| # Makefile.in generated by automake 1.14.1 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994-2013 Free Software Foundation, Inc. |
| |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # |
| # Copyright (c) 2014-2017 Nest Labs, Inc. |
| # All rights reserved. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # |
| # Description: |
| # This file is the GNU automake template for the Nest Weave |
| # Device Manager Python script binding module. |
| # |
| # NOTE: The Python module loader cannot differentiate between |
| # WeaveDeviceMgr.py and WeaveDeviceMgr.so when attempting |
| # to import WeaveDeviceMgr. Consequently, we follow typical |
| # Python convention and name the DLL/DSO with a leading |
| # underscore (_) to disambiguate them when they are sitting |
| # in the same directory during development. |
| # |
| |
| |
| |
| VPATH = @srcdir@ |
| am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' |
| am__make_running_with_option = \ |
| case $${target_option-} in \ |
| ?) ;; \ |
| *) echo "am__make_running_with_option: internal error: invalid" \ |
| "target option '$${target_option-}' specified" >&2; \ |
| exit 1;; \ |
| esac; \ |
| has_opt=no; \ |
| sane_makeflags=$$MAKEFLAGS; \ |
| if $(am__is_gnu_make); then \ |
| sane_makeflags=$$MFLAGS; \ |
| else \ |
| case $$MAKEFLAGS in \ |
| *\\[\ \ ]*) \ |
| bs=\\; \ |
| sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ |
| | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ |
| esac; \ |
| fi; \ |
| skip_next=no; \ |
| strip_trailopt () \ |
| { \ |
| flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ |
| }; \ |
| for flg in $$sane_makeflags; do \ |
| test $$skip_next = yes && { skip_next=no; continue; }; \ |
| case $$flg in \ |
| *=*|--*) continue;; \ |
| -*I) strip_trailopt 'I'; skip_next=yes;; \ |
| -*I?*) strip_trailopt 'I';; \ |
| -*O) strip_trailopt 'O'; skip_next=yes;; \ |
| -*O?*) strip_trailopt 'O';; \ |
| -*l) strip_trailopt 'l'; skip_next=yes;; \ |
| -*l?*) strip_trailopt 'l';; \ |
| -[dEDm]) skip_next=yes;; \ |
| -[JT]) skip_next=yes;; \ |
| esac; \ |
| case $$flg in \ |
| *$$target_option*) has_opt=yes; break;; \ |
| esac; \ |
| done; \ |
| test $$has_opt = yes |
| am__make_dryrun = (target_option=n; $(am__make_running_with_option)) |
| am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| target_triplet = @target@ |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_WITH_PYTHON_TRUE@am__append_1 = \ |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_WITH_PYTHON_TRUE@ WeaveDeviceManager-BleApplicationDelegate.h \ |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_WITH_PYTHON_TRUE@ WeaveDeviceManager-BlePlatformDelegate.h \ |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_WITH_PYTHON_TRUE@ $(NULL) |
| |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_WITH_PYTHON_TRUE@am__append_2 = \ |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_WITH_PYTHON_TRUE@ WeaveDeviceManager-BlePlatformDelegate.cpp \ |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_WITH_PYTHON_TRUE@ WeaveDeviceManager-BleApplicationDelegate.cpp \ |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_WITH_PYTHON_TRUE@ $(NULL) |
| |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_WITH_PYTHON_TRUE@am__append_3 = \ |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_WITH_PYTHON_TRUE@ WeaveBleBase.py \ |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_WITH_PYTHON_TRUE@ WeaveCoreBluetoothMgr.py \ |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_WITH_PYTHON_TRUE@ WeaveBluezMgr.py \ |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_WITH_PYTHON_TRUE@ WeaveBleUtility.py \ |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_WITH_PYTHON_TRUE@ $(NULL) |
| |
| subdir = src/device-manager/python |
| DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/mkinstalldirs \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/depcomp \ |
| $(am__weave_PYTHON_DIST) \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/py-compile \ |
| $(am__noinst_HEADERS_DIST) |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/build/autoconf/m4/nl_check_project_config_includes.m4 \ |
| $(top_srcdir)/build/autoconf/m4/nl_enable_long_tests.m4 \ |
| $(top_srcdir)/build/autoconf/m4/nl_with_lwip.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| mkinstalldirs = $(SHELL) \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/mkinstalldirs |
| CONFIG_HEADER = $(top_builddir)/src/include/BuildConfig.h |
| CONFIG_CLEAN_FILES = |
| CONFIG_CLEAN_VPATH_FILES = |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| am__uninstall_files_from_dir = { \ |
| test -z "$$files" \ |
| || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
| || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
| $(am__cd) "$$dir" && rm -f $$files; }; \ |
