blob: 56ba72b3a38b3db7fcce550f30e14116d7e13e7e [file] [log] [blame]
/**********************************************************************
* $Id$ lpc18xx_evrt.c 2011-06-02
*//**
* @file lpc18xx_evrt.c
* @brief Contains all functions support for Event Router firmware
* library on LPC18xx
* @version 1.0
* @date 02. June. 2011
* @author NXP MCU SW Application Team
*
* Copyright(C) 2011, NXP Semiconductor
* All rights reserved.
*
***********************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
**********************************************************************/
/* Peripheral group ----------------------------------------------------------- */
/** @addtogroup EVRT
* @{
*/
/* Includes ------------------------------------------------------------------- */
#include "lpc18xx_evrt.h"
/* If this source file built with example, the LPC18xx FW library configuration
* file in each example directory ("lpc18xx_libcfg.h") must be included,
* otherwise the default FW library configuration file must be included instead
*/
#ifdef __BUILD_WITH_EXAMPLE__
#include "lpc18xx_libcfg.h"
#else
#include "lpc18xx_libcfg_default.h"
#endif /* __BUILD_WITH_EXAMPLE__ */
/* Public Functions ----------------------------------------------------------- */
/** @addtogroup EVRT_Public_Functions
* @{
*/
/********************************************************************//**
* @brief Initializes the EVRT peripheral.
* @param[in] EVRTx EVRT peripheral selected, should be: LPC_EVRT
* @return None
*********************************************************************/
void EVRT_Init (LPC_EVENTROUTER_Type *EVRTx)
{
uint8_t i=0;
CHECK_PARAM(PARAM_EVRTx(EVRTx));
// Clear all register to be default
EVRTx->HILO = 0x0000;
EVRTx->EDGE = 0x0000;
EVRTx->CLR_EN = 0xFFFF;
do
{
i++;
EVRTx->CLR_STAT = 0xFFFFF;
}while((EVRTx->STATUS != 0)&&(i<10));
}
/*********************************************************************//**
* @brief De-initializes the EVRT peripheral registers to their
* default reset values.
* @param[in] EVRTx EVRT peripheral selected, should be: LPC_EVRT
* @return None
**********************************************************************/
void EVRT_DeInit(LPC_EVENTROUTER_Type *EVRTx)
{
CHECK_PARAM(PARAM_EVRTx(EVRTx));
EVRTx->CLR_EN = 0xFFFF;
EVRTx->CLR_STAT = 0xFFFF;
}
/*********************************************************************//**
* @brief Setting up the type of interrupt sources to EVRT
* @param[in] EVRTx EVRT peripheral selected, should be: LPC_EVRT
* @param[in] EVRT_Src EVRT source, should be:
* - EVRT_SRC_WAKEUP0 :WAKEUP0 event
* - EVRT_SRC_WAKEUP1 :WAKEUP1 event
* - EVRT_SRC_WAKEUP2 :WAKEUP2 event
* - EVRT_SRC_WAKEUP3 :WAKEUP3 event
* - EVRT_SRC_ATIMER :Alarm timer eveny
* - EVRT_SRC_RTC :RTC event
* - EVRT_SRC_BOD :BOD event
* - EVRT_SRC_WWDT :WWDT event
* - EVRT_SRC_ETHERNET :ETHERNET event
* - EVRT_SRC_USB0 :USB0 event
* - EVRT_SRC_USB1 :USB1 event
* - EVRT_SRC_CCAN :CCAN event
* - EVRT_SRC_COMBINE_TIMER2 :Combined timer output 2 event
* - EVRT_SRC_COMBINE_TIMER6 :Combined timer output 6 event
* - EVRT_SRC_QEI :QEI event
* - EVRT_SRC_COMBINE_TIMER14 :Combined timer output 14 event
* - EVRT_SRC_RESET :RESET event
* type Active type, should be:
* - EVRT_SRC_ACTIVE_LOW_LEVEL :Active low level
* - EVRT_SRC_ACTIVE_HIGH_LEVEL :Active high level
* - EVRT_SRC_ACTIVE_FALLING_EDGE :Active falling edge
* - EVRT_SRC_ACTIVE_RISING_EDGE :Active rising edge
* @param[in] type EVRT source active type, should be:
* - EVRT_SRC_ACTIVE_LOW_LEVEL :Active low level
* - EVRT_SRC_ACTIVE_HIGH_LEVEL :Active high level
* - EVRT_SRC_ACTIVE_FALLING_EDGE :Active falling edge
* - EVRT_SRC_ACTIVE_RISING_EDGE :Active rising edge
* @return None
**********************************************************************/
void EVRT_ConfigIntSrcActiveType(LPC_EVENTROUTER_Type *EVRTx, EVRT_SRC_ENUM EVRT_Src, EVRT_SRC_ACTIVE_TYPE type)
{
CHECK_PARAM(PARAM_EVRTx(EVRTx));
CHECK_PARAM(PARAM_EVRT_SOURCE(EVRT_Src));
CHECK_PARAM(PARAM_EVRT_SOURCE_ACTIVE_TYPE(type));
switch (type)
{
case EVRT_SRC_ACTIVE_LOW_LEVEL:
EVRTx->HILO &= ~(1<<(uint8_t)EVRT_Src);
EVRTx->EDGE &= ~(1<<(uint8_t)EVRT_Src);
break;
case EVRT_SRC_ACTIVE_HIGH_LEVEL:
EVRTx->HILO |= (1<<(uint8_t)EVRT_Src);
EVRTx->EDGE &= ~(1<<(uint8_t)EVRT_Src);
break;
case EVRT_SRC_ACTIVE_FALLING_EDGE:
EVRTx->HILO &= ~(1<<(uint8_t)EVRT_Src);
EVRTx->EDGE |= (1<<(uint8_t)EVRT_Src);
break;
case EVRT_SRC_ACTIVE_RISING_EDGE:
EVRTx->HILO |= (1<<(uint8_t)EVRT_Src);
EVRTx->EDGE |= (1<<(uint8_t)EVRT_Src);
break;
default:
break;
}
}
/*********************************************************************//**
* @brief Enable or disable interrupt sources to EVRT
* @param[in] EVRTx EVRT peripheral selected, should be LPC_EVRT
* @param[in] EVRT_Src EVRT source, should be:
* - EVRT_SRC_WAKEUP0 :WAKEUP0 event
* - EVRT_SRC_WAKEUP1 :WAKEUP1 event
* - EVRT_SRC_WAKEUP2 :WAKEUP2 event
* - EVRT_SRC_WAKEUP3 :WAKEUP3 event
* - EVRT_SRC_ATIMER :Alarm timer eveny
* - EVRT_SRC_RTC :RTC event
* - EVRT_SRC_BOD :BOD event
* - EVRT_SRC_WWDT :WWDT event
* - EVRT_SRC_ETHERNET :ETHERNET event
* - EVRT_SRC_USB0 :USB0 event
* - EVRT_SRC_USB1 :USB1 event
* - EVRT_SRC_CCAN :CCAN event
* - EVRT_SRC_COMBINE_TIMER2 :Combined timer output 2 event
* - EVRT_SRC_COMBINE_TIMER6 :Combined timer output 6 event
* - EVRT_SRC_QEI :QEI event
* - EVRT_SRC_COMBINE_TIMER14 :Combined timer output 14 event
* - EVRT_SRC_RESET :RESET event
* @param[in] state ENABLE or DISABLE
* @return None
**********************************************************************/
void EVRT_SetUpIntSrc(LPC_EVENTROUTER_Type *EVRTx, EVRT_SRC_ENUM EVRT_Src, FunctionalState state)
{
CHECK_PARAM(PARAM_EVRTx(EVRTx));
CHECK_PARAM(PARAM_EVRT_SOURCE(EVRT_Src));
if(state == ENABLE)
EVRTx->SET_EN = (1<<(uint8_t)EVRT_Src);
else
EVRTx->CLR_EN = (1<<(uint8_t)EVRT_Src);
}
/*********************************************************************//**
* @brief Check if a source is sending interrupt to EVRT
* @param[in] EVRTx EVRT peripheral selected, should be LPC_EVRT
* @param[in] EVRT_Src EVRT source, should be:
* - EVRT_SRC_WAKEUP0 :WAKEUP0 event
* - EVRT_SRC_WAKEUP1 :WAKEUP1 event
* - EVRT_SRC_WAKEUP2 :WAKEUP2 event
* - EVRT_SRC_WAKEUP3 :WAKEUP3 event
* - EVRT_SRC_ATIMER :Alarm timer eveny
* - EVRT_SRC_RTC :RTC event
* - EVRT_SRC_BOD :BOD event
* - EVRT_SRC_WWDT :WWDT event
* - EVRT_SRC_ETHERNET :ETHERNET event
* - EVRT_SRC_USB0 :USB0 event
* - EVRT_SRC_USB1 :USB1 event
* - EVRT_SRC_CCAN :CCAN event
* - EVRT_SRC_COMBINE_TIMER2 :Combined timer output 2 event
* - EVRT_SRC_COMBINE_TIMER6 :Combined timer output 6 event
* - EVRT_SRC_QEI :QEI event
* - EVRT_SRC_COMBINE_TIMER14 :Combined timer output 14 event
* - EVRT_SRC_RESET :RESET event
* @return TRUE or FALSE
**********************************************************************/
Bool EVRT_IsSourceInterrupting(LPC_EVENTROUTER_Type *EVRTx, EVRT_SRC_ENUM EVRT_Src)
{
CHECK_PARAM(PARAM_EVRTx(EVRTx));
CHECK_PARAM(PARAM_EVRT_SOURCE(EVRT_Src));
if(EVRTx->STATUS & (1<<(uint8_t)EVRT_Src))
return TRUE;
else return FALSE;
}
/*********************************************************************//**
* @brief Clear pending interrupt EVRT source
* @param[in] EVRTx EVRT peripheral selected, should be LPC_EVRT
* @param[in] EVRT_Src EVRT source, should be:
* - EVRT_SRC_WAKEUP0 :WAKEUP0 event
* - EVRT_SRC_WAKEUP1 :WAKEUP1 event
* - EVRT_SRC_WAKEUP2 :WAKEUP2 event
* - EVRT_SRC_WAKEUP3 :WAKEUP3 event
* - EVRT_SRC_ATIMER :Alarm timer eveny
* - EVRT_SRC_RTC :RTC event
* - EVRT_SRC_BOD :BOD event
* - EVRT_SRC_WWDT :WWDT event
* - EVRT_SRC_ETHERNET :ETHERNET event
* - EVRT_SRC_USB0 :USB0 event
* - EVRT_SRC_USB1 :USB1 event
* - EVRT_SRC_CCAN :CCAN event
* - EVRT_SRC_COMBINE_TIMER2 :Combined timer output 2 event
* - EVRT_SRC_COMBINE_TIMER6 :Combined timer output 6 event
* - EVRT_SRC_QEI :QEI event
* - EVRT_SRC_COMBINE_TIMER14 :Combined timer output 14 event
* - EVRT_SRC_RESET :RESET event
* @return none
**********************************************************************/
void EVRT_ClrPendIntSrc(LPC_EVENTROUTER_Type *EVRTx, EVRT_SRC_ENUM EVRT_Src)
{
CHECK_PARAM(PARAM_EVRTx(EVRTx));
CHECK_PARAM(PARAM_EVRT_SOURCE(EVRT_Src));
EVRTx->CLR_STAT = (1<<(uint8_t)EVRT_Src);
}
/**
* @}
*/
/**
* @}
*/
/* --------------------------------- End Of File ------------------------------ */