//------------------------------------------------------------------------------
// <copyright file="wmi_thin.h" company="Atheros">
//    Copyright (c) 2004-2010 Atheros Corporation.  All rights reserved.
// 
// The software source and binaries included in this development package are
// licensed, not sold. You, or your company, received the package under one
// or more license agreements. The rights granted to you are specifically
// listed in these license agreement(s). All other rights remain with Atheros
// Communications, Inc., its subsidiaries, or the respective owner including
// those listed on the included copyright notices.  Distribution of any
// portion of this package must be in strict compliance with the license
// agreement(s) terms.
// </copyright>
// 
// <summary>
// 	Wifi driver for AR6003
// </summary>
//
//------------------------------------------------------------------------------
//==============================================================================
// Author(s): ="Atheros"
//==============================================================================

/*
 * This file contains the definitions of the WMI protocol specified in the
 * Wireless Module Interface (WMI).  It includes definitions of all the
 * commands and events. Commands are messages from the host to the WM.
 * Events and Replies are messages from the WM to the host.
 *
 * Ownership of correctness in regards to WMI commands
 * belongs to the host driver and the WM is not required to validate
 * parameters for value, proper range, or any other checking.
 *
 */

#ifndef _WMI_THIN_H_
#define _WMI_THIN_H_

#ifdef __cplusplus
extern "C" {
#endif


typedef enum {
    WMI_THIN_CONFIG_CMDID =  0x8000, // WMI_THIN_RESERVED_START 
    WMI_THIN_SET_MIB_CMDID,
    WMI_THIN_GET_MIB_CMDID,
    WMI_THIN_JOIN_CMDID,
    WMI_THIN_CONNECT_CMDID,
    WMI_THIN_RESET_CMDID,
    /* add new CMDID's here */
    WMI_THIN_RESERVED_END_CMDID = 0x8fff // WMI_THIN_RESERVED_END
} WMI_THIN_COMMAND_ID;

typedef enum{
    TEMPLATE_FRM_FIRST = 0,
    TEMPLATE_FRM_PROBE_REQ =TEMPLATE_FRM_FIRST,
    TEMPLATE_FRM_BEACON,
    TEMPLATE_FRM_PROBE_RESP,
    TEMPLATE_FRM_NULL,
    TEMPLATE_FRM_QOS_NULL,
    TEMPLATE_FRM_PSPOLL,
    TEMPLATE_FRM_MAX
}WMI_TEMPLATE_FRM_TYPE;

/* TEMPLATE_FRM_LEN... represent the maximum allowable
 * data lengths (bytes) for each frame type */
#define TEMPLATE_FRM_LEN_PROBE_REQ  (256) /* Symbian dictates a minimum of 256 for these 3 frame types */
#define TEMPLATE_FRM_LEN_BEACON     (256)
#define TEMPLATE_FRM_LEN_PROBE_RESP (256)
#define TEMPLATE_FRM_LEN_NULL       (32)
#define TEMPLATE_FRM_LEN_QOS_NULL   (32)
#define TEMPLATE_FRM_LEN_PSPOLL     (32)
#define TEMPLATE_FRM_LEN_SUM (TEMPLATE_FRM_LEN_PROBE_REQ + TEMPLATE_FRM_LEN_BEACON + TEMPLATE_FRM_LEN_PROBE_RESP + \
            TEMPLATE_FRM_LEN_NULL + TEMPLATE_FRM_LEN_QOS_NULL + TEMPLATE_FRM_LEN_PSPOLL)


/* MAC Header Build Rules */
/*  These values allow the host to configure the 
 *  target code that is responsible for constructing
 *  the MAC header.  In cases where the MAC header
 *  is provided by the host framework, the target
 *  has a diminished responsibility over what fields
 *  it must write. This will vary from framework to framework.
 *  Symbian requires different behavior from MAC80211 which
 *  requires different behavior from MS Native Wifi. */
#define WMI_WRT_VER_TYPE    0x00000001
#define WMI_WRT_DURATION    0x00000002
#define WMI_WRT_DIRECTION   0x00000004
#define WMI_WRT_POWER       0x00000008
#define WMI_WRT_WEP         0x00000010
#define WMI_WRT_MORE        0x00000020
#define WMI_WRT_BSSID       0x00000040
#define WMI_WRT_QOS         0x00000080
#define WMI_WRT_SEQNO       0x00000100
#define WMI_GUARD_TX        0x00000200 /* prevents TX ops that are not allowed for a current state */
#define WMI_WRT_DEFAULT_CONFIG  (WMI_WRT_VER_TYPE | WMI_WRT_DURATION | WMI_WRT_DIRECTION | \
                                 WMI_WRT_POWER | WMI_WRT_MORE | WMI_WRT_WEP | WMI_WRT_BSSID | \
                                 WMI_WRT_QOS | WMI_WRT_SEQNO | WMI_GUARD_TX)

/* WMI_THIN_CONFIG_TXCOMPLETE -- Used to configure the params and content for 
 *  TX Complete messages the will come from the Target.  these messages are 
 *  disabled by default but can be enabled using this structure and the 
 *  WMI_THIN_CONFIG_CMDID. */
typedef PREPACK struct {
    A_UINT8     version; /* the versioned type of messages to use or 0 to disable */
    A_UINT8     countThreshold; /* msg count threshold triggering a tx complete message */
    A_UINT16    timeThreshold; /* timeout interval in MSEC triggering a tx complete message */       
} POSTPACK WMI_THIN_CONFIG_TXCOMPLETE;

/* WMI_THIN_CONFIG_DECRYPT_ERR -- Used to configure behavior for received frames 
 *  that have decryption errors.  The default behavior is to discard the frame
 *  without notification. Alternately, the MAC Header is forwarded to the host 
 *  with the failed status. */
typedef PREPACK struct {
    A_UINT8     enable; /* 1 == send decrypt errors to the host, 0 == don't */
    A_UINT8     reserved[3]; /* align padding */
} POSTPACK WMI_THIN_CONFIG_DECRYPT_ERR;

/* WMI_THIN_CONFIG_TX_MAC_RULES -- Used to configure behavior for transmitted
 *  frames that require partial MAC header construction. These rules 
 *  are used by the target to indicate which fields need to be written. */
typedef PREPACK struct {
    A_UINT32    rules; /* combination of WMI_WRT_... values */     
} POSTPACK WMI_THIN_CONFIG_TX_MAC_RULES;

/* WMI_THIN_CONFIG_RX_FILTER_RULES -- Used to configure behavior for received
 *  frames as to which frames should get forwarded to the host and which
 *  should get processed internally. */
typedef PREPACK struct {
    A_UINT32    rules; /* combination of WMI_FILT_... values */     
} POSTPACK WMI_THIN_CONFIG_RX_FILTER_RULES;


/* WMI_THIN_CONFIG_CIPHER_ENCAP -- Used to configure behavior for both
 * TX and RX frames regarding security cipher encapsulation. The host may specify 
 * whether or not the firmware is responsible for cipher 
 * encapsulation.  If the firmware is responsible it will add the security header
 * and trailer for TX frames and remove the header and trailer for Rx frames. Also,
 * the firmware will examine the resource counter if any and behave appropriately when
 * a bad value is detected.  If the host indicates responsibility for encapsulation 
 * then it is responsible for all aspects of encapsulation, however the device will 
 * still perform the encryption and decryption of the frame payload if a key has 
 * been provided. */
typedef PREPACK struct {
    A_UINT8     enable; /* enables/disables firmware cipher encapsulation */     
    A_UINT8     reserved[3]; /* align padding */
} POSTPACK WMI_THIN_CONFIG_CIPHER_ENCAP;

/* WMI_THIN_CONFIG_CMD -- Used to contain some combination of the above
 *  WMI_THIN_CONFIG_... structures. The actual combination is indicated 
 *  by the value of cfgField. Each bit in this field corresponds to 
 *  one of the above structures. */
typedef PREPACK struct {
#define WMI_THIN_CFG_TXCOMP         0x00000001
#define WMI_THIN_CFG_DECRYPT        0x00000002
#define WMI_THIN_UNUSED1            0x00000004  /* used to be WMI_THIN_CFG_MAC_RULES */
#define WMI_THIN_CFG_FILTER_RULES   0x00000008
#define WMI_THIN_CFG_CIPHER_ENCAP   0x00000010
    A_UINT32    cfgField;   /* combination of WMI_THIN_CFG_... describes contents of config command */
    A_UINT16    length;     /* length in bytes of appended sub-commands */        
    A_UINT8     reserved[2];   /* align padding */
} POSTPACK WMI_THIN_CONFIG_CMD;

