| # Makefile.in generated by automake 1.14.1 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994-2013 Free Software Foundation, Inc. |
| |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # |
| # Copyright (c) 2014-2017 Nest Labs, Inc. |
| # All rights reserved. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # |
| # Description: |
| # This file is the GNU automake template for Weave public |
| # headers, which ensures that a linked shadow set of such headers |
| # is always available before building the source such that the in- |
| # tree source FOR the SDK can compile against public headers exactly |
| # as out-of-tree source AGAINST the SDK would. |
| # |
| |
| VPATH = @srcdir@ |
| am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' |
| am__make_running_with_option = \ |
| case $${target_option-} in \ |
| ?) ;; \ |
| *) echo "am__make_running_with_option: internal error: invalid" \ |
| "target option '$${target_option-}' specified" >&2; \ |
| exit 1;; \ |
| esac; \ |
| has_opt=no; \ |
| sane_makeflags=$$MAKEFLAGS; \ |
| if $(am__is_gnu_make); then \ |
| sane_makeflags=$$MFLAGS; \ |
| else \ |
| case $$MAKEFLAGS in \ |
| *\\[\ \ ]*) \ |
| bs=\\; \ |
| sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ |
| | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ |
| esac; \ |
| fi; \ |
| skip_next=no; \ |
| strip_trailopt () \ |
| { \ |
| flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ |
| }; \ |
| for flg in $$sane_makeflags; do \ |
| test $$skip_next = yes && { skip_next=no; continue; }; \ |
| case $$flg in \ |
| *=*|--*) continue;; \ |
| -*I) strip_trailopt 'I'; skip_next=yes;; \ |
| -*I?*) strip_trailopt 'I';; \ |
| -*O) strip_trailopt 'O'; skip_next=yes;; \ |
| -*O?*) strip_trailopt 'O';; \ |
| -*l) strip_trailopt 'l'; skip_next=yes;; \ |
| -*l?*) strip_trailopt 'l';; \ |
| -[dEDm]) skip_next=yes;; \ |
| -[JT]) skip_next=yes;; \ |
| esac; \ |
| case $$flg in \ |
| *$$target_option*) has_opt=yes; break;; \ |
| esac; \ |
| done; \ |
| test $$has_opt = yes |
| am__make_dryrun = (target_option=n; $(am__make_running_with_option)) |
| am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| target_triplet = @target@ |
| @INET_WANT_ENDPOINT_DNS_TRUE@am__append_1 = $(nl_public_InetLayer_source_dirstem)/DNSResolver.h |
| @INET_WANT_ENDPOINT_RAW_TRUE@am__append_2 = $(nl_public_InetLayer_source_dirstem)/RawEndPoint.h |
| @INET_WANT_ENDPOINT_TCP_TRUE@am__append_3 = $(nl_public_InetLayer_source_dirstem)/TCPEndPoint.h |
| @INET_WANT_ENDPOINT_UDP_TRUE@am__append_4 = $(nl_public_InetLayer_source_dirstem)/UDPEndPoint.h |
| @INET_WANT_ENDPOINT_TUN_TRUE@am__append_5 = $(nl_public_InetLayer_source_dirstem)/TunEndPoint.h |
| @INET_CONFIG_ENABLE_ASYNC_DNS_SOCKETS_TRUE@@INET_WANT_ENDPOINT_DNS_TRUE@@WEAVE_SYSTEM_CONFIG_USE_SOCKETS_TRUE@am__append_6 = $(nl_public_InetLayer_source_dirstem)/AsyncDNSResolverSockets.h |
| subdir = src/include |
| DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ |
| $(srcdir)/BuildConfig.h.in \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/mkinstalldirs \ |
| $(dist_ble_ble_HEADERS) $(dist_ble_device_manager_HEADERS) \ |
| $(dist_inet_HEADERS) $(dist_micro_ecc_HEADERS) \ |
| $(dist_mincrypt_HEADERS) $(dist_system_HEADERS) \ |
| $(dist_warm_HEADERS) $(dist_weave_HEADERS) \ |
| $(dist_weave_core_HEADERS) $(dist_weave_support_base_HEADERS) \ |
| $(dist_weave_support_crypto_HEADERS) \ |
| $(dist_weave_support_logging_HEADERS) \ |
| $(dist_weave_support_platform_HEADERS) \ |
| $(dist_weave_support_verhoeff_HEADERS) $(include_HEADERS) \ |
| $(weave_profiles_base_HEADERS) \ |
| $(weave_profiles_bulk_data_transfer_HEADERS) \ |
| $(weave_profiles_bulk_data_transfer_current_HEADERS) \ |
| $(weave_profiles_bulk_data_transfer_development_HEADERS) \ |
| $(weave_profiles_common_HEADERS) \ |
| $(weave_profiles_data_management_HEADERS) \ |
| $(weave_profiles_data_management_current_HEADERS) \ |
| $(weave_profiles_data_management_legacy_HEADERS) \ |
| $(weave_profiles_device_control_HEADERS) \ |
| $(weave_profiles_device_description_HEADERS) \ |
| $(weave_profiles_echo_HEADERS) \ |
| $(weave_profiles_fabric_provisioning_HEADERS) \ |
| $(weave_profiles_heartbeat_HEADERS) \ |
| $(weave_profiles_locale_HEADERS) \ |
| $(weave_profiles_nestlabs_alarm_HEADERS) \ |
| $(weave_profiles_nestlabs_boiler_HEADERS) \ |
| $(weave_profiles_nestlabs_device_description_HEADERS) \ |
| $(weave_profiles_nestlabs_domestic_hot_water_HEADERS) \ |
| $(weave_profiles_nestlabs_dropcam_legacy_pairing_HEADERS) \ |
| $(weave_profiles_nestlabs_heat_link_HEADERS) \ |
| $(weave_profiles_nestlabs_hvac_equipment_control_HEADERS) \ |
| $(weave_profiles_nestlabs_protect_HEADERS) \ |
| $(weave_profiles_nestlabs_thermostat_HEADERS) \ |
| $(weave_profiles_nestlabs_time_variant_data_HEADERS) \ |
| $(weave_profiles_network_provisioning_HEADERS) \ |
| $(weave_profiles_security_HEADERS) \ |
| $(weave_profiles_service_directory_HEADERS) \ |
| $(weave_profiles_service_provisioning_HEADERS) \ |
| $(weave_profiles_software_update_HEADERS) \ |
| $(weave_profiles_status_report_HEADERS) \ |
| $(weave_profiles_time_HEADERS) \ |
| $(weave_profiles_token_pairing_HEADERS) \ |
| $(weave_profiles_weave_tunneling_HEADERS) |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/build/autoconf/m4/nl_check_project_config_includes.m4 \ |
| $(top_srcdir)/build/autoconf/m4/nl_enable_long_tests.m4 \ |
| $(top_srcdir)/build/autoconf/m4/nl_with_lwip.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| mkinstalldirs = $(SHELL) \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/mkinstalldirs |
| CONFIG_HEADER = BuildConfig.h |
| CONFIG_CLEAN_FILES = |
| CONFIG_CLEAN_VPATH_FILES = |
| AM_V_P = $(am__v_P_@AM_V@) |
| am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) |
| am__v_P_0 = false |
| am__v_P_1 = : |
| AM_V_GEN = $(am__v_GEN_@AM_V@) |
| am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) |
| am__v_GEN_0 = @echo " GEN " $@; |
| am__v_GEN_1 = |
| AM_V_at = $(am__v_at_@AM_V@) |
| am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) |
| am__v_at_0 = @ |
| am__v_at_1 = |
| SOURCES = |
| DIST_SOURCES = |
| am__can_run_installinfo = \ |
| case $$AM_UPDATE_INFO_DIR in \ |
| n|no|NO) false;; \ |
| *) (install-info --version) >/dev/null 2>&1;; \ |
| esac |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| am__uninstall_files_from_dir = { \ |
| test -z "$$files" \ |
| || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
| || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
| $(am__cd) "$$dir" && rm -f $$files; }; \ |
| } |
| am__installdirs = "$(DESTDIR)$(ble_bledir)" \ |
| "$(DESTDIR)$(ble_device_managerdir)" "$(DESTDIR)$(inetdir)" \ |
| "$(DESTDIR)$(micro_eccdir)" "$(DESTDIR)$(mincryptdir)" \ |
| "$(DESTDIR)$(systemdir)" "$(DESTDIR)$(warmdir)" \ |
| "$(DESTDIR)$(weavedir)" "$(DESTDIR)$(weave_coredir)" \ |
| "$(DESTDIR)$(weave_support_basedir)" \ |
| "$(DESTDIR)$(weave_support_cryptodir)" \ |
| "$(DESTDIR)$(weave_support_loggingdir)" \ |
| "$(DESTDIR)$(weave_support_platformdir)" \ |
| "$(DESTDIR)$(weave_support_verhoeffdir)" \ |
| "$(DESTDIR)$(includedir)" \ |
| "$(DESTDIR)$(weave_profiles_basedir)" \ |
| "$(DESTDIR)$(weave_profiles_bulk_data_transferdir)" \ |
| "$(DESTDIR)$(weave_profiles_bulk_data_transfer_currentdir)" \ |
| "$(DESTDIR)$(weave_profiles_bulk_data_transfer_developmentdir)" \ |
| "$(DESTDIR)$(weave_profiles_commondir)" \ |
| "$(DESTDIR)$(weave_profiles_data_managementdir)" \ |
| "$(DESTDIR)$(weave_profiles_data_management_currentdir)" \ |
| "$(DESTDIR)$(weave_profiles_data_management_legacydir)" \ |
| "$(DESTDIR)$(weave_profiles_device_controldir)" \ |
| "$(DESTDIR)$(weave_profiles_device_descriptiondir)" \ |
| "$(DESTDIR)$(weave_profiles_echodir)" \ |
| "$(DESTDIR)$(weave_profiles_fabric_provisioningdir)" \ |
| "$(DESTDIR)$(weave_profiles_heartbeatdir)" \ |
| "$(DESTDIR)$(weave_profiles_localedir)" \ |
| "$(DESTDIR)$(weave_profiles_nestlabs_alarmdir)" \ |
| "$(DESTDIR)$(weave_profiles_nestlabs_boilerdir)" \ |
| "$(DESTDIR)$(weave_profiles_nestlabs_device_descriptiondir)" \ |
| "$(DESTDIR)$(weave_profiles_nestlabs_domestic_hot_waterdir)" \ |
| "$(DESTDIR)$(weave_profiles_nestlabs_dropcam_legacy_pairingdir)" \ |
| "$(DESTDIR)$(weave_profiles_nestlabs_heat_linkdir)" \ |
| "$(DESTDIR)$(weave_profiles_nestlabs_hvac_equipment_controldir)" \ |
| "$(DESTDIR)$(weave_profiles_nestlabs_protectdir)" \ |
| "$(DESTDIR)$(weave_profiles_nestlabs_thermostatdir)" \ |
| "$(DESTDIR)$(weave_profiles_nestlabs_time_variant_datadir)" \ |
| "$(DESTDIR)$(weave_profiles_network_provisioningdir)" \ |
| "$(DESTDIR)$(weave_profiles_securitydir)" \ |
| "$(DESTDIR)$(weave_profiles_service_directorydir)" \ |
| "$(DESTDIR)$(weave_profiles_service_provisioningdir)" \ |
| "$(DESTDIR)$(weave_profiles_software_updatedir)" \ |
| "$(DESTDIR)$(weave_profiles_status_reportdir)" \ |
| "$(DESTDIR)$(weave_profiles_timedir)" \ |
| "$(DESTDIR)$(weave_profiles_token_pairingdir)" \ |
| "$(DESTDIR)$(weave_profiles_weave_tunnelingdir)" |
| HEADERS = $(dist_ble_ble_HEADERS) $(dist_ble_device_manager_HEADERS) \ |
| $(dist_inet_HEADERS) $(dist_micro_ecc_HEADERS) \ |
| $(dist_mincrypt_HEADERS) $(dist_system_HEADERS) \ |
| $(dist_warm_HEADERS) $(dist_weave_HEADERS) \ |
| $(dist_weave_core_HEADERS) $(dist_weave_support_base_HEADERS) \ |
| $(dist_weave_support_crypto_HEADERS) \ |
| $(dist_weave_support_logging_HEADERS) \ |
| $(dist_weave_support_platform_HEADERS) \ |
| $(dist_weave_support_verhoeff_HEADERS) $(include_HEADERS) \ |
| $(weave_profiles_base_HEADERS) \ |
| $(weave_profiles_bulk_data_transfer_HEADERS) \ |
| $(weave_profiles_bulk_data_transfer_current_HEADERS) \ |
| $(weave_profiles_bulk_data_transfer_development_HEADERS) \ |
| $(weave_profiles_common_HEADERS) \ |
| $(weave_profiles_data_management_HEADERS) \ |
| $(weave_profiles_data_management_current_HEADERS) \ |
| $(weave_profiles_data_management_legacy_HEADERS) \ |
| $(weave_profiles_device_control_HEADERS) \ |
| $(weave_profiles_device_description_HEADERS) \ |
| $(weave_profiles_echo_HEADERS) \ |
| $(weave_profiles_fabric_provisioning_HEADERS) \ |
| $(weave_profiles_heartbeat_HEADERS) \ |
| $(weave_profiles_locale_HEADERS) \ |
| $(weave_profiles_nestlabs_alarm_HEADERS) \ |
| $(weave_profiles_nestlabs_boiler_HEADERS) \ |
| $(weave_profiles_nestlabs_device_description_HEADERS) \ |
| $(weave_profiles_nestlabs_domestic_hot_water_HEADERS) \ |
| $(weave_profiles_nestlabs_dropcam_legacy_pairing_HEADERS) \ |
| $(weave_profiles_nestlabs_heat_link_HEADERS) \ |
| $(weave_profiles_nestlabs_hvac_equipment_control_HEADERS) \ |
| $(weave_profiles_nestlabs_protect_HEADERS) \ |
| $(weave_profiles_nestlabs_thermostat_HEADERS) \ |
| $(weave_profiles_nestlabs_time_variant_data_HEADERS) \ |
| $(weave_profiles_network_provisioning_HEADERS) \ |
| $(weave_profiles_security_HEADERS) \ |
| $(weave_profiles_service_directory_HEADERS) \ |
| $(weave_profiles_service_provisioning_HEADERS) \ |
| $(weave_profiles_software_update_HEADERS) \ |
| $(weave_profiles_status_report_HEADERS) \ |
| $(weave_profiles_time_HEADERS) \ |
| $(weave_profiles_token_pairing_HEADERS) \ |
| $(weave_profiles_weave_tunneling_HEADERS) |
| am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ |
| $(LISP)BuildConfig.h.in |
| # Read a list of newline-separated strings from the standard input, |
| # and print each of them once, without duplicates. Input order is |
| # *not* preserved. |
| am__uniquify_input = $(AWK) '\ |
| BEGIN { nonempty = 0; } \ |
| { items[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in items) print i; }; } \ |
| ' |
| # Make sure the list of sources is unique. This is necessary because, |
| # e.g., the same source file might be shared among _SOURCES variables |
| # for different programs/libraries. |
| am__define_uniq_tagged_files = \ |
| list='$(am__tagged_files)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | $(am__uniquify_input)` |
| ETAGS = etags |
| CTAGS = ctags |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| ACLOCAL = @ACLOCAL@ |
| AMTAR = @AMTAR@ |
| AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BLUEZ_BUILD_DIRECTORY = @BLUEZ_BUILD_DIRECTORY@ |
| BLUEZ_CPPFLAGS = @BLUEZ_CPPFLAGS@ |
| BLUEZ_LDFLAGS = @BLUEZ_LDFLAGS@ |
| BLUEZ_LIBS = @BLUEZ_LIBS@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CMP = @CMP@ |
| CONFIG_HAVE_HEAP = @CONFIG_HAVE_HEAP@ |
| CONFIG_HAVE_VCBPRINTF = @CONFIG_HAVE_VCBPRINTF@ |
| CONFIG_HAVE_VSNPRINTF_EX = @CONFIG_HAVE_VSNPRINTF_EX@ |
| CONFIG_NETWORK_LAYER_BLE = @CONFIG_NETWORK_LAYER_BLE@ |
| CONFIG_NETWORK_LAYER_INET = @CONFIG_NETWORK_LAYER_INET@ |
| CONFIG_TARGET_NETWORKS = @CONFIG_TARGET_NETWORKS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CROSS_SDK = @CROSS_SDK@ |
| CROSS_SYSROOT = @CROSS_SYSROOT@ |
| CROSS_TOP = @CROSS_TOP@ |
| CURL_CPPFLAGS = @CURL_CPPFLAGS@ |
| CURL_LDFLAGS = @CURL_LDFLAGS@ |
| CURL_LIBS = @CURL_LIBS@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXDEPMODE = @CXXDEPMODE@ |
| CXXFLAGS = @CXXFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DBUS_CFLAGS = @DBUS_CFLAGS@ |
| DBUS_LIBS = @DBUS_LIBS@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DLLTOOL = @DLLTOOL@ |
| DOT = @DOT@ |
| DOXYGEN = @DOXYGEN@ |
| DOXYGEN_USE_DOT = @DOXYGEN_USE_DOT@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| FGREP = @FGREP@ |
| GENHTML = @GENHTML@ |
| GLIB_CFLAGS = @GLIB_CFLAGS@ |
| GLIB_LIBS = @GLIB_LIBS@ |
| GREP = @GREP@ |
| HAPPY_DNS = @HAPPY_DNS@ |
| HAPPY_PATH = @HAPPY_PATH@ |
| HAPPY_SERVICE = @HAPPY_SERVICE@ |
| HAVE_CXX11 = @HAVE_CXX11@ |
| HAVE_IN6_RTMSG = @HAVE_IN6_RTMSG@ |
| HAVE_LINUX_IF_TUN_H = @HAVE_LINUX_IF_TUN_H@ |
| HAVE_LINUX_IPV6_ROUTE_H = @HAVE_LINUX_IPV6_ROUTE_H@ |
| HAVE_LINUX_ROUTE_H = @HAVE_LINUX_ROUTE_H@ |
| INET_ENDPOINTS = @INET_ENDPOINTS@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| JAR = @JAR@ |
| JAVAC = @JAVAC@ |
| JAVA_HOME = @JAVA_HOME@ |
| JNI_CPPFLAGS = @JNI_CPPFLAGS@ |
| LCOV = @LCOV@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIBWEAVE_VERSION_AGE = @LIBWEAVE_VERSION_AGE@ |
| LIBWEAVE_VERSION_CURRENT = @LIBWEAVE_VERSION_CURRENT@ |
| LIBWEAVE_VERSION_INFO = @LIBWEAVE_VERSION_INFO@ |
| LIBWEAVE_VERSION_REVISION = @LIBWEAVE_VERSION_REVISION@ |
| LIPO = @LIPO@ |
| LNDIR = @LNDIR@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| LWIP_CPPFLAGS = @LWIP_CPPFLAGS@ |
| LWIP_LDFLAGS = @LWIP_LDFLAGS@ |
| LWIP_LIBS = @LWIP_LIBS@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MANIFEST_TOOL = @MANIFEST_TOOL@ |
| MKDIR_P = @MKDIR_P@ |
| NLASSERT_CPPFLAGS = @NLASSERT_CPPFLAGS@ |
| NLASSERT_LDFLAGS = @NLASSERT_LDFLAGS@ |
| NLASSERT_LIBS = @NLASSERT_LIBS@ |
| NLFAULTINJECTION_CPPFLAGS = @NLFAULTINJECTION_CPPFLAGS@ |
| NLFAULTINJECTION_LDFLAGS = @NLFAULTINJECTION_LDFLAGS@ |
| NLFAULTINJECTION_LIBS = @NLFAULTINJECTION_LIBS@ |
| NLIO_CPPFLAGS = @NLIO_CPPFLAGS@ |
| NLIO_LDFLAGS = @NLIO_LDFLAGS@ |
| NLIO_LIBS = @NLIO_LIBS@ |
| NLUNITTEST_CPPFLAGS = @NLUNITTEST_CPPFLAGS@ |
| NLUNITTEST_LDFLAGS = @NLUNITTEST_LDFLAGS@ |
| NLUNITTEST_LIBS = @NLUNITTEST_LIBS@ |
| NL_PROJECT_CONFIG_INCLUDES = @NL_PROJECT_CONFIG_INCLUDES@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| OBJC = @OBJC@ |
| OBJCDEPMODE = @OBJCDEPMODE@ |
| OBJCFLAGS = @OBJCFLAGS@ |
| OBJCOPY = @OBJCOPY@ |
| OBJCXX = @OBJCXX@ |
| OBJCXXCPP = @OBJCXXCPP@ |
| OBJCXXDEPMODE = @OBJCXXDEPMODE@ |
| OBJCXXFLAGS = @OBJCXXFLAGS@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OPENSSL_CPPFLAGS = @OPENSSL_CPPFLAGS@ |
| OPENSSL_LDFLAGS = @OPENSSL_LDFLAGS@ |
| OPENSSL_LIBS = @OPENSSL_LIBS@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PERL = @PERL@ |
| PKG_CONFIG = @PKG_CONFIG@ |
| PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ |
| PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ |
| PRETTY_CHECK = @PRETTY_CHECK@ |
| PRETTY_CHECK_ARGS = @PRETTY_CHECK_ARGS@ |
| PTHREAD_CC = @PTHREAD_CC@ |
| PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ |
| PTHREAD_LIBS = @PTHREAD_LIBS@ |
| PYTHON = @PYTHON@ |
| PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ |
| PYTHON_PLATFORM = @PYTHON_PLATFORM@ |
| PYTHON_PREFIX = @PYTHON_PREFIX@ |
| PYTHON_VERSION = @PYTHON_VERSION@ |
| RANLIB = @RANLIB@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| SOCKETS_CPPFLAGS = @SOCKETS_CPPFLAGS@ |
| SOCKETS_LDFLAGS = @SOCKETS_LDFLAGS@ |
| SOCKETS_LIBS = @SOCKETS_LIBS@ |
| STRIP = @STRIP@ |
| VERSION = @VERSION@ |
| VISIBILITY_CFLAGS = @VISIBILITY_CFLAGS@ |
| VISIBILITY_CXXFLAGS = @VISIBILITY_CXXFLAGS@ |
| VISIBILITY_OBJCFLAGS = @VISIBILITY_OBJCFLAGS@ |
| VISIBILITY_OBJCXXCFLAGS = @VISIBILITY_OBJCXXCFLAGS@ |
| WEAVE_LOGGING_STYLE = @WEAVE_LOGGING_STYLE@ |
| WEAVE_LOGGING_STYLE_ANDROID = @WEAVE_LOGGING_STYLE_ANDROID@ |
| WEAVE_LOGGING_STYLE_EXTERNAL = @WEAVE_LOGGING_STYLE_EXTERNAL@ |
| WEAVE_LOGGING_STYLE_STDIO = @WEAVE_LOGGING_STYLE_STDIO@ |
| WEAVE_LOGGING_STYLE_STDIO_WEAK = @WEAVE_LOGGING_STYLE_STDIO_WEAK@ |
| WEAVE_OPENSSL_TARGET = @WEAVE_OPENSSL_TARGET@ |
| WEAVE_OPENSSL_TARGET_DEFINES = @WEAVE_OPENSSL_TARGET_DEFINES@ |
| WEAVE_SYSTEM_CONFIG_USE_LWIP = @WEAVE_SYSTEM_CONFIG_USE_LWIP@ |
| WEAVE_SYSTEM_CONFIG_USE_SOCKETS = @WEAVE_SYSTEM_CONFIG_USE_SOCKETS@ |
| WEAVE_TARGET_STYLE = @WEAVE_TARGET_STYLE@ |
| WEAVE_TARGET_STYLE_EMBEDDED = @WEAVE_TARGET_STYLE_EMBEDDED@ |
| WEAVE_TARGET_STYLE_UNIX = @WEAVE_TARGET_STYLE_UNIX@ |
| _ACJNI_JAVAC = @_ACJNI_JAVAC@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_nlbuild_autotools_dir = @abs_top_nlbuild_autotools_dir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| ac_ct_OBJC = @ac_ct_OBJC@ |
| ac_ct_OBJCXX = @ac_ct_OBJCXX@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| ax_pthread_config = @ax_pthread_config@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| nlbuild_autotools_stem = @nlbuild_autotools_stem@ |
| oldincludedir = @oldincludedir@ |
| openssl_buildstem = @openssl_buildstem@ |
| pdfdir = @pdfdir@ |
| pkgpyexecdir = @pkgpyexecdir@ |
| pkgpythondir = @pkgpythondir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| pyexecdir = @pyexecdir@ |
| pythondir = @pythondir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| subdirs = @subdirs@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_cpu = @target_cpu@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| |
| # |
| # Build Configuration |
| # |
| |
| # |
| # Default Project-Specific Configuration Headers |
| # |
| |
| # Arrange to install the selected project-specific configuration |
| # headers IF they are located in the build/config source directory. If the |
| # user has specified their own configuration headers, then those |
| # headers are NOT included in the installation directory. |
| # |
| # The 'dist' target appears to have issues with absolute paths, so add |
| # them with relative paths to include_HEADERS which, in turn, is |
| # included in DIST_COMMON which, in turn, is included in DISTFILES |
| # which is what the 'distdir' target depended on by the 'dist' target |
| # works against. |
| include_HEADERS = BuildConfig.h $(NULL) $(subst $(abspath \ |
| $(abs_top_srcdir)),$(top_srcdir),$(filter $(abspath \ |
| $(top_srcdir)/build/config/%),$(abspath \ |
| $(NL_PROJECT_CONFIG_INCLUDES)))) |
| |
| # |
| # First-party Public Headers |
| # |
| |
| # |
| # BleLayer |
| # |
| # At present, the BLE layer is partitioned in two: a production |
| # portion under ble/ and a test protion under device-manager/. |
| # |
| |
| # |
| # BleLayer : ble |
| # |
| # Production Portion |
| # |
| nl_public_BleLayer_ble_source_dirstem = ble |
| nl_public_BleLayer_ble_header_sources = \ |
| $(nl_public_BleLayer_ble_source_dirstem)/BLEEndPoint.h \ |
| $(nl_public_BleLayer_ble_source_dirstem)/Ble.h \ |
| $(nl_public_BleLayer_ble_source_dirstem)/BleApplicationDelegate.h \ |
| $(nl_public_BleLayer_ble_source_dirstem)/BleConfig.h \ |
| $(nl_public_BleLayer_ble_source_dirstem)/BleError.h \ |
| $(nl_public_BleLayer_ble_source_dirstem)/BleLayer.h \ |
| $(nl_public_BleLayer_ble_source_dirstem)/BlePlatformDelegate.h \ |
| $(nl_public_BleLayer_ble_source_dirstem)/BleUUID.h \ |
| $(nl_public_BleLayer_ble_source_dirstem)/WoBle.h \ |
| $(NULL) |
| |
| dist_ble_ble_HEADERS = $(addprefix ../,$(nl_public_BleLayer_ble_header_sources)) |
| nl_public_BleLayer_ble_destination_dirstem = BleLayer |
| ble_bledir = $(includedir)/$(nl_public_BleLayer_ble_destination_dirstem) |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@nl_public_BleLayer_ble_header_paths = $(subst $(nl_public_BleLayer_ble_source_dirstem)/,,$(nl_public_BleLayer_ble_header_sources)) |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@nl_public_BleLayer_ble_header_destinations = $(addprefix $(nl_public_BleLayer_ble_destination_dirstem)/,$(nl_public_BleLayer_ble_header_paths)) |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@nl_public_BleLayer_ble_header_dirs = $(sort $(dir $(nl_public_BleLayer_ble_header_destinations))) |
| |
| # |
| # BleLayer : device-manager |
| # |
| # Test Portion |
| # |
| # The WoBLE interface is currently exercised via the Device Manager |
| # interface. Consequently, when WoBLE testing is enabled, include the |
| # test header as a publicly-exported header. |
| # |
| nl_public_BleLayer_device_manager_source_dirstem = device-manager |
| nl_public_BleLayer_device_manager_header_sources = \ |
| $(nl_public_BleLayer_device_manager_source_dirstem)/WoBleTest.h |
| |
| dist_ble_device_manager_HEADERS = $(addprefix ../,$(nl_public_BleLayer_device_manager_header_sources)) |
| nl_public_BleLayer_device_manager_destination_dirstem = BleLayer |
| ble_device_managerdir = $(includedir)/$(nl_public_BleLayer_device_manager_destination_dirstem) |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_ENABLE_WOBLE_TEST_TRUE@nl_public_BleLayer_device_manager_header_paths = $(subst $(nl_public_BleLayer_device_manager_source_dirstem)/,,$(nl_public_BleLayer_device_manager_header_sources)) |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_ENABLE_WOBLE_TEST_TRUE@nl_public_BleLayer_device_manager_header_destinations = $(addprefix $(nl_public_BleLayer_device_manager_destination_dirstem)/,$(nl_public_BleLayer_device_manager_header_paths)) |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_ENABLE_WOBLE_TEST_TRUE@nl_public_BleLayer_device_manager_header_dirs = $(sort $(dir $(nl_public_BleLayer_device_manager_header_destinations))) |
| |
| # |
| # InetLayer |
| # |
| nl_public_InetLayer_source_dirstem = inet |
| nl_always_InetLayer_header_sources = \ |
| $(nl_public_InetLayer_source_dirstem)/EndPointBasis.h \ |
| $(nl_public_InetLayer_source_dirstem)/IANAConstants.h \ |
| $(nl_public_InetLayer_source_dirstem)/Inet.h \ |
| $(nl_public_InetLayer_source_dirstem)/InetBuffer.h \ |
| $(nl_public_InetLayer_source_dirstem)/InetConfig.h \ |
| $(nl_public_InetLayer_source_dirstem)/InetError.h \ |
| $(nl_public_InetLayer_source_dirstem)/InetInterface.h \ |
| $(nl_public_InetLayer_source_dirstem)/InetLayer.h \ |
| $(nl_public_InetLayer_source_dirstem)/InetLayerBasis.h \ |
| $(nl_public_InetLayer_source_dirstem)/InetLayerEvents.h \ |
| $(nl_public_InetLayer_source_dirstem)/InetTimer.h \ |
| $(nl_public_InetLayer_source_dirstem)/IPAddress.h \ |
| $(nl_public_InetLayer_source_dirstem)/IPPrefix.h \ |
| $(nl_public_InetLayer_source_dirstem)/InetFaultInjection.h \ |
| $(NULL) |
| |
| nl_public_InetLayer_header_sources = \ |
| $(nl_always_InetLayer_header_sources) $(am__append_1) \ |
| $(am__append_2) $(am__append_3) $(am__append_4) \ |
| $(am__append_5) $(am__append_6) |
| nl_dist_InetLayer_header_sources = \ |
| $(nl_always_InetLayer_header_sources) \ |
| $(nl_public_InetLayer_source_dirstem)/DNSResolver.h \ |
| $(nl_public_InetLayer_source_dirstem)/RawEndPoint.h \ |
| $(nl_public_InetLayer_source_dirstem)/TCPEndPoint.h \ |
| $(nl_public_InetLayer_source_dirstem)/UDPEndPoint.h \ |
| $(nl_public_InetLayer_source_dirstem)/TunEndPoint.h \ |
| $(nl_public_InetLayer_source_dirstem)/AsyncDNSResolverSockets.h \ |
| $(NULL) |
| |
| dist_inet_HEADERS = $(addprefix ../,$(nl_dist_InetLayer_header_sources)) |
| nl_public_InetLayer_destination_dirstem = InetLayer |
| nl_public_InetLayer_header_paths = $(subst $(nl_public_InetLayer_source_dirstem)/,,$(nl_public_InetLayer_header_sources)) |
| nl_public_InetLayer_header_destinations = $(addprefix $(nl_public_InetLayer_destination_dirstem)/,$(nl_public_InetLayer_header_paths)) |
| nl_public_InetLayer_header_dirs = $(call Deslashify,$(sort $(dir $(nl_public_InetLayer_header_destinations)))) |
| inetdir = $(includedir)/$(nl_public_InetLayer_destination_dirstem) |
| |
| # |
| # SystemLayer |
| # |
| nl_public_SystemLayer_source_dirstem = system |
| nl_public_SystemLayer_destination_dirstem = SystemLayer |
| nl_public_SystemLayer_header_sources = \ |
| $(nl_public_SystemLayer_source_dirstem)/SystemAlignSize.h \ |
| $(nl_public_SystemLayer_source_dirstem)/SystemConfig.h \ |
| $(nl_public_SystemLayer_source_dirstem)/SystemError.h \ |
| $(nl_public_SystemLayer_source_dirstem)/SystemEvent.h \ |
| $(nl_public_SystemLayer_source_dirstem)/SystemFaultInjection.h \ |
| $(nl_public_SystemLayer_source_dirstem)/SystemStats.h \ |
| $(nl_public_SystemLayer_source_dirstem)/SystemLayer.h \ |
| $(nl_public_SystemLayer_source_dirstem)/SystemMutex.h \ |
| $(nl_public_SystemLayer_source_dirstem)/SystemObject.h \ |
| $(nl_public_SystemLayer_source_dirstem)/SystemTimer.h \ |
| $(nl_public_SystemLayer_source_dirstem)/SystemPacketBuffer.h \ |
| $(NULL) |
| |
| nl_public_SystemLayer_header_paths = $(subst $(nl_public_SystemLayer_source_dirstem)/,,$(nl_public_SystemLayer_header_sources)) |
| nl_public_SystemLayer_header_destinations = $(addprefix $(nl_public_SystemLayer_destination_dirstem)/,$(nl_public_SystemLayer_header_paths)) |
| nl_public_SystemLayer_header_dirs = $(call Deslashify,$(sort $(dir $(nl_public_SystemLayer_header_destinations)))) |
| systemdir = $(includedir)/$(nl_public_SystemLayer_destination_dirstem) |
| dist_system_HEADERS = $(addprefix ../,$(nl_public_SystemLayer_header_sources)) |
| |
| # |
| # Warm |
| # |
| nl_public_Warm_source_dirstem = warm |
| nl_public_Warm_destination_dirstem = Warm |
| nl_public_Warm_header_sources = \ |
| $(nl_public_Warm_source_dirstem)/Warm.h \ |
| $(nl_public_Warm_source_dirstem)/WarmConfig.h \ |
| $(NULL) |
| |
| nl_public_Warm_header_paths = $(subst $(nl_public_Warm_source_dirstem)/,,$(nl_public_Warm_header_sources)) |
| nl_public_Warm_header_destinations = $(addprefix $(nl_public_Warm_destination_dirstem)/,$(nl_public_Warm_header_paths)) |
| nl_public_Warm_header_dirs = $(call Deslashify,$(sort $(dir $(nl_public_Warm_header_destinations)))) |
| warmdir = $(includedir)/$(nl_public_Warm_destination_dirstem) |
| dist_warm_HEADERS = $(addprefix ../,$(nl_public_Warm_header_sources)) |
| |
| # |
| # Weave |
| # |
| |
| # Weave - Top-level |
| # |
| # Right now, this exists exclusive to serve the auto-generated |
| # Weave/WeaveVersion.h header. |
| nl_public_Weave_source_dirstem = Weave |
| nl_public_Weave_destination_dirstem = Weave |
| nl_public_Weave_header_sources = \ |
| $(nl_public_Weave_source_dirstem)/WeaveVersion.h \ |
| $(NULL) |
| |
| nl_public_Weave_header_paths = $(subst $(nl_public_Weave_source_dirstem)/,,$(nl_public_Weave_header_sources)) |
| nl_public_Weave_header_destinations = $(addprefix $(nl_public_Weave_destination_dirstem)/,$(nl_public_Weave_header_paths)) |
| nl_public_Weave_header_dirs = $(call Deslashify,$(sort $(dir $(nl_public_Weave_header_destinations)))) |
| weavedir = $(includedir)/$(nl_public_Weave_destination_dirstem) |
| dist_weave_HEADERS = $(addprefix ./,$(nl_public_Weave_header_sources)) |
| |
| # Weave - Support |
| nl_public_WeaveSupport_source_dirstem = lib/support |
| nl_public_WeaveSupport_destination_dirstem = Weave/Support |
| nl_public_WeaveSupport_base_header_sources = \ |
| $(nl_public_WeaveSupport_source_dirstem)/ASN1.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/ASN1Config.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/ASN1Error.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/ASN1Macros.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/ASN1OID.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/Base64.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/CodeUtils.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/ErrorStr.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/FibonacciUtils.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/FlagUtils.hpp \ |
| $(nl_public_WeaveSupport_source_dirstem)/ManagedNamespace.hpp \ |
| $(nl_public_WeaveSupport_source_dirstem)/MathUtils.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/NLDLLUtil.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/NestCerts.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/PersistedCounter.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/ProfileStringSupport.hpp \ |
| $(nl_public_WeaveSupport_source_dirstem)/RandUtils.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/SerialNumberUtils.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/SerializationUtils.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/TimeUtils.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/TraitEventUtils.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/WeaveCounter.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/WeaveFaultInjection.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/WeaveNames.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/nlargparser.hpp \ |
| $(NULL) |
| |
| nl_public_WeaveSupport_crypto_header_sources = \ |
| $(nl_public_WeaveSupport_source_dirstem)/crypto/AESBlockCipher.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/crypto/CTRMode.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/crypto/DRBG.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/crypto/EllipticCurve.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/crypto/HKDF.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/crypto/HMAC.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/crypto/HashAlgos.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/crypto/WeaveRNG.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/crypto/WeaveCrypto.h \ |
| $(NULL) |
| |
| nl_public_WeaveSupport_logging_header_sources = \ |
| $(nl_public_WeaveSupport_source_dirstem)/logging/WeaveLogging.h \ |
| $(nl_public_WeaveSupport_source_dirstem)/logging/DecodedIPPacket.h \ |
| $(NULL) |
| |
| nl_public_WeaveSupport_verhoeff_header_sources = \ |
| $(nl_public_WeaveSupport_source_dirstem)/verhoeff/Verhoeff.h \ |
| $(NULL) |
| |
| nl_public_WeaveSupport_pairing_code_sources = \ |
| $(nl_public_WeaveSupport_source_dirstem)/pairing-code/PairingCodeUtils.h \ |
| $(NULL) |
| |
| nl_public_WeaveSupport_platform_header_sources = \ |
| $(nl_public_WeaveSupport_source_dirstem)/platform/PersistedStorage.h \ |
| $(NULL) |
| |
| nl_public_WeaveSupport_header_sources = \ |
| $(nl_public_WeaveSupport_base_header_sources) \ |
| $(nl_public_WeaveSupport_crypto_header_sources) \ |
| $(nl_public_WeaveSupport_logging_header_sources) \ |
| $(nl_public_WeaveSupport_verhoeff_header_sources) \ |
| $(nl_public_WeaveSupport_pairing_code_sources) \ |
| $(nl_public_WeaveSupport_platform_header_sources) \ |
| $(NULL) |
| |
| nl_public_WeaveSupport_header_paths = $(subst $(nl_public_WeaveSupport_source_dirstem)/,,$(nl_public_WeaveSupport_header_sources)) |
| nl_public_WeaveSupport_header_destinations = $(addprefix $(nl_public_WeaveSupport_destination_dirstem)/,$(nl_public_WeaveSupport_header_paths)) |
| nl_public_WeaveSupport_header_dirs = $(call Deslashify,$(sort $(dir $(nl_public_WeaveSupport_header_destinations)))) |
| weave_support_basedir = $(includedir)/$(nl_public_WeaveSupport_destination_dirstem) |
| dist_weave_support_base_HEADERS = $(addprefix ../,$(nl_public_WeaveSupport_base_header_sources)) |
| weave_support_cryptodir = $(includedir)/$(nl_public_WeaveSupport_destination_dirstem)/crypto |
| dist_weave_support_crypto_HEADERS = $(addprefix ../,$(nl_public_WeaveSupport_crypto_header_sources)) |
| weave_support_loggingdir = $(includedir)/$(nl_public_WeaveSupport_destination_dirstem)/logging |
| dist_weave_support_logging_HEADERS = $(addprefix ../,$(nl_public_WeaveSupport_logging_header_sources)) |
| weave_support_verhoeffdir = $(includedir)/$(nl_public_WeaveSupport_destination_dirstem)/verhoeff |
| dist_weave_support_verhoeff_HEADERS = $(addprefix ../,$(nl_public_WeaveSupport_verhoeff_header_sources)) |
| weave_support_platformdir = $(includedir)/$(nl_public_WeaveSupport_destination_dirstem)/platform |
| dist_weave_support_platform_HEADERS = $(addprefix ../,$(nl_public_WeaveSupport_platform_header_sources)) |
| |
| # Weave - Core |
| nl_public_WeaveCore_source_dirstem = lib/core |
| nl_public_WeaveCore_destination_dirstem = Weave/Core |
| nl_public_WeaveCore_header_sources = \ |
| $(nl_public_WeaveCore_source_dirstem)/HostPortList.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveKeyIds.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveBinding.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveBDXConfig.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveConfig.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveCore.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveDMConfig.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveTimeConfig.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveEncoding.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveError.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveEventLoggingConfig.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveExchangeMgr.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveFabricState.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveGlobals.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveMessageLayer.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveSecurityMgr.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveServerBase.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveStats.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveTLV.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveTLVData.hpp \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveTLVDebug.hpp \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveTLVTags.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveTLVTypes.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveTLVUtilities.hpp \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveCircularTLVBuffer.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveVendorIdentifiers.hpp \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveTunnelConfig.h \ |
| $(nl_public_WeaveCore_source_dirstem)/WeaveWRMPConfig.h \ |
| $(NULL) |
| |
| nl_public_WeaveCore_header_paths = $(subst $(nl_public_WeaveCore_source_dirstem)/,,$(nl_public_WeaveCore_header_sources)) |
| nl_public_WeaveCore_header_destinations = $(addprefix $(nl_public_WeaveCore_destination_dirstem)/,$(nl_public_WeaveCore_header_paths)) |
| nl_public_WeaveCore_header_dirs = $(call Deslashify,$(sort $(dir $(nl_public_WeaveCore_header_destinations)))) |
| weave_coredir = $(includedir)/$(nl_public_WeaveCore_destination_dirstem) |
| dist_weave_core_HEADERS = $(addprefix ../,$(nl_public_WeaveCore_header_sources)) |
| |
| # Weave - Profiles |
| nl_public_WeaveProfiles_source_dirstem = lib/profiles |
| nl_public_WeaveProfiles_destination_dirstem = Weave/Profiles |
| nl_public_WeaveProfiles_base_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/ProfileCommon.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/WeaveProfiles.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_bulk_data_transfer_development_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/bulk-data-transfer/Development/BDXConstants.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/bulk-data-transfer/Development/BDXDelegate.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/bulk-data-transfer/Development/BDXManagedNamespace.hpp \ |
| $(nl_public_WeaveProfiles_source_dirstem)/bulk-data-transfer/Development/BDXMessages.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/bulk-data-transfer/Development/BDXNode.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/bulk-data-transfer/Development/BDXProtocol.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/bulk-data-transfer/Development/BDXTransferState.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/bulk-data-transfer/Development/BulkDataTransfer.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_bulk_data_transfer_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/bulk-data-transfer/BDXManagedNamespace.hpp \ |
| $(nl_public_WeaveProfiles_source_dirstem)/bulk-data-transfer/BulkDataTransfer.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/bulk-data-transfer/WeaveBdxDelegate.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_common_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/common/CommonProfile.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/common/WeaveMessage.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_data_management_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Binding.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/ClientDataManager.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/ClientNotifier.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/DMClient.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/DMConstants.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/DMPublisher.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/DataManagement.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/ProfileDatabase.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/ProtocolEngine.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/PublisherDataManager.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/TopicIdentifier.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/WdmManagedNamespace.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/MessageDef.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/ViewClient.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/TraitData.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/TraitCatalog.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/SubscriptionEngine.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/SubscriptionClient.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/SubscriptionHandler.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/NotificationEngine.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Command.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/EventLogging.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/EventLoggingTags.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/EventLoggingTypes.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/EventProcessor.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/LogBDXUpload.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/LoggingConfiguration.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/LoggingManagement.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_data_management_legacy_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Legacy/Binding.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Legacy/ClientDataManager.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Legacy/ClientNotifier.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Legacy/DMClient.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Legacy/DMConstants.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Legacy/DMPublisher.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Legacy/DataManagement.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Legacy/ProfileDatabase.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Legacy/ProtocolEngine.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Legacy/PublisherDataManager.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Legacy/TopicIdentifier.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Legacy/WdmManagedNamespace.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_data_management_current_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/DataManagement.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/MessageDef.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/ViewClient.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/TraitData.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/TraitCatalog.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/SubscriptionEngine.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/SubscriptionClient.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/SubscriptionHandler.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/NotificationEngine.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/Command.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/WdmManagedNamespace.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/EventLogging.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/EventLoggingTags.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/EventLoggingTypes.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/EventProcessor.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/LogBDXUpload.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/LoggingConfiguration.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/data-management/Current/LoggingManagement.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_device_control_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/device-control/DeviceControl.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_device_description_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/device-description/DeviceDescription.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_echo_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/echo/WeaveEcho.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_fabric_provisioning_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/fabric-provisioning/FabricProvisioning.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_heartbeat_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/heartbeat/WeaveHeartbeat.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_locale_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/locale/LocaleProfile.hpp \ |
| $(nl_public_WeaveProfiles_source_dirstem)/locale/LocaleStatus.hpp \ |
| $(nl_public_WeaveProfiles_source_dirstem)/locale/LocaleTags.hpp \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_network_provisioning_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/network-provisioning/NetworkInfo.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/network-provisioning/NetworkProvisioning.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_security_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/ApplicationKeysStructSchema.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/ApplicationKeysTrait.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/ApplicationKeysTraitDataSink.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeaveAccessToken.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeaveAppGroupGlobalIds.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeaveApplicationKeys.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeaveCASE.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeaveCert.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeaveDummyGroupKeyStore.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeavePASE.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeaveTAKE.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeaveKeyExport.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeaveKeyExportClient.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeavePasscodes.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeavePrivateKey.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeaveProvBundle.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeaveProvHash.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeaveSecurity.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeaveSecurityDebug.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/security/WeaveSig.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_service_directory_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/service-directory/ServiceDirectory.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_service_provisioning_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/service-provisioning/ServiceProvisioning.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_software_update_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/software-update/SoftwareUpdateProfile.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/software-update/WeaveImageAnnounceServer.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_time_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/time/WeaveTime.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_token_pairing_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/token-pairing/TokenPairing.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_status_report_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/status-report/StatusReportProfile.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_weave_tunneling_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/weave-tunneling/WeaveTunnelAgent.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/weave-tunneling/WeaveTunnelControl.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/weave-tunneling/WeaveTunnelCommon.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/weave-tunneling/WeaveTunnelConnectionMgr.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_nestlabs_alarm_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/vendor/nestlabs/alarm/WeaveAlarm.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_nestlabs_device_description_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/vendor/nestlabs/device-description/NestProductIdentifiers.hpp \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_nestlabs_heat_link_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/vendor/nestlabs/heat-link/HeatLink.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/vendor/nestlabs/heat-link/HeatLinkConstants.h \ |
