| /** | |
| * \file | |
| * | |
| * Copyright (c) 2012 Atmel Corporation. All rights reserved. | |
| * | |
| * \asf_license_start | |
| * | |
| * \page License | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * | |
| * 1. Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the following disclaimer. | |
| * | |
| * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| * this list of conditions and the following disclaimer in the documentation | |
| * and/or other materials provided with the distribution. | |
| * | |
| * 3. The name of Atmel may not be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * 4. This software may only be redistributed and used in connection with an | |
| * Atmel microcontroller product. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED | |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE | |
| * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR | |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN | |
| * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * \asf_license_stop | |
| * | |
| */ | |
| #ifndef _SAM3S8_UART0_INSTANCE_ | |
| #define _SAM3S8_UART0_INSTANCE_ | |
| /* ========== Register definition for UART0 peripheral ========== */ | |
| #if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) | |
| #define REG_UART0_CR (0x400E0600U) /**< \brief (UART0) Control Register */ | |
| #define REG_UART0_MR (0x400E0604U) /**< \brief (UART0) Mode Register */ | |
| #define REG_UART0_IER (0x400E0608U) /**< \brief (UART0) Interrupt Enable Register */ | |
| #define REG_UART0_IDR (0x400E060CU) /**< \brief (UART0) Interrupt Disable Register */ | |
| #define REG_UART0_IMR (0x400E0610U) /**< \brief (UART0) Interrupt Mask Register */ | |
| #define REG_UART0_SR (0x400E0614U) /**< \brief (UART0) Status Register */ | |
| #define REG_UART0_RHR (0x400E0618U) /**< \brief (UART0) Receive Holding Register */ | |
| #define REG_UART0_THR (0x400E061CU) /**< \brief (UART0) Transmit Holding Register */ | |
| #define REG_UART0_BRGR (0x400E0620U) /**< \brief (UART0) Baud Rate Generator Register */ | |
| #define REG_UART0_RPR (0x400E0700U) /**< \brief (UART0) Receive Pointer Register */ | |
| #define REG_UART0_RCR (0x400E0704U) /**< \brief (UART0) Receive Counter Register */ | |
| #define REG_UART0_TPR (0x400E0708U) /**< \brief (UART0) Transmit Pointer Register */ | |
| #define REG_UART0_TCR (0x400E070CU) /**< \brief (UART0) Transmit Counter Register */ | |
| #define REG_UART0_RNPR (0x400E0710U) /**< \brief (UART0) Receive Next Pointer Register */ | |
| #define REG_UART0_RNCR (0x400E0714U) /**< \brief (UART0) Receive Next Counter Register */ | |
| #define REG_UART0_TNPR (0x400E0718U) /**< \brief (UART0) Transmit Next Pointer Register */ | |
| #define REG_UART0_TNCR (0x400E071CU) /**< \brief (UART0) Transmit Next Counter Register */ | |
| #define REG_UART0_PTCR (0x400E0720U) /**< \brief (UART0) Transfer Control Register */ | |
| #define REG_UART0_PTSR (0x400E0724U) /**< \brief (UART0) Transfer Status Register */ | |
| #else | |
| #define REG_UART0_CR (*(WoReg*)0x400E0600U) /**< \brief (UART0) Control Register */ | |
| #define REG_UART0_MR (*(RwReg*)0x400E0604U) /**< \brief (UART0) Mode Register */ | |
| #define REG_UART0_IER (*(WoReg*)0x400E0608U) /**< \brief (UART0) Interrupt Enable Register */ | |
| #define REG_UART0_IDR (*(WoReg*)0x400E060CU) /**< \brief (UART0) Interrupt Disable Register */ | |
| #define REG_UART0_IMR (*(RoReg*)0x400E0610U) /**< \brief (UART0) Interrupt Mask Register */ | |
| #define REG_UART0_SR (*(RoReg*)0x400E0614U) /**< \brief (UART0) Status Register */ | |
| #define REG_UART0_RHR (*(RoReg*)0x400E0618U) /**< \brief (UART0) Receive Holding Register */ | |
| #define REG_UART0_THR (*(WoReg*)0x400E061CU) /**< \brief (UART0) Transmit Holding Register */ | |
| #define REG_UART0_BRGR (*(RwReg*)0x400E0620U) /**< \brief (UART0) Baud Rate Generator Register */ | |
| #define REG_UART0_RPR (*(RwReg*)0x400E0700U) /**< \brief (UART0) Receive Pointer Register */ | |
| #define REG_UART0_RCR (*(RwReg*)0x400E0704U) /**< \brief (UART0) Receive Counter Register */ | |
| #define REG_UART0_TPR (*(RwReg*)0x400E0708U) /**< \brief (UART0) Transmit Pointer Register */ | |
| #define REG_UART0_TCR (*(RwReg*)0x400E070CU) /**< \brief (UART0) Transmit Counter Register */ | |
| #define REG_UART0_RNPR (*(RwReg*)0x400E0710U) /**< \brief (UART0) Receive Next Pointer Register */ | |
| #define REG_UART0_RNCR (*(RwReg*)0x400E0714U) /**< \brief (UART0) Receive Next Counter Register */ | |
| #define REG_UART0_TNPR (*(RwReg*)0x400E0718U) /**< \brief (UART0) Transmit Next Pointer Register */ | |
| #define REG_UART0_TNCR (*(RwReg*)0x400E071CU) /**< \brief (UART0) Transmit Next Counter Register */ | |
| #define REG_UART0_PTCR (*(WoReg*)0x400E0720U) /**< \brief (UART0) Transfer Control Register */ | |
| #define REG_UART0_PTSR (*(RoReg*)0x400E0724U) /**< \brief (UART0) Transfer Status Register */ | |
| #endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ | |
| #endif /* _SAM3S8_UART0_INSTANCE_ */ |