate ChangeLog, your ChangeLog may be outdated >&2; \ |
| (test -f $@ || echo git-log is required to generate this file >> $@)); \ |
| else \ |
| test -f $@ || \ |
| (echo A git checkout and git-log is required to generate ChangeLog >&2 && \ |
| echo A git checkout and git-log is required to generate this file >> $@); \ |
| fi |
| |
| $(pkgconfig_DATA): config.status |
| |
| distclean-local: lcov-clean |
| if test $(srcdir) = .; then :; else \ |
| rm -f $(BUILT_EXTRA_DIST); \ |
| fi |
| |
| .PHONY: files release sanity snapshot ChangeLog |
| |
| files: |
| @files=`ls $(DISTFILES) 2> /dev/null `; for p in $$files; do \ |
| echo $$p; \ |
| done |
| |
| release: |
| rm -rf .deps */.deps |
| cd docs && make glib.html |
| $(MAKE) distcheck |
| |
| sanity: |
| ./sanity_check $(VERSION) |
| |
| snapshot: |
| $(MAKE) dist distdir=$(PACKAGE)-snap`date +"%Y%m%d"` |
| |
| snapcheck: |
| $(MAKE) distcheck distdir=$(PACKAGE)-snap`date +"%Y%m%d"` |
| |
| dist-hook: $(BUILT_EXTRA_DIST) |
| files='$(BUILT_EXTRA_DIST)'; \ |
| for f in $$files; do \ |
| if test -f $$f; then d=.; else d=$(srcdir); fi; \ |
| rm -f $(distdir)/$$f && cp $$d/$$f $(distdir) || exit 1; done |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |