# Makefile.in generated by automake 1.11.6 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

VPATH = @srcdir@
am__make_dryrun = \
  { \
    am__dry=no; \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
      *) \
        for am__flg in $$MAKEFLAGS; do \
          case $$am__flg in \
            *=*|--*) ;; \
            *n*) am__dry=yes; break;; \
          esac; \
        done;; \
    esac; \
    test $$am__dry = yes; \
  }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
@BUILD_FOR_PERF_EVENT_TRUE@am__append_1 = operf.1 \
@BUILD_FOR_PERF_EVENT_TRUE@			ocount.1

subdir = doc
DIST_COMMON = $(dist_html_DATA) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(srcdir)/ocount.1.in \
	$(srcdir)/op-check-perfevents.1.in $(srcdir)/opannotate.1.in \
	$(srcdir)/oparchive.1.in $(srcdir)/opcontrol.1.in \
	$(srcdir)/operf.1.in $(srcdir)/opgprof.1.in \
	$(srcdir)/ophelp.1.in $(srcdir)/opimport.1.in \
	$(srcdir)/opreport.1.in $(srcdir)/oprof_start.1.in \
	$(srcdir)/oprofile.1.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/binutils.m4 \
	$(top_srcdir)/m4/builtinexpect.m4 \
	$(top_srcdir)/m4/cellspubfdsupport.m4 \
	$(top_srcdir)/m4/compileroption.m4 \
	$(top_srcdir)/m4/copyifchange.m4 $(top_srcdir)/m4/docbook.m4 \
	$(top_srcdir)/m4/extradirs.m4 \
	$(top_srcdir)/m4/kernelversion.m4 $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/m4/mallocattribute.m4 \
	$(top_srcdir)/m4/poptconst.m4 \
	$(top_srcdir)/m4/precompiledheader.m4 $(top_srcdir)/m4/qt.m4 \
	$(top_srcdir)/m4/sstream.m4 $(top_srcdir)/m4/typedef.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = oprofile.1 opcontrol.1 ophelp.1 \
	op-check-perfevents.1 oprof_start.1 opreport.1 opannotate.1 \
	opgprof.1 oparchive.1 opimport.1 operf.1 ocount.1
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(htmldir)"
NROFF = nroff
MANS = $(man_MANS)
DATA = $(dist_html_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BFD_LIBS = @BFD_LIBS@
CAT_ENTRY_END = @CAT_ENTRY_END@
CAT_ENTRY_START = @CAT_ENTRY_START@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DATE = @DATE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DOCBOOK_ROOT = @DOCBOOK_ROOT@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXTRA_CFLAGS_MODULE = @EXTRA_CFLAGS_MODULE@
FGREP = @FGREP@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
JAVA_HOMEDIR = @JAVA_HOMEDIR@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBERTY_LIBS = @LIBERTY_LIBS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MOC = @MOC@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OP_CFLAGS = @OP_CFLAGS@
OP_CPPFLAGS = @OP_CPPFLAGS@
OP_CXXFLAGS = @OP_CXXFLAGS@
OP_DOCDIR = @OP_DOCDIR@
OP_LDFLAGS = @OP_LDFLAGS@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERF_EVENT_FLAGS = @PERF_EVENT_FLAGS@
PFM_LIB = @PFM_LIB@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
POPT_LIBS = @POPT_LIBS@
PTRDIFF_T_TYPE = @PTRDIFF_T_TYPE@
QT_CFLAGS = @QT_CFLAGS@
QT_INCLUDES = @QT_INCLUDES@
QT_LDFLAGS = @QT_LDFLAGS@
QT_LIB = @QT_LIB@
QT_LIBS = @QT_LIBS@
QT_VERSION = @QT_VERSION@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SIZE_T_TYPE = @SIZE_T_TYPE@
STRIP = @STRIP@
UIC = @UIC@
UIChelp = @UIChelp@
VERSION = @VERSION@
XMKMF = @XMKMF@
XML_CATALOG = @XML_CATALOG@
XSLTPROC = xsltproc
XSLTPROC_FLAGS = @XSLTPROC_FLAGS@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = $(prefix)/share/doc/oprofile
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
topdir = @topdir@
RM = rm
MANDIR = $(DESTDIR)@mandir@/man1
XHTML_STYLESHEET = $(srcdir)/xsl/xhtml.xsl
CHUNK_XHTML_STYLESHEET = $(srcdir)/xsl/xhtml-chunk.xsl
XML_CATALOG_FILES = xsl/catalog.xml
STYLESHEETS = $(CHUNK_XHTML_STYLESHEET) $(srcdir)/xsl/xhtml-common.xsl
man_MANS = oprofile.1 opcontrol.1 opreport.1 opannotate.1 opgprof.1 \
	ophelp.1 op-check-perfevents.1 oprof_start.1 oparchive.1 \
	opimport.1 $(am__append_1)
dist_html_DATA = oprofile.html internals.html opreport.xsd op-jit-devel.html
EXTRA_DIST = \
	oprofile.1 \
	oprofile.1.in \
	oprofile.xml \
	op-jit-devel.xml \
	internals.xml \
	buffers.png \
	xsl/catalog-1.xml.in \
	xsl/xhtml.xsl \
	xsl/xhtml-common.xsl \
	xsl/xhtml-chunk.xsl \
	srcdoc/Doxyfile.in \
	srcdoc/Makefile

all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
oprofile.1: $(top_builddir)/config.status $(srcdir)/oprofile.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
opcontrol.1: $(top_builddir)/config.status $(srcdir)/opcontrol.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
ophelp.1: $(top_builddir)/config.status $(srcdir)/ophelp.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
op-check-perfevents.1: $(top_builddir)/config.status $(srcdir)/op-check-perfevents.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
oprof_start.1: $(top_builddir)/config.status $(srcdir)/oprof_start.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
opreport.1: $(top_builddir)/config.status $(srcdir)/opreport.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
opannotate.1: $(top_builddir)/config.status $(srcdir)/opannotate.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
opgprof.1: $(top_builddir)/config.status $(srcdir)/opgprof.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
oparchive.1: $(top_builddir)/config.status $(srcdir)/oparchive.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
opimport.1: $(top_builddir)/config.status $(srcdir)/opimport.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
operf.1: $(top_builddir)/config.status $(srcdir)/operf.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
ocount.1: $(top_builddir)/config.status $(srcdir)/ocount.1.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-man1: $(man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(man_MANS)'; \
	test -n "$(man1dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.1[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-dist_htmlDATA: $(dist_html_DATA)
	@$(NORMAL_INSTALL)
	@list='$(dist_html_DATA)'; test -n "$(htmldir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done

uninstall-dist_htmlDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_html_DATA)'; test -n "$(htmldir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(htmldir)'; $(am__uninstall_files_from_dir)
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@list='$(MANS)'; if test -n "$$list"; then \
	  list=`for p in $$list; do \
	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
	  if test -n "$$list" && \
	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
	    exit 1; \
	  else :; fi; \
	else :; fi
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(MANS) $(DATA)
installdirs:
	for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(htmldir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-local

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-dist_htmlDATA install-man

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man: install-man1

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-dist_htmlDATA uninstall-local uninstall-man

uninstall-man: uninstall-man1

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	clean-local distclean distclean-generic distclean-libtool \
	distclean-local distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am \
	install-dist_htmlDATA install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-man1 install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-dist_htmlDATA uninstall-local uninstall-man \
	uninstall-man1


@have_xsltproc_TRUE@oprofile.html: ${top_srcdir}/doc/oprofile.xml
@have_xsltproc_TRUE@	XML_CATALOG_FILES=$(XML_CATALOG_FILES) $(XSLTPROC) $(XSLTPROC_FLAGS) -o $@ --stringparam version @VERSION@ $(XHTML_STYLESHEET) $<

@have_xsltproc_TRUE@op-jit-devel.html: ${top_srcdir}/doc/op-jit-devel.xml
@have_xsltproc_TRUE@	XML_CATALOG_FILES=$(XML_CATALOG_FILES) $(XSLTPROC) $(XSLTPROC_FLAGS) -o $@ --stringparam version @VERSION@ $(XHTML_STYLESHEET) $<

@have_xsltproc_TRUE@internals.html: ${top_srcdir}/doc/internals.xml
@have_xsltproc_TRUE@	XML_CATALOG_FILES=$(XML_CATALOG_FILES) $(XSLTPROC) $(XSLTPROC_FLAGS) -o $@ --stringparam version @VERSION@ $(XHTML_STYLESHEET) $<

# rules to generate oprofile.sf.net/doc files

@have_xsltproc_TRUE@doc/index.html: ${top_srcdir}/doc/oprofile.xml
@have_xsltproc_TRUE@	-mkdir doc/
@have_xsltproc_TRUE@	$(XSLTPROC) -o doc/ $(XSLTPROC_FLAGS) --stringparam version @VERSION@ $(CHUNK_XHTML_STYLESHEET) $<

@have_xsltproc_TRUE@doc/devel/index.html: ${top_srcdir}/doc/op-jit-devel.xml
@have_xsltproc_TRUE@	-mkdir doc/devel/
@have_xsltproc_TRUE@	$(XSLTPROC) -o doc/devel/ $(XSLTPROC_FLAGS) --stringparam version @VERSION@ $(CHUNK_XHTML_STYLESHEET) $<

@have_xsltproc_TRUE@doc/internals/index.html: ${top_srcdir}/doc/internals.xml
@have_xsltproc_TRUE@	-mkdir doc/internals/
@have_xsltproc_TRUE@	$(XSLTPROC) -o doc/internals/ $(XSLTPROC_FLAGS) --stringparam version @VERSION@ $(CHUNK_XHTML_STYLESHEET) $<

@have_xsltproc_TRUE@chunk: doc/index.html doc/internals/index.html doc/devel/index.html
@have_xsltproc_TRUE@	cp ${top_srcdir}/doc/buffers.png doc/internals/

@have_xsltproc_FALSE@oprofile.html:
@have_xsltproc_FALSE@	touch $@

@have_xsltproc_FALSE@internals.html:
@have_xsltproc_FALSE@	touch $@

@have_xsltproc_FALSE@op-jit-devel.html:
@have_xsltproc_FALSE@	touch $@

@have_xsltproc_FALSE@chunk:

distclean-local:
	$(RM) -f xsl/catalog-1.xml xsl/catalog.xml

clean-local:
	$(RM) -f $(generated_mans)

# these files are not cleaned by make uninstall automake bug ?
uninstall-local:
	rm -f @mandir@/cat1/oprofile.1.gz
	@for f in $(LINK_LIST); do		\
		rm -f $(CATDIR)/cat1/$$f.gz;	\
	done

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: