drivers/net/wireless/ath/ath9k/ar9003_wow.c - nest-cam/v366/kernel_backports - Git at Google

 /*
  * Copyright (c) 2012 Qualcomm Atheros, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
  * copyright notice and this permission notice appear in all copies.
  *
  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */

 #include <linux/export.h>
 #include "ath9k.h"
 #include "reg.h"
 #include "hw-ops.h"

 const char *ath9k_hw_wow_event_to_string(u32 wow_event)
 {
 	if (wow_event & AH_WOW_MAGIC_PATTERN_EN)
 		return "Magic pattern";
 	if (wow_event & AH_WOW_USER_PATTERN_EN)
 		return "User pattern";
 	if (wow_event & AH_WOW_LINK_CHANGE)
 		return "Link change";
 	if (wow_event & AH_WOW_BEACON_MISS)
 		return "Beacon miss";

 	return  "unknown reason";
 }
 EXPORT_SYMBOL(ath9k_hw_wow_event_to_string);

 static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah)
 {
 	struct ath_common *common = ath9k_hw_common(ah);

 	REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);

 	/* set rx disable bit */
 	REG_WRITE(ah, AR_CR, AR_CR_RXD);

 	if (!ath9k_hw_wait(ah, AR_CR, AR_CR_RXE, 0, AH_WAIT_TIMEOUT)) {
 		ath_err(common, "Failed to stop Rx DMA in 10ms AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
 			REG_READ(ah, AR_CR), REG_READ(ah, AR_DIAG_SW));
 		return;
 	}

 	REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_ON_INT);
 }

 static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
 	u8 sta_mac_addr[ETH_ALEN], ap_mac_addr[ETH_ALEN];
 	u32 ctl[13] = {0};
 	u32 data_word[KAL_NUM_DATA_WORDS];
 	u8 i;
 	u32 wow_ka_data_word0;

 	memcpy(sta_mac_addr, common->macaddr, ETH_ALEN);
 	memcpy(ap_mac_addr, common->curbssid, ETH_ALEN);

 	/* set the transmit buffer */
 	ctl[0] = (KAL_FRAME_LEN | (MAX_RATE_POWER << 16));
 	ctl[1] = 0;
 	ctl[3] = 0xb;	/* OFDM_6M hardware value for this rate */
 	ctl[4] = 0;
 	ctl[7] = (ah->txchainmask) << 2;
 	ctl[2] = 0xf << 16; /* tx_tries 0 */

 	for (i = 0; i < KAL_NUM_DESC_WORDS; i++)
 		REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);

 	REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);

 	data_word[0] = (KAL_FRAME_TYPE << 2) | (KAL_FRAME_SUB_TYPE << 4) |
 		       (KAL_TO_DS << 8) | (KAL_DURATION_ID << 16);
 	data_word[1] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
 		       (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
 	data_word[2] = (sta_mac_addr[1] << 24) | (sta_mac_addr[0] << 16) |
 		       (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
 	data_word[3] = (sta_mac_addr[5] << 24) | (sta_mac_addr[4] << 16) |
 		       (sta_mac_addr[3] << 8) | (sta_mac_addr[2]);
 	data_word[4] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
 		       (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
 	data_word[5] = (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);

 	if (AR_SREV_9462_20(ah)) {
 		/* AR9462 2.0 has an extra descriptor word (time based
 		 * discard) compared to other chips */
 		REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + (12 * 4)), 0);
 		wow_ka_data_word0 = AR_WOW_TXBUF(13);
 	} else {
 		wow_ka_data_word0 = AR_WOW_TXBUF(12);
 	}

 	for (i = 0; i < KAL_NUM_DATA_WORDS; i++)
 		REG_WRITE(ah, (wow_ka_data_word0 + i*4), data_word[i]);

 }

 void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
 				u8 *user_mask, int pattern_count,
 				int pattern_len)
 {
 	int i;
 	u32 pattern_val, mask_val;
 	u32 set, clr;

 	/* FIXME: should check count by querying the hardware capability */
 	if (pattern_count >= MAX_NUM_PATTERN)
 		return;

 	REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count));

 	/* set the registers for pattern */
 	for (i = 0; i < MAX_PATTERN_SIZE; i += 4) {
 		memcpy(&pattern_val, user_pattern, 4);
 		REG_WRITE(ah, (AR_WOW_TB_PATTERN(pattern_count) + i),
 			  pattern_val);
 		user_pattern += 4;
 	}

