/* Optimized strcmp implementation for PowerPC64.
   Copyright (C) 2003, 2006 Free Software Foundation, Inc.
   This file is part of the GNU C Library.

   The GNU C Library is free software; you can redistribute it and/or
   modify it under the terms of the GNU Lesser General Public
   License as published by the Free Software Foundation; either
   version 2.1 of the License, or (at your option) any later version.

   The GNU C Library is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
   Lesser General Public License for more details.

   You should have received a copy of the GNU Lesser General Public
   License along with the GNU C Library; if not, write to the Free
   Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA
   02110-1301 USA.  */

#include <sysdep.h>
#include <bp-sym.h>
#include <bp-asm.h>

/* int [r3] memcmp (const char *s1 [r3], const char *s2 [r4], size_t size [r5])  */

	.machine power4
EALIGN (BP_SYM(memcmp), 4, 0)
	CALL_MCOUNT 3

#define rTMP	r0
#define rRTN	r3
#define rSTR1	r3	/* first string arg */
#define rSTR2	r4	/* second string arg */
#define rN	r5	/* max string length */
/* Note:  The Bounded pointer support in this code is broken.  This code
   was inherited from PPC32 and and that support was never completed.  
   Current PPC gcc does not support -fbounds-check or -fbounded-pointers.  */
#define rWORD1	r6	/* current word in s1 */
#define rWORD2	r7	/* current word in s2 */
#define rWORD3	r8	/* next word in s1 */
#define rWORD4	r9	/* next word in s2 */
#define rWORD5	r10	/* next word in s1 */
#define rWORD6	r11	/* next word in s2 */
#define rBITDIF	r12	/* bits that differ in s1 & s2 words */
#define rWORD7	r30	/* next word in s1 */
#define rWORD8	r31	/* next word in s2 */

	xor	rTMP, rSTR2, rSTR1
	cmpldi	cr6, rN, 0
	cmpldi	cr1, rN, 12
	clrldi.	rTMP, rTMP, 61
	clrldi	rBITDIF, rSTR1, 61
	cmpldi	cr5, rBITDIF, 0
	beq-	cr6, L(zeroLength)
	dcbt	0,rSTR1
	dcbt	0,rSTR2
/* If less than 8 bytes or not aligned, use the unalligned
   byte loop.  */
	blt	cr1, L(bytealigned)
	std	rWORD8,-8(r1)	
	cfi_offset(rWORD8,-8)
	std	rWORD7,-16(r1)	
	cfi_offset(rWORD7,-16)
	bne	L(unaligned)
/* At this point we know both strings have the same alignment and the
   compare length is at least 8 bytes.  rBITDIF containes the low order
   3 bits of rSTR1 and cr5 contains the result of the logical compare
   of rBITDIF to 0.  If rBITDIF == 0 then we are already double word 
   aligned and can perform the DWaligned loop.
  
   Otherwise we know the two strings have the same alignment (but not
   yet DW).  So we can force the string addresses to the next lower DW
   boundary and special case this first DW word using shift left to
   ellimiate bits preceeding the first byte.  Since we want to join the
   normal (DWaligned) compare loop, starting at the second double word,
   we need to adjust the length (rN) and special case the loop
   versioning for the first DW. This insures that the loop count is
   correct and the first DW (shifted) is in the expected resister pair.  */
	.align 4
L(samealignment):
	clrrdi	rSTR1, rSTR1, 3
	clrrdi	rSTR2, rSTR2, 3
	beq	cr5, L(DWaligned)
	add	rN, rN, rBITDIF
	sldi	r11, rBITDIF, 3
	srdi	rTMP, rN, 5	/* Divide by 32 */
	andi.	rBITDIF, rN, 24	/* Get the DW remainder */
	ld	rWORD1, 0(rSTR1)
	ld	rWORD2, 0(rSTR2)
	cmpldi	cr1, rBITDIF, 16
	cmpldi	cr7, rN, 32
	clrldi	rN, rN, 61
	beq	L(dPs4)
	mtctr   rTMP	/* Power4 wants mtctr 1st in dispatch group */
	bgt	cr1, L(dPs3)
	beq	cr1, L(dPs2)

/* Remainder is 8 */
	.align 3
L(dsP1):
	sld	rWORD5, rWORD1, r11
	sld	rWORD6, rWORD2, r11
	cmpld	cr5, rWORD5, rWORD6
	blt	cr7, L(dP1x)
/* Do something useful in this cycle since we have to branch anyway.  */
	ld	rWORD1, 8(rSTR1)
	ld	rWORD2, 8(rSTR2)
	cmpld	cr0, rWORD1, rWORD2
	b	L(dP1e)
/* Remainder is 16 */
	.align 4
L(dPs2):
	sld	rWORD5, rWORD1, r11
	sld	rWORD6, rWORD2, r11
	cmpld	cr6, rWORD5, rWORD6
	blt	cr7, L(dP2x)
/* Do something useful in this cycle since we have to branch anyway.  */
	ld	rWORD7, 8(rSTR1)
	ld	rWORD8, 8(rSTR2)
	cmpld	cr5, rWORD7, rWORD8
	b	L(dP2e)
/* Remainder is 24 */
	.align 4
L(dPs3):
	sld	rWORD3, rWORD1, r11
	sld	rWORD4, rWORD2, r11
	cmpld	cr1, rWORD3, rWORD4
	b	L(dP3e)
/* Count is a multiple of 32, remainder is 0 */
	.align 4
L(dPs4):
	mtctr   rTMP	/* Power4 wants mtctr 1st in dispatch group */
	sld	rWORD1, rWORD1, r11
	sld	rWORD2, rWORD2, r11
	cmpld	cr0, rWORD1, rWORD2
	b	L(dP4e)

/* At this point we know both strings are double word aligned and the
   compare length is at least 8 bytes.  */
	.align 4
L(DWaligned):
	andi.	rBITDIF, rN, 24	/* Get the DW remainder */
	srdi	rTMP, rN, 5	/* Divide by 32 */
	cmpldi	cr1, rBITDIF, 16
	cmpldi	cr7, rN, 32
	clrldi	rN, rN, 61
	beq	L(dP4)
	bgt	cr1, L(dP3)
	beq	cr1, L(dP2)
		
/* Remainder is 8 */
	.align 4
L(dP1):
	mtctr   rTMP	/* Power4 wants mtctr 1st in dispatch group */
/* Normally we'd use rWORD7/rWORD8 here, but since we might exit early
   (8-15 byte compare), we want to use only volitile registers.  This
   means we can avoid restoring non-volitile registers since we did not
   change any on the early exit path.  The key here is the non-early
   exit path only cares about the condition code (cr5), not about which 
   register pair was used.  */
	ld	rWORD5, 0(rSTR1)
	ld	rWORD6, 0(rSTR2)
	cmpld	cr5, rWORD5, rWORD6
	blt	cr7, L(dP1x)
	ld	rWORD1, 8(rSTR1)
	ld	rWORD2, 8(rSTR2)
	cmpld	cr0, rWORD1, rWORD2
L(dP1e):
	ld	rWORD3, 16(rSTR1)
	ld	rWORD4, 16(rSTR2)
	cmpld	cr1, rWORD3, rWORD4
	ld	rWORD5, 24(rSTR1)
	ld	rWORD6, 24(rSTR2)
	cmpld	cr6, rWORD5, rWORD6
	bne	cr5, L(dLcr5)
	bne	cr0, L(dLcr0)
	
	ldu	rWORD7, 32(rSTR1)
	ldu	rWORD8, 32(rSTR2)
	bne	cr1, L(dLcr1)
	cmpld	cr5, rWORD7, rWORD8
	bdnz	L(dLoop)
	bne	cr6, L(dLcr6)
	ld	rWORD8,-8(r1)
	ld	rWORD7,-16(r1)
	.align 3
L(dP1x):
	sldi.	r12, rN, 3
	bne	cr5, L(dLcr5)
	subfic	rN, r12, 64	/* Shift count is 64 - (rN * 8).  */
	bne	L(d00)
	li	rRTN, 0
	blr
		
/* Remainder is 16 */
	.align 4
L(dP2):
	mtctr   rTMP	/* Power4 wants mtctr 1st in dispatch group */
	ld	rWORD5, 0(rSTR1)
	ld	rWORD6, 0(rSTR2)
	cmpld	cr6, rWORD5, rWORD6
	blt	cr7, L(dP2x)
	ld	rWORD7, 8(rSTR1)
	ld	rWORD8, 8(rSTR2)
	cmpld	cr5, rWORD7, rWORD8
L(dP2e):
	ld	rWORD1, 16(rSTR1)
	ld	rWORD2, 16(rSTR2)
	cmpld	cr0, rWORD1, rWORD2
	ld	rWORD3, 24(rSTR1)
	ld	rWORD4, 24(rSTR2)
	cmpld	cr1, rWORD3, rWORD4
	addi	rSTR1, rSTR1, 8
	addi	rSTR2, rSTR2, 8
	bne	cr6, L(dLcr6)
	bne	cr5, L(dLcr5)
	b	L(dLoop2)
/* Again we are on a early exit path (16-23 byte compare), we want to
   only use volitile registers and avoid restoring non-volitile
   registers.  */
	.align 4
L(dP2x):
	ld	rWORD3, 8(rSTR1)
	ld	rWORD4, 8(rSTR2)
	cmpld	cr5, rWORD3, rWORD4
	sldi.	r12, rN, 3
	bne	cr6, L(dLcr6)
	addi	rSTR1, rSTR1, 8
	addi	rSTR2, rSTR2, 8
	bne	cr5, L(dLcr5)
	subfic	rN, r12, 64	/* Shift count is 64 - (rN * 8).  */
	bne	L(d00)
	li	rRTN, 0
	blr
		
/* Remainder is 24 */
	.align 4
L(dP3):
	mtctr   rTMP	/* Power4 wants mtctr 1st in dispatch group */
	ld	rWORD3, 0(rSTR1)
	ld	rWORD4, 0(rSTR2)
	cmpld	cr1, rWORD3, rWORD4
L(dP3e):
	ld	rWORD5, 8(rSTR1)
	ld	rWORD6, 8(rSTR2)
	cmpld	cr6, rWORD5, rWORD6
	blt	cr7, L(dP3x)
	ld	rWORD7, 16(rSTR1)
	ld	rWORD8, 16(rSTR2)
	cmpld	cr5, rWORD7, rWORD8
	ld	rWORD1, 24(rSTR1)
	ld	rWORD2, 24(rSTR2)
	cmpld	cr0, rWORD1, rWORD2
	addi	rSTR1, rSTR1, 16
	addi	rSTR2, rSTR2, 16
	bne	cr1, L(dLcr1)
	bne	cr6, L(dLcr6)
	b	L(dLoop1)
/* Again we are on a early exit path (24-31 byte compare), we want to
   only use volitile registers and avoid restoring non-volitile
   registers.  */
	.align 4
L(dP3x):
	ld	rWORD1, 16(rSTR1)
	ld	rWORD2, 16(rSTR2)
	cmpld	cr5, rWORD1, rWORD2
	sldi.	r12, rN, 3
	bne	cr1, L(dLcr1)
	addi	rSTR1, rSTR1, 16
	addi	rSTR2, rSTR2, 16
	bne	cr6, L(dLcr6)
	subfic	rN, r12, 64	/* Shift count is 64 - (rN * 8).  */
	bne	cr5, L(dLcr5)
	bne	L(d00)
	li	rRTN, 0
	blr
	
/* Count is a multiple of 32, remainder is 0 */
	.align 4
L(dP4):
	mtctr   rTMP	/* Power4 wants mtctr 1st in dispatch group */
	ld	rWORD1, 0(rSTR1)
	ld	rWORD2, 0(rSTR2)
	cmpld	cr0, rWORD1, rWORD2
L(dP4e):
	ld	rWORD3, 8(rSTR1)
	ld	rWORD4, 8(rSTR2)
	cmpld	cr1, rWORD3, rWORD4
	ld	rWORD5, 16(rSTR1)
	ld	rWORD6, 16(rSTR2)
	cmpld	cr6, rWORD5, rWORD6
	ldu	rWORD7, 24(rSTR1)
	ldu	rWORD8, 24(rSTR2)
	cmpld	cr5, rWORD7, rWORD8
	bne	cr0, L(dLcr0)
	bne	cr1, L(dLcr1)
	bdz-	L(d24)		/* Adjust CTR as we start with +4 */
/* This is the primary loop */
	.align 4
L(dLoop):
	ld	rWORD1, 8(rSTR1)
	ld	rWORD2, 8(rSTR2)
	cmpld	cr1, rWORD3, rWORD4
	bne	cr6, L(dLcr6)
L(dLoop1):
	ld	rWORD3, 16(rSTR1)
	ld	rWORD4, 16(rSTR2)
	cmpld	cr6, rWORD5, rWORD6
	bne	cr5, L(dLcr5)
L(dLoop2):
	ld	rWORD5, 24(rSTR1)
	ld	rWORD6, 24(rSTR2)
	cmpld	cr5, rWORD7, rWORD8
	bne	cr0, L(dLcr0)
L(dLoop3):
	ldu	rWORD7, 32(rSTR1)
	ldu	rWORD8, 32(rSTR2)
	bne-	cr1, L(dLcr1)
	cmpld	cr0, rWORD1, rWORD2
	bdnz+	L(dLoop)	
	
L(dL4):
	cmpld	cr1, rWORD3, rWORD4
	bne	cr6, L(dLcr6)
	cmpld	cr6, rWORD5, rWORD6
	bne	cr5, L(dLcr5)
	cmpld	cr5, rWORD7, rWORD8
L(d44):
	bne	cr0, L(dLcr0)
L(d34):
	bne	cr1, L(dLcr1)
L(d24):
	bne	cr6, L(dLcr6)
L(d14):
	sldi.	r12, rN, 3
	bne	cr5, L(dLcr5) 
L(d04):
	ld	rWORD8,-8(r1)
	ld	rWORD7,-16(r1)
	subfic	rN, r12, 64	/* Shift count is 64 - (rN * 8).  */
	beq	L(zeroLength)
/* At this point we have a remainder of 1 to 7 bytes to compare.  Since
   we are aligned it is safe to load the whole double word, and use
   shift right double to elliminate bits beyond the compare length.  */ 
L(d00):
	ld	rWORD1, 8(rSTR1)
	ld	rWORD2, 8(rSTR2) 
	srd	rWORD1, rWORD1, rN
	srd	rWORD2, rWORD2, rN
	cmpld	cr5, rWORD1, rWORD2
 	bne	cr5, L(dLcr5x)
	li	rRTN, 0
	blr
	.align 4
L(dLcr0):
	ld	rWORD8,-8(r1)
	ld	rWORD7,-16(r1)
	li	rRTN, 1
	bgtlr	cr0
	li	rRTN, -1
	blr
	.align 4
L(dLcr1):
	ld	rWORD8,-8(r1)
	ld	rWORD7,-16(r1)
	li	rRTN, 1
	bgtlr	cr1
	li	rRTN, -1
	blr
	.align 4
L(dLcr6):
	ld	rWORD8,-8(r1)
	ld	rWORD7,-16(r1)
	li	rRTN, 1
	bgtlr	cr6
	li	rRTN, -1
	blr
	.align 4
L(dLcr5):
	ld	rWORD8,-8(r1)
	ld	rWORD7,-16(r1)
L(dLcr5x):
	li	rRTN, 1
	bgtlr	cr5
	li	rRTN, -1
	blr
	
	.align 4
L(bytealigned):
	mtctr   rN	/* Power4 wants mtctr 1st in dispatch group */
	beq-	cr6, L(zeroLength)

/* We need to prime this loop.  This loop is swing modulo scheduled
   to avoid pipe delays.  The dependent instruction latencies (load to 
   compare to conditional branch) is 2 to 3 cycles.  In this loop each
   dispatch group ends in a branch and takes 1 cycle.  Effectively
   the first iteration of the loop only serves to load operands and 
   branches based on compares are delayed until the next loop. 

   So we must precondition some registers and condition codes so that
   we don't exit the loop early on the first iteration.  */
   
	lbz	rWORD1, 0(rSTR1)
	lbz	rWORD2, 0(rSTR2)
	bdz-	L(b11)
	cmpld	cr0, rWORD1, rWORD2
	lbz	rWORD3, 1(rSTR1)
	lbz	rWORD4, 1(rSTR2)
	bdz-	L(b12)
	cmpld	cr1, rWORD3, rWORD4
	lbzu	rWORD5, 2(rSTR1)
	lbzu	rWORD6, 2(rSTR2)
	bdz-	L(b13)
	.align 4
L(bLoop):
	lbzu	rWORD1, 1(rSTR1)
	lbzu	rWORD2, 1(rSTR2)
	bne-	cr0, L(bLcr0)

	cmpld	cr6, rWORD5, rWORD6
	bdz-	L(b3i)
	
	lbzu	rWORD3, 1(rSTR1)
	lbzu	rWORD4, 1(rSTR2)
	bne-	cr1, L(bLcr1)

	cmpld	cr0, rWORD1, rWORD2
	bdz-	L(b2i)

	lbzu	rWORD5, 1(rSTR1)
	lbzu	rWORD6, 1(rSTR2)
	bne-	cr6, L(bLcr6)

	cmpld	cr1, rWORD3, rWORD4
	bdnz+	L(bLoop)
	
/* We speculatively loading bytes before we have tested the previous
   bytes.  But we must avoid overrunning the length (in the ctr) to
   prevent these speculative loads from causing a segfault.  In this 
   case the loop will exit early (before the all pending bytes are
   tested.  In this case we must complete the pending operations
   before returning.  */
L(b1i):
	bne-	cr0, L(bLcr0)
	bne-	cr1, L(bLcr1)
	b	L(bx56)
	.align 4
L(b2i):
	bne-	cr6, L(bLcr6)
	bne-	cr0, L(bLcr0)
	b	L(bx34)
	.align 4
L(b3i):
	bne-	cr1, L(bLcr1)
	bne-	cr6, L(bLcr6)
	b	L(bx12)
	.align 4
L(bLcr0):
	li	rRTN, 1
	bgtlr	cr0
	li	rRTN, -1
	blr
L(bLcr1):
	li	rRTN, 1
	bgtlr	cr1
	li	rRTN, -1
	blr
L(bLcr6):
	li	rRTN, 1
	bgtlr	cr6
	li	rRTN, -1
	blr

L(b13):
	bne-	cr0, L(bx12)
	bne-	cr1, L(bx34)
L(bx56):
	sub	rRTN, rWORD5, rWORD6
	blr
	nop
L(b12):
	bne-	cr0, L(bx12)
L(bx34):	
	sub	rRTN, rWORD3, rWORD4
	blr
L(b11):
L(bx12):
	sub	rRTN, rWORD1, rWORD2
	blr
	.align 4 
L(zeroLengthReturn):
	ld	rWORD8,-8(r1)
	ld	rWORD7,-16(r1)
L(zeroLength):
	li	rRTN, 0
	blr

	.align 4
/* At this point we know the strings have different alignment and the
   compare length is at least 8 bytes.  rBITDIF containes the low order
   3 bits of rSTR1 and cr5 contains the result of the logical compare
   of rBITDIF to 0.  If rBITDIF == 0 then rStr1 is double word 
   aligned and can perform the DWunaligned loop.
  