/* MIB Access Identifiers tailored for Symbian. */
enum {
    MIB_ID_STA_MAC = 1,             // [READONLY]
    MIB_ID_RX_LIFE_TIME,            // [NOT IMPLEMENTED]
    MIB_ID_SLOT_TIME,               // [READ/WRITE]
    MIB_ID_RTS_THRESHOLD,           // [READ/WRITE]
    MIB_ID_CTS_TO_SELF,             // [READ/WRITE]
    MIB_ID_TEMPLATE_FRAME,          // [WRITE ONLY]
    MIB_ID_RXFRAME_FILTER,          // [READ/WRITE]
    MIB_ID_BEACON_FILTER_TABLE,     // [WRITE ONLY]
    MIB_ID_BEACON_FILTER,           // [READ/WRITE]
    MIB_ID_BEACON_LOST_COUNT,       // [WRITE ONLY]
    MIB_ID_RSSI_THRESHOLD,          // [WRITE ONLY]
    MIB_ID_HT_CAP,                  // [NOT IMPLEMENTED]
    MIB_ID_HT_OP,                   // [NOT IMPLEMENTED]
    MIB_ID_HT_2ND_BEACON,           // [NOT IMPLEMENTED]
    MIB_ID_HT_BLOCK_ACK,            // [NOT IMPLEMENTED]
    MIB_ID_PREAMBLE,                // [READ/WRITE]
    /*MIB_ID_GROUP_ADDR_TABLE,*/
    /*MIB_ID_WEP_DEFAULT_KEY_ID */  // satisfied by wmi_addKey_cmd()
    /*MIB_ID_TX_POWER */
    /*MIB_ID_ARP_IP_TABLE */
    /*MIB_ID_SLEEP_MODE */
    /*MIB_ID_WAKE_INTERVAL*/
    /*MIB_ID_STAT_TABLE*/
    /*MIB_ID_IBSS_PWR_SAVE*/
    /*MIB_ID_COUNTERS_TABLE*/
    /*MIB_ID_ETHERTYPE_FILTER*/
    /*MIB_ID_BC_UDP_FILTER*/
       
};

typedef PREPACK struct {
    A_UINT8 addr[ATH_MAC_LEN];
} POSTPACK WMI_THIN_MIB_STA_MAC;

typedef PREPACK struct {
    A_UINT32 time; // units == msec
} POSTPACK WMI_THIN_MIB_RX_LIFE_TIME;

typedef PREPACK struct {
    A_UINT8 enable; //1 = on, 0 = off
} POSTPACK WMI_THIN_MIB_CTS_TO_SELF;

typedef PREPACK struct {
    A_UINT32 time; // units == usec
} POSTPACK WMI_THIN_MIB_SLOT_TIME;

typedef PREPACK struct {
    A_UINT16 length; //units == bytes
} POSTPACK WMI_THIN_MIB_RTS_THRESHOLD;

typedef PREPACK struct {
    A_UINT8 type; // type of frame
    A_UINT8 rate; // tx rate to be used (one of WMI_BIT_RATE)
    A_UINT16 length; // num bytes following this structure as the template data
} POSTPACK WMI_THIN_MIB_TEMPLATE_FRAME;

typedef PREPACK struct {
#define FRAME_FILTER_PROMISCUOUS 0x00000001
#define FRAME_FILTER_BSSID       0x00000002
    A_UINT32 filterMask; 
} POSTPACK WMI_THIN_MIB_RXFRAME_FILTER;


#define IE_FILTER_TREATMENT_CHANGE 1
#define IE_FILTER_TREATMENT_APPEAR 2

typedef PREPACK struct {
    A_UINT8 ie;
    A_UINT8 treatment;
} POSTPACK WMI_THIN_MIB_BEACON_FILTER_TABLE;

typedef PREPACK struct {
    A_UINT8 ie;
    A_UINT8 treatment;
    A_UINT8 oui[3];
    A_UINT8 type;
    A_UINT16 version;
} POSTPACK WMI_THIN_MIB_BEACON_FILTER_TABLE_OUI;

typedef PREPACK struct {
    A_UINT16 numElements;
    A_UINT8 entrySize; // sizeof(WMI_THIN_MIB_BEACON_FILTER_TABLE) on host cpu may be 2 may be 4
    A_UINT8 reserved;
} POSTPACK WMI_THIN_MIB_BEACON_FILTER_TABLE_HEADER; 

typedef PREPACK struct {
    A_UINT32 count; /* num beacons between deliveries */
    A_UINT8 enable;
    A_UINT8 reserved[3];
} POSTPACK WMI_THIN_MIB_BEACON_FILTER;

typedef PREPACK struct {
    A_UINT32 count; /* num consec lost beacons after which send event */
} POSTPACK WMI_THIN_MIB_BEACON_LOST_COUNT;

typedef PREPACK struct {
    A_UINT8 rssi; /* the low threshold which can trigger an event warning */
    A_UINT8 tolerance; /* the range above and below the threshold to prevent event flooding to the host. */
    A_UINT8 count; /* the sample count of consecutive frames necessary to trigger an event. */
    A_UINT8 reserved[1]; /* padding */
} POSTPACK WMI_THIN_MIB_RSSI_THRESHOLD;