| } |
| am__installdirs = "$(DESTDIR)$(pyexecdir)" "$(DESTDIR)$(libexecdir)" \ |
| "$(DESTDIR)$(weavedir)" "$(DESTDIR)$(weavedir)" |
| LTLIBRARIES = $(pyexec_LTLIBRARIES) |
| am___WeaveDeviceMgr_la_SOURCES_DIST = \ |
| WeaveDeviceManager-ScriptBinding.cpp \ |
| WeaveDeviceManager-BlePlatformDelegate.cpp \ |
| WeaveDeviceManager-BleApplicationDelegate.cpp |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_WITH_PYTHON_TRUE@am__objects_1 = _WeaveDeviceMgr_la-WeaveDeviceManager-BlePlatformDelegate.lo \ |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_WITH_PYTHON_TRUE@ _WeaveDeviceMgr_la-WeaveDeviceManager-BleApplicationDelegate.lo |
| @WEAVE_WITH_PYTHON_TRUE@am__WeaveDeviceMgr_la_OBJECTS = _WeaveDeviceMgr_la-WeaveDeviceManager-ScriptBinding.lo \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(am__objects_1) |
| _WeaveDeviceMgr_la_OBJECTS = $(am__WeaveDeviceMgr_la_OBJECTS) |
| AM_V_lt = $(am__v_lt_@AM_V@) |
| am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) |
| am__v_lt_0 = --silent |
| am__v_lt_1 = |
| _WeaveDeviceMgr_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX \ |
| $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CXXLD) \ |
| $(AM_CXXFLAGS) $(CXXFLAGS) $(_WeaveDeviceMgr_la_LDFLAGS) \ |
| $(LDFLAGS) -o $@ |
| @WEAVE_WITH_PYTHON_TRUE@am__WeaveDeviceMgr_la_rpath = -rpath \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(pyexecdir) |
| SCRIPTS = $(libexec_SCRIPTS) $(weave_SCRIPTS) |
| AM_V_P = $(am__v_P_@AM_V@) |
| am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) |
| am__v_P_0 = false |
| am__v_P_1 = : |
| AM_V_GEN = $(am__v_GEN_@AM_V@) |
| am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) |
| am__v_GEN_0 = @echo " GEN " $@; |
| am__v_GEN_1 = |
| AM_V_at = $(am__v_at_@AM_V@) |
| am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) |
| am__v_at_0 = @ |
| am__v_at_1 = |
| DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src/include |
| depcomp = $(SHELL) \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/depcomp |
| am__depfiles_maybe = depfiles |
| am__mv = mv -f |
| CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ |
| $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) |
| LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \ |
| $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \ |
| $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ |
| $(AM_CXXFLAGS) $(CXXFLAGS) |
| AM_V_CXX = $(am__v_CXX_@AM_V@) |
| am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@) |
| am__v_CXX_0 = @echo " CXX " $@; |
| am__v_CXX_1 = |
| CXXLD = $(CXX) |
| CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \ |
| $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \ |
| $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ |
| AM_V_CXXLD = $(am__v_CXXLD_@AM_V@) |
| am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@) |
| am__v_CXXLD_0 = @echo " CXXLD " $@; |
| am__v_CXXLD_1 = |
| SOURCES = $(_WeaveDeviceMgr_la_SOURCES) |
| DIST_SOURCES = $(am___WeaveDeviceMgr_la_SOURCES_DIST) |
| am__can_run_installinfo = \ |
| case $$AM_UPDATE_INFO_DIR in \ |
| n|no|NO) false;; \ |
| *) (install-info --version) >/dev/null 2>&1;; \ |
| esac |
| am__weave_PYTHON_DIST = WeaveDeviceMgr.py WeaveBleBase.py \ |
| WeaveCoreBluetoothMgr.py WeaveBluezMgr.py WeaveBleUtility.py |
| am__py_compile = PYTHON=$(PYTHON) $(SHELL) $(py_compile) |
| am__pep3147_tweak = \ |
| sed -e 's|\.py$$||' -e 's|[^/]*$$|__pycache__/&.*.py|' |
| py_compile = $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/py-compile |
| am__noinst_HEADERS_DIST = WeaveDeviceManager-BleApplicationDelegate.h \ |
| WeaveDeviceManager-BlePlatformDelegate.h |
| HEADERS = $(noinst_HEADERS) |
| am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) |
| # Read a list of newline-separated strings from the standard input, |
| # and print each of them once, without duplicates. Input order is |
| # *not* preserved. |
| am__uniquify_input = $(AWK) '\ |
| BEGIN { nonempty = 0; } \ |
| { items[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in items) print i; }; } \ |
| ' |
| # Make sure the list of sources is unique. This is necessary because, |
| # e.g., the same source file might be shared among _SOURCES variables |
| # for different programs/libraries. |
| am__define_uniq_tagged_files = \ |
| list='$(am__tagged_files)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | $(am__uniquify_input)` |
| ETAGS = etags |
| CTAGS = ctags |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| ACLOCAL = @ACLOCAL@ |
| AMTAR = @AMTAR@ |
| AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BLUEZ_BUILD_DIRECTORY = @BLUEZ_BUILD_DIRECTORY@ |
| BLUEZ_CPPFLAGS = @BLUEZ_CPPFLAGS@ |
| BLUEZ_LDFLAGS = @BLUEZ_LDFLAGS@ |
| BLUEZ_LIBS = @BLUEZ_LIBS@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CMP = @CMP@ |
| CONFIG_HAVE_HEAP = @CONFIG_HAVE_HEAP@ |
| CONFIG_HAVE_VCBPRINTF = @CONFIG_HAVE_VCBPRINTF@ |
| CONFIG_HAVE_VSNPRINTF_EX = @CONFIG_HAVE_VSNPRINTF_EX@ |
| CONFIG_NETWORK_LAYER_BLE = @CONFIG_NETWORK_LAYER_BLE@ |
| CONFIG_NETWORK_LAYER_INET = @CONFIG_NETWORK_LAYER_INET@ |
| CONFIG_TARGET_NETWORKS = @CONFIG_TARGET_NETWORKS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CROSS_SDK = @CROSS_SDK@ |
| CROSS_SYSROOT = @CROSS_SYSROOT@ |
| CROSS_TOP = @CROSS_TOP@ |
| CURL_CPPFLAGS = @CURL_CPPFLAGS@ |
| CURL_LDFLAGS = @CURL_LDFLAGS@ |
| CURL_LIBS = @CURL_LIBS@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXDEPMODE = @CXXDEPMODE@ |
| CXXFLAGS = @CXXFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DBUS_CFLAGS = @DBUS_CFLAGS@ |
| DBUS_LIBS = @DBUS_LIBS@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DLLTOOL = @DLLTOOL@ |
| DOT = @DOT@ |
| DOXYGEN = @DOXYGEN@ |
| DOXYGEN_USE_DOT = @DOXYGEN_USE_DOT@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| FGREP = @FGREP@ |
| GENHTML = @GENHTML@ |
| GLIB_CFLAGS = @GLIB_CFLAGS@ |
| GLIB_LIBS = @GLIB_LIBS@ |
| GREP = @GREP@ |
| HAPPY_DNS = @HAPPY_DNS@ |
| HAPPY_PATH = @HAPPY_PATH@ |
| HAPPY_SERVICE = @HAPPY_SERVICE@ |
| HAVE_CXX11 = @HAVE_CXX11@ |
| HAVE_IN6_RTMSG = @HAVE_IN6_RTMSG@ |
| HAVE_LINUX_IF_TUN_H = @HAVE_LINUX_IF_TUN_H@ |
| HAVE_LINUX_IPV6_ROUTE_H = @HAVE_LINUX_IPV6_ROUTE_H@ |
| HAVE_LINUX_ROUTE_H = @HAVE_LINUX_ROUTE_H@ |
| INET_ENDPOINTS = @INET_ENDPOINTS@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| JAR = @JAR@ |
| JAVAC = @JAVAC@ |
| JAVA_HOME = @JAVA_HOME@ |
| JNI_CPPFLAGS = @JNI_CPPFLAGS@ |
| LCOV = @LCOV@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIBWEAVE_VERSION_AGE = @LIBWEAVE_VERSION_AGE@ |
| LIBWEAVE_VERSION_CURRENT = @LIBWEAVE_VERSION_CURRENT@ |
| LIBWEAVE_VERSION_INFO = @LIBWEAVE_VERSION_INFO@ |
| LIBWEAVE_VERSION_REVISION = @LIBWEAVE_VERSION_REVISION@ |
| LIPO = @LIPO@ |
| LNDIR = @LNDIR@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| LWIP_CPPFLAGS = @LWIP_CPPFLAGS@ |
| LWIP_LDFLAGS = @LWIP_LDFLAGS@ |
| LWIP_LIBS = @LWIP_LIBS@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MANIFEST_TOOL = @MANIFEST_TOOL@ |
| MKDIR_P = @MKDIR_P@ |
| NLASSERT_CPPFLAGS = @NLASSERT_CPPFLAGS@ |
| NLASSERT_LDFLAGS = @NLASSERT_LDFLAGS@ |
| NLASSERT_LIBS = @NLASSERT_LIBS@ |
| NLFAULTINJECTION_CPPFLAGS = @NLFAULTINJECTION_CPPFLAGS@ |
| NLFAULTINJECTION_LDFLAGS = @NLFAULTINJECTION_LDFLAGS@ |
| NLFAULTINJECTION_LIBS = @NLFAULTINJECTION_LIBS@ |
| NLIO_CPPFLAGS = @NLIO_CPPFLAGS@ |
| NLIO_LDFLAGS = @NLIO_LDFLAGS@ |
| NLIO_LIBS = @NLIO_LIBS@ |
| NLUNITTEST_CPPFLAGS = @NLUNITTEST_CPPFLAGS@ |
| NLUNITTEST_LDFLAGS = @NLUNITTEST_LDFLAGS@ |
| NLUNITTEST_LIBS = @NLUNITTEST_LIBS@ |
| NL_PROJECT_CONFIG_INCLUDES = @NL_PROJECT_CONFIG_INCLUDES@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| OBJC = @OBJC@ |
| OBJCDEPMODE = @OBJCDEPMODE@ |
| OBJCFLAGS = @OBJCFLAGS@ |
| OBJCOPY = @OBJCOPY@ |
| OBJCXX = @OBJCXX@ |
| OBJCXXCPP = @OBJCXXCPP@ |
| OBJCXXDEPMODE = @OBJCXXDEPMODE@ |
| OBJCXXFLAGS = @OBJCXXFLAGS@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OPENSSL_CPPFLAGS = @OPENSSL_CPPFLAGS@ |
| OPENSSL_LDFLAGS = @OPENSSL_LDFLAGS@ |
| OPENSSL_LIBS = @OPENSSL_LIBS@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PERL = @PERL@ |
| PKG_CONFIG = @PKG_CONFIG@ |
| PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ |
| PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ |
| PRETTY_CHECK = @PRETTY_CHECK@ |
| PRETTY_CHECK_ARGS = @PRETTY_CHECK_ARGS@ |
| PTHREAD_CC = @PTHREAD_CC@ |
| PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ |
| PTHREAD_LIBS = @PTHREAD_LIBS@ |
| PYTHON = @PYTHON@ |
| PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ |
| PYTHON_PLATFORM = @PYTHON_PLATFORM@ |
| PYTHON_PREFIX = @PYTHON_PREFIX@ |
| PYTHON_VERSION = @PYTHON_VERSION@ |
| RANLIB = @RANLIB@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| SOCKETS_CPPFLAGS = @SOCKETS_CPPFLAGS@ |
| SOCKETS_LDFLAGS = @SOCKETS_LDFLAGS@ |
| SOCKETS_LIBS = @SOCKETS_LIBS@ |
| STRIP = @STRIP@ |
| VERSION = @VERSION@ |
| VISIBILITY_CFLAGS = @VISIBILITY_CFLAGS@ |
| VISIBILITY_CXXFLAGS = @VISIBILITY_CXXFLAGS@ |
| VISIBILITY_OBJCFLAGS = @VISIBILITY_OBJCFLAGS@ |
| VISIBILITY_OBJCXXCFLAGS = @VISIBILITY_OBJCXXCFLAGS@ |
| WEAVE_LOGGING_STYLE = @WEAVE_LOGGING_STYLE@ |
| WEAVE_LOGGING_STYLE_ANDROID = @WEAVE_LOGGING_STYLE_ANDROID@ |
| WEAVE_LOGGING_STYLE_EXTERNAL = @WEAVE_LOGGING_STYLE_EXTERNAL@ |
| WEAVE_LOGGING_STYLE_STDIO = @WEAVE_LOGGING_STYLE_STDIO@ |
| WEAVE_LOGGING_STYLE_STDIO_WEAK = @WEAVE_LOGGING_STYLE_STDIO_WEAK@ |
| WEAVE_OPENSSL_TARGET = @WEAVE_OPENSSL_TARGET@ |
| WEAVE_OPENSSL_TARGET_DEFINES = @WEAVE_OPENSSL_TARGET_DEFINES@ |
| WEAVE_SYSTEM_CONFIG_USE_LWIP = @WEAVE_SYSTEM_CONFIG_USE_LWIP@ |
| WEAVE_SYSTEM_CONFIG_USE_SOCKETS = @WEAVE_SYSTEM_CONFIG_USE_SOCKETS@ |
