| /* |
| * |
| * Copyright (c) 2015-2017 Nest Labs, Inc. |
| * All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @file |
| * This file defines default compile-time configuration constants |
| * for the Nest Weave Address and Routing Module (WARM). |
| * |
| * Package integrators that wish to override these values should |
| * either use preprocessor definitions or create a project- |
| * specific WarmProjectConfig.h header and then assert |
| * HAVE_WARMPROJECTCONFIG_H. |
| * |
| */ |
| |
| #ifndef WARMCONFIG_H_ |
| #define WARMCONFIG_H_ |
| |
| #include <BuildConfig.h> |
| |
| #if HAVE_WARMPROJECTCONFIG_H |
| #include "WarmProjectConfig.h" |
| #endif |
| |
| /** |
| * @note |
| * Configurations for expected devices. |
| * |
| * Thread device. |
| * WARM_CONFIG_SUPPORT_CELLULAR - 0 |
| * WARM_CONFIG_SUPPORT_WIFI - 0 |
| * WARM_CONFIG_SUPPORT_THREAD - 1 |
| * WARM_CONFIG_SUPPORT_THREAD_ROUTING - 0 |
| * WARM_CONFIG_SUPPORT_LEGACY6LOWPAN_NETWORK - 0 |
| * WARM_CONFIG_SUPPORT_WEAVE_TUNNEL - 0 |
| * WARM_CONFIG_SUPPORT_BORDER_ROUTING - 0 |
| * |
| * Thread + Router device. |
| * WARM_CONFIG_SUPPORT_CELLULAR - 0 |
| * WARM_CONFIG_SUPPORT_WIFI - 0 |
| * WARM_CONFIG_SUPPORT_THREAD - 1 |
| * WARM_CONFIG_SUPPORT_THREAD_ROUTING - 1 |
| * WARM_CONFIG_SUPPORT_LEGACY6LOWPAN_NETWORK - 0 |
| * WARM_CONFIG_SUPPORT_WEAVE_TUNNEL - 0 |
| * WARM_CONFIG_SUPPORT_BORDER_ROUTING - 0 |
| * |
| * WiFi + Thread + Tunnel device. |
| * WARM_CONFIG_SUPPORT_CELLULAR - 0 |
| * WARM_CONFIG_SUPPORT_WIFI - 1 |
| * WARM_CONFIG_SUPPORT_THREAD - 1 |
| * WARM_CONFIG_SUPPORT_THREAD_ROUTING - 0 |
| * WARM_CONFIG_SUPPORT_LEGACY6LOWPAN_NETWORK - 0 |
| * WARM_CONFIG_SUPPORT_WEAVE_TUNNEL - 1 |
| * WARM_CONFIG_SUPPORT_BORDER_ROUTING - 0 |
| * |
| * WiFi + Thread + Tunnel + Router device. |
| * WARM_CONFIG_SUPPORT_CELLULAR - 0 |
| * WARM_CONFIG_SUPPORT_WIFI - 1 |
| * WARM_CONFIG_SUPPORT_THREAD - 1 |
| * WARM_CONFIG_SUPPORT_THREAD_ROUTING - 1 |
| * WARM_CONFIG_SUPPORT_LEGACY6LOWPAN_NETWORK - 0 |
| * WARM_CONFIG_SUPPORT_WEAVE_TUNNEL - 1 |
| * WARM_CONFIG_SUPPORT_BORDER_ROUTING - 1 |
| * |
| * Cellular + WiFi + Thread + Tunnel + Router device. |
| * WARM_CONFIG_SUPPORT_CELLULAR - 1 |
| * WARM_CONFIG_SUPPORT_WIFI - 1 |
| * WARM_CONFIG_SUPPORT_THREAD - 1 |
| * WARM_CONFIG_SUPPORT_THREAD_ROUTING - 1 |
| * WARM_CONFIG_SUPPORT_LEGACY6LOWPAN_NETWORK - 0 |
| * WARM_CONFIG_SUPPORT_WEAVE_TUNNEL - 1 |
| * WARM_CONFIG_SUPPORT_BORDER_ROUTING - 1 |
| */ |
| |
| /** |
| * @def WARM_CONFIG_SUPPORT_CELLULAR |
| * |
| * @brief |
| * Device supports cellular address and routing. |
| * |
| * If a product has a Cellular interface and it is desired |
| * to communicate over that network using the Weave |
| * then this configuration should be enabled. |
| * |
| */ |
| #ifndef WARM_CONFIG_SUPPORT_CELLULAR |
| #define WARM_CONFIG_SUPPORT_CELLULAR 0 |
| #endif |
| |
| /** |
| * @def WARM_CONFIG_SUPPORT_WIFI |
| * |
| * @brief |