 	/* set the registers for mask */
 	for (i = 0; i < MAX_PATTERN_MASK_SIZE; i += 4) {
 		memcpy(&mask_val, user_mask, 4);
 		REG_WRITE(ah, (AR_WOW_TB_MASK(pattern_count) + i), mask_val);
 		user_mask += 4;
 	}

 	/* set the pattern length to be matched
 	 *
 	 * AR_WOW_LENGTH1_REG1
 	 * bit 31:24 pattern 0 length
 	 * bit 23:16 pattern 1 length
 	 * bit 15:8 pattern 2 length
 	 * bit 7:0 pattern 3 length
 	 *
 	 * AR_WOW_LENGTH1_REG2
 	 * bit 31:24 pattern 4 length
 	 * bit 23:16 pattern 5 length
 	 * bit 15:8 pattern 6 length
 	 * bit 7:0 pattern 7 length
 	 *
 	 * the below logic writes out the new
 	 * pattern length for the corresponding
 	 * pattern_count, while masking out the
 	 * other fields
 	 */

 	ah->wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);

 	if (pattern_count < 4) {
 		/* Pattern 0-3 uses AR_WOW_LENGTH1 register */
 		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
 		       AR_WOW_LEN1_SHIFT(pattern_count);
 		clr = AR_WOW_LENGTH1_MASK(pattern_count);
 		REG_RMW(ah, AR_WOW_LENGTH1, set, clr);
 	} else {
 		/* Pattern 4-7 uses AR_WOW_LENGTH2 register */
 		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
 		       AR_WOW_LEN2_SHIFT(pattern_count);
 		clr = AR_WOW_LENGTH2_MASK(pattern_count);
 		REG_RMW(ah, AR_WOW_LENGTH2, set, clr);
 	}

 }
 EXPORT_SYMBOL(ath9k_hw_wow_apply_pattern);

 u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
 {
 	u32 wow_status = 0;
 	u32 val = 0, rval;

 	/*
 	 * read the WoW status register to know
 	 * the wakeup reason
 	 */
 	rval = REG_READ(ah, AR_WOW_PATTERN);
 	val = AR_WOW_STATUS(rval);

 	/*
 	 * mask only the WoW events that we have enabled. Sometimes
 	 * we have spurious WoW events from the AR_WOW_PATTERN
 	 * register. This mask will clean it up.
 	 */

 	val &= ah->wow_event_mask;

 	if (val) {
 		if (val & AR_WOW_MAGIC_PAT_FOUND)
 			wow_status |= AH_WOW_MAGIC_PATTERN_EN;
 		if (AR_WOW_PATTERN_FOUND(val))
 			wow_status |= AH_WOW_USER_PATTERN_EN;
 		if (val & AR_WOW_KEEP_ALIVE_FAIL)
 			wow_status |= AH_WOW_LINK_CHANGE;
 		if (val & AR_WOW_BEACON_FAIL)
 			wow_status |= AH_WOW_BEACON_MISS;
 	}

 	/*
 	 * set and clear WOW_PME_CLEAR registers for the chip to
 	 * generate next wow signal.
 	 * disable D3 before accessing other registers ?
 	 */

 	/* do we need to check the bit value 0x01000000 (7-10) ?? */
 	REG_RMW(ah, AR_PCIE_PM_CTRL, AR_PMCTRL_WOW_PME_CLR,
 		AR_PMCTRL_PWR_STATE_D1D3);

 	/*
 	 * clear all events
 	 */
 	REG_WRITE(ah, AR_WOW_PATTERN,
 		  AR_WOW_CLEAR_EVENTS(REG_READ(ah, AR_WOW_PATTERN)));

 	/*
 	 * restore the beacon threshold to init value
 	 */
 	REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);

 	/*
 	 * Restore the way the PCI-E reset, Power-On-Reset, external
 	 * PCIE_POR_SHORT pins are tied to its original value.
 	 * Previously just before WoW sleep, we untie the PCI-E
 	 * reset to our Chip's Power On Reset so that any PCI-E
 	 * reset from the bus will not reset our chip
 	 */
 	if (ah->is_pciexpress)
 		ath9k_hw_configpcipowersave(ah, false);

 	ah->wow_event_mask = 0;

 	return wow_status;
 }
 EXPORT_SYMBOL(ath9k_hw_wow_wakeup);

 void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
 {
 	u32 wow_event_mask;
 	u32 set, clr;