   Otherwise we know that rSTR1 is not aready DW aligned yet.
   So we can force the string addresses to the next lower DW
   boundary and special case this first DW word using shift left to
   ellimiate bits preceeding the first byte.  Since we want to join the
   normal (DWaligned) compare loop, starting at the second double word,
   we need to adjust the length (rN) and special case the loop
   versioning for the first DW. This insures that the loop count is
   correct and the first DW (shifted) is in the expected resister pair.  */
#define rSHL	r29	/* Unaligned shift left count.  */
#define rSHR	r28	/* Unaligned shift right count.  */
#define rB		r27	/* Left rotation temp for rWORD2.  */
#define rD		r26	/* Left rotation temp for rWORD4.  */
#define rF		r25	/* Left rotation temp for rWORD6.  */
#define rH		r24	/* Left rotation temp for rWORD8.  */
#define rA		r0	/* Right rotation temp for rWORD2.  */
#define rC		r12	/* Right rotation temp for rWORD4.  */
#define rE		r0	/* Right rotation temp for rWORD6.  */
#define rG		r12	/* Right rotation temp for rWORD8.  */
L(unaligned):
	std	r29,-24(r1)	
	cfi_offset(r29,-24)
	clrldi	rSHL, rSTR2, 61
	beq-	cr6, L(duzeroLength)
	std	r28,-32(r1)	
	cfi_offset(r28,-32)
	beq	cr5, L(DWunaligned)
	std	r27,-40(r1)	
	cfi_offset(r27,-40)
/* Adjust the logical start of rSTR2 ro compensate for the extra bits
   in the 1st rSTR1 DW.  */
	sub	r27, rSTR2, rBITDIF
/* But do not attempt to address the DW before that DW that contains
   the actual start of rSTR2.  */
	clrrdi	rSTR2, rSTR2, 3
	std	r26,-48(r1)	
	cfi_offset(r26,-48)
/* Compute the leaft/right shift counts for the unalign rSTR2,
   compensating for the logical (DW aligned) start of rSTR1.  */ 
	clrldi	rSHL, r27, 61
	clrrdi	rSTR1, rSTR1, 3	
	std	r25,-56(r1)	
	cfi_offset(r25,-56)
	sldi	rSHL, rSHL, 3
	cmpld	cr5, r27, rSTR2
	add	rN, rN, rBITDIF
	sldi	r11, rBITDIF, 3
	std	r24,-64(r1)	
	cfi_offset(r24,-64)
	subfic	rSHR, rSHL, 64
	srdi	rTMP, rN, 5	/* Divide by 32 */
	andi.	rBITDIF, rN, 24	/* Get the DW remainder */
/* We normally need to load 2 DWs to start the unaligned rSTR2, but in
   this special case those bits may be discarded anyway.  Also we
   must avoid loading a DW where none of the bits are part of rSTR2 as
   this may cross a page boundary and cause a page fault.  */
	li	rWORD8, 0
	blt	cr5, L(dus0)
	ld	rWORD8, 0(rSTR2)
	la	rSTR2, 8(rSTR2)
	sld	rWORD8, rWORD8, rSHL

L(dus0):
	ld	rWORD1, 0(rSTR1)
	ld	rWORD2, 0(rSTR2)
	cmpldi	cr1, rBITDIF, 16
	cmpldi	cr7, rN, 32
	srd	rG, rWORD2, rSHR
	clrldi	rN, rN, 61
	beq	L(duPs4)
	mtctr   rTMP	/* Power4 wants mtctr 1st in dispatch group */
	or	rWORD8, rG, rWORD8
	bgt	cr1, L(duPs3)
	beq	cr1, L(duPs2)

/* Remainder is 8 */
	.align 4
L(dusP1):
	sld	rB, rWORD2, rSHL
	sld	rWORD7, rWORD1, r11
	sld	rWORD8, rWORD8, r11
	bge	cr7, L(duP1e)
/* At this point we exit early with the first double word compare
   complete and remainder of 0 to 7 bytes.  See L(du14) for details on
   how we handle the remaining bytes.  */
	cmpld	cr5, rWORD7, rWORD8
	sldi.	rN, rN, 3
	bne	cr5, L(duLcr5)
	cmpld	cr7, rN, rSHR
	beq	L(duZeroReturn)
	li	rA, 0
	ble	cr7, L(dutrim)
	ld	rWORD2, 8(rSTR2)
	srd	rA, rWORD2, rSHR
	b	L(dutrim)
/* Remainder is 16 */
	.align 4
L(duPs2):
	sld	rH, rWORD2, rSHL
	sld	rWORD5, rWORD1, r11
	sld	rWORD6, rWORD8, r11
	b	L(duP2e)
/* Remainder is 24 */
	.align 4
L(duPs3):
	sld	rF, rWORD2, rSHL
	sld	rWORD3, rWORD1, r11
	sld	rWORD4, rWORD8, r11
	b	L(duP3e)
/* Count is a multiple of 32, remainder is 0 */
	.align 4
L(duPs4):
	mtctr   rTMP	/* Power4 wants mtctr 1st in dispatch group */
	or	rWORD8, rG, rWORD8
	sld	rD, rWORD2, rSHL
	sld	rWORD1, rWORD1, r11
	sld	rWORD2, rWORD8, r11
	b	L(duP4e)

/* At this point we know rSTR1 is double word aligned and the
   compare length is at least 8 bytes.  */
	.align 4
L(DWunaligned):
	std	r27,-40(r1)	
	cfi_offset(r27,-40)
	clrrdi	rSTR2, rSTR2, 3
	std	r26,-48(r1)	
	cfi_offset(r26,-48)
	srdi	rTMP, rN, 5	/* Divide by 32 */
	std	r25,-56(r1)	
	cfi_offset(r25,-56)
	andi.	rBITDIF, rN, 24	/* Get the DW remainder */
	std	r24,-64(r1)	
	cfi_offset(r24,-64)
	sldi	rSHL, rSHL, 3
	ld	rWORD6, 0(rSTR2)
	ldu	rWORD8, 8(rSTR2)
	cmpldi	cr1, rBITDIF, 16
	cmpldi	cr7, rN, 32
	clrldi	rN, rN, 61
	subfic	rSHR, rSHL, 64
	sld	rH, rWORD6, rSHL
	beq	L(duP4)
	mtctr   rTMP	/* Power4 wants mtctr 1st in dispatch group */
	bgt	cr1, L(duP3)
	beq	cr1, L(duP2)
		
/* Remainder is 8 */
	.align 4
L(duP1):
	srd	rG, rWORD8, rSHR
	ld	rWORD7, 0(rSTR1)
	sld	rB, rWORD8, rSHL
	or	rWORD8, rG, rH
	blt	cr7, L(duP1x)
L(duP1e):
	ld	rWORD1, 8(rSTR1)
	ld	rWORD2, 8(rSTR2)
	cmpld	cr5, rWORD7, rWORD8
	srd	rA, rWORD2, rSHR
	sld	rD, rWORD2, rSHL
	or	rWORD2, rA, rB
	ld	rWORD3, 16(rSTR1)
	ld	rWORD4, 16(rSTR2)
	cmpld	cr0, rWORD1, rWORD2
	srd	rC, rWORD4, rSHR
	sld	rF, rWORD4, rSHL
	bne	cr5, L(duLcr5)
	or	rWORD4, rC, rD
	ld	rWORD5, 24(rSTR1)
	ld	rWORD6, 24(rSTR2)
	cmpld	cr1, rWORD3, rWORD4
	srd	rE, rWORD6, rSHR
	sld	rH, rWORD6, rSHL
	bne	cr0, L(duLcr0)
	or	rWORD6, rE, rF
	cmpld	cr6, rWORD5, rWORD6
	b	L(duLoop3)	
	.align 4
/* At this point we exit early with the first double word compare
   complete and remainder of 0 to 7 bytes.  See L(du14) for details on
   how we handle the remaining bytes.  */
L(duP1x):
	cmpld	cr5, rWORD7, rWORD8
	sldi.	rN, rN, 3
	bne	cr5, L(duLcr5)
	cmpld	cr7, rN, rSHR
	beq	L(duZeroReturn)
	li	rA, 0
	ble	cr7, L(dutrim)
	ld	rWORD2, 8(rSTR2)
	srd	rA, rWORD2, rSHR
	b	L(dutrim)
/* Remainder is 16 */
	.align 4
L(duP2):
	srd	rE, rWORD8, rSHR
	ld	rWORD5, 0(rSTR1)
	or	rWORD6, rE, rH
	sld	rH, rWORD8, rSHL
L(duP2e):
	ld	rWORD7, 8(rSTR1)
	ld	rWORD8, 8(rSTR2)
	cmpld	cr6, rWORD5, rWORD6
	srd	rG, rWORD8, rSHR
	sld	rB, rWORD8, rSHL
	or	rWORD8, rG, rH
	blt	cr7, L(duP2x)
	ld	rWORD1, 16(rSTR1)
	ld	rWORD2, 16(rSTR2)
	cmpld	cr5, rWORD7, rWORD8
	bne	cr6, L(duLcr6)
	srd	rA, rWORD2, rSHR
	sld	rD, rWORD2, rSHL
	or	rWORD2, rA, rB
	ld	rWORD3, 24(rSTR1)
	ld	rWORD4, 24(rSTR2)
	cmpld	cr0, rWORD1, rWORD2
	bne	cr5, L(duLcr5)
	srd	rC, rWORD4, rSHR
	sld	rF, rWORD4, rSHL
	or	rWORD4, rC, rD
	addi	rSTR1, rSTR1, 8
	addi	rSTR2, rSTR2, 8
	cmpld	cr1, rWORD3, rWORD4
	b	L(duLoop2)
	.align 4
L(duP2x):
	cmpld	cr5, rWORD7, rWORD8
	addi	rSTR1, rSTR1, 8
	addi	rSTR2, rSTR2, 8
	bne	cr6, L(duLcr6)
	sldi.	rN, rN, 3
	bne	cr5, L(duLcr5)
	cmpld	cr7, rN, rSHR
	beq	L(duZeroReturn)
	li	rA, 0
	ble	cr7, L(dutrim)
	ld	rWORD2, 8(rSTR2)
	srd	rA, rWORD2, rSHR
	b	L(dutrim)
		