typedef PREPACK struct {
    A_UINT32 cap;
    A_UINT32 rxRateField;
    A_UINT32 beamForming;
    A_UINT8 addr[ATH_MAC_LEN];
    A_UINT8 enable;        
    A_UINT8 stbc;
    A_UINT8 maxAMPDU;    
    A_UINT8 msduSpacing;
    A_UINT8 mcsFeedback;   
    A_UINT8 antennaSelCap;    
} POSTPACK WMI_THIN_MIB_HT_CAP;

typedef PREPACK struct {
    A_UINT32 infoField;
    A_UINT32 basicRateField;
    A_UINT8 protection;
    A_UINT8 secondChanneloffset;
    A_UINT8 channelWidth;
    A_UINT8 reserved;
} POSTPACK WMI_THIN_MIB_HT_OP;

typedef PREPACK struct {
#define SECOND_BEACON_PRIMARY   1
#define SECOND_BEACON_EITHER    2
#define SECOND_BEACON_SECONDARY 3
    A_UINT8 cfg;
    A_UINT8 reserved[3]; /* padding */
} POSTPACK WMI_THIN_MIB_HT_2ND_BEACON;

typedef PREPACK struct {
    A_UINT8 txTIDField;
    A_UINT8 rxTIDField;
    A_UINT8 reserved[2]; /* padding */
} POSTPACK WMI_THIN_MIB_HT_BLOCK_ACK;

typedef PREPACK struct {
    A_UINT8 enableLong; // 1 == long preamble, 0 == short preamble
    A_UINT8 reserved[3];
} POSTPACK WMI_THIN_MIB_PREAMBLE;

typedef PREPACK struct {    
    A_UINT16    length;     /* the length in bytes of the appended MIB data */
    A_UINT8     mibID;      /* the ID of the MIB element being set */
    A_UINT8     reserved; /* align padding */
} POSTPACK WMI_THIN_SET_MIB_CMD;

typedef PREPACK struct {    
    A_UINT8     mibID;      /* the ID of the MIB element being set */
    A_UINT8     reserved[3]; /* align padding */
} POSTPACK WMI_THIN_GET_MIB_CMD;

typedef PREPACK struct {
    A_UINT32    basicRateMask; /* bit mask of basic rates */
    A_UINT32    beaconIntval; /* TUs */
    A_UINT16    atimWindow; /* TUs */
    A_UINT16    channel; /* frequency in Mhz */
    A_UINT8     networkType; /* INFRA_NETWORK | ADHOC_NETWORK */
    A_UINT8     ssidLength; /* 0 - 32 */
    A_UINT8     probe;      /* != 0 : issue probe req at start */
    A_UINT8     reserved;   /* alignment */    
    A_UCHAR     ssid[WMI_MAX_SSID_LEN];    
    A_UINT8     bssid[ATH_MAC_LEN];
} POSTPACK WMI_THIN_JOIN_CMD;

typedef PREPACK struct {
    A_UINT16 dtim; /* dtim interval in num beacons */
    A_UINT16 aid; /* 80211 association ID from Assoc resp */   
} POSTPACK WMI_THIN_CONNECT_CMD;

typedef PREPACK struct {
    A_UINT8 reserved[4];
} POSTPACK WMI_THIN_RESET_CMD;

typedef enum {
    WMI_THIN_EVENTID_RESERVED_START           = 0x8000,
    WMI_THIN_GET_MIB_EVENTID,
    WMI_THIN_JOIN_EVENTID,
    
    /* Add new THIN EVENTID's here */
    WMI_THIN_EVENTID_RESERVED_END           = 0x8fff    
} WMI_THIN_EVENT_ID;

/* Possible values for WMI_THIN_JOIN_EVENT.result */
typedef enum {
    WMI_THIN_JOIN_RES_SUCCESS = 0, // device has joined the network
    WMI_THIN_JOIN_RES_FAIL, // device failed for unspecified reason
    WMI_THIN_JOIN_RES_TIMEOUT, // device failed due to no beacon rx in time limit
    WMI_THIN_JOIN_RES_BAD_PARAM, // device failed due to bad cmd param.
    WMI_THIN_JOIN_RES_IBSS_START, // device started new IBSS network.
}WMI_THIN_JOIN_RESULT;

typedef PREPACK struct {
    A_UINT8 result; /* the result of the join cmd. one of WMI_THIN_JOIN_RESULT */
    A_UINT8 reserved[3]; /* alignment */
} POSTPACK WMI_THIN_JOIN_EVENT;

#ifdef __cplusplus
}
#endif

#endif /* _WMI_THIN_H_ */