| $(nl_public_WeaveProfiles_source_dirstem)/vendor/nestlabs/heat-link/HeatLinkTags.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_nestlabs_protect_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/vendor/nestlabs/protect/NestProtect.hpp \ |
| $(nl_public_WeaveProfiles_source_dirstem)/vendor/nestlabs/protect/NestProtectConstants.hpp \ |
| $(nl_public_WeaveProfiles_source_dirstem)/vendor/nestlabs/protect/NestProtectTags.hpp \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_nestlabs_thermostat_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/vendor/nestlabs/thermostat/NestThermostatWeaveConstants.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_nestlabs_time_variant_data_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/vendor/nestlabs/time-variant-data/TimeVariantData.hpp \ |
| $(nl_public_WeaveProfiles_source_dirstem)/vendor/nestlabs/time-variant-data/TimeVariantDataConstants.hpp \ |
| $(nl_public_WeaveProfiles_source_dirstem)/vendor/nestlabs/time-variant-data/TimeVariantDataTags.hpp \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_nestlabs_boiler_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/vendor/nestlabs/boiler/NestBoilerWeaveConstants.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_nestlabs_domestic_hot_water_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/vendor/nestlabs/domestic-hot-water/NestDomesticHotWaterWeaveConstants.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_nestlabs_dropcam_legacy_pairing_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/vendor/nestlabs/dropcam-legacy-pairing/DropcamLegacyPairing.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_nestlabs_hvac_equipment_control_header_sources = \ |
| $(nl_public_WeaveProfiles_source_dirstem)/vendor/nestlabs/hvac/equipment-control/NestHvacEquipmentControlWeaveConstants.h \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_header_sources = \ |
| $(nl_public_WeaveProfiles_base_header_sources) \ |
| $(nl_public_WeaveProfiles_bulk_data_transfer_development_header_sources) \ |
| $(nl_public_WeaveProfiles_bulk_data_transfer_header_sources) \ |
| $(nl_public_WeaveProfiles_common_header_sources) \ |
| $(nl_public_WeaveProfiles_data_management_header_sources) \ |
| $(nl_public_WeaveProfiles_data_management_legacy_header_sources) \ |
| $(nl_public_WeaveProfiles_data_management_current_header_sources) \ |
| $(nl_public_WeaveProfiles_device_control_header_sources) \ |
| $(nl_public_WeaveProfiles_device_description_header_sources) \ |
| $(nl_public_WeaveProfiles_echo_header_sources) \ |
| $(nl_public_WeaveProfiles_fabric_provisioning_header_sources) \ |
| $(nl_public_WeaveProfiles_heartbeat_header_sources) \ |
| $(nl_public_WeaveProfiles_locale_header_sources) \ |
| $(nl_public_WeaveProfiles_network_provisioning_header_sources) \ |
| $(nl_public_WeaveProfiles_security_header_sources) \ |
| $(nl_public_WeaveProfiles_service_directory_header_sources) \ |
| $(nl_public_WeaveProfiles_service_provisioning_header_sources) \ |
| $(nl_public_WeaveProfiles_software_update_header_sources) \ |
| $(nl_public_WeaveProfiles_status_report_header_sources) \ |
| $(nl_public_WeaveProfiles_time_header_sources) \ |
| $(nl_public_WeaveProfiles_token_pairing_header_sources) \ |
| $(nl_public_WeaveProfiles_weave_tunneling_header_sources) \ |
| $(nl_public_WeaveProfiles_nestlabs_alarm_header_sources) \ |
| $(nl_public_WeaveProfiles_nestlabs_device_description_header_sources) \ |
| $(nl_public_WeaveProfiles_nestlabs_heat_link_header_sources) \ |
| $(nl_public_WeaveProfiles_nestlabs_protect_header_sources) \ |
| $(nl_public_WeaveProfiles_nestlabs_thermostat_header_sources) \ |
| $(nl_public_WeaveProfiles_nestlabs_time_variant_data_header_sources) \ |
| $(nl_public_WeaveProfiles_nestlabs_boiler_header_sources) \ |
| $(nl_public_WeaveProfiles_nestlabs_dropcam_legacy_pairing_sources) \ |
| $(nl_public_WeaveProfiles_nestlabs_domestic_hot_water_header_sources) \ |
| $(nl_public_WeaveProfiles_nestlabs_hvac_equipment_control_header_sources) \ |
| $(NULL) |
| |
| nl_public_WeaveProfiles_header_paths = $(subst $(nl_public_WeaveProfiles_source_dirstem)/,,$(nl_public_WeaveProfiles_header_sources)) |
| nl_public_WeaveProfiles_header_destinations = $(addprefix $(nl_public_WeaveProfiles_destination_dirstem)/,$(nl_public_WeaveProfiles_header_paths)) |
| nl_public_WeaveProfiles_header_dirs = $(call Deslashify,$(sort $(dir $(nl_public_WeaveProfiles_header_destinations)))) |
| weave_profiles_basedir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem) |
| weave_profiles_base_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_base_header_sources)) |
| weave_profiles_bulk_data_transferdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/bulk-data-transfer |
| weave_profiles_bulk_data_transfer_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_bulk_data_transfer_header_sources)) |
| weave_profiles_bulk_data_transfer_currentdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/bulk-data-transfer/Current |
| weave_profiles_bulk_data_transfer_current_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_bulk_data_transfer_current_header_sources)) |
| weave_profiles_bulk_data_transfer_developmentdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/bulk-data-transfer/Development |
| weave_profiles_bulk_data_transfer_development_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_bulk_data_transfer_development_header_sources)) |
| weave_profiles_commondir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/common |
| weave_profiles_common_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_common_header_sources)) |
| weave_profiles_data_managementdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/data-management |
| weave_profiles_data_management_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_data_management_header_sources)) |
| weave_profiles_data_management_legacydir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/data-management/Legacy |
| weave_profiles_data_management_legacy_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_data_management_legacy_header_sources)) |
| weave_profiles_data_management_currentdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/data-management/Current |
| weave_profiles_data_management_current_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_data_management_current_header_sources)) |
| weave_profiles_device_controldir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/device-control |
| weave_profiles_device_control_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_device_control_header_sources)) |
| weave_profiles_device_descriptiondir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/device-description |
| weave_profiles_device_description_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_device_description_header_sources)) |
| weave_profiles_echodir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/echo |
| weave_profiles_echo_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_echo_header_sources)) |
| weave_profiles_fabric_provisioningdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/fabric-provisioning |
| weave_profiles_fabric_provisioning_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_fabric_provisioning_header_sources)) |
| weave_profiles_heartbeatdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/heartbeat |
| weave_profiles_heartbeat_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_heartbeat_header_sources)) |
| weave_profiles_localedir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/locale |
| weave_profiles_locale_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_locale_header_sources)) |
| weave_profiles_network_provisioningdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/network-provisioning |
| weave_profiles_network_provisioning_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_network_provisioning_header_sources)) |
| weave_profiles_securitydir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/security |
| weave_profiles_security_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_security_header_sources)) |
| weave_profiles_service_directorydir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/service-directory |
| weave_profiles_service_directory_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_service_directory_header_sources)) |
| weave_profiles_service_provisioningdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/service-provisioning |
| weave_profiles_service_provisioning_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_service_provisioning_header_sources)) |
| weave_profiles_software_updatedir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/software-update |
| weave_profiles_software_update_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_software_update_header_sources)) |
| weave_profiles_status_reportdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/status-report |
| weave_profiles_status_report_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_status_report_header_sources)) |
| weave_profiles_timedir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/time |
| weave_profiles_time_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_time_header_sources)) |
| weave_profiles_token_pairingdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/token-pairing |
| weave_profiles_token_pairing_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_token_pairing_header_sources)) |
| weave_profiles_weave_tunnelingdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/weave-tunneling |
| weave_profiles_weave_tunneling_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_weave_tunneling_header_sources)) |
| weave_profiles_nestlabs_alarmdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/vendor/nestlabs/alarm |
| weave_profiles_nestlabs_alarm_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_nestlabs_alarm_header_sources)) |
| weave_profiles_nestlabs_device_descriptiondir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/vendor/nestlabs/device-description |
| weave_profiles_nestlabs_device_description_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_nestlabs_device_description_header_sources)) |
| weave_profiles_nestlabs_heat_linkdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/vendor/nestlabs/heat-link |
| weave_profiles_nestlabs_heat_link_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_nestlabs_heat_link_header_sources)) |
| weave_profiles_nestlabs_protectdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/vendor/nestlabs/protect |
| weave_profiles_nestlabs_protect_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_nestlabs_protect_header_sources)) |
| weave_profiles_nestlabs_thermostatdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/vendor/nestlabs/thermostat |
| weave_profiles_nestlabs_thermostat_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_nestlabs_thermostat_header_sources)) |
| weave_profiles_nestlabs_time_variant_datadir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/vendor/nestlabs/time-variant-data |
| weave_profiles_nestlabs_time_variant_data_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_nestlabs_time_variant_data_header_sources)) |
| weave_profiles_nestlabs_boilerdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/vendor/nestlabs/boiler |
| weave_profiles_nestlabs_boiler_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_nestlabs_boiler_header_sources)) |
| weave_profiles_nestlabs_dropcam_legacy_pairingdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/vendor/nestlabs/dropcam-legacy-pairing |
| weave_profiles_nestlabs_dropcam_legacy_pairing_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_nestlabs_dropcam_legacy_pairing_sources)) |
| weave_profiles_nestlabs_domestic_hot_waterdir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/vendor/nestlabs/domestic-hot-water |
| weave_profiles_nestlabs_domestic_hot_water_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_nestlabs_domestic_hot_water_header_sources)) |
| weave_profiles_nestlabs_hvac_equipment_controldir = $(includedir)/$(nl_public_WeaveProfiles_destination_dirstem)/vendor/nestlabs/hvac/equipment-control |
| weave_profiles_nestlabs_hvac_equipment_control_HEADERS = $(addprefix ../,$(nl_public_WeaveProfiles_nestlabs_hvac_equipment_control_header_sources)) |
| |
| # |
| # Third-party Public Headers |
| # |
| |
| # |
| # micro-ecc |
| # |
| tps_public_micro_ecc_source_dirstem = ../third_party/micro-ecc/micro-ecc |
| tps_public_micro_ecc_destination_dirstem = micro-ecc |
| tps_public_micro_ecc_header_sources = \ |
| $(tps_public_micro_ecc_source_dirstem)/uECC.h \ |
| $(tps_public_micro_ecc_source_dirstem)/uECC_vli.h \ |
| $(tps_public_micro_ecc_source_dirstem)/types.h \ |
| $(NULL) |
| |
| tps_public_micro_ecc_header_paths = $(subst $(tps_public_micro_ecc_source_dirstem)/,,$(tps_public_micro_ecc_header_sources)) |
| tps_public_micro_ecc_header_destinations = $(addprefix $(tps_public_micro_ecc_destination_dirstem)/,$(tps_public_micro_ecc_header_paths)) |
| tps_public_micro_ecc_header_dirs = $(call Deslashify,$(sort $(dir $(tps_public_micro_ecc_header_destinations)))) |
| micro_eccdir = $(includedir)/$(tps_public_micro_ecc_destination_dirstem) |
| dist_micro_ecc_HEADERS = $(addprefix ../,$(tps_public_micro_ecc_header_sources)) |
| |
| # |
| # mincrypt |
| # |
| tps_public_mincrypt_source_dirstem = ../third_party/android/platform-system/core-mincrypt/include/mincrypt |
| tps_public_mincrypt_destination_dirstem = mincrypt |
| tps_public_mincrypt_header_sources = \ |
| $(tps_public_mincrypt_source_dirstem)/sha.h \ |
| $(tps_public_mincrypt_source_dirstem)/sha256.h \ |
| $(tps_public_mincrypt_source_dirstem)/hash-internal.h \ |
| $(NULL) |
| |
| tps_public_mincrypt_header_paths = $(subst $(tps_public_mincrypt_source_dirstem)/,,$(tps_public_mincrypt_header_sources)) |
| tps_public_mincrypt_header_destinations = $(addprefix $(tps_public_mincrypt_destination_dirstem)/,$(tps_public_mincrypt_header_paths)) |
| tps_public_mincrypt_header_dirs = $(call Deslashify,$(sort $(dir $(tps_public_mincrypt_header_destinations)))) |
| mincryptdir = $(includedir)/$(tps_public_mincrypt_destination_dirstem) |
| dist_mincrypt_HEADERS = $(addprefix ../,$(tps_public_mincrypt_header_sources)) |
| |
| # |
| # All header destinations to create or shadow by symbolic link. |
| # |
| nl_public_headers = \ |
| $(nl_public_BleLayer_ble_header_destinations) \ |
| $(nl_public_BleLayer_device_manager_header_destinations) \ |
| $(nl_public_InetLayer_header_destinations) \ |
| $(nl_public_SystemLayer_header_destinations) \ |