/* Remainder is 24 */
	.align 4
L(duP3):
	srd	rC, rWORD8, rSHR
	ld	rWORD3, 0(rSTR1)
	sld	rF, rWORD8, rSHL
	or	rWORD4, rC, rH
L(duP3e):
	ld	rWORD5, 8(rSTR1)
	ld	rWORD6, 8(rSTR2)
	cmpld	cr1, rWORD3, rWORD4
	srd	rE, rWORD6, rSHR
	sld	rH, rWORD6, rSHL
	or	rWORD6, rE, rF
	ld	rWORD7, 16(rSTR1)
	ld	rWORD8, 16(rSTR2)
	cmpld	cr6, rWORD5, rWORD6
	bne	cr1, L(duLcr1)
	srd	rG, rWORD8, rSHR
	sld	rB, rWORD8, rSHL
	or	rWORD8, rG, rH
	blt	cr7, L(duP3x)
	ld	rWORD1, 24(rSTR1)
	ld	rWORD2, 24(rSTR2)
	cmpld	cr5, rWORD7, rWORD8
	bne	cr6, L(duLcr6)
	srd	rA, rWORD2, rSHR
	sld	rD, rWORD2, rSHL
	or	rWORD2, rA, rB
	addi	rSTR1, rSTR1, 16
	addi	rSTR2, rSTR2, 16
	cmpld	cr0, rWORD1, rWORD2
	b	L(duLoop1)
	.align 4
L(duP3x):
	addi	rSTR1, rSTR1, 16
	addi	rSTR2, rSTR2, 16
	bne	cr1, L(duLcr1)
	cmpld	cr5, rWORD7, rWORD8
	bne	cr6, L(duLcr6)
	sldi.	rN, rN, 3
	bne	cr5, L(duLcr5)
	cmpld	cr7, rN, rSHR
	beq	L(duZeroReturn)
	li	rA, 0
	ble	cr7, L(dutrim)
	ld	rWORD2, 8(rSTR2)
	srd	rA, rWORD2, rSHR
	b	L(dutrim)
	
/* Count is a multiple of 32, remainder is 0 */
	.align 4
L(duP4):
	mtctr   rTMP	/* Power4 wants mtctr 1st in dispatch group */
	srd	rA, rWORD8, rSHR
	ld	rWORD1, 0(rSTR1)
	sld	rD, rWORD8, rSHL
	or	rWORD2, rA, rH
L(duP4e):
	ld	rWORD3, 8(rSTR1)
	ld	rWORD4, 8(rSTR2)
	cmpld	cr0, rWORD1, rWORD2
	srd	rC, rWORD4, rSHR
	sld	rF, rWORD4, rSHL
	or	rWORD4, rC, rD
	ld	rWORD5, 16(rSTR1)
	ld	rWORD6, 16(rSTR2)
	cmpld	cr1, rWORD3, rWORD4
	bne	cr0, L(duLcr0)
	srd	rE, rWORD6, rSHR
	sld	rH, rWORD6, rSHL
	or	rWORD6, rE, rF
	ldu	rWORD7, 24(rSTR1)
	ldu	rWORD8, 24(rSTR2)
	cmpld	cr6, rWORD5, rWORD6
	bne	cr1, L(duLcr1)
	srd	rG, rWORD8, rSHR
	sld	rB, rWORD8, rSHL
	or	rWORD8, rG, rH
	cmpld	cr5, rWORD7, rWORD8
	bdz-	L(du24)		/* Adjust CTR as we start with +4 */
/* This is the primary loop */
	.align 4
L(duLoop):
	ld	rWORD1, 8(rSTR1)
	ld	rWORD2, 8(rSTR2)
	cmpld	cr1, rWORD3, rWORD4
	bne	cr6, L(duLcr6)
	srd	rA, rWORD2, rSHR
	sld	rD, rWORD2, rSHL
	or	rWORD2, rA, rB
L(duLoop1):
	ld	rWORD3, 16(rSTR1)
	ld	rWORD4, 16(rSTR2)
	cmpld	cr6, rWORD5, rWORD6
	bne	cr5, L(duLcr5)
	srd	rC, rWORD4, rSHR
	sld	rF, rWORD4, rSHL
	or	rWORD4, rC, rD
L(duLoop2):
	ld	rWORD5, 24(rSTR1)
	ld	rWORD6, 24(rSTR2)
	cmpld	cr5, rWORD7, rWORD8
	bne	cr0, L(duLcr0)
	srd	rE, rWORD6, rSHR
	sld	rH, rWORD6, rSHL
	or	rWORD6, rE, rF
L(duLoop3):
	ldu	rWORD7, 32(rSTR1)
	ldu	rWORD8, 32(rSTR2)
	cmpld	cr0, rWORD1, rWORD2
	bne-	cr1, L(duLcr1)
	srd	rG, rWORD8, rSHR
	sld	rB, rWORD8, rSHL
	or	rWORD8, rG, rH
	bdnz+	L(duLoop)	
	
L(duL4):
	bne	cr1, L(duLcr1)
	cmpld	cr1, rWORD3, rWORD4
	bne	cr6, L(duLcr6)
	cmpld	cr6, rWORD5, rWORD6
	bne	cr5, L(duLcr5)
	cmpld	cr5, rWORD7, rWORD8
L(du44):
	bne	cr0, L(duLcr0)
L(du34):
	bne	cr1, L(duLcr1)
L(du24):
	bne	cr6, L(duLcr6)
L(du14):
	sldi.	rN, rN, 3
	bne	cr5, L(duLcr5)
/* At this point we have a remainder of 1 to 7 bytes to compare.  We use
   shift right double to elliminate bits beyond the compare length. 
   This allows the use of double word subtract to compute the final
   result.

   However it may not be safe to load rWORD2 which may be beyond the 
   string length. So we compare the bit length of the remainder to
   the right shift count (rSHR). If the bit count is less than or equal
   we do not need to load rWORD2 (all significant bits are already in
   rB).  */
	cmpld	cr7, rN, rSHR
	beq	L(duZeroReturn)
	li	rA, 0
	ble	cr7, L(dutrim)
	ld	rWORD2, 8(rSTR2)
	srd	rA, rWORD2, rSHR
	.align 4
L(dutrim):
	ld	rWORD1, 8(rSTR1)
	ld	rWORD8,-8(r1)
	subfic	rN, rN, 64	/* Shift count is 64 - (rN * 8).  */ 
	or	rWORD2, rA, rB
	ld	rWORD7,-16(r1)	
	ld	r29,-24(r1)
	srd	rWORD1, rWORD1, rN
	srd	rWORD2, rWORD2, rN
	ld	r28,-32(r1)	
	ld	r27,-40(r1)
	li	rRTN, 0
	cmpld	cr0, rWORD1, rWORD2	
	ld	r26,-48(r1)
	ld	r25,-56(r1)
 	beq	cr0, L(dureturn24)
	li	rRTN, 1
	ld	r24,-64(r1)
	bgtlr	cr0
	li	rRTN, -1
	blr
	.align 4
L(duLcr0):
	ld	rWORD8,-8(r1)
	ld	rWORD7,-16(r1)
	li	rRTN, 1
	bgt	cr0, L(dureturn29)	
	ld	r29,-24(r1)
	ld	r28,-32(r1)
	li	rRTN, -1
	b	L(dureturn27)
	.align 4
L(duLcr1):
	ld	rWORD8,-8(r1)
	ld	rWORD7,-16(r1)
	li	rRTN, 1
	bgt	cr1, L(dureturn29)	
	ld	r29,-24(r1)
	ld	r28,-32(r1)
	li	rRTN, -1
	b	L(dureturn27)
	.align 4
L(duLcr6):
	ld	rWORD8,-8(r1)
	ld	rWORD7,-16(r1)
	li	rRTN, 1
	bgt	cr6, L(dureturn29)	
	ld	r29,-24(r1)
	ld	r28,-32(r1)
	li	rRTN, -1
	b	L(dureturn27)
	.align 4
L(duLcr5):
	ld	rWORD8,-8(r1)
	ld	rWORD7,-16(r1)
	li	rRTN, 1
	bgt	cr5, L(dureturn29)	
	ld	r29,-24(r1)
	ld	r28,-32(r1)
	li	rRTN, -1
	b	L(dureturn27)
	.align	3
L(duZeroReturn):
	li	rRTN,0
	.align	4
L(dureturn):
	ld	rWORD8,-8(r1)
	ld	rWORD7,-16(r1)
L(dureturn29):	
	ld	r29,-24(r1)
	ld	r28,-32(r1)
L(dureturn27):	
	ld	r27,-40(r1)
L(dureturn26):	
	ld	r26,-48(r1)
L(dureturn25):	
	ld	r25,-56(r1)
L(dureturn24):
	ld	r24,-64(r1)
	blr
L(duzeroLength):
	li	rRTN,0
	blr

END (BP_SYM (memcmp))
libc_hidden_builtin_def (memcmp)
weak_alias (memcmp, bcmp)