/*
 * Synopsys DesignWare Multimedia Card Interface driver
 *  (Based on NXP driver for lpc 31xx)
 *
 * Copyright (C) 2009 NXP Semiconductors
 * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

#ifndef _LINUX_MMC_DW_MMC_H_
#define _LINUX_MMC_DW_MMC_H_

#define MAX_MCI_SLOTS	2

enum dw_mci_state {
	STATE_IDLE = 0,
	STATE_SENDING_CMD,
	STATE_SENDING_DATA,
	STATE_DATA_BUSY,
	STATE_SENDING_STOP,
	STATE_DATA_ERROR,
};

enum {
	EVENT_CMD_COMPLETE = 0,
	EVENT_XFER_COMPLETE,
	EVENT_DATA_COMPLETE,
	EVENT_DATA_ERROR,
	EVENT_XFER_ERROR
};

struct mmc_data;

/**
 * struct dw_mci - MMC controller state shared between all slots
 * @lock: Spinlock protecting the queue and associated data.
 * @regs: Pointer to MMIO registers.
 * @sg: Scatterlist entry currently being processed by PIO code, if any.
 * @pio_offset: Offset into the current scatterlist entry.
 * @cur_slot: The slot which is currently using the controller.
 * @mrq: The request currently being processed on @cur_slot,
 *	or NULL if the controller is idle.
 * @cmd: The command currently being sent to the card, or NULL.
 * @data: The data currently being transferred, or NULL if no data
 *	transfer is in progress.
 * @use_dma: Whether DMA channel is initialized or not.
 * @sg_dma: Bus address of DMA buffer.
 * @sg_cpu: Virtual address of DMA buffer.
 * @dma_ops: Pointer to platform-specific DMA callbacks.
 * @cmd_status: Snapshot of SR taken upon completion of the current
 *	command. Only valid when EVENT_CMD_COMPLETE is pending.
 * @data_status: Snapshot of SR taken upon completion of the current
 *	data transfer. Only valid when EVENT_DATA_COMPLETE or
 *	EVENT_DATA_ERROR is pending.
 * @stop_cmdr: Value to be loaded into CMDR when the stop command is
 *	to be sent.
 * @dir_status: Direction of current transfer.
 * @tasklet: Tasklet running the request state machine.
 * @card_tasklet: Tasklet handling card detect.
 * @pending_events: Bitmask of events flagged by the interrupt handler
 *	to be processed by the tasklet.
 * @completed_events: Bitmask of events which the state machine has
 *	processed.
 * @state: Tasklet state.
 * @queue: List of slots waiting for access to the controller.
 * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
 *	rate and timeout calculations.
 * @current_speed: Configured rate of the controller.
 * @num_slots: Number of slots available.
 * @pdev: Platform device associated with the MMC controller.
 * @pdata: Platform data associated with the MMC controller.
 * @slot: Slots sharing this MMC controller.
 * @data_shift: log2 of FIFO item size.
 * @push_data: Pointer to FIFO push function.
 * @pull_data: Pointer to FIFO pull function.
 * @quirks: Set of quirks that apply to specific versions of the IP.
 *
 * Locking
 * =======
 *
 * @lock is a softirq-safe spinlock protecting @queue as well as
 * @cur_slot, @mrq and @state. These must always be updated
 * at the same time while holding @lock.
 *
 * The @mrq field of struct dw_mci_slot is also protected by @lock,
 * and must always be written at the same time as the slot is added to
 * @queue.
 *
 * @pending_events and @completed_events are accessed using atomic bit
 * operations, so they don't need any locking.
 *
 * None of the fields touched by the interrupt handler need any
 * locking. However, ordering is important: Before EVENT_DATA_ERROR or
 * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
 * interrupts must be disabled and @data_status updated with a
 * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
 * CMDRDY interupt must be disabled and @cmd_status updated with a
 * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
 * bytes_xfered field of @data must be written. This is ensured by
 * using barriers.
 */
struct dw_mci {
	spinlock_t		lock;
	void __iomem		*regs;

	struct scatterlist	*sg;
	unsigned int		pio_offset;

	struct dw_mci_slot	*cur_slot;
	struct mmc_request	*mrq;
	struct mmc_command	*cmd;
	struct mmc_data		*data;

	/* DMA interface members*/
	int			use_dma;

	dma_addr_t		sg_dma;
	void			*sg_cpu;
	struct dw_mci_dma_ops	*dma_ops;
#ifdef CONFIG_MMC_DW_IDMAC
	unsigned int		ring_size;
#else
	struct dw_mci_dma_data	*dma_data;
#endif
	u32			cmd_status;
	u32			data_status;
	u32			stop_cmdr;
	u32			dir_status;
	struct tasklet_struct	tasklet;
	struct tasklet_struct	card_tasklet;
	unsigned long		pending_events;
	unsigned long		completed_events;
	enum dw_mci_state	state;
	struct list_head	queue;

	u32			bus_hz;
	u32			current_speed;
	u32			num_slots;
	struct platform_device	*pdev;
	struct dw_mci_board	*pdata;
	struct dw_mci_slot	*slot[MAX_MCI_SLOTS];

	/* FIFO push and pull */
	int			data_shift;
	void (*push_data)(struct dw_mci *host, void *buf, int cnt);
	void (*pull_data)(struct dw_mci *host, void *buf, int cnt);

	/* Workaround flags */
	u32			quirks;
};

/* DMA ops for Internal/External DMAC interface */
struct dw_mci_dma_ops {
	/* DMA Ops */
	int (*init)(struct dw_mci *host);
	void (*start)(struct dw_mci *host, unsigned int sg_len);
	void (*complete)(struct dw_mci *host);
	void (*stop)(struct dw_mci *host);
	void (*cleanup)(struct dw_mci *host);
	void (*exit)(struct dw_mci *host);
};

/* IP Quirks/flags. */
/* No special quirks or flags to cater for */
#define DW_MCI_QUIRK_NONE		0
/* DTO fix for command transmission with IDMAC configured */
#define DW_MCI_QUIRK_IDMAC_DTO		1
/* delay needed between retries on some 2.11a implementations */
#define DW_MCI_QUIRK_RETRY_DELAY	2
/* High Speed Capable - Supports HS cards (upto 50MHz) */
#define DW_MCI_QUIRK_HIGHSPEED		4


struct dma_pdata;

struct block_settings {
	unsigned short	max_segs;	/* see blk_queue_max_segments */
	unsigned int	max_blk_size;	/* maximum size of one mmc block */
	unsigned int	max_blk_count;	/* maximum number of blocks in one req*/
	unsigned int	max_req_size;	/* maximum number of bytes in one req*/
	unsigned int	max_seg_size;	/* see blk_queue_max_segment_size */
};

/* Board platform data */
struct dw_mci_board {
	u32 num_slots;

	u32 quirks; /* Workaround / Quirk flags */
	unsigned int bus_hz; /* Bus speed */

	/* delay in mS before detecting cards after interrupt */
	u32 detect_delay_ms;

	int (*init)(u32 slot_id, irq_handler_t , void *);
	int (*get_ro)(u32 slot_id);
	int (*get_cd)(u32 slot_id);
	int (*get_ocr)(u32 slot_id);
	int (*get_bus_wd)(u32 slot_id);
	/*
	 * Enable power to selected slot and set voltage to desired level.
	 * Voltage levels are specified using MMC_VDD_xxx defines defined
	 * in linux/mmc/host.h file.
	 */
	void (*setpower)(u32 slot_id, u32 volt);
	void (*exit)(u32 slot_id);
	void (*select_slot)(u32 slot_id);

	struct dw_mci_dma_ops *dma_ops;
	struct dma_pdata *data;
	struct block_settings *blk_settings;
};

#endif /* _LINUX_MMC_DW_MMC_H_ */