<html lang="en">
<head>
<title>Overlay Description - Untitled</title>
<meta http-equiv="Content-Type" content="text/html">
<meta name="description" content="Untitled">
<meta name="generator" content="makeinfo 4.13">
<link title="Top" rel="start" href="index.html#Top">
<link rel="up" href="SECTIONS.html#SECTIONS" title="SECTIONS">
<link rel="prev" href="Output-Section-Attributes.html#Output-Section-Attributes" title="Output Section Attributes">
<link href="http://www.gnu.org/software/texinfo/" rel="generator-home" title="Texinfo Homepage">
<!--
This file documents the GNU linker LD
(Sourcery G++ Lite 2011.03-41)
version 2.20.51.

Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.

Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
or any later version published by the Free Software Foundation;
with no Invariant Sections, with no Front-Cover Texts, and with no
Back-Cover Texts.  A copy of the license is included in the
section entitled ``GNU Free Documentation License''.-->
<meta http-equiv="Content-Style-Type" content="text/css">
<style type="text/css"><!--
  pre.display { font-family:inherit }
  pre.format  { font-family:inherit }
  pre.smalldisplay { font-family:inherit; font-size:smaller }
  pre.smallformat  { font-family:inherit; font-size:smaller }
  pre.smallexample { font-size:smaller }
  pre.smalllisp    { font-size:smaller }
  span.sc    { font-variant:small-caps }
  span.roman { font-family:serif; font-weight:normal; } 
  span.sansserif { font-family:sans-serif; font-weight:normal; } 
--></style>
<link rel="stylesheet" type="text/css" href="../cs.css">
</head>
<body>
<div class="node">
<a name="Overlay-Description"></a>
<p>
Previous:&nbsp;<a rel="previous" accesskey="p" href="Output-Section-Attributes.html#Output-Section-Attributes">Output Section Attributes</a>,
Up:&nbsp;<a rel="up" accesskey="u" href="SECTIONS.html#SECTIONS">SECTIONS</a>
<hr>
</div>

<h4 class="subsection">3.6.9 Overlay Description</h4>

<p><a name="index-OVERLAY-462"></a><a name="index-overlays-463"></a>An overlay description provides an easy way to describe sections which
are to be loaded as part of a single memory image but are to be run at
the same memory address.  At run time, some sort of overlay manager will
copy the overlaid sections in and out of the runtime memory address as
required, perhaps by simply manipulating addressing bits.  This approach
can be useful, for example, when a certain region of memory is faster
than another.

   <p>Overlays are described using the <code>OVERLAY</code> command.  The
<code>OVERLAY</code> command is used within a <code>SECTIONS</code> command, like an
output section description.  The full syntax of the <code>OVERLAY</code>
command is as follows:
<pre class="smallexample">     OVERLAY [<var>start</var>] : [NOCROSSREFS] [AT ( <var>ldaddr</var> )]
       {
         <var>secname1</var>
           {
             <var>output-section-command</var>
             <var>output-section-command</var>
             ...
           } [:<var>phdr</var>...] [=<var>fill</var>]
         <var>secname2</var>
           {
             <var>output-section-command</var>
             <var>output-section-command</var>
             ...
           } [:<var>phdr</var>...] [=<var>fill</var>]
         ...
       } [&gt;<var>region</var>] [:<var>phdr</var>...] [=<var>fill</var>]
</pre>
   <p>Everything is optional except <code>OVERLAY</code> (a keyword), and each
section must have a name (<var>secname1</var> and <var>secname2</var> above).  The
section definitions within the <code>OVERLAY</code> construct are identical to
those within the general <code>SECTIONS</code> contruct (see <a href="SECTIONS.html#SECTIONS">SECTIONS</a>),
except that no addresses and no memory regions may be defined for
sections within an <code>OVERLAY</code>.

   <p>The sections are all defined with the same starting address.  The load
addresses of the sections are arranged such that they are consecutive in
memory starting at the load address used for the <code>OVERLAY</code> as a
whole (as with normal section definitions, the load address is optional,
and defaults to the start address; the start address is also optional,
and defaults to the current value of the location counter).

   <p>If the <code>NOCROSSREFS</code> keyword is used, and there any references
among the sections, the linker will report an error.  Since the sections
all run at the same address, it normally does not make sense for one
section to refer directly to another.  See <a href="Miscellaneous-Commands.html#Miscellaneous-Commands">NOCROSSREFS</a>.

   <p>For each section within the <code>OVERLAY</code>, the linker automatically
provides two symbols.  The symbol <code>__load_start_</code><var>secname</var> is
defined as the starting load address of the section.  The symbol
<code>__load_stop_</code><var>secname</var> is defined as the final load address of
the section.  Any characters within <var>secname</var> which are not legal
within C identifiers are removed.  C (or assembler) code may use these
symbols to move the overlaid sections around as necessary.

   <p>At the end of the overlay, the value of the location counter is set to
the start address of the overlay plus the size of the largest section.

   <p>Here is an example.  Remember that this would appear inside a
<code>SECTIONS</code> construct.
<pre class="smallexample">       OVERLAY 0x1000 : AT (0x4000)
        {
          .text0 { o1/*.o(.text) }
          .text1 { o2/*.o(.text) }
        }
</pre>
   <p class="noindent">This will define both &lsquo;<samp><span class="samp">.text0</span></samp>&rsquo; and &lsquo;<samp><span class="samp">.text1</span></samp>&rsquo; to start at
address 0x1000.  &lsquo;<samp><span class="samp">.text0</span></samp>&rsquo; will be loaded at address 0x4000, and
&lsquo;<samp><span class="samp">.text1</span></samp>&rsquo; will be loaded immediately after &lsquo;<samp><span class="samp">.text0</span></samp>&rsquo;.  The
following symbols will be defined if referenced: <code>__load_start_text0</code>,
<code>__load_stop_text0</code>, <code>__load_start_text1</code>,
<code>__load_stop_text1</code>.

   <p>C code to copy overlay <code>.text1</code> into the overlay area might look
like the following.

<pre class="smallexample">       extern char __load_start_text1, __load_stop_text1;
       memcpy ((char *) 0x1000, &amp;__load_start_text1,
               &amp;__load_stop_text1 - &amp;__load_start_text1);
</pre>
   <p>Note that the <code>OVERLAY</code> command is just syntactic sugar, since
everything it does can be done using the more basic commands.  The above
example could have been written identically as follows.

<pre class="smallexample">       .text0 0x1000 : AT (0x4000) { o1/*.o(.text) }
       PROVIDE (__load_start_text0 = LOADADDR (.text0));
       PROVIDE (__load_stop_text0 = LOADADDR (.text0) + SIZEOF (.text0));
       .text1 0x1000 : AT (0x4000 + SIZEOF (.text0)) { o2/*.o(.text) }
       PROVIDE (__load_start_text1 = LOADADDR (.text1));
       PROVIDE (__load_stop_text1 = LOADADDR (.text1) + SIZEOF (.text1));
       . = 0x1000 + MAX (SIZEOF (.text0), SIZEOF (.text1));
</pre>
   </body></html>