 	/*
 	 * wow_event_mask is a mask to the AR_WOW_PATTERN register to
 	 * indicate which WoW events we have enabled. The WoW events
 	 * are from the 'pattern_enable' in this function and
 	 * 'pattern_count' of ath9k_hw_wow_apply_pattern()
 	 */
 	wow_event_mask = ah->wow_event_mask;

 	/*
 	 * Untie Power-on-Reset from the PCI-E-Reset. When we are in
 	 * WOW sleep, we do want the Reset from the PCI-E to disturb
 	 * our hw state
 	 */
 	if (ah->is_pciexpress) {
 		/*
 		 * we need to untie the internal POR (power-on-reset)
 		 * to the external PCI-E reset. We also need to tie
 		 * the PCI-E Phy reset to the PCI-E reset.
 		 */
 		set = AR_WA_RESET_EN | AR_WA_POR_SHORT;
 		clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE;
 		REG_RMW(ah, AR_WA, set, clr);
 	}

 	/*
 	 * set the power states appropriately and enable PME
 	 */
 	set = AR_PMCTRL_HOST_PME_EN | AR_PMCTRL_PWR_PM_CTRL_ENA |
 	      AR_PMCTRL_AUX_PWR_DET | AR_PMCTRL_WOW_PME_CLR;

 	/*
 	 * set and clear WOW_PME_CLEAR registers for the chip
 	 * to generate next wow signal.
 	 */
 	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
 	clr = AR_PMCTRL_WOW_PME_CLR;
 	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);

 	/*
 	 * Setup for:
 	 *	- beacon misses
 	 *	- magic pattern
 	 *	- keep alive timeout
 	 *	- pattern matching
 	 */

 	/*
 	 * Program default values for pattern backoff, aifs/slot/KAL count,
 	 * beacon miss timeout, KAL timeout, etc.
 	 */
 	set = AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF);
 	REG_SET_BIT(ah, AR_WOW_PATTERN, set);

 	set = AR_WOW_AIFS_CNT(AR_WOW_CNT_AIFS_CNT) |
 	      AR_WOW_SLOT_CNT(AR_WOW_CNT_SLOT_CNT) |
 	      AR_WOW_KEEP_ALIVE_CNT(AR_WOW_CNT_KA_CNT);
 	REG_SET_BIT(ah, AR_WOW_COUNT, set);

 	if (pattern_enable & AH_WOW_BEACON_MISS)
 		set = AR_WOW_BEACON_TIMO;
 	/* We are not using beacon miss, program a large value */
 	else
 		set = AR_WOW_BEACON_TIMO_MAX;

 	REG_WRITE(ah, AR_WOW_BCN_TIMO, set);

 	/*
 	 * Keep alive timo in ms except AR9280
 	 */
 	if (!pattern_enable)
 		set = AR_WOW_KEEP_ALIVE_NEVER;
 	else
 		set = KAL_TIMEOUT * 32;

 	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, set);

 	/*
 	 * Keep alive delay in us. based on 'power on clock',
 	 * therefore in usec
 	 */
 	set = KAL_DELAY * 1000;
 	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_DELAY, set);

 	/*
 	 * Create keep alive pattern to respond to beacons
 	 */
 	ath9k_wow_create_keep_alive_pattern(ah);

 	/*
 	 * Configure MAC WoW Registers
 	 */
 	set = 0;
 	/* Send keep alive timeouts anyway */
 	clr = AR_WOW_KEEP_ALIVE_AUTO_DIS;

 	if (pattern_enable & AH_WOW_LINK_CHANGE)
 		wow_event_mask |= AR_WOW_KEEP_ALIVE_FAIL;
 	else
 		set = AR_WOW_KEEP_ALIVE_FAIL_DIS;

 	set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
 	REG_RMW(ah, AR_WOW_KEEP_ALIVE, set, clr);

 	/*
 	 * we are relying on a bmiss failure. ensure we have
 	 * enough threshold to prevent false positives
 	 */
 	REG_RMW_FIELD(ah, AR_RSSI_THR, AR_RSSI_THR_BM_THR,
 		      AR_WOW_BMISSTHRESHOLD);

 	set = 0;
 	clr = 0;

 	if (pattern_enable & AH_WOW_BEACON_MISS) {
 		set = AR_WOW_BEACON_FAIL_EN;
 		wow_event_mask |= AR_WOW_BEACON_FAIL;
 	} else {
 		clr = AR_WOW_BEACON_FAIL_EN;
 	}

