blob: 7cc5aae662fda5e0ef1ed6ba0b3534fafb4378c4 [file] [log] [blame]
/*
* drivers/media/i2c/smiapp/smiapp.h
*
* Generic driver for SMIA/SMIA++ compliant camera modules
*
* Copyright (C) 2010--2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@iki.fi>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#ifndef __SMIAPP_PRIV_H_
#define __SMIAPP_PRIV_H_
#include <linux/mutex.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-subdev.h>
#include <media/smiapp.h>
#include "smiapp-pll.h"
#include "smiapp-reg.h"
#include "smiapp-regs.h"
#include "smiapp-quirk.h"
/*
* Standard SMIA++ constants
*/
#define SMIA_VERSION_1 10
#define SMIAPP_VERSION_0_8 8 /* Draft 0.8 */
#define SMIAPP_VERSION_0_9 9 /* Draft 0.9 */
#define SMIAPP_VERSION_1 10
#define SMIAPP_PROFILE_0 0
#define SMIAPP_PROFILE_1 1
#define SMIAPP_PROFILE_2 2
#define SMIAPP_NVM_PAGE_SIZE 64 /* bytes */
#define SMIAPP_RESET_DELAY_CLOCKS 2400
#define SMIAPP_RESET_DELAY(clk) \
(1000 + (SMIAPP_RESET_DELAY_CLOCKS * 1000 \
+ (clk) / 1000 - 1) / ((clk) / 1000))
#include "smiapp-limits.h"
struct smiapp_quirk;
#define SMIAPP_MODULE_IDENT_FLAG_REV_LE (1 << 0)
struct smiapp_module_ident {
u8 manufacturer_id;
u16 model_id;
u8 revision_number_major;
u8 flags;
char *name;
const struct smiapp_quirk *quirk;
};
struct smiapp_module_info {
u32 manufacturer_id;
u32 model_id;
u32 revision_number_major;
u32 revision_number_minor;
u32 module_year;
u32 module_month;
u32 module_day;
u32 sensor_manufacturer_id;
u32 sensor_model_id;
u32 sensor_revision_number;
u32 sensor_firmware_version;
u32 smia_version;
u32 smiapp_version;
u32 smiapp_profile;
char *name;
const struct smiapp_quirk *quirk;
};
#define SMIAPP_IDENT_FQ(manufacturer, model, rev, fl, _name, _quirk) \
{ .manufacturer_id = manufacturer, \
.model_id = model, \
.revision_number_major = rev, \
.flags = fl, \
.name = _name, \
.quirk = _quirk, }
#define SMIAPP_IDENT_LQ(manufacturer, model, rev, _name, _quirk) \
{ .manufacturer_id = manufacturer, \
.model_id = model, \
.revision_number_major = rev, \
.flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE, \
.name = _name, \
.quirk = _quirk, }
#define SMIAPP_IDENT_L(manufacturer, model, rev, _name) \
{ .manufacturer_id = manufacturer, \
.model_id = model, \
.revision_number_major = rev, \
.flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE, \
.name = _name, }
#define SMIAPP_IDENT_Q(manufacturer, model, rev, _name, _quirk) \
{ .manufacturer_id = manufacturer, \
.model_id = model, \
.revision_number_major = rev, \
.flags = 0, \
.name = _name, \
.quirk = _quirk, }
#define SMIAPP_IDENT(manufacturer, model, rev, _name) \
{ .manufacturer_id = manufacturer, \
.model_id = model, \
.revision_number_major = rev, \
.flags = 0, \
.name = _name, }
struct smiapp_reg_limits {
u32 addr;
char *what;
};
extern struct smiapp_reg_limits smiapp_reg_limits[];
struct smiapp_csi_data_format {
u32 code;
u8 width;
u8 compressed;
u8 pixel_order;
};
#define SMIAPP_SUBDEVS 3
#define SMIAPP_PA_PAD_SRC 0
#define SMIAPP_PAD_SINK 0
#define SMIAPP_PAD_SRC 1
#define SMIAPP_PADS 2
struct smiapp_binning_subtype {
u8 horizontal:4;
u8 vertical:4;
} __packed;
struct smiapp_subdev {
struct v4l2_subdev sd;
struct media_pad pads[2];
struct v4l2_rect sink_fmt;
struct v4l2_rect crop[2];
struct v4l2_rect compose; /* compose on sink */
unsigned short sink_pad;
unsigned short source_pad;
int npads;
struct smiapp_sensor *sensor;
struct v4l2_ctrl_handler ctrl_handler;
};
/*
* struct smiapp_sensor - Main device structure
*/
struct smiapp_sensor {
/*
* "mutex" is used to serialise access to all fields here
* except v4l2_ctrls at the end of the struct. "mutex" is also
* used to serialise access to file handle specific
* information. The exception to this rule is the power_mutex
* below.
*/
struct mutex mutex;
/*
* power_mutex is used to serialise power management related
* activities. Acquiring "mutex" at that time isn't necessary
* since there are no other users anyway.
*/
struct mutex power_mutex;
struct smiapp_subdev ssds[SMIAPP_SUBDEVS];
u32 ssds_used;
struct smiapp_subdev *src;
struct smiapp_subdev *binner;
struct smiapp_subdev *scaler;
struct smiapp_subdev *pixel_array;
struct smiapp_platform_data *platform_data;
struct regulator *vana;
struct clk *ext_clk;
u32 limits[SMIAPP_LIMIT_LAST];
u8 nbinning_subtypes;
struct smiapp_binning_subtype binning_subtypes[SMIAPP_BINNING_SUBTYPES];
u32 mbus_frame_fmts;
const struct smiapp_csi_data_format *csi_format;
const struct smiapp_csi_data_format *internal_csi_format;
u32 default_mbus_frame_fmts;
int default_pixel_order;
u8 binning_horizontal;
u8 binning_vertical;
u8 scale_m;
u8 scaling_mode;
u8 hvflip_inv_mask; /* H/VFLIP inversion due to sensor orientation */
u8 flash_capability;
u8 frame_skip;
int power_count;
bool streaming;
bool dev_init_done;
u8 *nvm; /* nvm memory buffer */
unsigned int nvm_size; /* bytes */
struct smiapp_module_info minfo;
struct smiapp_pll pll;
/* Pixel array controls */
struct v4l2_ctrl *analog_gain;
struct v4l2_ctrl *exposure;
struct v4l2_ctrl *hflip;
struct v4l2_ctrl *vflip;
struct v4l2_ctrl *vblank;
struct v4l2_ctrl *hblank;
struct v4l2_ctrl *pixel_rate_parray;
/* src controls */
struct v4l2_ctrl *link_freq;
struct v4l2_ctrl *pixel_rate_csi;
};
#define to_smiapp_subdev(_sd) \
container_of(_sd, struct smiapp_subdev, sd)
#define to_smiapp_sensor(_sd) \
(to_smiapp_subdev(_sd)->sensor)
#endif /* __SMIAPP_PRIV_H_ */