| * Support WiFi address and routing. |
| * |
| * If a product has a WiFi interface and it is desired |
| * to use that interface for Weave routing then this |
| * configuration should be enabled. |
| * |
| */ |
| #ifndef WARM_CONFIG_SUPPORT_WIFI |
| #define WARM_CONFIG_SUPPORT_WIFI 1 |
| #endif |
| |
| /** |
| * @def WARM_CONFIG_SUPPORT_THREAD |
| * |
| * @brief |
| * Support Thread address and routing. |
| * |
| * If a product has a Thread interface and it is desired |
| * to use that interface for Weave routing then this |
| * configuration should be enabled. |
| * |
| */ |
| #ifndef WARM_CONFIG_SUPPORT_THREAD |
| #define WARM_CONFIG_SUPPORT_THREAD 1 |
| #endif |
| |
| /** |
| * @def WARM_CONFIG_SUPPORT_THREAD_ROUTING |
| * |
| * @brief |
| * Device can act as a thread router. |
| * |
| * If a product has a Thread interface and it is desired |
| * to act as a Thread router in the network then this |
| * configuration should be enabled. This feature depends |
| * on Thread support. |
| * |
| */ |
| #ifndef WARM_CONFIG_SUPPORT_THREAD_ROUTING |
| #define WARM_CONFIG_SUPPORT_THREAD_ROUTING WARM_CONFIG_SUPPORT_THREAD |
| #endif |
| |
| /** |
| * @def WARM_CONFIG_SUPPORT_LEGACY6LoWPAN_NETWORK |
| * |
| * @brief |
| * Device supports legacy 15.4 network communication. |
| * |
| * If a product has a Thread interface and it is desired |
| * to communicate over that network using the legacy |
| * protocol then this configuration should be enabled. |
| * This feature depends on Thread support. |
| * |
| */ |
| #ifndef WARM_CONFIG_SUPPORT_LEGACY6LOWPAN_NETWORK |
| #define WARM_CONFIG_SUPPORT_LEGACY6LOWPAN_NETWORK WARM_CONFIG_SUPPORT_THREAD |
| #endif |
| |
| /** |
| * @def WARM_CONFIG_SUPPORT_WEAVE_TUNNEL |
| * |
| * @brief |
| * Device supports a Weave tunnel to the cloud based Service. |
| * |
| * If the product is expected to provide a Weave tunnel to |
| * the Service then this configuration should be enabled. |
| * This feature is depends on Weave tunneling and one of |
| * WiFi or Cellular Support. |
| * |
| */ |
| #ifndef WARM_CONFIG_SUPPORT_WEAVE_TUNNEL |
| #define WARM_CONFIG_SUPPORT_WEAVE_TUNNEL (WEAVE_CONFIG_ENABLE_TUNNELING && (WARM_CONFIG_SUPPORT_WIFI || WARM_CONFIG_SUPPORT_CELLULAR)) |
| #endif |
| |
| /** |
| * @def WARM_CONFIG_SUPPORT_BORDER_ROUTING |
| * |
| * @brief |
| * Support Weave Border Routing functionality. |
| * |
| * If a product has a WiFi interface and it is desired |
| * for this product to act as a Border router then this |
| * configuration should be enabled. This feature depends |
| * on Thread support, Tunnel support and one of WiFi or Cellular |
| * support. |
| * |
| */ |
| #ifndef WARM_CONFIG_SUPPORT_BORDER_ROUTING |
| #define WARM_CONFIG_SUPPORT_BORDER_ROUTING (WARM_CONFIG_SUPPORT_THREAD && WARM_CONFIG_SUPPORT_WEAVE_TUNNEL && (WARM_CONFIG_SUPPORT_WIFI || WARM_CONFIG_SUPPORT_CELLULAR)) |
| #endif |
| |
| #endif /* WARMCONFIG_H_ */ |
