blob: ebe01cb99416cef1320bcd08342c996208bb84ec [file] [log] [blame]
//*****************************************************************************
//
// sysctl.h - Prototypes for the system control driver.
//
// Copyright (c) 2005,2006 Luminary Micro, Inc. All rights reserved.
//
// Software License Agreement
//
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and
// exclusively on LMI's Stellaris Family of microcontroller products.
//
// The software is owned by LMI and/or its suppliers, and is protected under
// applicable copyright laws. All rights are reserved. Any use in violation
// of the foregoing restrictions may subject the user to criminal sanctions
// under applicable laws, as well as to civil liability for the breach of the
// terms and conditions of this license.
//
// THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 991 of the Stellaris Driver Library.
//
//*****************************************************************************
#ifndef __SYSCTL_H__
#define __SYSCTL_H__
#ifdef __cplusplus
extern "C"
{
#endif
//*****************************************************************************
//
// The following are values that can be passed to the
// SysCtlPeripheralPresent(), SysCtlPeripheralEnable(),
// SysCtlPeripheralDisable(), and SysCtlPeripheralReset() APIs as the
// ulPeripheral parameter. The peripherals in the fourth group (upper nibble
// is 3) can only be used with the SysCtlPeripheralPresent() API.
//
//*****************************************************************************
#define SYSCTL_PERIPH_PWM 0x00100000 // PWM
#define SYSCTL_PERIPH_ADC 0x00010000 // ADC
#define SYSCTL_PERIPH_WDOG 0x00000008 // Watchdog
#define SYSCTL_PERIPH_UART0 0x10000001 // UART 0
#define SYSCTL_PERIPH_UART1 0x10000002 // UART 1
#define SYSCTL_PERIPH_SSI 0x10000010 // SSI
#define SYSCTL_PERIPH_QEI 0x10000100 // QEI
#define SYSCTL_PERIPH_I2C 0x10001000 // I2C
#define SYSCTL_PERIPH_TIMER0 0x10010000 // Timer 0
#define SYSCTL_PERIPH_TIMER1 0x10020000 // Timer 1
#define SYSCTL_PERIPH_TIMER2 0x10040000 // Timer 2
#define SYSCTL_PERIPH_COMP0 0x11000000 // Analog comparator 0
#define SYSCTL_PERIPH_COMP1 0x12000000 // Analog comparator 1
#define SYSCTL_PERIPH_COMP2 0x14000000 // Analog comparator 2
#define SYSCTL_PERIPH_GPIOA 0x20000001 // GPIO A
#define SYSCTL_PERIPH_GPIOB 0x20000002 // GPIO B
#define SYSCTL_PERIPH_GPIOC 0x20000004 // GPIO C
#define SYSCTL_PERIPH_GPIOD 0x20000008 // GPIO D
#define SYSCTL_PERIPH_GPIOE 0x20000010 // GPIO E
#define SYSCTL_PERIPH_MPU 0x30000080 // Cortex-M3 MPU
#define SYSCTL_PERIPH_TEMP 0x30000020 // Temperature sensor
#define SYSCTL_PERIPH_PLL 0x30000010 // PLL
//*****************************************************************************
//
// The following are values that can be passed to the SysCtlPinPresent() API
// as the ulPin parameter.
//
//*****************************************************************************
#define SYSCTL_PIN_PWM0 0x00000001 // PWM0 pin
#define SYSCTL_PIN_PWM1 0x00000002 // PWM1 pin
#define SYSCTL_PIN_PWM2 0x00000004 // PWM2 pin
#define SYSCTL_PIN_PWM3 0x00000008 // PWM3 pin
#define SYSCTL_PIN_PWM4 0x00000010 // PWM4 pin
#define SYSCTL_PIN_PWM5 0x00000020 // PWM5 pin
#define SYSCTL_PIN_C0MINUS 0x00000040 // C0- pin
#define SYSCTL_PIN_C0PLUS 0x00000080 // C0+ pin
#define SYSCTL_PIN_C0O 0x00000100 // C0o pin
#define SYSCTL_PIN_C1MINUS 0x00000200 // C1- pin
#define SYSCTL_PIN_C1PLUS 0x00000400 // C1+ pin
#define SYSCTL_PIN_C1O 0x00000800 // C1o pin
#define SYSCTL_PIN_C2MINUS 0x00001000 // C2- pin
#define SYSCTL_PIN_C2PLUS 0x00002000 // C2+ pin
#define SYSCTL_PIN_C2O 0x00004000 // C2o pin
#define SYSCTL_PIN_ADC0 0x00010000 // ADC0 pin
#define SYSCTL_PIN_ADC1 0x00020000 // ADC1 pin
#define SYSCTL_PIN_ADC2 0x00040000 // ADC2 pin
#define SYSCTL_PIN_ADC3 0x00080000 // ADC3 pin
#define SYSCTL_PIN_ADC4 0x00100000 // ADC4 pin
#define SYSCTL_PIN_ADC5 0x00200000 // ADC5 pin
#define SYSCTL_PIN_ADC6 0x00400000 // ADC6 pin
#define SYSCTL_PIN_ADC7 0x00800000 // ADC7 pin
#define SYSCTL_PIN_CCP0 0x01000000 // CCP0 pin
#define SYSCTL_PIN_CCP1 0x02000000 // CCP1 pin
#define SYSCTL_PIN_CCP2 0x04000000 // CCP2 pin
#define SYSCTL_PIN_CCP3 0x08000000 // CCP3 pin
#define SYSCTL_PIN_CCP4 0x10000000 // CCP4 pin
#define SYSCTL_PIN_CCP5 0x20000000 // CCP5 pin
#define SYSCTL_PIN_32KHZ 0x80000000 // 32kHz pin
//*****************************************************************************
//
// The following are values that can be passed to the SysCtlLDOSet() API as
// the ulVoltage value, or returned by the SysCtlLDOGet() API.
//
//*****************************************************************************
#define SYSCTL_LDO_2_25V 0x00000005 // LDO output of 2.25V
#define SYSCTL_LDO_2_30V 0x00000004 // LDO output of 2.30V
#define SYSCTL_LDO_2_35V 0x00000003 // LDO output of 2.35V
#define SYSCTL_LDO_2_40V 0x00000002 // LDO output of 2.40V
#define SYSCTL_LDO_2_45V 0x00000001 // LDO output of 2.45V
#define SYSCTL_LDO_2_50V 0x00000000 // LDO output of 2.50V
#define SYSCTL_LDO_2_55V 0x0000001f // LDO output of 2.55V
#define SYSCTL_LDO_2_60V 0x0000001e // LDO output of 2.60V
#define SYSCTL_LDO_2_65V 0x0000001d // LDO output of 2.65V
#define SYSCTL_LDO_2_70V 0x0000001c // LDO output of 2.70V
#define SYSCTL_LDO_2_75V 0x0000001b // LDO output of 2.75V
//*****************************************************************************
//
// The following are values that can be passed to the SysCtlLDOConfigSet() API.
//
//*****************************************************************************
#define SYSCTL_LDOCFG_ARST 0x00000001 // Allow LDO failure to reset
#define SYSCTL_LDOCFG_NORST 0x00000000 // Do not reset on LDO failure
//*****************************************************************************
//
// The following are values that can be passed to the SysCtlIntEnable(),
// SysCtlIntDisable(), and SysCtlIntClear() APIs, or returned in the bit mask
// by the SysCtlIntStatus() API.
//
//*****************************************************************************
#define SYSCTL_INT_PLL_LOCK 0x00000040 // PLL lock interrupt
#define SYSCTL_INT_CUR_LIMIT 0x00000020 // Current limit interrupt
#define SYSCTL_INT_IOSC_FAIL 0x00000010 // Internal oscillator failure int
#define SYSCTL_INT_MOSC_FAIL 0x00000008 // Main oscillator failure int
#define SYSCTL_INT_POR 0x00000004 // Power on reset interrupt
#define SYSCTL_INT_BOR 0x00000002 // Brown out interrupt
#define SYSCTL_INT_PLL_FAIL 0x00000001 // PLL failure interrupt
//*****************************************************************************
//
// The following are values that can be passed to the SysCtlResetCauseClear()
// API or returned by the SysCtlResetCauseGet() API.