 	REG_RMW(ah, AR_WOW_BCN_EN, set, clr);

 	set = 0;
 	clr = 0;
 	/*
 	 * Enable the magic packet registers
 	 */
 	if (pattern_enable & AH_WOW_MAGIC_PATTERN_EN) {
 		set = AR_WOW_MAGIC_EN;
 		wow_event_mask |= AR_WOW_MAGIC_PAT_FOUND;
 	} else {
 		clr = AR_WOW_MAGIC_EN;
 	}
 	set |= AR_WOW_MAC_INTR_EN;
 	REG_RMW(ah, AR_WOW_PATTERN, set, clr);

 	REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B,
 		  AR_WOW_PATTERN_SUPPORTED);

 	/*
 	 * Set the power states appropriately and enable PME
 	 */
 	clr = 0;
 	set = AR_PMCTRL_PWR_STATE_D1D3 | AR_PMCTRL_HOST_PME_EN |
 	      AR_PMCTRL_PWR_PM_CTRL_ENA;

 	clr = AR_PCIE_PM_CTRL_ENA;
 	REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr);

 	/*
 	 * this is needed to prevent the chip waking up
 	 * the host within 3-4 seconds with certain
 	 * platform/BIOS. The fix is to enable
 	 * D1 & D3 to match original definition and
 	 * also match the OTP value. Anyway this
 	 * is more related to SW WOW.
 	 */
 	clr = AR_PMCTRL_PWR_STATE_D1D3;
 	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);

 	set = AR_PMCTRL_PWR_STATE_D1D3_REAL;
 	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);

 	REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);

 	/* to bring down WOW power low margin */
 	set = BIT(13);
 	REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set);
 	/* HW WoW */
 	clr = BIT(5);
 	REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr);

 	ath9k_hw_set_powermode_wow_sleep(ah);
 	ah->wow_event_mask = wow_event_mask;
 }
 EXPORT_SYMBOL(ath9k_hw_wow_enable);
	/*
	* Copyright (c) 2012 Qualcomm Atheros, Inc.
	*
	* Permission to use, copy, modify, and/or distribute this software for any
	* purpose with or without fee is hereby granted, provided that the above
	* copyright notice and this permission notice appear in all copies.
	*
	* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
	* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
	* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
	* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
	* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
	* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
	*/

	#include <linux/export.h>
	#include "ath9k.h"
	#include "reg.h"
	#include "hw-ops.h"

	const char *ath9k_hw_wow_event_to_string(u32 wow_event)
	{
	if (wow_event & AH_WOW_MAGIC_PATTERN_EN)
	return "Magic pattern";
	if (wow_event & AH_WOW_USER_PATTERN_EN)
	return "User pattern";
	if (wow_event & AH_WOW_LINK_CHANGE)
	return "Link change";
	if (wow_event & AH_WOW_BEACON_MISS)
	return "Beacon miss";

	return "unknown reason";
	}
	EXPORT_SYMBOL(ath9k_hw_wow_event_to_string);

	static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah)
	{
	struct ath_common *common = ath9k_hw_common(ah);

	REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);

	/* set rx disable bit */
	REG_WRITE(ah, AR_CR, AR_CR_RXD);

	if (!ath9k_hw_wait(ah, AR_CR, AR_CR_RXE, 0, AH_WAIT_TIMEOUT)) {
	ath_err(common, "Failed to stop Rx DMA in 10ms AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
	REG_READ(ah, AR_CR), REG_READ(ah, AR_DIAG_SW));
	return;
	}

	REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_ON_INT);
	}

	static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah)
	{
	struct ath_common *common = ath9k_hw_common(ah);
	u8 sta_mac_addr[ETH_ALEN], ap_mac_addr[ETH_ALEN];
	u32 ctl[13] = {0};
	u32 data_word[KAL_NUM_DATA_WORDS];
	u8 i;
	u32 wow_ka_data_word0;

	memcpy(sta_mac_addr, common->macaddr, ETH_ALEN);
	memcpy(ap_mac_addr, common->curbssid, ETH_ALEN);

	/* set the transmit buffer */
	ctl[0] = (KAL_FRAME_LEN \| (MAX_RATE_POWER << 16));
	ctl[1] = 0;
	ctl[3] = 0xb; /* OFDM_6M hardware value for this rate */
	ctl[4] = 0;
	ctl[7] = (ah->txchainmask) << 2;
	ctl[2] = 0xf << 16; /* tx_tries 0 */

	for (i = 0; i < KAL_NUM_DESC_WORDS; i++)
	REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);

	REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);

	data_word[0] = (KAL_FRAME_TYPE << 2) \| (KAL_FRAME_SUB_TYPE << 4) \|
	(KAL_TO_DS << 8) \| (KAL_DURATION_ID << 16);
	data_word[1] = (ap_mac_addr[3] << 24) \| (ap_mac_addr[2] << 16) \|
	(ap_mac_addr[1] << 8) \| (ap_mac_addr[0]);
	data_word[2] = (sta_mac_addr[1] << 24) \| (sta_mac_addr[0] << 16) \|
	(ap_mac_addr[5] << 8) \| (ap_mac_addr[4]);
	data_word[3] = (sta_mac_addr[5] << 24) \| (sta_mac_addr[4] << 16) \|
	(sta_mac_addr[3] << 8) \| (sta_mac_addr[2]);
	data_word[4] = (ap_mac_addr[3] << 24) \| (ap_mac_addr[2] << 16) \|
	(ap_mac_addr[1] << 8) \| (ap_mac_addr[0]);
	data_word[5] = (ap_mac_addr[5] << 8) \| (ap_mac_addr[4]);

	if (AR_SREV_9462_20(ah)) {
	/* AR9462 2.0 has an extra descriptor word (time based
	* discard) compared to other chips */
	REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + (12 * 4)), 0);
	wow_ka_data_word0 = AR_WOW_TXBUF(13);
	} else {
	wow_ka_data_word0 = AR_WOW_TXBUF(12);
	}

	for (i = 0; i < KAL_NUM_DATA_WORDS; i++)
	REG_WRITE(ah, (wow_ka_data_word0 + i*4), data_word[i]);

	}

	void ath9k_hw_wow_apply_pattern(struct ath_hw ah, u8 user_pattern,
	u8 *user_mask, int pattern_count,
	int pattern_len)
	{
	int i;
	u32 pattern_val, mask_val;
	u32 set, clr;

	/* FIXME: should check count by querying the hardware capability */
	if (pattern_count >= MAX_NUM_PATTERN)
	return;

	REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count));

	/* set the registers for pattern */
	for (i = 0; i < MAX_PATTERN_SIZE; i += 4) {
	memcpy(&pattern_val, user_pattern, 4);
	REG_WRITE(ah, (AR_WOW_TB_PATTERN(pattern_count) + i),
	pattern_val);
	user_pattern += 4;
	}

	/* set the registers for mask */
	for (i = 0; i < MAX_PATTERN_MASK_SIZE; i += 4) {
	memcpy(&mask_val, user_mask, 4);
	REG_WRITE(ah, (AR_WOW_TB_MASK(pattern_count) + i), mask_val);
	user_mask += 4;
	}

	/* set the pattern length to be matched
	*
	* AR_WOW_LENGTH1_REG1
	* bit 31:24 pattern 0 length
	* bit 23:16 pattern 1 length
	* bit 15:8 pattern 2 length
	* bit 7:0 pattern 3 length
	*
	* AR_WOW_LENGTH1_REG2
	* bit 31:24 pattern 4 length
	* bit 23:16 pattern 5 length
	* bit 15:8 pattern 6 length
	* bit 7:0 pattern 7 length
	*
	* the below logic writes out the new
	* pattern length for the corresponding
	* pattern_count, while masking out the
	* other fields
	*/

	ah->wow_event_mask \|= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);

	if (pattern_count < 4) {
	/* Pattern 0-3 uses AR_WOW_LENGTH1 register */
	set = (pattern_len & AR_WOW_LENGTH_MAX) <<
	AR_WOW_LEN1_SHIFT(pattern_count);
	clr = AR_WOW_LENGTH1_MASK(pattern_count);
	REG_RMW(ah, AR_WOW_LENGTH1, set, clr);
	} else {
	/* Pattern 4-7 uses AR_WOW_LENGTH2 register */
	set = (pattern_len & AR_WOW_LENGTH_MAX) <<
	AR_WOW_LEN2_SHIFT(pattern_count);
	clr = AR_WOW_LENGTH2_MASK(pattern_count);
	REG_RMW(ah, AR_WOW_LENGTH2, set, clr);
	}

	}
	EXPORT_SYMBOL(ath9k_hw_wow_apply_pattern);

	u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
	{
	u32 wow_status = 0;
	u32 val = 0, rval;

	/*
	* read the WoW status register to know
	* the wakeup reason
	*/
	rval = REG_READ(ah, AR_WOW_PATTERN);
	val = AR_WOW_STATUS(rval);

	/*
	* mask only the WoW events that we have enabled. Sometimes
	* we have spurious WoW events from the AR_WOW_PATTERN
	* register. This mask will clean it up.
	*/

	val &= ah->wow_event_mask;

	if (val) {
	if (val & AR_WOW_MAGIC_PAT_FOUND)
	wow_status \|= AH_WOW_MAGIC_PATTERN_EN;
	if (AR_WOW_PATTERN_FOUND(val))
	wow_status \|= AH_WOW_USER_PATTERN_EN;
	if (val & AR_WOW_KEEP_ALIVE_FAIL)
	wow_status \|= AH_WOW_LINK_CHANGE;
	if (val & AR_WOW_BEACON_FAIL)
	wow_status \|= AH_WOW_BEACON_MISS;
	}

	/*
	* set and clear WOW_PME_CLEAR registers for the chip to
	* generate next wow signal.
	* disable D3 before accessing other registers ?
	*/

	/* do we need to check the bit value 0x01000000 (7-10) ?? */
	REG_RMW(ah, AR_PCIE_PM_CTRL, AR_PMCTRL_WOW_PME_CLR,
	AR_PMCTRL_PWR_STATE_D1D3);

	/*
	* clear all events
	*/
	REG_WRITE(ah, AR_WOW_PATTERN,
	AR_WOW_CLEAR_EVENTS(REG_READ(ah, AR_WOW_PATTERN)));

	/*
	* restore the beacon threshold to init value
	*/
	REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);

	/*
	* Restore the way the PCI-E reset, Power-On-Reset, external
	* PCIE_POR_SHORT pins are tied to its original value.
	* Previously just before WoW sleep, we untie the PCI-E
	* reset to our Chip's Power On Reset so that any PCI-E
	* reset from the bus will not reset our chip
	*/
	if (ah->is_pciexpress)
	ath9k_hw_configpcipowersave(ah, false);

	ah->wow_event_mask = 0;

	return wow_status;
	}
	EXPORT_SYMBOL(ath9k_hw_wow_wakeup);

	void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
	{
	u32 wow_event_mask;
	u32 set, clr;

	/*
	* wow_event_mask is a mask to the AR_WOW_PATTERN register to
	* indicate which WoW events we have enabled. The WoW events
	* are from the 'pattern_enable' in this function and
	* 'pattern_count' of ath9k_hw_wow_apply_pattern()
	*/
	wow_event_mask = ah->wow_event_mask;

	/*
	* Untie Power-on-Reset from the PCI-E-Reset. When we are in
	* WOW sleep, we do want the Reset from the PCI-E to disturb
	* our hw state
	*/
	if (ah->is_pciexpress) {
	/*
	* we need to untie the internal POR (power-on-reset)
	* to the external PCI-E reset. We also need to tie
	* the PCI-E Phy reset to the PCI-E reset.
	*/
	set = AR_WA_RESET_EN \| AR_WA_POR_SHORT;
	clr = AR_WA_UNTIE_RESET_EN \| AR_WA_D3_L1_DISABLE;
	REG_RMW(ah, AR_WA, set, clr);
	}

	/*
	* set the power states appropriately and enable PME
	*/
	set = AR_PMCTRL_HOST_PME_EN \| AR_PMCTRL_PWR_PM_CTRL_ENA \|
	AR_PMCTRL_AUX_PWR_DET \| AR_PMCTRL_WOW_PME_CLR;

	/*
	* set and clear WOW_PME_CLEAR registers for the chip
	* to generate next wow signal.
	*/
	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
	clr = AR_PMCTRL_WOW_PME_CLR;
	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);

	/*
	* Setup for:
	* - beacon misses
	* - magic pattern
	* - keep alive timeout
	* - pattern matching
	*/

	/*
	* Program default values for pattern backoff, aifs/slot/KAL count,
	* beacon miss timeout, KAL timeout, etc.
	*/
	set = AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF);
	REG_SET_BIT(ah, AR_WOW_PATTERN, set);

	set = AR_WOW_AIFS_CNT(AR_WOW_CNT_AIFS_CNT) \|
	AR_WOW_SLOT_CNT(AR_WOW_CNT_SLOT_CNT) \|
	AR_WOW_KEEP_ALIVE_CNT(AR_WOW_CNT_KA_CNT);
	REG_SET_BIT(ah, AR_WOW_COUNT, set);

	if (pattern_enable & AH_WOW_BEACON_MISS)
	set = AR_WOW_BEACON_TIMO;
	/* We are not using beacon miss, program a large value */
	else
	set = AR_WOW_BEACON_TIMO_MAX;

	REG_WRITE(ah, AR_WOW_BCN_TIMO, set);

	/*
	* Keep alive timo in ms except AR9280
	*/
	if (!pattern_enable)
	set = AR_WOW_KEEP_ALIVE_NEVER;
	else
	set = KAL_TIMEOUT * 32;

	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, set);

	/*
	* Keep alive delay in us. based on 'power on clock',
	* therefore in usec
	*/
	set = KAL_DELAY * 1000;
	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_DELAY, set);

	/*
	* Create keep alive pattern to respond to beacons
	*/
	ath9k_wow_create_keep_alive_pattern(ah);

	/*
	* Configure MAC WoW Registers
	*/
	set = 0;
	/* Send keep alive timeouts anyway */
	clr = AR_WOW_KEEP_ALIVE_AUTO_DIS;

	if (pattern_enable & AH_WOW_LINK_CHANGE)
	wow_event_mask \|= AR_WOW_KEEP_ALIVE_FAIL;
	else
	set = AR_WOW_KEEP_ALIVE_FAIL_DIS;

	set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
	REG_RMW(ah, AR_WOW_KEEP_ALIVE, set, clr);

	/*
	* we are relying on a bmiss failure. ensure we have
	* enough threshold to prevent false positives
	*/
	REG_RMW_FIELD(ah, AR_RSSI_THR, AR_RSSI_THR_BM_THR,
	AR_WOW_BMISSTHRESHOLD);

	set = 0;
	clr = 0;

	if (pattern_enable & AH_WOW_BEACON_MISS) {
	set = AR_WOW_BEACON_FAIL_EN;
	wow_event_mask \|= AR_WOW_BEACON_FAIL;
	} else {
	clr = AR_WOW_BEACON_FAIL_EN;
	}

	REG_RMW(ah, AR_WOW_BCN_EN, set, clr);

	set = 0;
	clr = 0;
	/*
	* Enable the magic packet registers
	*/
	if (pattern_enable & AH_WOW_MAGIC_PATTERN_EN) {
	set = AR_WOW_MAGIC_EN;
	wow_event_mask \|= AR_WOW_MAGIC_PAT_FOUND;
	} else {
	clr = AR_WOW_MAGIC_EN;
	}
	set \|= AR_WOW_MAC_INTR_EN;
	REG_RMW(ah, AR_WOW_PATTERN, set, clr);

	REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B,
	AR_WOW_PATTERN_SUPPORTED);

	/*
	* Set the power states appropriately and enable PME
	*/
	clr = 0;
	set = AR_PMCTRL_PWR_STATE_D1D3 \| AR_PMCTRL_HOST_PME_EN \|
	AR_PMCTRL_PWR_PM_CTRL_ENA;

	clr = AR_PCIE_PM_CTRL_ENA;
	REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr);

	/*
	* this is needed to prevent the chip waking up
	* the host within 3-4 seconds with certain
	* platform/BIOS. The fix is to enable
	* D1 & D3 to match original definition and
	* also match the OTP value. Anyway this
	* is more related to SW WOW.
	*/
	clr = AR_PMCTRL_PWR_STATE_D1D3;
	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);

	set = AR_PMCTRL_PWR_STATE_D1D3_REAL;
	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);

	REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);

	/* to bring down WOW power low margin */
	set = BIT(13);
	REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set);
	/* HW WoW */
	clr = BIT(5);
	REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr);

	ath9k_hw_set_powermode_wow_sleep(ah);
	ah->wow_event_mask = wow_event_mask;
	}
	EXPORT_SYMBOL(ath9k_hw_wow_enable);