jaspertv_gpl_out/lib/ffmpeg/ffmpeg/doc/writing_filters.txt - nest-client-apple-tv/5.9.0/ffmpeg - Git at Google

 This document is a tutorial/initiation for writing simple filters in
 libavfilter.

 Foreword: just like everything else in FFmpeg, libavfilter is monolithic, which
 means that it is highly recommended that you submit your filters to the FFmpeg
 development mailing-list and make sure that they are applied. Otherwise, your filters
 are likely to have a very short lifetime due to more or less regular internal API
 changes, and a limited distribution, review, and testing.

 Bootstrap
 =========

 Let's say you want to write a new simple video filter called "foobar" which
 takes one frame in input, changes the pixels in whatever fashion you fancy, and
 outputs the modified frame. The most simple way of doing this is to take a
 similar filter.  We'll pick edgedetect, but any other should do. You can look
 for others using the `./ffmpeg -v 0 -filters|grep ' V->V '` command.

  - sed 's/edgedetect/foobar/g;s/EdgeDetect/Foobar/g' libavfilter/vf_edgedetect.c > libavfilter/vf_foobar.c
  - edit libavfilter/Makefile, and add an entry for "foobar" following the
    pattern of the other filters.
  - edit libavfilter/allfilters.c, and add an entry for "foobar" following the
    pattern of the other filters.
  - ./configure ...
  - make -j<whatever> ffmpeg
  - ./ffmpeg -i http://samples.ffmpeg.org/image-samples/lena.pnm -vf foobar foobar.png
    Note here: you can obviously use a random local image instead of a remote URL.

 If everything went right, you should get a foobar.png with Lena edge-detected.

 That's it, your new playground is ready.

 Some little details about what's going on:
 libavfilter/allfilters.c:avfilter_register_all() is called at runtime to create
 a list of the available filters, but it's important to know that this file is
 also parsed by the configure script, which in turn will define variables for
 the build system and the C:

     --- after running configure ---

     $ grep FOOBAR config.mak
     CONFIG_FOOBAR_FILTER=yes
     $ grep FOOBAR config.h
     #define CONFIG_FOOBAR_FILTER 1

 CONFIG_FOOBAR_FILTER=yes from the config.mak is later used to enable the filter in
 libavfilter/Makefile and CONFIG_FOOBAR_FILTER=1 from the config.h will be used
 for registering the filter in libavfilter/allfilters.c.

 Filter code layout
 ==================

 You now need some theory about the general code layout of a filter. Open your
 libavfilter/vf_foobar.c. This section will detail the important parts of the
 code you need to understand before messing with it.

 Copyright
 ---------

 First chunk is the copyright. Most filters are LGPL, and we are assuming
 vf_foobar is as well. We are also assuming vf_foobar is not an edge detector
 filter, so you can update the boilerplate with your credits.

 Doxy
 ----

 Next chunk is the Doxygen about the file. See https://ffmpeg.org/doxygen/trunk/.
 Detail here what the filter is, does, and add some references if you feel like
 it.

 Context
 -------

 Skip the headers and scroll down to the definition of FoobarContext. This is
 your local state context. It is already filled with 0 when you get it so do not
 worry about uninitialized reads into this context. This is where you put all
 "global" information that you need; typically the variables storing the user options.
 You'll notice the first field "const AVClass *class"; it's the only field you
 need to keep assuming you have a context. There is some magic you don't need to
 care about around this field, just let it be (in the first position) for now.

 Options
 -------

 Then comes the options array. This is what will define the user accessible
 options. For example, -vf foobar=mode=colormix:high=0.4:low=0.1. Most options
 have the following pattern:
   name, description, offset, type, default value, minimum value, maximum value, flags

  - name is the option name, keep it simple and lowercase
  - description are short, in lowercase, without period, and describe what they
    do, for example "set the foo of the bar"
  - offset is the offset of the field in your local context, see the OFFSET()
    macro; the option parser will use that information to fill the fields
    according to the user input
  - type is any of AV_OPT_TYPE_* defined in libavutil/opt.h
  - default value is an union where you pick the appropriate type; "{.dbl=0.3}",
    "{.i64=0x234}", "{.str=NULL}", ...
  - min and max values define the range of available values, inclusive
  - flags are AVOption generic flags. See AV_OPT_FLAG_* definitions

 When in doubt, just look at the other AVOption definitions all around the codebase,
 there are tons of examples.

 Class
 -----

 AVFILTER_DEFINE_CLASS(foobar) will define a unique foobar_class with some kind
 of signature referencing the options, etc. which will be referenced in the
 definition of the AVFilter.

 Filter definition
 -----------------

 At the end of the file, you will find foobar_inputs, foobar_outputs and
 the AVFilter ff_vf_foobar. Don't forget to update the AVFilter.description with
 a description of what the filter does, starting with a capitalized letter and
 ending with a period. You'd better drop the AVFilter.flags entry for now, and
 re-add them later depending on the capabilities of your filter.

 Callbacks
 ---------

 Let's now study the common callbacks. Before going into details, note that all
 these callbacks are explained in details in libavfilter/avfilter.h, so in
 doubt, refer to the doxy in that file.

 init()
 ~~~~~~

 First one to be called is init(). It's flagged as cold because not called
 often. Look for "cold" on
 http://gcc.gnu.org/onlinedocs/gcc/Function-Attributes.html for more
 information.

 As the name suggests, init() is where you eventually initialize and allocate
 your buffers, pre-compute your data, etc. Note that at this point, your local
 context already has the user options initialized, but you still haven't any
 clue about the kind of data input you will get, so this function is often
 mainly used to sanitize the user options.

 Some init()s will also define the number of inputs or outputs dynamically
 according to the user options. A good example of this is the split filter, but
 we won't cover this here since vf_foobar is just a simple 1:1 filter.

 uninit()
 ~~~~~~~~

 Similarly, there is the uninit() callback, doing what the name suggests. Free
 everything you allocated here.

 query_formats()
 ~~~~~~~~~~~~~~~

 This follows the init() and is used for the format negotiation. Basically
 you specify here what pixel format(s) (gray, rgb 32, yuv 4:2:0, ...) you accept
 for your inputs, and what you can output. All pixel formats are defined in
 libavutil/pixfmt.h. If you don't change the pixel format between the input and
 the output, you just have to define a pixel formats array and call
 ff_set_common_formats(). For more complex negotiation, you can refer to other
 filters such as vf_scale.

 config_props()
 ~~~~~~~~~~~~~~

 This callback is not necessary, but you will probably have one or more
 config_props() anyway. It's not a callback for the filter itself but for its
 inputs or outputs (they're called "pads" - AVFilterPad - in libavfilter's
 lexicon).

 Inside the input config_props(), you are at a point where you know which pixel
 format has been picked after query_formats(), and more information such as the
 video width and height (inlink->{w,h}). So if you need to update your internal
 context state depending on your input you can do it here. In edgedetect you can
 see that this callback is used to allocate buffers depending on these
 information. They will be destroyed in uninit().

 Inside the output config_props(), you can define what you want to change in the
 output. Typically, if your filter is going to double the size of the video, you
 will update outlink->w and outlink->h.

 filter_frame()
 ~~~~~~~~~~~~~~

 This is the callback you are waiting for from the beginning: it is where you
 process the received frames. Along with the frame, you get the input link from
 where the frame comes from.

     static int filter_frame(AVFilterLink *inlink, AVFrame *in) { ... }

 You can get the filter context through that input link:

     AVFilterContext *ctx = inlink->dst;

 Then access your internal state context:

     FoobarContext *foobar = ctx->priv;

 And also the output link where you will send your frame when you are done:

     AVFilterLink *outlink = ctx->outputs[0];

 Here, we are picking the first output. You can have several, but in our case we
 only have one since we are in a 1:1 input-output situation.

 If you want to define a simple pass-through filter, you can just do:

     return ff_filter_frame(outlink, in);

 But of course, you probably want to change the data of that frame.

 This can be done by accessing frame->data[] and frame->linesize[].  Important
 note here: the width does NOT match the linesize. The linesize is always
 greater or equal to the width. The padding created should not be changed or
 even read. Typically, keep in mind that a previous filter in your chain might
 have altered the frame dimension but not the linesize. Imagine a crop filter
 that halves the video size: the linesizes won't be changed, just the width.

     <-------------- linesize ------------------------>
     +-------------------------------+----------------+ ^
     |                               |                | |
     |                               |                | |
     |           picture             |    padding     | | height
     |                               |                | |
     |                               |                | |
     +-------------------------------+----------------+ v
     <----------- width ------------->

 Before modifying the "in" frame, you have to make sure it is writable, or get a
 new one. Multiple scenarios are possible here depending on the kind of
 processing you are doing.

 Let's say you want to change one pixel depending on multiple pixels (typically
 the surrounding ones) of the input. In that case, you can't do an in-place
 processing of the input so you will need to allocate a new frame, with the same
 properties as the input one, and send that new frame to the next filter:

     AVFrame *out = ff_get_video_buffer(outlink, outlink->w, outlink->h);
     if (!out) {
         av_frame_free(&in);
         return AVERROR(ENOMEM);
     }
     av_frame_copy_props(out, in);

     // out->data[...] = foobar(in->data[...])

     av_frame_free(&in);
     return ff_filter_frame(outlink, out);

 In-place processing
 ~~~~~~~~~~~~~~~~~~~

 If you can just alter the input frame, you probably just want to do that
 instead:

     av_frame_make_writable(in);
     // in->data[...] = foobar(in->data[...])
     return ff_filter_frame(outlink, in);

 You may wonder why a frame might not be writable. The answer is that for
 example a previous filter might still own the frame data: imagine a filter
 prior to yours in the filtergraph that needs to cache the frame. You must not
 alter that frame, otherwise it will make that previous filter buggy. This is
 where av_frame_make_writable() helps (it won't have any effect if the frame
 already is writable).

 The problem with using av_frame_make_writable() is that in the worst case it
 will copy the whole input frame before you change it all over again with your
 filter: if the frame is not writable, av_frame_make_writable() will allocate
 new buffers, and copy the input frame data. You don't want that, and you can
 avoid it by just allocating a new buffer if necessary, and process from in to
 out in your filter, saving the memcpy. Generally, this is done following this
 scheme:

     int direct = 0;
     AVFrame *out;

     if (av_frame_is_writable(in)) {
         direct = 1;
         out = in;
     } else {
         out = ff_get_video_buffer(outlink, outlink->w, outlink->h);
         if (!out) {
             av_frame_free(&in);
             return AVERROR(ENOMEM);
         }
         av_frame_copy_props(out, in);
     }

     // out->data[...] = foobar(in->data[...])

     if (!direct)
         av_frame_free(&in);
     return ff_filter_frame(outlink, out);

 Of course, this will only work if you can do in-place processing. To test if
 your filter handles well the permissions, you can use the perms filter. For
 example with:

     -vf perms=random,foobar

 Make sure no automatic pixel conversion is inserted between perms and foobar,
 otherwise the frames permissions might change again and the test will be
 meaningless: add av_log(0,0,"direct=%d\n",direct) in your code to check that.
 You can avoid the issue with something like:

     -vf format=rgb24,perms=random,foobar

 ...assuming your filter accepts rgb24 of course. This will make sure the
 necessary conversion is inserted before the perms filter.

 Timeline
 ~~~~~~~~

 Adding timeline support
 (http://ffmpeg.org/ffmpeg-filters.html#Timeline-editing) is often an easy
 feature to add. In the most simple case, you just have to add
 AVFILTER_FLAG_SUPPORT_TIMELINE_GENERIC to the AVFilter.flags. You can typically
 do this when your filter does not need to save the previous context frames, or
 basically if your filter just alters whatever goes in and doesn't need
 previous/future information. See for instance commit 86cb986ce that adds
 timeline support to the fieldorder filter.

 In some cases, you might need to reset your context somehow. This is handled by
 the AVFILTER_FLAG_SUPPORT_TIMELINE_INTERNAL flag which is used if the filter
 must not process the frames but still wants to keep track of the frames going
 through (to keep them in cache for when it's enabled again). See for example
 commit 69d72140a that adds timeline support to the phase filter.

 Threading
 ~~~~~~~~~

 libavfilter does not yet support frame threading, but you can add slice
 threading to your filters.

 Let's say the foobar filter has the following frame processing function:

     dst = out->data[0];
     src = in ->data[0];

     for (y = 0; y < inlink->h; y++) {
         for (x = 0; x < inlink->w; x++)
             dst[x] = foobar(src[x]);
         dst += out->linesize[0];
         src += in ->linesize[0];
     }

 The first thing is to make this function work into slices. The new code will
 look like this:

     for (y = slice_start; y < slice_end; y++) {
         for (x = 0; x < inlink->w; x++)
             dst[x] = foobar(src[x]);
         dst += out->linesize[0];
         src += in ->linesize[0];
     }

 The source and destination pointers, and slice_start/slice_end will be defined
 according to the number of jobs. Generally, it looks like this:

     const int slice_start = (in->height *  jobnr   ) / nb_jobs;
     const int slice_end   = (in->height * (jobnr+1)) / nb_jobs;
     uint8_t       *dst = out->data[0] + slice_start * out->linesize[0];
     const uint8_t *src =  in->data[0] + slice_start *  in->linesize[0];

 This new code will be isolated in a new filter_slice():

     static int filter_slice(AVFilterContext *ctx, void *arg, int jobnr, int nb_jobs) { ... }

 Note that we need our input and output frame to define slice_{start,end} and
 dst/src, which are not available in that callback. They will be transmitted
 through the opaque void *arg. You have to define a structure which contains
 everything you need:

     typedef struct ThreadData {
         AVFrame *in, *out;
     } ThreadData;

 If you need some more information from your local context, put them here.

 In you filter_slice function, you access it like that:

     const ThreadData *td = arg;

 Then in your filter_frame() callback, you need to call the threading
 distributor with something like this:

     ThreadData td;

     // ...

     td.in  = in;
     td.out = out;
     ctx->internal->execute(ctx, filter_slice, &td, NULL, FFMIN(outlink->h, ctx->graph->nb_threads));

     // ...

     return ff_filter_frame(outlink, out);

 Last step is to add AVFILTER_FLAG_SLICE_THREADS flag to AVFilter.flags.

 For more example of slice threading additions, you can try to run git log -p
 --grep 'slice threading' libavfilter/

 Finalization
 ~~~~~~~~~~~~

 When your awesome filter is finished, you have a few more steps before you're
 done:

  - write its documentation in doc/filters.texi, and test the output with make
    doc/ffmpeg-filters.html.
  - add a FATE test, generally by adding an entry in
    tests/fate/filter-video.mak, add running make fate-filter-foobar GEN=1 to
    generate the data.
  - add an entry in the Changelog
  - edit libavfilter/version.h and increase LIBAVFILTER_VERSION_MINOR by one
    (and reset LIBAVFILTER_VERSION_MICRO to 100)
  - git add ... && git commit -m "avfilter: add foobar filter." && git format-patch -1

 When all of this is done, you can submit your patch to the ffmpeg-devel
 mailing-list for review.  If you need any help, feel free to come on our IRC
 channel, #ffmpeg-devel on irc.freenode.net.
	This document is a tutorial/initiation for writing simple filters in
	libavfilter.

	Foreword: just like everything else in FFmpeg, libavfilter is monolithic, which
	means that it is highly recommended that you submit your filters to the FFmpeg
	development mailing-list and make sure that they are applied. Otherwise, your filters
	are likely to have a very short lifetime due to more or less regular internal API
	changes, and a limited distribution, review, and testing.

	Bootstrap
	=========

	Let's say you want to write a new simple video filter called "foobar" which
	takes one frame in input, changes the pixels in whatever fashion you fancy, and
	outputs the modified frame. The most simple way of doing this is to take a
	similar filter. We'll pick edgedetect, but any other should do. You can look
	for others using the `./ffmpeg -v 0 -filters\|grep ' V->V '` command.

	- sed 's/edgedetect/foobar/g;s/EdgeDetect/Foobar/g' libavfilter/vf_edgedetect.c > libavfilter/vf_foobar.c
	- edit libavfilter/Makefile, and add an entry for "foobar" following the
	pattern of the other filters.
	- edit libavfilter/allfilters.c, and add an entry for "foobar" following the
	pattern of the other filters.
	- ./configure ...
	- make -j<whatever> ffmpeg
	- ./ffmpeg -i http://samples.ffmpeg.org/image-samples/lena.pnm -vf foobar foobar.png
	Note here: you can obviously use a random local image instead of a remote URL.

	If everything went right, you should get a foobar.png with Lena edge-detected.

	That's it, your new playground is ready.

	Some little details about what's going on:
	libavfilter/allfilters.c:avfilter_register_all() is called at runtime to create
	a list of the available filters, but it's important to know that this file is
	also parsed by the configure script, which in turn will define variables for
	the build system and the C:

	--- after running configure ---

	$ grep FOOBAR config.mak
	CONFIG_FOOBAR_FILTER=yes
	$ grep FOOBAR config.h
	#define CONFIG_FOOBAR_FILTER 1

	CONFIG_FOOBAR_FILTER=yes from the config.mak is later used to enable the filter in
	libavfilter/Makefile and CONFIG_FOOBAR_FILTER=1 from the config.h will be used
	for registering the filter in libavfilter/allfilters.c.

	Filter code layout
	==================

	You now need some theory about the general code layout of a filter. Open your
	libavfilter/vf_foobar.c. This section will detail the important parts of the
	code you need to understand before messing with it.

	Copyright
	---------

	First chunk is the copyright. Most filters are LGPL, and we are assuming
	vf_foobar is as well. We are also assuming vf_foobar is not an edge detector
	filter, so you can update the boilerplate with your credits.

	Doxy
	----

	Next chunk is the Doxygen about the file. See https://ffmpeg.org/doxygen/trunk/.
	Detail here what the filter is, does, and add some references if you feel like
	it.

	Context
	-------

	Skip the headers and scroll down to the definition of FoobarContext. This is
	your local state context. It is already filled with 0 when you get it so do not
	worry about uninitialized reads into this context. This is where you put all
	"global" information that you need; typically the variables storing the user options.
	You'll notice the first field "const AVClass *class"; it's the only field you
	need to keep assuming you have a context. There is some magic you don't need to
	care about around this field, just let it be (in the first position) for now.

	Options
	-------

	Then comes the options array. This is what will define the user accessible
	options. For example, -vf foobar=mode=colormix:high=0.4:low=0.1. Most options
	have the following pattern:
	name, description, offset, type, default value, minimum value, maximum value, flags

	- name is the option name, keep it simple and lowercase
	- description are short, in lowercase, without period, and describe what they
	do, for example "set the foo of the bar"
	- offset is the offset of the field in your local context, see the OFFSET()
	macro; the option parser will use that information to fill the fields
	according to the user input
	- type is any of AV_OPT_TYPE_* defined in libavutil/opt.h
	- default value is an union where you pick the appropriate type; "{.dbl=0.3}",
	"{.i64=0x234}", "{.str=NULL}", ...
	- min and max values define the range of available values, inclusive
	- flags are AVOption generic flags. See AV_OPT_FLAG_* definitions

	When in doubt, just look at the other AVOption definitions all around the codebase,
	there are tons of examples.

	Class
	-----

	AVFILTER_DEFINE_CLASS(foobar) will define a unique foobar_class with some kind
	of signature referencing the options, etc. which will be referenced in the
	definition of the AVFilter.

	Filter definition
	-----------------

	At the end of the file, you will find foobar_inputs, foobar_outputs and
	the AVFilter ff_vf_foobar. Don't forget to update the AVFilter.description with
	a description of what the filter does, starting with a capitalized letter and
	ending with a period. You'd better drop the AVFilter.flags entry for now, and
	re-add them later depending on the capabilities of your filter.

	Callbacks
	---------

	Let's now study the common callbacks. Before going into details, note that all
	these callbacks are explained in details in libavfilter/avfilter.h, so in
	doubt, refer to the doxy in that file.

	init()
	~~~~~~

	First one to be called is init(). It's flagged as cold because not called
	often. Look for "cold" on
	http://gcc.gnu.org/onlinedocs/gcc/Function-Attributes.html for more
	information.

	As the name suggests, init() is where you eventually initialize and allocate
	your buffers, pre-compute your data, etc. Note that at this point, your local
	context already has the user options initialized, but you still haven't any
	clue about the kind of data input you will get, so this function is often
	mainly used to sanitize the user options.

	Some init()s will also define the number of inputs or outputs dynamically
	according to the user options. A good example of this is the split filter, but
	we won't cover this here since vf_foobar is just a simple 1:1 filter.

	uninit()
	~~~~~~~~

	Similarly, there is the uninit() callback, doing what the name suggests. Free
	everything you allocated here.

	query_formats()
	~~~~~~~~~~~~~~~

	This follows the init() and is used for the format negotiation. Basically
	you specify here what pixel format(s) (gray, rgb 32, yuv 4:2:0, ...) you accept
	for your inputs, and what you can output. All pixel formats are defined in
	libavutil/pixfmt.h. If you don't change the pixel format between the input and
	the output, you just have to define a pixel formats array and call
	ff_set_common_formats(). For more complex negotiation, you can refer to other
	filters such as vf_scale.

	config_props()
	~~~~~~~~~~~~~~

	This callback is not necessary, but you will probably have one or more
	config_props() anyway. It's not a callback for the filter itself but for its
	inputs or outputs (they're called "pads" - AVFilterPad - in libavfilter's
	lexicon).

	Inside the input config_props(), you are at a point where you know which pixel
	format has been picked after query_formats(), and more information such as the
	video width and height (inlink->{w,h}). So if you need to update your internal
	context state depending on your input you can do it here. In edgedetect you can
	see that this callback is used to allocate buffers depending on these
	information. They will be destroyed in uninit().

	Inside the output config_props(), you can define what you want to change in the
	output. Typically, if your filter is going to double the size of the video, you
	will update outlink->w and outlink->h.

	filter_frame()
	~~~~~~~~~~~~~~

	This is the callback you are waiting for from the beginning: it is where you
	process the received frames. Along with the frame, you get the input link from
	where the frame comes from.

	static int filter_frame(AVFilterLink inlink, AVFrame in) { ... }

	You can get the filter context through that input link:

	AVFilterContext *ctx = inlink->dst;

	Then access your internal state context:

	FoobarContext *foobar = ctx->priv;

	And also the output link where you will send your frame when you are done:

	AVFilterLink *outlink = ctx->outputs[0];

	Here, we are picking the first output. You can have several, but in our case we
	only have one since we are in a 1:1 input-output situation.

	If you want to define a simple pass-through filter, you can just do:

	return ff_filter_frame(outlink, in);

	But of course, you probably want to change the data of that frame.

	This can be done by accessing frame->data[] and frame->linesize[]. Important
	note here: the width does NOT match the linesize. The linesize is always
	greater or equal to the width. The padding created should not be changed or
	even read. Typically, keep in mind that a previous filter in your chain might
	have altered the frame dimension but not the linesize. Imagine a crop filter
	that halves the video size: the linesizes won't be changed, just the width.

	<-------------- linesize ------------------------>
	+-------------------------------+----------------+ ^
	\| \| \| \|
	\| \| \| \|
	\| picture \| padding \| \| height
	\| \| \| \|
	\| \| \| \|
	+-------------------------------+----------------+ v
	<----------- width ------------->

	Before modifying the "in" frame, you have to make sure it is writable, or get a
	new one. Multiple scenarios are possible here depending on the kind of
	processing you are doing.

	Let's say you want to change one pixel depending on multiple pixels (typically
	the surrounding ones) of the input. In that case, you can't do an in-place
	processing of the input so you will need to allocate a new frame, with the same
	properties as the input one, and send that new frame to the next filter:

	AVFrame *out = ff_get_video_buffer(outlink, outlink->w, outlink->h);
	if (!out) {
	av_frame_free(&in);
	return AVERROR(ENOMEM);
	}
	av_frame_copy_props(out, in);

	// out->data[...] = foobar(in->data[...])

	av_frame_free(&in);
	return ff_filter_frame(outlink, out);

	In-place processing
	~~~~~~~~~~~~~~~~~~~

	If you can just alter the input frame, you probably just want to do that
	instead:

	av_frame_make_writable(in);
	// in->data[...] = foobar(in->data[...])
	return ff_filter_frame(outlink, in);

	You may wonder why a frame might not be writable. The answer is that for
	example a previous filter might still own the frame data: imagine a filter
	prior to yours in the filtergraph that needs to cache the frame. You must not
	alter that frame, otherwise it will make that previous filter buggy. This is
	where av_frame_make_writable() helps (it won't have any effect if the frame
	already is writable).

	The problem with using av_frame_make_writable() is that in the worst case it
	will copy the whole input frame before you change it all over again with your
	filter: if the frame is not writable, av_frame_make_writable() will allocate
	new buffers, and copy the input frame data. You don't want that, and you can
	avoid it by just allocating a new buffer if necessary, and process from in to
	out in your filter, saving the memcpy. Generally, this is done following this
	scheme:

	int direct = 0;
	AVFrame *out;

	if (av_frame_is_writable(in)) {
	direct = 1;
	out = in;
	} else {
	out = ff_get_video_buffer(outlink, outlink->w, outlink->h);
	if (!out) {
	av_frame_free(&in);
	return AVERROR(ENOMEM);
	}
	av_frame_copy_props(out, in);
	}

	// out->data[...] = foobar(in->data[...])

	if (!direct)
	av_frame_free(&in);
	return ff_filter_frame(outlink, out);

	Of course, this will only work if you can do in-place processing. To test if
	your filter handles well the permissions, you can use the perms filter. For
	example with:

	-vf perms=random,foobar

	Make sure no automatic pixel conversion is inserted between perms and foobar,
	otherwise the frames permissions might change again and the test will be
	meaningless: add av_log(0,0,"direct=%d\n",direct) in your code to check that.
	You can avoid the issue with something like:

	-vf format=rgb24,perms=random,foobar

	...assuming your filter accepts rgb24 of course. This will make sure the
	necessary conversion is inserted before the perms filter.

	Timeline
	~~~~~~~~

	Adding timeline support
	(http://ffmpeg.org/ffmpeg-filters.html#Timeline-editing) is often an easy
	feature to add. In the most simple case, you just have to add
	AVFILTER_FLAG_SUPPORT_TIMELINE_GENERIC to the AVFilter.flags. You can typically
	do this when your filter does not need to save the previous context frames, or
	basically if your filter just alters whatever goes in and doesn't need
	previous/future information. See for instance commit 86cb986ce that adds
	timeline support to the fieldorder filter.

	In some cases, you might need to reset your context somehow. This is handled by
	the AVFILTER_FLAG_SUPPORT_TIMELINE_INTERNAL flag which is used if the filter
	must not process the frames but still wants to keep track of the frames going
	through (to keep them in cache for when it's enabled again). See for example
	commit 69d72140a that adds timeline support to the phase filter.

	Threading
	~~~~~~~~~

	libavfilter does not yet support frame threading, but you can add slice
	threading to your filters.

	Let's say the foobar filter has the following frame processing function:

	dst = out->data[0];
	src = in ->data[0];

	for (y = 0; y < inlink->h; y++) {
	for (x = 0; x < inlink->w; x++)
	dst[x] = foobar(src[x]);
	dst += out->linesize[0];
	src += in ->linesize[0];
	}

	The first thing is to make this function work into slices. The new code will
	look like this:

	for (y = slice_start; y < slice_end; y++) {
	for (x = 0; x < inlink->w; x++)
	dst[x] = foobar(src[x]);
	dst += out->linesize[0];
	src += in ->linesize[0];
	}

	The source and destination pointers, and slice_start/slice_end will be defined
	according to the number of jobs. Generally, it looks like this:

	const int slice_start = (in->height * jobnr ) / nb_jobs;
	const int slice_end = (in->height * (jobnr+1)) / nb_jobs;
	uint8_t dst = out->data[0] + slice_start out->linesize[0];
	const uint8_t src = in->data[0] + slice_start in->linesize[0];

	This new code will be isolated in a new filter_slice():

	static int filter_slice(AVFilterContext ctx, void arg, int jobnr, int nb_jobs) { ... }

	Note that we need our input and output frame to define slice_{start,end} and
	dst/src, which are not available in that callback. They will be transmitted
	through the opaque void *arg. You have to define a structure which contains
	everything you need:

	typedef struct ThreadData {
	AVFrame in, out;
	} ThreadData;

	If you need some more information from your local context, put them here.

	In you filter_slice function, you access it like that:

	const ThreadData *td = arg;

	Then in your filter_frame() callback, you need to call the threading
	distributor with something like this:

	ThreadData td;

	// ...

	td.in = in;
	td.out = out;
	ctx->internal->execute(ctx, filter_slice, &td, NULL, FFMIN(outlink->h, ctx->graph->nb_threads));

	// ...

	return ff_filter_frame(outlink, out);

	Last step is to add AVFILTER_FLAG_SLICE_THREADS flag to AVFilter.flags.

	For more example of slice threading additions, you can try to run git log -p
	--grep 'slice threading' libavfilter/

	Finalization
	~~~~~~~~~~~~

	When your awesome filter is finished, you have a few more steps before you're
	done:

	- write its documentation in doc/filters.texi, and test the output with make
	doc/ffmpeg-filters.html.
	- add a FATE test, generally by adding an entry in
	tests/fate/filter-video.mak, add running make fate-filter-foobar GEN=1 to
	generate the data.
	- add an entry in the Changelog
	- edit libavfilter/version.h and increase LIBAVFILTER_VERSION_MINOR by one
	(and reset LIBAVFILTER_VERSION_MICRO to 100)
	- git add ... && git commit -m "avfilter: add foobar filter." && git format-patch -1

	When all of this is done, you can submit your patch to the ffmpeg-devel
	mailing-list for review. If you need any help, feel free to come on our IRC
	channel, #ffmpeg-devel on irc.freenode.net.