/**********************************************************************
* $Id$		lpc18xx_adc.h			2011-06-02
*//**
* @file		lpc18xx_adc.h
* @brief	Contains all macro definitions and function prototypes
* 			support for ADC firmware library on LPC18xx
* @version	1.0
* @date		02. June. 2011
* @author	NXP MCU SW Application Team
*
* Copyright(C) 2011, NXP Semiconductor
* All rights reserved.
*
***********************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
**********************************************************************/

/* Peripheral group ----------------------------------------------------------- */
/** @defgroup ADC ADC (Analog to Digital Converter)
 * @ingroup LPC1800CMSIS_FwLib_Drivers
 * @{
 */

#ifndef LPC18XX_ADC_H_
#define LPC18XX_ADC_H_

/* Includes ------------------------------------------------------------------- */
#include "LPC18xx.h"
#include "lpc_types.h"


#ifdef __cplusplus
extern "C"
{
#endif

/* Private macros ------------------------------------------------------------- */
/** @defgroup ADC_Private_Macros ADC Private Macros
 * @{
 */

/* -------------------------- BIT DEFINITIONS ----------------------------------- */
/*********************************************************************//**
 * Macro defines for ADC  control register
 **********************************************************************/
/**  Selects which of the AD0.0:7 pins is (are) to be sampled and converted */
#define ADC_CR_CH_SEL(n)	((1UL << n))
/**  The APB clock (PCLK) is divided by (this value plus one)
* to produce the clock for the A/D */
#define ADC_CR_CLKDIV(n)	((n<<8))
/**  Repeated conversions A/D enable bit */
#define ADC_CR_BURST		((1UL<<16))
/**  number of accuracy bits */
#define ADC_CR_BITACC(n)	(((n)<<17))
/**  ADC convert in power down mode */
#define ADC_CR_PDN			((1UL<<21))
/**  Start mask bits */
#define ADC_CR_START_MASK	((7UL<<24))
/**  Select Start Mode */
#define ADC_CR_START_MODE_SEL(SEL)	((SEL<<24))
/**  Start conversion now */
#define ADC_CR_START_NOW		((1UL<<24))
/**  Start conversion when the edge selected by bit 27 occurs on CTOUT_15 */
#define ADC_CR_START_CTOUT15	((2UL<<24))
/** Start conversion when the edge selected by bit 27 occurs on CTOUT_8 */
#define ADC_CR_START_CTOUT8		((3UL<<24))
/**  Start conversion when the edge selected by bit 27 occurs on ADCTRIG0 */
#define ADC_CR_START_ADCTRIG0	((4UL<<24))
/**  Start conversion when the edge selected by bit 27 occurs on ADCTRIG1 */
#define ADC_CR_START_ADCTRIG1	((5UL<<24))
/**  Start conversion when the edge selected by bit 27 occurs on Motocon PWM output MCOA2 */
#define ADC_CR_START_MCOA2		((6UL<<24))
/**  Start conversion on a falling edge on the selected CAP/MAT signal */
#define ADC_CR_EDGE			((1UL<<27))

/*********************************************************************//**
 * Macro defines for ADC Global Data register
 **********************************************************************/
/** When DONE is 1, this field contains result value of ADC conversion */
#define ADC_GDR_RESULT(n)		(((n>>4)&0xFFF))
/** These bits contain the channel from which the LS bits were converted */
#define ADC_GDR_CH(n)			(((n>>24)&0x7))
/** This bit is 1 in burst mode if the results of one or
 * more conversions was (were) lost */
#define ADC_GDR_OVERRUN_FLAG	((1UL<<30))
/** This bit is set to 1 when an A/D conversion completes */
#define ADC_GDR_DONE_FLAG		((1UL<<31))

/** This bits is used to mask for Channel */
#define ADC_GDR_CH_MASK		((7UL<<24))
/*********************************************************************//**
 * Macro defines for ADC Interrupt register
 **********************************************************************/
/** These bits allow control over which A/D channels generate
 * interrupts for conversion completion */
#define ADC_INTEN_CH(n)			((1UL<<n))
/** When 1, enables the global DONE flag in ADDR to generate an interrupt */
#define ADC_INTEN_GLOBAL		((1UL<<8))

/*********************************************************************//**
 * Macro defines for ADC Data register
 **********************************************************************/
/** When DONE is 1, this field contains result value of ADC conversion */
#define ADC_DR_RESULT(n)		(((n>>6)&0x3FF))
/** These bits mirror the OVERRRUN status flags that appear in the
 * result register for each A/D channel */
#define ADC_DR_OVERRUN_FLAG		((1UL<<30))
/** This bit is set to 1 when an A/D conversion completes. It is cleared
 * when this register is read */
#define ADC_DR_DONE_FLAG		((1UL<<31))

/*********************************************************************//**
 * Macro defines for ADC Status register
**********************************************************************/
/** These bits mirror the DONE status flags that appear in the result
 * register for each A/D channel */
#define ADC_STAT_CH_DONE_FLAG(n)		((n&0xFF))
/** These bits mirror the OVERRRUN status flags that appear in the
 * result register for each A/D channel */
#define ADC_STAT_CH_OVERRUN_FLAG(n)		(((n>>8)&0xFF))
/** This bit is the A/D interrupt flag */
#define ADC_STAT_INT_FLAG				((1UL<<16))

/*********************************************************************//**
 * Macro defines for ADC Trim register
**********************************************************************/
/** Offset trim bits for ADC operation */
#define ADC_ADCOFFS(n)		(((n&0xF)<<4))
/** Written to boot code*/
#define ADC_TRIM(n)		    (((n&0xF)<<8))

/* ------------------- CHECK PARAM DEFINITIONS ------------------------- */
/** Check ADC parameter */
#define PARAM_ADCx(n)    (((uint32_t *)n)==((uint32_t *)LPC_ADC0) || ((uint32_t *)n)==((uint32_t *)LPC_ADC1))

/** Check ADC state parameter */
#define PARAM_ADC_START_ON_EDGE_OPT(OPT)    ((OPT == ADC_START_ON_RISING)||(OPT == ADC_START_ON_FALLING))

/** Check ADC state parameter */
#define PARAM_ADC_DATA_STATUS(OPT)    ((OPT== ADC_DATA_BURST)||(OPT== ADC_DATA_DONE))

/** Check ADC rate parameter */
#define PARAM_ADC_RATE(rate)	((rate>0)&&(rate<=200000))

/** Check ADC bits accuracy parameter */
#define PARAM_ADC_BITSACC(x)	((x>=3)&&(x<=10))

/** Check ADC channel selection parameter */
#define PARAM_ADC_CHANNEL_SELECTION(SEL)	((SEL == ADC_CHANNEL_0)||(ADC_CHANNEL_1)\
||(SEL == ADC_CHANNEL_2)|(ADC_CHANNEL_3)\
||(SEL == ADC_CHANNEL_4)||(ADC_CHANNEL_5)\
||(SEL == ADC_CHANNEL_6)||(ADC_CHANNEL_7))

/** Check ADC start option parameter */
#define PARAM_ADC_START_OPT(OPT)    ((OPT == ADC_START_CONTINUOUS)||(OPT == ADC_START_NOW)\
||(OPT == ADC_START_ON_CTOUT15)||(OPT == ADC_START_ON_CTOUT8)\
||(OPT == ADC_START_ON_ADCTRIG0)||(OPT == ADC_START_ON_ADCTRIG1)\
||(OPT == ADC_START_ON_MCOA2))

/** Check ADC interrupt type parameter */
#define PARAM_ADC_TYPE_INT_OPT(OPT)    ((OPT == ADC_ADINTEN0)||(OPT == ADC_ADINTEN1)\
||(OPT == ADC_ADINTEN2)||(OPT == ADC_ADINTEN3)\
||(OPT == ADC_ADINTEN4)||(OPT == ADC_ADINTEN5)\
||(OPT == ADC_ADINTEN6)||(OPT == ADC_ADINTEN7)\
||(OPT == ADC_ADGINTEN))

/**
 * @}
 */


/* Public Types --------------------------------------------------------------- */
/** @defgroup ADC_Public_Types ADC Public Types
 * @{
 */

/*********************************************************************//**
 * @brief ADC enumeration
 **********************************************************************/
/** @brief Channel Selection */
typedef enum
{
	ADC_CHANNEL_0  = 0, /*!<  Channel 0 */
	ADC_CHANNEL_1,		/*!<  Channel 1 */
	ADC_CHANNEL_2,		/*!<  Channel 2 */
	ADC_CHANNEL_3,		/*!<  Channel 3 */
	ADC_CHANNEL_4,		/*!<  Channel 4 */
	ADC_CHANNEL_5,		/*!<  Channel 5 */
	ADC_CHANNEL_6,		/*!<  Channel 6 */
	ADC_CHANNEL_7		/*!<  Channel 7 */
}ADC_CHANNEL_SELECTION;

/** @brief Type of start option */
typedef enum
{
	ADC_START_CONTINUOUS =0,	/*!< Continuous mode */
	ADC_START_NOW,				/*!< Start conversion now */
	ADC_START_ON_CTOUT15,			/*!< Start conversion when the edge selected
								 * by bit 27 occurs on CTOUT_15 */
	ADC_START_ON_CTOUT8,			/*!< Start conversion when the edge selected
								 * by bit 27 occurs on CTOUT_8 */
	ADC_START_ON_ADCTRIG0,			/*!< Start conversion when the edge selected
								 * by bit 27 occurs on ADCTRIG0 */
	ADC_START_ON_ADCTRIG1,			/*!< Start conversion when the edge selected
								 * by bit 27 occurs on ADCTRIG1 */
	ADC_START_ON_MCOA2			/*!< Start conversion when the edge selected
								  * by bit 27 occurs on Motocon PWM output MCOA2 */
} ADC_START_OPT;


/** @brief Type of edge when start conversion on the selected CAP/MAT signal */
typedef enum
{
	ADC_START_ON_RISING = 0,	/*!< Start conversion on a rising edge
								*on the selected CAP/MAT signal */
	ADC_START_ON_FALLING		/*!< Start conversion on a falling edge
								*on the selected CAP/MAT signal */
} ADC_START_ON_EDGE_OPT;

/** @brief* ADC type interrupt enum */
typedef enum
{
	ADC_ADINTEN0 = 0,		/*!< Interrupt channel 0 */
	ADC_ADINTEN1,			/*!< Interrupt channel 1 */
	ADC_ADINTEN2,			/*!< Interrupt channel 2 */
	ADC_ADINTEN3,			/*!< Interrupt channel 3 */
	ADC_ADINTEN4,			/*!< Interrupt channel 4 */
	ADC_ADINTEN5,			/*!< Interrupt channel 5 */
	ADC_ADINTEN6,			/*!< Interrupt channel 6 */
	ADC_ADINTEN7,			/*!< Interrupt channel 7 */
	ADC_ADGINTEN			/*!< Individual channel/global flag done generate an interrupt */
}ADC_TYPE_INT_OPT;

/** @brief ADC Data  status */
typedef enum
{
	ADC_DATA_BURST = 0,		/*Burst bit*/
	ADC_DATA_DONE		 /*Done bit*/
}ADC_DATA_STATUS;

/**
 * @}
 */


/* Public Functions ----------------------------------------------------------- */
/** @defgroup ADC_Public_Functions ADC Public Functions
 * @{
 */
/* Init/DeInit ADC peripheral ----------------*/
void ADC_Init(LPC_ADCn_Type *ADCx, uint32_t rate, uint8_t bits_accuracy);
void ADC_DeInit(LPC_ADCn_Type *ADCx);

/* Enable/Disable ADC functions --------------*/
void ADC_BurstCmd(LPC_ADCn_Type *ADCx, FunctionalState NewState);
void ADC_PowerdownCmd(LPC_ADCn_Type *ADCx, FunctionalState NewState);
void ADC_StartCmd(LPC_ADCn_Type *ADCx, uint8_t start_mode);
void ADC_ChannelCmd (LPC_ADCn_Type *ADCx, uint8_t Channel, FunctionalState NewState);

/* Configure ADC functions -------------------*/
void ADC_EdgeStartConfig(LPC_ADCn_Type *ADCx, uint8_t EdgeOption);
void ADC_IntConfig (LPC_ADCn_Type *ADCx, ADC_TYPE_INT_OPT IntType, FunctionalState NewState);

/* Get ADC information functions -------------------*/
uint16_t ADC_ChannelGetData(LPC_ADCn_Type *ADCx, uint8_t channel);
FlagStatus ADC_ChannelGetStatus(LPC_ADCn_Type *ADCx, uint8_t channel, uint32_t StatusType);
uint32_t ADC_GlobalGetData(LPC_ADCn_Type *ADCx);
FlagStatus	ADC_GlobalGetStatus(LPC_ADCn_Type *ADCx, uint32_t StatusType);

/**
 * @}
 */


#ifdef __cplusplus
}
#endif


#endif /* LPC18XX_ADC_H_ */

/**
 * @}
 */

/* --------------------------------- End Of File ------------------------------ */