blob: 71a757877711f16efb68c2e387225b8a9c256914 [file] [log] [blame]
/*
* Copyright (c) 2012 Qualcomm Atheros, Inc..
* All Rights Reserved.
* Qualcomm Atheros Confidential and Proprietary.
*/
#ifndef _ATHDRV_LINUX_H
#define _ATHDRV_LINUX_H
#ifdef __cplusplus
extern "C" {
#endif
/*
* There are two types of ioctl's here: Standard ioctls and
* eXtended ioctls. All extended ioctls (XIOCTL) are multiplexed
* off of the single ioctl command, AR6000_IOCTL_EXTENDED. The
* arguments for every XIOCTL starts with a 32-bit command word
* that is used to select which extended ioctl is in use. After
* the command word are command-specific arguments.
*/
/* Linux standard Wireless Extensions, private ioctl interfaces */
#define IEEE80211_IOCTL_SETPARAM (SIOCIWFIRSTPRIV+0)
#define IEEE80211_IOCTL_SETKEY (SIOCIWFIRSTPRIV+1)
#define IEEE80211_IOCTL_DELKEY (SIOCIWFIRSTPRIV+2)
#define IEEE80211_IOCTL_SETMLME (SIOCIWFIRSTPRIV+3)
#define IEEE80211_IOCTL_ADDPMKID (SIOCIWFIRSTPRIV+4)
#define IEEE80211_IOCTL_SETOPTIE (SIOCIWFIRSTPRIV+5)
//#define IEEE80211_IOCTL_GETPARAM (SIOCIWFIRSTPRIV+6)
//#define IEEE80211_IOCTL_SETWMMPARAMS (SIOCIWFIRSTPRIV+7)
//#define IEEE80211_IOCTL_GETWMMPARAMS (SIOCIWFIRSTPRIV+8)
//#define IEEE80211_IOCTL_GETOPTIE (SIOCIWFIRSTPRIV+9)
//#define IEEE80211_IOCTL_SETAUTHALG (SIOCIWFIRSTPRIV+10)
#define IEEE80211_IOCTL_LASTONE (SIOCIWFIRSTPRIV+10)
/* ====WMI Ioctls==== */
/*
*
* Many ioctls simply provide WMI services to application code:
* an application makes such an ioctl call with a set of arguments
* that are packaged into the corresponding WMI message, and sent
* to the Target.
*/
#define AR6000_IOCTL_WMI_GETREV (SIOCIWFIRSTPRIV+11)
/*
* arguments:
* ar6000_version *revision
*/
#define AR6000_IOCTL_WMI_SETPWR (SIOCIWFIRSTPRIV+12)
/*
* arguments:
* WMI_POWER_MODE_CMD pwrModeCmd (see include/wmi.h)
* uses: WMI_SET_POWER_MODE_CMDID
*/
#define AR6000_IOCTL_WMI_SETSCAN (SIOCIWFIRSTPRIV+13)
/*
* arguments:
* WMI_SCAN_PARAMS_CMD scanParams (see include/wmi.h)
* uses: WMI_SET_SCAN_PARAMS_CMDID
*/
#define AR6000_IOCTL_WMI_SETLISTENINT (SIOCIWFIRSTPRIV+14)
/*
* arguments:
* UINT32 listenInterval
* uses: WMI_SET_LISTEN_INT_CMDID
*/
#define AR6000_IOCTL_WMI_SETBSSFILTER (SIOCIWFIRSTPRIV+15)
/*
* arguments:
* WMI_BSS_FILTER filter (see include/wmi.h)
* uses: WMI_SET_BSS_FILTER_CMDID
*/
#define AR6000_IOCTL_WMI_SET_CHANNELPARAMS (SIOCIWFIRSTPRIV+16)
/*
* arguments:
* WMI_CHANNEL_PARAMS_CMD chParams
* uses: WMI_SET_CHANNEL_PARAMS_CMDID
*/
#define AR6000_IOCTL_WMI_SET_PROBEDSSID (SIOCIWFIRSTPRIV+17)
/*
* arguments:
* WMI_PROBED_SSID_CMD probedSsids (see include/wmi.h)
* uses: WMI_SETPROBED_SSID_CMDID
*/
#define AR6000_IOCTL_WMI_SET_PMPARAMS (SIOCIWFIRSTPRIV+18)
/*
* arguments:
* WMI_POWER_PARAMS_CMD powerParams (see include/wmi.h)
* uses: WMI_SET_POWER_PARAMS_CMDID
*/
#define AR6000_IOCTL_WMI_SET_BADAP (SIOCIWFIRSTPRIV+19)
/*
* arguments:
* WMI_ADD_BAD_AP_CMD badAPs (see include/wmi.h)
* uses: WMI_ADD_BAD_AP_CMDID
*/
#define AR6000_IOCTL_WMI_GET_QOS_QUEUE (SIOCIWFIRSTPRIV+20)
/*
* arguments:
* ar6000_queuereq queueRequest (see below)
*/
#define AR6000_IOCTL_WMI_CREATE_QOS (SIOCIWFIRSTPRIV+21)
/*
* arguments:
* WMI_CREATE_PSTREAM createPstreamCmd (see include/wmi.h)
* uses: WMI_CREATE_PSTREAM_CMDID
*/
#define AR6000_IOCTL_WMI_DELETE_QOS (SIOCIWFIRSTPRIV+22)
/*
* arguments:
* WMI_DELETE_PSTREAM_CMD deletePstreamCmd (see include/wmi.h)
* uses: WMI_DELETE_PSTREAM_CMDID
*/
#define AR6000_IOCTL_WMI_SET_SNRTHRESHOLD (SIOCIWFIRSTPRIV+23)
/*
* arguments:
* WMI_SNR_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
* uses: WMI_SNR_THRESHOLD_PARAMS_CMDID
*/
#define AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK (SIOCIWFIRSTPRIV+24)
/*
* arguments:
* WMI_TARGET_ERROR_REPORT_BITMASK errorReportBitMask (see include/wmi.h)
* uses: WMI_TARGET_ERROR_REPORT_BITMASK_CMDID
*/
#define AR6000_IOCTL_WMI_GET_TARGET_STATS (SIOCIWFIRSTPRIV+25)
/*
* arguments:
* TARGET_STATS *targetStats (see below)
* uses: WMI_GET_STATISTICS_CMDID
*/
#define AR6000_IOCTL_WMI_SET_ASSOC_INFO (SIOCIWFIRSTPRIV+26)
/*
* arguments:
* WMI_SET_ASSOC_INFO_CMD setAssocInfoCmd
* uses: WMI_SET_ASSOC_INFO_CMDID
*/
#define AR6000_IOCTL_WMI_SET_ACCESS_PARAMS (SIOCIWFIRSTPRIV+27)
/*
* arguments:
* WMI_SET_ACCESS_PARAMS_CMD setAccessParams (see include/wmi.h)
* uses: WMI_SET_ACCESS_PARAMS_CMDID
*/
#define AR6000_IOCTL_WMI_SET_BMISS_TIME (SIOCIWFIRSTPRIV+28)
/*
* arguments:
* UINT32 beaconMissTime
* uses: WMI_SET_BMISS_TIME_CMDID
*/
#define AR6000_IOCTL_WMI_SET_DISC_TIMEOUT (SIOCIWFIRSTPRIV+29)
/*
* arguments:
* WMI_DISC_TIMEOUT_CMD disconnectTimeoutCmd (see include/wmi.h)
* uses: WMI_SET_DISC_TIMEOUT_CMDID
*/
#define AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS (SIOCIWFIRSTPRIV+30)
/*
* arguments:
* WMI_IBSS_PM_CAPS_CMD ibssPowerMgmtCapsCmd
* uses: WMI_SET_IBSS_PM_CAPS_CMDID
*/
/*
* There is a very small space available for driver-private
* wireless ioctls. In order to circumvent this limitation,
* we multiplex a bunch of ioctls (XIOCTLs) on top of a
* single AR6000_IOCTL_EXTENDED ioctl.
*/
#define AR6000_IOCTL_EXTENDED (SIOCIWFIRSTPRIV+31)
typedef enum {
AR6000_XIOCTL_BMI_DONE = 1,
AR6000_XIOCTL_BMI_READ_MEMORY,
AR6000_XIOCTL_BMI_WRITE_MEMORY,
AR6000_XIOCTL_BMI_EXECUTE,
AR6000_XIOCTL_BMI_SET_APP_START,
AR6000_XIOCTL_BMI_READ_SOC_REGISTER,
AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER,
AR6000_XIOCTL_BMI_TEST,
AR6000_XIOCTL_UNUSED9,
AR6000_XIOCTL_UNUSED10, /* 10 */
AR6000_XIOCTL_UNUSED11,
AR6000_XIOCTL_FORCE_TARGET_RESET,
AR6000_XIOCTL_HTC_RAW_OPEN,
AR6000_XIOCTL_HTC_RAW_CLOSE,
AR6000_XIOCTL_HTC_RAW_READ,
AR6000_XIOCTL_HTC_RAW_WRITE,
AR6000_XIOCTL_CHECK_TARGET_READY,
AR6000_XIOCTL_GPIO_OUTPUT_SET,
AR6000_XIOCTL_GPIO_INPUT_GET,
AR6000_XIOCTL_GPIO_REGISTER_SET, /* 20 */
AR6000_XIOCTL_GPIO_REGISTER_GET,
AR6000_XIOCTL_GPIO_INTR_ACK,
AR6000_XIOCTL_GPIO_INTR_WAIT,
AR6000_XIOCTL_SET_ADHOC_BSSID,
AR6000_XIOCTL_UNUSED25,
AR6000_XIOCTL_UNUSED26,
AR6000_XIOCTL_SET_BEACON_INTVAL,
IEEE80211_IOCTL_SETAUTHALG,
AR6000_XIOCTL_SET_VOICE_PKT_SIZE,
AR6000_XIOCTL_SET_MAX_SP, /* 30 */
AR6000_XIOCTL_WMI_GET_ROAM_TBL,
AR6000_XIOCTL_WMI_SET_ROAM_CTRL,
AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS,
AR6000_XIOCTRL_WMI_GET_POWER_MODE,
AR6000_XIOCTRL_WMI_SET_WLAN_STATE,
AR6000_XIOCTL_WMI_GET_ROAM_DATA,
AR6000_XIOCTL_WMI_SETRETRYLIMITS,
AR6000_XIOCTL_TCMD_CONT_TX,
AR6000_XIOCTL_TCMD_CONT_RX,
AR6000_XIOCTL_TCMD_PM, /* 40 */
AR6000_XIOCTL_WMI_STARTSCAN,
AR6000_XIOCTL_WMI_SETFIXRATES,
AR6000_XIOCTL_WMI_GETFIXRATES,
AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD,
AR6000_XIOCTL_WMI_CLR_RSSISNR,
AR6000_XIOCTL_WMI_SET_LQTHRESHOLD,
AR6000_XIOCTL_WMI_SET_RTS,
AR6000_XIOCTL_WMI_SET_LPREAMBLE,
AR6000_XIOCTL_WMI_SET_AUTHMODE,
AR6000_XIOCTL_WMI_SET_REASSOCMODE, /* 50 */
AR6000_XIOCTL_WMI_SET_WMM,
AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS,
AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP,
AR6000_XIOCTL_WMI_GET_RD,
AR6000_XIOCTL_DIAG_READ,
AR6000_XIOCTL_DIAG_WRITE,
AR6000_XIOCTL_WMI_SET_TXOP,
AR6000_XIOCTL_USER_SETKEYS,
AR6000_XIOCTL_WMI_SET_KEEPALIVE,
AR6000_XIOCTL_WMI_GET_KEEPALIVE, /* 60 */
AR6000_XIOCTL_BMI_ROMPATCH_INSTALL,
AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL,
AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE,
AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE,
AR6000_XIOCTL_WMI_SET_APPIE,
AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER,
AR6000_XIOCTL_DBGLOG_CFG_MODULE,
AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS,
AR6000_XIOCTL_WMI_SET_WSC_STATUS = 70, /* 70 */
AR6000_XIOCTL_WMI_SET_BT_STATUS,
AR6000_XIOCTL_WMI_SET_BT_PARAMS,
AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE,
AR6000_XIOCTL_WMI_SET_WOW_MODE,
AR6000_XIOCTL_WMI_GET_WOW_LIST,
AR6000_XIOCTL_WMI_ADD_WOW_PATTERN,
AR6000_XIOCTL_WMI_DEL_WOW_PATTERN,
AR6000_XIOCTL_TARGET_INFO,
AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE,
AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE, /* 80 */
AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS,
AR6000_XIOCTL_WMI_SET_AKMP_PARAMS,
AR6000_XIOCTL_WMI_GET_PMKID_LIST,
AR6000_XIOCTL_WMI_SET_PMKID_LIST,
AR6000_XIOCTL_WMI_SET_PARAMS,
AR6000_XIOCTL_WMI_SET_MCAST_FILTER,
AR6000_XIOCTL_WMI_DEL_MCAST_FILTER,
AR6000_XIOCTL_UNUSED90 = 90, /* 90 */
AR6000_XIOCTL_BMI_LZ_STREAM_START,
AR6000_XIOCTL_BMI_LZ_DATA,
AR6000_XIOCTL_PROF_CFG,
AR6000_XIOCTL_PROF_ADDR_SET,
AR6000_XIOCTL_PROF_START,
AR6000_XIOCTL_PROF_STOP,
AR6000_XIOCTL_PROF_COUNT_GET,
AR6000_XIOCTL_WMI_ABORT_SCAN,
AR6000_XIOCTL_AP_GET_STA_LIST,
AR6000_XIOCTL_AP_HIDDEN_SSID, /* 100 */
AR6000_XIOCTL_AP_SET_NUM_STA,
AR6000_XIOCTL_AP_SET_ACL_MAC,
AR6000_XIOCTL_AP_GET_ACL_LIST,
AR6000_XIOCTL_AP_COMMIT_CONFIG,
IEEE80211_IOCTL_GETWPAIE,
AR6000_XIOCTL_AP_CONN_INACT_TIME,
AR6000_XIOCTL_AP_PROT_SCAN_TIME,
AR6000_XIOCTL_AP_SET_COUNTRY,
AR6000_XIOCTL_AP_SET_DTIM,
AR6000_XIOCTL_WMI_TARGET_EVENT_REPORT, /* 110 */
AR6000_XIOCTL_SET_IP,
AR6000_XIOCTL_AP_SET_ACL_POLICY,
AR6000_XIOCTL_AP_CTRL_BSS_COMM,
AR6000_XIOCTL_DUMP_MODULE_DEBUG_INFO,
AR6000_XIOCTL_MODULE_DEBUG_SET_MASK,
AR6000_XIOCTL_MODULE_DEBUG_GET_MASK,
AR6000_XIOCTL_DUMP_RCV_AGGR_STATS,
AR6000_XIOCTL_SET_HT_CAP,
AR6000_XIOCTL_SET_HT_OP,
AR6000_XIOCTL_AP_GET_STAT, /* 120 */
AR6000_XIOCTL_SET_TX_SELECT_RATES,
AR6000_XIOCTL_SETUP_AGGR,
AR6000_XIOCTL_ALLOW_AGGR,
AR6000_XIOCTL_AP_GET_HIDDEN_SSID,
AR6000_XIOCTL_AP_GET_COUNTRY,
AR6000_XIOCTL_AP_GET_WMODE,
AR6000_XIOCTL_AP_GET_DTIM,
AR6000_XIOCTL_AP_GET_BINTVL,
AR6000_XIOCTL_AP_GET_RTS,
AR6000_XIOCTL_DELE_AGGR, /* 130 */
AR6000_XIOCTL_FETCH_TARGET_REGS,
AR6000_XIOCTL_HCI_CMD,
AR6000_XIOCTL_ACL_DATA,
AR6000_XIOCTL_WLAN_CONN_PRECEDENCE,
AR6000_XIOCTL_AP_SET_11BG_RATESET,
AR6000_XIOCTL_WMI_SET_AP_PS,
AR6000_XIOCTL_WMI_MCAST_FILTER,
AR6000_XIOCTL_WMI_SET_BTCOEX_FE_ANT,
AR6000_XIOCTL_WMI_SET_BTCOEX_COLOCATED_BT_DEV,
AR6000_XIOCTL_WMI_SET_BTCOEX_BTINQUIRY_PAGE_CONFIG, /* 140 */
AR6000_XIOCTL_WMI_SET_BTCOEX_SCO_CONFIG,
AR6000_XIOCTL_WMI_SET_BTCOEX_A2DP_CONFIG,
AR6000_XIOCTL_WMI_SET_BTCOEX_ACLCOEX_CONFIG,
AR6000_XIOCTL_WMI_SET_BTCOEX_DEBUG,
AR6000_XIOCTL_WMI_SET_BT_OPERATING_STATUS,
AR6000_XIOCTL_WMI_GET_BTCOEX_CONFIG,
AR6000_XIOCTL_WMI_GET_BTCOEX_STATS,
AR6000_XIOCTL_WMI_SET_QOS_SUPP,
AR6000_XIOCTL_AP_SET_DFS,
AR6000_XIOCTL_WMI_P2P_DISCOVER, /* 150 */
AR6000_XIOCTL_WMI_P2P_STOP_FIND,
AR6000_XIOCTL_WMI_P2P_CANCEL,
AR6000_XIOCTL_WMI_P2P_LISTEN,
AR6000_XIOCTL_WMI_P2P_GO_NEG,
AR6000_XIOCTL_WMI_P2P_AUTH_GO_NEG,
AR6000_XIOCTL_WMI_P2P_REJECT,
AR6000_XIOCTL_WMI_P2P_CONFIG,
AR6000_XIOCTL_WMI_WPS_CONFIG,
AR6000_XIOCTL_WMI_P2P_FINDNODE,
AR6000_XIOCTL_WMI_P2P_GRP_INIT, /* 160 */
AR6000_XIOCTL_WMI_P2P_GRP_FORMATION_DONE,
AR6000_XIOCTL_WMI_P2P_INVITE,
AR6000_XIOCTL_WMI_P2P_PROV_DISC,
AR6000_XIOCTL_WMI_P2P_SET,
AR6000_XIOCTL_WMI_P2P_PEER,
AR6000_XIOCTL_WMI_P2P_FLUSH,
AR6000_XIOCTL_WMI_GET_GO_PARAMS,
AR6000_XIOCTL_P2P_AUTH_INVITE,
AR6000_XIOCTL_WMI_P2P_GET_IF_ADDR,
AR6000_XIOCTL_WMI_P2P_GET_DEV_ADDR, /* 170 */
AR6000_XIOCTL_WMI_P2P_SDPD_TX_CMD,
AR6000_XIOTCL_WMI_P2P_SD_CANCEL_REQUEST,
AR6000_XIOCTL_SET_BT_HW_POWER_STATE,
AR6000_XIOCTL_GET_BT_HW_POWER_STATE,
AR6000_XIOCTL_GET_WLAN_SLEEP_STATE,
AR6000_XIOCTL_WMI_SET_TX_SGI_PARAM,
AR6000_XIOCTL_WMI_ENABLE_WAC_PARAM,
AR6000_XIOCTL_WAC_SCAN_REPLY,
AR6000_XIOCTL_WMI_WAC_CTRL_REQ,
AR6000_XIOCTL_WMI_SET_WPA_OFFLOAD_STATE, /* 180 */
AR6000_XIOCTL_WMI_SET_PASSPHRASE,
AR6000_XIOCTL_BMI_NVRAM_PROCESS,
AR6000_XIOCTL_WMI_SET_DIVERSITY_PARAM,
AR6000_XIOCTL_WMI_FORCE_ASSERT,
AR6000_XIOCTL_WMI_ENABLE_PKTLOG,
AR6000_XIOCTL_WMI_DISABLE_PKTLOG,
AR6000_XIOCTL_WMI_GET_PKTLOG,
AR6000_XIOCTL_AP_ACS_DISABLE_HI_CHANNELS,
AR6000_XIOCTL_TCMD_CMDS,
AR6000_XIOCTL_WMI_SET_EXCESS_TX_RETRY_THRES, /* 190 */
AR6000_XIOCTL_AP_GET_NUM_STA,
AR6000_XIOCTL_SUSPEND_DRIVER,
AR6000_XIOCTL_RESUME_DRIVER,
AR6000_XIOCTL_GET_SUBMODE,
AR6000_XIOCTL_WMI_AP_SET_APSD,
AR6000_XIOCTL_TCMD_SETREG,
AR6000_XIOCTL_GET_HT_CAP,
AR6000_XIOCTL_WMI_GET_P2P_IE, /* 198 */
AR6000_XIOCTL_WMI_P2P_GET_OWN_INFO,
} XTND_IOCLTS;
///* ====BMI Extended Ioctls==== */
//
//#define AR6000_XIOCTL_BMI_DONE 1
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_BMI_DONE)
// * uses: BMI_DONE
// */
//
//#define AR6000_XIOCTL_BMI_READ_MEMORY 2
///*
// * arguments:
// * union {
// * struct {
// * UINT32 cmd (AR6000_XIOCTL_BMI_READ_MEMORY)
// * UINT32 address
// * UINT32 length
// * }
// * char results[length]
// * }
// * uses: BMI_READ_MEMORY
// */
//
//#define AR6000_XIOCTL_BMI_WRITE_MEMORY 3
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_MEMORY)
// * UINT32 address
// * UINT32 length
// * char data[length]
// * uses: BMI_WRITE_MEMORY
// */
//
//#define AR6000_XIOCTL_BMI_EXECUTE 4
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_BMI_EXECUTE)
// * UINT32 TargetAddress
// * UINT32 parameter
// * uses: BMI_EXECUTE
// */
//
//#define AR6000_XIOCTL_BMI_SET_APP_START 5
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_BMI_SET_APP_START)
// * UINT32 TargetAddress
// * uses: BMI_SET_APP_START
// */
//
//#define AR6000_XIOCTL_BMI_READ_SOC_REGISTER 6
///*
// * arguments:
// * union {
// * struct {
// * UINT32 cmd (AR6000_XIOCTL_BMI_READ_SOC_REGISTER)
// * UINT32 TargetAddress, 32-bit aligned
// * }
// * UINT32 result
// * }
// * uses: BMI_READ_SOC_REGISTER
// */
//
//#define AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER 7
///*
// * arguments:
// * struct {
// * UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER)
// * UINT32 TargetAddress, 32-bit aligned
// * UINT32 newValue
// * }
// * uses: BMI_WRITE_SOC_REGISTER
// */
//
//#define AR6000_XIOCTL_BMI_TEST 8
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_BMI_TEST)
// * UINT32 address
// * UINT32 length
// * UINT32 count
// */
//
//
//
///* Historical Host-side DataSet support */
//#define AR6000_XIOCTL_UNUSED9 9
//#define AR6000_XIOCTL_UNUSED10 10
//#define AR6000_XIOCTL_UNUSED11 11
//
///* ====Misc Extended Ioctls==== */
//
//#define AR6000_XIOCTL_FORCE_TARGET_RESET 12
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_FORCE_TARGET_RESET)
// */
//
//
//#ifdef HTC_RAW_INTERFACE
///* HTC Raw Interface Ioctls */
//#define AR6000_XIOCTL_HTC_RAW_OPEN 13
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_OPEN)
// */
//
//#define AR6000_XIOCTL_HTC_RAW_CLOSE 14
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_CLOSE)
// */
//
//#define AR6000_XIOCTL_HTC_RAW_READ 15
///*
// * arguments:
// * union {
// * struct {
// * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_READ)
// * UINT32 mailboxID
// * UINT32 length
// * }
// * results[length]
// * }
// */
//
//#define AR6000_XIOCTL_HTC_RAW_WRITE 16
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_WRITE)
// * UINT32 mailboxID
// * UINT32 length
// * char buffer[length]
// */
//#endif /* HTC_RAW_INTERFACE */
//
//#define AR6000_XIOCTL_CHECK_TARGET_READY 17
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_CHECK_TARGET_READY)
// */
//
//
//
///* ====GPIO (General Purpose I/O) Extended Ioctls==== */
//
//#define AR6000_XIOCTL_GPIO_OUTPUT_SET 18
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_GPIO_OUTPUT_SET)
// * ar6000_gpio_output_set_cmd_s (see below)
// * uses: WMIX_GPIO_OUTPUT_SET_CMDID
// */
//
//#define AR6000_XIOCTL_GPIO_INPUT_GET 19
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_GPIO_INPUT_GET)
// * uses: WMIX_GPIO_INPUT_GET_CMDID
// */
//
//#define AR6000_XIOCTL_GPIO_REGISTER_SET 20
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_SET)
// * ar6000_gpio_register_cmd_s (see below)
// * uses: WMIX_GPIO_REGISTER_SET_CMDID
// */
//
//#define AR6000_XIOCTL_GPIO_REGISTER_GET 21
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_GET)
// * ar6000_gpio_register_cmd_s (see below)
// * uses: WMIX_GPIO_REGISTER_GET_CMDID
// */
//
//#define AR6000_XIOCTL_GPIO_INTR_ACK 22
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_ACK)
// * ar6000_cpio_intr_ack_cmd_s (see below)
// * uses: WMIX_GPIO_INTR_ACK_CMDID
// */
//
//#define AR6000_XIOCTL_GPIO_INTR_WAIT 23
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_WAIT)
// */
//
//
//
///* ====more wireless commands==== */
//
//#define AR6000_XIOCTL_SET_ADHOC_BSSID 24
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BSSID)
// * WMI_SET_ADHOC_BSSID_CMD setAdHocBssidCmd (see include/wmi.h)
// */
//
//#define AR6000_XIOCTL_SET_OPT_MODE 25
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_SET_OPT_MODE)
// * WMI_SET_OPT_MODE_CMD setOptModeCmd (see include/wmi.h)
// * uses: WMI_SET_OPT_MODE_CMDID
// */
//
//#define AR6000_XIOCTL_OPT_SEND_FRAME 26
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_OPT_SEND_FRAME)
// * WMI_OPT_TX_FRAME_CMD optTxFrameCmd (see include/wmi.h)
// * uses: WMI_OPT_TX_FRAME_CMDID
// */
//
//#define AR6000_XIOCTL_SET_BEACON_INTVAL 27
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_SET_BEACON_INTVAL)
// * WMI_BEACON_INT_CMD beaconIntCmd (see include/wmi.h)
// * uses: WMI_SET_BEACON_INT_CMDID
// */
//
//
//#define IEEE80211_IOCTL_SETAUTHALG 28
//
//
//#define AR6000_XIOCTL_SET_VOICE_PKT_SIZE 29
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_SET_VOICE_PKT_SIZE)
// * WMI_SET_VOICE_PKT_SIZE_CMD setVoicePktSizeCmd (see include/wmi.h)
// * uses: WMI_SET_VOICE_PKT_SIZE_CMDID
// */
//
//
//#define AR6000_XIOCTL_SET_MAX_SP 30
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_SET_MAX_SP)
// * WMI_SET_MAX_SP_LEN_CMD maxSPLen(see include/wmi.h)
// * uses: WMI_SET_MAX_SP_LEN_CMDID
// */
//
//#define AR6000_XIOCTL_WMI_GET_ROAM_TBL 31
//
//#define AR6000_XIOCTL_WMI_SET_ROAM_CTRL 32
//
//#define AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS 33
//
//
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS)
// * WMI_SET_POWERSAVE_TIMERS_CMD powerSaveTimers(see include/wmi.h)
// * WMI_SET_POWERSAVE_TIMERS_CMDID
// */
//
//#define AR6000_XIOCTRL_WMI_GET_POWER_MODE 34
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTRL_WMI_GET_POWER_MODE)
// */
//
//#define AR6000_XIOCTRL_WMI_SET_WLAN_STATE 35
typedef enum {
WLAN_DISABLED,
WLAN_ENABLED
} AR6000_WLAN_STATE;
///*
// * arguments:
// * enable/disable
// */
//
//#define AR6000_XIOCTL_WMI_GET_ROAM_DATA 36
//
//#define AR6000_XIOCTL_WMI_SETRETRYLIMITS 37
///*
// * arguments:
// * WMI_SET_RETRY_LIMITS_CMD ibssSetRetryLimitsCmd
// * uses: WMI_SET_RETRY_LIMITS_CMDID
// */
//
//#ifdef CONFIG_HOST_TCMD_SUPPORT
///* ====extended commands for radio test ==== */
//
//#define AR6000_XIOCTL_TCMD_CONT_TX 38
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_TX)
// * WMI_TCMD_CONT_TX_CMD contTxCmd (see include/wmi.h)
// * uses: WMI_TCMD_CONT_TX_CMDID
// */
//
//#define AR6000_XIOCTL_TCMD_CONT_RX 39
