blob: ff06b738bb88065b28f6006c7a6381d5af7d57dd [file] [log] [blame]
Per-task statistics interface
Taskstats is a netlink-based interface for sending per-task and
per-process statistics from the kernel to userspace.
Taskstats was designed for the following benefits:
- efficiently provide statistics during lifetime of a task and on its exit
- unified interface for multiple accounting subsystems
- extensibility for use by future accounting patches
"pid", "tid" and "task" are used interchangeably and refer to the standard
Linux task defined by struct task_struct. per-pid stats are the same as
per-task stats.
"tgid", "process" and "thread group" are used interchangeably and refer to the
tasks that share an mm_struct i.e. the traditional Unix process. Despite the
use of tgid, there is no special treatment for the task that is thread group
leader - a process is deemed alive as long as it has any task belonging to it.
To get statistics during a task's lifetime, userspace opens a unicast netlink
socket (NETLINK_GENERIC family) and sends commands specifying a pid or a tgid.
The response contains statistics for a task (if pid is specified) or the sum of
statistics for all tasks of the process (if tgid is specified).
To obtain statistics for tasks which are exiting, the userspace listener
sends a register command and specifies a cpumask. Whenever a task exits on
one of the cpus in the cpumask, its per-pid statistics are sent to the
registered listener. Using cpumasks allows the data received by one listener
to be limited and assists in flow control over the netlink interface and is
explained in more detail below.
If the exiting task is the last thread exiting its thread group,
an additional record containing the per-tgid stats is also sent to userspace.
The latter contains the sum of per-pid stats for all threads in the thread
group, both past and present.
getdelays.c is a simple utility demonstrating usage of the taskstats interface
for reporting delay accounting statistics. Users can register cpumasks,
send commands and process responses, listen for per-tid/tgid exit data,
write the data received to a file and do basic flow control by increasing
receive buffer sizes.
The user-kernel interface is encapsulated in include/linux/taskstats.h
To avoid this documentation becoming obsolete as the interface evolves, only
an outline of the current version is given. taskstats.h always overrides the
description here.
struct taskstats is the common accounting structure for both per-pid and
per-tgid data. It is versioned and can be extended by each accounting subsystem
that is added to the kernel. The fields and their semantics are defined in the
taskstats.h file.
The data exchanged between user and kernel space is a netlink message belonging
to the NETLINK_GENERIC family and using the netlink attributes interface.
The messages are in the format
+----------+- - -+-------------+-------------------+
| nlmsghdr | Pad | genlmsghdr | taskstats payload |
+----------+- - -+-------------+-------------------+
The taskstats payload is one of the following three kinds:
1. Commands: Sent from user to kernel. Commands to get data on
a pid/tgid consist of one attribute, of type TASKSTATS_CMD_ATTR_PID/TGID,
containing a u32 pid or tgid in the attribute payload. The pid/tgid denotes
the task/process for which userspace wants statistics.
Commands to register/deregister interest in exit data from a set of cpus
consist of one attribute, of type
attribute payload. The cpumask is specified as an ascii string of
comma-separated cpu ranges e.g. to listen to exit data from cpus 1,2,3,5,7,8
the cpumask would be "1-3,5,7-8". If userspace forgets to deregister interest
in cpus before closing the listening socket, the kernel cleans up its interest
set over time. However, for the sake of efficiency, an explicit deregistration
is advisable.
2. Response for a command: sent from the kernel in response to a userspace
command. The payload is a series of three attributes of type:
a) TASKSTATS_TYPE_AGGR_PID/TGID : attribute containing no payload but indicates
a pid/tgid will be followed by some stats.
b) TASKSTATS_TYPE_PID/TGID: attribute whose payload is the pid/tgid whose stats
are being returned.
c) TASKSTATS_TYPE_STATS: attribute with a struct taskstats as payload. The
same structure is used for both per-pid and per-tgid stats.
3. New message sent by kernel whenever a task exits. The payload consists of a
series of attributes of the following type:
a) TASKSTATS_TYPE_AGGR_PID: indicates next two attributes will be pid+stats
b) TASKSTATS_TYPE_PID: contains exiting task's pid
c) TASKSTATS_TYPE_STATS: contains the exiting task's per-pid stats
d) TASKSTATS_TYPE_AGGR_TGID: indicates next two attributes will be tgid+stats
e) TASKSTATS_TYPE_TGID: contains tgid of process to which task belongs
f) TASKSTATS_TYPE_STATS: contains the per-tgid stats for exiting task's process
per-tgid stats
Taskstats provides per-process stats, in addition to per-task stats, since
resource management is often done at a process granularity and aggregating task
stats in userspace alone is inefficient and potentially inaccurate (due to lack
of atomicity).
However, maintaining per-process, in addition to per-task stats, within the
kernel has space and time overheads. To address this, the taskstats code
accumulates each exiting task's statistics into a process-wide data structure.
When the last task of a process exits, the process level data accumulated also
gets sent to userspace (along with the per-task data).
When a user queries to get per-tgid data, the sum of all other live threads in
the group is added up and added to the accumulated total for previously exited
threads of the same thread group.
Extending taskstats
There are two ways to extend the taskstats interface to export more
per-task/process stats as patches to collect them get added to the kernel
in future:
1. Adding more fields to the end of the existing struct taskstats. Backward
compatibility is ensured by the version number within the
structure. Userspace will use only the fields of the struct that correspond
to the version its using.
2. Defining separate statistic structs and using the netlink attributes
interface to return them. Since userspace processes each netlink attribute
independently, it can always ignore attributes whose type it does not
understand (because it is using an older version of the interface).
Choosing between 1. and 2. is a matter of trading off flexibility and
overhead. If only a few fields need to be added, then 1. is the preferable
path since the kernel and userspace don't need to incur the overhead of
processing new netlink attributes. But if the new fields expand the existing
struct too much, requiring disparate userspace accounting utilities to
unnecessarily receive large structures whose fields are of no interest, then
extending the attributes structure would be worthwhile.
Flow control for taskstats
When the rate of task exits becomes large, a listener may not be able to keep
up with the kernel's rate of sending per-tid/tgid exit data leading to data
loss. This possibility gets compounded when the taskstats structure gets
extended and the number of cpus grows large.
To avoid losing statistics, userspace should do one or more of the following:
- increase the receive buffer sizes for the netlink sockets opened by
listeners to receive exit data.
- create more listeners and reduce the number of cpus being listened to by
each listener. In the extreme case, there could be one listener for each cpu.
Users may also consider setting the cpu affinity of the listener to the subset
of cpus to which it listens, especially if they are listening to just one cpu.
Despite these measures, if the userspace receives ENOBUFS error messages
indicated overflow of receive buffers, it should take measures to handle the
loss of data.