blob: 9349982c464aa247b631be59ff4eab763e45a28e [file] [log] [blame]
//*****************************************************************************
//
// comp.h - Prototypes for the analog comparator driver.
//
// Copyright (c) 2005,2006 Luminary Micro, Inc. All rights reserved.
//
// Software License Agreement
//
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and
// exclusively on LMI's Stellaris Family of microcontroller products.
//
// The software is owned by LMI and/or its suppliers, and is protected under
// applicable copyright laws. All rights are reserved. Any use in violation
// of the foregoing restrictions may subject the user to criminal sanctions
// under applicable laws, as well as to civil liability for the breach of the
// terms and conditions of this license.
//
// THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 991 of the Stellaris Driver Library.
//
//*****************************************************************************
#ifndef __COMP_H__
#define __COMP_H__
#ifdef __cplusplus
extern "C"
{
#endif
//*****************************************************************************
//
// Values that can be passed to ComparatorConfigure() as the ulConfig
// parameter. For each group (i.e. COMP_TRIG_xxx, COMP_INT_xxx, etc.), one of
// the values may be selected and ORed together will values from the other
// groups.
//
//*****************************************************************************
#define COMP_TRIG_NONE 0x00000000 // No ADC trigger
#define COMP_TRIG_HIGH 0x00000880 // Trigger when high
#define COMP_TRIG_LOW 0x00000800 // Trigger when low
#define COMP_TRIG_FALL 0x00000820 // Trigger on falling edge
#define COMP_TRIG_RISE 0x00000840 // Trigger on rising edge
#define COMP_TRIG_BOTH 0x00000860 // Trigger on both edges
#define COMP_INT_HIGH 0x00000010 // Interrupt when high
#define COMP_INT_LOW 0x00000000 // Interrupt when low
#define COMP_INT_FALL 0x00000004 // Interrupt on falling edge
#define COMP_INT_RISE 0x00000008 // Interrupt on rising edge
#define COMP_INT_BOTH 0x0000000C // Interrupt on both edges
#define COMP_ASRCP_PIN 0x00000000 // Dedicated Comp+ pin
#define COMP_ASRCP_PIN0 0x00000200 // Comp0+ pin
#define COMP_ASRCP_REF 0x00000400 // Internal voltage reference
#define COMP_OUTPUT_NONE 0x00000000 // No comparator output
#define COMP_OUTPUT_NORMAL 0x00000100 // Comparator output normal
#define COMP_OUTPUT_INVERT 0x00000102 // Comparator output inverted
//*****************************************************************************
//
// Values that can be passed to ComparatorSetRef() as the ulRef parameter.
//
//*****************************************************************************
#define COMP_REF_OFF 0x00000000 // Turn off the internal reference
#define COMP_REF_0V 0x00000300 // Internal reference of 0V
#define COMP_REF_0_1375V 0x00000301 // Internal reference of 0.1375V
#define COMP_REF_0_275V 0x00000302 // Internal reference of 0.275V
#define COMP_REF_0_4125V 0x00000303 // Internal reference of 0.4125V
#define COMP_REF_0_55V 0x00000304 // Internal reference of 0.55V
#define COMP_REF_0_6875V 0x00000305 // Internal reference of 0.6875V
#define COMP_REF_0_825V 0x00000306 // Internal reference of 0.825V
#define COMP_REF_0_928125V 0x00000201 // Internal reference of 0.928125V
#define COMP_REF_0_9625V 0x00000307 // Internal reference of 0.9625V
#define COMP_REF_1_03125V 0x00000202 // Internal reference of 1.03125V
#define COMP_REF_1_134375V 0x00000203 // Internal reference of 1.134375V
#define COMP_REF_1_1V 0x00000308 // Internal reference of 1.1V
#define COMP_REF_1_2375V 0x00000309 // Internal reference of 1.2375V
#define COMP_REF_1_340625V 0x00000205 // Internal reference of 1.340625V
#define COMP_REF_1_375V 0x0000030A // Internal reference of 1.375V
#define COMP_REF_1_44375V 0x00000206 // Internal reference of 1.44375V
#define COMP_REF_1_5125V 0x0000030B // Internal reference of 1.5125V
#define COMP_REF_1_546875V 0x00000207 // Internal reference of 1.546875V
#define COMP_REF_1_65V 0x0000030C // Internal reference of 1.65V
#define COMP_REF_1_753125V 0x00000209 // Internal reference of 1.753125V
#define COMP_REF_1_7875V 0x0000030D // Internal reference of 1.7875V
#define COMP_REF_1_85625V 0x0000020A // Internal reference of 1.85625V
#define COMP_REF_1_925V 0x0000030E // Internal reference of 1.925V
#define COMP_REF_1_959375V 0x0000020B // Internal reference of 1.959375V
#define COMP_REF_2_0625V 0x0000030F // Internal reference of 2.0625V
#define COMP_REF_2_165625V 0x0000020D // Internal reference of 2.165625V
#define COMP_REF_2_26875V 0x0000020E // Internal reference of 2.26875V
#define COMP_REF_2_371875V 0x0000020F // Internal reference of 2.371875V
//*****************************************************************************
//
// Prototypes for the APIs.
//
//*****************************************************************************
extern void ComparatorConfigure(unsigned long ulBase, unsigned long ulComp,
unsigned long ulConfig);
extern void ComparatorRefSet(unsigned long ulBase, unsigned long ulRef);
extern tBoolean ComparatorValueGet(unsigned long ulBase, unsigned long ulComp);
extern void ComparatorIntRegister(unsigned long ulBase, unsigned long ulComp,
void (*pfnHandler)(void));
extern void ComparatorIntUnregister(unsigned long ulBase,
unsigned long ulComp);
extern void ComparatorIntEnable(unsigned long ulBase, unsigned long ulComp);
extern void ComparatorIntDisable(unsigned long ulBase, unsigned long ulComp);
extern tBoolean ComparatorIntStatus(unsigned long ulBase, unsigned long ulComp,
tBoolean bMasked);
extern void ComparatorIntClear(unsigned long ulBase, unsigned long ulComp);
#ifdef __cplusplus
}
#endif
#endif // __COMP_H__