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_RX)
// * WMI_TCMD_CONT_RX_CMD rxCmd (see include/wmi.h)
// * uses: WMI_TCMD_CONT_RX_CMDID
// */
//
//#define AR6000_XIOCTL_TCMD_PM 40
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_TCMD_PM)
// * WMI_TCMD_PM_CMD pmCmd (see include/wmi.h)
// * uses: WMI_TCMD_PM_CMDID
// */
//
//#endif /* CONFIG_HOST_TCMD_SUPPORT */
//
//#define AR6000_XIOCTL_WMI_STARTSCAN 41
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_WMI_STARTSCAN)
// * UINT8 scanType
// * UINT8 scanConnected
// * A_BOOL forceFgScan
// * uses: WMI_START_SCAN_CMDID
// */
//
//#define AR6000_XIOCTL_WMI_SETFIXRATES 42
//
//#define AR6000_XIOCTL_WMI_GETFIXRATES 43
//
//
//#define AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD 44
///*
// * arguments:
// * WMI_RSSI_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
// * uses: WMI_RSSI_THRESHOLD_PARAMS_CMDID
// */
//
//#define AR6000_XIOCTL_WMI_CLR_RSSISNR 45
///*
// * arguments:
// * WMI_CLR_RSSISNR_CMD thresholdParams (see include/wmi.h)
// * uses: WMI_CLR_RSSISNR_CMDID
// */
//
//#define AR6000_XIOCTL_WMI_SET_LQTHRESHOLD 46
///*
// * arguments:
// * WMI_LQ_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
// * uses: WMI_LQ_THRESHOLD_PARAMS_CMDID
// */
//
//#define AR6000_XIOCTL_WMI_SET_RTS 47
///*
// * arguments:
// * WMI_SET_RTS_MODE_CMD (see include/wmi.h)
// * uses: WMI_SET_RTS_MODE_CMDID
// */
//
//#define AR6000_XIOCTL_WMI_SET_LPREAMBLE 48
//
//#define AR6000_XIOCTL_WMI_SET_AUTHMODE 49
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_WMI_SET_AUTHMODE)
// * UINT8 mode
// * uses: WMI_SET_RECONNECT_AUTH_MODE_CMDID
// */
//
//#define AR6000_XIOCTL_WMI_SET_REASSOCMODE 50
//
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_WMI_SET_WMM)
// * UINT8 mode
// * uses: WMI_SET_WMM_CMDID
// */
//#define AR6000_XIOCTL_WMI_SET_WMM 51
//
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS)
// * UINT32 frequency
// * UINT8 threshold
// */
//#define AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS 52
//
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP)
// * UINT32 cookie
// */
//#define AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP 53
//
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_WMI_GET_RD)
// * UINT32 regDomain
// */
//#define AR6000_XIOCTL_WMI_GET_RD 54
//
//#define AR6000_XIOCTL_DIAG_READ 55
//
//#define AR6000_XIOCTL_DIAG_WRITE 56
//
///*
// * arguments cmd (AR6000_XIOCTL_SET_TXOP)
// * WMI_TXOP_CFG txopEnable
// */
//#define AR6000_XIOCTL_WMI_SET_TXOP 57
//
//#ifdef USER_KEYS
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_USER_SETKEYS)
// * UINT32 keyOpCtrl
// * uses AR6000_USER_SETKEYS_INFO
// */
//#define AR6000_XIOCTL_USER_SETKEYS 58
//#endif /* USER_KEYS */
//
//#define AR6000_XIOCTL_WMI_SET_KEEPALIVE 59
///*
// * arguments:
// * UINT8 cmd (AR6000_XIOCTL_WMI_SET_KEEPALIVE)
// * UINT8 keepaliveInterval
// * uses: WMI_SET_KEEPALIVE_CMDID
// */
//
//#define AR6000_XIOCTL_WMI_GET_KEEPALIVE 60
///*
// * arguments:
// * UINT8 cmd (AR6000_XIOCTL_WMI_GET_KEEPALIVE)
// * UINT8 keepaliveInterval
// * A_BOOL configured
// * uses: WMI_GET_KEEPALIVE_CMDID
// */
//
///* ====ROM Patching Extended Ioctls==== */
//
//#define AR6000_XIOCTL_BMI_ROMPATCH_INSTALL 61
///*
// * arguments:
// * union {
// * struct {
// * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_INSTALL)
// * UINT32 ROM Address
// * UINT32 RAM Address
// * UINT32 number of bytes
// * UINT32 activate? (0 or 1)
// * }
// * A_UINT32 resulting rompatch ID
// * }
// * uses: BMI_ROMPATCH_INSTALL
// */
//
//#define AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL 62
///*
// * arguments:
// * struct {
// * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL)
// * UINT32 rompatch ID
// * }
// * uses: BMI_ROMPATCH_UNINSTALL
// */
//
//#define AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE 63
///*
// * arguments:
// * struct {
// * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE)
// * UINT32 rompatch count
// * UINT32 rompatch IDs[rompatch count]
// * }
// * uses: BMI_ROMPATCH_ACTIVATE
// */
//
//#define AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE 64
///*
// * arguments:
// * struct {
// * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE)
// * UINT32 rompatch count
// * UINT32 rompatch IDs[rompatch count]
// * }
// * uses: BMI_ROMPATCH_DEACTIVATE
// */
//
//#define AR6000_XIOCTL_WMI_SET_APPIE 65
///*
// * arguments:
// * struct {
// * UINT32 cmd (AR6000_XIOCTL_WMI_SET_APPIE)
// * UINT32 app_frmtype;
// * UINT32 app_buflen;
// * UINT8 app_buf[];
// * }
// */
//#define AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER 66
///*
// * arguments:
// * A_UINT32 filter_type;
// */
//
//#define AR6000_XIOCTL_DBGLOG_CFG_MODULE 67
//
//#define AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS 68
//
//#define AR6000_XIOCTL_WMI_SET_WSC_STATUS 70
///*
// * arguments:
// * A_UINT32 wsc_status;
// * (WSC_REG_INACTIVE or WSC_REG_ACTIVE)
// */
//
///*
// * arguments:
// * struct {
// * A_UINT8 streamType;
// * A_UINT8 status;
// * }
// * uses: WMI_SET_BT_STATUS_CMDID
// */
//#define AR6000_XIOCTL_WMI_SET_BT_STATUS 71
//
///*
// * arguments:
// * struct {
// * A_UINT8 paramType;
// * union {
// * A_UINT8 noSCOPkts;
// * BT_PARAMS_A2DP a2dpParams;
// * BT_COEX_REGS regs;
// * };
// * }
// * uses: WMI_SET_BT_PARAM_CMDID
// */
//#define AR6000_XIOCTL_WMI_SET_BT_PARAMS 72
//
//#define AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE 73
//#define AR6000_XIOCTL_WMI_SET_WOW_MODE 74
//#define AR6000_XIOCTL_WMI_GET_WOW_LIST 75
//#define AR6000_XIOCTL_WMI_ADD_WOW_PATTERN 76
//#define AR6000_XIOCTL_WMI_DEL_WOW_PATTERN 77
//
//
//
//#define AR6000_XIOCTL_TARGET_INFO 78
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_TARGET_INFO)
// * A_UINT32 TargetVersion (returned)
// * A_UINT32 TargetType (returned)
// * (See also bmi_msg.h target_ver and target_type)
// */
//
//#define AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE 79
///*
// * arguments:
// * none
// */
//
//#define AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE 80
///*
// * This ioctl is used to emulate traffic activity
// * timeouts. Activity/inactivity will trigger the driver
// * to re-balance credits.
// *
// * arguments:
// * ar6000_traffic_activity_change
// */
//
//#define AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS 81
///*
// * This ioctl is used to set the connect control flags
// *
// * arguments:
// * A_UINT32 connectCtrlFlags
// */
//
//#define AR6000_XIOCTL_WMI_SET_AKMP_PARAMS 82
///*
// * This IOCTL sets any Authentication,Key Management and Protection
// * related parameters. This is used along with the information set in
// * Connect Command.
// * Currently this enables Multiple PMKIDs to an AP.
// *
// * arguments:
// * struct {
// * A_UINT32 akmpInfo;
// * }
// * uses: WMI_SET_AKMP_PARAMS_CMD
// */
//
//#define AR6000_XIOCTL_WMI_GET_PMKID_LIST 83
//
//#define AR6000_XIOCTL_WMI_SET_PMKID_LIST 84
///*
// * This IOCTL is used to set a list of PMKIDs. This list of
// * PMKIDs is used in the [Re]AssocReq Frame. This list is used
// * only if the MultiPMKID option is enabled via the
// * AR6000_XIOCTL_WMI_SET_AKMP_PARAMS IOCTL.
// *
// * arguments:
// * struct {
// * A_UINT32 numPMKID;
// * WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE];
// * }
// * uses: WMI_SET_PMKIDLIST_CMD
// */
//
//#define AR6000_XIOCTL_WMI_SET_PARAMS 85
//#define AR6000_XIOCTL_WMI_SET_MCAST_FILTER 86
//#define AR6000_XIOCTL_WMI_DEL_MCAST_FILTER 87
//
//
///* Historical DSETPATCH support for INI patches */
//#define AR6000_XIOCTL_UNUSED90 90
//
//
///* Support LZ-compressed firmware download */
//#define AR6000_XIOCTL_BMI_LZ_STREAM_START 91
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_BMI_LZ_STREAM_START)
// * UINT32 address
// * uses: BMI_LZ_STREAM_START
// */
//
//#define AR6000_XIOCTL_BMI_LZ_DATA 92
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_BMI_LZ_DATA)
// * UINT32 length
// * char data[length]
// * uses: BMI_LZ_DATA
// */
//
//#define AR6000_XIOCTL_PROF_CFG 93
///*
// * arguments:
// * A_UINT32 period
// * A_UINT32 nbins
// */
//
//#define AR6000_XIOCTL_PROF_ADDR_SET 94
///*
// * arguments:
// * A_UINT32 Target address
// */
//
//#define AR6000_XIOCTL_PROF_START 95
//
//#define AR6000_XIOCTL_PROF_STOP 96
//
//#define AR6000_XIOCTL_PROF_COUNT_GET 97
//
//#define AR6000_XIOCTL_WMI_ABORT_SCAN 98
//
///*
// * AP mode
// */
//#define AR6000_XIOCTL_AP_GET_STA_LIST 99
//
//#define AR6000_XIOCTL_AP_HIDDEN_SSID 100
//
//#define AR6000_XIOCTL_AP_SET_NUM_STA 101
//
//#define AR6000_XIOCTL_AP_SET_ACL_MAC 102
//
//#define AR6000_XIOCTL_AP_GET_ACL_LIST 103
//
//#define AR6000_XIOCTL_AP_COMMIT_CONFIG 104
//
//#define IEEE80211_IOCTL_GETWPAIE 105
//
//#define AR6000_XIOCTL_AP_CONN_INACT_TIME 106
//
//#define AR6000_XIOCTL_AP_PROT_SCAN_TIME 107
//
//#define AR6000_XIOCTL_AP_SET_COUNTRY 108
//
//#define AR6000_XIOCTL_AP_SET_DTIM 109
//
//
//
//
//#define AR6000_XIOCTL_WMI_TARGET_EVENT_REPORT 110
//
//#define AR6000_XIOCTL_SET_IP 111
//
//#define AR6000_XIOCTL_AP_SET_ACL_POLICY 112
//
//#define AR6000_XIOCTL_AP_CTRL_BSS_COMM 113
//
//#define AR6000_XIOCTL_DUMP_MODULE_DEBUG_INFO 114
//
//#define AR6000_XIOCTL_MODULE_DEBUG_SET_MASK 115
//
//#define AR6000_XIOCTL_MODULE_DEBUG_GET_MASK 116
//
//#define AR6000_XIOCTL_DUMP_RCV_AGGR_STATS 117
//
//#define AR6000_XIOCTL_SET_HT_CAP 118
//
//#define AR6000_XIOCTL_SET_HT_OP 119
//
//#define AR6000_XIOCTL_AP_GET_STAT 120
//
//#define AR6000_XIOCTL_SET_TX_SELECT_RATES 121
//
//#define AR6000_XIOCTL_SETUP_AGGR 122
//
//#define AR6000_XIOCTL_ALLOW_AGGR 123
//
//#define AR6000_XIOCTL_AP_GET_HIDDEN_SSID 124
//
//#define AR6000_XIOCTL_AP_GET_COUNTRY 125
//
//#define AR6000_XIOCTL_AP_GET_WMODE 126
//
//#define AR6000_XIOCTL_AP_GET_DTIM 127
//
//#define AR6000_XIOCTL_AP_GET_BINTVL 128
//
//#define AR6000_XIOCTL_AP_GET_RTS 129
//
//#define AR6000_XIOCTL_DELE_AGGR 130
//
//#define AR6000_XIOCTL_FETCH_TARGET_REGS 131
//
//#define AR6000_XIOCTL_HCI_CMD 132
//
//#define AR6000_XIOCTL_ACL_DATA 133
//
//#define AR6000_XIOCTL_WLAN_CONN_PRECEDENCE 134
//
//#define AR6000_XIOCTL_AP_SET_11BG_RATESET 135
//
//#define AR6000_XIOCTL_WMI_SET_AP_PS 136
//
//#define AR6000_XIOCTL_WMI_MCAST_FILTER 137
//
//#define AR6000_XIOCTL_WMI_SET_BTCOEX_FE_ANT 138
//
//#define AR6000_XIOCTL_WMI_SET_BTCOEX_COLOCATED_BT_DEV 139
//
//#define AR6000_XIOCTL_WMI_SET_BTCOEX_BTINQUIRY_PAGE_CONFIG 140
//
//#define AR6000_XIOCTL_WMI_SET_BTCOEX_SCO_CONFIG 141
//
//#define AR6000_XIOCTL_WMI_SET_BTCOEX_A2DP_CONFIG 142
//
//#define AR6000_XIOCTL_WMI_SET_BTCOEX_ACLCOEX_CONFIG 143
//
//#define AR6000_XIOCTL_WMI_SET_BTCOEX_DEBUG 144
//
//#define AR6000_XIOCTL_WMI_SET_BT_OPERATING_STATUS 145
//
//#define AR6000_XIOCTL_WMI_GET_BTCOEX_CONFIG 146
//
//#define AR6000_XIOCTL_WMI_GET_BTCOEX_STATS 147
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_WMI_SET_QOS_SUPP)
// * UINT8 mode
// * uses: WMI_SET_QOS_SUPP_CMDID
// */
//#define AR6000_XIOCTL_WMI_SET_QOS_SUPP 148
//
//#define AR6000_XIOCTL_AP_SET_DFS 149
//
//#ifdef P2P
//#define AR6000_XIOCTL_WMI_P2P_DISCOVER 150
//#define AR6000_XIOCTL_WMI_P2P_LISTEN 151
//#define AR6000_XIOCTL_WMI_P2P_GO_NEG 152
//#define AR6000_XIOCTL_WMI_P2P_CONFIG 153
//#define AR6000_XIOCTL_WMI_WPS_CONFIG 154
//#define AR6000_XIOCTL_WMI_P2P_FINDNODE 155
//#endif
//#define AR6000_XIOCTL_SET_BT_HW_POWER_STATE 156
//#define AR6000_XIOCTL_GET_BT_HW_POWER_STATE 157
//#define AR6000_XIOCTL_GET_WLAN_SLEEP_STATE 158
//#define AR6000_XIOCTL_WMI_SET_TX_SGI_PARAM 159
///*
// * arguments:
// * WMI_AP_PS_CMD apPsCmd
// * uses: WMI_AP_PS_CMDID
// */
//
//
//// WAC
//#define AR6000_XIOCTL_WMI_ENABLE_WAC_PARAM 160
//
//#define AR6000_XIOCTL_WAC_SCAN_REPLY 161
//
//#define AR6000_XIOCTL_WMI_WAC_CTRL_REQ 162
//
//#define AR6000_XIOCTL_WMI_SET_WPA_OFFLOAD_STATE 163
//
//#define AR6000_XIOCTL_WMI_SET_PASSPHRASE 164
//
//#define AR6000_XIOCTL_BMI_NVRAM_PROCESS 165
//
//#define AR6000_XIOCTL_AP_ACS_DISABLE_HI_CHANNELS 166
//
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_BMI_NVRAM_PROCESS)
// * UINT8 name[BMI_NVRAM_SEG_NAME_SZ]
// * uses: BMI_NVRAM_PROCESS
// */
//
//
//#ifdef CONFIG_HOST_TCMD_SUPPORT
///* ====additional extended commands for radio test ==== */
//
//#define AR6000_XIOCTL_TCMD_CMDS 167
///*
// * arguments:
// * UINT32 cmd (AR6000_XIOCTL_TCMD_CMDS)
// * WMI_TCMD_CMDS_CMD cmdsCmd (see include/wmi.h)
// * uses: WMI_TCMD_CMDS_CMDID
// */
//
//#endif //ifdef CONFIG_HOST_TCMD_SUPPORT
//
//#define AR6000_XIOCTL_WMI_SET_DIVERSITY_PARAM 168
//
//#define AR6000_XIOCTL_WMI_FORCE_ASSERT 169
//
//#define AR6000_XIOCTL_WMI_SET_EXCESS_TX_RETRY_THRES 170
//
//#define AR6000_XIOCTL_AP_GET_NUM_STA 171
//
//#define AR6000_XIOCTL_SUSPEND_DRIVER 172
//
//#define AR6000_XIOCTL_RESUME_DRIVER 173
/* used by AR6000_IOCTL_WMI_GETREV */
struct ar6000_version {
A_UINT32 host_ver;
A_UINT32 target_ver;
A_UINT32 wlan_ver;
A_UINT32 abi_ver;
A_UINT32 targetconf_ver;
};
/* used by AR6000_IOCTL_WMI_GET_QOS_QUEUE */
struct ar6000_queuereq {
A_UINT8 trafficClass;
A_UINT16 activeTsids;
};
/* used by AR6000_IOCTL_WMI_GET_TARGET_STATS */
typedef struct targetStats_t {
A_UINT64 tx_packets;
A_UINT64 tx_bytes;
A_UINT64 tx_unicast_pkts;
A_UINT64 tx_unicast_bytes;
A_UINT64 tx_multicast_pkts;
A_UINT64 tx_multicast_bytes;
A_UINT64 tx_broadcast_pkts;
A_UINT64 tx_broadcast_bytes;
A_UINT64 tx_rts_success_cnt;
A_UINT64 tx_packet_per_ac[4];
A_UINT64 tx_errors;
A_UINT64 tx_failed_cnt;
A_UINT64 tx_retry_cnt;
A_UINT64 tx_mult_retry_cnt;
A_UINT64 tx_rts_fail_cnt;
A_UINT64 rx_packets;
A_UINT64 rx_bytes;
A_UINT64 rx_unicast_pkts;
A_UINT64 rx_unicast_bytes;
A_UINT64 rx_multicast_pkts;
A_UINT64 rx_multicast_bytes;
A_UINT64 rx_broadcast_pkts;
A_UINT64 rx_broadcast_bytes;
A_UINT64 rx_fragment_pkt;
A_UINT64 rx_errors;
A_UINT64 rx_crcerr;
A_UINT64 rx_key_cache_miss;
A_UINT64 rx_decrypt_err;
A_UINT64 rx_duplicate_frames;
A_UINT64 tkip_local_mic_failure;
A_UINT64 tkip_counter_measures_invoked;
A_UINT64 tkip_replays;
A_UINT64 tkip_format_errors;
A_UINT64 ccmp_format_errors;
A_UINT64 ccmp_replays;
A_UINT64 power_save_failure_cnt;
A_UINT64 cs_bmiss_cnt;
A_UINT64 cs_lowRssi_cnt;
A_UINT64 cs_connect_cnt;
A_UINT64 cs_disconnect_cnt;
A_INT32 tx_unicast_rate;
A_INT32 rx_unicast_rate;
A_UINT32 lq_val;
A_UINT32 wow_num_pkts_dropped;
A_UINT16 wow_num_events_discarded;
A_INT16 noise_floor_calibation;
A_INT16 cs_rssi;
A_INT16 cs_aveBeacon_rssi;
A_UINT8 cs_aveBeacon_snr;
A_UINT8 cs_lastRoam_msec;
A_UINT8 cs_snr;
A_UINT8 wow_num_host_pkt_wakeups;
A_UINT8 wow_num_host_event_wakeups;
A_UINT32 arp_received;
A_UINT32 arp_matched;
A_UINT32 arp_replied;
}TARGET_STATS;
typedef struct targetStats_cmd_t {
TARGET_STATS targetStats;
int clearStats;
} TARGET_STATS_CMD;
/* used by AR6000_XIOCTL_USER_SETKEYS */
/*
* Setting this bit to 1 doesnot initialize the RSC on the firmware
*/
#define AR6000_XIOCTL_USER_SETKEYS_RSC_CTRL 1
#define AR6000_USER_SETKEYS_RSC_UNCHANGED 0x00000002
typedef struct {
A_UINT32 keyOpCtrl; /* Bit Map of Key Mgmt Ctrl Flags */
} AR6000_USER_SETKEYS_INFO;
/* used by AR6000_XIOCTL_GPIO_OUTPUT_SET */
struct ar6000_gpio_output_set_cmd_s {
A_UINT32 set_mask;
A_UINT32 clear_mask;
A_UINT32 enable_mask;
A_UINT32 disable_mask;
};
/*
* used by AR6000_XIOCTL_GPIO_REGISTER_GET and AR6000_XIOCTL_GPIO_REGISTER_SET
*/
struct ar6000_gpio_register_cmd_s {
A_UINT32 gpioreg_id;
A_UINT32 value;
};
/* used by AR6000_XIOCTL_GPIO_INTR_ACK */
struct ar6000_gpio_intr_ack_cmd_s {
A_UINT32 ack_mask;
};
/* used by AR6000_XIOCTL_GPIO_INTR_WAIT */
struct ar6000_gpio_intr_wait_cmd_s {
A_UINT32 intr_mask;
A_UINT32 input_values;
};
/* used by the AR6000_XIOCTL_DBGLOG_CFG_MODULE */
typedef struct ar6000_dbglog_module_config_s {
A_UINT32 valid;
A_UINT16 mmask;
A_UINT16 tsr;
A_BOOL rep;
A_UINT16 size;
} DBGLOG_MODULE_CONFIG;
typedef struct user_rssi_thold_t {
A_INT16 tag;
A_INT16 rssi;
} USER_RSSI_THOLD;
typedef struct user_rssi_params_t {
A_UINT8 weight;
A_UINT32 pollTime;
USER_RSSI_THOLD tholds[12];
} USER_RSSI_PARAMS;
typedef struct ar6000_get_btcoex_config_cmd_t{
A_UINT32 btProfileType;
A_UINT32 linkId;
}AR6000_GET_BTCOEX_CONFIG_CMD;
typedef struct ar6000_btcoex_config_t {
AR6000_GET_BTCOEX_CONFIG_CMD configCmd;
A_UINT32 * configEvent;
} AR6000_BTCOEX_CONFIG;
typedef struct ar6000_btcoex_stats_t {
A_UINT32 * statsEvent;
}AR6000_BTCOEX_STATS;
/*
* Host driver may have some config parameters. Typically, these
* config params are one time config parameters. These could
* correspond to any of the underlying modules. Host driver exposes
* an api for the underlying modules to get this config.
*/
#define AR6000_DRIVER_CFG_BASE 0x8000
/* Should driver perform wlan node caching? */
#define AR6000_DRIVER_CFG_GET_WLANNODECACHING 0x8001
/*Should we log raw WMI msgs */
#define AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS 0x8002
/* used by AR6000_XIOCTL_DIAG_READ & AR6000_XIOCTL_DIAG_WRITE */
struct ar6000_diag_window_cmd_s {
unsigned int addr;
unsigned int value;
};
struct ar6000_traffic_activity_change {
A_UINT32 StreamID; /* stream ID to indicate activity change */
A_UINT32 Active; /* active (1) or inactive (0) */
};
/* Used with AR6000_XIOCTL_PROF_COUNT_GET */
struct prof_count_s {
A_UINT32 addr; /* bin start address */
A_UINT32 count; /* hit count */
};
/* used by AR6000_XIOCTL_MODULE_DEBUG_SET_MASK */
/* AR6000_XIOCTL_MODULE_DEBUG_GET_MASK */
/* AR6000_XIOCTL_DUMP_MODULE_DEBUG_INFO */
struct drv_debug_module_s {
A_CHAR modulename[128]; /* name of module */
A_UINT32 mask; /* new mask to set .. or .. current mask */
};
/* used by AR6000_XIOCTL_P2P_AUTH_INVITE */
#define ATH_MAC_LEN 6
typedef PREPACK struct {
A_UINT32 auth;
A_UINT8 peer_addr[ATH_MAC_LEN];
}POSTPACK P2P_AUTH_INVITE_CMD;
/* All HCI related rx events are sent up to the host app
* via a wmi event id. It can contain ACL data or HCI event,
* based on which it will be de-multiplexed.
*/
typedef enum {
PAL_HCI_EVENT = 0,
PAL_HCI_RX_DATA,
} WMI_PAL_EVENT_INFO;
#ifdef __cplusplus
}
#endif
#endif