| WEAVE_TARGET_STYLE = @WEAVE_TARGET_STYLE@ |
| WEAVE_TARGET_STYLE_EMBEDDED = @WEAVE_TARGET_STYLE_EMBEDDED@ |
| WEAVE_TARGET_STYLE_UNIX = @WEAVE_TARGET_STYLE_UNIX@ |
| _ACJNI_JAVAC = @_ACJNI_JAVAC@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_nlbuild_autotools_dir = @abs_top_nlbuild_autotools_dir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| ac_ct_OBJC = @ac_ct_OBJC@ |
| ac_ct_OBJCXX = @ac_ct_OBJCXX@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| ax_pthread_config = @ax_pthread_config@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| nlbuild_autotools_stem = @nlbuild_autotools_stem@ |
| oldincludedir = @oldincludedir@ |
| openssl_buildstem = @openssl_buildstem@ |
| pdfdir = @pdfdir@ |
| pkgpyexecdir = @pkgpyexecdir@ |
| pkgpythondir = @pkgpythondir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| pyexecdir = @pyexecdir@ |
| pythondir = @pythondir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| subdirs = @subdirs@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_cpu = @target_cpu@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| EXTRA_DIST = \ |
| weave-device-mgr.py \ |
| $(NULL) |
| |
| @WEAVE_WITH_PYTHON_TRUE@pyexec_LTLIBRARIES = _WeaveDeviceMgr.la |
| @WEAVE_WITH_PYTHON_TRUE@noinst_HEADERS = $(NULL) $(am__append_1) |
| @WEAVE_WITH_PYTHON_TRUE@_WeaveDeviceMgr_la_SOURCES = \ |
| @WEAVE_WITH_PYTHON_TRUE@ WeaveDeviceManager-ScriptBinding.cpp \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(NULL) $(am__append_2) |
| @WEAVE_WITH_PYTHON_TRUE@_WeaveDeviceMgr_la_CPPFLAGS = \ |
| @WEAVE_WITH_PYTHON_TRUE@ -I$(srcdir)/.. \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(LWIP_CPPFLAGS) \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(SOCKETS_CPPFLAGS) \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(NULL) |
| |
| @WEAVE_WITH_PYTHON_TRUE@_WeaveDeviceMgr_la_LIBADD = \ |
| @WEAVE_WITH_PYTHON_TRUE@ ../libWeaveDeviceManager.la \ |
| @WEAVE_WITH_PYTHON_TRUE@ -L$(top_builddir)/src/lib -lWeave \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(NULL) |
| |
| @WEAVE_WITH_PYTHON_TRUE@_WeaveDeviceMgr_la_DEPENDENCIES = \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(top_builddir)/src/lib/libWeave.a \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(NULL) |
| |
| @WEAVE_WITH_PYTHON_TRUE@_WeaveDeviceMgr_la_LDFLAGS = \ |
| @WEAVE_WITH_PYTHON_TRUE@ -avoid-version \ |
| @WEAVE_WITH_PYTHON_TRUE@ -module \ |
| @WEAVE_WITH_PYTHON_TRUE@ -no-undefined \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(NULL) |
| |
| @WEAVE_WITH_PYTHON_TRUE@weavedir = $(pyexecdir)/weave |
| @WEAVE_WITH_PYTHON_TRUE@modules = WeaveDeviceMgr.py $(NULL) \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(am__append_3) |
| @WEAVE_WITH_PYTHON_TRUE@srcmodules = $(addprefix $(srcdir)/,$(modules)) |
| @WEAVE_WITH_PYTHON_TRUE@buildmodules = $(addprefix $(builddir)/,$(modules)) |
| @WEAVE_WITH_PYTHON_TRUE@cleanmodules = $(if $(call IsRealPath,$(buildmodules)),,$(buildmodules)) |
| @WEAVE_WITH_PYTHON_TRUE@weave_SCRIPTS = \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(modules) \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(NULL) |
| |
| @WEAVE_WITH_PYTHON_TRUE@weave_PYTHON = \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(weave_SCRIPTS) \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(NULL) |
| |
| |
| # Tool scripts that should be installed when the 'install' target is run. |
| # |
| # These will be part of the externally-consumable SDK. |
| # |
| # These need to go in libexec since they need to be "trampolined" |
| # through the 'weave-run' script due to runtime dependencies on |
| # DLLs/DSOs that the runtime linker / loader will need to resolve when |
| # they invoked. |
| @WEAVE_WITH_PYTHON_TRUE@libexec_SCRIPTS = \ |
| @WEAVE_WITH_PYTHON_TRUE@ weave-device-mgr \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(NULL) |
| |
| |
| # The bin_LINKS variable enumerates programs that need to be |
| # "trampolined" through the 'weave-run' script due to runtime |
| # dependencies on DLLs/DSOs that the runtime linker / loader will need |
| # to resolve when they invoked. |
| @WEAVE_WITH_PYTHON_TRUE@bin_LINKS = \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(libexec_SCRIPTS) \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(NULL) |
| |
| @WEAVE_WITH_PYTHON_TRUE@CLEANFILES = \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(libexec_SCRIPTS) \ |
| @WEAVE_WITH_PYTHON_TRUE@ _WeaveDeviceMgr.so \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(cleanmodule) \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(NULL) |
| |
| all: all-am |
| |
| .SUFFIXES: |
| .SUFFIXES: .cpp .lo .o .obj |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ |
| && { if test -f $@; then exit 0; else break; fi; }; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/device-manager/python/Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign src/device-manager/python/Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(am__aclocal_m4_deps): |
| |
| install-pyexecLTLIBRARIES: $(pyexec_LTLIBRARIES) |
| @$(NORMAL_INSTALL) |
| @list='$(pyexec_LTLIBRARIES)'; test -n "$(pyexecdir)" || list=; \ |
| list2=; for p in $$list; do \ |
| if test -f $$p; then \ |
| list2="$$list2 $$p"; \ |
| else :; fi; \ |
| done; \ |
| test -z "$$list2" || { \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(pyexecdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(pyexecdir)" || exit 1; \ |
| echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pyexecdir)'"; \ |
| $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pyexecdir)"; \ |
| } |
| |
| uninstall-pyexecLTLIBRARIES: |
| @$(NORMAL_UNINSTALL) |
| @list='$(pyexec_LTLIBRARIES)'; test -n "$(pyexecdir)" || list=; \ |
| for p in $$list; do \ |
| $(am__strip_dir) \ |
| echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pyexecdir)/$$f'"; \ |
| $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pyexecdir)/$$f"; \ |
| done |
| |
| clean-pyexecLTLIBRARIES: |
| -test -z "$(pyexec_LTLIBRARIES)" || rm -f $(pyexec_LTLIBRARIES) |
| @list='$(pyexec_LTLIBRARIES)'; \ |
| locs=`for p in $$list; do echo $$p; done | \ |
| sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ |
| sort -u`; \ |
| test -z "$$locs" || { \ |
| echo rm -f $${locs}; \ |
| rm -f $${locs}; \ |
| } |
| |
| _WeaveDeviceMgr.la: $(_WeaveDeviceMgr_la_OBJECTS) $(_WeaveDeviceMgr_la_DEPENDENCIES) $(EXTRA__WeaveDeviceMgr_la_DEPENDENCIES) |
| $(AM_V_CXXLD)$(_WeaveDeviceMgr_la_LINK) $(am__WeaveDeviceMgr_la_rpath) $(_WeaveDeviceMgr_la_OBJECTS) $(_WeaveDeviceMgr_la_LIBADD) $(LIBS) |
| install-libexecSCRIPTS: $(libexec_SCRIPTS) |
| @$(NORMAL_INSTALL) |
| @list='$(libexec_SCRIPTS)'; test -n "$(libexecdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(libexecdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(libexecdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ |
| done | \ |
| sed -e 'p;s,.*/,,;n' \ |
| -e 'h;s|.*|.|' \ |
| -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ |
| $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ |
| { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ |
| if ($$2 == $$4) { files[d] = files[d] " " $$1; \ |
| if (++n[d] == $(am__install_max)) { \ |
| print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ |
| else { print "f", d "/" $$4, $$1 } } \ |
| END { for (d in files) print "f", d, files[d] }' | \ |
| while read type dir files; do \ |
| if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ |
| test -z "$$files" || { \ |
| echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ |
| $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ |
| } \ |
| ; done |
| |
| uninstall-libexecSCRIPTS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(libexec_SCRIPTS)'; test -n "$(libexecdir)" || exit 0; \ |
| files=`for p in $$list; do echo "$$p"; done | \ |
| sed -e 's,.*/,,;$(transform)'`; \ |
| dir='$(DESTDIR)$(libexecdir)'; $(am__uninstall_files_from_dir) |
| install-weaveSCRIPTS: $(weave_SCRIPTS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_SCRIPTS)'; test -n "$(weavedir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weavedir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weavedir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ |
| done | \ |
| sed -e 'p;s,.*/,,;n' \ |
| -e 'h;s|.*|.|' \ |
| -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ |
| $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ |
| { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ |
| if ($$2 == $$4) { files[d] = files[d] " " $$1; \ |
| if (++n[d] == $(am__install_max)) { \ |
| print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ |
| else { print "f", d "/" $$4, $$1 } } \ |
| END { for (d in files) print "f", d, files[d] }' | \ |
| while read type dir files; do \ |
| if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ |
| test -z "$$files" || { \ |
| echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(weavedir)$$dir'"; \ |
| $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(weavedir)$$dir" || exit $$?; \ |
| } \ |
| ; done |
| |
| uninstall-weaveSCRIPTS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_SCRIPTS)'; test -n "$(weavedir)" || exit 0; \ |
| files=`for p in $$list; do echo "$$p"; done | \ |
| sed -e 's,.*/,,;$(transform)'`; \ |
| dir='$(DESTDIR)$(weavedir)'; $(am__uninstall_files_from_dir) |
| |
| mostlyclean-compile: |
| -rm -f *.$(OBJEXT) |
| |
| distclean-compile: |
| -rm -f *.tab.c |
| |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/_WeaveDeviceMgr_la-WeaveDeviceManager-BleApplicationDelegate.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/_WeaveDeviceMgr_la-WeaveDeviceManager-BlePlatformDelegate.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/_WeaveDeviceMgr_la-WeaveDeviceManager-ScriptBinding.Plo@am__quote@ |
| |
| .cpp.o: |
| @am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ |
| @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ |
| @am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $< |
| |
| .cpp.obj: |
| @am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ |
| @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ |
| @am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` |
| |
| .cpp.lo: |
| @am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ |
| @am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ |
| @am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $< |
| |
| _WeaveDeviceMgr_la-WeaveDeviceManager-ScriptBinding.lo: WeaveDeviceManager-ScriptBinding.cpp |
| @am__fastdepCXX_TRUE@ $(AM_V_CXX)$(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(_WeaveDeviceMgr_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT _WeaveDeviceMgr_la-WeaveDeviceManager-ScriptBinding.lo -MD -MP -MF $(DEPDIR)/_WeaveDeviceMgr_la-WeaveDeviceManager-ScriptBinding.Tpo -c -o _WeaveDeviceMgr_la-WeaveDeviceManager-ScriptBinding.lo `test -f 'WeaveDeviceManager-ScriptBinding.cpp' || echo '$(srcdir)/'`WeaveDeviceManager-ScriptBinding.cpp |
| @am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/_WeaveDeviceMgr_la-WeaveDeviceManager-ScriptBinding.Tpo $(DEPDIR)/_WeaveDeviceMgr_la-WeaveDeviceManager-ScriptBinding.Plo |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='WeaveDeviceManager-ScriptBinding.cpp' object='_WeaveDeviceMgr_la-WeaveDeviceManager-ScriptBinding.lo' libtool=yes @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(_WeaveDeviceMgr_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o _WeaveDeviceMgr_la-WeaveDeviceManager-ScriptBinding.lo `test -f 'WeaveDeviceManager-ScriptBinding.cpp' || echo '$(srcdir)/'`WeaveDeviceManager-ScriptBinding.cpp |
| |
| _WeaveDeviceMgr_la-WeaveDeviceManager-BlePlatformDelegate.lo: WeaveDeviceManager-BlePlatformDelegate.cpp |
| @am__fastdepCXX_TRUE@ $(AM_V_CXX)$(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(_WeaveDeviceMgr_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT _WeaveDeviceMgr_la-WeaveDeviceManager-BlePlatformDelegate.lo -MD -MP -MF $(DEPDIR)/_WeaveDeviceMgr_la-WeaveDeviceManager-BlePlatformDelegate.Tpo -c -o _WeaveDeviceMgr_la-WeaveDeviceManager-BlePlatformDelegate.lo `test -f 'WeaveDeviceManager-BlePlatformDelegate.cpp' || echo '$(srcdir)/'`WeaveDeviceManager-BlePlatformDelegate.cpp |
| @am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/_WeaveDeviceMgr_la-WeaveDeviceManager-BlePlatformDelegate.Tpo $(DEPDIR)/_WeaveDeviceMgr_la-WeaveDeviceManager-BlePlatformDelegate.Plo |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='WeaveDeviceManager-BlePlatformDelegate.cpp' object='_WeaveDeviceMgr_la-WeaveDeviceManager-BlePlatformDelegate.lo' libtool=yes @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(_WeaveDeviceMgr_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o _WeaveDeviceMgr_la-WeaveDeviceManager-BlePlatformDelegate.lo `test -f 'WeaveDeviceManager-BlePlatformDelegate.cpp' || echo '$(srcdir)/'`WeaveDeviceManager-BlePlatformDelegate.cpp |
| |
| _WeaveDeviceMgr_la-WeaveDeviceManager-BleApplicationDelegate.lo: WeaveDeviceManager-BleApplicationDelegate.cpp |
| @am__fastdepCXX_TRUE@ $(AM_V_CXX)$(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(_WeaveDeviceMgr_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT _WeaveDeviceMgr_la-WeaveDeviceManager-BleApplicationDelegate.lo -MD -MP -MF $(DEPDIR)/_WeaveDeviceMgr_la-WeaveDeviceManager-BleApplicationDelegate.Tpo -c -o _WeaveDeviceMgr_la-WeaveDeviceManager-BleApplicationDelegate.lo `test -f 'WeaveDeviceManager-BleApplicationDelegate.cpp' || echo '$(srcdir)/'`WeaveDeviceManager-BleApplicationDelegate.cpp |
| @am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/_WeaveDeviceMgr_la-WeaveDeviceManager-BleApplicationDelegate.Tpo $(DEPDIR)/_WeaveDeviceMgr_la-WeaveDeviceManager-BleApplicationDelegate.Plo |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='WeaveDeviceManager-BleApplicationDelegate.cpp' object='_WeaveDeviceMgr_la-WeaveDeviceManager-BleApplicationDelegate.lo' libtool=yes @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(_WeaveDeviceMgr_la_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o _WeaveDeviceMgr_la-WeaveDeviceManager-BleApplicationDelegate.lo `test -f 'WeaveDeviceManager-BleApplicationDelegate.cpp' || echo '$(srcdir)/'`WeaveDeviceManager-BleApplicationDelegate.cpp |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| install-weavePYTHON: $(weave_PYTHON) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_PYTHON)'; dlist=; list2=; test -n "$(weavedir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weavedir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weavedir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \ |
| if test -f $$b$$p; then \ |
| $(am__strip_dir) \ |
| dlist="$$dlist $$f"; \ |
| list2="$$list2 $$b$$p"; \ |
| else :; fi; \ |
| done; \ |
| for file in $$list2; do echo $$file; done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(weavedir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(weavedir)" || exit $$?; \ |
| done || exit $$?; \ |
| if test -n "$$dlist"; then \ |
| $(am__py_compile) --destdir "$(DESTDIR)" \ |
| --basedir "$(weavedir)" $$dlist; \ |
| else :; fi |
| |
| uninstall-weavePYTHON: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_PYTHON)'; test -n "$(weavedir)" || list=; \ |
| py_files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| test -n "$$py_files" || exit 0; \ |
| dir='$(DESTDIR)$(weavedir)'; \ |
| pyc_files=`echo "$$py_files" | sed 's|$$|c|'`; \ |
| pyo_files=`echo "$$py_files" | sed 's|$$|o|'`; \ |
| py_files_pep3147=`echo "$$py_files" | $(am__pep3147_tweak)`; \ |
| echo "$$py_files_pep3147";\ |
| pyc_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|c|'`; \ |
| pyo_files_pep3147=`echo "$$py_files_pep3147" | sed 's|$$|o|'`; \ |
| st=0; \ |
| for files in \ |
| "$$py_files" \ |
| "$$pyc_files" \ |
| "$$pyo_files" \ |
| "$$pyc_files_pep3147" \ |
| "$$pyo_files_pep3147" \ |
| ; do \ |
| $(am__uninstall_files_from_dir) || st=$$?; \ |
| done; \ |
| exit $$st |
| |
| ID: $(am__tagged_files) |
| $(am__define_uniq_tagged_files); mkid -fID $$unique |
| tags: tags-am |
| TAGS: tags |
| |
| tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| set x; \ |
| here=`pwd`; \ |
| $(am__define_uniq_tagged_files); \ |
| shift; \ |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| if test $$# -gt 0; then \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| "$$@" $$unique; \ |
| else \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$unique; \ |
| fi; \ |
| fi |
| ctags: ctags-am |
| |
| CTAGS: ctags |
| ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| $(am__define_uniq_tagged_files); \ |
| test -z "$(CTAGS_ARGS)$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && $(am__cd) $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) "$$here" |
| cscopelist: cscopelist-am |
| |
| cscopelist-am: $(am__tagged_files) |
| list='$(am__tagged_files)'; \ |
| case "$(srcdir)" in \ |
| [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ |
| *) sdir=$(subdir)/$(srcdir) ;; \ |
| esac; \ |
| for i in $$list; do \ |
| if test -f "$$i"; then \ |
| echo "$(subdir)/$$i"; \ |
| else \ |
| echo "$$sdir/$$i"; \ |
| fi; \ |
| done >> $(top_builddir)/cscope.files |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| distdir: $(DISTFILES) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| check-am: all-am |
| check: check-am |
| @WEAVE_WITH_PYTHON_FALSE@all-local: |
| all-am: Makefile $(LTLIBRARIES) $(SCRIPTS) $(HEADERS) all-local |
| installdirs: |
| for dir in "$(DESTDIR)$(pyexecdir)" "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(weavedir)" "$(DESTDIR)$(weavedir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: install-am |
| install-exec: install-exec-am |
| install-data: install-data-am |
| uninstall: uninstall-am |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-am |
| install-strip: |
| if test -z '$(STRIP)'; then \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| install; \ |
| else \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| fi |
| mostlyclean-generic: |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| @WEAVE_WITH_PYTHON_FALSE@install-exec-local: |
| @WEAVE_WITH_PYTHON_FALSE@uninstall-local: |
| @WEAVE_WITH_PYTHON_FALSE@install-exec-hook: |
| clean: clean-am |
| |
| clean-am: clean-generic clean-libtool clean-pyexecLTLIBRARIES \ |
| mostlyclean-am |
| |
| distclean: distclean-am |
| -rm -rf ./$(DEPDIR) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-compile distclean-generic \ |
| distclean-tags |
| |
| dvi: dvi-am |
| |
| dvi-am: |
| |
| html: html-am |
| |
| html-am: |
| |
| info: info-am |
| |
| info-am: |
| |
| install-data-am: install-weavePYTHON install-weaveSCRIPTS |
| |
| install-dvi: install-dvi-am |
| |
| install-dvi-am: |
| |
| install-exec-am: install-exec-local install-libexecSCRIPTS \ |
| install-pyexecLTLIBRARIES |
| @$(NORMAL_INSTALL) |
| $(MAKE) $(AM_MAKEFLAGS) install-exec-hook |
| install-html: install-html-am |
| |
| install-html-am: |
| |
| install-info: install-info-am |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-am |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-am |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-am |
| -rm -rf ./$(DEPDIR) |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-am |
| |
| mostlyclean-am: mostlyclean-compile mostlyclean-generic \ |
| mostlyclean-libtool |
| |
| pdf: pdf-am |
| |
| pdf-am: |
| |
| ps: ps-am |
| |
| ps-am: |
| |
| uninstall-am: uninstall-libexecSCRIPTS uninstall-local \ |
| uninstall-pyexecLTLIBRARIES uninstall-weavePYTHON \ |
| uninstall-weaveSCRIPTS |
| |
| .MAKE: install-am install-exec-am install-strip |
| |
| .PHONY: CTAGS GTAGS TAGS all all-am all-local check check-am clean \ |
| clean-generic clean-libtool clean-pyexecLTLIBRARIES \ |
| cscopelist-am ctags ctags-am distclean distclean-compile \ |
| distclean-generic distclean-libtool distclean-tags distdir dvi \ |
| dvi-am html html-am info info-am install install-am \ |
| install-data install-data-am install-dvi install-dvi-am \ |
| install-exec install-exec-am install-exec-hook \ |
| install-exec-local install-html install-html-am install-info \ |
| install-info-am install-libexecSCRIPTS install-man install-pdf \ |
| install-pdf-am install-ps install-ps-am \ |
| install-pyexecLTLIBRARIES install-strip install-weavePYTHON \ |
| install-weaveSCRIPTS installcheck installcheck-am installdirs \ |
| maintainer-clean maintainer-clean-generic mostlyclean \ |
| mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ |
| pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \ |
| uninstall-libexecSCRIPTS uninstall-local \ |
| uninstall-pyexecLTLIBRARIES uninstall-weavePYTHON \ |
| uninstall-weaveSCRIPTS |
| |
| |
| include $(abs_top_nlbuild_autotools_dir)/automake/pre.am |
| |
| define set-relocation-path |
| $(AM_V_at)if [[ "$(target_os)" == darwin* ]]; then \ |
| install_name_tool -change `otool -L $(1) | grep -Eo '.*$(2)'` $(call Slashify,$(3))$(2) $(1) ; \ |
| fi |
| endef # change-library-paths |
| |
| # Create a convenience link between the suffixed script and the actual |
| # name by which the script will be installed for non-co-located build |
| # and source directories. |
| |
| @WEAVE_WITH_PYTHON_TRUE@%: %.py |
| @WEAVE_WITH_PYTHON_TRUE@ $(AM_V_LN_S)$(LN_S) $(<) $(@) |
| |
| # Create convenience links so that those that are doing Weave Device |
| # Manager development can run the script right from this directory, |
| # picking up both the Python module and the DLL/DSO, without having to |
| # do a 'make install'. |
| # |
| # Because of automake's VPATH getting in our way, we need to play a |
| # "trick" to get the "buildmodule" DLL/DSO link to work. |
| |
| @WEAVE_WITH_PYTHON_TRUE@all-local: _WeaveDeviceMgr.so $(buildmodule) |
| |
| @WEAVE_WITH_PYTHON_TRUE@_WeaveDeviceMgr.so: _WeaveDeviceMgr.la |
| @WEAVE_WITH_PYTHON_TRUE@ $(AM_V_LN_S)$(LN_S) -f .libs/$(@) $(@) |
| @WEAVE_WITH_PYTHON_TRUE@ $(AM_V_at)if test "${srcmodule}" != "${buildmodule}" && \ |
| @WEAVE_WITH_PYTHON_TRUE@ ! test -L "${buildmodule}"; then \ |
| @WEAVE_WITH_PYTHON_TRUE@ echo " LN ${buildmodule}"; \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(LN_S) "${srcmodule}" "${buildmodule}"; \ |
| @WEAVE_WITH_PYTHON_TRUE@ fi |
| @WEAVE_WITH_PYTHON_TRUE@ $(call set-relocation-path,$(@),libWeaveDeviceManager.$(LIBWEAVE_VERSION_CURRENT).dylib,@loader_path/../.libs/) |
| |
| @WEAVE_WITH_PYTHON_TRUE@install-exec-local: install-exec-binLINKS |
| |
| @WEAVE_WITH_PYTHON_TRUE@uninstall-local: uninstall-exec-binLINKS |
| |
| @WEAVE_WITH_PYTHON_TRUE@install-exec-binLINKS: $(bin_LINKS) |
| @WEAVE_WITH_PYTHON_TRUE@ @$(NORMAL_INSTALL) |
| @WEAVE_WITH_PYTHON_TRUE@ @list='$(bin_LINKS)'; test -n "$(bindir)" || list=; \ |
| @WEAVE_WITH_PYTHON_TRUE@ if test -n "$$list"; then \ |
| @WEAVE_WITH_PYTHON_TRUE@ echo " MKDIR $(DESTDIR)$(bindir)"; \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ |
| @WEAVE_WITH_PYTHON_TRUE@ fi; \ |
| @WEAVE_WITH_PYTHON_TRUE@ for link in $${list}; do \ |
| @WEAVE_WITH_PYTHON_TRUE@ echo " LN $${link}"; \ |
| @WEAVE_WITH_PYTHON_TRUE@ $(LN_S) -f "../`echo ${libexecdir} | sed -e 's,${exec_prefix}/,,g'`/weave-run" "$(DESTDIR)$(bindir)/$${link}"; \ |
| @WEAVE_WITH_PYTHON_TRUE@ done |
| |
| @WEAVE_WITH_PYTHON_TRUE@uninstall-exec-binLINKS: $(bin_LINKS) |
| @WEAVE_WITH_PYTHON_TRUE@ @$(NORMAL_UNINSTALL) |
| @WEAVE_WITH_PYTHON_TRUE@ @list='$(bin_LINKS)'; test -n "$(bindir)" || exit 0; \ |
| @WEAVE_WITH_PYTHON_TRUE@ files=`for p in $$list; do echo "$$p"; done | \ |
| @WEAVE_WITH_PYTHON_TRUE@ sed -e 's,.*/,,;$(transform)'`; \ |
| @WEAVE_WITH_PYTHON_TRUE@ dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir) |
| |
| @WEAVE_WITH_PYTHON_TRUE@install-exec-hook: |
| @WEAVE_WITH_PYTHON_TRUE@ $(call set-relocation-path,$(DESTDIR)$(pyexecdir)/_WeaveDeviceMgr.so,libWeaveDeviceManager.$(LIBWEAVE_VERSION_CURRENT).dylib,@loader_path/../) |
| |
| include $(abs_top_nlbuild_autotools_dir)/automake/post.am |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