| $(nl_public_Warm_header_destinations) \ |
| $(nl_public_Weave_header_destinations) \ |
| $(nl_public_WeaveSupport_header_destinations) \ |
| $(nl_public_WeaveCore_header_destinations) \ |
| $(nl_public_WeaveProfiles_header_destinations) \ |
| $(NULL) |
| |
| tps_public_headers = \ |
| $(tps_public_micro_ecc_header_destinations) \ |
| $(tps_public_mincrypt_header_destinations) \ |
| $(NULL) |
| |
| BUILT_SOURCES = \ |
| $(nl_public_headers) \ |
| $(tps_public_headers) \ |
| $(NULL) |
| |
| CLEANFILES = \ |
| $(nl_public_headers) \ |
| $(tps_public_headers) \ |
| $(NULL) |
| |
| |
| # |
| # Do not attept to lint or prettyify third-party public |
| # headers. |
| # |
| |
| # |
| # Headers to filter out of PRETTY_FILES |
| # |
| tps_public_header_sources = \ |
| $(dist_micro_ecc_HEADERS) \ |
| $(dist_mincrypt_HEADERS) \ |
| $(NULL) |
| |
| nl_filtered_pretty_files = \ |
| $(include_HEADERS) \ |
| $(tps_public_header_sources) \ |
| $(NULL) |
| |
| PRETTY_FILES = \ |
| $(filter-out $(nl_filtered_pretty_files),$(HEADERS)) \ |
| $(NULL) |
| |
| nl_public_header_dirs = \ |
| $(nl_public_BleLayer_ble_header_dirs) \ |
| $(nl_public_BleLayer_device_manager_header_dirs) \ |
| $(nl_public_InetLayer_header_dirs) \ |
| $(nl_public_SystemLayer_header_dirs) \ |
| $(nl_public_Warm_header_dirs) \ |
| $(nl_public_WeaveCore_header_dirs) \ |
| $(nl_public_WeaveProfiles_header_dirs) \ |
| $(nl_public_WeaveSupport_header_dirs) \ |
| $(nl_public_Weave_header_dirs) \ |
| $(NULL) |
| |
| tps_public_header_dirs = \ |
| $(tps_public_micro_ecc_header_dirs) \ |
| $(tps_public_mincrypt_header_dirs) \ |
| $(NULL) |
| |
| all: $(BUILT_SOURCES) BuildConfig.h |
| $(MAKE) $(AM_MAKEFLAGS) all-am |
| |
| .SUFFIXES: |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ |
| && { if test -f $@; then exit 0; else break; fi; }; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/include/Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign src/include/Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(am__aclocal_m4_deps): |
| |
| BuildConfig.h: stamp-h1 |
| @test -f $@ || rm -f stamp-h1 |
| @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 |
| |
| stamp-h1: $(srcdir)/BuildConfig.h.in $(top_builddir)/config.status |
| @rm -f stamp-h1 |
| cd $(top_builddir) && $(SHELL) ./config.status src/include/BuildConfig.h |
| $(srcdir)/BuildConfig.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) |
| rm -f stamp-h1 |
| touch $@ |
| |
| distclean-hdr: |
| -rm -f BuildConfig.h stamp-h1 |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| install-dist_ble_bleHEADERS: $(dist_ble_ble_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(dist_ble_ble_HEADERS)'; test -n "$(ble_bledir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(ble_bledir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(ble_bledir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(ble_bledir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(ble_bledir)" || exit $$?; \ |
| done |
| |
| uninstall-dist_ble_bleHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_ble_ble_HEADERS)'; test -n "$(ble_bledir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(ble_bledir)'; $(am__uninstall_files_from_dir) |
| install-dist_ble_device_managerHEADERS: $(dist_ble_device_manager_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(dist_ble_device_manager_HEADERS)'; test -n "$(ble_device_managerdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(ble_device_managerdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(ble_device_managerdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(ble_device_managerdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(ble_device_managerdir)" || exit $$?; \ |
| done |
| |
| uninstall-dist_ble_device_managerHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_ble_device_manager_HEADERS)'; test -n "$(ble_device_managerdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(ble_device_managerdir)'; $(am__uninstall_files_from_dir) |
| install-dist_inetHEADERS: $(dist_inet_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(dist_inet_HEADERS)'; test -n "$(inetdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(inetdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(inetdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(inetdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(inetdir)" || exit $$?; \ |
| done |
| |
| uninstall-dist_inetHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_inet_HEADERS)'; test -n "$(inetdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(inetdir)'; $(am__uninstall_files_from_dir) |
| install-dist_micro_eccHEADERS: $(dist_micro_ecc_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(dist_micro_ecc_HEADERS)'; test -n "$(micro_eccdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(micro_eccdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(micro_eccdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(micro_eccdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(micro_eccdir)" || exit $$?; \ |
| done |
| |
| uninstall-dist_micro_eccHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_micro_ecc_HEADERS)'; test -n "$(micro_eccdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(micro_eccdir)'; $(am__uninstall_files_from_dir) |
| install-dist_mincryptHEADERS: $(dist_mincrypt_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(dist_mincrypt_HEADERS)'; test -n "$(mincryptdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(mincryptdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(mincryptdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(mincryptdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(mincryptdir)" || exit $$?; \ |
| done |
| |
| uninstall-dist_mincryptHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_mincrypt_HEADERS)'; test -n "$(mincryptdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(mincryptdir)'; $(am__uninstall_files_from_dir) |
| install-dist_systemHEADERS: $(dist_system_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(dist_system_HEADERS)'; test -n "$(systemdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(systemdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(systemdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(systemdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(systemdir)" || exit $$?; \ |
| done |
| |
| uninstall-dist_systemHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_system_HEADERS)'; test -n "$(systemdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(systemdir)'; $(am__uninstall_files_from_dir) |
| install-dist_warmHEADERS: $(dist_warm_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(dist_warm_HEADERS)'; test -n "$(warmdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(warmdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(warmdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(warmdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(warmdir)" || exit $$?; \ |
| done |
| |
| uninstall-dist_warmHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_warm_HEADERS)'; test -n "$(warmdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(warmdir)'; $(am__uninstall_files_from_dir) |
| install-dist_weaveHEADERS: $(dist_weave_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(dist_weave_HEADERS)'; test -n "$(weavedir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weavedir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weavedir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weavedir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weavedir)" || exit $$?; \ |
| done |
| |
| uninstall-dist_weaveHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_weave_HEADERS)'; test -n "$(weavedir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weavedir)'; $(am__uninstall_files_from_dir) |
| install-dist_weave_coreHEADERS: $(dist_weave_core_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(dist_weave_core_HEADERS)'; test -n "$(weave_coredir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_coredir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_coredir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_coredir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_coredir)" || exit $$?; \ |
| done |
| |
| uninstall-dist_weave_coreHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_weave_core_HEADERS)'; test -n "$(weave_coredir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_coredir)'; $(am__uninstall_files_from_dir) |
| install-dist_weave_support_baseHEADERS: $(dist_weave_support_base_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(dist_weave_support_base_HEADERS)'; test -n "$(weave_support_basedir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_support_basedir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_support_basedir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_support_basedir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_support_basedir)" || exit $$?; \ |
| done |
| |
| uninstall-dist_weave_support_baseHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_weave_support_base_HEADERS)'; test -n "$(weave_support_basedir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_support_basedir)'; $(am__uninstall_files_from_dir) |
| install-dist_weave_support_cryptoHEADERS: $(dist_weave_support_crypto_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(dist_weave_support_crypto_HEADERS)'; test -n "$(weave_support_cryptodir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_support_cryptodir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_support_cryptodir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_support_cryptodir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_support_cryptodir)" || exit $$?; \ |
| done |
| |
| uninstall-dist_weave_support_cryptoHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_weave_support_crypto_HEADERS)'; test -n "$(weave_support_cryptodir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_support_cryptodir)'; $(am__uninstall_files_from_dir) |
| install-dist_weave_support_loggingHEADERS: $(dist_weave_support_logging_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(dist_weave_support_logging_HEADERS)'; test -n "$(weave_support_loggingdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_support_loggingdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_support_loggingdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_support_loggingdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_support_loggingdir)" || exit $$?; \ |
| done |
| |
| uninstall-dist_weave_support_loggingHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_weave_support_logging_HEADERS)'; test -n "$(weave_support_loggingdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_support_loggingdir)'; $(am__uninstall_files_from_dir) |
| install-dist_weave_support_platformHEADERS: $(dist_weave_support_platform_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(dist_weave_support_platform_HEADERS)'; test -n "$(weave_support_platformdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_support_platformdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_support_platformdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_support_platformdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_support_platformdir)" || exit $$?; \ |
| done |
| |
| uninstall-dist_weave_support_platformHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_weave_support_platform_HEADERS)'; test -n "$(weave_support_platformdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_support_platformdir)'; $(am__uninstall_files_from_dir) |
| install-dist_weave_support_verhoeffHEADERS: $(dist_weave_support_verhoeff_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(dist_weave_support_verhoeff_HEADERS)'; test -n "$(weave_support_verhoeffdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_support_verhoeffdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_support_verhoeffdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_support_verhoeffdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_support_verhoeffdir)" || exit $$?; \ |
| done |
| |
| uninstall-dist_weave_support_verhoeffHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_weave_support_verhoeff_HEADERS)'; test -n "$(weave_support_verhoeffdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_support_verhoeffdir)'; $(am__uninstall_files_from_dir) |
| install-includeHEADERS: $(include_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ |
| done |
| |
| uninstall-includeHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_baseHEADERS: $(weave_profiles_base_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_base_HEADERS)'; test -n "$(weave_profiles_basedir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_basedir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_basedir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_basedir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_basedir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_baseHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_base_HEADERS)'; test -n "$(weave_profiles_basedir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_basedir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_bulk_data_transferHEADERS: $(weave_profiles_bulk_data_transfer_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_bulk_data_transfer_HEADERS)'; test -n "$(weave_profiles_bulk_data_transferdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_bulk_data_transferdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_bulk_data_transferdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_bulk_data_transferdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_bulk_data_transferdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_bulk_data_transferHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_bulk_data_transfer_HEADERS)'; test -n "$(weave_profiles_bulk_data_transferdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_bulk_data_transferdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_bulk_data_transfer_currentHEADERS: $(weave_profiles_bulk_data_transfer_current_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_bulk_data_transfer_current_HEADERS)'; test -n "$(weave_profiles_bulk_data_transfer_currentdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_bulk_data_transfer_currentdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_bulk_data_transfer_currentdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_bulk_data_transfer_currentdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_bulk_data_transfer_currentdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_bulk_data_transfer_currentHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_bulk_data_transfer_current_HEADERS)'; test -n "$(weave_profiles_bulk_data_transfer_currentdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_bulk_data_transfer_currentdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_bulk_data_transfer_developmentHEADERS: $(weave_profiles_bulk_data_transfer_development_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_bulk_data_transfer_development_HEADERS)'; test -n "$(weave_profiles_bulk_data_transfer_developmentdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_bulk_data_transfer_developmentdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_bulk_data_transfer_developmentdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_bulk_data_transfer_developmentdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_bulk_data_transfer_developmentdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_bulk_data_transfer_developmentHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_bulk_data_transfer_development_HEADERS)'; test -n "$(weave_profiles_bulk_data_transfer_developmentdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_bulk_data_transfer_developmentdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_commonHEADERS: $(weave_profiles_common_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_common_HEADERS)'; test -n "$(weave_profiles_commondir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_commondir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_commondir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_commondir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_commondir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_commonHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_common_HEADERS)'; test -n "$(weave_profiles_commondir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_commondir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_data_managementHEADERS: $(weave_profiles_data_management_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_data_management_HEADERS)'; test -n "$(weave_profiles_data_managementdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_data_managementdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_data_managementdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_data_managementdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_data_managementdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_data_managementHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_data_management_HEADERS)'; test -n "$(weave_profiles_data_managementdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_data_managementdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_data_management_currentHEADERS: $(weave_profiles_data_management_current_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_data_management_current_HEADERS)'; test -n "$(weave_profiles_data_management_currentdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_data_management_currentdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_data_management_currentdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_data_management_currentdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_data_management_currentdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_data_management_currentHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_data_management_current_HEADERS)'; test -n "$(weave_profiles_data_management_currentdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_data_management_currentdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_data_management_legacyHEADERS: $(weave_profiles_data_management_legacy_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_data_management_legacy_HEADERS)'; test -n "$(weave_profiles_data_management_legacydir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_data_management_legacydir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_data_management_legacydir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_data_management_legacydir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_data_management_legacydir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_data_management_legacyHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_data_management_legacy_HEADERS)'; test -n "$(weave_profiles_data_management_legacydir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_data_management_legacydir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_device_controlHEADERS: $(weave_profiles_device_control_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_device_control_HEADERS)'; test -n "$(weave_profiles_device_controldir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_device_controldir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_device_controldir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_device_controldir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_device_controldir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_device_controlHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_device_control_HEADERS)'; test -n "$(weave_profiles_device_controldir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_device_controldir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_device_descriptionHEADERS: $(weave_profiles_device_description_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_device_description_HEADERS)'; test -n "$(weave_profiles_device_descriptiondir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_device_descriptiondir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_device_descriptiondir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_device_descriptiondir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_device_descriptiondir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_device_descriptionHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_device_description_HEADERS)'; test -n "$(weave_profiles_device_descriptiondir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_device_descriptiondir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_echoHEADERS: $(weave_profiles_echo_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_echo_HEADERS)'; test -n "$(weave_profiles_echodir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_echodir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_echodir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_echodir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_echodir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_echoHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_echo_HEADERS)'; test -n "$(weave_profiles_echodir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_echodir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_fabric_provisioningHEADERS: $(weave_profiles_fabric_provisioning_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_fabric_provisioning_HEADERS)'; test -n "$(weave_profiles_fabric_provisioningdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_fabric_provisioningdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_fabric_provisioningdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_fabric_provisioningdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_fabric_provisioningdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_fabric_provisioningHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_fabric_provisioning_HEADERS)'; test -n "$(weave_profiles_fabric_provisioningdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_fabric_provisioningdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_heartbeatHEADERS: $(weave_profiles_heartbeat_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_heartbeat_HEADERS)'; test -n "$(weave_profiles_heartbeatdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_heartbeatdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_heartbeatdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_heartbeatdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_heartbeatdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_heartbeatHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_heartbeat_HEADERS)'; test -n "$(weave_profiles_heartbeatdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_heartbeatdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_localeHEADERS: $(weave_profiles_locale_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_locale_HEADERS)'; test -n "$(weave_profiles_localedir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_localedir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_localedir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_localedir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_localedir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_localeHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_locale_HEADERS)'; test -n "$(weave_profiles_localedir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_localedir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_nestlabs_alarmHEADERS: $(weave_profiles_nestlabs_alarm_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_nestlabs_alarm_HEADERS)'; test -n "$(weave_profiles_nestlabs_alarmdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_nestlabs_alarmdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_nestlabs_alarmdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_nestlabs_alarmdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_nestlabs_alarmdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_nestlabs_alarmHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_nestlabs_alarm_HEADERS)'; test -n "$(weave_profiles_nestlabs_alarmdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_nestlabs_alarmdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_nestlabs_boilerHEADERS: $(weave_profiles_nestlabs_boiler_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_nestlabs_boiler_HEADERS)'; test -n "$(weave_profiles_nestlabs_boilerdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_nestlabs_boilerdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_nestlabs_boilerdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_nestlabs_boilerdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_nestlabs_boilerdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_nestlabs_boilerHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_nestlabs_boiler_HEADERS)'; test -n "$(weave_profiles_nestlabs_boilerdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_nestlabs_boilerdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_nestlabs_device_descriptionHEADERS: $(weave_profiles_nestlabs_device_description_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_nestlabs_device_description_HEADERS)'; test -n "$(weave_profiles_nestlabs_device_descriptiondir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_nestlabs_device_descriptiondir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_nestlabs_device_descriptiondir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_nestlabs_device_descriptiondir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_nestlabs_device_descriptiondir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_nestlabs_device_descriptionHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_nestlabs_device_description_HEADERS)'; test -n "$(weave_profiles_nestlabs_device_descriptiondir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_nestlabs_device_descriptiondir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_nestlabs_domestic_hot_waterHEADERS: $(weave_profiles_nestlabs_domestic_hot_water_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_nestlabs_domestic_hot_water_HEADERS)'; test -n "$(weave_profiles_nestlabs_domestic_hot_waterdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_nestlabs_domestic_hot_waterdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_nestlabs_domestic_hot_waterdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_nestlabs_domestic_hot_waterdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_nestlabs_domestic_hot_waterdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_nestlabs_domestic_hot_waterHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_nestlabs_domestic_hot_water_HEADERS)'; test -n "$(weave_profiles_nestlabs_domestic_hot_waterdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_nestlabs_domestic_hot_waterdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_nestlabs_dropcam_legacy_pairingHEADERS: $(weave_profiles_nestlabs_dropcam_legacy_pairing_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_nestlabs_dropcam_legacy_pairing_HEADERS)'; test -n "$(weave_profiles_nestlabs_dropcam_legacy_pairingdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_nestlabs_dropcam_legacy_pairingdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_nestlabs_dropcam_legacy_pairingdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_nestlabs_dropcam_legacy_pairingdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_nestlabs_dropcam_legacy_pairingdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_nestlabs_dropcam_legacy_pairingHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_nestlabs_dropcam_legacy_pairing_HEADERS)'; test -n "$(weave_profiles_nestlabs_dropcam_legacy_pairingdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_nestlabs_dropcam_legacy_pairingdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_nestlabs_heat_linkHEADERS: $(weave_profiles_nestlabs_heat_link_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_nestlabs_heat_link_HEADERS)'; test -n "$(weave_profiles_nestlabs_heat_linkdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_nestlabs_heat_linkdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_nestlabs_heat_linkdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_nestlabs_heat_linkdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_nestlabs_heat_linkdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_nestlabs_heat_linkHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_nestlabs_heat_link_HEADERS)'; test -n "$(weave_profiles_nestlabs_heat_linkdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_nestlabs_heat_linkdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_nestlabs_hvac_equipment_controlHEADERS: $(weave_profiles_nestlabs_hvac_equipment_control_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_nestlabs_hvac_equipment_control_HEADERS)'; test -n "$(weave_profiles_nestlabs_hvac_equipment_controldir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_nestlabs_hvac_equipment_controldir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_nestlabs_hvac_equipment_controldir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_nestlabs_hvac_equipment_controldir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_nestlabs_hvac_equipment_controldir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_nestlabs_hvac_equipment_controlHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_nestlabs_hvac_equipment_control_HEADERS)'; test -n "$(weave_profiles_nestlabs_hvac_equipment_controldir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_nestlabs_hvac_equipment_controldir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_nestlabs_protectHEADERS: $(weave_profiles_nestlabs_protect_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_nestlabs_protect_HEADERS)'; test -n "$(weave_profiles_nestlabs_protectdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_nestlabs_protectdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_nestlabs_protectdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_nestlabs_protectdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_nestlabs_protectdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_nestlabs_protectHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_nestlabs_protect_HEADERS)'; test -n "$(weave_profiles_nestlabs_protectdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_nestlabs_protectdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_nestlabs_thermostatHEADERS: $(weave_profiles_nestlabs_thermostat_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_nestlabs_thermostat_HEADERS)'; test -n "$(weave_profiles_nestlabs_thermostatdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_nestlabs_thermostatdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_nestlabs_thermostatdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_nestlabs_thermostatdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_nestlabs_thermostatdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_nestlabs_thermostatHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_nestlabs_thermostat_HEADERS)'; test -n "$(weave_profiles_nestlabs_thermostatdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_nestlabs_thermostatdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_nestlabs_time_variant_dataHEADERS: $(weave_profiles_nestlabs_time_variant_data_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_nestlabs_time_variant_data_HEADERS)'; test -n "$(weave_profiles_nestlabs_time_variant_datadir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_nestlabs_time_variant_datadir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_nestlabs_time_variant_datadir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_nestlabs_time_variant_datadir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_nestlabs_time_variant_datadir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_nestlabs_time_variant_dataHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_nestlabs_time_variant_data_HEADERS)'; test -n "$(weave_profiles_nestlabs_time_variant_datadir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_nestlabs_time_variant_datadir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_network_provisioningHEADERS: $(weave_profiles_network_provisioning_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_network_provisioning_HEADERS)'; test -n "$(weave_profiles_network_provisioningdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_network_provisioningdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_network_provisioningdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_network_provisioningdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_network_provisioningdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_network_provisioningHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_network_provisioning_HEADERS)'; test -n "$(weave_profiles_network_provisioningdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_network_provisioningdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_securityHEADERS: $(weave_profiles_security_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_security_HEADERS)'; test -n "$(weave_profiles_securitydir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_securitydir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_securitydir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_securitydir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_securitydir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_securityHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_security_HEADERS)'; test -n "$(weave_profiles_securitydir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_securitydir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_service_directoryHEADERS: $(weave_profiles_service_directory_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_service_directory_HEADERS)'; test -n "$(weave_profiles_service_directorydir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_service_directorydir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_service_directorydir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_service_directorydir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_service_directorydir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_service_directoryHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_service_directory_HEADERS)'; test -n "$(weave_profiles_service_directorydir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_service_directorydir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_service_provisioningHEADERS: $(weave_profiles_service_provisioning_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_service_provisioning_HEADERS)'; test -n "$(weave_profiles_service_provisioningdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_service_provisioningdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_service_provisioningdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_service_provisioningdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_service_provisioningdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_service_provisioningHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_service_provisioning_HEADERS)'; test -n "$(weave_profiles_service_provisioningdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_service_provisioningdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_software_updateHEADERS: $(weave_profiles_software_update_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_software_update_HEADERS)'; test -n "$(weave_profiles_software_updatedir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_software_updatedir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_software_updatedir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_software_updatedir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_software_updatedir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_software_updateHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_software_update_HEADERS)'; test -n "$(weave_profiles_software_updatedir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_software_updatedir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_status_reportHEADERS: $(weave_profiles_status_report_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_status_report_HEADERS)'; test -n "$(weave_profiles_status_reportdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_status_reportdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_status_reportdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_status_reportdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_status_reportdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_status_reportHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_status_report_HEADERS)'; test -n "$(weave_profiles_status_reportdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_status_reportdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_timeHEADERS: $(weave_profiles_time_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_time_HEADERS)'; test -n "$(weave_profiles_timedir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_timedir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_timedir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_timedir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_timedir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_timeHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_time_HEADERS)'; test -n "$(weave_profiles_timedir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_timedir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_token_pairingHEADERS: $(weave_profiles_token_pairing_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_token_pairing_HEADERS)'; test -n "$(weave_profiles_token_pairingdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_token_pairingdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_token_pairingdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_token_pairingdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_token_pairingdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_token_pairingHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_token_pairing_HEADERS)'; test -n "$(weave_profiles_token_pairingdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_token_pairingdir)'; $(am__uninstall_files_from_dir) |
| install-weave_profiles_weave_tunnelingHEADERS: $(weave_profiles_weave_tunneling_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(weave_profiles_weave_tunneling_HEADERS)'; test -n "$(weave_profiles_weave_tunnelingdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(weave_profiles_weave_tunnelingdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(weave_profiles_weave_tunnelingdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(weave_profiles_weave_tunnelingdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(weave_profiles_weave_tunnelingdir)" || exit $$?; \ |
| done |
| |
| uninstall-weave_profiles_weave_tunnelingHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(weave_profiles_weave_tunneling_HEADERS)'; test -n "$(weave_profiles_weave_tunnelingdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(weave_profiles_weave_tunnelingdir)'; $(am__uninstall_files_from_dir) |
| |
| ID: $(am__tagged_files) |
| $(am__define_uniq_tagged_files); mkid -fID $$unique |
| tags: tags-am |
| TAGS: tags |
| |
| tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| set x; \ |
| here=`pwd`; \ |
| $(am__define_uniq_tagged_files); \ |
| shift; \ |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| if test $$# -gt 0; then \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| "$$@" $$unique; \ |
| else \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$unique; \ |
| fi; \ |
| fi |
| ctags: ctags-am |
| |
| CTAGS: ctags |
| ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| $(am__define_uniq_tagged_files); \ |
| test -z "$(CTAGS_ARGS)$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && $(am__cd) $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) "$$here" |
| cscopelist: cscopelist-am |
| |
| cscopelist-am: $(am__tagged_files) |
| list='$(am__tagged_files)'; \ |
| case "$(srcdir)" in \ |
| [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ |
| *) sdir=$(subdir)/$(srcdir) ;; \ |
| esac; \ |
| for i in $$list; do \ |
| if test -f "$$i"; then \ |
| echo "$(subdir)/$$i"; \ |
| else \ |
| echo "$$sdir/$$i"; \ |
| fi; \ |
| done >> $(top_builddir)/cscope.files |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| distdir: $(DISTFILES) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
| dist-hook |
| check-am: all-am |
| check: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) check-am |
| all-am: Makefile $(HEADERS) BuildConfig.h |
| installdirs: |
| for dir in "$(DESTDIR)$(ble_bledir)" "$(DESTDIR)$(ble_device_managerdir)" "$(DESTDIR)$(inetdir)" "$(DESTDIR)$(micro_eccdir)" "$(DESTDIR)$(mincryptdir)" "$(DESTDIR)$(systemdir)" "$(DESTDIR)$(warmdir)" "$(DESTDIR)$(weavedir)" "$(DESTDIR)$(weave_coredir)" "$(DESTDIR)$(weave_support_basedir)" "$(DESTDIR)$(weave_support_cryptodir)" "$(DESTDIR)$(weave_support_loggingdir)" "$(DESTDIR)$(weave_support_platformdir)" "$(DESTDIR)$(weave_support_verhoeffdir)" "$(DESTDIR)$(includedir)" "$(DESTDIR)$(weave_profiles_basedir)" "$(DESTDIR)$(weave_profiles_bulk_data_transferdir)" "$(DESTDIR)$(weave_profiles_bulk_data_transfer_currentdir)" "$(DESTDIR)$(weave_profiles_bulk_data_transfer_developmentdir)" "$(DESTDIR)$(weave_profiles_commondir)" "$(DESTDIR)$(weave_profiles_data_managementdir)" "$(DESTDIR)$(weave_profiles_data_management_currentdir)" "$(DESTDIR)$(weave_profiles_data_management_legacydir)" "$(DESTDIR)$(weave_profiles_device_controldir)" "$(DESTDIR)$(weave_profiles_device_descriptiondir)" "$(DESTDIR)$(weave_profiles_echodir)" "$(DESTDIR)$(weave_profiles_fabric_provisioningdir)" "$(DESTDIR)$(weave_profiles_heartbeatdir)" "$(DESTDIR)$(weave_profiles_localedir)" "$(DESTDIR)$(weave_profiles_nestlabs_alarmdir)" "$(DESTDIR)$(weave_profiles_nestlabs_boilerdir)" "$(DESTDIR)$(weave_profiles_nestlabs_device_descriptiondir)" "$(DESTDIR)$(weave_profiles_nestlabs_domestic_hot_waterdir)" "$(DESTDIR)$(weave_profiles_nestlabs_dropcam_legacy_pairingdir)" "$(DESTDIR)$(weave_profiles_nestlabs_heat_linkdir)" "$(DESTDIR)$(weave_profiles_nestlabs_hvac_equipment_controldir)" "$(DESTDIR)$(weave_profiles_nestlabs_protectdir)" "$(DESTDIR)$(weave_profiles_nestlabs_thermostatdir)" "$(DESTDIR)$(weave_profiles_nestlabs_time_variant_datadir)" "$(DESTDIR)$(weave_profiles_network_provisioningdir)" "$(DESTDIR)$(weave_profiles_securitydir)" "$(DESTDIR)$(weave_profiles_service_directorydir)" "$(DESTDIR)$(weave_profiles_service_provisioningdir)" "$(DESTDIR)$(weave_profiles_software_updatedir)" "$(DESTDIR)$(weave_profiles_status_reportdir)" "$(DESTDIR)$(weave_profiles_timedir)" "$(DESTDIR)$(weave_profiles_token_pairingdir)" "$(DESTDIR)$(weave_profiles_weave_tunnelingdir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) install-am |
| install-exec: install-exec-am |
| install-data: install-data-am |
| uninstall: uninstall-am |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-am |
| install-strip: |
| if test -z '$(STRIP)'; then \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| install; \ |
| else \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| fi |
| mostlyclean-generic: |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) |
| clean: clean-am |
| |
| clean-am: clean-generic clean-libtool clean-local mostlyclean-am |
| |
| distclean: distclean-am |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-hdr distclean-tags |
| |
| dvi: dvi-am |
| |
| dvi-am: |
| |
| html: html-am |
| |
| html-am: |
| |
| info: info-am |
| |
| info-am: |
| |
| install-data-am: install-dist_ble_bleHEADERS \ |
| install-dist_ble_device_managerHEADERS \ |
| install-dist_inetHEADERS install-dist_micro_eccHEADERS \ |
| install-dist_mincryptHEADERS install-dist_systemHEADERS \ |
| install-dist_warmHEADERS install-dist_weaveHEADERS \ |
| install-dist_weave_coreHEADERS \ |
| install-dist_weave_support_baseHEADERS \ |
| install-dist_weave_support_cryptoHEADERS \ |
| install-dist_weave_support_loggingHEADERS \ |
| install-dist_weave_support_platformHEADERS \ |
| install-dist_weave_support_verhoeffHEADERS \ |
| install-includeHEADERS install-weave_profiles_baseHEADERS \ |
| install-weave_profiles_bulk_data_transferHEADERS \ |
| install-weave_profiles_bulk_data_transfer_currentHEADERS \ |
| install-weave_profiles_bulk_data_transfer_developmentHEADERS \ |
| install-weave_profiles_commonHEADERS \ |
| install-weave_profiles_data_managementHEADERS \ |
| install-weave_profiles_data_management_currentHEADERS \ |
| install-weave_profiles_data_management_legacyHEADERS \ |
| install-weave_profiles_device_controlHEADERS \ |
| install-weave_profiles_device_descriptionHEADERS \ |
| install-weave_profiles_echoHEADERS \ |
| install-weave_profiles_fabric_provisioningHEADERS \ |
| install-weave_profiles_heartbeatHEADERS \ |
| install-weave_profiles_localeHEADERS \ |
| install-weave_profiles_nestlabs_alarmHEADERS \ |
| install-weave_profiles_nestlabs_boilerHEADERS \ |
| install-weave_profiles_nestlabs_device_descriptionHEADERS \ |
| install-weave_profiles_nestlabs_domestic_hot_waterHEADERS \ |