//
//*****************************************************************************
#define SYSCTL_CAUSE_LDO 0x00000020 // LDO power not OK reset
#define SYSCTL_CAUSE_SW 0x00000010 // Software reset
#define SYSCTL_CAUSE_WDOG 0x00000008 // Watchdog reset
#define SYSCTL_CAUSE_BOR 0x00000004 // Brown-out reset
#define SYSCTL_CAUSE_POR 0x00000002 // Power on reset
#define SYSCTL_CAUSE_EXT 0x00000001 // External reset
//*****************************************************************************
//
// The following are values that can be passed to the SysCtlBrownOutConfigSet()
// API as the ulConfig parameter.
//
//*****************************************************************************
#define SYSCTL_BOR_RESET 0x00000002 // Reset instead of interrupting
#define SYSCTL_BOR_RESAMPLE 0x00000001 // Resample BOR before asserting
//*****************************************************************************
//
// The following are values that can be passed to the SysCtlPWMClockSet() API
// as the ulConfig parameter, and can be returned by the SysCtlPWMClockGet()
// API.
//
//*****************************************************************************
#define SYSCTL_PWMDIV_1 0x00000000 // PWM clock is processor clock /1
#define SYSCTL_PWMDIV_2 0x00100000 // PWM clock is processor clock /2
#define SYSCTL_PWMDIV_4 0x00120000 // PWM clock is processor clock /4
#define SYSCTL_PWMDIV_8 0x00140000 // PWM clock is processor clock /8
#define SYSCTL_PWMDIV_16 0x00160000 // PWM clock is processor clock /16
#define SYSCTL_PWMDIV_32 0x00180000 // PWM clock is processor clock /32
#define SYSCTL_PWMDIV_64 0x001A0000 // PWM clock is processor clock /64
//*****************************************************************************
//
// The following are values that can be passed to the SysCtlADCSpeedSet() API
// as the ulSpeed parameter, and can be returned by the SyCtlADCSpeedGet()
// API.
//
//*****************************************************************************
#define SYSCTL_ADCSPEED_1MSPS 0x00000300 // 1,000,000 samples per second
#define SYSCTL_ADCSPEED_500KSPS 0x00000200 // 500,000 samples per second
#define SYSCTL_ADCSPEED_250KSPS 0x00000100 // 250,000 samples per second
#define SYSCTL_ADCSPEED_125KSPS 0x00000000 // 125,000 samples per second
//*****************************************************************************
//
// The following are values that can be passed to the SysCtlClockSet() API as
// the ulConfig parameter.
//
//*****************************************************************************
#define SYSCTL_SYSDIV_1 0x07800000 // Processor clock is osc/pll /1
#define SYSCTL_SYSDIV_2 0x00C00000 // Processor clock is osc/pll /2
#define SYSCTL_SYSDIV_3 0x01400000 // Processor clock is osc/pll /3
#define SYSCTL_SYSDIV_4 0x01C00000 // Processor clock is osc/pll /4
#define SYSCTL_SYSDIV_5 0x02400000 // Processor clock is osc/pll /5
#define SYSCTL_SYSDIV_6 0x02C00000 // Processor clock is osc/pll /6
#define SYSCTL_SYSDIV_7 0x03400000 // Processor clock is osc/pll /7
#define SYSCTL_SYSDIV_8 0x03C00000 // Processor clock is osc/pll /8
#define SYSCTL_SYSDIV_9 0x04400000 // Processor clock is osc/pll /9
#define SYSCTL_SYSDIV_10 0x04C00000 // Processor clock is osc/pll /10
#define SYSCTL_SYSDIV_11 0x05400000 // Processor clock is osc/pll /11
#define SYSCTL_SYSDIV_12 0x05C00000 // Processor clock is osc/pll /12
#define SYSCTL_SYSDIV_13 0x06400000 // Processor clock is osc/pll /13
#define SYSCTL_SYSDIV_14 0x06C00000 // Processor clock is osc/pll /14
#define SYSCTL_SYSDIV_15 0x07400000 // Processor clock is osc/pll /15
#define SYSCTL_SYSDIV_16 0x07C00000 // Processor clock is osc/pll /16
#define SYSCTL_USE_PLL 0x00000000 // System clock is the PLL clock
#define SYSCTL_USE_OSC 0x00003800 // System clock is the osc clock
#define SYSCTL_XTAL_3_57MHZ 0x00000100 // External crystal is 3.579545MHz
#define SYSCTL_XTAL_3_68MHZ 0x00000140 // External crystal is 3.6864MHz
#define SYSCTL_XTAL_4MHZ 0x00000180 // External crystal is 4MHz
#define SYSCTL_XTAL_4_09MHZ 0x000001C0 // External crystal is 4.096MHz
#define SYSCTL_XTAL_4_91MHZ 0x00000200 // External crystal is 4.9152MHz
#define SYSCTL_XTAL_5MHZ 0x00000240 // External crystal is 5MHz
#define SYSCTL_XTAL_5_12MHZ 0x00000280 // External crystal is 5.12MHz
#define SYSCTL_XTAL_6MHZ 0x000002C0 // External crystal is 6MHz
#define SYSCTL_XTAL_6_14MHZ 0x00000300 // External crystal is 6.144MHz
#define SYSCTL_XTAL_7_37MHZ 0x00000340 // External crystal is 7.3728MHz
#define SYSCTL_XTAL_8MHZ 0x00000380 // External crystal is 8MHz
#define SYSCTL_XTAL_8_19MHZ 0x000003C0 // External crystal is 8.192MHz
#define SYSCTL_OSC_MAIN 0x00000000 // Oscillator source is main osc
#define SYSCTL_OSC_INT 0x00000010 // Oscillator source is int. osc
#define SYSCTL_OSC_INT4 0x00000020 // Oscillator source is int. osc /4
#define SYSCTL_INT_OSC_DIS 0x00000002 // Disable internal oscillator
#define SYSCTL_MAIN_OSC_DIS 0x00000001 // Disable main oscillator
//*****************************************************************************
//
// Prototypes for the APIs.
//
//*****************************************************************************
extern unsigned long SysCtlSRAMSizeGet(void);
extern unsigned long SysCtlFlashSizeGet(void);
extern tBoolean SysCtlPinPresent(unsigned long ulPin);
extern tBoolean SysCtlPeripheralPresent(unsigned long ulPeripheral);
extern void SysCtlPeripheralReset(unsigned long ulPeripheral);
extern void SysCtlPeripheralEnable(unsigned long ulPeripheral);
extern void SysCtlPeripheralDisable(unsigned long ulPeripheral);
extern void SysCtlPeripheralSleepEnable(unsigned long ulPeripheral);
extern void SysCtlPeripheralSleepDisable(unsigned long ulPeripheral);
extern void SysCtlPeripheralDeepSleepEnable(unsigned long ulPeripheral);
extern void SysCtlPeripheralDeepSleepDisable(unsigned long ulPeripheral);
extern void SysCtlPeripheralClockGating(tBoolean bEnable);
extern void SysCtlIntRegister(void (*pfnHandler)(void));
extern void SysCtlIntUnregister(void);
extern void SysCtlIntEnable(unsigned long ulInts);
extern void SysCtlIntDisable(unsigned long ulInts);
extern void SysCtlIntClear(unsigned long ulInts);
extern unsigned long SysCtlIntStatus(tBoolean bMasked);
extern void SysCtlLDOSet(unsigned long ulVoltage);
extern unsigned long SysCtlLDOGet(void);
extern void SysCtlLDOConfigSet(unsigned long ulConfig);
extern void SysCtlReset(void);
extern void SysCtlSleep(void);
extern void SysCtlDeepSleep(void);
extern unsigned long SysCtlResetCauseGet(void);
extern void SysCtlResetCauseClear(unsigned long ulCauses);
extern void SysCtlBrownOutConfigSet(unsigned long ulConfig,
unsigned long ulDelay);
extern void SysCtlClockSet(unsigned long ulConfig);
extern unsigned long SysCtlClockGet(void);
extern void SysCtlPWMClockSet(unsigned long ulConfig);
extern unsigned long SysCtlPWMClockGet(void);
extern void SysCtlADCSpeedSet(unsigned long ulSpeed);
extern unsigned long SysCtlADCSpeedGet(void);
extern void SysCtlIOSCVerificationSet(tBoolean bEnable);
extern void SysCtlMOSCVerificationSet(tBoolean bEnable);
extern void SysCtlPLLVerificationSet(tBoolean bEnable);
extern void SysCtlClkVerificationClear(void);
#ifdef __cplusplus
}
#endif
#endif // __SYSCTL_H__