| install-weave_profiles_nestlabs_dropcam_legacy_pairingHEADERS \ |
| install-weave_profiles_nestlabs_heat_linkHEADERS \ |
| install-weave_profiles_nestlabs_hvac_equipment_controlHEADERS \ |
| install-weave_profiles_nestlabs_protectHEADERS \ |
| install-weave_profiles_nestlabs_thermostatHEADERS \ |
| install-weave_profiles_nestlabs_time_variant_dataHEADERS \ |
| install-weave_profiles_network_provisioningHEADERS \ |
| install-weave_profiles_securityHEADERS \ |
| install-weave_profiles_service_directoryHEADERS \ |
| install-weave_profiles_service_provisioningHEADERS \ |
| install-weave_profiles_software_updateHEADERS \ |
| install-weave_profiles_status_reportHEADERS \ |
| install-weave_profiles_timeHEADERS \ |
| install-weave_profiles_token_pairingHEADERS \ |
| install-weave_profiles_weave_tunnelingHEADERS |
| |
| install-dvi: install-dvi-am |
| |
| install-dvi-am: |
| |
| install-exec-am: |
| |
| install-html: install-html-am |
| |
| install-html-am: |
| |
| install-info: install-info-am |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-am |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-am |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-am |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-am |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-am |
| |
| pdf-am: |
| |
| ps: ps-am |
| |
| ps-am: |
| |
| uninstall-am: uninstall-dist_ble_bleHEADERS \ |
| uninstall-dist_ble_device_managerHEADERS \ |
| uninstall-dist_inetHEADERS uninstall-dist_micro_eccHEADERS \ |
| uninstall-dist_mincryptHEADERS uninstall-dist_systemHEADERS \ |
| uninstall-dist_warmHEADERS uninstall-dist_weaveHEADERS \ |
| uninstall-dist_weave_coreHEADERS \ |
| uninstall-dist_weave_support_baseHEADERS \ |
| uninstall-dist_weave_support_cryptoHEADERS \ |
| uninstall-dist_weave_support_loggingHEADERS \ |
| uninstall-dist_weave_support_platformHEADERS \ |
| uninstall-dist_weave_support_verhoeffHEADERS \ |
| uninstall-includeHEADERS uninstall-weave_profiles_baseHEADERS \ |
| uninstall-weave_profiles_bulk_data_transferHEADERS \ |
| uninstall-weave_profiles_bulk_data_transfer_currentHEADERS \ |
| uninstall-weave_profiles_bulk_data_transfer_developmentHEADERS \ |
| uninstall-weave_profiles_commonHEADERS \ |
| uninstall-weave_profiles_data_managementHEADERS \ |
| uninstall-weave_profiles_data_management_currentHEADERS \ |
| uninstall-weave_profiles_data_management_legacyHEADERS \ |
| uninstall-weave_profiles_device_controlHEADERS \ |
| uninstall-weave_profiles_device_descriptionHEADERS \ |
| uninstall-weave_profiles_echoHEADERS \ |
| uninstall-weave_profiles_fabric_provisioningHEADERS \ |
| uninstall-weave_profiles_heartbeatHEADERS \ |
| uninstall-weave_profiles_localeHEADERS \ |
| uninstall-weave_profiles_nestlabs_alarmHEADERS \ |
| uninstall-weave_profiles_nestlabs_boilerHEADERS \ |
| uninstall-weave_profiles_nestlabs_device_descriptionHEADERS \ |
| uninstall-weave_profiles_nestlabs_domestic_hot_waterHEADERS \ |
| uninstall-weave_profiles_nestlabs_dropcam_legacy_pairingHEADERS \ |
| uninstall-weave_profiles_nestlabs_heat_linkHEADERS \ |
| uninstall-weave_profiles_nestlabs_hvac_equipment_controlHEADERS \ |
| uninstall-weave_profiles_nestlabs_protectHEADERS \ |
| uninstall-weave_profiles_nestlabs_thermostatHEADERS \ |
| uninstall-weave_profiles_nestlabs_time_variant_dataHEADERS \ |
| uninstall-weave_profiles_network_provisioningHEADERS \ |
| uninstall-weave_profiles_securityHEADERS \ |
| uninstall-weave_profiles_service_directoryHEADERS \ |
| uninstall-weave_profiles_service_provisioningHEADERS \ |
| uninstall-weave_profiles_software_updateHEADERS \ |
| uninstall-weave_profiles_status_reportHEADERS \ |
| uninstall-weave_profiles_timeHEADERS \ |
| uninstall-weave_profiles_token_pairingHEADERS \ |
| uninstall-weave_profiles_weave_tunnelingHEADERS |
| |
| .MAKE: all check install install-am install-strip |
| |
| .PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ |
| clean-libtool clean-local cscopelist-am ctags ctags-am \ |
| dist-hook distclean distclean-generic distclean-hdr \ |
| distclean-libtool distclean-tags distdir dvi dvi-am html \ |
| html-am info info-am install install-am install-data \ |
| install-data-am install-dist_ble_bleHEADERS \ |
| install-dist_ble_device_managerHEADERS \ |
| install-dist_inetHEADERS install-dist_micro_eccHEADERS \ |
| install-dist_mincryptHEADERS install-dist_systemHEADERS \ |
| install-dist_warmHEADERS install-dist_weaveHEADERS \ |
| install-dist_weave_coreHEADERS \ |
| install-dist_weave_support_baseHEADERS \ |
| install-dist_weave_support_cryptoHEADERS \ |
| install-dist_weave_support_loggingHEADERS \ |
| install-dist_weave_support_platformHEADERS \ |
| install-dist_weave_support_verhoeffHEADERS install-dvi \ |
| install-dvi-am install-exec install-exec-am install-html \ |
| install-html-am install-includeHEADERS install-info \ |
| install-info-am install-man install-pdf install-pdf-am \ |
| install-ps install-ps-am install-strip \ |
| install-weave_profiles_baseHEADERS \ |
| install-weave_profiles_bulk_data_transferHEADERS \ |
| install-weave_profiles_bulk_data_transfer_currentHEADERS \ |
| install-weave_profiles_bulk_data_transfer_developmentHEADERS \ |
| install-weave_profiles_commonHEADERS \ |
| install-weave_profiles_data_managementHEADERS \ |
| install-weave_profiles_data_management_currentHEADERS \ |
| install-weave_profiles_data_management_legacyHEADERS \ |
| install-weave_profiles_device_controlHEADERS \ |
| install-weave_profiles_device_descriptionHEADERS \ |
| install-weave_profiles_echoHEADERS \ |
| install-weave_profiles_fabric_provisioningHEADERS \ |
| install-weave_profiles_heartbeatHEADERS \ |
| install-weave_profiles_localeHEADERS \ |
| install-weave_profiles_nestlabs_alarmHEADERS \ |
| install-weave_profiles_nestlabs_boilerHEADERS \ |
| install-weave_profiles_nestlabs_device_descriptionHEADERS \ |
| install-weave_profiles_nestlabs_domestic_hot_waterHEADERS \ |
| install-weave_profiles_nestlabs_dropcam_legacy_pairingHEADERS \ |
| install-weave_profiles_nestlabs_heat_linkHEADERS \ |
| install-weave_profiles_nestlabs_hvac_equipment_controlHEADERS \ |
| install-weave_profiles_nestlabs_protectHEADERS \ |
| install-weave_profiles_nestlabs_thermostatHEADERS \ |
| install-weave_profiles_nestlabs_time_variant_dataHEADERS \ |
| install-weave_profiles_network_provisioningHEADERS \ |
| install-weave_profiles_securityHEADERS \ |
| install-weave_profiles_service_directoryHEADERS \ |
| install-weave_profiles_service_provisioningHEADERS \ |
| install-weave_profiles_software_updateHEADERS \ |
| install-weave_profiles_status_reportHEADERS \ |
| install-weave_profiles_timeHEADERS \ |
| install-weave_profiles_token_pairingHEADERS \ |
| install-weave_profiles_weave_tunnelingHEADERS installcheck \ |
| installcheck-am installdirs maintainer-clean \ |
| maintainer-clean-generic mostlyclean mostlyclean-generic \ |
| mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ |
| uninstall-am uninstall-dist_ble_bleHEADERS \ |
| uninstall-dist_ble_device_managerHEADERS \ |
| uninstall-dist_inetHEADERS uninstall-dist_micro_eccHEADERS \ |
| uninstall-dist_mincryptHEADERS uninstall-dist_systemHEADERS \ |
| uninstall-dist_warmHEADERS uninstall-dist_weaveHEADERS \ |
| uninstall-dist_weave_coreHEADERS \ |
| uninstall-dist_weave_support_baseHEADERS \ |
| uninstall-dist_weave_support_cryptoHEADERS \ |
| uninstall-dist_weave_support_loggingHEADERS \ |
| uninstall-dist_weave_support_platformHEADERS \ |
| uninstall-dist_weave_support_verhoeffHEADERS \ |
| uninstall-includeHEADERS uninstall-weave_profiles_baseHEADERS \ |
| uninstall-weave_profiles_bulk_data_transferHEADERS \ |
| uninstall-weave_profiles_bulk_data_transfer_currentHEADERS \ |
| uninstall-weave_profiles_bulk_data_transfer_developmentHEADERS \ |
| uninstall-weave_profiles_commonHEADERS \ |
| uninstall-weave_profiles_data_managementHEADERS \ |
| uninstall-weave_profiles_data_management_currentHEADERS \ |
| uninstall-weave_profiles_data_management_legacyHEADERS \ |
| uninstall-weave_profiles_device_controlHEADERS \ |
| uninstall-weave_profiles_device_descriptionHEADERS \ |
| uninstall-weave_profiles_echoHEADERS \ |
| uninstall-weave_profiles_fabric_provisioningHEADERS \ |
| uninstall-weave_profiles_heartbeatHEADERS \ |
| uninstall-weave_profiles_localeHEADERS \ |
| uninstall-weave_profiles_nestlabs_alarmHEADERS \ |
| uninstall-weave_profiles_nestlabs_boilerHEADERS \ |
| uninstall-weave_profiles_nestlabs_device_descriptionHEADERS \ |
| uninstall-weave_profiles_nestlabs_domestic_hot_waterHEADERS \ |
| uninstall-weave_profiles_nestlabs_dropcam_legacy_pairingHEADERS \ |
| uninstall-weave_profiles_nestlabs_heat_linkHEADERS \ |
| uninstall-weave_profiles_nestlabs_hvac_equipment_controlHEADERS \ |
| uninstall-weave_profiles_nestlabs_protectHEADERS \ |
| uninstall-weave_profiles_nestlabs_thermostatHEADERS \ |
| uninstall-weave_profiles_nestlabs_time_variant_dataHEADERS \ |
| uninstall-weave_profiles_network_provisioningHEADERS \ |
| uninstall-weave_profiles_securityHEADERS \ |
| uninstall-weave_profiles_service_directoryHEADERS \ |
| uninstall-weave_profiles_service_provisioningHEADERS \ |
| uninstall-weave_profiles_software_updateHEADERS \ |
| uninstall-weave_profiles_status_reportHEADERS \ |
| uninstall-weave_profiles_timeHEADERS \ |
| uninstall-weave_profiles_token_pairingHEADERS \ |
| uninstall-weave_profiles_weave_tunnelingHEADERS |
| |
| |
| include $(abs_top_nlbuild_autotools_dir)/automake/pre.am |
| |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@$(nl_public_BleLayer_ble_header_dirs): |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@ $(call create-directory) |
| |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@$(nl_public_BleLayer_ble_header_destinations): $(nl_public_BleLayer_ble_destination_dirstem)/%.h: $(abs_srcdir)/../$(nl_public_BleLayer_ble_source_dirstem)/%.h | $(nl_public_BleLayer_ble_header_dirs) |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@ $(call create-link) |
| $(NULL) |
| |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_ENABLE_WOBLE_TEST_TRUE@$(nl_public_BleLayer_device_manager_header_dirs): |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_ENABLE_WOBLE_TEST_TRUE@ $(call create-directory) |
| |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_ENABLE_WOBLE_TEST_TRUE@$(nl_public_BleLayer_device_manager_header_destinations): $(nl_public_BleLayer_device_manager_destination_dirstem)/%.h: $(abs_srcdir)/../$(nl_public_BleLayer_device_manager_source_dirstem)/%.h | $(nl_public_BleLayer_device_manager_header_dirs) |
| @CONFIG_NETWORK_LAYER_BLE_TRUE@@WEAVE_ENABLE_WOBLE_TEST_TRUE@ $(call create-link) |
| |
| $(nl_public_InetLayer_header_dirs): |
| $(call create-directory) |
| |
| $(nl_public_InetLayer_header_destinations): $(nl_public_InetLayer_destination_dirstem)/%.h: $(abs_srcdir)/../$(nl_public_InetLayer_source_dirstem)/%.h | $(nl_public_InetLayer_header_dirs) |
| $(call create-link) |
| |
| $(nl_public_SystemLayer_header_dirs): |
| $(call create-directory) |
| |
| $(nl_public_SystemLayer_header_destinations): $(nl_public_SystemLayer_destination_dirstem)/%.h: $(abs_srcdir)/../$(nl_public_SystemLayer_source_dirstem)/%.h | $(nl_public_SystemLayer_header_dirs) |
| $(call create-link) |
| |
| $(nl_public_Warm_header_dirs): |
| $(call create-directory) |
| |
| $(nl_public_Warm_header_destinations): $(nl_public_Warm_destination_dirstem)/%.h: $(abs_srcdir)/../$(nl_public_Warm_source_dirstem)/%.h | $(nl_public_Warm_header_dirs) |
| $(call create-link) |
| |
| $(nl_public_Weave_header_dirs): |
| $(call create-directory) |
| |
| # Auto-generation targets to force the creation and subsequent check |
| # and re-generation of Weave/WeaveVersion.h. |
| |
| .PHONY: force |
| $(nl_public_Weave_destination_dirstem)/WeaveVersion.h: force |
| |
| define check-file-WeaveVersion.h |
| $(top_srcdir)/build/scripts/gen-weave-version "`cat $(1)`" -o "$(2)" |
| endef # check-file-WeaveVersion.h |
| |
| $(nl_public_Weave_destination_dirstem)/WeaveVersion.h: $(top_builddir)/.local-version | $(nl_public_Weave_destination_dirstem) |
| $(call check-file,WeaveVersion.h) |
| |
| $(nl_public_WeaveSupport_header_dirs): |
| $(call create-directory) |
| |
| $(filter %.h,$(nl_public_WeaveSupport_header_destinations)): $(nl_public_WeaveSupport_destination_dirstem)/%.h: $(abs_srcdir)/../$(nl_public_WeaveSupport_source_dirstem)/%.h | $(nl_public_WeaveSupport_header_dirs) |
| $(call create-link) |
| |
| $(filter %.hpp,$(nl_public_WeaveSupport_header_destinations)): $(nl_public_WeaveSupport_destination_dirstem)/%.hpp: $(abs_srcdir)/../$(nl_public_WeaveSupport_source_dirstem)/%.hpp | $(nl_public_WeaveSupport_header_dirs) |
| $(call create-link) |
| |
| $(nl_public_WeaveCore_header_dirs): |
| $(call create-directory) |
| |
| $(filter %.h,$(nl_public_WeaveCore_header_destinations)): $(nl_public_WeaveCore_destination_dirstem)/%.h: $(abs_srcdir)/../$(nl_public_WeaveCore_source_dirstem)/%.h | $(nl_public_WeaveCore_header_dirs) |
| $(call create-link) |
| |
| $(filter %.hpp,$(nl_public_WeaveCore_header_destinations)): $(nl_public_WeaveCore_destination_dirstem)/%.hpp: $(abs_srcdir)/../$(nl_public_WeaveCore_source_dirstem)/%.hpp | $(nl_public_WeaveCore_header_dirs) |
| $(call create-link) |
| |
| $(nl_public_WeaveProfiles_header_dirs): |
| $(call create-directory) |
| |
| $(filter %.h,$(nl_public_WeaveProfiles_header_destinations)): $(nl_public_WeaveProfiles_destination_dirstem)/%.h: $(abs_srcdir)/../$(nl_public_WeaveProfiles_source_dirstem)/%.h | $(nl_public_WeaveProfiles_header_dirs) |
| $(call create-link) |
| |
| $(filter %.hpp,$(nl_public_WeaveProfiles_header_destinations)): $(nl_public_WeaveProfiles_destination_dirstem)/%.hpp: $(abs_srcdir)/../$(nl_public_WeaveProfiles_source_dirstem)/%.hpp | $(nl_public_WeaveProfiles_header_dirs) |
| $(call create-link) |
| |
| $(tps_public_micro_ecc_header_dirs): |
| $(call create-directory) |
| |
| $(tps_public_micro_ecc_header_destinations): $(tps_public_micro_ecc_destination_dirstem)/%.h: $(abs_srcdir)/../$(tps_public_micro_ecc_source_dirstem)/%.h | $(tps_public_micro_ecc_header_dirs) |
| $(call create-link) |
| |
| $(tps_public_mincrypt_header_dirs): |
| $(call create-directory) |
| |
| $(tps_public_mincrypt_header_destinations): $(tps_public_mincrypt_destination_dirstem)/%.h: $(abs_srcdir)/../$(tps_public_mincrypt_source_dirstem)/%.h | $(tps_public_mincrypt_header_dirs) |
| $(call create-link) |
| |
| # Ensure that auto-generated content such as BuildConfig.h and |
| # Weave/WeaveVersion.h, while public API headers, are scrubbed out of |
| # the source distribution. |
| |
| dist-hook: |
| $(AM_V_at)rm -f $(distdir)/BuildConfig.h |
| $(AM_V_at)rm -f $(distdir)/$(nl_public_Weave_destination_dirstem)/WeaveVersion.h |
| $(AM_V_at)rmdir $(distdir)/$(nl_public_Weave_destination_dirstem) |
| |
| install-headers: install-data |
| |
| # Ensure that any created parent directories from symlinking are also |
| # cleaned up. |
| |
| clean-local: |
| $(AM_V_at)rm -f -r $(nl_public_header_dirs) $(tps_public_header_dirs) |
| |
| include $(abs_top_nlbuild_autotools_dir)/automake/post.am |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |